mbf foundation: a storybook social company assembly ... · real funny brütsch/rüegger tools...
TRANSCRIPT
Real funny
Brütsch/Rüegger ToolsPromotional Supplier of the BMW Sauber F1 Team
Last Minute
Contents Pearls of wisdom
In focus
Independent monthly publication for tools and standard partsNumber 444, August 2010
Brütsch / Rüegger Tools Ltd.P.O. Box | CH-8010 ZurichPhone +41 44 736 63 63 | Fax +41 44 736 63 00www.brw.ch | [email protected]
Brütsch / Rüegger Tools Ltd.P.O. Box | CH-8010 ZurichPhone +41 44 736 63 63 | Fax +41 44 736 63 00www.brw.ch | [email protected]
Our partner
Servicebox
Measurement Technology
Production Technology
Assembly Technology
Forum
Standard Parts
Personal Protective Equipment
The new safety goggles by UNICO and EKASTU look more like sports and leisure goggles than safety goggles. Only safety gog-gles that are actually used can also protect your eyes. This is why safety goggles should look as appealing as possible. Benefi t from our introductory promotion! BRW 531 111, EKASTU safety goggles, CHF 11.–instead of CHF 14.30BRW 531 188, UNICO safety goggles, CHF 12.–instead of CHF 14.70
Offer valid until 31 August 2010.
Safety goggle promotion
You can only gain from our current special promotion of EDM electrodes! With one-off special discounts on electrolyte copper and tung-sten copper, we are giving you the opportunity to add to your store of material and save money at the same time. The attached brochure shows you the enormous choice of tubes, multi-channel tubes, tapped electrodes, circular/square/rectangular rods in dif-ferent sizes and plates both materials.At the same time, you will be saving twice at the same time – on material and on processing – it couldn’t be easier! This special offer is valid for three month – the durability of cop-per on the other hand is almost unlimited... Promotional brochure under reference number 42.08.
Special EDM electrode promotion
Wenger pocket knife, BRW 457 782, 20 parts: Fixed blade, wire bender, fl at blade screwdriver, spring-loaded scissors with serrated edge, Phillips screwdriver, multi-function pliers with insu-lation clamp, wire cutters, side cutters, wrench, open jaw wrench, etc. Price CHF 72.–.Wenger multi-function pocket knife, BRW 457 810: 12-part, fi xed serrated blade, combination pliers with wire cutters, metal fi le, hacksaw, Phillips size 3 and fl at blade screwdriver inserts, etc. Supplied in belt pouch. Price CHF 160.–.You will fi nd more new Wenger pocket knives at www.brw.ch, under “Wenger” in the quick search fi eld.
Swiss quality
Surface profi les are as variable as landscape pro-fi les. The Black Forest and the Alps are mountain ranges, which differ not only in their highest peaks but also in the form and width of their valleys. It is equally complex to describe a surface like a moun-tain landscape.For surface roughness measurements, the electri-cal sampling cut method with a mechanical tracing
stylus is assuming a central role. Roughness measuring equipment with a high-precision mounted diamond tip with a radius of 2 µm/60° or 5 µm/90° and a skid is used. Surface param-eters are given in µm. Don’t forget: a human hair has a thickness of 50 µm and a fi ngerprint 4 µm. Contact: [email protected].
...across mountains and valleys?
Further catalogues from Brütsch/Rüegger Tools at a glance Toolbook, Edition 17The big tool catalogue with thecomplete product range on 2800 pages,incl. fi xed price and stock list.Reference number 05.08 Normbook, Edition 3Professional Collection 2010Mould construction and stamping technologyReference number 06.08
SYLVAC µ_PRICES_10Reference number 01.08
Professional tools by Brütsch/RüeggerReference number 02.08
Pneumatic springs, HEAVY DUTY standardOptimised for the latest challenges in sheet metal processingReference number 03.08
FUTURO catalogue, 2010 editionThe new comprehensive catalogue for the exclu-sive Brütsch/Rüegger Tools house brand is here.370 pagesReference number 04.08
A wide range of services The new buildings allow services for industry, small businesses, the retail trades and private customers to be provided under ideal conditions. At the same time, a wide range of business sec-tors is covered: engineering, assembly, prefabri-cation and packaging, carpentry, garden and landscape maintenance, cultivation of organic vegetables and a laundry. A particular service is an external team which - under the supervision of a qualifi ed supervisor - carries out work on-site.
A focus on the mechanical side Work on mechanical parts takes place in the modern, well-equipped mechanical workshop. In addition, tasks from drawing to fi nishing of
MBF foundation: a storybook social companyAnyone who still thinks of social companies as “homes for the handi-capped” in the traditional sense should take a trip to the Swiss can-ton of Aargau. Here, the MBF foun-dation, “a social company for the handicapped in the Fricktal” recently inaugurated its new building: Mod-ern, simple architecture with clean lines, brightly lit workshops and a lavish company cafeteria for the workforce of more than one hun-dred. The MBF foundation is ISO-9001certifi ed and has the BSV-IV quality label. The carpenter’s shop is FSC certifi ed and complies with KPM 15 ISPM 15 directives. The company has the NPO label for management excellence. In short: the MBF foun-dation is a social institution that is available to business as a fully-fl edged market partner.
An extensive catalogue of jobs
In accordance with its charter, the MBF founda-tion offers people with a handicap appropriate jobs, occupation, training and residential place-ments. More than 90 people with a handicap use the residential facilities, a total of around 200 people working in different sections. The range extends from creative workshops for people with a severe handicap to training places for a federal EBA professional test. As a social com-pany recognized by the canton of Aargau, it has to comply with the conditions and directives of the Swiss Care Act. To implement all the de-mands and conditions and still provide a service tailored to the market requires a considerable degree of skill at all levels. To this end, business and group managers have attended supplemen-tary teacher training to add to their professional experience.
parts are carried out by a single source, includ-ing surface processing work by external part-ners. Steel, stainless steel, aluminium, copper, bronze and plastic is processed. Almost all com-mon types of metal processing are on offer, with the machine shop tools spanning the range from CNC machining centres and auto-matic saws down to simple bench drilling ma-chines.
Professionalism in procurement The MBF foundation shows its professionalism in procurement not only in the ordering of tools for everyday needs, where group leaders normally order directly via the www.brw.ch Toolshop. Be-sides minimising the cost of the procurement process, the compatibility of the new equipment and furniture to be purchased for the new build-ing with the existing inventory plays an impor-tant role. This is where Brütsch/Rüegger tools could demonstrate its traditional strengths: as Switzerland’s largest tool specialist – with the largest warehouse in Switzerland – all the neces-sary additions and new installations of Lista cabi-nets, superstructures, drawer storage cabinets, workbenches, wardrobes, etc. could be assem-bled in record time.
The MBF foundation’s portfolio Go to www.stiftung-mbf.ch to get more informa-tion. Or, at reference number 72.08 ask for the practical A5-size brochure (in German), which Modern machines help social companies provide services tailored to the market
Demanding assembly tasks using, for example, presses are also offered
A group leader setting up the CNC machining centre for the next job
Keeping an eye on everything, even for the simpler technical tasks
The spotless wardrobe - equipped by Brütsch/Rüegger Tools with Lista cabinets
sets out the MBF foundation’s complete range of goods and services.
Seminar with the BMW Sauber F1 team in HinwilTuesday 26 October 2010, starting at 1.30 p.m.
Tool management with removal systems and scanner solutions The Tool Box System is a modular system for controlled tool management. It provides tidy and safe tool storage, optimizes storage vol-umes, reduces storage costs, re-orders automati-cally and is available around the clock. The fully integrated scanner solutions are paperless data recording systems using barcodes. You do not need any data management software, since the entire process support system all the way to label printing is integrated in the Toolshop www.brw.ch. During the seminar, we will be showing you both inventory management systems and their opportunities for simultaneously improving quality and reducing costs. Ask for your invita-tion to the seminar quoting reference number 71.08 and enrol today. The charge per partici-pant is CHF 95.−. Applications will be dealt with in the order they are received.
Assembly technology: top performance with serviceThe assembly technology compe-tence centre clearly shows how much the requirements for tool pro-fessionals have changed: technical tool knowledge has become a core competence. Customers are think-ing increasingly in terms of com-plete processes and this is opening up a new tasks for full-range suppli-ers such as Brütsch/Rüegger Tools: tool labelling, fi lling of assembly sets to order, fi tting, servicing and upgrading complete tool sets in as-sembly vehicles, special foam inserts for tool drawers, etc. Brütsch/Rüeg-ger Tools is taking over multiple process steps up to and including the entire process, relieving the cus-tomers of laborious detail and coor-dination tasks.
The concept and how it works
Our customers describe to us all the tasks which their installation engineers carry out. This infor-mation is then used to create a specifi c tool re-quirement profi le. Brütsch/Rüegger Tools assem-bles a complete set of tools. These are ergonomically correct and technically matched to the task, of defi ned quality and in the pre-scribed sizes and weights. It must also be possi-ble to add to the set if it is found in practice that new tools are needed. The overall function is im-portant, so that the installation engineer can work at maximum effi ciency. The tools or brand names that are used to do this are of secondary importance. The concept is “great things in small packages”.
The concept as a processes Outsourcing individual processes and combin-ing them into overall processes with the sup-plier makes sense: instead of expensive orders for individual tools, there is simply one cata-logue number for the set. Details are fi led at Brütsch/Rüegger Tools on Myshop in a purchas-ing list and can be repeated with a single click (www.brw.ch). You hand over servicing, in-spection and fi lling to the Brütsch/Rüegger Tools specialist, so that the technician can con-centrate fully on his work. Your Brütsch/Rüeg-ger Tools contact is responsible for everything else.
The concept for the customer Speed and effi ciency play an important role in the areas of servicing, inspection, cleaning and re-placement of tool sets and the equipment for com-plete assembly vehicles (see picture on title page). At this point, Brütsch/Rüegger Tools can demon-strate one of its strengths: assembly vehicles come directly on to the ramp and the tool sets directly into the picking room, where the content is checked by experts and parts are replaced. The paths are extremely short, the Brütsch/Rüegger Tools technician is familiar with every tool and whips everything into shape. For assembly technol-ogy services, please contact [email protected].
Checking, cleaning or replacing each tool in a assembly tool vehicle
Filling a FUTURO fitter’s tool case
Equipping an assembly case according to the customer’s specification
Filling a tool roll for the machine industry
Organising tools in a toolbox
A guide to concentration
Hartmut Volk, MBA and freelance business publisher, Bad Harzburg
Experience fl ow in realityConcentrated working can be learned. Par-ticularly when your head is bursting and your list of tasks seems never-ending, you should take a deep breath and relax. External peace can be created with a daily time slot when you ensure you are not interrupted. This time is best spent on demanding and diffi cult tasks.However, concentration also needs intelli-gent organization: this includes a task list with set priorities, a weekly plan as well as a to-do list.Anyone who takes this to heart and can focus completely on a problem forgets time and himself, is fully absorbed by what he is doing and experiences so-called fl ow: everything comes together and moves as if by itself. An incomparable feeling!Interested? Request your personal copy (2 pages in German) by quoting reference num-ber 70.08 on www.brw.ch in the Toolnews/Publications section (PDF fi le).
µ_PRICES_10
Schweizer Hersteller von Präzisionsmessinstrumenten seit 1969
VerzeichnisS_Cal PRO 2
S_Cal ONE 2
S_Cal MICRON 3
S_Mike PRO 4-5
Satz S_Mike PRO & S_Cal PRO 5
S_Dial ONE 6
S_Dial S229 7
S_Dial S213 8
S_Dial S233 / S234 8
X_Treme SXTD / SXTH 9
Ultima 9
S_Cal UL III 10
Hi_Cal Satz 11
S_View D50S / D50S PRO 12
S_View D60S PRO 13
S_View D200S 14-15
S_Dial ONE
S_Cal MICRON
D60S PRO
S_Cal PRO
S_Mike PRO
S_Cal ONE
Gültigkeit 31.12.2010
WuWuW susu chhhhhhh
Die Profitoolsvon Brütsch/Rüegger
ich bin einabsoluterprofi!
aber nureiner vonvielen.
Genau.
Gasdruckfedern,Standard ‒HEAVY DUTYFür die neuen Herausforderungen in derBlechbearbeitung optimiert
The 5xD FUTURO VHM spiral bit is now also available from stock (BRW 255 570) with a whistle-notch clamping surface. This makes application easier – in particular on lathes. This tool distin-guishes itself through its concave cutting geometry with point thinning and special bevel as well as the high-quality coating on a TiAlN-TIN base. This makes an unusually broad range of applications in various materials possible.
FUTURO VHM 5xD spiral bits
How convenient.It‛s a leafletfor a glazier.
A worthwhile connectionScrew cap testingUncompromising precisionBENZING – proven over the years
FRANKEN toolsSolinos – the ideal solutionDixi VHM machine reamersFuturo VHM spiral bits
EREM – Swiss madeNew PFERD grinding segmentsTool and service chest all in oneWENGER pocket knives
MBF foundation: the storybook social company with an extensive task catalogue, a wide range of services and professionalism in procurement
FIBRO heavy duty pneumatic springsTempered couplingsSummer promotion setsSpecial promotion – EDM electrodes
Hearing protection that fits!PUMA safety shoesHand cleaning on the moveSafety goggles offer
Brütsch / Rüegger Tools Ltd.P.O. Box | CH-8010 ZurichPhone +41 44 736 63 63 | Fax +41 44 736 63 00www.brw.ch | [email protected]
Personal Protective EquipmentAssembly Technology Standard PartsMeasurement Technology Production Technology
Brütsch / Rüegger Tools Ltd.P.O. Box | CH-8010 ZurichPhone +41 44 736 63 63 | Fax +41 44 736 63 00www.brw.ch | [email protected]
You only have two eyes and so you should pro-tect them. The new EKASTU safety goggles fea-ture a modern, sporty design. A large fi eld of vision offers all-round protection for your eyes. The profi led nosepiece, pleasantly soft earpiec-es and the low weight assure a high level of wearer comfort.The EKASTU safety goggles (BRW 531 111) are available in clear and grey for CHF 11.–.
EKASTU safety goggles
Ideal for installers or anyone who does not have access to soap and water. STOKO cleaning cloths will clean your hands without water, even in case of tough dirt. The cleaning cloths (BRW 537 285) are available in bags of 10 sheets or handy buckets of 70 sheets. You will fi nd a full range of skin protection products offered by Brütsch/Rüegger Tools at www.brw.ch.
Hand cleaning on the road
Hearing protection that fi ts!
Hearing protection that does not fi t causes pressure and pain in the ear, counteracting reg-ular use. In many cases, the result is that hearing protection is not worn at all and one simply takes noise in stride without being aware of the consequences of excessive sound exposure. Hearing damage is often irreparable and can-not be reversed! Jrenum is hearing protection that is customised to your ears. As the images show, your hearing protection is made to measure based on a cast of your ear. This level of customisation ensures that your hearing protection fi ts your ears per-fectly, avoiding any unpleasant pressure. Expe-rience has shown that Jrenum hearing protec-
tion users don’t even notice the “ear plug” after wearing it for a while. We at Brütsch/Rüegger Tools consider it especially important that the entire process (from consultation to delivery) is handled by a true professional! This is why we come to you with the manufacturer and evalu-ate your hearing protection needs, customised to your company and your ears – because safety is also a matter of trust. Give us a call – our specialists Marc Hugelshofer, 044 736 64 48, and Domenico Iapello, 044 736 64 88, will be glad to help you.
PUMA Safety ShoesSafety footwear by PUMA Safety Shoes features an appealing modern and sporty design. The plastic cap and fl exible puncture protection as-sure all-round safety for your feet. Breathable textiles maintain a pleasant climate during the entire period of use. The safety shoe (BRW 534 002) is available in sizes 39–48 from inventory at Brütsch/Rüegger Tools – for only CHF 123.–.
The uvex u-fi t nitrile features an outstanding fi t and is the perfect choice for tasks that require manual dexterity and mechanical skills. The u-fi t is especially popular for fi ne assembly. Fea-tures appreciated by the wearer include charac-teristics such as a secure grip, optimum fi t and high strength. The u-fi t disposable protective gloves (BRW 530 415) are now available at the promotional price of CHF 12.90.
uvex u-fi t disposable protective gloves
New: FIBRO heavy duty pneumatic springs
The “new” standard heavy duty pneumatic springs are designed specially to meet the new imperatives in sheet metal processing (including, for example, high-strength sheet steel). They combine the greater spring forces of the BRW 865 055 POWER LINE pneu-matic springs with the outside dimensions and strokes of the standard BRW 865 050 springs. Properties:• spring forces starting at 1000 daN up to 9500 daN,
with strokes of up to 300 mm• standardized dimensions according to ISO-VDI-
CNOMO• unique safety features of FIBRO gas springs:– safety piston rod– overpressure protection - overstroke protection• the springs can be interconnected quite simply via
the lateral gas fi lling connection
• great fi xing fl exibility, from the top mounting and lower fi xing grooves, together with the tapped bores in the spring base
• optional gas connection in the spring base for hose compound or composite panel connection
For more information, please order the documenta-tion under reference number 03.08.You will fi nd our large range of FIBRO pneumatic springs at www.brw.ch – Standard parts – Spring ele-ments – Pneumatic springs
In our summer promotion until 31.08.10, we are also offering attractive sets at top prices. Two ex-amples: BRW 860 200, sets with 382 or 404 NBR, FPM or EPDM O-rings, metric or imperial, starting at CHF 53.–, BRW 861 340, set with 577 retaining rings DIN 471/DIN 472 for shafts or bores for CHF 233.–.Promotion brochure available under reference number 41.08.
