march 2016 issue

M A C H I N E R Y

MARCH 2016Volume 31 Number 3Phone: 905-528-7765Fax: 905-917-0222

www.cluemachines.comemail: [email protected]

WF 13R � oor type with Ram AND Spindle

The rising force in boring mills

WF 13R � oor type with Ram AND Spindle

WFT 13R table type with Ram AND SpindleWFT 13R table type with Ram AND Spindle

Phone: 905-876-0890 | www.tosamerica.com | 7055 Auburn Road, Milton, ON L9T 7V9

TOS America V7.indd 1 1/27/2014 2:09 PM

Clue March, 2016

Horizontal Lathes “NEW” 20˝x 60˝ manual lathe, 10˝ 3

jaw chuck, 14˝ 4 jaw chuck, 4˝ spindle bore, splash guard, steady rest, stock 4039

“NEW” 20˝x 80˝ manual lathe, 10˝ 3 jaw chuck, 14˝ 4 jaw chuck, 4˝ spindle bore, splash guard, steady rest, stock 4037

MAZAK Slant Turn 40N-ATC Millcenter 1000, Fanuc Control

RD&D 64˝x 170˝, sliding bed type gap lathe, 16˝ hole through spindle, GN10 CNC control, Stock No. 3849

SAFOP 63˝x 236˝, C axis, live tooling on programmable turret, Siemens 840D CNC control, Stock No. 3791

HITACHI 29˝ swing, Turret Lathe, 6.25˝ hole through, Stock No. 3183

MORI SEIKI 27˝x 35˝, Model SL6, Fanuc 6T, 1981, equipped with tailstock, 12 station turret, Stock No. 4173

AWOH+AMUKO 11˝x 13˝ CNC Lathe, Model HJ-28, 18” swing, Fanuc 21iTB Control, 8 position turret, 2004. 2 Available. Stock 4156 & 4157

SMTCL HTC2050, 8˝x 20˝, CNC turning center, FANUC control, tailstock, low hours, like new, 2010.

DMG CTX-410, 2008, 365mm turning diameter, 505mm swing, 66mm bar diameter, 1700 hours.

Vertical Lathes BERTHIEZ 62˝ table, 75˝ swing, Model

TVM 125, 1997, Fanuc 15T, 95kw main spindle, Live tooling, tool and part probes, very heavy duty, Stock No. 4079

SCHIESS 40˝ table, 55˝ swing, Model 14DKE100, updated electrics, fresh paint, Stock No. 4071

BULLARD Man-Au-Trol, 42˝ table, equipped with side head, from an aerospace facility, gently used, Stock No. 4205

OKUMA+HOWA ACT 2SP-V3, 10˝ chucks, twin spindle, Fanuc 0TT, 12 position turrets, 30HP spindles, Stock No. 4219

Cylindrical Grinders SCHAUDT 13˝x 27˝, Universal Heavy

Duty, Stock No. 3826

B&S 10˝x 48˝, Brown & Sharp, Model 1048 Microstatic, Stock No. 3825

Milling Machines HECKERT 16˝x 63˝, Model No. FSS 440

V1/2, Heavy Duty, Universal, Stock No. 3686

Horizontal Boring Mills TOS WD130, 130mm spindle,

Floor type boring mill, FAGOR 8055 CNC, 232˝x 97˝ travel, 90˝x 84˝ G&L table, linear scales, under power, Stock No. 4353

TOS W100A, 1988, FAGOR DRO, tailstock

SCHARMANN 125mm spindle, Model Ecocut, Siemens 880 Ctrl, 3000 RPM, 50 HP spindle, built in CNC Facing head, 2 pallets, 50˝x 63˝

SUMMIT 130mm Spindle, New in 1989, 79˝x 72˝ table, good travels, facing head, pendant controls, good condition.

Surface & Blanchard Grinders

ARTER Rotary Surface, Horizontal Spindle, Stock No. 3827

SHIBAURA 48˝, Model No. KRT-8D, Blanchard Style, Stock No. 3684

Machining Centres TOS 12˝x 51˝, Model FV 25, FAGOR

CNC control, box ways, priced to sell, Stock No. 3710

LEADWELL 20˝x 30˝, Model MCV-760XL, FANUC 0 CNC Control, 20 position ATC, Stock No. 3453

BRIDGEPORT 20˝x 40˝ CNC VMC, Model VMC1000/22, 6000 RPM, 40 taper, 1998, Stock 4159

BOSTOMATIC 32G Graphite VMC, 42K spindle, 4th axis.

Miscellaneous IEMCA Bar feeder, 2.55˝ bar capacity,

3600mm bar length, Stock No. 4066

DANDREA CNC facing head

DO-ALL Horizontal Bandsaw, Model C-916A, Stock No. 3466

AMADA Punch Grinder, Stock No. 3463; Granite Table, 150˝x 150˝, Massive!, Stock No. 3418

ARCHDALE Radial Drill, Stock No. 4211

PRATT & WHITNEY Jig Grinder, Model No 20, Pratt and Whitney rotary table, from an aerospace facility, gently used, Stock No. 4215

AMERICAN Radial drill, 5´ arm, 17˝ column, 5MT spindle taper, power quill travel, Stock No. 4237

PFAUTER Gear hobber, Model P900 Turbo, 36˝ max workpiece diameter, 2.5 max DP, 24˝ axial travel, max hob 7-3/8˝ dia x 9˝ long, Auto hob shift, swing away tailstock, change gears, Stock No. 4253

FLOOR PLATES Various sizes

Toronto Office: 905-676-9265 USA Office: 412-421-1211www.dipaolocnc.com [email protected]

NEW & USED MACHINERY

OTHER SERVICESOn-Site spindle taper grinding

Machine tool calibration and metrology

Mechanical, Electrical and CNC field service

Installations and plant moves

Spare parts including exchange programs

Authorized distributor for Heidenhain,Fagor, Fanuc FA, Siemens and Renishaw.

Certified Appraiser on staff

Way Grinding

Gantries andVertical Boring Mills

Cylindrical, Surface, Rotary, and Vertical

Grinders

CNC Milling Machines and Machining Centers

Universal 5 Axis Milling Machines

Heavy DutyCNC Lathes

Horizontal Boring Mills, Milling Machines,

Machining Centers

Double Column Vertical

Machining Centers

LGB Model R5030, Hydraulic surface grinder, 11.8” x 23.6” magnetic chuck, 1997, Stock 4598.

KASTO Horizontal bandsaw, Model SBA-220 AU, 1985, Stock No. 4567

TRANSFORMERS Various sizes and voltages

LEVELING SHOES Various sizes available

CNC CONTROLS motors, and drives, various

Clue March, 2016

CLUE, March 2016

63 Maplecrete Road, Concord, Ontario, L4K 1A5 Canada

Tel: (905) 669-7507 ! Fax: (905) 669-7512e-mail: [email protected] ! web: www.tradermachinery.com

AIR COMPRESSORS5hp CAMERON, Piston type

BENDERS, HYDRAULIC5-1/2" ENERPAC, Hyd. Pipe bender, w/assisted tooling

BORING MILLS, VERT63"sw TOSHIBA, TMC-13(3), CNC, C-axis w/ Fanuc 32i

BRAKES, PRESS30 to 3000 Ton “NEW” ACCURPRESS Models CNC35 Ton x 6’ ALLSTEEL, No. 35-6, Manual BG45 Ton x 4’ “NEW” ACCURPRESS, S4504, CNC, Y, X, R, Crowning, Laser safety50 Ton x 4’ “NEW” ACCURPRESS, SH5004, Hybrid, CNC Touch screen55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis60 Ton x 8’ ACCURPRESS, 7608, 2-Axis CNC, Light curtains60 Ton x 8’ ACCURPRESS, No.7608, Autogauge G24 Backgauge, ETS100 Ram65 Ton x 6’ ALLSTEEL, No. 6508 (2001), Automec single axis, BG70 Ton x 10’ ALLSTEEL, Hyd.75 Ton x 10’ “NEW” ACCURPRESS, CNC110 Ton x 10’ AMADA, RG100 (1998), NC-9EXII Ctrl, Safety lights120 Ton x 8’ ALLSTEEL, CNC, Single-Axis Gauge130 Ton x 10’ “NEW” ACCURPRESS, CNC200 Ton x 12’ “NEW” ACCURPRESS, CNC250 Ton x 12’ “NEW” ACCURPRESS, CNC750 Ton x 16’ CHICAGO, Hyd. CNC Automec 2-Axis, Safety lights, Guarding

DRILLS, COLUMN & BENCH1-3/8"cap “NEW” DRILLMASTER, Z5035, Geared Head

DRILLS, RADIAL3’ arm “NEW” TONE FAN, RD-9003’ Arm SUNLIKE, 1500rpm, w/work table4’ Arm DARBERT, TF-1100 (2003)9’arm SHENYANG, Box table

EDM, WIRE NC/CNCX-23.6" Y-15.7" Z-16.5" MITSUBISHI, MV-2400-ST (2013), CNC Wire EDM

GRINDERS, CYLINDRICAL12"x 40" KIKINDA, w/I.D. Grinding

GRINDERS, SURFACE, RECIPROC6" x 18" “NEW” KENT, KGS-2006"x 18" FORWARD, Manual8"x 18" FREJOTH, Automatic, Hyd.10"x 20" ACER, 3-Axis, Fully Auto, Hyd. Coolant12"x 24" OKAMOTO (2007), CNC, Fanuc 21MB12"x 24" CHEVALIER, FSG-1224AD

HONESSUNNEN, MBC-1804M & MBC-1802MR, Power Stroke, Horiz.SUNNEN, MBB-1660K, ManualSUNNEN, MBB-1650, Manual, Asst’d Tooling & Cabinet

PRESSES, INSERTION4 Ton HAEGER, w/Stand8 Ton PEMSERTER, Series 2000 (2002), PLC control

IRONWORKERS55 Ton “NEW” MAKO, Universal, 5"x 5"x 3/8" angle

LASERS2000 Watt - 33 Ton AMADA, ApelioIII, 375V, Hyd Punch/Laser Machine3000 Watt BYSTRONIC, Bystar 2512 (2002), 4’ x 10’5000 Watt TRUMPF, L3050 (2005), 5’ x 10’

LATHES, ENGINE12" x 40" “NEW” MORTON, F1900-AEG (2001), Single Phase13"x 40" SHUN CHUAN (2004), 2-Axis DRO, steady/follow rest14"x 40" JIMT, JIMT360, Toolroom, 10" chk18" x 60" “NEW” POWERTURN, 46063"X 106" BOKO, D82H, Semi-Automatic Spinning lathe

LATHES, N/C & CNCDMG, CTX 410 (2008), Live tool, Fanuc 32, Excellent!OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw, 2" Bar capMORI SEIKI, SL150S (1997)MORI SEIKI, NL2500/700 (2006), MSX850 Control, 10"Chk, live holders, C&Y Mill capHAAS, SL-20 (2005), Live ToolROMI, M17 (2007), 17"x 43", Fanuc 21i, 8"ChkTOOLMEX, TUR560MN-2000 (2012), 22"x 78.7", Siemens 840D, 16" Chk.TOOLMEX, TUR630AMN-3000 (2008), 24.8"x 118", Siemens 840D, 16” Chk.

