me & aue
TRANSCRIPT
![Page 1: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/1.jpg)
Evaluative Report of Mechanical & Automobile Engineering Department
1. Name of the Department: Department of Mechanical & Automobile Engineering.
2. Year of Establishment: Mechanical Engineering (2004) & Automobile Engineering (2013)
3. Names of Programmes /Courses offered (UG, PG, M. Phil., Ph.D., Integrated Masters; Integrated
Ph.D., etc.):
Program Duration Year of start
B.Tech in Mechanical Engineering 4 years 2004
B.Tech in Automobile Engineering 4 years 2013
M.Tech.in Mechanical Engineering 2 years 2013
4. Names of Interdisciplinary courses and the departments/units involve:
a) Courses/Subjects:
S. No. Names of Interdisciplinary courses/Subjects Departments involved
1 Fundamental of computer programming and Information
Technology
CSE /IT Department
2 Basics of electrical and electronics engineering Electrical Engg. Department
5. Annual/semester/choice based credit system (programme wise): Semester based credit system
6. Participation of the department in the courses offered by other departments:
S. No. Programs offered by
other departments Participation of ME Department
1 B.Tech CSE/IT
Teaching Subjects namely ‘Elements of Mechanical Engineering,
Engineering Drawing and Computer Graphics’.
2 B.Tech ECE
3 B.Tech EE
4 B.Tech Civil
5 B.Tech ELCE
6 B Tech EE Teaching subject ‘Power plant engineering’
7. Courses in collaboration with other universities, industries, foreign institutions etc:
S.
No.
Course Names Industrial Contribution (if any)
1 CAD/CAM
Department of ME has set up a "SIEMENS Centre of
Excellence" at the premises of CTIEMT. Training on SOLID
EDGE software is provided to excel the students in the field of
designing.
8. Details of courses/programmes discontinued (if any) with reasons: NIL
![Page 2: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/2.jpg)
9. Number of teaching posts:
Sanctioned Filled
Professors 05 03
Associate Professors 07 00
Asst. Professors 23 32
10. Faculty profile with name, qualification, designation, specialization,(D.Sc./D.Litt./Ph.D./M. Phil
.etc.):
Sr.
No.
Name Qualification Designati
on
Specialization No. of Years
of Exp.
No. of Ph.D.
students
guided in the
last 4 years
Nature of
employment
1 Dr. Sumit Jain Ph.D Professor Industrial/Product
ion
10 Nil Permanent
2 Dr. Gurudutt
Sahni
Ph.D Professor Mechanical 14 Nil Permanent
3 Dr. P.C. Maity Ph.D Professor Mechanical 35 Nil Permanent
4 Dr. Mandeep
Kaur
Ph.D, M.Sc
(Chem), B.Sc
Assistant
Professor
chemistry 1 Nil Permanent
5 Dr. Amandeep
Bains
Ph.D (
Physics)
Assistant
Professor
Physics(on study
Leave)
5 Nil Permanent
6 Mr. Rahul
Joshi
Ph.D
(pursuing)
Assistant
Professor
Production 14 N/A Permanent
7 Mr. Harjit
Singh
Ph.D
(pursuing)
Assistant
Professor
Industrial 11 N/A Permanent
8 Mr. Jatinder
Kumar
Ph.D
(pursuing)
Assistant
Professor
Production 10 N/A Permanent
9 Mr. Amandeep
Singh
M. Tech Assistant
Professor
Mechanical 4.5 N/A Permanent
10 Mr. Harpreet
Singh
M. Tech Assistant
Professor
Mechanical 9.5 N/A Permanent
11 Mr. Anuraj
Singh
M. Tech Assistant
Professor
Manufacturing 4 N/A Permanent
12 Mr. Satbir
Singh Saini
M. Tech Assistant
Professor
Production 6 N/A Permanent
13 Mr. Punit
Sarwal
M. S Assistant
Professor
Production 3 N/A Permanent
14 Mr. Manpreet
Singh
M. Tech Assistant
Professor
Production 5.5 N/A Permanent
15 Mr. Sanjeev
Kumar
M. Tech Assistant
Professor
Production 4.5 N/A Permanent
16 Mr. Gurpreet
Singh
M. Tech Assistant
Professor
CAD/CAM 1 N/A Permanent
17 Mr. Mandeep
Singh
Ph.D
(pursuing)
Assistant
Professor
Mechanical 1 N/A Permanent
18 Mr. Varinder
Singh
Ph.D
(pursuing)
Assistant
Professor
Thermal 4 N/A Permanent
19 Mr. Vikas
Kumar
M. Tech Assistant
Professor
CAD/CAM 8 N/A Permanent
![Page 3: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/3.jpg)
20 Mr. Mandeep
Kumar
M. Tech Assistant
Professor
Manufacturing 1 N/A Permanent
21 Mr. Harpreet
Singh Bedi
M. Tech Assistant
Professor
Mechanical 1 N/A Permanent
22 Mr.
Amanpreet
Singh
M. E Assistant
Professor
Thermal 3 N/A Permanent
23 Mr. Vikram
Singh Jamwal
M. E. Assistant
Professor
Thermal 2 N/A Permanent
24 Mr. Palwinder
Singh
M.Phil, M.Sc.