Sets summer promotion
Quality that speaks for itself.Tempered couplings from Brütsch/Rüegger Tools are renowned for their quality and reliability! Made of brass with FKM O-rings, these couplings are de-signed for operating pressures of up to 20 bar and temperatures of up to 200°C (standard couplings) or 180°C (Safe Lock™ couplings). You will fi nd all H and D type couplings in the Normbook Edition 3 starting on page 130 or in our Toolshop at www.brw.ch – Advanced search - Standard parts – Cooling and heating elements.
When the design makes the installation of conven-tional ejectors impossible or when you need to eject thin-walled injection-moulded parts, we have the ideal solution for you: Static or dynamic pneumatic ejectors are attractive due to their extremely space-saving design and their large ejector end face. Both of these high quality products, BRW 837 520 and BRW 837 540, can be supplied from stock!
Top product: Pneumatic ejectors
As the only provider of FIBRO guide elements, we give you the opportunity to decide on the guide play of sliding guides or the camber of ball tracks your-self. Pairing classifi cation gives you the freedom to match guide elements precisely to your needs and in this way create the ideal conditions for best quality. You can download our “Guide columns – guide sleeves – selection matrix” brochure at www.brw.ch/Toolnews/Downloads Publications/Brochures.
Defi ne the pairing yourself
New PFERD grinding segmentsThe PFERD grinding segments, BRW 482 470, are outstanding for machining sand forms and sand cores, for rectifying and reworking junctions and mould release. Their wedge shape makes them ide-al for working in confi ned spaces as well as on large areas. Available types: length 235, grain 46, width 32/5 mm and length 246 mm, grain 46, width 42/4 mm. CHF 8.05 each.
New L-Boxx assortment case, BRW 548 160 (empty) or L-Boxx small parts case, BRW 548 170, with insert trays, in various versions. For safe stowing of power tools and small parts. With carrying handle and side grips. With a click mechanism to interconnect the boxes; for heavy loads. Joined boxes can be carried or moved easily by gripping the topmost one; the lid can take a load of up to 100 kg. More in our BOSCH brochure, reference 32.08.
Tool and service chest in one!
EREM – Swiss made
EREM electronic pliers made from high alloy steel, representing the very best Switzerland can pro-duce. The advantages: • replaceable foam handles, proof against electro-
static discharges• invisible spring providing gentle and constant
tension guarantees more than 1 million closing cycles
• special cutting edge for the desired cutting shape• induction-hardened cutting 63–65 HR for a very
long lifespan• opening of the tips limited to 5 mm, preventing
your hand from tiring
• special stop system preventing the cutters from overlapping
• Precision joints for smooth opening and closing• Good price/performance ratio The pliers are made from a cold drawn steel section and are not forged. The special tool steel is manu-factured using a unique Swiss process. You will fi nd our full range of EREM electronic pli-ers in the Toolshop at www.brw.ch when you enter “EREM” in the quick search fi eld.
New to our range: the Wera bit set, BRW 437 615, with 1/4” C 6.3 Allen key, in plastic box with quick-change mount and 29 bits including Allen key, Phil-lips, Pozidriv, fl at blade, Torx® and Torx® torsion blades. The promotion price of CHF 36.− (instead of CHF 73.−) is valid until 30.04.2011. For more Wera products, order our current Pole Position brochure see reference number 31.08.
Wera bit set promotion
The new hydraulic machine lifter FUTURO, BRW 554 041, lifts heavy loads easily, quickly and safely. Lifts with head or foot, reversible lifting claw, rotat-able radial arm base, removable pumping lever and folding carrying handle. Painted RAL 1023 yellow. Type NTG 30: safe working load 3 tons, price CHF 368.–; Type NTG 80: safe working load 8 tons, price CHF 482.–.
Effortless lifting!
Hanhart guarantees innovative technology and at-tractive product benefi ts in time measurement. To-day’s most important stopwatch manufacturer for mechanical stopwatches leaves nothing to be de-sired. Whether for sport or for industry, our stop-watches can be used in many fi elds. Special models are available upon request. You will fi nd our wide range of analogue and digital stopwatches in the Toolshop at www.brw.ch / BRW 170 130–170 430.
Stopwatches by Hanhart
In our complete Toolbook 17 catalogue (www.brw.ch) we are offering you under BRW 109 397 and BRW 109 412 the new FUTURO BASE LINE workshop callipers: the universal version with large, easy to read LCD dis-play, ON/OFF function, changeover between mm and inches, etc. For the dimensions 200 mm and 300 mm, models with and without fi ne adjustment are avail-able. All models come with a calibration certifi cate and are available from stock. Order today, use them tomorrow!
The notorious workshop assistant...
Azurea plug gauges with square ends and inter-changeable steel bodies in proven Swiss quality are available individually or as sets. Plug gauges are available up to Ø 20.00 mm in increments of 0.01 mm with an accuracy of 0.0004 mm (up to Ø 5 mm from stock). Other increments are available upon request. You will fi nd these outstanding products in our Toolshop at www.brw.ch / BRW 164 100–164 120.
Uncompromising precision
Benzing plan tables (www.brw.ch, BRW 127 360–127 450) have been in Brütsch/Rüegger’s range of tools for many years. Their robust construction and high quality production makes them ideal plan ta-bles, particularly for precise measurements. We of-fer ceramic and steel tabletops, in circular, rectan-gular or square versions. A helper you can trust. We are happy to advise you: [email protected] / [email protected], Tel. +41 44 736 63 63.
BENZING - proven over the years
With the MECMESIN TORNADO torque measuring device, BRW 172 410 (www.brw.ch), you can simply and accurately measure the torque when removing or tightening screw caps. The construction of these appliances from MECMESIN is very robust. They are IP54 protected and have an accuracy of ± 0.5% of the full measuring range. They were developed specially for testing screw caps on bottles. MECME-SIN products are used in a wide variety of industry sectors and have an excellent reputation world-wide. Brütsch/Rüegger tools is MECMESIN’s offi cial representative in Switzerland and would be happy to advise you on specifi c issues and measurement problems. Your contact: [email protected].
Screw cap testing –as easy as abc
The user-friendly IMBUS plug-in module system from IBR (www.brw.ch), BRW 154 735, opens a wealth of opportunities for connecting your digital measuring equipment to a PC by cable. Depending on the chosen module, you can connect a range of measuring equipment, such as measuring sensors, callipers, micrometer gauges, altimeters, roughness measuring devices, etc. Take note - measuring equipment from different manufacturers may come with different interface protocols. If necessary, we can program special interface drivers. With the help of the IBREXDLL software, BRW 154 745, you can import and analyze your measurement data direct-ly in MS EXCEL. Further information from: [email protected] or [email protected].
A worthwhile connection
Technische Information TI-D.016 [DE]Führungssäulen-Führungsbuchsen-Auswahlmatrix
Führungssäulen
ECO-Line
2021.29.
202.29.
202.31.
Rz2.5
h4-0.002
-0.007
ÑÑ
Ñl
ll
ll
ll
ll
ll
Führungssäulen
für
Großw
erkzeuge
2022.12.
2022.13.
2022.15.
2022.16.
2022.17.
2022.19.
2022.29.
Rz4
f6-0.025
-0.041
ÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñl
ll
ll
Führungssäulen
nach
CNOMO
2022.16.45.
Rz4
-0.010
-0.025
ÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñl
ll
ll
Führungssäulen
nach
AFN
OR
2022.25.
Rz4
h50
-0.011
ÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñl
ll
ll
Führungssäulen
mit
Mittenbund
2020.62.
202.60.
Rz1
.10
0-0.002
l1
l1
l1
Rz1
.20
-0.002
-0.004
l1
l1
l1
Rz1
.30
-0.004
-0.007
l1
l1
l1
Führungssäulen
mit
Mittenbund
2020.63.
2020.64.
Rz1
h30
-0.004
l1
l1
l1
Führungssäulen
nach
DIN
9825
Führungssäulen
zum
Anschrauben
Wechsel-Fürhungs-
säulen
202.17.
2021.50.
202.19.
2021.58.
202.21.
2021.44.
202.22.
2021.46.
202.23.
202.55.
202.24.
Rz1
.10
0-0.002
l1
l1
l1
l1
l1
l1
Rz1
.20
-0.002
-0.004
l1
l1
l1
l1
l1
l1
Rz1
.30
-0.004
-0.007
l1
l1
l1
l1
l1
l1
Führun
gssäulen
Oberflächen-qualität
Toleranz-bereich
Toleranzenfür ø40
-0.006-0.008
-0.008-0.010
-0.010-0.013
+0.014+0.010
+0.018+0.014
+0.024+0.018
+0.016+0.003
+0.015+0.004
+0.011+0.003
Toleranz-bereich
.10
.20
.30
.10
.20
.30
H6
IT5
H5
Ober-flächen-qualität
Rz1
Führungsbuchsen2061.44. 2081.44.206.49. 2081.45.2061.47. 2081.46.2081.67. 2081.47.2091.67. 2081.49.2091.44. 210.44.2091.45. 210.45.2091.46. 210.46.2031.41. 2031.42.2031.44.
2031.31. 2081.31.2031.34. 2081.32.2031.38. 2081.33.2051.32. 2081.34.2091.31. 2081.35.2091.32. 210.31.2091.34. 210.34.
210.35.
Kugelführungsbuchsen
Säulenblöcke mit Kugelfüh-rungsbuchsen
FRANKEN: new, powerful tools for demanding processesFranken tools are invariably a good choice for de-manding processing jobs.Brütsch/Rüegger Tools has considerably extended their range of Franken products and brought it up to date.High performance roughing cutters without (BRW 221 870) and with (BRW 221 875) interior cooling are particularly suitable for use in mechanical engi-neering. The Enorm mill for universal use, with inte-rior cooling, is available as a shaft cutter (BRW 221 160) and as a torus cutter (BRW 221 150). The universally stable ball cutter (BRW 221 600) is avail-able in diameters from 0.2 mm upwards.The multi-cut VHM carbide cutter (BRW 221 710) enables to you to achieve grinding quality. HSC cut-ters with the VHM carbide ball cutter (BRW
221 765) and the VHM torus carbide cutter (BRW 221 730) reduce polishing costs. The VHM carbide ball cutter (BRW 221 770) and the VHM torus car-bide cutter (BRW 221 745) are particularly suitable for milling with protruding lengths up to 12 x d.Cutting speeds in the information sheets will also help you when using these new tools.Take a look at our extended range. It is worthwhile! Profi t from a 20% discount up until 30.11.2010.Our technicians will be pleased to advise you – also on-site. Phone +41 44 736 63 63.
The brand new Magafor Bi-Face forward and re-verse deburrer is the ideal tool for effi cient deburr-ing. These deburrers are available from stock in the 90° mini version (BRW 224 130), the 90° degree standard version (BRW 224 135) and the 60° stan-dard version (BRW 224 140). All three versions are available uncoated or with Hard’X coating.Try this tool for yourself during our extended 25% introductory promotion until 30.11.2010.
Effi cient deburring – Extended promotion
Improve tool durability –an easy achievement through better cooling and lubrication. The REGO-FIX type KS/ER cooling disc (BRW 339 240) features a peripheral coolant supply. This results in better chip removal and therefore noticeably greater durability. The universal cooling disc is compatible with all REGO-FIX collet chucks (BRW 339 000 and BRW 339 040) as well as the cor-responding clamping nuts (BRW 339 200).These are available from stock at BRW as usual.
The DIXI 4007 carbide reamer (BRW 284 080) allows you to produce all tolerances accurately. The reamer with left-hand rifl ing and a right-hand cut is available in 120 sizes, in diameters from 0.48 mm to 12.02 mm and with tolerances of 0/0.003 mm. With interior cooling from a diameter of 2.97 mm upwards.Get an overview at www.brw.ch.
Dixi VHM machine reamers
The new solinos single clamp for small parts from Gressel (BRW 413 370) is an ideal and cost-effective production solution. The solinos reveals its strengths whether used as a multi-point clamping system, on palette changers or to clamp tombstones. The com-pact, lightweight design (approx. 5.5 kg) with a relatively large clamping range of 0–156 mm (with VS jaw) and the high clamping force of up to 20 kN leaves little to be desired.
An ideal solution for your production
Brütsch / Rüegger Tools Ltd.P.O. Box | CH-8010 ZurichPhone +41 44 736 63 63 | Fax +41 44 736 63 00www.brw.ch | [email protected]
Personal Protective EquipmentAssembly Technology Standard PartsMeasurement Technology Production Technology
Brütsch / Rüegger Tools Ltd.P.O. Box | CH-8010 ZurichPhone +41 44 736 63 63 | Fax +41 44 736 63 00www.brw.ch | [email protected]
You only have two eyes and so you should pro-tect them. The new EKASTU safety goggles fea-ture a modern, sporty design. A large fi eld of vision offers all-round protection for your eyes. The profi led nosepiece, pleasantly soft earpiec-es and the low weight assure a high level of wearer comfort.The EKASTU safety goggles (BRW 531 111) are available in clear and grey for CHF 11.–.
EKASTU safety goggles
Ideal for installers or anyone who does not have access to soap and water. STOKO cleaning cloths will clean your hands without water, even in case of tough dirt. The cleaning cloths (BRW 537 285) are available in bags of 10 sheets or handy buckets of 70 sheets. You will fi nd a full range of skin protection products offered by Brütsch/Rüegger Tools at www.brw.ch.
Hand cleaning on the road
Hearing protection that fi ts!
Hearing protection that does not fi t causes pressure and pain in the ear, counteracting reg-ular use. In many cases, the result is that hearing protection is not worn at all and one simply takes noise in stride without being aware of the consequences of excessive sound exposure. Hearing damage is often irreparable and can-not be reversed! Jrenum is hearing protection that is customised to your ears. As the images show, your hearing protection is made to measure based on a cast of your ear. This level of customisation ensures that your hearing protection fi ts your ears per-fectly, avoiding any unpleasant pressure. Expe-rience has shown that Jrenum hearing protec-
tion users don’t even notice the “ear plug” after wearing it for a while. We at Brütsch/Rüegger Tools consider it especially important that the entire process (from consultation to delivery) is handled by a true professional! This is why we come to you with the manufacturer and evalu-ate your hearing protection needs, customised to your company and your ears – because safety is also a matter of trust. Give us a call – our specialists Marc Hugelshofer, 044 736 64 48, and Domenico Iapello, 044 736 64 88, will be glad to help you.
PUMA Safety ShoesSafety footwear by PUMA Safety Shoes features an appealing modern and sporty design. The plastic cap and fl exible puncture protection as-sure all-round safety for your feet. Breathable textiles maintain a pleasant climate during the entire period of use. The safety shoe (BRW 534 002) is available in sizes 39–48 from inventory at Brütsch/Rüegger Tools – for only CHF 123.–.
The uvex u-fi t nitrile features an outstanding fi t and is the perfect choice for tasks that require manual dexterity and mechanical skills. The u-fi t is especially popular for fi ne assembly. Fea-tures appreciated by the wearer include charac-teristics such as a secure grip, optimum fi t and high strength. The u-fi t disposable protective gloves (BRW 530 415) are now available at the promotional price of CHF 12.90.
uvex u-fi t disposable protective gloves
New: FIBRO heavy duty pneumatic springs
The “new” standard heavy duty pneumatic springs are designed specially to meet the new imperatives in sheet metal processing (including, for example, high-strength sheet steel). They combine the greater spring forces of the BRW 865 055 POWER LINE pneu-matic springs with the outside dimensions and strokes of the standard BRW 865 050 springs. Properties:• spring forces starting at 1000 daN up to 9500 daN,
with strokes of up to 300 mm• standardized dimensions according to ISO-VDI-
CNOMO• unique safety features of FIBRO gas springs:– safety piston rod– overpressure protection - overstroke protection• the springs can be interconnected quite simply via
the lateral gas fi lling connection
• great fi xing fl exibility, from the top mounting and lower fi xing grooves, together with the tapped bores in the spring base
• optional gas connection in the spring base for hose compound or composite panel connection
For more information, please order the documenta-tion under reference number 03.08.You will fi nd our large range of FIBRO pneumatic springs at www.brw.ch – Standard parts – Spring ele-ments – Pneumatic springs
In our summer promotion until 31.08.10, we are also offering attractive sets at top prices. Two ex-amples: BRW 860 200, sets with 382 or 404 NBR, FPM or EPDM O-rings, metric or imperial, starting at CHF 53.–, BRW 861 340, set with 577 retaining rings DIN 471/DIN 472 for shafts or bores for CHF 233.–.Promotion brochure available under reference number 41.08.
Sets summer promotion
Quality that speaks for itself.Tempered couplings from Brütsch/Rüegger Tools are renowned for their quality and reliability! Made of brass with FKM O-rings, these couplings are de-signed for operating pressures of up to 20 bar and temperatures of up to 200°C (standard couplings) or 180°C (Safe Lock™ couplings). You will fi nd all H and D type couplings in the Normbook Edition 3 starting on page 130 or in our Toolshop at www.brw.ch – Advanced search - Standard parts – Cooling and heating elements.