HYUNDAI, L300 LA (2013), 29.5"SW, 52" Mach. Length, Fanuc Oi-TD, High Accuracy, HighProduction, 12"Chk

MACHINING CTRS, HORZOKUMA, MX-60HB (1997), X-39.37" Y-31.5" Z-31.8", OSP7000

MACHINING CTRS, VERTHAAS, VF1 (2005), X-20" Y-16" Z-20", 15,000 rpmFADAL, VMC40, X-22" Y-16" Z-20", CNC 88 CtrlHAAS, VF-2SS (2011), X-30" Y-16" Z-20", 12,000rpmMIKRON, HSM-600U (2006), X-31.4" Y-23.6" Z-19.7", 5-Axis high speedMAKINO, S56 (2007), X-35.4" Y-19.7" Z-17.7", Professional 5 CNC, 13,000 rpmMILLTRONICS, RH20 (2000), X-40" Y-20" Z-24", Centurion 6 controlOKK, MCV-560 (2001), X-41.3" Y-22.04" Z-22.04", Fanuc 16iM, CTS, 50 tap.HURCO (2013), 5-Axis, X-42" Y-24" Z-24"HAAS, VF-5 (2013), X-50" Y-26" Z-32", 50 TaperDAHLIH, MCV-1500 (1996), X-59" Y-24" Z-27", 3500rpmDAHLIH, MCV-1700, X-67" Y-33" Z-29", 3500/6000rpm, 1997/2001

MILLS, VERTICAL9"x 42/48" BRIDGEPORT, w/Fagor DRO9"x 42" FIRST, LC 1-1/2 VS (2011), 2-Axis Heidenhain DRO9" x 49" "NEW" MAGNUM-CUT, VM-2V, 3hp9"x 49" EXCELLO, 60210"x 50" TOPWELL, No.5VK, 2-Axis Anilam DRO, Power Drawbar10" x 54" "NEW" MAGNUM-CUT, VM-4V, 40 Taper, 5hp12"x 51" TOS, FNK2 (1999), DRO, P/F, V/S

MILLS, VERTICAL, CNC9"x 49" BRIDGEPORT, Acu-Rite MillPower 3-Axis CNC, R8 Taper10"x 50" SOUTHWESTERN INDUSTRIES, TRAK K3 (2002)

NOTCHING MACHINES9"x 9"x 1/8" STRIPPIT, Hyd.

PLASMA CUTTING MACHINES100 Amp MESSER MG (2000), 6’x 10’, Hy-Definition, CNC plasma, Metalmaster II

PRESSES, OBI40 Ton BROWN BOGGS, Air Assist Clutch80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x 36"bed

PUNCHES, SINGLE STATION60 Ton FABMASTER (2011), Like new

PUNCHES, TURRET16.5 Ton WIEDEMANN, Centrum 1000Q, w/Tooling, Fanuc OP22 Ton STRIPPIT, 1250/H20 (1998), 197" x 50" Max. sheet size25 Ton TRUMPF, TC500/1300, 50"x 100"33 Ton AMADA, 357 Queen (1998)33 Ton AMADA, Vipros 358 King II, 58 Stn, Fanuc 18P33 Ton AMADA, EMK 3610NT (2007)50 Ton WIEDEMANN, Vectrum 5000, 72"x 60", 60" Throat, 54 Stn, tooling

ROLLS, ANGLE BENDING2"x 2"x 3/16" "NEW" (Demo) TAURING, SAF DS 50HV, Hydraulic2.2"x 2.2"x 1/4" TAURING, SAF DS 60 HV6"x 6"x 1/2" PULLMAX, Z43, Hydraulic, Pendant Control, Digital Readout

ROLLS, PLATE BENDING1.575"x 10" MG, Hyd, 4-Roll1"x 10’ PULLMAX, PV7H, Hyd., 3-Roll Double Pinch

SAWS, BAND, HORIZONTAL9"x 16" DOALL, Semi-Auto10"x 15" "NEW" ACRA, Speeder FHBS-250V12"x 14" RAM, Semi-Auto

SAWS, BAND, VERTICAL9"x 16" DOALL, C916, Horizontal, Semi-Automatic10"x 13" BAXTER, No.115B, Roll-In-Saw12"x 14" RAM, Vertical Roll-In Saw

SHEARS, POWER SQUARING10ga x 4’ ALLSTEEL, Hyd, FOPBG1/4"x 10’ "NEW" ACCURSHEAR, No.6250103/8"x 8’ ACCURSHEAR (1998), Hydraulic

MISCELLANEOUSBarfeeder SPACESAVER, 4’ SMW, Autoload 12.65Barfeeds LNS, Servo S3, (2007 & 2013) w/Remote pendantGundrill 3/4" x 30", ELDORADO, M75-1041Spot Welder 20 KVA, SIPSanding/Deburring Machine 37"MIDWEST (2014), w/ Dust CollectorWire Machinery "NEW" METALEX, WT250, Wire Nibbler

NEW

Clue March, 2016

WE BUY SINGLE MACHINES OR COMPLETE PLANTS

63 Maplecrete Rd.Concord, Ontario L4K 1A5Tel: (905) 669-7507Fax: (905) 669-7512www.tradermachinery.com

HAAS, VF-1D, 2005, 20”X, 16”Y, 20”Z,Vert. Mach. Center, 15,000 rpm

HAAS, SL-20T, 2005, CNC Turning Center,8” 3-jaw chk, 5C Collet chk.

NEW Accupress CNC Hydraulic Press Brakesavailable from stock

TRUMPF, 5000 Watt, 5’ x 10’, 2005,Siemens 840D Control

16.5 Ton, WIEDEMANN, CNC Turret Punch,No Centrum 1000Q

10” x 50”,SOUTHWESTERN INDUSTRIESTRAK K3, 2-Axis, CNC Milling Machine

Clue March, 2016

Clue March, 2016

www.havlikgear.com

Introducing the FUT - TOS new generation

Leaders in gear manufacturing since 1886

Exclusive dealer for TOS Kurim

Havlik Gear (Head Office)455 Sheldon Dr., Cambridge, ON N1T 2B7, CanadaTel: (519) 624-6240 Fax: (519) [email protected]

FUT - TOS new generation

The machine is intended for machining of complex shaped work pieces by adopting the conventional technology and high speed cutting. Independent longitudinal and cross beds with a T-shape layout are the base of the machine. A longitudinal slide with a rotary, adjustable table travels along the longitudinal bed in the direction of the “X” axis. Column moves in the cross direction of the “Z” axis.The headstock moves on the guide surfaces of the column in the vertical direction of the “Y” axis.

MAIN MACHINE FEATURES• cutting-edge composite bed and column solution based

onaweldmentfilledwithaspecialconcretemix• considerable higher rigidity than in conventional struc-

tures• spindle with high torque and speed up to 6 000 rpm• high versatility of automatically interchangeable milling

heads• rapid feed rate 30 m/min• HSCmachiningfromfivesides• up to 6 contouring axis• versatile design and application • thermal stabilization of headstock and heads• long service life, accuracy and reliable operation

The FUT machine axis design goes beyond the industry and reached into the segment of horizontal boring machines where it stands out against other current manufacturers asitofferstopparametersregardingdynamicsandrigid-ity. This ensures higher labour productivity and accuracy of machined parts. The composite solution increasesdampening during machining processes, leading to longer service live of machines and the entire machinery.