(Maths)
Assistant
Professor
Pure Mathematics 9 N/A Permanent
25 Ms. Jaskiran
Kaur
MBA Assistant
Professor
Communication
Skills
2 N/A Permanent
26 Ms. Rashmi M.Sc ,B.Ed,
(Maths)
Assistant
Professor
Pure Mathematics 2 N/A Permanent
27 Mr.
Akashdeep
Goel
M. Tech Assistant
Professor
Mechanical 5 N/A Temporary
28 Mrs. Jasmeen
Kaur
M. Tech Assistant
Professor
Mechanical 5 N/A Temporary
29 Mr. Rupinder
Singh
M. Tech Assistant
Professor
Production 5.5 N/A Temporary
30 Mr. Amninder
Singh
M. Tech Assistant
Professor
Production 2 N/A Temporary
31 Mr. Harkirat
Singh
M. Tech Assistant
Professor
Mechanical
(Welding)
2 N/A Temporary
32 Mr. Surinder
Singh
M. Tech Assistant
Professor
Production 5.5 N/A Temporary
33 Mr.
Harjaskirat
Singh
M. Tech Assistant
Professor
Production 1 N/A Temporary
34 Ms. Rimple M.Phil,
M.Sc.(Maths)
Assistant
Professor
Pure Mathematics 9 N/A Temporary
35 Ms. Binu
Bhanot
M.Sc.
(Chem.)
Assistant
Professor
Inorganic
Chemistry
3 N/A Temporary
11. List of senior visiting faculty:
Year 2015
S.No. Name of visiting faculty Organization Designation
1 Dr. Ranjit Singh BCET, Gurdaspur Associate Professor
2 Dr. R.K. Garg NIT, Jalandhar Professor
Year 2014
S.No.
Name of visiting faculty Vendors Work Profile
1 Ms. Priyanka Cutting Edge, Jalandhar Aptitude Trainer
![Page 4: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/4.jpg)
2 Mr. Akash Winstar Institute of Management &
Technology,Jalandhar. Aptitude Trainer
3 Mr. Simerjit Singh Aspiring Mind,New Delhi Motivational Speaker
4 Mr. V K Khurana Ralson Tyres, Ludhiana. HR
Year 2013
S.No. Name of visiting faculty Vendors Work Profile
1 Mr. Vamsi Career Cafe, Jalandhar Aptitude Trainer
2 Mr. KJS Pannu Milestone 9,Jalandhar Soft Skill
3 Mr. Amit
Xmplar Management solutions Pvt.
Ltd. Noida Soft Skill
4 Ms. Parul Verma Cynosure Soft skill
Year 2012
S.No. Name of visiting faculty Vendors Work Profile
1 Prof Jagdev Singh Bhabha Atomic Research Centre,
Mumbai. Scientist
2 Col Pushpinder Sassy Puma Solutions, Panchkula. CEO
12. Percentage of lectures delivered and practical classes handled (programme-wise) by temporary
faculty: 25.71%
13. Student-Teacher Ratio (programme-wise):
B. Tech (ME & AUE) =1: 14.60
M Tech. (Mechanical Engg.) = 1:4.5
14. Number of academic support staff (technical) and administrative staff; sanctioned and filled:
List of Non- Teaching Staff
Sanctioned Filled
Technical 08 08
Administrative 43
43 (shared)
Qualification details of Technical Supporting Staff:
S.
No
Name of Supporting Staff
(Technical)
Qualification Experience
1 Mr. Iqbal Singh B.Tech in Mechanical Engineering 7 years
2 Mr. Rohit Kumar Diploma in Mechanical Engineering 13 years
3 Mr. Vijay Kumar Diploma in Mechanical Engineering 4 years
4 Mr. Shadi Lal Diploma in Mechanical Engineering 6 years
5 Mr. Navdeep B.Tech in Mechanical Engineering 3.5 years
![Page 5: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/5.jpg)
6 Naveen Kaushik B.Tech in CSE 1 year
7
Mr. Sanjeet Kumar Minhas
Diploma in Mechanical Engineering,
CAD/CAM 12 year 4 months
8 Mr. Jai Gurdip Diploma in Mechanical Engineering 1 year 10 month
List of administrative staff:
Sr.
No. Name Designation
Department/
Section UG PG
1 Mr. Sukdev Singh AO Admin
2
Mr. Puneet
Malhotra Clerk Admin
B.A., Diploma in
Computers, Dip. In
Accounts & Mgt M.A. (Pol. Sc.)