When the design makes the installation of conven-tional ejectors impossible or when you need to eject thin-walled injection-moulded parts, we have the ideal solution for you: Static or dynamic pneumatic ejectors are attractive due to their extremely space-saving design and their large ejector end face. Both of these high quality products, BRW 837 520 and BRW 837 540, can be supplied from stock!
Top product: Pneumatic ejectors
As the only provider of FIBRO guide elements, we give you the opportunity to decide on the guide play of sliding guides or the camber of ball tracks your-self. Pairing classifi cation gives you the freedom to match guide elements precisely to your needs and in this way create the ideal conditions for best quality. You can download our “Guide columns – guide sleeves – selection matrix” brochure at www.brw.ch/Toolnews/Downloads Publications/Brochures.
Defi ne the pairing yourself
New PFERD grinding segmentsThe PFERD grinding segments, BRW 482 470, are outstanding for machining sand forms and sand cores, for rectifying and reworking junctions and mould release. Their wedge shape makes them ide-al for working in confi ned spaces as well as on large areas. Available types: length 235, grain 46, width 32/5 mm and length 246 mm, grain 46, width 42/4 mm. CHF 8.05 each.
New L-Boxx assortment case, BRW 548 160 (empty) or L-Boxx small parts case, BRW 548 170, with insert trays, in various versions. For safe stowing of power tools and small parts. With carrying handle and side grips. With a click mechanism to interconnect the boxes; for heavy loads. Joined boxes can be carried or moved easily by gripping the topmost one; the lid can take a load of up to 100 kg. More in our BOSCH brochure, reference 32.08.
Tool and service chest in one!
EREM – Swiss made
EREM electronic pliers made from high alloy steel, representing the very best Switzerland can pro-duce. The advantages: • replaceable foam handles, proof against electro-
static discharges• invisible spring providing gentle and constant
tension guarantees more than 1 million closing cycles
• special cutting edge for the desired cutting shape• induction-hardened cutting 63–65 HR for a very
long lifespan• opening of the tips limited to 5 mm, preventing
your hand from tiring
• special stop system preventing the cutters from overlapping
• Precision joints for smooth opening and closing• Good price/performance ratio The pliers are made from a cold drawn steel section and are not forged. The special tool steel is manu-factured using a unique Swiss process. You will fi nd our full range of EREM electronic pli-ers in the Toolshop at www.brw.ch when you enter “EREM” in the quick search fi eld.
New to our range: the Wera bit set, BRW 437 615, with 1/4” C 6.3 Allen key, in plastic box with quick-change mount and 29 bits including Allen key, Phil-lips, Pozidriv, fl at blade, Torx® and Torx® torsion blades. The promotion price of CHF 36.− (instead of CHF 73.−) is valid until 30.04.2011. For more Wera products, order our current Pole Position brochure see reference number 31.08.
Wera bit set promotion
The new hydraulic machine lifter FUTURO, BRW 554 041, lifts heavy loads easily, quickly and safely. Lifts with head or foot, reversible lifting claw, rotat-able radial arm base, removable pumping lever and folding carrying handle. Painted RAL 1023 yellow. Type NTG 30: safe working load 3 tons, price CHF 368.–; Type NTG 80: safe working load 8 tons, price CHF 482.–.
Effortless lifting!
Hanhart guarantees innovative technology and at-tractive product benefi ts in time measurement. To-day’s most important stopwatch manufacturer for mechanical stopwatches leaves nothing to be de-sired. Whether for sport or for industry, our stop-watches can be used in many fi elds. Special models are available upon request. You will fi nd our wide range of analogue and digital stopwatches in the Toolshop at www.brw.ch / BRW 170 130–170 430.
Stopwatches by Hanhart
In our complete Toolbook 17 catalogue (www.brw.ch) we are offering you under BRW 109 397 and BRW 109 412 the new FUTURO BASE LINE workshop callipers: the universal version with large, easy to read LCD dis-play, ON/OFF function, changeover between mm and inches, etc. For the dimensions 200 mm and 300 mm, models with and without fi ne adjustment are avail-able. All models come with a calibration certifi cate and are available from stock. Order today, use them tomorrow!
The notorious workshop assistant...
Azurea plug gauges with square ends and inter-changeable steel bodies in proven Swiss quality are available individually or as sets. Plug gauges are available up to Ø 20.00 mm in increments of 0.01 mm with an accuracy of 0.0004 mm (up to Ø 5 mm from stock). Other increments are available upon request. You will fi nd these outstanding products in our Toolshop at www.brw.ch / BRW 164 100–164 120.
Uncompromising precision
Benzing plan tables (www.brw.ch, BRW 127 360–127 450) have been in Brütsch/Rüegger’s range of tools for many years. Their robust construction and high quality production makes them ideal plan ta-bles, particularly for precise measurements. We of-fer ceramic and steel tabletops, in circular, rectan-gular or square versions. A helper you can trust. We are happy to advise you: [email protected] / [email protected], Tel. +41 44 736 63 63.
BENZING - proven over the years
With the MECMESIN TORNADO torque measuring device, BRW 172 410 (www.brw.ch), you can simply and accurately measure the torque when removing or tightening screw caps. The construction of these appliances from MECMESIN is very robust. They are IP54 protected and have an accuracy of ± 0.5% of the full measuring range. They were developed specially for testing screw caps on bottles. MECME-SIN products are used in a wide variety of industry sectors and have an excellent reputation world-wide. Brütsch/Rüegger tools is MECMESIN’s offi cial representative in Switzerland and would be happy to advise you on specifi c issues and measurement problems. Your contact: [email protected].
Screw cap testing –as easy as abc
The user-friendly IMBUS plug-in module system from IBR (www.brw.ch), BRW 154 735, opens a wealth of opportunities for connecting your digital measuring equipment to a PC by cable. Depending on the chosen module, you can connect a range of measuring equipment, such as measuring sensors, callipers, micrometer gauges, altimeters, roughness measuring devices, etc. Take note - measuring equipment from different manufacturers may come with different interface protocols. If necessary, we can program special interface drivers. With the help of the IBREXDLL software, BRW 154 745, you can import and analyze your measurement data direct-ly in MS EXCEL. Further information from: [email protected] or [email protected].
A worthwhile connection
Technische Information TI-D.016 [DE]Führungssäulen-Führungsbuchsen-Auswahlmatrix
Führungssäulen
ECO-Line
2021.29.
202.29.
202.31.
Rz2.5
h4-0.002
-0.007
ÑÑ
Ñl
ll
ll
ll
ll
ll
Führungssäulen
für
Großw
erkzeuge
2022.12.
2022.13.
2022.15.
2022.16.
2022.17.
2022.19.
2022.29.
Rz4
f6-0.025
-0.041
ÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñl
ll
ll
Führungssäulen
nach
CNOMO
2022.16.45.
Rz4
-0.010
-0.025
ÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñl
ll
ll
Führungssäulen
nach
AFN
OR
2022.25.
Rz4
h50
-0.011
ÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñl
ll
ll
Führungssäulen
mit
Mittenbund
2020.62.
202.60.
Rz1
.10
0-0.002
l1
l1
l1
Rz1
.20
-0.002
-0.004
l1
l1
l1
Rz1
.30
-0.004
-0.007
l1
l1
l1
Führungssäulen
mit
Mittenbund
2020.63.
2020.64.
Rz1
h30
-0.004
l1
l1
l1
Führungssäulen
nach
DIN
9825
Führungssäulen
zum
Anschrauben
Wechsel-Fürhungs-
säulen
202.17.
2021.50.
202.19.
2021.58.
202.21.
2021.44.
202.22.
2021.46.
202.23.
202.55.
202.24.
Rz1
.10
0-0.002
l1
l1
l1
l1
l1
l1
Rz1
.20
-0.002
-0.004
l1
l1
l1
l1
l1
l1
Rz1
.30
-0.004
-0.007
l1
l1
l1
l1
l1
l1
Führun
gssäulen
Oberflächen-qualität
Toleranz-bereich
Toleranzenfür ø40
-0.006-0.008
-0.008-0.010
-0.010-0.013
+0.014+0.010
+0.018+0.014
+0.024+0.018
+0.016+0.003
+0.015+0.004
+0.011+0.003
Toleranz-bereich
.10
.20
.30
.10
.20
.30
H6
IT5
H5
Ober-flächen-qualität
Rz1
Führungsbuchsen2061.44. 2081.44.206.49. 2081.45.2061.47. 2081.46.2081.67. 2081.47.2091.67. 2081.49.2091.44. 210.44.2091.45. 210.45.2091.46. 210.46.2031.41. 2031.42.2031.44.
2031.31. 2081.31.2031.34. 2081.32.2031.38. 2081.33.2051.32. 2081.34.2091.31. 2081.35.2091.32. 210.31.2091.34. 210.34.
210.35.
Kugelführungsbuchsen
Säulenblöcke mit Kugelfüh-rungsbuchsen
FRANKEN: new, powerful tools for demanding processesFranken tools are invariably a good choice for de-manding processing jobs.Brütsch/Rüegger Tools has considerably extended their range of Franken products and brought it up to date.High performance roughing cutters without (BRW 221 870) and with (BRW 221 875) interior cooling are particularly suitable for use in mechanical engi-neering. The Enorm mill for universal use, with inte-rior cooling, is available as a shaft cutter (BRW 221 160) and as a torus cutter (BRW 221 150). The universally stable ball cutter (BRW 221 600) is avail-able in diameters from 0.2 mm upwards.The multi-cut VHM carbide cutter (BRW 221 710) enables to you to achieve grinding quality. HSC cut-ters with the VHM carbide ball cutter (BRW
221 765) and the VHM torus carbide cutter (BRW 221 730) reduce polishing costs. The VHM carbide ball cutter (BRW 221 770) and the VHM torus car-bide cutter (BRW 221 745) are particularly suitable for milling with protruding lengths up to 12 x d.Cutting speeds in the information sheets will also help you when using these new tools.Take a look at our extended range. It is worthwhile! Profi t from a 20% discount up until 30.11.2010.Our technicians will be pleased to advise you – also on-site. Phone +41 44 736 63 63.
The brand new Magafor Bi-Face forward and re-verse deburrer is the ideal tool for effi cient deburr-ing. These deburrers are available from stock in the 90° mini version (BRW 224 130), the 90° degree standard version (BRW 224 135) and the 60° stan-dard version (BRW 224 140). All three versions are available uncoated or with Hard’X coating.Try this tool for yourself during our extended 25% introductory promotion until 30.11.2010.
Effi cient deburring – Extended promotion
Improve tool durability –an easy achievement through better cooling and lubrication. The REGO-FIX type KS/ER cooling disc (BRW 339 240) features a peripheral coolant supply. This results in better chip removal and therefore noticeably greater durability. The universal cooling disc is compatible with all REGO-FIX collet chucks (BRW 339 000 and BRW 339 040) as well as the cor-responding clamping nuts (BRW 339 200).These are available from stock at BRW as usual.
The DIXI 4007 carbide reamer (BRW 284 080) allows you to produce all tolerances accurately. The reamer with left-hand rifl ing and a right-hand cut is available in 120 sizes, in diameters from 0.48 mm to 12.02 mm and with tolerances of 0/0.003 mm. With interior cooling from a diameter of 2.97 mm upwards.Get an overview at www.brw.ch.
Dixi VHM machine reamers
The new solinos single clamp for small parts from Gressel (BRW 413 370) is an ideal and cost-effective production solution. The solinos reveals its strengths whether used as a multi-point clamping system, on palette changers or to clamp tombstones. The com-pact, lightweight design (approx. 5.5 kg) with a relatively large clamping range of 0–156 mm (with VS jaw) and the high clamping force of up to 20 kN leaves little to be desired.
An ideal solution for your production
Brütsch / Rüegger Tools Ltd.P.O. Box | CH-8010 ZurichPhone +41 44 736 63 63 | Fax +41 44 736 63 00www.brw.ch | [email protected]
Personal Protective EquipmentAssembly Technology Standard PartsMeasurement Technology Production Technology
Brütsch / Rüegger Tools Ltd.P.O. Box | CH-8010 ZurichPhone +41 44 736 63 63 | Fax +41 44 736 63 00www.brw.ch | [email protected]
You only have two eyes and so you should pro-tect them. The new EKASTU safety goggles fea-ture a modern, sporty design. A large fi eld of vision offers all-round protection for your eyes. The profi led nosepiece, pleasantly soft earpiec-es and the low weight assure a high level of wearer comfort.The EKASTU safety goggles (BRW 531 111) are available in clear and grey for CHF 11.–.
EKASTU safety goggles
Ideal for installers or anyone who does not have access to soap and water. STOKO cleaning cloths will clean your hands without water, even in case of tough dirt. The cleaning cloths (BRW 537 285) are available in bags of 10 sheets or handy buckets of 70 sheets. You will fi nd a full range of skin protection products offered by Brütsch/Rüegger Tools at www.brw.ch.
Hand cleaning on the road
Hearing protection that fi ts!
Hearing protection that does not fi t causes pressure and pain in the ear, counteracting reg-ular use. In many cases, the result is that hearing protection is not worn at all and one simply takes noise in stride without being aware of the consequences of excessive sound exposure. Hearing damage is often irreparable and can-not be reversed! Jrenum is hearing protection that is customised to your ears. As the images show, your hearing protection is made to measure based on a cast of your ear. This level of customisation ensures that your hearing protection fi ts your ears per-fectly, avoiding any unpleasant pressure. Expe-rience has shown that Jrenum hearing protec-
tion users don’t even notice the “ear plug” after wearing it for a while. We at Brütsch/Rüegger Tools consider it especially important that the entire process (from consultation to delivery) is handled by a true professional! This is why we come to you with the manufacturer and evalu-ate your hearing protection needs, customised to your company and your ears – because safety is also a matter of trust. Give us a call – our specialists Marc Hugelshofer, 044 736 64 48, and Domenico Iapello, 044 736 64 88, will be glad to help you.
PUMA Safety ShoesSafety footwear by PUMA Safety Shoes features an appealing modern and sporty design. The plastic cap and fl exible puncture protection as-sure all-round safety for your feet. Breathable textiles maintain a pleasant climate during the entire period of use. The safety shoe (BRW 534 002) is available in sizes 39–48 from inventory at Brütsch/Rüegger Tools – for only CHF 123.–.
The uvex u-fi t nitrile features an outstanding fi t and is the perfect choice for tasks that require manual dexterity and mechanical skills. The u-fi t is especially popular for fi ne assembly. Fea-tures appreciated by the wearer include charac-teristics such as a secure grip, optimum fi t and high strength. The u-fi t disposable protective gloves (BRW 530 415) are now available at the promotional price of CHF 12.90.
uvex u-fi t disposable protective gloves
New: FIBRO heavy duty pneumatic springs
The “new” standard heavy duty pneumatic springs are designed specially to meet the new imperatives in sheet metal processing (including, for example, high-strength sheet steel). They combine the greater spring forces of the BRW 865 055 POWER LINE pneu-matic springs with the outside dimensions and strokes of the standard BRW 865 050 springs. Properties:• spring forces starting at 1000 daN up to 9500 daN,
with strokes of up to 300 mm• standardized dimensions according to ISO-VDI-
CNOMO• unique safety features of FIBRO gas springs:– safety piston rod– overpressure protection - overstroke protection• the springs can be interconnected quite simply via
the lateral gas fi lling connection
• great fi xing fl exibility, from the top mounting and lower fi xing grooves, together with the tapped bores in the spring base
• optional gas connection in the spring base for hose compound or composite panel connection
For more information, please order the documenta-tion under reference number 03.08.You will fi nd our large range of FIBRO pneumatic springs at www.brw.ch – Standard parts – Spring ele-ments – Pneumatic springs
In our summer promotion until 31.08.10, we are also offering attractive sets at top prices. Two ex-amples: BRW 860 200, sets with 382 or 404 NBR, FPM or EPDM O-rings, metric or imperial, starting at CHF 53.–, BRW 861 340, set with 577 retaining rings DIN 471/DIN 472 for shafts or bores for CHF 233.–.Promotion brochure available under reference number 41.08.
Sets summer promotion
Quality that speaks for itself.Tempered couplings from Brütsch/Rüegger Tools are renowned for their quality and reliability! Made of brass with FKM O-rings, these couplings are de-signed for operating pressures of up to 20 bar and temperatures of up to 200°C (standard couplings) or 180°C (Safe Lock™ couplings). You will fi nd all H and D type couplings in the Normbook Edition 3 starting on page 130 or in our Toolshop at www.brw.ch – Advanced search - Standard parts – Cooling and heating elements.
When the design makes the installation of conven-tional ejectors impossible or when you need to eject thin-walled injection-moulded parts, we have the ideal solution for you: Static or dynamic pneumatic ejectors are attractive due to their extremely space-saving design and their large ejector end face. Both of these high quality products, BRW 837 520 and BRW 837 540, can be supplied from stock!
Top product: Pneumatic ejectors
As the only provider of FIBRO guide elements, we give you the opportunity to decide on the guide play of sliding guides or the camber of ball tracks your-self. Pairing classifi cation gives you the freedom to match guide elements precisely to your needs and in this way create the ideal conditions for best quality. You can download our “Guide columns – guide sleeves – selection matrix” brochure at www.brw.ch/Toolnews/Downloads Publications/Brochures.