Clue March, 2016

Page 8 / Steel Marketplace / JULY 2007

�

• APPRAISALS • FINANCING • • TRADE-INS • TOOLING •

• SHIPPING • INSTALLATIONS • • TRAINING • SOFTWARE •

VISIT US AT:www.jordancraigmachinery.com

TO VIEW A COMPLETE LIST

Check out our website for Photos, Specifications and a more complete inventory atwww. jordancraigmachinery.com

JORDAN CRAIG MACHINERY INT’L LLC, P.O Box 737, New City, NY 10956Tel: 845-398-0073 [email protected]: 845-398-0074 www.jordancraigmachinery.com

4000 WATT AMADA FOMII 3015NT LASER MFG:2012, STOCK #10395

257 TON, TRUMPF TRUMABEND V230, BRAKE PRESS, DELEM DA69 6-AXIS, CLAMPING,

CROWNING, ACB. MFG:2000 STOCK #10403

33 TON, AMADA, EMK3610NT AMNC-F,TURRET PUNCH, 60” X 100”,MFG:2007, STOCK #10361

AMADA,GEMINI FO-3015NT, 4,000 WATT, LASER, 5’X10’, APPROX HRS: 45,000

MFG:2005, STOCK #10402

22 TON, STRIPPIT, V20 1525 FANUC 180I,TURRET PUNCH, 60” X 80”, 34 STATION,

4 A/I, MFG:2011, STOCK #10413

88 TON, AMADA, RG-8024LD, BRAKE PRESS, 2-AXIS CNC, MFG:1999 STOCK #10425

AMADA 6KW LC-3015F1NT, LASER,5’ X 10’ DUAL PALLET

MFG: 2011, STOCK #10114

33 TON, AMADA, VIPROS 358 KINGII, TURRET PUNCH, FANUC 18P, 4 A/I.MP1225NJ LOAD/

UNLOAD, MFG:1999, STOCK #10383

33 TON, AMADA, PEGA 357, TURRET PUNCH, FANUC 04PC, 58STA., 2 A/I,MFG: 1994, STOCK #10382

AMADA FO MII RI 3015, 4000 WATT, LASER,5’ X 10’ ROTARY INDEX,

MFG:2012, STOCK #10320

143 TON, AMADA, HDS-1303NT, BRAKE PRESS, AMNC-PC 8-AXIS,

MFG:2006 STOCK #10426

22 TON TRUMPF, TC2020R BOSCH,TURRET PUNCH, 50” X 100”, MFG:2010

APPROX. 2800 HRS. STOCK #10411

Clue March, 2016

BARON-MAX MACHINING CENTRE BARON-MAX CNC TEACH-IN LATHE

MAXIMART BEDMILL

DRILLMASTER RADIAL DRILL

“SPECIAL PRICES”HEAVY DUTY LATHES

Special Pricing - Large InventoryAll New Milling Machines - Lathes & Surface Grinders

NEW MACHINES“From Stock”

S1600 - 5’3” ArmTF1280H - 50“ ArmTF1100 - 44” ArmTF900 - 36” ArmTF 750 - 30” ArmMXB5 - 47”x 23”x 24” Travel

7-1/2HP Inverter HeadManual or with Fagor 3-Axis CNC

26” x 120” x 4” Bore - 16” Wide Bed20” x 80” x 4” BoreAlso in Stock: 14“, 16”, 18”, 20“ & 22” Swing

42” x 24” x 24” Fagor Control32” x 20” x 20”

28” x 60” - 4” Bore, also 18” x 40”with Fagor CNC Control

POWERMASTER MACHINERY LTD.1048 Matheson Blvd. E. Mississauga, ON L4W 2V2

Tel: 905-624-9327 Fax: 905-624-8591e-mail: [email protected] website: www.powermaster.ca

OVER 30LATHES

IN STOCK

OVER 40MILLS

IN STOCK

2VS - 9”x49“ - R83VS - 10”x50“ - R84VS - 10”x54” - ISA40

Clue March, 2016

All Auctions Are Live Onsite & Online Via

UPCOMING AUCTIONS!

A U C T I O N S • L I Q U I D AT I O N S

F I N A N C I N G • A P P R A I S A L S

9 0 5 . 6 6 9 . 8 8 9 3i n f i n i t y a s s e t s . c o m

Like us at: facebook.com/Infinity-Asset-Solutions-Inc

Follow us at: twitter.com/InfinityAssets

SPECK-TECH SYSTEMS INC.Manufacturer of Automated Packaging Lines CNC Machine Shop & Inventory

40 Cardico Drive, Gormley (Toronto), Ontario, Canada

AUCTION: Tuesday March 15, 11am (ET) Inspection: Mon March 14, 9 AM to 4 PM

Featuring: MAZAK CNC Lathe model SQT 250 MSY – Live Tooling & Sub Spindle (1 of 2 CNC Lathes), MAZAK CNC VMC model VTC-20B (1 of 3 CNC VMC’s),

PEARSON 10’ x 80 Ton Hyd. Press Brake, KINGSLAND 60 Ton Ironworker, Plus Shear, Turret Punch, Lathe, Broach, VTL, Power Rolls, Saws, and Huge Quantity of

Stainless Steel Materials, Components and Stores.

DI-CUT INDUSTRIES LTD.Sale Held In Conjunction With North East Printing Machinery Inc.

Di Cutters, Folder Gluers, Polar Paper Cutter Line, Sheet Folders, Etc. 1401 Huntingwood Dr, Toronto, Ontario

AUCTION: Thursday March 17, 10:30am (ET) Inspection:Wed March 16, 9 AM to 4 PM

Featuring: 1999 BOBST Flatbed Die Cutter Model Autoplaten SP102-E-II (1 of 7 Die Cutters), 1996 BOBST Folder Gluer Model Domino 90-A1 (1 of 4 Folder Gluers), Complete2000 POLAR Cutting Line with 45” Guillotine, 2005 PACK SMART Fulfillment / Mail Table

line, Complete 2010 BUSKRO Inkjet Printing System, Cutter Plotters, Packaging etc.

2

1

ACAN WINDOWS AND DOORSOne Of The Largest Suppliers Of Vinyl Windows Patio And Entrance Doors In Canada

1641 Topsail Road, Paradise, Newfoundland, Canada

AUCTION: Wednesday April 6, 12pm (NDT) Inspection:Tues April 5, 9 AM to 4 PM

Featuring: 2011 ERDMAN Automated Insulated Glass Line, 72”x72” Capacity - $1M Replacement Cost, 8 URBAN CNC Vinyl Welders, Up to 4 Corner, As New As 2009,

2013 UNITED Drive Through Spray Booth, 2010 VEGA CNC Automated Door Line, 36” x 96”Capacity, Plus: CNC Glass Cutting Line, Screen Machines, (12) CNC Profile Cutting

Machines As New As 2013, Material Handling, Heat Treat & More. REAL ESTATE AVAILABLE FOR SALE OR LEASE

3BARON-MAX MACHINING CENTRE BARON-MAX CNC TEACH-IN LATHE

MAXIMART BEDMILL

DRILLMASTER RADIAL DRILL

“SPECIAL PRICES”HEAVY DUTY LATHES

Special Pricing - Large InventoryAll New Milling Machines - Lathes & Surface Grinders

NEW MACHINES“From Stock”

S1600 - 5’3” ArmTF1280H - 50“ ArmTF1100 - 44” ArmTF900 - 36” ArmTF 750 - 30” ArmMXB5 - 47”x 23”x 24” Travel

7-1/2HP Inverter HeadManual or with Fagor 3-Axis CNC

26” x 120” x 4” Bore - 16” Wide Bed20” x 80” x 4” BoreAlso in Stock: 14“, 16”, 18”, 20“ & 22” Swing

42” x 24” x 24” Fagor Control32” x 20” x 20”

28” x 60” - 4” Bore, also 18” x 40”with Fagor CNC Control

POWERMASTER MACHINERY LTD.1048 Matheson Blvd. E. Mississauga, ON L4W 2V2

Tel: 905-624-9327 Fax: 905-624-8591e-mail: [email protected] website: www.powermaster.ca

OVER 30LATHES

IN STOCK

OVER 40MILLS

IN STOCK

2VS - 9”x49“ - R83VS - 10”x50“ - R84VS - 10”x54” - ISA40

Clue March, 2016

B1804 BENDERS, HYDRAULIC

5-1/2" ENERPAC, , Hyd. Pipe bender, w/assisted tooling,

(Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

B5500 BORING MILLS, HORZ, TABLE

TOS, W-100A (1987), Excellent Condition, $64,500, (Machinerie

Gilles Lupien Tel: 819-478-5266, Fax: 819-478-5266)

B6985 BRAKES, HAND

16ga X 10’ BROWN & BOGGS, , $3,000, (Machine Solutions

Inc. Tel: 416-220-5910 See Page 2

B7000 BRAKES, PRESS

15 Ton x 4’ CHICAGO, , Mechanical, $1,900, (Machine

Solutions Inc. Tel: 416-220-5910 See Page 2

20 Ton x 4’ ALLSTEEL, , Hydraulic, $5,500, (Machine Solutions

Inc. Tel: 416-220-5910 See Page 2

35 Ton x 6’ ALLSTEEL, No. 35-6, Manual BG, (Trader

Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)