3
Ms. Pawanpreet
Kaur Office Executive Admin B.A M.Sc
4 Ms. Kiran Sharma Receptionist Admin B.A.& B.Ed.
5 Ms. Neetu Sharma Receptionist Admin BA
6 Mr. Joginder Singh Field Officer Admin 10th
7 Mr. Naresh Kumar Accounts Officer Accounts B.Com
8 Mr. Sandeep Rai Cashier Accounts 10+2
9 Mr. Manoj Kumar Accountant Accounts B.Com M.com
10 Mr. Rakesh Kumar Accounts Assistant Accounts
Dip in Comp.
Accountant, B.A MBA
11 Mr. Abhishek Soni Dy. Director CCPC BA, PGDCM
12 Ms. Rajinder Kaur CCPC Executive CCPC BCA MCA
13 Mr. Vishav Kapoor
LEC. & Manager
Industry Interface CCPC B.Tech
M.Tech & MBA
(Pursuing)
14
Mr. RajKumar
Nahar Sanitary Supervisor Civil Wing BA
15 Mr. Arpinder Singh Purchase Officer Civil Wing 10+2
16
Mr. Sukhninder
Singh Maintenance Incharge Civil Wing Under Graduate
17
Mr. Vijay Kumar
Verma Sr. Civil Engineer Civil Wing Dip. In Civil Engg.
18 Mr. Joga Singh Civil Supervisor Civil Wing Graduate
19
Mr. Jagdish K
Chander Store Officer Civil Wing BA
20 Mr. Tarsem Lal Electrical Supervisor Civil Wing BA
21
Mr. Tarlochan
Singh Dy. Estate Officer Civil Wing
Graduation (Military),
FSC
22
Ms. Monika
Chhabra A.P. Counseling BCA MBA
23 Mr. Pankaj Vij Project officer Counseling MBA
24
Ms. Anuradha
Handa Hostel warden Hostel B.A.
25 Mr. Amit Kumar Hostel Supdt. Hostel 10+2
26 Ms. Tripti Gandhi HR Coordinator HR B.Sc. (Eco.) MBA
27 Ms.Dipinti Gill Operation Executive HR B.com M.com
28 Mr. Ankit Mehra Office Executive HR BCA MCA
29 Mr. Deepak Sharma Director
International
Affairs B.Pharmacy MBA
![Page 6: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/6.jpg)
30 Ms. Meenu Dhall Assistant Librarian Library B.Lib. M.Com
31 Ms. Aarti Sharma Library Assistant Library Dip in Lib.
32 Ms. Sarabjit Kaur Library Restorer Library
Dip in Lib., Dip in
System Mgt., B.A
33
Ms. Poonam
Virmani Librarian Library
M.Lib &IS, Ph.D
(Pursuing)
34 Ms. Anu Bala Assistant Librarian Library BA, B. Lib.
M.Lib., PGDCA,
PGDLAN
35 Mr. Satpal DPE Sports BA
36 Mr. Ravi Kumar Gym Instructor Sports 10+2
37 Ms. Geeta Sharma Office Executive Student Section B.A.
38 Mr. Manoj Kumar Asst. Registrar Student Section B.A B.Ed M.A M.Ed
39
Mr. Ram Milan
Yadav Clerk Student Section B.A. M.A.
40 Mr. Kuldeep Singh Transport officer Transport Diploma & B.A.
41 Mr. Pal Singh Transport Asst. Transport
42 Mr. Rashpal Singh Security supervisor Transport
43 Mr. Gurpreet Singh Office Executive Transport B.Sc, M.Sc, M.C.A
15. Qualifications of teaching faculty with DSc/D.Litt/Ph.D/MPhil/PG:
Sr.
No. Name Graduate Post Graduate
Doctorate/Research
degree
1 Dr. Sumit Jain B. Tech. ME M. Tech Ph.D
2 Prof. Gurudutt Sahni B. Tech. ME M. Tech Ph.D
3 Dr. P.C. Maity B. Tech. ME M. Tech Ph.D
4 Dr. Mandeep Kaur B.Sc. (Chem) M.Sc (Chem) Ph.D
5 Dr. Amandeep Bains B.Sc
( Physics)
M.Sc
( Physics) Ph.D ( Physics)