Defi ne the pairing yourself
New PFERD grinding segmentsThe PFERD grinding segments, BRW 482 470, are outstanding for machining sand forms and sand cores, for rectifying and reworking junctions and mould release. Their wedge shape makes them ide-al for working in confi ned spaces as well as on large areas. Available types: length 235, grain 46, width 32/5 mm and length 246 mm, grain 46, width 42/4 mm. CHF 8.05 each.
New L-Boxx assortment case, BRW 548 160 (empty) or L-Boxx small parts case, BRW 548 170, with insert trays, in various versions. For safe stowing of power tools and small parts. With carrying handle and side grips. With a click mechanism to interconnect the boxes; for heavy loads. Joined boxes can be carried or moved easily by gripping the topmost one; the lid can take a load of up to 100 kg. More in our BOSCH brochure, reference 32.08.
Tool and service chest in one!
EREM – Swiss made
EREM electronic pliers made from high alloy steel, representing the very best Switzerland can pro-duce. The advantages: • replaceable foam handles, proof against electro-
static discharges• invisible spring providing gentle and constant
tension guarantees more than 1 million closing cycles
• special cutting edge for the desired cutting shape• induction-hardened cutting 63–65 HR for a very
long lifespan• opening of the tips limited to 5 mm, preventing
your hand from tiring
• special stop system preventing the cutters from overlapping
• Precision joints for smooth opening and closing• Good price/performance ratio The pliers are made from a cold drawn steel section and are not forged. The special tool steel is manu-factured using a unique Swiss process. You will fi nd our full range of EREM electronic pli-ers in the Toolshop at www.brw.ch when you enter “EREM” in the quick search fi eld.
New to our range: the Wera bit set, BRW 437 615, with 1/4” C 6.3 Allen key, in plastic box with quick-change mount and 29 bits including Allen key, Phil-lips, Pozidriv, fl at blade, Torx® and Torx® torsion blades. The promotion price of CHF 36.− (instead of CHF 73.−) is valid until 30.04.2011. For more Wera products, order our current Pole Position brochure see reference number 31.08.
Wera bit set promotion
The new hydraulic machine lifter FUTURO, BRW 554 041, lifts heavy loads easily, quickly and safely. Lifts with head or foot, reversible lifting claw, rotat-able radial arm base, removable pumping lever and folding carrying handle. Painted RAL 1023 yellow. Type NTG 30: safe working load 3 tons, price CHF 368.–; Type NTG 80: safe working load 8 tons, price CHF 482.–.
Effortless lifting!
Hanhart guarantees innovative technology and at-tractive product benefi ts in time measurement. To-day’s most important stopwatch manufacturer for mechanical stopwatches leaves nothing to be de-sired. Whether for sport or for industry, our stop-watches can be used in many fi elds. Special models are available upon request. You will fi nd our wide range of analogue and digital stopwatches in the Toolshop at www.brw.ch / BRW 170 130–170 430.
Stopwatches by Hanhart
In our complete Toolbook 17 catalogue (www.brw.ch) we are offering you under BRW 109 397 and BRW 109 412 the new FUTURO BASE LINE workshop callipers: the universal version with large, easy to read LCD dis-play, ON/OFF function, changeover between mm and inches, etc. For the dimensions 200 mm and 300 mm, models with and without fi ne adjustment are avail-able. All models come with a calibration certifi cate and are available from stock. Order today, use them tomorrow!
The notorious workshop assistant...
Azurea plug gauges with square ends and inter-changeable steel bodies in proven Swiss quality are available individually or as sets. Plug gauges are available up to Ø 20.00 mm in increments of 0.01 mm with an accuracy of 0.0004 mm (up to Ø 5 mm from stock). Other increments are available upon request. You will fi nd these outstanding products in our Toolshop at www.brw.ch / BRW 164 100–164 120.
Uncompromising precision
Benzing plan tables (www.brw.ch, BRW 127 360–127 450) have been in Brütsch/Rüegger’s range of tools for many years. Their robust construction and high quality production makes them ideal plan ta-bles, particularly for precise measurements. We of-fer ceramic and steel tabletops, in circular, rectan-gular or square versions. A helper you can trust. We are happy to advise you: [email protected] / [email protected], Tel. +41 44 736 63 63.
BENZING - proven over the years
With the MECMESIN TORNADO torque measuring device, BRW 172 410 (www.brw.ch), you can simply and accurately measure the torque when removing or tightening screw caps. The construction of these appliances from MECMESIN is very robust. They are IP54 protected and have an accuracy of ± 0.5% of the full measuring range. They were developed specially for testing screw caps on bottles. MECME-SIN products are used in a wide variety of industry sectors and have an excellent reputation world-wide. Brütsch/Rüegger tools is MECMESIN’s offi cial representative in Switzerland and would be happy to advise you on specifi c issues and measurement problems. Your contact: [email protected].
Screw cap testing –as easy as abc
The user-friendly IMBUS plug-in module system from IBR (www.brw.ch), BRW 154 735, opens a wealth of opportunities for connecting your digital measuring equipment to a PC by cable. Depending on the chosen module, you can connect a range of measuring equipment, such as measuring sensors, callipers, micrometer gauges, altimeters, roughness measuring devices, etc. Take note - measuring equipment from different manufacturers may come with different interface protocols. If necessary, we can program special interface drivers. With the help of the IBREXDLL software, BRW 154 745, you can import and analyze your measurement data direct-ly in MS EXCEL. Further information from: [email protected] or [email protected].
A worthwhile connection
Technische Information TI-D.016 [DE]Führungssäulen-Führungsbuchsen-Auswahlmatrix
Führungssäulen
ECO-Line
2021.29.
202.29.
202.31.
Rz2.5
h4-0.002
-0.007
ÑÑ
Ñl
ll
ll
ll
ll
ll
Führungssäulen
für
Großw
erkzeuge
2022.12.
2022.13.
2022.15.
2022.16.
2022.17.
2022.19.
2022.29.
Rz4
f6-0.025
-0.041
ÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñl
ll
ll
Führungssäulen
nach
CNOMO
2022.16.45.
Rz4
-0.010
-0.025
ÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñl
ll
ll
Führungssäulen
nach
AFN
OR
2022.25.
Rz4
h50
-0.011
ÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñl
ll
ll
Führungssäulen
mit
Mittenbund
2020.62.
202.60.
Rz1
.10
0-0.002
l1
l1
l1
Rz1
.20
-0.002
-0.004
l1
l1
l1
Rz1
.30
-0.004
-0.007
l1
l1
l1
Führungssäulen
mit
Mittenbund
2020.63.
2020.64.
Rz1
h30
-0.004
l1
l1
l1
Führungssäulen
nach
DIN
9825
Führungssäulen
zum
Anschrauben
Wechsel-Fürhungs-
säulen
202.17.
2021.50.
202.19.
2021.58.
202.21.
2021.44.
202.22.
2021.46.
202.23.
202.55.
202.24.
Rz1
.10
0-0.002
l1
l1
l1
l1
l1
l1
Rz1
.20
-0.002
-0.004
l1
l1
l1
l1
l1
l1
Rz1
.30
-0.004
-0.007
l1
l1
l1
l1
l1
l1
Führun
gssäulen
Oberflächen-qualität
Toleranz-bereich
Toleranzenfür ø40
-0.006-0.008
-0.008-0.010
-0.010-0.013
+0.014+0.010
+0.018+0.014
+0.024+0.018
+0.016+0.003
+0.015+0.004
+0.011+0.003
Toleranz-bereich
.10
.20
.30
.10
.20
.30
H6
IT5
H5
Ober-flächen-qualität
Rz1
Führungsbuchsen2061.44. 2081.44.206.49. 2081.45.2061.47. 2081.46.2081.67. 2081.47.2091.67. 2081.49.2091.44. 210.44.2091.45. 210.45.2091.46. 210.46.2031.41. 2031.42.2031.44.
2031.31. 2081.31.2031.34. 2081.32.2031.38. 2081.33.2051.32. 2081.34.2091.31. 2081.35.2091.32. 210.31.2091.34. 210.34.
210.35.
Kugelführungsbuchsen
Säulenblöcke mit Kugelfüh-rungsbuchsen
FRANKEN: new, powerful tools for demanding processesFranken tools are invariably a good choice for de-manding processing jobs.Brütsch/Rüegger Tools has considerably extended their range of Franken products and brought it up to date.High performance roughing cutters without (BRW 221 870) and with (BRW 221 875) interior cooling are particularly suitable for use in mechanical engi-neering. The Enorm mill for universal use, with inte-rior cooling, is available as a shaft cutter (BRW 221 160) and as a torus cutter (BRW 221 150). The universally stable ball cutter (BRW 221 600) is avail-able in diameters from 0.2 mm upwards.The multi-cut VHM carbide cutter (BRW 221 710) enables to you to achieve grinding quality. HSC cut-ters with the VHM carbide ball cutter (BRW
221 765) and the VHM torus carbide cutter (BRW 221 730) reduce polishing costs. The VHM carbide ball cutter (BRW 221 770) and the VHM torus car-bide cutter (BRW 221 745) are particularly suitable for milling with protruding lengths up to 12 x d.Cutting speeds in the information sheets will also help you when using these new tools.Take a look at our extended range. It is worthwhile! Profi t from a 20% discount up until 30.11.2010.Our technicians will be pleased to advise you – also on-site. Phone +41 44 736 63 63.
The brand new Magafor Bi-Face forward and re-verse deburrer is the ideal tool for effi cient deburr-ing. These deburrers are available from stock in the 90° mini version (BRW 224 130), the 90° degree standard version (BRW 224 135) and the 60° stan-dard version (BRW 224 140). All three versions are available uncoated or with Hard’X coating.Try this tool for yourself during our extended 25% introductory promotion until 30.11.2010.
Effi cient deburring – Extended promotion
Improve tool durability –an easy achievement through better cooling and lubrication. The REGO-FIX type KS/ER cooling disc (BRW 339 240) features a peripheral coolant supply. This results in better chip removal and therefore noticeably greater durability. The universal cooling disc is compatible with all REGO-FIX collet chucks (BRW 339 000 and BRW 339 040) as well as the cor-responding clamping nuts (BRW 339 200).These are available from stock at BRW as usual.
The DIXI 4007 carbide reamer (BRW 284 080) allows you to produce all tolerances accurately. The reamer with left-hand rifl ing and a right-hand cut is available in 120 sizes, in diameters from 0.48 mm to 12.02 mm and with tolerances of 0/0.003 mm. With interior cooling from a diameter of 2.97 mm upwards.Get an overview at www.brw.ch.
Dixi VHM machine reamers
The new solinos single clamp for small parts from Gressel (BRW 413 370) is an ideal and cost-effective production solution. The solinos reveals its strengths whether used as a multi-point clamping system, on palette changers or to clamp tombstones. The com-pact, lightweight design (approx. 5.5 kg) with a relatively large clamping range of 0–156 mm (with VS jaw) and the high clamping force of up to 20 kN leaves little to be desired.
An ideal solution for your production
Brütsch / Rüegger Tools Ltd.P.O. Box | CH-8010 ZurichPhone +41 44 736 63 63 | Fax +41 44 736 63 00www.brw.ch | [email protected]
Personal Protective EquipmentAssembly Technology Standard PartsMeasurement Technology Production Technology
Brütsch / Rüegger Tools Ltd.P.O. Box | CH-8010 ZurichPhone +41 44 736 63 63 | Fax +41 44 736 63 00www.brw.ch | [email protected]
You only have two eyes and so you should pro-tect them. The new EKASTU safety goggles fea-ture a modern, sporty design. A large fi eld of vision offers all-round protection for your eyes. The profi led nosepiece, pleasantly soft earpiec-es and the low weight assure a high level of wearer comfort.The EKASTU safety goggles (BRW 531 111) are available in clear and grey for CHF 11.–.
EKASTU safety goggles
Ideal for installers or anyone who does not have access to soap and water. STOKO cleaning cloths will clean your hands without water, even in case of tough dirt. The cleaning cloths (BRW 537 285) are available in bags of 10 sheets or handy buckets of 70 sheets. You will fi nd a full range of skin protection products offered by Brütsch/Rüegger Tools at www.brw.ch.
Hand cleaning on the road
Hearing protection that fi ts!
Hearing protection that does not fi t causes pressure and pain in the ear, counteracting reg-ular use. In many cases, the result is that hearing protection is not worn at all and one simply takes noise in stride without being aware of the consequences of excessive sound exposure. Hearing damage is often irreparable and can-not be reversed! Jrenum is hearing protection that is customised to your ears. As the images show, your hearing protection is made to measure based on a cast of your ear. This level of customisation ensures that your hearing protection fi ts your ears per-fectly, avoiding any unpleasant pressure. Expe-rience has shown that Jrenum hearing protec-
tion users don’t even notice the “ear plug” after wearing it for a while. We at Brütsch/Rüegger Tools consider it especially important that the entire process (from consultation to delivery) is handled by a true professional! This is why we come to you with the manufacturer and evalu-ate your hearing protection needs, customised to your company and your ears – because safety is also a matter of trust. Give us a call – our specialists Marc Hugelshofer, 044 736 64 48, and Domenico Iapello, 044 736 64 88, will be glad to help you.
PUMA Safety ShoesSafety footwear by PUMA Safety Shoes features an appealing modern and sporty design. The plastic cap and fl exible puncture protection as-sure all-round safety for your feet. Breathable textiles maintain a pleasant climate during the entire period of use. The safety shoe (BRW 534 002) is available in sizes 39–48 from inventory at Brütsch/Rüegger Tools – for only CHF 123.–.
The uvex u-fi t nitrile features an outstanding fi t and is the perfect choice for tasks that require manual dexterity and mechanical skills. The u-fi t is especially popular for fi ne assembly. Fea-tures appreciated by the wearer include charac-teristics such as a secure grip, optimum fi t and high strength. The u-fi t disposable protective gloves (BRW 530 415) are now available at the promotional price of CHF 12.90.
uvex u-fi t disposable protective gloves
New: FIBRO heavy duty pneumatic springs
The “new” standard heavy duty pneumatic springs are designed specially to meet the new imperatives in sheet metal processing (including, for example, high-strength sheet steel). They combine the greater spring forces of the BRW 865 055 POWER LINE pneu-matic springs with the outside dimensions and strokes of the standard BRW 865 050 springs. Properties:• spring forces starting at 1000 daN up to 9500 daN,
with strokes of up to 300 mm• standardized dimensions according to ISO-VDI-
CNOMO• unique safety features of FIBRO gas springs:– safety piston rod– overpressure protection - overstroke protection• the springs can be interconnected quite simply via
the lateral gas fi lling connection
• great fi xing fl exibility, from the top mounting and lower fi xing grooves, together with the tapped bores in the spring base
• optional gas connection in the spring base for hose compound or composite panel connection
For more information, please order the documenta-tion under reference number 03.08.You will fi nd our large range of FIBRO pneumatic springs at www.brw.ch – Standard parts – Spring ele-ments – Pneumatic springs
In our summer promotion until 31.08.10, we are also offering attractive sets at top prices. Two ex-amples: BRW 860 200, sets with 382 or 404 NBR, FPM or EPDM O-rings, metric or imperial, starting at CHF 53.–, BRW 861 340, set with 577 retaining rings DIN 471/DIN 472 for shafts or bores for CHF 233.–.Promotion brochure available under reference number 41.08.
Sets summer promotion
Quality that speaks for itself.Tempered couplings from Brütsch/Rüegger Tools are renowned for their quality and reliability! Made of brass with FKM O-rings, these couplings are de-signed for operating pressures of up to 20 bar and temperatures of up to 200°C (standard couplings) or 180°C (Safe Lock™ couplings). You will fi nd all H and D type couplings in the Normbook Edition 3 starting on page 130 or in our Toolshop at www.brw.ch – Advanced search - Standard parts – Cooling and heating elements.
When the design makes the installation of conven-tional ejectors impossible or when you need to eject thin-walled injection-moulded parts, we have the ideal solution for you: Static or dynamic pneumatic ejectors are attractive due to their extremely space-saving design and their large ejector end face. Both of these high quality products, BRW 837 520 and BRW 837 540, can be supplied from stock!
Top product: Pneumatic ejectors
As the only provider of FIBRO guide elements, we give you the opportunity to decide on the guide play of sliding guides or the camber of ball tracks your-self. Pairing classifi cation gives you the freedom to match guide elements precisely to your needs and in this way create the ideal conditions for best quality. You can download our “Guide columns – guide sleeves – selection matrix” brochure at www.brw.ch/Toolnews/Downloads Publications/Brochures.
Defi ne the pairing yourself
New PFERD grinding segmentsThe PFERD grinding segments, BRW 482 470, are outstanding for machining sand forms and sand cores, for rectifying and reworking junctions and mould release. Their wedge shape makes them ide-al for working in confi ned spaces as well as on large areas. Available types: length 235, grain 46, width 32/5 mm and length 246 mm, grain 46, width 42/4 mm. CHF 8.05 each.
New L-Boxx assortment case, BRW 548 160 (empty) or L-Boxx small parts case, BRW 548 170, with insert trays, in various versions. For safe stowing of power tools and small parts. With carrying handle and side grips. With a click mechanism to interconnect the boxes; for heavy loads. Joined boxes can be carried or moved easily by gripping the topmost one; the lid can take a load of up to 100 kg. More in our BOSCH brochure, reference 32.08.
Tool and service chest in one!