See Page 4

35 Ton x 6’ TRI-ACRO, 35-6 (1993), Hydra-Mechanical, Hurco

5C, Ref# 10204, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

45 Ton x 4’ “NEW” ACCURPRESS, S4504, CNC, Y, X, R,

Crowning, Laser safety, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

55 Ton AMADA, FBDIII5020NT (2000), “Up-Acting” 7-Axis NT

Control, Ref# 10355, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

55 Ton AMADA, RG50 (1999), Hurco Autobend 7, 2-Axis, Ref#

10354, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 7

55 Ton AMADA, FBD5020 (1989), NC9EXII 3-Axis CNC, 78.74"

O.A., Ref# 10391, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

55 Ton TRUMPF, V50 (2001), Prog. Z1,Z2, Clamping, Ref#


Fax: 845-398-0074) See Page 7

55 Ton x 6’ PACIFIC, Hurco CNC, Single-axis, (Trader


See Page 4

60 Ton x 6’ CINCINNATI, 60CBII4 (1997), 2-axis CNC Back

Gauge (Upgrade), Ref# 10370, (Jordan Craig Machinery Int’l

Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

60 Ton x 8’ ACCURPRESS, 7608, 2-Axis CNC, Light curtains,


Fax: 905-669-7512) See Page 4

60 Ton x 8’ ACCURPRESS, No.7608, Autogauge G24

Backgauge, ETS100 Ram, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

65 Ton x 6’ ALLSTEEL, No. 6508 (2001), Automec single axis,

BG, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

70 Ton x 10’ ALLSTEEL, , Hyd., (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

72 Ton TRUMPF, Trubend 3066 (2008), 4-Axis, 2700 Hours,

Ref# 10286, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

75 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader Machinery


88 Ton AMADA, FBDIII8025NT (2001), AMNC-PC, Ref# 10340,

(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 7

88 Ton AMADA, RG80 (2000), NC 9EXII 3-axis, Ref# 10033,


Fax: 845-398-0074) See Page 7

88 Ton AMADA, Astro 100M (2001), FBDIII-8025, Sold NEW in

2004, Ref# 10192, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

88 Ton AMADA, RG80S (1985), NC9EX 3-axis Back Gauge,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

88 Ton AMADA, RG M2 8024 (2012), Ref# 10396, (Jordan

Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 7

88 Ton AMADA, RG-8024LD (1999), 2-Axis CNC, Ref# 10425,


Fax: 845-398-0074) See Page 7

88 Ton x 98.6" AMADA, FBD 8025F (1992), “Up-Acting”, NC9F

Control, Ref# 10356, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

90 Ton CINCINNATI, 90AFX10 (2000), AutoForm 6-Axis,

Crowning, 12’ O.A., Ref# 10392, (Jordan Craig Machinery

Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

93.5 Ton TRUMPF, Trubend 5085 (2011), 6-Axis BG, Ref#


Fax: 845-398-0074) See Page 7

95 Ton TRUMPF, V85 (1997), Delem Prog. Z1 & Z2, Ref#


Fax: 845-398-0074) See Page 7

100 Ton TOYOKOKI, HYB 1003 (1998), 10’ O.A.,5-Axis,

European Style Tooling, Ref# 10405, (Jordan Craig

Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)

See Page 7

110 Ton AMADA, Astro 100NT (2004), HDS1030, Robotic

bending cell, Ref# 10203, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

110 Ton x 8’-6’ “NEW” FERRIC, , Ferric PB Pro Falcon

2600x100, XR Back gauge, CNC crown, 2D graphic, (Ferric


See Page 20

110 Ton x 10’ AMADA, RG100 (1998), NC-9EXII Ctrl, Safety

lights, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

110 Ton x 13.5’ GASPARINI, EFB 4100x105, XR Backgauge,

CNC Crown, DNC angel prog., (used), (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 20

120 Ton ACCURPRESS, Edge 412012 (2015), 6-Axis Vision

CNC, Ref# 10415, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

120 Ton ACCURPRESS, Edge 412012 (2015), 6-Axis Vision

CNC, Ref# 10415, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

120 Ton x 12’ ALLSTEEL, , Hurco CNC, $18,000, (Machine


130 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader


See Page 4

137 Ton AMADA, HFB1254/5, NEW 1995, Operateur CNC,

165", Ref# 10214, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

138 Ton AMADA, FBD1253NT (1999), Up-Acting CNC, Ref#


Fax: 845-398-0074) See Page 7

138 Ton AMADA, FBD1253NT (2003), Up-Acting CNC, Ref#


Fax: 845-398-0074) See Page 7

143 Ton AMADA, HDS-1303NT (2006), AMNC-PC 8-Axis, Ref#


Fax: 845-398-0074) See Page 7

144 Ton TRUMPF, V130 (1997), Delem Prog. Z1 & Z2, Ref#


Fax: 845-398-0074) See Page 7

150 Ton x 10’ “NEW” FERRIC, Speed Bend Pro, 3100x135,

XRZ1Z2 back gaug, CNC crown, 2-3D prog. off line software,

(Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 20

165 Ton x 12’ HACO, ERM 36150, 6 axes CNC BG, CNC,

Crown, AKAS Laser BC59, 2D Graphic (used), (Ferric


See Page 20

165 Ton x 12’ HACO, ERM 36150, CNC backgauge, ATS560

ctrl & tooling (used), (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 20

170 Ton x 12’ VERSON, , Mechanical, (Machine Solutions Inc.

Tel: 416-220-5910 See Page 2

175 Ton x 12’ ACCURPRESS, Advantage 717512 (2004),

ETS3000 3-Axis, Ref# 10273, (Jordan Craig Machinery Int’l


175 Ton x 12’ “NEW” TOSKAR, , CNC 4-axis Touch graphic

Manual crown tooling, quick release clamping, (Machine


193 Ton x 10’ “NEW” FERRIC, , PB Pro Falcon 3100x175, XR

Back gauge, CNC crown, 2D graphic, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 20



Tel: 877-337-7424, Fax: 905-820-3234) See Page 20



See Page 4

220 Ton x 13’ FISHER, , XR BG, CNC Crown Cybelec DNC900

control, (used), (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 20

PAGE 16 CLUE, February, 2016

CLASSIFIED - LISTING YOUR MACHINERY AND EQUIPMENT TODAY

LEADS TO SUCCESSFUL SALES TOMORROW

Don't Delay! Phone: (905) 528-7765 Fax: (905) 917-0222

Clue March, 2016

CLUE, April 2014 PAGE 17

B7000 BRAKES, PRESS I6200 IRONWORKERS



Tel: 877-337-7424, Fax: 905-820-3234) See Page 20

242 Ton x 12’ “NEW” FERRIC, SB Pro 3760x220, XRZ1Z2

backgauge, CNC crown, ER90 Plus 2D-3D offline incl.,


Fax: 905-820-3234) See Page 20



See Page 4

257 Ton TRUMPF, Trumabend V230 (2000), Delem DA69

6-Axis, Clamping, Crowning, ACB, Ref# 10403, (Jordan Craig


See Page 7


Back Gauge, CNC Crown, 2D graphic, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 20

40-400 Ton x 5-16’ “NEW” TOSKAR, , Hydraulic, (Machine


400 Ton x 17’ CINCINNATI, , Mechanical, (Machine Solutions

Inc. Tel: 416-220-5910 See Page 2

600 Ton x 16’ ALLSTEEL, , Hydraulic, $27,000, (Machine


750 Ton x 16’ CHICAGO, , Hyd. CNC Automec 2-Axis, Safety

lights, Guarding, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

1750 Ton PACIFIC, Fabri-K 1750-40/36 (2007), Cybelec 8805,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

D0654 DEBURRING MACHINES

37" MIDWEST, (2014), w/ Dust Collector, Sanding/Deburring

Machine, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

D5700 DRILLS, RADIAL

3’ Arm SUNLIKE, , 1500rpm, w/work table, (Trader Machinery


5" BERGONZI, TM50/1600, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

E2400 ELECTRIC DISCHARGE MACHINES

50 AMP RACER, BR400ENC, 40"x 22" Tank, (Powermaster

Machinery Ltd Tel: 905-624-9327, Fax: 905-624-8591)

See Page 8

F5006 FURNACES

Heat Treating , New & Reconditioned, Powered by Electric,

Gas, Oil, Propane, for all purposes, (Park Thermal

International Tel: 905-877-5254, Fax: 905-877-6205)

G4706 GRINDERS, CYLINDRICAL

12"x 40" KIKINDA, , w/I.D. Grinding, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

G8025 GRINDERS, SURFACE, RECIPROC

6"x 18" FORWARD, , Manual, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

8"x 18" FREJOTH, , Automatic, Hyd., (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

8"x 20" JONES & SHIPMAN, , $1,900, (Machine Solutions Inc.

Tel: 416-220-5910 See Page 2

8"x 24" TOS, BRH20, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

12"x 24" CHEVALIER, FSG-1224AD, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

10"x 20" CHEVALIER, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

H6004 HONES

SUNNEN, , MBC-1804M & MBC-1802MR, Power Stroke, Horiz.,


Fax: 905-669-7512) See Page 4

SUNNEN, MBB-1660K, Manual, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

SUNNEN, MBB-1650, Manual, Asst’d Tooling & Cabinet, (Trader


See Page 4

I4775 PRESSES, INSERTION

4 Ton HAEGER, , w/Stand, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

8 Ton PEMSERTER, Series 2000 (2002), PLC control, (Trader


See Page 4

I6200 IRONWORKERS

50 Ton “NEW” FERRIC, HIW 45, Single Operator, 5 Stations,


Fax: 905-820-3234) See Page 20

60 Ton “NEW” FERRIC, HIW 60 DC, Dual operator, 5 stations,


Fax: 905-820-3234) See Page 20

Z9000 MISCELLANEOUS Z9000 MISCELLANEOUS

PAGE 22 CLUE, April 2012

MACHINERY ADVERTISER

PUBLISHER

David Stapleford

PRINTED BY:

Ricter Web Printing

DELIVERY

Clue is delivered monthly and is sent bythird class mail on or before the businessday following the seventh of each month

DEADLINE

The deadline for advertising is the dayfollowing the last Wednesday of the month

ADDRESS

343 Smith AveBurlington, ON, L7R 2T9

Phone: 905-528-7765Fax: 905-917-0222

www.cluemachines.com

e-mail: [email protected]

MUST SELL

Cincinnati 10ga x 10'

Power Squaring Shear

Bliss #21

Punch Press

Contact: TCL Asset Group Inc.Ph: 416-736-1367 x228

Website: www.managingyourassets.com

Alberta

B F G Machine Tools Inc., Edmonton (Brian) ...................................780-434-7795........780-436-0717 .......15

British Columbia

ECCO Machinery, Surrey (Rick) ......................................................778-298-2023........778-298-2024 .......17

Modern Tool (BC) Ltd, Port Coquitlam (Pam) ..................................604-472-1444........604-472-1455 .......16

Ontario

Brighton Machinery Sales Inc, Ingersoll (Brian) ...............................519-485-7089........519-485-7368 .......15

Cameron Steel, Lindsay (Bob) ........................................................705-878-0544........705-878-0560 .......21

Compumachine Canada, Toronto (Peter).........................................416-291-9499........416-291-4990 .......22

Corporate Assets Inc, Toronto (Daphne) .........................................416-962-9600........416-962-9601 .......27

Dipaolo CNC Retrofit Ltd., Mississauga (Nelson) ............................905-676-9265 ......................................10