6 Mr. Rahul Joshi B. Tech. ME M. Tech. Production Ph. D Pursuing
7 Mr. Harjit Singh B. Tech. ME M. Tech. Industrial Ph. D Pursuing
8 Mr. Jatinder Kumar B. Tech. ME M. Tech. Production Ph. D Pursuing
9 Mr. Amandeep Singh B. Tech. ME M. Tech. ME -
10 Mr. Akashdeep Goel B. Tech. ME M. Tech. ME Ph. D Pursuing
11 Mr. Harpreet Singh B. Tech. ME M. Tech. ME -
12 Mr. Anuraj Singh B. Tech. ME M. Tech. Industrial -
13 Mr. Satbir Singh Saini B. Tech. ME M. Tech. Production -
14 Mr. PunitSarwal B. Tech. ME M. S -
15 Mr. Manpreet Singh B. Tech. ME M. Tech. Production -
16 Mr. Sanjeev Kumar B. Tech. ME M. Tech. Production -
17 Mr. Gurpreet Singh B. Tech. ME M. Tech. ME -
18 Mr. Mandeep Singh B. Tech. ME M. Tech. ME Ph. D Pursuing
19 Mrs. Jasmeen Kaur B. Tech. ME M. Tech. ME -
20 Mr. Rupinder Singh B. Tech. ME M. Tech. Production -
21 Mr. Amninder Singh B. Tech. ME M. Tech. Production -
22 Mr. Varinder Singh B. Tech. ME M. Tech. Thermal Ph. D Pursuing
23 Mr. Vikas Kumar B. Tech. ME M. Tech. CAD/CAM -
24 Mr. Mandeep Kumar B. Tech. ME M. Tech.
Manufacturing -
![Page 7: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/7.jpg)
25 Mr.Harkirat Singh B. Tech. ME M. Tech. ME -
26 Mr. Surinder Singh B. Tech. ME M. Tech. Production -
27 Mr. Harjaskirat Singh B. Tech. ME M. Tech. Production -
28 Mr. Harpreet Singh Bedi B. Tech. ME M. Tech. ME -
29 Mr. Amanpreet Singh B. Tech. ME M. E (Thermal -
30 Mr. Vikram Singh Jamwal B. Tech. ME M. E. (Thermal) -
31 Mr. Palwinder Singh B.Sc. (Maths) M.Sc. (Maths) M.Phil
32 Ms. Rimple B.Sc M.Sc. M.Phil
33 Ms. Jaskiran Kaur B Sc.(Medical) MBA (Finance and
Marketing) -
34 Ms. Binu Bhanot B.Sc. (Chem.) M.Sc. (Chem.) -
35 Ms. Rashmi B.Sc. M.Sc ,B.Ed -
16. Number of faculty with ongoing projects from:
a. National: No
b . International funding agencies: No
c . Grants received:
i . Received grant from PTU to conduct International Multi-Track Conference on Sciences,
Engineering and Technical Innovations (IMTC 14) on 22nd
–23th
May, 2015
i i . Received grant from DST to conduct International Multi-Track Conference on Sciences,
Engineering and Technical Innovations (IMTC15) on 3rd
– 4th
June, 2014
i i i . Mr. Anuraj Singh got approval of a grant of Rs.60,000 from DST for attending
international conference in USA
iv . Received grant of Rs. 30,000 from PTU to conduct One day National seminar on
“EmergingTrends in Mechanical Engineering” on March 8, 2013.
v . Received a grant of Rs 1.80 lakhs from AICTE to conduct Two Days National Conference
Entitled under RAME on 12-13 Dec 2013 Organized by Department of Mechanical
Engineering, CTIEMT
17. Departmental projects funded by DST-FIST; UGC, DBT, ICSSR, etc. and total grants received
a. International Multi-Track Conference on Sciences, Engineering and Technical Innovations (held
on 22nd - 23rd May, 2015) received a grant of 50,000/- from ISRO and 70,000/- from PTU,
Jalandhar
b. International Multi-Track Conference on Sciences, Engineering and Technical Innovations (held
on 3rd – 4th June, 2014) received a grant of 1,25,000/- from DST & 60,000/- from companies/
business organizations
c. Mr. Anuraj Singh got approved a grant of Rs.60,000 from DST for attending international
conference in USA
18. Research Centre/facility recognized by the University
a. Institute is recognized as ‘PTU Regional Centre’ to offer M. Tech. ME ( Regular & Part-time) &
Ph.D. course work.
b. Center of excellence in association with Siemens has been established in the department for
providing a platform for latest software (SOLID EDGE) training to the students of Mechanical
Engineering Department.
c. Research facility with latest CAD and simulation tools such as ‘SOLIDEDGE ST2’, ‘ANSYS
![Page 8: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/8.jpg)
16.1’, ‘Inventor 2015(AutoDesk)’ is established.
d. Subscription to online research libraries/networks viz. ‘K Nimbus’ ‘IEEE Xplore’, ‘Science
Direct’ and ‘DELNET’ is being provided.
e. M.O.U with NIT-Jalandhar & NIT-Hamirpur for exchange of student/faculty and academic
published material; collaborative research projects and for organizing cosponsored/jointly-
organized seminars, conferences & workshops.
