march 08-09, 2019
TRANSCRIPT
ICAMEN 2019
International Conference on
Advances in Mechanical Engineering and Nanotechnology March 08-09, 2019
Program Schedule
DAY – 1 (08/03/2019)
Time Activity Venue
8:30 AM to
10:00 AM Registration
Foyer Smt. Sharada Pai Auditorium,
2AB
10.05 AM –
11.00AM
Inaugural Ceremony
Smt. Sharada Pai Auditorium, 2AB
11.00 AM 11.30
AM Group Photo and Hi-Tea
Foyer Smt. Sharada Pai Auditorium,
2AB
11:30 PM- 12:15
PM
Plenary Session
Professor Rizalman Mamat, FoE, UMP, Malasyia
Smt. Sharada Pai Auditorium, 2AB
12:15 PM- 1.00 PM
Keynote Session
Dr. Sevi Murugal, DU, New Delhi
Smt. Sharada Pai Auditorium, 2AB
1:00 PM- 2:00 PM Lunch Old Food Court
2.00 PM- 4.00 PM
Technical Session 1 (Thermal)
Technical Session 2 (Design)
Technical Session 3 (Materials/Nanotechnology)
Technical Session 4
(Manufacturing/Production)
Session Room 117C, 1AB
Session room 117D, 1AB
Session room 118A, 1AB
Session room 118D, 1AB
4.00 PM- 4.30 PM Tea Break
Foyer Smt. Sharada Pai Auditorium,
2AB
4.30 PM- 7.30 PM MUJ Campus Tour MUJ Campus
7:30 PM Banquet Dinner Old Food Court
DAY – 2 (09/03/2019)
9:00 AM to
9:30 AM
Keynote Session
Professor, Anupam Dewan, IIT Delhi Room No. 307, 1AB
9.30 AM –
10:00 AM
Keynote Session
Professor, Dilip Sharma, MNIT Jaipur
Room No. 307, 1AB
10:00 AM 10.30
AM Hi-Tea Foyer Third Floor, 1AB
11:00 AM- 1:00
PM
Technical Session 5 (Design)
Technical Session 6
(Materials/Nanotechnology)
Technical Session 7
(Manufacturing/Production)
Technical Session 8 (Thermal)
Session Room 117C, 1AB
Session room 117D, 1AB
Session room 118A, 1AB
Session room 118D, 1AB
1:00 PM- 2:00
PM Lunch Old Food Court
2.00 PM- 3.45
PM
Technical Session 9 (Design)
Technical Session 10
(Manufacturing/Production)
Session Room 117C, 1AB
Session Room 117D, 1AB
4.00 PM- 4.30
PM Conference Valedictory Room No. 307, 1AB
4:30 PM-5.00 PM
Tea Break Room No. 307, 1AB
End Of Conference
Technical Sessions
14:30 - 16:45
08-03-2019
Technical Session 1 [ Thermal and Energy]
Presentation Papers: THE1107, THE1110, THE1111, THE1112, THE1113, THE1117,
THE1122, THE1123
14:30 - 16:45
08-03-2019
Technical Session 2 [ Design Engineering]
Presentation Papers: DE3302, DE3304, DE3305, DE3306, DE3307, DE3309, DE3318,
DE3344
14:30 - 16:45
08-03-2019
Technical Session 3 [ Material Science/Nanotechnology]
Presentation Papers: MSE2205, MSE2209, MSE2216, MSE2221, MSE2222, MSE2223,
MSE2231, MSE2234, MSE2235,
14:30 - 16:45
08-03-2019
Technical Session 4 [ Manufacturing/Production]
Presentation Papers: PE4403, PE4404, PE4413, PE4416, PE4422, PE4426, PE4429, PE4430,
PE4449
11:00-13:00
09-03-2019
Technical Session 5 [Design Engineering]
Presentation Papers: DE3311, DE3317, DE3319, DE3324, DE3325, DE3326, DE3328,
DE3332, DE3333, DE3343
11:00-13:00
09-03-2019
Technical Session 6 [Material Science/Nanotechnology]
Presentation Papers: MSE2218, MSE2220, MSE2236, MSE2237, MSE2238, MSE2253,
MSE2256, MSE2257
11:00-13:00
09-03-2019
Technical Session 7 [Manufacturing/Production]
Presentation Papers: PE4428, PE4432, PE4436, PE4440, PE4442, PE4444, PE4453, PE4454
11:00-13:00
09-03-2019 Technical Session 8 [ Thermal and Energy]