Fabtec Machine Tool Solutions Inc, Oakville (Raj)............................905-469-1586........905-469-3054 .......18

Ferric Machinery Inc, Mississauga (Koen) ......................................877-337-7424........905-820-3234 .........3

Haco Canada, Mississauga (Francis)..............................................905-828-1087........905-828-2062 .......26

Havlik Int’l Machinery, Cambridge (John) ........................................519-624-6240........519-624-4119 .......13

Hayden Lee, Markham (Hayden) ....................................................905-201-7841........905-201-7842 .......14

Hove Machine Services, Wasaga Beach (David) .............................705-429-5910........705-429-1557 .......15

Infinity Assets Solutions, Concord (Leslie) ......................................905-669-8893........905-669-7512 .........2

L S Walker Machine Tools Inc, Milton (Chris) ..................................905-876-0890........905-876-1959 .......12

Machine Solutions Inc., Guelph (Andrew) .......................................416-276-0596 ......................................25

Micro Trend Robotics Inc, Pickering (Peter) ....................................905-509-1218........905-509-2687 .......15

Nimesch Machinery, Markham (George) .........................................416-786-7762........905-415-3868 .........1

Nova International, Mississauga (Richard) ......................................905-624-4522........905-624-1917 .......15

Park Thermal International, Georgetown (Sales) ..............................905-877-5254........905-877-6205 .......15

Phase Quest, Mississauga (Harold) ................................................416-578-5399........416-753-7209 .......15

Powermaster Machinery Ltd, Mississauga (Peter)...........................905-624-9327........905-624-8591 .........5

S K Braly Machinery Inc, Mississauga (Steve) ................................905-793-8080........905-793-2190 .......23

Sabito Machinery Inc, Vaughan/Concord (David) ............................905-738-8730........905-738-5148 .........4

Stan Canada Machinery & Equipment Ltd, Brampton ......................416-252-5767........416-252-4770 .......15

TOS Trade Canada Inc., Milton (Marian)..........................................905-878-0888........905-878-9022 .......28

Trader Machinery Inc, Concord (Jonathan) .....................................905-669-7507........905-669-7512 .........6

Quebec

Boulanger Machinerie Inc, St-Ferdinand (Ben).................................418-428-4709........418-428-4710 .......15

Camex Machinery, Montreal (Elias).................................................514-581-5370........888-414-6441 .......17

Machinerie Gilles Lupien, Drummondville (Gilles)............................819-478-5266........819-478-5266 .......23

Machinery S. Tremblay, Drummondville (Sylvain)............................819-477-6677........819-477-6466 .......15

Soudogaz, St-Lambert de Lauzon (Charles)....................................418 889-2002 ........418 889-2012........25

Stock Machine Tools Co, Laval (Andre) ..........................................514-326-7006........514-329-2599 .......15

USA

Jordan Craig Machinery Int’l Inc, New City, NY (Jordan)..................845-398-0073........845-398-0074 .........8

S R I Advertising, Encino, CA (Susan) ............................................818-761-1792........818-793-0351 .......25

Y.Franke & Company, LLC., Hoffman Estates, IL (York)....................847-874-8972........847-596-8006 .........9

COMPANY PHONE FAX PAGE

ADVERTISERS DIRECTORY

CERTIFIED EQUIPMENT APPRAISALS * Toronto, OntarioPhone: (905) 793-8080 Fax: (905) 793-2190 Email: [email protected]

W W W . S K B R A L Y . C O M

CLUE, July 2010 Page 3

BRAKES, PRESSPACIFIC, 35-6, 35 Ton x 6’ CNCCHICAGO, BPO-412-6, 12ga x 48" Box & PanAMADA, RG-100, 110 Ton x 10’ CNC

DRILLS, MISCELLANEOUSSAALFELD, BS50 Pillar drill, 2" capacityBERGONZI, TM1600, 5’ Radial drillDOALL, TG-17 Geared Head drill

FACING & CENTERINGSENECA FALLS, EW-75 CNC w/Milling stationSENECA FALLS, EW-75 CNCSENECA FALLS, CS-LO, 5"x 42"

GRINDERS

KENT, KGS-200, 6"x 16" Manual surface grinderJONES & SHIPMAN, 540P, 6"x 18" HydraulicBROWN & SHARPE, Micromaster, 6"x 18" HydraulicNICCO, NFG-515HD, 6"x 20" Form grinderTOS, BRH20-02, 12"x 24" Hydraulic surface grinderBROWNE & SHARPE, 12"x 24"DECKEL, S1 Multi Axis, Tool & CutterBLANCHARD, 16" Vertical surface grinderTSCHUDIN, HG-400, 8"x 16", CylindricalSTUDER, S-36, 13"x 40" CNC, Cylindrical

LATHES, CNCDAEWOO, 10 HC CNC Turning CentreMAZAK, Super Quadrad 200 4-AxisCHEVALIER, FCL-1840, 18"x 40" Flatbed cnc lathe

LATHES, ENGINE

HARDINGE, HLV-H, 11"x 18" Precision LatheHARDINGE, HLV-H, 11"x 18" with DROMONARCH, EE, 12-1/2"x 20" Precision Engine LatheERL1340, 13"x 40" DRONAMSEON, 17"x 55"MORI SEIKI, MR-1500, 20"x 60"CHIEN YEH, 20"x 60"CHIEN YEH, CY560, 22"x 80"TOS, SN63/2000, 24"x 80"MORANDO, 24"x 120"PBR, TM-300, 24"x 196"

MACHINING CTRSENSHU, JE30S, Horz.OKUMA, MA40-HA, 16", Horz.MORI-SEIKI, NV-5000, Vertical

MILLS, VERTICALFIRST, LC, 9"x 42" 1-1/2EXCELLO, 602, 9"x 42"BRIDGEPORT, 9"x 42"FIRST, LC20VH, 10"x 50" Vert/HorizTOPWELL, 5VK, 10"x 50"DECKEL, FP 4, 16"x 28", Universal

PRESSES, HYDRAULICDAKE, PSM-20, 20 Ton manual, H-Frame shop press

PUNCHES, TURRETSTRIPPIT, 18-30

SAWSSTARTRITE, H330MV, 12", HorizontalDOALL, C916, 9"x 16", HorizontalGROB, 4V-18, 18", VeritcalDOALL, 36", VerticalSOCO, MC350 NFA Automatic cut-off saw, non-ferrous

SHEARS, POWER SQUARINGDIACRO, 16ga x 24" Hand shear with standEDWARDS, True-Cut, 10ga x 48"AMADA, M-2560, 1/4"x 8’

WELDERSAIRCO, CV-200 Aircomatic mig welder w/ wire feed15KVA FH Spot welder w/ Holden Hunt TransformerPRECISION, 50KVA Spot welder

TOOLINGWAHLI, MXH 300/200 Tool setter

MISCELLANEOUSBelt/disc sander, ROCKWELL DELTA, 429/02End Finishing Machine, SOCO, EF-PV/52Flex Arm Tapper, ROSCAMAT, 300Hot Melt Machine, BENCHMARK, 205-HPHot Melt Machine, BENCHMARK, 525Lapping machine, DOALL, Lapmaster, 16"Thread Rolling Machine, SHENG JIAN, Z28-63Tilting box table, 30"x 24"x 22"

Clue March, 2016

I6200 IRONWORKERS L0850 LASERS

PAGE 18 CLUE, April 2014

65 Ton “NEW” FERRIC, HIW 60, Single operator, 5 stations,


Fax: 905-820-3234) See Page 20

75 Ton KINGSLAND, 75XS, Dual operator, 5 stations (used),


Fax: 905-820-3234) See Page 20

80 Ton “NEW” FERRIC, HIW 80 DC, Dual operator, 5 stations,


Fax: 905-820-3234) See Page 20

100 Ton “NEW” FERRIC, HIW 100 DC, Dual operator, 5

stations, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 20

125 Ton “NEW” FERRIC, HIW 125 DC, Dual operator, 5

stations, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 20

55 Ton to 120 Ton “NEW” DURMA, , (Machine Solutions Inc.

Tel: 416-220-5910 See Page 2

100 Ton OMERA, , Mechanical, $3,900, (Machine Solutions Inc.

Tel: 416-220-5910 See Page 2

L0850 LASERS

2000 Watt “NEW” FERRIC, Fibermak, 60 x 120, Beckhoff

control, Lantek Expert, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 20

2000 Watt AMADA, LC1212A3XL (2004), 4’ x 8’, 17,000 hours,

New turbo blower, Ref# 10175, (Jordan Craig Machinery Int’l


2000 Watt SALVAGNINI, L3 Fiber (2011), 5’x 10’, Ref# 10255,


Fax: 845-398-0074) See Page 7

2000 Watt AMADA, Pulsar LC1212A2 (1998), 28,300 Hrs, New

Turbo Blower @ 23,400, Ref# 10406, (Jordan Craig


See Page 7

2000 Watt AMADA, Pulsar LC2415XLA3 (2000), Current

Machine Hours 34,000, Ref# 10414, (Jordan Craig Machinery




Tel: 877-337-7424, Fax: 905-820-3234) See Page 20

3000 Watt “NEW” FERRIC, Fibermak, 78 X 160, Beckhoff


Tel: 877-337-7424, Fax: 905-820-3234) See Page 20

3000 Watt TRUMPF, L2530 (1999), 4’x 8’, Siemens, 9483

Beam on hours, Ref# 9753, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

3000 Watt BYSTRONIC, BySprint Fiber 3015, Installed New:

2013, Ref# 10253, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

3200 Watt TRUMPF, TCL-3030 (2001), 5’x 10’, Ref# 9914,


Fax: 845-398-0074) See Page 7

3.2KW TRUMPF, L2030 (2009), 5’x 10’, Auto Loader/Unloader,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