f. Online access to various research databases & Anti-plagiarism tool ‘Turnitin’ is being provided
by PTU to all the faculty members
19. Publications:
A) By Faculty:
a. Publications detail per faculty:
YEAR 2015:
S. No Faculty name Details of Paper (Title, co-authors, journal name, volume, page
no, year) Metrics
No. of
citations
1 Dr. Gurudutt
Sahni
Gurudutt Sahni, Balpreet Singh and Swarndeep Singh “The Effect of
Thermal Stresses on Gate Valve and its Optimization using New Wedge
Design” published in Proceedings of International Conference : IMTC-
2015 , May 22-23,2015 , CTIEMT Jalandhar
-- --
Gurudutt Sahni, Balpreet Singh and Swarndeep Singh “Performance
Techniques for Operability of Regulating Globe Valve And its
Functioning” published in Proceedings of International Conference :
IMTC- 2015 , May 22-23,2015 , CTIEMT Jalandhar
-- --
2 Dr. Mandeep
Kaur
Mandeep Kaur and Amjad Ali “Alkali metal Impregnated Nickel Oxide:
Novel Green Nano Catalyst for Biodiesel Production” European Journal
of Lipid Science and Technology, 117, 550-560, 2015 I.F.= 2.266 2
3 Mr. Harjit
Singh
Harjit Singh , Jatinder Kumar, and Rahul Joshi, ”Mechanical
Characterization of Natural Fiber Composites : An Experimental
Approach” published in Proceedings of International Conference : IMTC-
2015 , May 22-23,2015 , CTIEMT Jalandhar
-- --
Harjit Singh, Anish Sachdeva, Gurpreet Kaur “Benchmarking Internal
Supply Chain performance: Development of a frame work” International
Journal of Mechanical Engineering and Technology (IJMET) Volume 6,
Issue 6, June 2015, pp. 119-126.
-- --
4 Mr. Mandeep
Singh
Mandeep Singh , Sikandar Singh and Varinder Singh ”Effect of Weld
Groove Volume on Tensile Performance of Gas Tungsten Arc welded
Martensitic Stainless Steel” published in Proceedings of International
Conference : IMTC- 2015 , May 22-23,2015 , CTIEMT Jalandhar
-- --
5 Mr. Sanjeev
Kumar
Sanjeev Kumar, Nirmal Singh Kalsi, Amandeep Siingh and Manpreet
Singh ”Comparison of Tool Tip Temperature and Cutting Forces using
Uncoated and AlCrN single layer coated cutting tool Inserts in Turning”
published in Proceedings of International Conference : IMTC- 2015 , May
22-23,2015 , CTIEMT Jalandhar
-- --
6 Mr. Vikas
Kumar
Vikas Kumar, Paramjit Singh ”Effect of Titanium Abrasive Mixed
Electrical Discharge Machining on Wear Ratio of AISI P20 Steel”
published in Proceedings of International Conference : IMTC- 2015 , May
22-23,2015 , CTIEMT Jalandhar
-- --
7 Mr. Vikram
Singh
Jamwal
Vikram Singh Jamwal , Amanpreet Singh, and Pawanjot Singh
”Thermal Comfort Model of a Desert Cooler” published in Proceedings of
International Conference : IMTC- 2015 , May 22-23,2015 , CTIEMT
Jalandhar
-- --
Mr. Varinder
Singh
Varinder Singh , Mandeep Singh and Nishant Bhardwaj “Performance
Investigation of Solar Air Heater Duct having square protrusions as
Roughness Geometry ” published in Proceedings of International
Conference : IMTC- 2015 , May 22-23,2015 , CTIEMT Jalandhar
-- --
![Page 9: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/9.jpg)
Number of papers published in peer reviewed journals (national /international) by faculty for t h e
y e a r 2 0 1 5 : 02
YEAR 2014:
S. No Faculty name Details of Paper (Title, co-authors, journal name, volume, page
no, year) Metrics
No. of
citations
1 Dr. Mandeep
Kaur
Mandeep Kaur, Amzad Ali, “Trans estrification of waste cottonseed oil
using KF Impregnated CaO/NiO as reusable solid catalyst: Reusability
and Kinetics”, published in European Journal of Lipid Science and
Technology, 116. 80-88, 2014.
IF: 2.266 3
Mandeep Kaur, Amzad Ali, “Ethanolysis of waste cottonseed oil over
lithium impregnated calcium oxide: Kinetics and Reusability studies”,
published in Renewable Energy, 63. 272-279, 2014. IF: 2.989 3
2 Mr. Jatinder
Kumar
Jatinder Kumar, Rahul Joshi, “Determination of optimum cutting
parameters for surface roughness and tool flank wear in hard turning by
Taguchi method”, published in International Journal of Research in
Mechanical Engineering, Vol 4, issue 1, April 2014.
-- --
Nischal Chhabra, Surinder Kumar, Jatinder Kumar, “A Review of
Effect of Shielding Gases on Mechanical Properties of Low Carbon Steel
in GMAW Process.” published in Proceedings of Internationional
Conference: IMTC -2014, 3-4 June 2014, CTIEMT, Jalandhar
-- --
Jatinder Kumar, Harjit Singh, Rahul Joshi, “Optimization of multiple
performance characteristics in EDM using Taguchi Method: An
Experimental Investigation”, published in Proceedings of International
Conference: IMTC -2014, 3-4 June 2014, CTIEMT, Jalandhar
-- --
3 Mr. Satbir
Saini
Amandeep Singh Virdi, Satbir Singh saini, “Selecting s best parameters
forr manufacturing motor cycle axle using multi criteria decision
technique(VIKOR Method AHP)”, IJESRT, 2014 -- --
Satbir Singh Saini, Harwinder Lal, Sumit Nagar, “Comparative study of
external supply chain performance of FMCG firms using multi criteria
decision technique (VIKOR Method)” IJAEST, 2014
-- --
4 Mr. Manpreet
Singh
Manpreet Singh, Amandeep Singh Bansal, Sanjeev Kumar, “The Effect
of different wire electrodes on the MRR and MS work piece using
WEDM Process” IJMET,Vol 5,Issue5, May 2014. -- --
5 Mr. Sanjeev
Kumar
Sanjeev Kumar , Manpreet Singh , Amandeep Singh,”Recent
Development in PVD Coatings for High Performance Cutting Tools- A
Review.” published in Proceedings of International Conference: IMTC -
2014, 3-4 June 2014, CTIEMT, Jalandhar .