EREM – Swiss made
EREM electronic pliers made from high alloy steel, representing the very best Switzerland can pro-duce. The advantages: • replaceable foam handles, proof against electro-
static discharges• invisible spring providing gentle and constant
tension guarantees more than 1 million closing cycles
• special cutting edge for the desired cutting shape• induction-hardened cutting 63–65 HR for a very
long lifespan• opening of the tips limited to 5 mm, preventing
your hand from tiring
• special stop system preventing the cutters from overlapping
• Precision joints for smooth opening and closing• Good price/performance ratio The pliers are made from a cold drawn steel section and are not forged. The special tool steel is manu-factured using a unique Swiss process. You will fi nd our full range of EREM electronic pli-ers in the Toolshop at www.brw.ch when you enter “EREM” in the quick search fi eld.
New to our range: the Wera bit set, BRW 437 615, with 1/4” C 6.3 Allen key, in plastic box with quick-change mount and 29 bits including Allen key, Phil-lips, Pozidriv, fl at blade, Torx® and Torx® torsion blades. The promotion price of CHF 36.− (instead of CHF 73.−) is valid until 30.04.2011. For more Wera products, order our current Pole Position brochure see reference number 31.08.
Wera bit set promotion
The new hydraulic machine lifter FUTURO, BRW 554 041, lifts heavy loads easily, quickly and safely. Lifts with head or foot, reversible lifting claw, rotat-able radial arm base, removable pumping lever and folding carrying handle. Painted RAL 1023 yellow. Type NTG 30: safe working load 3 tons, price CHF 368.–; Type NTG 80: safe working load 8 tons, price CHF 482.–.
Effortless lifting!
Hanhart guarantees innovative technology and at-tractive product benefi ts in time measurement. To-day’s most important stopwatch manufacturer for mechanical stopwatches leaves nothing to be de-sired. Whether for sport or for industry, our stop-watches can be used in many fi elds. Special models are available upon request. You will fi nd our wide range of analogue and digital stopwatches in the Toolshop at www.brw.ch / BRW 170 130–170 430.
Stopwatches by Hanhart
In our complete Toolbook 17 catalogue (www.brw.ch) we are offering you under BRW 109 397 and BRW 109 412 the new FUTURO BASE LINE workshop callipers: the universal version with large, easy to read LCD dis-play, ON/OFF function, changeover between mm and inches, etc. For the dimensions 200 mm and 300 mm, models with and without fi ne adjustment are avail-able. All models come with a calibration certifi cate and are available from stock. Order today, use them tomorrow!
The notorious workshop assistant...
Azurea plug gauges with square ends and inter-changeable steel bodies in proven Swiss quality are available individually or as sets. Plug gauges are available up to Ø 20.00 mm in increments of 0.01 mm with an accuracy of 0.0004 mm (up to Ø 5 mm from stock). Other increments are available upon request. You will fi nd these outstanding products in our Toolshop at www.brw.ch / BRW 164 100–164 120.
Uncompromising precision
Benzing plan tables (www.brw.ch, BRW 127 360–127 450) have been in Brütsch/Rüegger’s range of tools for many years. Their robust construction and high quality production makes them ideal plan ta-bles, particularly for precise measurements. We of-fer ceramic and steel tabletops, in circular, rectan-gular or square versions. A helper you can trust. We are happy to advise you: [email protected] / [email protected], Tel. +41 44 736 63 63.
BENZING - proven over the years
With the MECMESIN TORNADO torque measuring device, BRW 172 410 (www.brw.ch), you can simply and accurately measure the torque when removing or tightening screw caps. The construction of these appliances from MECMESIN is very robust. They are IP54 protected and have an accuracy of ± 0.5% of the full measuring range. They were developed specially for testing screw caps on bottles. MECME-SIN products are used in a wide variety of industry sectors and have an excellent reputation world-wide. Brütsch/Rüegger tools is MECMESIN’s offi cial representative in Switzerland and would be happy to advise you on specifi c issues and measurement problems. Your contact: [email protected].
Screw cap testing –as easy as abc
The user-friendly IMBUS plug-in module system from IBR (www.brw.ch), BRW 154 735, opens a wealth of opportunities for connecting your digital measuring equipment to a PC by cable. Depending on the chosen module, you can connect a range of measuring equipment, such as measuring sensors, callipers, micrometer gauges, altimeters, roughness measuring devices, etc. Take note - measuring equipment from different manufacturers may come with different interface protocols. If necessary, we can program special interface drivers. With the help of the IBREXDLL software, BRW 154 745, you can import and analyze your measurement data direct-ly in MS EXCEL. Further information from: [email protected] or [email protected].
A worthwhile connection
Technische Information TI-D.016 [DE]Führungssäulen-Führungsbuchsen-Auswahlmatrix
Führungssäulen
ECO-Line
2021.29.
202.29.
202.31.
Rz2.5
h4-0.002
-0.007
ÑÑ
Ñl
ll
ll
ll
ll
ll
Führungssäulen
für
Großw
erkzeuge
2022.12.
2022.13.
2022.15.
2022.16.
2022.17.
2022.19.
2022.29.
Rz4
f6-0.025
-0.041
ÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñl
ll
ll
Führungssäulen
nach
CNOMO
2022.16.45.
Rz4
-0.010
-0.025
ÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñl
ll
ll
Führungssäulen
nach
AFN
OR
2022.25.
Rz4
h50
-0.011
ÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñl
ll
ll
Führungssäulen
mit
Mittenbund
2020.62.
202.60.
Rz1
.10
0-0.002
l1
l1
l1
Rz1
.20
-0.002
-0.004
l1
l1
l1
Rz1
.30
-0.004
-0.007
l1
l1
l1
Führungssäulen
mit
Mittenbund
2020.63.
2020.64.
Rz1
h30
-0.004
l1
l1
l1
Führungssäulen
nach
DIN
9825
Führungssäulen
zum
Anschrauben
Wechsel-Fürhungs-
säulen
202.17.
2021.50.
202.19.
2021.58.
202.21.
2021.44.
202.22.
2021.46.
202.23.
202.55.
202.24.
Rz1
.10
0-0.002
l1
l1
l1
l1
l1
l1
Rz1
.20
-0.002
-0.004
l1
l1
l1
l1
l1
l1
Rz1
.30
-0.004
-0.007
l1
l1
l1
l1
l1
l1
Führun
gssäulen
Oberflächen-qualität
Toleranz-bereich
Toleranzenfür ø40
-0.006-0.008
-0.008-0.010
-0.010-0.013
+0.014+0.010
+0.018+0.014
+0.024+0.018
+0.016+0.003
+0.015+0.004
+0.011+0.003
Toleranz-bereich
.10
.20
.30
.10
.20
.30
H6
IT5
H5
Ober-flächen-qualität
Rz1
Führungsbuchsen2061.44. 2081.44.206.49. 2081.45.2061.47. 2081.46.2081.67. 2081.47.2091.67. 2081.49.2091.44. 210.44.2091.45. 210.45.2091.46. 210.46.2031.41. 2031.42.2031.44.
2031.31. 2081.31.2031.34. 2081.32.2031.38. 2081.33.2051.32. 2081.34.2091.31. 2081.35.2091.32. 210.31.2091.34. 210.34.
210.35.
Kugelführungsbuchsen
Säulenblöcke mit Kugelfüh-rungsbuchsen
FRANKEN: new, powerful tools for demanding processesFranken tools are invariably a good choice for de-manding processing jobs.Brütsch/Rüegger Tools has considerably extended their range of Franken products and brought it up to date.High performance roughing cutters without (BRW 221 870) and with (BRW 221 875) interior cooling are particularly suitable for use in mechanical engi-neering. The Enorm mill for universal use, with inte-rior cooling, is available as a shaft cutter (BRW 221 160) and as a torus cutter (BRW 221 150). The universally stable ball cutter (BRW 221 600) is avail-able in diameters from 0.2 mm upwards.The multi-cut VHM carbide cutter (BRW 221 710) enables to you to achieve grinding quality. HSC cut-ters with the VHM carbide ball cutter (BRW
221 765) and the VHM torus carbide cutter (BRW 221 730) reduce polishing costs. The VHM carbide ball cutter (BRW 221 770) and the VHM torus car-bide cutter (BRW 221 745) are particularly suitable for milling with protruding lengths up to 12 x d.Cutting speeds in the information sheets will also help you when using these new tools.Take a look at our extended range. It is worthwhile! Profi t from a 20% discount up until 30.11.2010.Our technicians will be pleased to advise you – also on-site. Phone +41 44 736 63 63.
The brand new Magafor Bi-Face forward and re-verse deburrer is the ideal tool for effi cient deburr-ing. These deburrers are available from stock in the 90° mini version (BRW 224 130), the 90° degree standard version (BRW 224 135) and the 60° stan-dard version (BRW 224 140). All three versions are available uncoated or with Hard’X coating.Try this tool for yourself during our extended 25% introductory promotion until 30.11.2010.
Effi cient deburring – Extended promotion
Improve tool durability –an easy achievement through better cooling and lubrication. The REGO-FIX type KS/ER cooling disc (BRW 339 240) features a peripheral coolant supply. This results in better chip removal and therefore noticeably greater durability. The universal cooling disc is compatible with all REGO-FIX collet chucks (BRW 339 000 and BRW 339 040) as well as the cor-responding clamping nuts (BRW 339 200).These are available from stock at BRW as usual.
The DIXI 4007 carbide reamer (BRW 284 080) allows you to produce all tolerances accurately. The reamer with left-hand rifl ing and a right-hand cut is available in 120 sizes, in diameters from 0.48 mm to 12.02 mm and with tolerances of 0/0.003 mm. With interior cooling from a diameter of 2.97 mm upwards.Get an overview at www.brw.ch.
Dixi VHM machine reamers
The new solinos single clamp for small parts from Gressel (BRW 413 370) is an ideal and cost-effective production solution. The solinos reveals its strengths whether used as a multi-point clamping system, on palette changers or to clamp tombstones. The com-pact, lightweight design (approx. 5.5 kg) with a relatively large clamping range of 0–156 mm (with VS jaw) and the high clamping force of up to 20 kN leaves little to be desired.
An ideal solution for your production
Real funny
Brütsch/Rüegger ToolsPromotional Supplier of the BMW Sauber F1 Team
Last Minute
Contents Pearls of wisdom
In focus
Independent monthly publication for tools and standard partsNumber 444, August 2010
Brütsch / Rüegger Tools Ltd.P.O. Box | CH-8010 ZurichPhone +41 44 736 63 63 | Fax +41 44 736 63 00www.brw.ch | [email protected]
Brütsch / Rüegger Tools Ltd.P.O. Box | CH-8010 ZurichPhone +41 44 736 63 63 | Fax +41 44 736 63 00www.brw.ch | [email protected]
Our partner
Servicebox
Measurement Technology
Production Technology
Assembly Technology
Forum
Standard Parts
Personal Protective Equipment
The new safety goggles by UNICO and EKASTU look more like sports and leisure goggles than safety goggles. Only safety gog-gles that are actually used can also protect your eyes. This is why safety goggles should look as appealing as possible. Benefi t from our introductory promotion! BRW 531 111, EKASTU safety goggles, CHF 11.–instead of CHF 14.30BRW 531 188, UNICO safety goggles, CHF 12.–instead of CHF 14.70
Offer valid until 31 August 2010.
Safety goggle promotion
You can only gain from our current special promotion of EDM electrodes! With one-off special discounts on electrolyte copper and tung-sten copper, we are giving you the opportunity to add to your store of material and save money at the same time. The attached brochure shows you the enormous choice of tubes, multi-channel tubes, tapped electrodes, circular/square/rectangular rods in dif-ferent sizes and plates both materials.At the same time, you will be saving twice at the same time – on material and on processing – it couldn’t be easier! This special offer is valid for three month – the durability of cop-per on the other hand is almost unlimited... Promotional brochure under reference number 42.08.
Special EDM electrode promotion
Wenger pocket knife, BRW 457 782, 20 parts: Fixed blade, wire bender, fl at blade screwdriver, spring-loaded scissors with serrated edge, Phillips screwdriver, multi-function pliers with insu-lation clamp, wire cutters, side cutters, wrench, open jaw wrench, etc. Price CHF 72.–.Wenger multi-function pocket knife, BRW 457 810: 12-part, fi xed serrated blade, combination pliers with wire cutters, metal fi le, hacksaw, Phillips size 3 and fl at blade screwdriver inserts, etc. Supplied in belt pouch. Price CHF 160.–.You will fi nd more new Wenger pocket knives at www.brw.ch, under “Wenger” in the quick search fi eld.
Swiss quality
Surface profi les are as variable as landscape pro-fi les. The Black Forest and the Alps are mountain ranges, which differ not only in their highest peaks but also in the form and width of their valleys. It is equally complex to describe a surface like a moun-tain landscape.For surface roughness measurements, the electri-cal sampling cut method with a mechanical tracing
stylus is assuming a central role. Roughness measuring equipment with a high-precision mounted diamond tip with a radius of 2 µm/60° or 5 µm/90° and a skid is used. Surface param-eters are given in µm. Don’t forget: a human hair has a thickness of 50 µm and a fi ngerprint 4 µm. Contact: [email protected].
...across mountains and valleys?
Further catalogues from Brütsch/Rüegger Tools at a glance Toolbook, Edition 17The big tool catalogue with thecomplete product range on 2800 pages,incl. fi xed price and stock list.Reference number 05.08 Normbook, Edition 3Professional Collection 2010Mould construction and stamping technologyReference number 06.08
SYLVAC µ_PRICES_10Reference number 01.08
Professional tools by Brütsch/RüeggerReference number 02.08
Pneumatic springs, HEAVY DUTY standardOptimised for the latest challenges in sheet metal processingReference number 03.08
FUTURO catalogue, 2010 editionThe new comprehensive catalogue for the exclu-sive Brütsch/Rüegger Tools house brand is here.370 pagesReference number 04.08
A wide range of services The new buildings allow services for industry, small businesses, the retail trades and private customers to be provided under ideal conditions. At the same time, a wide range of business sec-tors is covered: engineering, assembly, prefabri-cation and packaging, carpentry, garden and landscape maintenance, cultivation of organic vegetables and a laundry. A particular service is an external team which - under the supervision of a qualifi ed supervisor - carries out work on-site.
A focus on the mechanical side Work on mechanical parts takes place in the modern, well-equipped mechanical workshop. In addition, tasks from drawing to fi nishing of
MBF foundation: a storybook social companyAnyone who still thinks of social companies as “homes for the handi-capped” in the traditional sense should take a trip to the Swiss can-ton of Aargau. Here, the MBF foun-dation, “a social company for the handicapped in the Fricktal” recently inaugurated its new building: Mod-ern, simple architecture with clean lines, brightly lit workshops and a lavish company cafeteria for the workforce of more than one hun-dred. The MBF foundation is ISO-9001certifi ed and has the BSV-IV quality label. The carpenter’s shop is FSC certifi ed and complies with KPM 15 ISPM 15 directives. The company has the NPO label for management excellence. In short: the MBF foun-dation is a social institution that is available to business as a fully-fl edged market partner.
An extensive catalogue of jobs
In accordance with its charter, the MBF founda-tion offers people with a handicap appropriate jobs, occupation, training and residential place-ments. More than 90 people with a handicap use the residential facilities, a total of around 200 people working in different sections. The range extends from creative workshops for people with a severe handicap to training places for a federal EBA professional test. As a social com-pany recognized by the canton of Aargau, it has to comply with the conditions and directives of the Swiss Care Act. To implement all the de-mands and conditions and still provide a service tailored to the market requires a considerable degree of skill at all levels. To this end, business and group managers have attended supplemen-tary teacher training to add to their professional experience.
parts are carried out by a single source, includ-ing surface processing work by external part-ners. Steel, stainless steel, aluminium, copper, bronze and plastic is processed. Almost all com-mon types of metal processing are on offer, with the machine shop tools spanning the range from CNC machining centres and auto-matic saws down to simple bench drilling ma-chines.
Professionalism in procurement The MBF foundation shows its professionalism in procurement not only in the ordering of tools for everyday needs, where group leaders normally order directly via the www.brw.ch Toolshop. Be-sides minimising the cost of the procurement process, the compatibility of the new equipment and furniture to be purchased for the new build-ing with the existing inventory plays an impor-tant role. This is where Brütsch/Rüegger tools could demonstrate its traditional strengths: as Switzerland’s largest tool specialist – with the largest warehouse in Switzerland – all the neces-sary additions and new installations of Lista cabi-nets, superstructures, drawer storage cabinets, workbenches, wardrobes, etc. could be assem-bled in record time.
The MBF foundation’s portfolio Go to www.stiftung-mbf.ch to get more informa-tion. Or, at reference number 72.08 ask for the practical A5-size brochure (in German), which Modern machines help social companies provide services tailored to the market
Demanding assembly tasks using, for example, presses are also offered
A group leader setting up the CNC machining centre for the next job
Keeping an eye on everything, even for the simpler technical tasks
The spotless wardrobe - equipped by Brütsch/Rüegger Tools with Lista cabinets
sets out the MBF foundation’s complete range of goods and services.
Seminar with the BMW Sauber F1 team in HinwilTuesday 26 October 2010, starting at 1.30 p.m.