Presentation Papers: THE1124, THE1125, THE1126, THE1128, THE1132, THE1144,
THE1145, THE1146
14:00-16:00
09-03-2019
Technical Session 9 [Design Engineering]
Presentation Papers: DE3312, DE3314, DE3320, DE3322, DE3323, DE3351 DE3362,
DE3365, DE3366, DE3310
14:00-16:00
09-03-2019
Technical Session 10 [Manufacturing/Production]
Presentation Papers: PE4443, PE4446, PE4450, PE4451, PE4457, PE4465, PE4467, PE4468
Technical Session-1
Theme- Thermal Engineering
Venue: 117C-1AB
Time: 2:30-4:30 PM
Session Chair: Dr Dheeraj Johar
Session Co-chair: Dr Shashi Bhushan
Sl. No. Paper Id Paper Title Author’s Name
1 THE1107
Computational Study of Coal Combustion in an Entrained Flow
Furnace
Nitesh Kumar Sahu,
Mayank Kumar and
Anupam Dewan
2 THE1110
Efficacy of Air Heat Exchanger Based Decay Heat Removal
System through Passive Mode: A Numerical Study
Elton D N,
Arunachala U C,
Dolfred V F
3 THE1111
Numerical Study Using Detailed Chemistry Combustion
Comparing Effects of Wall Heat Transfer Models for
Compression Ignition Diesel Engine
Akash Dayal,
Manish Shrivastava,
Rajiv Upadhyaya,
Lakhbir S Brar
4 THE1112
The Experimental Investigation on Single Cylinder Compression
Ignition Engine Fueled by Neem Biodiesel with Varying
Injection and Operating Parameters to Ensure Engine
Performance and Emission by Response Surface Methodology
Hardik B. Ramani and Dr.
Mohammad Israr
5 THE1113
Analysis of Solar Air Heater Performance in Transient Condition
with Various Broken V-Apex Gap
Prabudh Morya, Sheetal
Kumar Jain, Ghanshyam
Das Agrawal, Rohit Misra
6 THE1117
Effect of orientation angle in thermal performance analysis of a
horizontal heat sink of perforated pin fins
Pabitra Kumar Mandal,
Sayantan Sengupta, Subhas
Chandra Rana and Dipankar
Bhanja
7 THE1122
Conjugate Heat Transfer Due to Power Law Temperature in an
Annulus
Salman Ahmed N J, N.
Ameer Ahamad,
Maughal Ahmed Ali Baig,
Azeem
8 THE1123
Conjugate Heat Transfer in an Annulus due to Partial Heating-
Part I
Azeem, Maughal Ahmed
Ali Baig, H.M.T. Khaleed
9 THE1130
Optimization of Car Radiator Tube using Nano- Fluid as Coolant
- Taguchi Method
Gaurav Kumar
Chhapperwal, Ankur
Srivastava, Ashish Goyal
Technical Session-2
Theme- Design Engineering
Venue: 117D-1AB
Time: 2:30-4:30 PM
Session Chair: Dr TVVLN Rao
Session Co-chair: Dr Dhaneshwar Mishra
Sl. No. Paper Id Paper Title Author’s Name
1 DE3304
On Biomimetics in Machine Elements Design
Ivana D. Atanasovska and
Dejan B. Momcilovic
2 DE3302
An Investigation on Churning Power Loss of Worm Gear drive
through Experimentation & optimization techniques
Hardik G Chothani and Dr.
Kalpesh D Maniya
3 DE3305
Optimal design and analysis of oscillatory mechanism for
agricultural tillage operation
Gowripathi Rao, Himanshu
Chaudhary, and A.K.
Sharma
4 DE3306
A Proposed Concept for Fertilizer Placement under Three
Different Depths of Soil through Multilayered Fertilizer-cum-
Cotton Seed Drill Applicator
Nikhil V. Bhende Dr. Jayant
K. Purohit Anup A.
Junankar
5 DE3307
Automatic Solid Garbage Segregation Using Difference in
Lateral Switching Distance
Riya Jain, Shruthi
Anantharaman and Anil
Sharma.
