M*CARBO Marlin 60 / 795 Pre 2008 Picatinny Rail / Scope Mount

You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.

Download or Print Instructions | Contact: help@mcarbo.com | Page 1

Step 1: Clear your Firearm - Check the chamber, bolt face and magazine well.

Step 2: Gather Parts and Tools Needed

Step 3: Slide your new picatinny rail onto the dovetail.

1. Picatinny Rail2. 1/16" Allen Key3. 6 Set Screws4. Loctite Blue 242

Step 4: Use a small dab of blue loctite on each screw. Using your 1/16th Inch Allen Key, screw in

each set screw starting in the middle.

M*CARBO Marlin 60 / 795 Pre 2008 Picatinny Rail / Scope Mount

You must be 18 yrs of age to purchase. We advise that all parts purchased from our inventory be installed and inspected by a qualified gunsmith. Modifying your weapon may be prohibited in your state. Do not modify your sear or hammer engagement surfaces. Before installing please be sure to check all local state and federal laws. By installing this part you agree to take full responsibility for any and all legal, health and warranty consequences that may be incurred.

Download or Print Instructions | Contact: help@mcarbo.com | Page 1

Step 5: Screw the two center set screws in just enough to keep it in place. Then tighten them all down equally snug, and that will complete your installation! Happy Shooting!

Completed