Tool management with removal systems and scanner solutions The Tool Box System is a modular system for controlled tool management. It provides tidy and safe tool storage, optimizes storage vol-umes, reduces storage costs, re-orders automati-cally and is available around the clock. The fully integrated scanner solutions are paperless data recording systems using barcodes. You do not need any data management software, since the entire process support system all the way to label printing is integrated in the Toolshop www.brw.ch. During the seminar, we will be showing you both inventory management systems and their opportunities for simultaneously improving quality and reducing costs. Ask for your invita-tion to the seminar quoting reference number 71.08 and enrol today. The charge per partici-pant is CHF 95.−. Applications will be dealt with in the order they are received.
Assembly technology: top performance with serviceThe assembly technology compe-tence centre clearly shows how much the requirements for tool pro-fessionals have changed: technical tool knowledge has become a core competence. Customers are think-ing increasingly in terms of com-plete processes and this is opening up a new tasks for full-range suppli-ers such as Brütsch/Rüegger Tools: tool labelling, fi lling of assembly sets to order, fi tting, servicing and upgrading complete tool sets in as-sembly vehicles, special foam inserts for tool drawers, etc. Brütsch/Rüeg-ger Tools is taking over multiple process steps up to and including the entire process, relieving the cus-tomers of laborious detail and coor-dination tasks.
The concept and how it works
Our customers describe to us all the tasks which their installation engineers carry out. This infor-mation is then used to create a specifi c tool re-quirement profi le. Brütsch/Rüegger Tools assem-bles a complete set of tools. These are ergonomically correct and technically matched to the task, of defi ned quality and in the pre-scribed sizes and weights. It must also be possi-ble to add to the set if it is found in practice that new tools are needed. The overall function is im-portant, so that the installation engineer can work at maximum effi ciency. The tools or brand names that are used to do this are of secondary importance. The concept is “great things in small packages”.
The concept as a processes Outsourcing individual processes and combin-ing them into overall processes with the sup-plier makes sense: instead of expensive orders for individual tools, there is simply one cata-logue number for the set. Details are fi led at Brütsch/Rüegger Tools on Myshop in a purchas-ing list and can be repeated with a single click (www.brw.ch). You hand over servicing, in-spection and fi lling to the Brütsch/Rüegger Tools specialist, so that the technician can con-centrate fully on his work. Your Brütsch/Rüeg-ger Tools contact is responsible for everything else.
The concept for the customer Speed and effi ciency play an important role in the areas of servicing, inspection, cleaning and re-placement of tool sets and the equipment for com-plete assembly vehicles (see picture on title page). At this point, Brütsch/Rüegger Tools can demon-strate one of its strengths: assembly vehicles come directly on to the ramp and the tool sets directly into the picking room, where the content is checked by experts and parts are replaced. The paths are extremely short, the Brütsch/Rüegger Tools technician is familiar with every tool and whips everything into shape. For assembly technol-ogy services, please contact [email protected].
Checking, cleaning or replacing each tool in a assembly tool vehicle
Filling a FUTURO fitter’s tool case
Equipping an assembly case according to the customer’s specification
Filling a tool roll for the machine industry
Organising tools in a toolbox
A guide to concentration
Hartmut Volk, MBA and freelance business publisher, Bad Harzburg
Experience fl ow in realityConcentrated working can be learned. Par-ticularly when your head is bursting and your list of tasks seems never-ending, you should take a deep breath and relax. External peace can be created with a daily time slot when you ensure you are not interrupted. This time is best spent on demanding and diffi cult tasks.However, concentration also needs intelli-gent organization: this includes a task list with set priorities, a weekly plan as well as a to-do list.Anyone who takes this to heart and can focus completely on a problem forgets time and himself, is fully absorbed by what he is doing and experiences so-called fl ow: everything comes together and moves as if by itself. An incomparable feeling!Interested? Request your personal copy (2 pages in German) by quoting reference num-ber 70.08 on www.brw.ch in the Toolnews/Publications section (PDF fi le).
µ_PRICES_10
Schweizer Hersteller von Präzisionsmessinstrumenten seit 1969
VerzeichnisS_Cal PRO 2
S_Cal ONE 2
S_Cal MICRON 3
S_Mike PRO 4-5
Satz S_Mike PRO & S_Cal PRO 5
S_Dial ONE 6
S_Dial S229 7
S_Dial S213 8
S_Dial S233 / S234 8
X_Treme SXTD / SXTH 9
Ultima 9
S_Cal UL III 10
Hi_Cal Satz 11
S_View D50S / D50S PRO 12
S_View D60S PRO 13
S_View D200S 14-15
S_Dial ONE
S_Cal MICRON
D60S PRO
S_Cal PRO
S_Mike PRO
S_Cal ONE
Gültigkeit 31.12.2010
WuWuW susu chhhhhhh
Die Profitoolsvon Brütsch/Rüegger
ich bin einabsoluterprofi!
aber nureiner vonvielen.
Genau.
Gasdruckfedern,Standard ‒HEAVY DUTYFür die neuen Herausforderungen in derBlechbearbeitung optimiert
The 5xD FUTURO VHM spiral bit is now also available from stock (BRW 255 570) with a whistle-notch clamping surface. This makes application easier – in particular on lathes. This tool distin-guishes itself through its concave cutting geometry with point thinning and special bevel as well as the high-quality coating on a TiAlN-TIN base. This makes an unusually broad range of applications in various materials possible.
FUTURO VHM 5xD spiral bits
How convenient.It‛s a leafletfor a glazier.
A worthwhile connectionScrew cap testingUncompromising precisionBENZING – proven over the years
FRANKEN toolsSolinos – the ideal solutionDixi VHM machine reamersFuturo VHM spiral bits
EREM – Swiss madeNew PFERD grinding segmentsTool and service chest all in oneWENGER pocket knives
MBF foundation: the storybook social company with an extensive task catalogue, a wide range of services and professionalism in procurement
FIBRO heavy duty pneumatic springsTempered couplingsSummer promotion setsSpecial promotion – EDM electrodes
Hearing protection that fits!PUMA safety shoesHand cleaning on the moveSafety goggles offer
Brütsch / Rüegger Tools Ltd.P.O. Box | CH-8010 ZurichPhone +41 44 736 63 63 | Fax +41 44 736 63 00www.brw.ch | [email protected]
Personal Protective EquipmentAssembly Technology Standard PartsMeasurement Technology Production Technology
Brütsch / Rüegger Tools Ltd.P.O. Box | CH-8010 ZurichPhone +41 44 736 63 63 | Fax +41 44 736 63 00www.brw.ch | [email protected]
You only have two eyes and so you should pro-tect them. The new EKASTU safety goggles fea-ture a modern, sporty design. A large fi eld of vision offers all-round protection for your eyes. The profi led nosepiece, pleasantly soft earpiec-es and the low weight assure a high level of wearer comfort.The EKASTU safety goggles (BRW 531 111) are available in clear and grey for CHF 11.–.
EKASTU safety goggles
Ideal for installers or anyone who does not have access to soap and water. STOKO cleaning cloths will clean your hands without water, even in case of tough dirt. The cleaning cloths (BRW 537 285) are available in bags of 10 sheets or handy buckets of 70 sheets. You will fi nd a full range of skin protection products offered by Brütsch/Rüegger Tools at www.brw.ch.
Hand cleaning on the road
Hearing protection that fi ts!
Hearing protection that does not fi t causes pressure and pain in the ear, counteracting reg-ular use. In many cases, the result is that hearing protection is not worn at all and one simply takes noise in stride without being aware of the consequences of excessive sound exposure. Hearing damage is often irreparable and can-not be reversed! Jrenum is hearing protection that is customised to your ears. As the images show, your hearing protection is made to measure based on a cast of your ear. This level of customisation ensures that your hearing protection fi ts your ears per-fectly, avoiding any unpleasant pressure. Expe-rience has shown that Jrenum hearing protec-
tion users don’t even notice the “ear plug” after wearing it for a while. We at Brütsch/Rüegger Tools consider it especially important that the entire process (from consultation to delivery) is handled by a true professional! This is why we come to you with the manufacturer and evalu-ate your hearing protection needs, customised to your company and your ears – because safety is also a matter of trust. Give us a call – our specialists Marc Hugelshofer, 044 736 64 48, and Domenico Iapello, 044 736 64 88, will be glad to help you.
PUMA Safety ShoesSafety footwear by PUMA Safety Shoes features an appealing modern and sporty design. The plastic cap and fl exible puncture protection as-sure all-round safety for your feet. Breathable textiles maintain a pleasant climate during the entire period of use. The safety shoe (BRW 534 002) is available in sizes 39–48 from inventory at Brütsch/Rüegger Tools – for only CHF 123.–.
The uvex u-fi t nitrile features an outstanding fi t and is the perfect choice for tasks that require manual dexterity and mechanical skills. The u-fi t is especially popular for fi ne assembly. Fea-tures appreciated by the wearer include charac-teristics such as a secure grip, optimum fi t and high strength. The u-fi t disposable protective gloves (BRW 530 415) are now available at the promotional price of CHF 12.90.
uvex u-fi t disposable protective gloves
New: FIBRO heavy duty pneumatic springs
The “new” standard heavy duty pneumatic springs are designed specially to meet the new imperatives in sheet metal processing (including, for example, high-strength sheet steel). They combine the greater spring forces of the BRW 865 055 POWER LINE pneu-matic springs with the outside dimensions and strokes of the standard BRW 865 050 springs. Properties:• spring forces starting at 1000 daN up to 9500 daN,
with strokes of up to 300 mm• standardized dimensions according to ISO-VDI-
CNOMO• unique safety features of FIBRO gas springs:– safety piston rod– overpressure protection - overstroke protection• the springs can be interconnected quite simply via
the lateral gas fi lling connection
• great fi xing fl exibility, from the top mounting and lower fi xing grooves, together with the tapped bores in the spring base
• optional gas connection in the spring base for hose compound or composite panel connection
For more information, please order the documenta-tion under reference number 03.08.You will fi nd our large range of FIBRO pneumatic springs at www.brw.ch – Standard parts – Spring ele-ments – Pneumatic springs
In our summer promotion until 31.08.10, we are also offering attractive sets at top prices. Two ex-amples: BRW 860 200, sets with 382 or 404 NBR, FPM or EPDM O-rings, metric or imperial, starting at CHF 53.–, BRW 861 340, set with 577 retaining rings DIN 471/DIN 472 for shafts or bores for CHF 233.–.Promotion brochure available under reference number 41.08.
Sets summer promotion
Quality that speaks for itself.Tempered couplings from Brütsch/Rüegger Tools are renowned for their quality and reliability! Made of brass with FKM O-rings, these couplings are de-signed for operating pressures of up to 20 bar and temperatures of up to 200°C (standard couplings) or 180°C (Safe Lock™ couplings). You will fi nd all H and D type couplings in the Normbook Edition 3 starting on page 130 or in our Toolshop at www.brw.ch – Advanced search - Standard parts – Cooling and heating elements.
When the design makes the installation of conven-tional ejectors impossible or when you need to eject thin-walled injection-moulded parts, we have the ideal solution for you: Static or dynamic pneumatic ejectors are attractive due to their extremely space-saving design and their large ejector end face. Both of these high quality products, BRW 837 520 and BRW 837 540, can be supplied from stock!
Top product: Pneumatic ejectors
As the only provider of FIBRO guide elements, we give you the opportunity to decide on the guide play of sliding guides or the camber of ball tracks your-self. Pairing classifi cation gives you the freedom to match guide elements precisely to your needs and in this way create the ideal conditions for best quality. You can download our “Guide columns – guide sleeves – selection matrix” brochure at www.brw.ch/Toolnews/Downloads Publications/Brochures.
Defi ne the pairing yourself
New PFERD grinding segmentsThe PFERD grinding segments, BRW 482 470, are outstanding for machining sand forms and sand cores, for rectifying and reworking junctions and mould release. Their wedge shape makes them ide-al for working in confi ned spaces as well as on large areas. Available types: length 235, grain 46, width 32/5 mm and length 246 mm, grain 46, width 42/4 mm. CHF 8.05 each.
New L-Boxx assortment case, BRW 548 160 (empty) or L-Boxx small parts case, BRW 548 170, with insert trays, in various versions. For safe stowing of power tools and small parts. With carrying handle and side grips. With a click mechanism to interconnect the boxes; for heavy loads. Joined boxes can be carried or moved easily by gripping the topmost one; the lid can take a load of up to 100 kg. More in our BOSCH brochure, reference 32.08.
Tool and service chest in one!
EREM – Swiss made
EREM electronic pliers made from high alloy steel, representing the very best Switzerland can pro-duce. The advantages: • replaceable foam handles, proof against electro-
static discharges• invisible spring providing gentle and constant
tension guarantees more than 1 million closing cycles
• special cutting edge for the desired cutting shape• induction-hardened cutting 63–65 HR for a very
long lifespan• opening of the tips limited to 5 mm, preventing
your hand from tiring
• special stop system preventing the cutters from overlapping
• Precision joints for smooth opening and closing• Good price/performance ratio The pliers are made from a cold drawn steel section and are not forged. The special tool steel is manu-factured using a unique Swiss process. You will fi nd our full range of EREM electronic pli-ers in the Toolshop at www.brw.ch when you enter “EREM” in the quick search fi eld.
New to our range: the Wera bit set, BRW 437 615, with 1/4” C 6.3 Allen key, in plastic box with quick-change mount and 29 bits including Allen key, Phil-lips, Pozidriv, fl at blade, Torx® and Torx® torsion blades. The promotion price of CHF 36.− (instead of CHF 73.−) is valid until 30.04.2011. For more Wera products, order our current Pole Position brochure see reference number 31.08.
Wera bit set promotion
The new hydraulic machine lifter FUTURO, BRW 554 041, lifts heavy loads easily, quickly and safely. Lifts with head or foot, reversible lifting claw, rotat-able radial arm base, removable pumping lever and folding carrying handle. Painted RAL 1023 yellow. Type NTG 30: safe working load 3 tons, price CHF 368.–; Type NTG 80: safe working load 8 tons, price CHF 482.–.
Effortless lifting!
Hanhart guarantees innovative technology and at-tractive product benefi ts in time measurement. To-day’s most important stopwatch manufacturer for mechanical stopwatches leaves nothing to be de-sired. Whether for sport or for industry, our stop-watches can be used in many fi elds. Special models are available upon request. You will fi nd our wide range of analogue and digital stopwatches in the Toolshop at www.brw.ch / BRW 170 130–170 430.
Stopwatches by Hanhart
In our complete Toolbook 17 catalogue (www.brw.ch) we are offering you under BRW 109 397 and BRW 109 412 the new FUTURO BASE LINE workshop callipers: the universal version with large, easy to read LCD dis-play, ON/OFF function, changeover between mm and inches, etc. For the dimensions 200 mm and 300 mm, models with and without fi ne adjustment are avail-able. All models come with a calibration certifi cate and are available from stock. Order today, use them tomorrow!
The notorious workshop assistant...
Azurea plug gauges with square ends and inter-changeable steel bodies in proven Swiss quality are available individually or as sets. Plug gauges are available up to Ø 20.00 mm in increments of 0.01 mm with an accuracy of 0.0004 mm (up to Ø 5 mm from stock). Other increments are available upon request. You will fi nd these outstanding products in our Toolshop at www.brw.ch / BRW 164 100–164 120.
Uncompromising precision
Benzing plan tables (www.brw.ch, BRW 127 360–127 450) have been in Brütsch/Rüegger’s range of tools for many years. Their robust construction and high quality production makes them ideal plan ta-bles, particularly for precise measurements. We of-fer ceramic and steel tabletops, in circular, rectan-gular or square versions. A helper you can trust. We are happy to advise you: [email protected] / [email protected], Tel. +41 44 736 63 63.
BENZING - proven over the years
With the MECMESIN TORNADO torque measuring device, BRW 172 410 (www.brw.ch), you can simply and accurately measure the torque when removing or tightening screw caps. The construction of these appliances from MECMESIN is very robust. They are IP54 protected and have an accuracy of ± 0.5% of the full measuring range. They were developed specially for testing screw caps on bottles. MECME-SIN products are used in a wide variety of industry sectors and have an excellent reputation world-wide. Brütsch/Rüegger tools is MECMESIN’s offi cial representative in Switzerland and would be happy to advise you on specifi c issues and measurement problems. Your contact: [email protected].
Screw cap testing –as easy as abc
The user-friendly IMBUS plug-in module system from IBR (www.brw.ch), BRW 154 735, opens a wealth of opportunities for connecting your digital measuring equipment to a PC by cable. Depending on the chosen module, you can connect a range of measuring equipment, such as measuring sensors, callipers, micrometer gauges, altimeters, roughness measuring devices, etc. Take note - measuring equipment from different manufacturers may come with different interface protocols. If necessary, we can program special interface drivers. With the help of the IBREXDLL software, BRW 154 745, you can import and analyze your measurement data direct-ly in MS EXCEL. Further information from: [email protected] or [email protected].
A worthwhile connection
Technische Information TI-D.016 [DE]Führungssäulen-Führungsbuchsen-Auswahlmatrix
Führungssäulen
ECO-Line
2021.29.
202.29.
202.31.
Rz2.5
h4-0.002
-0.007
ÑÑ
Ñl
ll
ll
ll
ll
ll
Führungssäulen
für
Großw
erkzeuge
2022.12.
2022.13.
2022.15.
2022.16.
2022.17.
2022.19.
2022.29.
Rz4
f6-0.025
-0.041
ÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñl
ll
ll
Führungssäulen
nach
CNOMO
2022.16.45.