6 DE3309
Analysis and Retardation of Helium Permeation for High
Altitude Airship Envelope Material
Durga Vasudevan,
Hariharan Mohan, Saarang
Gaggar and Ramesh Burela
Gupta
7 DE3344
Effect of microstructure on vibration analysis of partially cracked
thin orthotropic plate based on strain gradient theory
Shashank Soni, N. K. Jain,
P. V. Joshi
8 DE3334
Fluid-Structure Interaction Modelling of Physiological Loading-
Induced Canalicular Fluid Motion in Osteocyte Network
Abhishek Kumar Tiwari,
Rakesh Kumar, Dharmendra
Tripathi, Milan Khadiya
Technical Session-3
Theme- Material Science Engineering
Venue: 118A-1AB
Time: 2:30-4:30 PM
Session Chair: Dr Rahul Srivastava
Session Co-chair: Dr MK Dikshit
Sl.
No. Paper Id Paper Title Author’s Name
1 MSE2205
Effect of Micro Filler Reinforcement On Mechanical and Wear
Characteristics of Metal Matrix Composites: A Review
Pawandeep Singh, Vivudh
Gupta, R.K. Mishra, Balbir
Singh
2 MSE2209
Wear Behaviour of AA7075 based Composites: A State of the Art
Survey
Vivudh Gupta, Pawandeep
Singh, Balbir Singh, R.K.
Mishra
3 MSE2216
Behavior of Thermophysical Properties of Heat Treated CaO.Fe2O3
at Different Temperature
Vijay Kumar Pandey,
R.K.Duchaniya , U.Pandel ,
Surjeet Yadav
4 MSE2221
Study of Powder Consolidation of Cu-Cr Composites and Surface
Hardening of Aluminum in Ultrasonic Materials Processing
Dr. Mohammad Israr and
Dr.J.K.Dadhaniya
5 MSE2222
Tribological Behaviour of Functionalized Graphene Reinforced
Thermoplastic Polyurethane Elastomer Nanocomposites using
Molecular Dynamics Simulations
P A. Talapatra and D. Datta
6 MSE2223
A Review on Methods and Materials for Optimizing Thermionic
Regeneration System Kantaprasad kodihal and Dr.
Ankur Sagar
7 MSE2231
Sacrificial Polystyrene Template Assisted Synthesis of Tunable
Pore Size Hollow Core-Shell Silica Nanoparticles (HCSNs) for
Drug Delivery Application
Deepika D. and
Jagadeeshbabu P. E.
8 MSE2234
Processing and Characterization of Pine Epoxy Based Composites
Shakil Hossain, Md Mamunur
Rahman, Anbesh Jamwal,
Pallav Gupta, Sunil Thakur,
Sumit Gupta
9 MSE2235
Prediction of Thermal Residual Stresses in Sigmoid Functionally
Graded Materials
Rityuj Singh Parihar
Srinivasu Gangi Setti and
Raj Kumar Sahu
10 MSE2207
Wear Characteristics of WC-12Co and WC-10Ni HVOF Thermal
Sprayed Coating on Carbon Steel Blade
M.Nagentrau,
A.L.Mohd.Tobi, M.Sambu
and S.Jamian
Technical Session-4
Theme- Manufacturing/production
Venue: 118D-1AB
Time: 2:30-4:30 PM
Session Chair: Dr. Mohamad Israr
Session Co-chair: Dr Anand Pandey
Sl. No. Paper Id Paper Title Author’s Name
1 PE4403
Effective Utilization of Nanofluids for Machining Process
Enhancement Anup A. Junankar Jayant K.
Purohit, Nikhil V. Bhende
2 PE4404
Value Stream Mapping: A Case Study of Lock Industry
Pradip A. Parab and Dr.
Vinay A. Shirodkar
3 PE4413
To Study the Influence of Temperature on Strength during Free
Form Fabrication (FFF)
Achyut Trivedi and Pavan
Kumar Gurrala
4 PE4416
Predictive Analysis of Surface Roughness in Argon Assisted
EDM Using Semi-Empirical and ANN Techniques
Nishant K. Singh, Sandeep
Agrawal, Yashvir Singh,
Dilip Johari
5 PE4422
Lean Practices in Software Development Projects: A Literature
Review Ramkaran Yadav; M.L.