3500 Watt TANAKA, TF-3500B (1996), 8’ x 95’, Fanuc 16L,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7



Tel: 877-337-7424, Fax: 905-820-3234) See Page 20

4000 Watt AMADA, FO MII RI 3015 (2012), 5’x 10’ Rotary

Index, Ref# 10320, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

4000 Watt TRUMPF, Trulaser (2006), 5’x 10’, 22,000 Beam on

hours, Ref# 10325, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

4000 Watt TRUMPF, Trulaser 3040 (2011), 80"x 160", Dual

Pallet, Ref# 10260, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

4000 Watt AMADA, Gemini FO4020 (2003), 80"x 160", Dual

Pallet, Ref# 10262, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

4000 Watt AMADA, FOMII 3015NT (2012), Ref# 10395,


Fax: 845-398-0074) See Page 7

4000 Watt AMADA, Gemini FO-3015NT (2005), 5’x 10’, Aprrox.

Hrs: 45,000, Ref# 10402, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

4000 Watt MAZAK, Hypergear 510 (2006), Installed New:2008,

Less than 8500hrs, Ref# 9707, (Jordan Craig Machinery Int’l


4000 Watt AMADA, Pulsar 2415NTA4 (2010), 8,500hrs, Ref#


Fax: 845-398-0074) See Page 7

4000 Watt TRUMPF, TCL3030 (2002), Siemans CNC, 60"x

120", Ref# 10412, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

4KW TRUMPF, Trulaser 3030 (2009), 5’x 10’, 22 Shelf

Tower/Liftmaster, Ref# 10431, (Jordan Craig Machinery Int’l


4000 Watt AMADA, LC3015F1NT (2012), 5’x 10’, Approx. 12,

000hrs, Ref# 10434, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

5000 Watt TRUMPF, L3050 (2005), 5’ x 10’, (Trader Machinery


5 KW TRUMPF, Trulaser 3030 (2010), 5’x 10’, Liftmaster,

Approx. 5000 Beam on hrs, Ref# 10352, (Jordan Craig


See Page 7

5000 Watt HK, FL-3015 (2011), 5’x 10’, Ref# 10259, (Jordan

Craig Machinery Int’l Inc Tel: 845-398-0073,

Fax: 845-398-0074) See Page 7

Clue March, 2016

L0850 LASERS M2824 MILLS, VERTICAL

5200 Watt BYSTRONIC, Byspeed 3015 (2005), 5’x 10’, Ref#


Fax: 845-398-0074) See Page 7

6000 Watt TRUMPF, Trulaser 5030 (2008), Liftmaster, Ref#


Fax: 845-398-0074) See Page 7

6KW AMADA, LC-3015F1NT (2011), 5’x 10’, Dual Pallet, Ref#


Fax: 845-398-0074) See Page 7

6KW BYSTRONIC, Bystar 4020 (2011), Rotary Axis &

Automation, Ref# 10422, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

MAZAK, FMS-A48-12 (2004), 6 Shelf loader, Ref# 9720,


Fax: 845-398-0074) See Page 7

L2150 LATHES, CNC

OKUMA ROBUSTURN, LFS15-2SP (1999), Twin Spindle,

4-axis, Dual chk, Dual Turret turning center, (Machinerie

Gilles Lupien Tel: 819-478-5266, Fax: 819-478-5266)

L3000 LATHES, ENGINE

12"x 36" LOGAN (by Powermatic), 2557 VLH, Variable speed, 3

& 4 jaw chucks, collets., (Brighton Machinery Sales Inc

Tel: 519-485-7089, Fax: 519-485-7368)

13"x 40" SHUN CHUAN, (2004), 2-Axis DRO, steady/follow

rest, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

14"x 40" JIMT, JIMT360, Toolroom, 10" chk, (Trader Machinery


16"x 40" ACRA, , DRO, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

18" x 60" “NEW” POWERTURN, 460, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

22"x 80" CHIEN YEH, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

26"x 120" CHIEN YEH, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

63"X 106" BOKO, D82H, Semi-Automatic Spinning lathe,


Fax: 905-669-7512) See Page 4

L6135 LATHES, N/C & CNC

OKUMA, LNC-8 (1997), OSP-700, 10" chuck, 15.75" Max Sw, 2"

Bar cap, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

MORI SEIKI, SL150S (1997), (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

MORI SEIKI, NL2500/700 (2006), MSX850 Control, 10"Chk, live

holders, C&Y Mill cap, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

HAAS, SL-20 (2005), Live Tool, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

12"x 40" HYUNDAI, HIT-30-S (1995), Seimens 840C, Over Bed

20", Mint cond., (Machinerie Gilles Lupien

Tel: 819-478-5266, Fax: 819-478-5266)

22"x 78.7" TOOLMEX, TUR560MN-2000 (2012), Siemens

840D, 16" Chk., (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

24.8"x 118" TOOLMEX, TUR630AMN-3000 (2008), Siemens

840D, 16” Chk., (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

M0130 MACHINING CTRS, HORZ

OKUMA, MX-60HB (1997), X-39.37" Y-31.5" Z-31.8", OSP7000,


Fax: 905-669-7512) See Page 4

M0185 MACHINING CTRS, VERT

HAAS, VF1 (2005), X-20" Y-16" Z-20", 15,000 rpm, (Trader


See Page 4

HAAS, VF-2SS (2011), X-30" Y-16" Z-20", 12,000rpm, (Trader


See Page 4

OKUMA, MX-45 VAE (1999), X-30" Y-19" Z-18", Table 40"x 20",

only 5378 hrs. cutting time, (Machinerie Gilles Lupien

Tel: 819-478-5266, Fax: 819-478-5266)

MAKINO, S56 (2007), X-35.4" Y-19.7" Z-17.7", Professional 5

CNC, 13,000 rpm, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

HURCO, (2013), 5-Axis, X-42" Y-24" Z-24", (Trader Machinery


HAAS, VF-5 (2013), X-50" Y-26" Z-32", 50 Taper, (Trader


See Page 4

M0850 MEASURING MACHINES

SHEFFIELD, Cordax D-28 (2009), Discovery III, Ref# 9855,


Fax: 845-398-0074) See Page 7

M1550 MILLS, CNC

SUPERMAX, , Knee type Centroid CNC, (Powermaster


See Page 8

JAFO, , Ram Type, Heidenhain, (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

M1659 MILLS, UNIVERSAL

10"x 50" TECHLEADER, , 5hp, 2 axis read-out, powerfeed, $5,

500, (Machine Solutions Inc. Tel: 416-220-5910 See Page 2

10"x 50" FIRST, , Horz/Vert, DRO, (Powermaster Machinery

Ltd Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

M2824 MILLS, VERTICAL

9"x 42/48" BRIDGEPORT, , w/Fagor DRO, (Trader Machinery


9"x 42" FIRST, LC 1-1/2 VS (2011), 2-Axis Heidenhain DRO,


Fax: 905-669-7512) See Page 4

CLUE, April 2014 PAGE 19

British Columbia

Masteel, Delta (Mary) ......................................................................604-952-4434.........604-952-4432 ........10

Modern Tool (BC) Ltd, Port Coquitlam (Pam) .................................604-472-1444.........604-472-1455 ........16

Manitoba

Empire Machinery & Tools, Winnipeg (Rick)...................................800-665-8089.........204-779-7796 ........19

Ontario

Brighton Machinery Sales Inc, Ingersoll (Brian)..............................519-485-7089.........519-485-7368.........11

CanAmera Machine Tools Inc., Cambridge (Marian)......................905-878-0888 ........................................13

DiPaolo Machine Tools Ltd., Mississauga (Nelson)........................905-676-9265.........905-676-9436 ..........3

Elliott Machinery Ltd, Oakville (Frank) ............................................905-829-2211 .........905-829-5600 ........18

Ferric Machinery Inc, Mississauga (Koen)......................................877-337-7424.........905-820-3234 ........20

Havlik Int’l Machinery, Cambridge (John) .......................................519-624-6240.........519-624-4119...........6

Infinity Assets Solutions, Concord (Leslie)......................................905-669-8893.........905-669-7512 ..........9

Machine Solutions Inc., Guelph (Andrew).......................................416-220-5910 ..........................................2

Park Thermal International, Georgetown (Sales) ...........................905-877-5254.........905-877-6205.........11

Powermaster Machinery Ltd, Mississauga (Peter) .........................905-624-9327.........905-624-8591 ..........8

S K Braly Machinery Inc, Mississauga (Steve) ...............................905-793-8080.........905-793-2190 ........12

TOS America Inc., Milton (Lee).......................................................905-876-0890.........905-876-1959 ..........1

Trader Machinery Inc, Concord (Jonathan) ....................................905-669-7507.........905-669-7512 ..........4

Walker Machinery Ltd., Milton (Chris) .............................................905-876-0890.........905-876-1959 ........15

Quebec

Machinerie Gilles Lupien, Drummondville (Gilles) ..........................819-478-5266.........819-478-5266.........11

Machinery S. Tremblay, Drummondville (Sylvain) ..........................819-477-6677.........819-477-6466 ........17

USA

Jordan Craig Machinery Int’l Inc, New City (Jordan) ......................845-398-0073.........845-398-0074 ..........7

COMPANY PHONE FAX PAGE

ADVERTISERS DIRECTORY

Clue March, 2016

9"x 49" EXCELLO, 602, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

10"x 50" RACER, , 40 Taper, 5HP, DRO, (Powermaster


See Page 8

10"x 50" TOPWELL, No.5VK, 2-Axis Anilam DRO, Power

Drawbar, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

M2833 MILLS, VERTICAL, CNC

9"x 49" BRIDGEPORT, , Acu-Rite MillPower 3-Axis CNC, R8

Taper, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

10"x 50" SOUTHWESTERN INDUSTRIES, TRAK K3 (2002),


Fax: 905-669-7512) See Page 4

N5230 NOTCHING MACHINES

1/4" x 8.6"sq “NEW” FERRIC, , variable angle, (Ferric


See Page 20

9"x 9"x 1/8" STRIPPIT, , Hyd., (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