Rz4
-0.010
-0.025
ÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñl
ll
ll
Führungssäulen
nach
AFN
OR
2022.25.
Rz4
h50
-0.011
ÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñl
ll
ll
Führungssäulen
mit
Mittenbund
2020.62.
202.60.
Rz1
.10
0-0.002
l1
l1
l1
Rz1
.20
-0.002
-0.004
l1
l1
l1
Rz1
.30
-0.004
-0.007
l1
l1
l1
Führungssäulen
mit
Mittenbund
2020.63.
2020.64.
Rz1
h30
-0.004
l1
l1
l1
Führungssäulen
nach
DIN
9825
Führungssäulen
zum
Anschrauben
Wechsel-Fürhungs-
säulen
202.17.
2021.50.
202.19.
2021.58.
202.21.
2021.44.
202.22.
2021.46.
202.23.
202.55.
202.24.
Rz1
.10
0-0.002
l1
l1
l1
l1
l1
l1
Rz1
.20
-0.002
-0.004
l1
l1
l1
l1
l1
l1
Rz1
.30
-0.004
-0.007
l1
l1
l1
l1
l1
l1
Führun
gssäulen
Oberflächen-qualität
Toleranz-bereich
Toleranzenfür ø40
-0.006-0.008
-0.008-0.010
-0.010-0.013
+0.014+0.010
+0.018+0.014
+0.024+0.018
+0.016+0.003
+0.015+0.004
+0.011+0.003
Toleranz-bereich
.10
.20
.30
.10
.20
.30
H6
IT5
H5
Ober-flächen-qualität
Rz1
Führungsbuchsen2061.44. 2081.44.206.49. 2081.45.2061.47. 2081.46.2081.67. 2081.47.2091.67. 2081.49.2091.44. 210.44.2091.45. 210.45.2091.46. 210.46.2031.41. 2031.42.2031.44.
2031.31. 2081.31.2031.34. 2081.32.2031.38. 2081.33.2051.32. 2081.34.2091.31. 2081.35.2091.32. 210.31.2091.34. 210.34.
210.35.
Kugelführungsbuchsen
Säulenblöcke mit Kugelfüh-rungsbuchsen
FRANKEN: new, powerful tools for demanding processesFranken tools are invariably a good choice for de-manding processing jobs.Brütsch/Rüegger Tools has considerably extended their range of Franken products and brought it up to date.High performance roughing cutters without (BRW 221 870) and with (BRW 221 875) interior cooling are particularly suitable for use in mechanical engi-neering. The Enorm mill for universal use, with inte-rior cooling, is available as a shaft cutter (BRW 221 160) and as a torus cutter (BRW 221 150). The universally stable ball cutter (BRW 221 600) is avail-able in diameters from 0.2 mm upwards.The multi-cut VHM carbide cutter (BRW 221 710) enables to you to achieve grinding quality. HSC cut-ters with the VHM carbide ball cutter (BRW
221 765) and the VHM torus carbide cutter (BRW 221 730) reduce polishing costs. The VHM carbide ball cutter (BRW 221 770) and the VHM torus car-bide cutter (BRW 221 745) are particularly suitable for milling with protruding lengths up to 12 x d.Cutting speeds in the information sheets will also help you when using these new tools.Take a look at our extended range. It is worthwhile! Profi t from a 20% discount up until 30.11.2010.Our technicians will be pleased to advise you – also on-site. Phone +41 44 736 63 63.
The brand new Magafor Bi-Face forward and re-verse deburrer is the ideal tool for effi cient deburr-ing. These deburrers are available from stock in the 90° mini version (BRW 224 130), the 90° degree standard version (BRW 224 135) and the 60° stan-dard version (BRW 224 140). All three versions are available uncoated or with Hard’X coating.Try this tool for yourself during our extended 25% introductory promotion until 30.11.2010.
Effi cient deburring – Extended promotion
Improve tool durability –an easy achievement through better cooling and lubrication. The REGO-FIX type KS/ER cooling disc (BRW 339 240) features a peripheral coolant supply. This results in better chip removal and therefore noticeably greater durability. The universal cooling disc is compatible with all REGO-FIX collet chucks (BRW 339 000 and BRW 339 040) as well as the cor-responding clamping nuts (BRW 339 200).These are available from stock at BRW as usual.
The DIXI 4007 carbide reamer (BRW 284 080) allows you to produce all tolerances accurately. The reamer with left-hand rifl ing and a right-hand cut is available in 120 sizes, in diameters from 0.48 mm to 12.02 mm and with tolerances of 0/0.003 mm. With interior cooling from a diameter of 2.97 mm upwards.Get an overview at www.brw.ch.
Dixi VHM machine reamers
The new solinos single clamp for small parts from Gressel (BRW 413 370) is an ideal and cost-effective production solution. The solinos reveals its strengths whether used as a multi-point clamping system, on palette changers or to clamp tombstones. The com-pact, lightweight design (approx. 5.5 kg) with a relatively large clamping range of 0–156 mm (with VS jaw) and the high clamping force of up to 20 kN leaves little to be desired.
An ideal solution for your production
Brütsch / Rüegger Tools Ltd.P.O. Box | CH-8010 ZurichPhone +41 44 736 63 63 | Fax +41 44 736 63 00www.brw.ch | [email protected]
Personal Protective EquipmentAssembly Technology Standard PartsMeasurement Technology Production Technology
Brütsch / Rüegger Tools Ltd.P.O. Box | CH-8010 ZurichPhone +41 44 736 63 63 | Fax +41 44 736 63 00www.brw.ch | [email protected]
You only have two eyes and so you should pro-tect them. The new EKASTU safety goggles fea-ture a modern, sporty design. A large fi eld of vision offers all-round protection for your eyes. The profi led nosepiece, pleasantly soft earpiec-es and the low weight assure a high level of wearer comfort.The EKASTU safety goggles (BRW 531 111) are available in clear and grey for CHF 11.–.
EKASTU safety goggles
Ideal for installers or anyone who does not have access to soap and water. STOKO cleaning cloths will clean your hands without water, even in case of tough dirt. The cleaning cloths (BRW 537 285) are available in bags of 10 sheets or handy buckets of 70 sheets. You will fi nd a full range of skin protection products offered by Brütsch/Rüegger Tools at www.brw.ch.
Hand cleaning on the road
Hearing protection that fi ts!
Hearing protection that does not fi t causes pressure and pain in the ear, counteracting reg-ular use. In many cases, the result is that hearing protection is not worn at all and one simply takes noise in stride without being aware of the consequences of excessive sound exposure. Hearing damage is often irreparable and can-not be reversed! Jrenum is hearing protection that is customised to your ears. As the images show, your hearing protection is made to measure based on a cast of your ear. This level of customisation ensures that your hearing protection fi ts your ears per-fectly, avoiding any unpleasant pressure. Expe-rience has shown that Jrenum hearing protec-
tion users don’t even notice the “ear plug” after wearing it for a while. We at Brütsch/Rüegger Tools consider it especially important that the entire process (from consultation to delivery) is handled by a true professional! This is why we come to you with the manufacturer and evalu-ate your hearing protection needs, customised to your company and your ears – because safety is also a matter of trust. Give us a call – our specialists Marc Hugelshofer, 044 736 64 48, and Domenico Iapello, 044 736 64 88, will be glad to help you.
PUMA Safety ShoesSafety footwear by PUMA Safety Shoes features an appealing modern and sporty design. The plastic cap and fl exible puncture protection as-sure all-round safety for your feet. Breathable textiles maintain a pleasant climate during the entire period of use. The safety shoe (BRW 534 002) is available in sizes 39–48 from inventory at Brütsch/Rüegger Tools – for only CHF 123.–.
The uvex u-fi t nitrile features an outstanding fi t and is the perfect choice for tasks that require manual dexterity and mechanical skills. The u-fi t is especially popular for fi ne assembly. Fea-tures appreciated by the wearer include charac-teristics such as a secure grip, optimum fi t and high strength. The u-fi t disposable protective gloves (BRW 530 415) are now available at the promotional price of CHF 12.90.
uvex u-fi t disposable protective gloves
New: FIBRO heavy duty pneumatic springs
The “new” standard heavy duty pneumatic springs are designed specially to meet the new imperatives in sheet metal processing (including, for example, high-strength sheet steel). They combine the greater spring forces of the BRW 865 055 POWER LINE pneu-matic springs with the outside dimensions and strokes of the standard BRW 865 050 springs. Properties:• spring forces starting at 1000 daN up to 9500 daN,
with strokes of up to 300 mm• standardized dimensions according to ISO-VDI-
CNOMO• unique safety features of FIBRO gas springs:– safety piston rod– overpressure protection - overstroke protection• the springs can be interconnected quite simply via
the lateral gas fi lling connection
• great fi xing fl exibility, from the top mounting and lower fi xing grooves, together with the tapped bores in the spring base
• optional gas connection in the spring base for hose compound or composite panel connection
For more information, please order the documenta-tion under reference number 03.08.You will fi nd our large range of FIBRO pneumatic springs at www.brw.ch – Standard parts – Spring ele-ments – Pneumatic springs
In our summer promotion until 31.08.10, we are also offering attractive sets at top prices. Two ex-amples: BRW 860 200, sets with 382 or 404 NBR, FPM or EPDM O-rings, metric or imperial, starting at CHF 53.–, BRW 861 340, set with 577 retaining rings DIN 471/DIN 472 for shafts or bores for CHF 233.–.Promotion brochure available under reference number 41.08.
Sets summer promotion
Quality that speaks for itself.Tempered couplings from Brütsch/Rüegger Tools are renowned for their quality and reliability! Made of brass with FKM O-rings, these couplings are de-signed for operating pressures of up to 20 bar and temperatures of up to 200°C (standard couplings) or 180°C (Safe Lock™ couplings). You will fi nd all H and D type couplings in the Normbook Edition 3 starting on page 130 or in our Toolshop at www.brw.ch – Advanced search - Standard parts – Cooling and heating elements.
When the design makes the installation of conven-tional ejectors impossible or when you need to eject thin-walled injection-moulded parts, we have the ideal solution for you: Static or dynamic pneumatic ejectors are attractive due to their extremely space-saving design and their large ejector end face. Both of these high quality products, BRW 837 520 and BRW 837 540, can be supplied from stock!
Top product: Pneumatic ejectors
As the only provider of FIBRO guide elements, we give you the opportunity to decide on the guide play of sliding guides or the camber of ball tracks your-self. Pairing classifi cation gives you the freedom to match guide elements precisely to your needs and in this way create the ideal conditions for best quality. You can download our “Guide columns – guide sleeves – selection matrix” brochure at www.brw.ch/Toolnews/Downloads Publications/Brochures.
Defi ne the pairing yourself
New PFERD grinding segmentsThe PFERD grinding segments, BRW 482 470, are outstanding for machining sand forms and sand cores, for rectifying and reworking junctions and mould release. Their wedge shape makes them ide-al for working in confi ned spaces as well as on large areas. Available types: length 235, grain 46, width 32/5 mm and length 246 mm, grain 46, width 42/4 mm. CHF 8.05 each.
New L-Boxx assortment case, BRW 548 160 (empty) or L-Boxx small parts case, BRW 548 170, with insert trays, in various versions. For safe stowing of power tools and small parts. With carrying handle and side grips. With a click mechanism to interconnect the boxes; for heavy loads. Joined boxes can be carried or moved easily by gripping the topmost one; the lid can take a load of up to 100 kg. More in our BOSCH brochure, reference 32.08.
Tool and service chest in one!
EREM – Swiss made
EREM electronic pliers made from high alloy steel, representing the very best Switzerland can pro-duce. The advantages: • replaceable foam handles, proof against electro-
static discharges• invisible spring providing gentle and constant
tension guarantees more than 1 million closing cycles
• special cutting edge for the desired cutting shape• induction-hardened cutting 63–65 HR for a very
long lifespan• opening of the tips limited to 5 mm, preventing
your hand from tiring
• special stop system preventing the cutters from overlapping
• Precision joints for smooth opening and closing• Good price/performance ratio The pliers are made from a cold drawn steel section and are not forged. The special tool steel is manu-factured using a unique Swiss process. You will fi nd our full range of EREM electronic pli-ers in the Toolshop at www.brw.ch when you enter “EREM” in the quick search fi eld.
New to our range: the Wera bit set, BRW 437 615, with 1/4” C 6.3 Allen key, in plastic box with quick-change mount and 29 bits including Allen key, Phil-lips, Pozidriv, fl at blade, Torx® and Torx® torsion blades. The promotion price of CHF 36.− (instead of CHF 73.−) is valid until 30.04.2011. For more Wera products, order our current Pole Position brochure see reference number 31.08.
Wera bit set promotion
The new hydraulic machine lifter FUTURO, BRW 554 041, lifts heavy loads easily, quickly and safely. Lifts with head or foot, reversible lifting claw, rotat-able radial arm base, removable pumping lever and folding carrying handle. Painted RAL 1023 yellow. Type NTG 30: safe working load 3 tons, price CHF 368.–; Type NTG 80: safe working load 8 tons, price CHF 482.–.
Effortless lifting!
Hanhart guarantees innovative technology and at-tractive product benefi ts in time measurement. To-day’s most important stopwatch manufacturer for mechanical stopwatches leaves nothing to be de-sired. Whether for sport or for industry, our stop-watches can be used in many fi elds. Special models are available upon request. You will fi nd our wide range of analogue and digital stopwatches in the Toolshop at www.brw.ch / BRW 170 130–170 430.
Stopwatches by Hanhart
In our complete Toolbook 17 catalogue (www.brw.ch) we are offering you under BRW 109 397 and BRW 109 412 the new FUTURO BASE LINE workshop callipers: the universal version with large, easy to read LCD dis-play, ON/OFF function, changeover between mm and inches, etc. For the dimensions 200 mm and 300 mm, models with and without fi ne adjustment are avail-able. All models come with a calibration certifi cate and are available from stock. Order today, use them tomorrow!
The notorious workshop assistant...
Azurea plug gauges with square ends and inter-changeable steel bodies in proven Swiss quality are available individually or as sets. Plug gauges are available up to Ø 20.00 mm in increments of 0.01 mm with an accuracy of 0.0004 mm (up to Ø 5 mm from stock). Other increments are available upon request. You will fi nd these outstanding products in our Toolshop at www.brw.ch / BRW 164 100–164 120.
Uncompromising precision
Benzing plan tables (www.brw.ch, BRW 127 360–127 450) have been in Brütsch/Rüegger’s range of tools for many years. Their robust construction and high quality production makes them ideal plan ta-bles, particularly for precise measurements. We of-fer ceramic and steel tabletops, in circular, rectan-gular or square versions. A helper you can trust. We are happy to advise you: [email protected] / [email protected], Tel. +41 44 736 63 63.
BENZING - proven over the years
With the MECMESIN TORNADO torque measuring device, BRW 172 410 (www.brw.ch), you can simply and accurately measure the torque when removing or tightening screw caps. The construction of these appliances from MECMESIN is very robust. They are IP54 protected and have an accuracy of ± 0.5% of the full measuring range. They were developed specially for testing screw caps on bottles. MECME-SIN products are used in a wide variety of industry sectors and have an excellent reputation world-wide. Brütsch/Rüegger tools is MECMESIN’s offi cial representative in Switzerland and would be happy to advise you on specifi c issues and measurement problems. Your contact: [email protected].
Screw cap testing –as easy as abc
The user-friendly IMBUS plug-in module system from IBR (www.brw.ch), BRW 154 735, opens a wealth of opportunities for connecting your digital measuring equipment to a PC by cable. Depending on the chosen module, you can connect a range of measuring equipment, such as measuring sensors, callipers, micrometer gauges, altimeters, roughness measuring devices, etc. Take note - measuring equipment from different manufacturers may come with different interface protocols. If necessary, we can program special interface drivers. With the help of the IBREXDLL software, BRW 154 745, you can import and analyze your measurement data direct-ly in MS EXCEL. Further information from: [email protected] or [email protected].
A worthwhile connection
Technische Information TI-D.016 [DE]Führungssäulen-Führungsbuchsen-Auswahlmatrix
Führungssäulen
ECO-Line
2021.29.
202.29.
202.31.
Rz2.5
h4-0.002
-0.007
ÑÑ
Ñl
ll
ll
ll
ll
ll
Führungssäulen
für
Großw
erkzeuge
2022.12.
2022.13.
2022.15.
2022.16.
2022.17.
2022.19.
2022.29.
Rz4
f6-0.025
-0.041
ÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñl
ll
ll
Führungssäulen
nach
CNOMO
2022.16.45.
Rz4
-0.010
-0.025
ÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñl
ll
ll
Führungssäulen
nach
AFN
OR
2022.25.
Rz4
h50
-0.011
ÑÑ
ÑÑ
ÑÑ
ÑÑ
Ñl
ll
ll
Führungssäulen
mit
Mittenbund
2020.62.
202.60.
Rz1
.10
0-0.002
l1
l1
l1
Rz1
.20
-0.002
-0.004
l1
l1
l1
Rz1
.30
-0.004
-0.007
l1
l1
l1
Führungssäulen
mit
Mittenbund
2020.63.
2020.64.
Rz1
h30
-0.004
l1
l1
l1
Führungssäulen
nach
DIN
9825
Führungssäulen
zum
Anschrauben
Wechsel-Fürhungs-
säulen
202.17.
2021.50.
202.19.