Mittal; Rakesh Jain.
6 PE4426
Influence of process parameters of Electrical Discharge
Machining on MRR, TWR and Surface roughness:
A Review
Sachidananda T G, M.
Sadiq A Pachapuri and
Chandrashekhar V Adake
7 PE4429
Human Resource Management in an Industrial
Scenario
Geeta Rani, Ravi Kumar
Gupta, Supriya Ashok
Bhandare
8 PE4430
Experimental investigation of C45 (AISI 1045) weldments
using SMAW and GMAW
Aamir R. Sayed Robin
Gupta Rohini Barai
9 PE4449
Critical Observation and Analysis into Wear Phenomena in Wc-
10%Co Drill Bits
Saurabh Dewangan
Technical Session-5
Theme- Design Engineering
Venue: 117C-1AB
Time: 11:00-01:00 PM
Session Chair: Dr TVVLN Rao
Session Co-chair: Dr Ramanpreet Singh
Sl. No. Paper Id Paper Title Author’s Name
1 DE3350
Modeling of partial slip texture design of slider and journal
bearing T. V. V. L. N. Rao
2 DE3311
Blend Recognition from CAD Mesh Models Using Pattern
Matching
Vaibhav J. Hase,Yogesh J.
Bhalerao Saurabh Verma G.
J. Vikhe
3 DE3316
Finite Element Analysis of Defect Interactions in Core/Shell
Quantum Dots
Nisarg Shetty, Arpit
Khandelwal, Dhaneshwar
Mishra
4 DE3324
Isogeometric FE Analysis of CNT Reinforced Composite Plates:
Free Vibration
Ashish K. Singh and A.
Bhar
5 DE3326
Fault Diagnosis of Single Point Cutting Tool Using Vibration
Signal by Rotation Forest Algorithm
Suhas S. Aralikatti,
Ravikumar K. N. and
Hemantha Kumar
6 DE3328
Investigation of Magnetorheological Brake with Rotor of
Combined Magnetic and Non-Magnetic Materials
Subash Ācharya, Hemantha
Kumar
7 DE3332
Hydrodynamic Analysis of a Low Head Prototype Francis
Turbine for Establishing an Optimum Operating Regime using
CFD
Gyanendra Tiwari Vishnu
Prasad, S. N. Shukla, Vivek
Kumar Patel
8 DE3333
Tribological Effectiveness of Viscosupplements for Osteo
Arthritis in Knee Joint D.Prekasan Dr.K.K.Saju
9 DE3343
Flashless Plastic Injection Molding using Rubber film and
Extruded Die Combination
Rajvardhan Nalawade
Chinmay Purohit and Nihar
Patwardhan
10 DE3317
Crack Propagation Studies in Saturated Poroelastic Media using
Finite Element Method
Arpit Khandelwal,
Dhaneshwar Mishra
Technical Session-6
Theme- Material Science/Nanotechnology
Venue: 117D-1AB
Time: 11:00-01:00 PM
Session Chair: Dr. Azri Alias
Session Co-chair: Dr Ravi Kumar Sharma
Sl. No. Paper Id Paper Title Author’s Name
1 MSE2218
A Review on Mechanical and Wear Characteristics of
Particulate Reinforced Al-alloy based MMC
Manish Prakash, Gaurav
Kumar Badhotiya and
Avanish Singh Chauhan
2 MSE2220
Vibration Damping and Corrosion Behavior Analysis of
Modified Alumina Coating over Aluminum Alloy using Spray
Coating Method
Dalip Singh, Sambhav Jain,
Shubham Sonewane, Veena
Dhayal, Dinesh Chandra
Agarwal
3 MSE2236
Study on Properties and Selection of Metal Matrix and
Reinforcement Material for Composites
Mukesh Kumar, R. K.