O7397 OVENS

New & Reconditioned , Powered by Electric, Gas, Oil, Propane,

(Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

P2135 PLASMA CUTTING MACHINES

100 Amp MESSER MG, (2000), 6’x 10’, Hy-Definition, CNC

plasma, Metalmaster II, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

P6100 PRESSES, OBI

40 Ton BROWN BOGGS, , Air Assist Clutch, (Trader Machinery


60 Ton BLISS, C-60, 4"stk, A/C, (Brighton Machinery Sales Inc

Tel: 519-485-7089, Fax: 519-485-7368)

75 Ton TOLEDO, , Air Clutch & Brake, 5"stroke, (Brighton

Machinery Sales Inc Tel: 519-485-7089, Fax: 519-485-7368)

80 Ton BROWN BOGGS, 18LJA, 2.5"stk, 30-50spm, 26"x

36"bed, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

100 Ton CKD HRONOV, , TYP: LEND 100, A/C, Variable

Stroke Length, Command stamp ctls, (Brighton Machinery

Sales Inc Tel: 519-485-7089, Fax: 519-485-7368)

110 Ton NIAGARA, Model: A 5 1/2, 6" Stroke, Mech. Clutch

w/air assist, (Brighton Machinery Sales Inc

Tel: 519-485-7089, Fax: 519-485-7368)

P9050 PUNCHES, LOAD/UNLOAD

AMADA, MP1225NJ (1998), Automatic Load/Unloader, Ref#


Fax: 845-398-0074) See Page 7

P9150 PUNCHES, SINGLE STATION

60 Ton FABMASTER, (2011), Like new, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

P9275 PUNCHES, TURRET

16.5 Ton WIEDEMANN, Centrum 1000Q, w/Tooling, Fanuc OP,


Fax: 905-669-7512) See Page 4

19 Ton TRUMPF, Trupunch 1000 (2007), Only 3109hrs, Ref#


Fax: 845-398-0074) See Page 7

20 Ton TRUMPF, Trumatic TC3000L (2007), 2KW Truzx 2000,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

22 Ton WIEDEMANN, 2044 (2001), 30 Sta, 2 A/I, 114 Style,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

22 Ton AMADA, Apelio III 2510VL, Fanuc 160IL, 2KW Laser,

New 2003, Ref# 10372, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

22 Ton AMADA, EM2510NT (2006), AMNC NT CNC,

MP1225NJ, PR300III, Ref# 10401, (Jordan Craig Machinery


22 Ton AMADA, Vipros 255 (1997), Fanuc 18P, 31 Sta., 3A/I,

Ball Table, Ref# 9801, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

22 Ton STRIPPIT, V20 (2011), 1525 Fanuc 180I, 60"x 80", 34

Station, 4 A/I, Ref# 10413, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

M2824 MILLS, VERTICAL P9275 PUNCHES, TURRET


OvensFor Powder Coating, Aging,

Stress Relief, Normalizing

Gas or Electric

Numerous Sizes Available

Call: 905-702-4644

7055 Auburn Rd., Milton, ON L9T 7V9Ph: (905) 876-0890 Fax: (905) 876-1959

Email: [email protected]: www.walkermachinery.com

FEELER FTC-10CNC lathe

BORING MILLS, CNC, HORZ, FLOORUNION BFP 130 CNC, 5.12", (1994) 120"x 275", Heidenhain ctrlBORING MILLS, HORZ, TABLE4” TOS W100A, 44”x63”x63” trvls, 50 tpr, 4-axis DRO, new paint!, 19814” TOS W100A, 44”x63”x63” trvls, 50tpr, 4-axis DRO, new paint!, 19864“ TOS W100A, (2014) Remanufactured, 50 tpr spindle factory rebuilt to new tolerance, 5-axis Heidenhain DRO4” UNION CNC point to point, 44”x40”x63” trvls, TNC 135 Heidenhain control, very nice condition!4“ TOS W100A, 44"x 63"x 63" trvls, 4-axis DRO 49"x 49" rotary table, new 19964.3” TIGERCUT 110 CNC, 63"x 86" travels, Fagor CNC 1 degree index table, new 2005BORING MILLS, VERT72” G&L, CNC, 12 ATC, live tools, Refurbished 2009 Fanuc 21i ctlDRILLS, RADIALMAS VR 8A x 2500, 3" capLATHES, ENGINEChein Yeh, 20”x60”, 4-way toolpost, steady & follow rest, 3.25” bore, new paint!VDF 25”x120”, quick change toolpost, steadies, follow rest, 3 & 4 jaw chuck, excellent!TOS SN 63C, 25”x157”, 4-way toolpost, steadies, new 1998TACCHI, 50"x 315", (1973) Steadies, follow rest, 4-jaw chuckPOREBA TCG 160, 63"x 393", As New!NILES, 70"x 315", 3-bedway design, pendant control on carriage heavy dutyLATHES, N/C & CNCMORI SEIKI SL-6 CNC, 50hp motor, Fanuc 6T control, 15"chk new 1981

Feeler FTC 10 CNC, yr 1998, Fanuc control, 6” chk, chip conveyor, 8 sta. turretMACHINING CTRS, HORZNIIGATA HN 80 FC, 32"x 32" pallets, Fanuc 11m control, 6 pallet pool built in facing head and in/out spindle movement for boring mill applications, 120 ATC, new 1992MILLS, UNIVERSALTOS FGS 63T plus, 25"x 71", (2002) 3-Axis DRO, Variable speeds/feeds pendant ctl, 50 tpr, unv headZAYER 66MB, 28"x 80", 3-Axis DRO, Unv head, pendant ctl variable speeds/feedsMISCELLANEOUS50 plastic automotive skids, 45"x48" pallet - 4 way pick upCast Iron Floor Plates, 157" x 74" x 16" 2 AvailablePortable Drilling Unit, CLIMAX KM 3000Rotary Table, TOS ISO 16, 86"x 86", 60" Travel, 17 Ton, Rotary & Linear DRO

20Years

Clue March, 2016

CLUE, May 2010 PAGE 21

P9275 PUNCHES, TURRET R4704 ROLLS, ANGLE BENDING

22 Ton TRUMPF, TC2020R Bosch (2010), 50"x 100", Approx.

2,800 hrs, Ref# 10411, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

22 Ton STRIPPIT, V20 1525 (2011), Fanuc 180I, 60"x 80", 34

Station, 4A/I, Ref# 10413, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

23 Ton STRIPPIT, Global 20 (2003), Fanuc 180I, 4A/I, Thick

Style, Ref# 10423, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

25 Ton TRUMPF, TC6000L 1600 (2010), Laser/Punch,

Sheetmaster, Ref# 10191, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

25 Ton TRUMPF, TC5000R-1600 (2005), New linear amplifier,

14,039hrs, Ref# 10159, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

27.5 Ton TRUMPF, TC500R Bosch CNC (1993), 18 Station

Rotation, Ref# 10349, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

27.5 Ton TRUMPF, TC600L, Siemans 840D, Ref# 10378,


Fax: 845-398-0074) See Page 7

33 Ton AMADA, Vipros 358 King II, 58 Stn, Fanuc 18P, (Trader


See Page 4

33 Ton AMADA, Vipros 358 KingII (1999), Fanuc 18P, 4 A/I

MP1225NJ Load/Unload, Ref# 10383, (Jordan Craig


See Page 7

33 Ton AMADA, Pega 357 (1994), Fanuc O4PC, 58 Sta, 2 A/I,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

33 Ton YAWEI-NISSHINMBO, HPQ-3048 (2012), Siemens

Control, Thick style tooling, Ref# 10326, (Jordan Craig


See Page 7

33 Ton AMADA, ApelioIII 357V (2003), Fanuc 16L, 2000 Watt,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

33 Ton AMADA, ApelioIII 357V (1999), Fanuc 16L, 2000 Watt,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

33 Ton AMADA, EMK3610NT AMNC-F (2007), 60"x 100", Ref#


Fax: 845-398-0074) See Page 7

33 Ton AMADA, Vipros 368 King II (1998), Fanuc 18P CNC

control, Ref# 10363, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

33 Ton AMADA, Vipros 357 Queen (1998), Fanuc O4PC &

PHNC, 58 Sta, 2 A/I, Ref# 10179, (Jordan Craig Machinery


33 Ton AMADA, Vipros 358 KingII (1999), Fanuc 18P, 4A/I,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

33 Ton AMADA, Vipros 3610L (2000), L-Shear, 6 Shelf Loader,

Unload Conveyor, Ref# 10269, (Jordan Craig Machinery Int’l


33 Ton AMADA, EMK 3610NT (2007), (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

33 Ton AMADA, Vipros 358 King (1998), Fanuc O4PC, 4 A/I,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

33 Ton STRIPPIT, FC1250MH (1992), Fanuc OPB,

Load/Unload, Thick Style 4A/I, Ref# 10420, (Jordan Craig


See Page 7

33 Ton AMADA, Vipros 358 King (1998), Fanuc O4PC, 4A/I,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

33 Ton AMADA, Pega 357 (2000), Fanuc O4PC, 58 Sta, 2A/I,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

33 Ton AMADA, Pega 345K (1993), Fanuc O4PC, 58 Sta, 2A/I,


Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

33 Ton AMADA, Pega 367 (1987), Fanuc O4PC, 60"x 72", 58

Sta, 2A/I, Ref# 10433, (Jordan Craig Machinery Int’l Inc

Tel: 845-398-0073, Fax: 845-398-0074) See Page 7

50 Ton WIEDEMANN, Vectrum 5000, 72"x 60", 60" Throat, 54

Stn, tooling, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

R4704 ROLLS, ANGLE BENDING

2"x 2"x 3/16" “NEW” (Demo) TAURING, SAF DS 50HV,

Hydraulic, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

2"x 2"x 1/4" “NEW” FERRIC, APK50, Mod. Rolls, (Ferric


See Page 20

2.2"x 2.2"x 1/4" TAURING, SAF DS 60 HV, (Trader Machinery


2-3/8" x 2-3/8" x 1/4" “NEW” FERRIC, APK61, Mod. Rolls,

DRO, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 20

MODERN TOOL BC LTD.