-- --
6 Mr. Mandeep
Singh
Mandeep Singh, Sikandar Singh, “Effect of Heat Input and Post Weld
Heat Treatment on the Mechanical Properties of GTA Welded AISI 410
SS Joints 178-180 published in Proceedings of International Conference:
IMTC -2014, 3-4 June 2014, CTIEMT, Jalandhar
-- --
7 Prof. Gurudutt
Sahni
Gurudutt Sahni, Balpreet Singh,“To Investigate Stresses and
Deformation Analysis in Skeletomuscular Regions While Sitting
Positions using FEM” published in Proceedings of International
Conference: IMTC -2014, 3-4 June 2014, CTIEMT, Jalandhar
--
--
--
--
8 Mr. Surinder
Singh
Surinder Singh, Poster presentation on “WORK POSTURE
ASSESSMENT IN FORGING INDUSTRY BY REBA METHOD”
published in Proceedings of International Conference: IMTC -2014,
3-4 June 2014, CTIEMT, Jalandhar
-- --
9 Mr. Anuraj
Singh
Anuraj Singh, Paper presented “Ergonomic Investigation of muscular
skeleton disorder in small scale Indian Industry.” In 17th
Annual
ergonomic conference 2014, March 24-27, 2014, USA. -- --
10 Mr. Vikas
Kumar
Vikas Kumar, Paramjit Singh, Gaurav Tejpal “A Review of various
Techniques to improve MRR in Sinking Electrical Discharge Machining”
published in Proceedings of National Conference on Latest Development
in Science , Engineering & Management, 28-29 March 2014, ACET,
Amritsar
-- --
Number of papers published in peer reviewed journals (national /international) by faculty for t h e
![Page 10: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/10.jpg)
y e a r 2 0 1 4 : 06
YEAR 2013:
S. No Faculty name Details of Paper (Title, co-authors, journal name, volume, page
no, year) Metrics
No. of
citations
1 Dr. Mandeep
Kaur
Mandeep Kaur, “published in proceedings of International conference:
Bioenergy, Environment and Sustainable Technologies, 2013, Arunai
Engineering college, Tiruvanamalai, Tamilnadu. -- --
Mandeep Kaur, “published in proceedings of 6th
workshop on Fats and
oils as Renewable Feed Stock for the chemical industry, 2013, KIT
Karlsruhe, Germany. -- --
2 Mr. Jatinder
Kumar
Jatinder Kumar, Rupinder Singh,”investigating the effect of
vulcanization in tread rubber aqpplications” Material Science forum,
Switzerland, Vol 751, pp 1-7, 2013
-- --
Amit Sharma, Himanshu Tripathi, Jatinder Kumar,”analysis of chnage
of mechanical properties in low alloy steel (similiar to a AISI 8740)
friction welded with inconel 718 after heat treatment” IJAET, Vol 4
,issue 1, 2013
-- --
Himanshu Tripathi, Dinesh kumar, Jatinder Kumar,” study of 3D crank
mechanism using asdvance modeling and anlysis technique” Arni
International Journalanagement science and Technology, 2013 -- --
Nimo Singh Khundrakpam, Jatinder Kumar and Gurinder Singh Brar,
“Effect of process parameters on MRR of Wire EDM for EN-8 Steel”
Published in Proceedings of National Conference: RAME -2013, 12-13
December 2013, CTIEMT, Jalandhar
-- --
3
Mr.
Amandeep
Singh
Amandeep Singh, Sanjeev Kumar, Manpreet Singh, ”Free transverse
analysis of uniform beam using MATLAB” Published in Proceedings of
National Conference: RAME -2013, 12-13 December 2013, CTIEMT,
Jalandhar
-- --
4
Mr.