2021.58.
202.21.
2021.44.
202.22.
2021.46.
202.23.
202.55.
202.24.
Rz1
.10
0-0.002
l1
l1
l1
l1
l1
l1
Rz1
.20
-0.002
-0.004
l1
l1
l1
l1
l1
l1
Rz1
.30
-0.004
-0.007
l1
l1
l1
l1
l1
l1
Führun
gssäulen
Oberflächen-qualität
Toleranz-bereich
Toleranzenfür ø40
-0.006-0.008
-0.008-0.010
-0.010-0.013
+0.014+0.010
+0.018+0.014
+0.024+0.018
+0.016+0.003
+0.015+0.004
+0.011+0.003
Toleranz-bereich
.10
.20
.30
.10
.20
.30
H6
IT5
H5
Ober-flächen-qualität
Rz1
Führungsbuchsen2061.44. 2081.44.206.49. 2081.45.2061.47. 2081.46.2081.67. 2081.47.2091.67. 2081.49.2091.44. 210.44.2091.45. 210.45.2091.46. 210.46.2031.41. 2031.42.2031.44.
2031.31. 2081.31.2031.34. 2081.32.2031.38. 2081.33.2051.32. 2081.34.2091.31. 2081.35.2091.32. 210.31.2091.34. 210.34.
210.35.
Kugelführungsbuchsen
Säulenblöcke mit Kugelfüh-rungsbuchsen
FRANKEN: new, powerful tools for demanding processesFranken tools are invariably a good choice for de-manding processing jobs.Brütsch/Rüegger Tools has considerably extended their range of Franken products and brought it up to date.High performance roughing cutters without (BRW 221 870) and with (BRW 221 875) interior cooling are particularly suitable for use in mechanical engi-neering. The Enorm mill for universal use, with inte-rior cooling, is available as a shaft cutter (BRW 221 160) and as a torus cutter (BRW 221 150). The universally stable ball cutter (BRW 221 600) is avail-able in diameters from 0.2 mm upwards.The multi-cut VHM carbide cutter (BRW 221 710) enables to you to achieve grinding quality. HSC cut-ters with the VHM carbide ball cutter (BRW
221 765) and the VHM torus carbide cutter (BRW 221 730) reduce polishing costs. The VHM carbide ball cutter (BRW 221 770) and the VHM torus car-bide cutter (BRW 221 745) are particularly suitable for milling with protruding lengths up to 12 x d.Cutting speeds in the information sheets will also help you when using these new tools.Take a look at our extended range. It is worthwhile! Profi t from a 20% discount up until 30.11.2010.Our technicians will be pleased to advise you – also on-site. Phone +41 44 736 63 63.
The brand new Magafor Bi-Face forward and re-verse deburrer is the ideal tool for effi cient deburr-ing. These deburrers are available from stock in the 90° mini version (BRW 224 130), the 90° degree standard version (BRW 224 135) and the 60° stan-dard version (BRW 224 140). All three versions are available uncoated or with Hard’X coating.Try this tool for yourself during our extended 25% introductory promotion until 30.11.2010.
Effi cient deburring – Extended promotion
Improve tool durability –an easy achievement through better cooling and lubrication. The REGO-FIX type KS/ER cooling disc (BRW 339 240) features a peripheral coolant supply. This results in better chip removal and therefore noticeably greater durability. The universal cooling disc is compatible with all REGO-FIX collet chucks (BRW 339 000 and BRW 339 040) as well as the cor-responding clamping nuts (BRW 339 200).These are available from stock at BRW as usual.
The DIXI 4007 carbide reamer (BRW 284 080) allows you to produce all tolerances accurately. The reamer with left-hand rifl ing and a right-hand cut is available in 120 sizes, in diameters from 0.48 mm to 12.02 mm and with tolerances of 0/0.003 mm. With interior cooling from a diameter of 2.97 mm upwards.Get an overview at www.brw.ch.
Dixi VHM machine reamers
The new solinos single clamp for small parts from Gressel (BRW 413 370) is an ideal and cost-effective production solution. The solinos reveals its strengths whether used as a multi-point clamping system, on palette changers or to clamp tombstones. The com-pact, lightweight design (approx. 5.5 kg) with a relatively large clamping range of 0–156 mm (with VS jaw) and the high clamping force of up to 20 kN leaves little to be desired.
An ideal solution for your production
Real funny
Brütsch/Rüegger ToolsPromotional Supplier of the BMW Sauber F1 Team
Last Minute
Contents Pearls of wisdom
In focus
Independent monthly publication for tools and standard partsNumber 444, August 2010
Brütsch / Rüegger Tools Ltd.P.O. Box | CH-8010 ZurichPhone +41 44 736 63 63 | Fax +41 44 736 63 00www.brw.ch | [email protected]
Brütsch / Rüegger Tools Ltd.P.O. Box | CH-8010 ZurichPhone +41 44 736 63 63 | Fax +41 44 736 63 00www.brw.ch | [email protected]
Our partner
Servicebox
Measurement Technology
Production Technology
Assembly Technology
Forum
Standard Parts
Personal Protective Equipment
The new safety goggles by UNICO and EKASTU look more like sports and leisure goggles than safety goggles. Only safety gog-gles that are actually used can also protect your eyes. This is why safety goggles should look as appealing as possible. Benefi t from our introductory promotion! BRW 531 111, EKASTU safety goggles, CHF 11.–instead of CHF 14.30BRW 531 188, UNICO safety goggles, CHF 12.–instead of CHF 14.70
Offer valid until 31 August 2010.
Safety goggle promotion
You can only gain from our current special promotion of EDM electrodes! With one-off special discounts on electrolyte copper and tung-sten copper, we are giving you the opportunity to add to your store of material and save money at the same time. The attached brochure shows you the enormous choice of tubes, multi-channel tubes, tapped electrodes, circular/square/rectangular rods in dif-ferent sizes and plates both materials.At the same time, you will be saving twice at the same time – on material and on processing – it couldn’t be easier! This special offer is valid for three month – the durability of cop-per on the other hand is almost unlimited... Promotional brochure under reference number 42.08.
Special EDM electrode promotion
Wenger pocket knife, BRW 457 782, 20 parts: Fixed blade, wire bender, fl at blade screwdriver, spring-loaded scissors with serrated edge, Phillips screwdriver, multi-function pliers with insu-lation clamp, wire cutters, side cutters, wrench, open jaw wrench, etc. Price CHF 72.–.Wenger multi-function pocket knife, BRW 457 810: 12-part, fi xed serrated blade, combination pliers with wire cutters, metal fi le, hacksaw, Phillips size 3 and fl at blade screwdriver inserts, etc. Supplied in belt pouch. Price CHF 160.–.You will fi nd more new Wenger pocket knives at www.brw.ch, under “Wenger” in the quick search fi eld.
Swiss quality
Surface profi les are as variable as landscape pro-fi les. The Black Forest and the Alps are mountain ranges, which differ not only in their highest peaks but also in the form and width of their valleys. It is equally complex to describe a surface like a moun-tain landscape.For surface roughness measurements, the electri-cal sampling cut method with a mechanical tracing
stylus is assuming a central role. Roughness measuring equipment with a high-precision mounted diamond tip with a radius of 2 µm/60° or 5 µm/90° and a skid is used. Surface param-eters are given in µm. Don’t forget: a human hair has a thickness of 50 µm and a fi ngerprint 4 µm. Contact: [email protected].
...across mountains and valleys?
Further catalogues from Brütsch/Rüegger Tools at a glance Toolbook, Edition 17The big tool catalogue with thecomplete product range on 2800 pages,incl. fi xed price and stock list.Reference number 05.08 Normbook, Edition 3Professional Collection 2010Mould construction and stamping technologyReference number 06.08
SYLVAC µ_PRICES_10Reference number 01.08
Professional tools by Brütsch/RüeggerReference number 02.08
Pneumatic springs, HEAVY DUTY standardOptimised for the latest challenges in sheet metal processingReference number 03.08
FUTURO catalogue, 2010 editionThe new comprehensive catalogue for the exclu-sive Brütsch/Rüegger Tools house brand is here.370 pagesReference number 04.08
A wide range of services The new buildings allow services for industry, small businesses, the retail trades and private customers to be provided under ideal conditions. At the same time, a wide range of business sec-tors is covered: engineering, assembly, prefabri-cation and packaging, carpentry, garden and landscape maintenance, cultivation of organic vegetables and a laundry. A particular service is an external team which - under the supervision of a qualifi ed supervisor - carries out work on-site.
A focus on the mechanical side Work on mechanical parts takes place in the modern, well-equipped mechanical workshop. In addition, tasks from drawing to fi nishing of
MBF foundation: a storybook social companyAnyone who still thinks of social companies as “homes for the handi-capped” in the traditional sense should take a trip to the Swiss can-ton of Aargau. Here, the MBF foun-dation, “a social company for the handicapped in the Fricktal” recently inaugurated its new building: Mod-ern, simple architecture with clean lines, brightly lit workshops and a lavish company cafeteria for the workforce of more than one hun-dred. The MBF foundation is ISO-9001certifi ed and has the BSV-IV quality label. The carpenter’s shop is FSC certifi ed and complies with KPM 15 ISPM 15 directives. The company has the NPO label for management excellence. In short: the MBF foun-dation is a social institution that is available to business as a fully-fl edged market partner.
An extensive catalogue of jobs
In accordance with its charter, the MBF founda-tion offers people with a handicap appropriate jobs, occupation, training and residential place-ments. More than 90 people with a handicap use the residential facilities, a total of around 200 people working in different sections. The range extends from creative workshops for people with a severe handicap to training places for a federal EBA professional test. As a social com-pany recognized by the canton of Aargau, it has to comply with the conditions and directives of the Swiss Care Act. To implement all the de-mands and conditions and still provide a service tailored to the market requires a considerable degree of skill at all levels. To this end, business and group managers have attended supplemen-tary teacher training to add to their professional experience.
parts are carried out by a single source, includ-ing surface processing work by external part-ners. Steel, stainless steel, aluminium, copper, bronze and plastic is processed. Almost all com-mon types of metal processing are on offer, with the machine shop tools spanning the range from CNC machining centres and auto-matic saws down to simple bench drilling ma-chines.
Professionalism in procurement The MBF foundation shows its professionalism in procurement not only in the ordering of tools for everyday needs, where group leaders normally order directly via the www.brw.ch Toolshop. Be-sides minimising the cost of the procurement process, the compatibility of the new equipment and furniture to be purchased for the new build-ing with the existing inventory plays an impor-tant role. This is where Brütsch/Rüegger tools could demonstrate its traditional strengths: as Switzerland’s largest tool specialist – with the largest warehouse in Switzerland – all the neces-sary additions and new installations of Lista cabi-nets, superstructures, drawer storage cabinets, workbenches, wardrobes, etc. could be assem-bled in record time.
The MBF foundation’s portfolio Go to www.stiftung-mbf.ch to get more informa-tion. Or, at reference number 72.08 ask for the practical A5-size brochure (in German), which Modern machines help social companies provide services tailored to the market
Demanding assembly tasks using, for example, presses are also offered
A group leader setting up the CNC machining centre for the next job
Keeping an eye on everything, even for the simpler technical tasks
The spotless wardrobe - equipped by Brütsch/Rüegger Tools with Lista cabinets
sets out the MBF foundation’s complete range of goods and services.
Seminar with the BMW Sauber F1 team in HinwilTuesday 26 October 2010, starting at 1.30 p.m.
Tool management with removal systems and scanner solutions The Tool Box System is a modular system for controlled tool management. It provides tidy and safe tool storage, optimizes storage vol-umes, reduces storage costs, re-orders automati-cally and is available around the clock. The fully integrated scanner solutions are paperless data recording systems using barcodes. You do not need any data management software, since the entire process support system all the way to label printing is integrated in the Toolshop www.brw.ch. During the seminar, we will be showing you both inventory management systems and their opportunities for simultaneously improving quality and reducing costs. Ask for your invita-tion to the seminar quoting reference number 71.08 and enrol today. The charge per partici-pant is CHF 95.−. Applications will be dealt with in the order they are received.
Assembly technology: top performance with serviceThe assembly technology compe-tence centre clearly shows how much the requirements for tool pro-fessionals have changed: technical tool knowledge has become a core competence. Customers are think-ing increasingly in terms of com-plete processes and this is opening up a new tasks for full-range suppli-ers such as Brütsch/Rüegger Tools: tool labelling, fi lling of assembly sets to order, fi tting, servicing and upgrading complete tool sets in as-sembly vehicles, special foam inserts for tool drawers, etc. Brütsch/Rüeg-ger Tools is taking over multiple process steps up to and including the entire process, relieving the cus-tomers of laborious detail and coor-dination tasks.
The concept and how it works
Our customers describe to us all the tasks which their installation engineers carry out. This infor-mation is then used to create a specifi c tool re-quirement profi le. Brütsch/Rüegger Tools assem-bles a complete set of tools. These are ergonomically correct and technically matched to the task, of defi ned quality and in the pre-scribed sizes and weights. It must also be possi-ble to add to the set if it is found in practice that new tools are needed. The overall function is im-portant, so that the installation engineer can work at maximum effi ciency. The tools or brand names that are used to do this are of secondary importance. The concept is “great things in small packages”.
The concept as a processes Outsourcing individual processes and combin-ing them into overall processes with the sup-plier makes sense: instead of expensive orders for individual tools, there is simply one cata-logue number for the set. Details are fi led at Brütsch/Rüegger Tools on Myshop in a purchas-ing list and can be repeated with a single click (www.brw.ch). You hand over servicing, in-spection and fi lling to the Brütsch/Rüegger Tools specialist, so that the technician can con-centrate fully on his work. Your Brütsch/Rüeg-ger Tools contact is responsible for everything else.
The concept for the customer Speed and effi ciency play an important role in the areas of servicing, inspection, cleaning and re-placement of tool sets and the equipment for com-plete assembly vehicles (see picture on title page). At this point, Brütsch/Rüegger Tools can demon-strate one of its strengths: assembly vehicles come directly on to the ramp and the tool sets directly into the picking room, where the content is checked by experts and parts are replaced. The paths are extremely short, the Brütsch/Rüegger Tools technician is familiar with every tool and whips everything into shape. For assembly technol-ogy services, please contact [email protected].
Checking, cleaning or replacing each tool in a assembly tool vehicle
Filling a FUTURO fitter’s tool case
Equipping an assembly case according to the customer’s specification
Filling a tool roll for the machine industry
Organising tools in a toolbox
A guide to concentration
Hartmut Volk, MBA and freelance business publisher, Bad Harzburg
Experience fl ow in realityConcentrated working can be learned. Par-ticularly when your head is bursting and your list of tasks seems never-ending, you should take a deep breath and relax. External peace can be created with a daily time slot when you ensure you are not interrupted. This time is best spent on demanding and diffi cult tasks.However, concentration also needs intelli-gent organization: this includes a task list with set priorities, a weekly plan as well as a to-do list.Anyone who takes this to heart and can focus completely on a problem forgets time and himself, is fully absorbed by what he is doing and experiences so-called fl ow: everything comes together and moves as if by itself. An incomparable feeling!Interested? Request your personal copy (2 pages in German) by quoting reference num-ber 70.08 on www.brw.ch in the Toolnews/Publications section (PDF fi le).
µ_PRICES_10
Schweizer Hersteller von Präzisionsmessinstrumenten seit 1969
VerzeichnisS_Cal PRO 2
S_Cal ONE 2
S_Cal MICRON 3
S_Mike PRO 4-5
Satz S_Mike PRO & S_Cal PRO 5
S_Dial ONE 6
S_Dial S229 7
S_Dial S213 8
S_Dial S233 / S234 8
X_Treme SXTD / SXTH 9
Ultima 9
S_Cal UL III 10
Hi_Cal Satz 11
S_View D50S / D50S PRO 12
S_View D60S PRO 13
S_View D200S 14-15
S_Dial ONE
S_Cal MICRON
D60S PRO
S_Cal PRO
S_Mike PRO
S_Cal ONE
Gültigkeit 31.12.2010
WuWuW susu chhhhhhh
Die Profitoolsvon Brütsch/Rüegger
ich bin einabsoluterprofi!
aber nureiner vonvielen.
Genau.
Gasdruckfedern,Standard ‒HEAVY DUTYFür die neuen Herausforderungen in derBlechbearbeitung optimiert
The 5xD FUTURO VHM spiral bit is now also available from stock (BRW 255 570) with a whistle-notch clamping surface. This makes application easier – in particular on lathes. This tool distin-guishes itself through its concave cutting geometry with point thinning and special bevel as well as the high-quality coating on a TiAlN-TIN base. This makes an unusually broad range of applications in various materials possible.
FUTURO VHM 5xD spiral bits
How convenient.It‛s a leafletfor a glazier.
A worthwhile connectionScrew cap testingUncompromising precisionBENZING – proven over the years
FRANKEN toolsSolinos – the ideal solutionDixi VHM machine reamersFuturo VHM spiral bits
EREM – Swiss madeNew PFERD grinding segmentsTool and service chest all in oneWENGER pocket knives
MBF foundation: the storybook social company with an extensive task catalogue, a wide range of services and professionalism in procurement
FIBRO heavy duty pneumatic springsTempered couplingsSummer promotion setsSpecial promotion – EDM electrodes
Hearing protection that fits!PUMA safety shoesHand cleaning on the moveSafety goggles offer