Gupta, Anand Pandey
4 MSE2237
Measurement of dispersion and homogeneity of functionalized
graphene/ CNT hybrid epoxy composite
Manoj Kumar Shukla,
Kamal Sharma
5 MSE2238
Process Parameter Optimization for Minimum
Polymerization Shrinkage of Resin Based Dental Material
Bhanu Pratap, R. K. Gupta,
S. S. Ghosh1 and Bhuvnesh
Bhardwaj
6 MSE2253
Magnetic Nano Composite Materials: A Review
Ayush Saxena and
S.S.Godara
7 MSE2256
Vibration Studies on Smart Hybrid Composite Beams
Basavaraj Noolvi, and
Shanmukha Nagaraj
8 MSE2257
Experimental investigation on tribological properties of PTFE
based Composite
P Santhosh Kumar , Madhu
Surya Vinayak ,V N
Vaishak , Y P Deepthi
9 MSE2218
A Review on Mechanical and Wear Characteristics of
Particulate Reinforced Al-alloy based MMC
Manish Prakash, Gaurav
Kumar Badhotiya and
Avanish Singh Chauhan
Technical Session-7
Theme- Manufacturing/Production
Venue: 118A-1AB
Time: 11:00-01:00 PM
Session Chair: Dr Anjaiah D
Session Co-chair: Dr Saurabh Dewangan
Sl. No. Paper Id Paper Title Author’s Name
1 PE4432
Multi Response Optimization of Process Parameters in
Abrasive Water Suspension Jet Machining of Glass Workpiece
Using Grey Relational Analysis
Anjaiah Devineni and
Deepak D
2 PE4428
Temperature distribution analysis and hardness measurement
into TIG welded stainless steel plates
Saurabh Dewangan, Meet
Rajendra Kumar Patel,
Rishikesh Singh, Abhishek
Kumar, Deepak Kumar
Gope, Uday Kumar
3 PE4436
Evaluating importance of Critical Success Factors in successful
implementation of Lean Six Sigma Framework
Vikas Swarnakar A. R.
Singhand Anil. Kr. Tiwari
4 PE4440
Effect of Reinforcements (B4C &Al2O3) and Rotational speed
on tribological properties of Aluminum alloy 7075 Hybrid
Composites through friction stir processing
Manu Khare, R. K. Gupta,
S. S. Ghosh and Bhuvnesh
Bhardwaj
5 PE4442
Study of Blind Hole Drilling in Inconel 718 Using Cryo-
Treated Cu Tool Electrode Assisted EDM
Rakesh kumar, Anand
Pandey and Pooja Sharma
6 PE4444
Recent Trends & Developments in Optimization and modelling
of Electro-discharge machining using Modern Techniques: A
Review
S M Towhidul Islam Nayim,
Muhammed Zahid Hasan,
Anbesh Jamwal, Dr. Sunil
Thakur, Sumit Gupta
7 PE4453
Regenerative Electromagnetic Shock Absorbers for
Independent Suspension System
Bhavya Bhatia and Anurag
Joshi
8 PE4454
Analysis of a Four-Wheeled Steering Mechanism for
Automobiles
Anurag Tirumala and
Anurag Joshi
Technical Session-8
Theme- Thermal and energy
Venue: 118D-1AB
Time: 2:00-4:00 PM
Session Chair: Dr Ram Dayal
Session Co-chair: Dr Manish Rawat
Sl. No. Paper Id Paper Title Author’s Name
1 THE1124
Conjugate Heat Transfer in an Annulus due to Partial Heating-
Part II
Azeem, H.M.T. Khaleed,
Maughal Ahmed Ali Baig
2 THE1125
Radiation Effect on Conjugate Heat Transfer in an Annulus
Maughal Ahmed Ali Baig,
N. Ameer Ahamad, Azeem,
Salman Ahmed N J
3 THE1126
Analysis of Engine Characteristics of a Variable Compression
Ratio Si Engine Fueled with Various Ethanol-Gasoline Blend
Sumit Taneja, Perminderjit
Singh, Ankit Parmar
4 THE1128
A review of control strategies for automotive evaporative
emissions practiced worldwide
Dharmesh Yadav, Rahul
Goyal and Vinod Singh
Yadav
5 THE1132 Numerical Investigation of Heat Transfer through a Square Heat
Exchanger with a Twisted Tape as a Heat Augmentation Device
Rahul Nanda, Akshith
Narayanan, Dr. Shiva
Kumar
6 THE1144
Data Acquisition System for Solar Electric Vehicles