Amanpreet
Singh
Amanpret Singh, Sumit Sharma, T.K. Jindal,” Experimental Study of
horizontal ground heat exchanger” IJMSCE Vol 2, issue 3, 2013 -- --
5 Mr. Mandeep
Singh
Mandeep Singh, Gurpreet Singh “Effect of Weld Groove Volume on
Tensile Performance of Gas Tungsten ArcWelded Martensitic Stainless
Steel (AISI 410 SS) Joints”. Published in Proceedings of National
Conference: RAME -2013, 12-13 December 2013, CTIEMT, Jalandhar
-- --
6 Mr. Harjit
Singh
Harjit Singh, Jatinder Kumar, Harbir Singh, “ A Framework for
Benchmarking Internal Supply Chain Performance” Published in
Proceedings of National Conference: RAME -2013, 12-13 December
2013, CTIEMT, Jalandhar
-- --
Harbir Singh, Harish Kumar, Harjit Singh, “Study of the
musculoskeletal disorders among truck drivers of transport industry in
punjab, india”. Published in Proceedings of National Conference: RAME
-2013, 12-13 December 2013, CTIEMT, Jalandhar.
-- --
Harjit Singh, Arvind Bhardwaj “Bench |Marking internal supply chain
performance using financial data” international conference on production
and industrial engineering at NIT Jalandhar 2013. -- --
7 Mr. Satbir
Singh Saini
Amandeep Singh Virdi, Satbir Singh Saini, Amit Sharma, “Selection for
Best Parameter for Raw Material of an Axle in Motorcycle Using AHP
and Multi Criteria Decision Technique [VIKOR Method]”. Published in
Proceedings of National Conference: RAME -2013, 12-13 December
2013, CTIEMT, Jalandhar.
-- --
8 Mr. Gurpreet
Singh
Gurpreet Singh, Mandeep Singh, “Ultrasonic Guided Waves for
Damage Detection in Cylindrical Geometries for Torsion Damages”
Published in Proceedings of National Conference: RAME -2013, 12-13
December 2013, CTIEMT, Jalandhar.
-- --
![Page 11: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/11.jpg)
9 Mr. Rahul
Joshi
Rahul Joshi, Simeranpreet Singh Gill and Jatinder Kumar “Mechanical
and physical properties of natural rubber and its blend – a review”
Published in Proceedings of National Conference: RAME -2013, 12-13
December 2013, CTIEMT, Jalandhar
-- --
Seema, Darshan Kumar jindal, Rahul Joshi “ Supplier selection and
evaluation : a must for industry” higher education in india: the changing
facet, 2013 -- --
Rahul Joshi, Dr. Simranpreet singh Gill, “ effect of vulcanization process
parameters on mechanical and physical properties of vulcanized SBR -
1502 rubber blend” International conference om AFTMME 2013. -- --
10 Mr. Surinder
Singh
Surinder Singh “A Proposed REBA on Small Scale Forging Industry”
International Journal of Modern Engineering Research Vol. 3, Issue. 6,
Nov - Dec. 2013 pp-3796-3802 -- --
11 Mr. Harpreet
Singh
Harpreet Singh “Improvement In The Corrosion Rate And Mechanical
Properties Of Low Carbon Steel Through Deep Cryogenic Treatment”
International journal of scientific & technology research volume 2, issue
6, June 2013.
-- --
Number of papers published in peer reviewed journals (national /international) by faculty for the year
2013: 05
YEAR 2012:
S. No Faculty name Details of Paper (Title, co-authors, journal name, volume, page
no, year) Metrics
No. of
citations
1 Mr. Rahul
joshi Rahul Joshi, Dr. Simarpreet Gill, “ Optimization of vulcanization in
wind shield weather rubber strip application” IJAET, vol 3, issue 4, 2012 -- --
Number of papers published in peer reviewed journals (national /international) by faculty for the
year 2012: 01
Total Number of publications per faculty:
S.No Name Total no. of publications*
Number of papers published in
peer reviewed journals
(national / international)
2015 2014 2013 2012 2015 2014 2013 2012
1 Prof. Gurudutt Sahni 2 1 0 0 0 0 0 0
2 Dr. Mandeep Kaur 1 2 2 0 1 2 0 0
3 Mr. Rahul Joshi 0 0 3 1 0 0 0 1
4 Mr. Harjit Singh 2 0 3 0 1 0 0 0
5 Mr. Jatinder Kumar 0 3 4 0 0 1 3 0
6 Mr. Amandeep Singh 0 0 1 0 0 0 0 0
7 Mr. Harpreet Singh 0 0 1 0 0 0 0 0
8 Mr. Anuraj Singh 0 1 0 0 0 0 0 0
![Page 12: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/12.jpg)
9 Mr. Satbir Singh Saini 0 2 1 0 0 2 0 0
10 Mr. Manpreet Singh 0 1 0 0 0 1 0 0
11 Mr. Sanjeev Kumar 1 1 0 0 0 0 0 0
12 Mr. Gurpreet Singh 0 0 1 0 0 0 0 0
13 Mr. Mandeep Singh 1 1 1 0 0 0 0 0
14 Mr. Amanpreet Singh 0 0 1 0 0 0 1 0