New & Used Equipment, Machinery Sales | Toll-Free: 1-800-717-1440

Modern Tool BC LTD. offers an extensive line-up of new and used machine tools, fabricating, sheet metal, and production machinery.

1385 Kingsway Avenue, Port Coquitlam, BC V3C 1S2 | (604) 472-1444 | Toll Free: 1-800-717-1440

DURMA AD-R37175 CNC Hydraulic Press Brake

HYD-MECH S-20A IIIAutomatic Band-Saw

Need your equipment serviced? Our service department is available from Monday to Friday 9am to 5pm

On the web @ www.moderntoolbc.comFollow us on Twitter @ModernToolBC

Service & Parts Sales | Toll-Free: 1-800-717-1440

SCOTCHMAN 6509-24MHydraulic Ironworker

DURMA PBH-180Profile Bending Machine

Clue March, 2016

3-1/4"x 3-1/4"x 3/8" “NEW” FERRIC, APK81, Mod. Rolls, DRO,

Hyd. Side guides, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 20

4"x 4"x 3/8" “NEW” FERRIC, APK101, Mod Rolls, DRO, Hyd.

Side guides, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 20

6"x 6"x 1/2" PULLMAX, Z43, Hydraulic, Pendant Control, Digital

Readout, (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

R5603 ROLLS, PLATE BENDING

1"x 10’ PULLMAX, PV7H, Hyd., 3-Roll Double Pinch, (Trader


See Page 4

3/16"x 4’ “NEW” FERRIC, , ASM plate roll, DRO, mot. Bending

roll, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 20

3/16"x 5’ “NEW” FERRIC, , ASM plate roll, DRO, mot. Bending

roll, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 20

3/16"x 6.5’ “NEW” FERRIC, , ASM plate roll, DRO, mot.

Bending roll, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 20

5/16"x 8’ “NEW” FERRIC, , AHS 256 plate roll, 4 roll machine,

hardened rolls cone rolling, DRO, (Ferric Machinery Inc

Tel: 877-337-7424, Fax: 905-820-3234) See Page 20

1-3/4"x 6.5’ AHK 2035, plate roll, 3 roll machine, hardened rolls,

cone rolling, DRO, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 20

S0653 SAWS, BAND, HORIZONTAL

9"x 16" DOALL, , Semi-Auto, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

S0690 SAWS, BAND, VERTICAL

24" STARTRITE, , (Powermaster Machinery Ltd

Tel: 905-624-9327, Fax: 905-624-8591) See Page 8

9"x 16" DOALL, C916, Horizontal, Semi-Automatic, (Trader


See Page 4

10"x 13" BAXTER, No.115B, Roll-In-Saw, (Trader Machinery


12"x 14" RAM, , Vertical Roll-In Saw, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

S0805 SAWS, COLD & FRICTION

SOCO, MC350A (2001), (Machine Solutions Inc.

Tel: 416-220-5910 See Page 2

S0948 SAWS, MISCELLANEOUS

4"x 10" ELUMATEC, , Fully Automatic Circular Saw,

(Machinerie Gilles Lupien Tel: 819-478-5266,

Fax: 819-478-5266)

S4105 SHEARS, POWER SQUARING

10ga x 4’ ALLSTEEL, , Hyd, FOPBG, (Trader Machinery Inc

Tel: 905-669-7507, Fax: 905-669-7512) See Page 4

1/4"x 10’ PEARSON, , Hydraulic, (Machine Solutions Inc.

Tel: 416-220-5910 See Page 2

1/4"x 10’ JELSINGRAD, HSL306, Mot. Backgauge (used),


Fax: 905-820-3234) See Page 20

1/4"x 10’ “NEW” FERRIC, HGD 3100 x 6, Mot. CNC back

gauge, Auto gap, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 20

1/4"x 10’ HACO, (2007), CNC with 39" back gauge, $19,500,

(Machine Solutions Inc. Tel: 416-220-5910 See Page 2

1/4"x 10’ CINCINNATI, 1810G (1996), CNC Front/Rear, Ref#


Fax: 845-398-0074) See Page 7

1/4"x 12’ WYSONG, , Mechanical, CNC gauging, (Machine


1/2" x 10’ “NEW” FERRIC, HGD 3100 x 13, Mot. CNC back

gauge, Auto gap, (Ferric Machinery Inc Tel: 877-337-7424,

Fax: 905-820-3234) See Page 20

1/2"x 12’ ALLSTEEL, , Motorized BG adjustable rake and gap,

(Machine Solutions Inc. Tel: 416-220-5910 See Page 2

1/4"-1" x 8’-20’ “NEW” TOSKAR, , Hydraulic, (Machine


W3054 WELDERS, SPOT

20 KVA SIP, , (Trader Machinery Inc Tel: 905-669-7507,

Fax: 905-669-7512) See Page 4

Z9000 MISCELLANEOUS

Transformers 5 KVA to 1000 KVA, Large Assortment of used,

(Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

Pallet Trucks, (Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

Assorted Fans, (Park Thermal International Tel: 905-877-5254,

Fax: 905-877-6205)

Barfeeds LNS, Servo S3, (2007 & 2013) w/Remote pendant,


Fax: 905-669-7512) See Page 4

R4704 ROLLS, ANGLE BENDING Z9000 MISCELLANEOUS


SYLVAIN TREMBLAY MACHINERY

Milling, EAST-LION, with C-TEC Ctrl, 12”x 60”, CNC 3 AXIS, $9,500

TARNOW Lathe, TUJ50MX2000,1995, Fully Equipped, DRO

LEPONT Lathe (Italy), 40” x 16’,4.5” Spindle Bore, DRO

KONE 15TM (2 x 7.5TM) x 36', 25’ Lift,

Mint Condition

2 x 7.5 TM hoist KONE

CLEARANCE SALE, MUST BE SOLD

MABO, NEW DELTA,20” Stroke Sander

Roto-Die 10', model 10,mint condition

Universal milling GAMBIN, 3M,15” x 60”, 40 Taper

Contact: Sylvain Tremblay • Cell: (819) 314-4967 • [email protected]

ALL MACHINES

REVISED DOWN

PEMSERTER PS-5006 Tons capacity, 12” Throat

Clue March, 2016

PRE-OWNED MATSUURA V.PLUS-1000 VERTICAL MACHINING CENTER

YCM TCV3000A-5AF 5 AXES (3+2)

HIGH PERFORMANCE TRAVELING COLUMN VERTICAL MACHINING CENTER

SPINDLE: 12,000 RPM (20/25/29.5 HP) X-AXIS TRAVEL: 3,000mm (118.1”) Y-AXIS TRAVEL: 800mm (31.5”) Z-AXIS TRAVEL: 800mm (31.5”) TABLE SIZE: 3,500 X 800mm (137.8” x 31.5”) B-AXIS (HEAD): +/- 110 degrees C-AXIS (TABLE): 360,000 (0.001 degrees) ATC: 40 POSITIONS

ACCESSORIES: CHIP CONVEYOR 300 PSI COOLANT THROUGH SPINDLE DATA SERVER WITH ETHERNET (4GB) PROBES: RENISHAW NC-4 & RMP-40

PRE-OWNED 2013 MODEL COMMISSIONED IN 2014 WITH ONLY 250 CUTTING HOURS!!

Elliott-Matsuura Canada Inc. 2120 Buckingham Road, Oakville, ON, L6H 5X2

Tel: 905.829.2211 Fax: 905.829.5600 E-mail: [email protected]

Web: www.elliottmachinery.com

VANCOUVER * CALGARY * EDMONTON * WINNIPEG * TORONTO * MONTREAL * QUEBEC

CALL ELLIOTT DIRECT AT 905.829.2211 SPEAK WITH FRANK HAYDAR, FRANK BOLIEIRO, VINCE D’ALESSIO, OR TIM FRANKLIN

PRE-OWNED NAKAMURA WT250IIS MULTI SPINDLES / MULTI TURRETS

12,000 RPM / 30 HP / 40 ATC / TURBO MICROHINGE 500 CHIP CONVEYOR / TSUDAKOMA RZ-160 INDEXER /

FANUC SOFTWARE PACKAGE / HANDYMAN

L&R SPINDLES: 65mm BAR CAPACITY / FIVE AXIS / PARTS CATCHER A / TOOL SETTER / REAR DISCHARGE CONVEYOR / HAINBUCH SPANNTOP COLLET CHUCKS

Clue March, 2016

Clue March, 2016

M A C H I N E R Y

899 Danforth PlaceBurlington, ON L7T 1S1Phone: 905-528-7765

Fax: 905-917-0222

Clue March, 2016

FIBER LASER

Ontario and Eastern Canada:Showroom & Training Centre10 Natura Way, Cambridge, ON N3C 0G7

Western Canada:Westside Service Ltd.122 Broxburn Blvd.Lethbridge, AB T1J 4P4

toll-free # 1-877-337-7424 | [email protected]

www.ferricmachinery.com

Your One Stop Machine Shop

Contact us today for free admission to Fabtech 2016 in Toronto

We're looking forward to seeing you there from March 22 to 24 in Toronto or visit our

new showroom any time.

PROFILE ROLLS

PRESS BRAKES

PUNCH PRESS

PLASMA MACHINE

SHEARS

FLEXIBLE COIL PUNCHING LINES

PLATE ROLLS

16APRIL_Ferric_LaserV4.indd 1 2016-01-27 1:30 PM

Quality . Service . Value

Booth 705

march 2016 issue

Documents