Monik Garg, Vinayak
Gajendra Panchal, Sushma
S. Chandra and Ashish
Malik
7 THE1145
In-wheel Motor for Solar Electric Vehicles:
Challenges and Opportunities
Anupam Kumar, Kartikeya
Vishwakarma, Deepesh
Maram and
Ashish Malik
8 THE1146 Electric Vehicles for Agricultural Application in India –
A Short Review
Ashish Malik and Shivam
Kohli
Technical Session-9
Theme- Design Engineering
Venue: 117C-1AB
Time: 2:00-4:00 PM
Session Chair: Dr Daing Mohamad Nafiz Bin Daing Idris
Session Co-chair: Prof. S.S. Ghosh
S. No. Paper Id Paper Title Author’s Name
1 DE3312
A Review on Modal Characteristics of FGM Structures Rahul Singh, Pankaj Sharma
2 DE3314 Development of Clutch Operating Mechanism for Disabled
People
Deepak Goyal, Ravi Kumar
Gupta, Alain Bernard,
Akhilesh Kumar Sharma
3 DE3320
Evaluation of a Commercial MR Damper for Application in
Semi-active Suspension
Rangaraj Madhavrao Desai,
Mohibb E Hussain Jamadar,
Hemantha Kumar,
Sharnappa Joladarashi,
Rajasekaran S C Amarnath
G
4 DE3322
The Dynamic Stability Index Calculator for Agricultural
Tractors Equipped with Front End Loader
Pravin Arote, S Sudarsanam,
M Muthuraman and Prasad
Kharade
5 DE3323
Study of the Interaction of Residual Stress and Applied Loading
on Fracture Vinayak Ratan and A. M.
Shirahatti
6 DE3351 Post Buckling Response of Functionally Graded Graphene
Reinforced-Al Nanocomposite Plate
Ashish Kumar Srivastava,
Dhaneshwar Mishra
7 DE3362 Free Vibration Analysis of Thin Bimodular Laminated
Composite Beam Using Equivalent Stiffness
Nasir Hasan Sk, Amrendra
Kumar, Kallol Khan
8 DE3365 Fatigue Crack Prediction Around Non-Cold Worked Hole
Mohan Kumar S Ravi
Kumar V
9 DE3366 A Novel Approach for Calculation of Neutral Surface in
Bimodular Material Laminated Beam
Amrendra Kumar, Nasir
Hasan Sk, Kallol Khan
10 DE3310
Design and Development of a Structurally Stable
Quadruped Robot for Surveillance
Nakul Yadav, Tejasvi Raina,
Naman Guptaand Nikhil
Vivek Shrivas
Technical Session-10
Theme- Manufacturing/Production
Venue: 117D-1AB
Time: 2:00-4:00 PM
Session Chair: Dr Saiful Anwar Che Ghani
Session Co-chair: Dr Ashish Goyal
Sl. No. Paper Id Paper Title Author’s Name
1 PE4443
Use of Blockchain to Solve Select Issues of Indian Farmers
Vinay Surendra Yadav and
A. R. Singh
2 PE4444
Recent Trends & Developments in Optimization and modelling
of Electro-discharge machining using Modern Techniques: A
Review
S M Towhidul Islam Nayim,
Muhammed Zahid Hasan,
Anbesh Jamwal, Dr. Sunil
Thakur,Sumit Gupta
3 PE4450
Wettability of 3 D Printed Polylactic Acid (PLA) Parts
Ujjaval Modi and Shashi
Prakash
4 PE4451
Some Analysis into 0.18%-C Steel Work Piece
Undergone Through Turning Operation by using HSS
[Kt-8 (M42)] Single Point Tool
Saurabh Dewangan,
Ashutosh Pattnayak, R
Abhisek, Niranjan Patel
5 PE4457
An Ant Colony and Nearest Neighborhood Approach to
solve an Excess Capacity Vehicle routing problem in a
FMCG Company
Prakash Marimuthu K,
Srinivas Rao T
6 PE4465 Dimensional study of FDM developed hip implant PLA
parts
Tarun Sai Nagubandi,
Pranav Juneja, Ubaid
Afzal, Jayesh Jaisinghani,
Vimal Kumar Pathak
7 PE4467
State of the Art in Hard Turning of Nickel Based Supper Alloys
Sameer Malhotra, Suyash
Arora, Mithilesh Dikshit
8 PE4468
Development of Optimized solution for a Generic Disaster
Management Problem through Construction of Responsive
Supply Chain: A Review
Divya Sharma SG and
Srinivas Rao T