15 Mr. Surinder Singh 0 1 1 0 0 0 1 0
16 Mr. Vikas Kumar 1 0 0 0 0 0 0 0
17 Mr. Vikram Jamwal 1 0 0 0 0 0 0 0
18 Mr. Varinder Singh 1 0 0 0 0 0 0 0
TOTAL 10 13 19 1 2 6 5 1
Publications by students:
S. No. Student Name Batch Total No. of publications
1 Mr. Shubham Sharma 2011 01
2 Mr. Sahil Arora 2011 01
3 Mr. Rohit Guleria 2011 01
Details of Publications of Students:
1. Shubham Sharma, Amandeep Singh and Mandeep Kuar “Some Studies on Investigating the concept and
Challenges of Green Tribology in Automobile Industry” , IMTC-15, ISBN: 978-81-929077-3-4 (print
version), pp.62-66, 2015
2. Sahil Arora and Rohit Guleria “Solar Sorption Refrigeration Methods ( An Overview of Modern
techniques)” IMTC-15, ISBN: 978-81-929077-3-4 (print version), pp.70-72, 2015
a. Number of publications listed in International Database (For Eg: Web of Science, Scopus,
Humanities International Complete, Dare Database - International Social Sciences
Directory, EBSCO host, etc.): 12
b. Monographs: NIL
c. Chapter in Books: NIL
d. Books Edited: NIL
e. Books with ISBN/ISSN numbers with details of publishers: NIL
f. Citation Index & h-index:
S. No
Faculty Name
Cited By
h-index
1 Dr. Mandeep Kaur 08 02
![Page 13: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/13.jpg)
20. Areas of consultancy and income generated: No
21. Faculty as members in
S. No Name of Faculty
Member
National Committee International
Committee
Editorial Board
1 Rahul Joshi ISTE - -
2 Harjit Singh ISTE - -
22. Student projects:
a. Percentage of students who have done in-house projects including inter
departmental/programme: 100% (part of curriculum)
b. Percentage of students placed for projects in organizations outside the institution i.e.in
Research laboratories/Industry/ other agencies: 100% (part of curriculum)
23. Awards/Recognitions received by faculty and students:
a. 5 students of Mechanical Engineering department received a cash prize of Rs 50,000/- as a Best
Model Award for all categories to their Project HYBRID BIKE in INNOTECH 2012 by Puspha
Gujral Science City, Kapurthala under Registration Number A/E/23.
b. Following students won Best Model Award
S.No Roll No Name Class Sem Batch Remarks
1 81406114020 Mr. Harsimrat Singh ME 8 2008
Best Model Award 2 81406114023 Mr. Kanwarpal Singh ME 8 2008
3 81406114042 Mr. Sukjinder Singh ME 8 2008
4 81406114015 Mr. Gurinder singh ME 8 2008
5 81406114025 Mr. Lakhinder Singh ME 8 2008
6 81406114028 Mr. Manpreet Singh ME 8 2008
c. List of achievers in youth festivals:
S.No Roll No Name Class Sem Batch Event Remarks
1 1241147
Mr. Mahesh
Jangir ME 6 2012 Fine Arts
2nd
position in National Youth
Festival 2015 of All India
Universities held at Indore
2
1141579
Mr. Jasjit Singh ME 7 2011 Group Shabad 2
nd position in PTU Zonal
Youth Festival 2014.
3
1282664
Mr. Damanjit
Singh ME 7 2011 Group Shabad
2nd
position in PTU Zonal
Youth Festival 2014.
4 1282673 Mr. Lakshaya ME 7 2011 Play 2nd
position in PTU Zonal
![Page 14: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/14.jpg)
Kumar Youth Festival 2014.
5
1282664
Mr. Damanjit
Singh ME 7 2011 Vaar Singing
2nd
position in PTU Zonal
Youth Festival 2014
6 1241147 Mr. Mahesh
Jangir ME 5 2012 Fine Arts
1st position in PTU Zonal
Youth Festival 2014.
7 1282673
Mr. Lakshaya
Kumar ME 5 2011 Play
1st position in PTU Zonal
Youth Festival 2013.
1st position in PTU Inter Zonal
Youth Festival 2013.
8 1141631 Mr. Ranjeet
Singh ME 5 2011 Bhangra
1st position in PTU Zonal
Youth Festival 2013.
1st position in PTU inters zonal
Youth Festival 2013.
2nd
position in PTU Zonal
Youth Festival 2012.
9
1141579
Mr. Jasjit Singh ME 5 2011 Indian Music
1st position in PTU Zonal
Youth Festival 2013.
1st position in PTU inters Zonal
Youth Festival 2013.
10
1282664
Mr. Damanjit
Singh ME 5 2011 Indian Music
1st position in PTU Zonal
Youth Festival 2013.
1st position in PTU inters Zonal
Youth Festival 2013.
11 1241147 Mr. Mahesh
Jangir ME 3 2012 Fine Arts
2nd
position in PTU Zonal
Youth Festival 2012.
2nd
position in PTU inters zonal
Youth Festival 2012.
12 1241211 Mr. Gurpreet
Singh ME 3 2012 Literary
1st position in PTU Zonal
Youth Festival 2013.
2nd
position in PTU inters zonal
Youth Festival 2013.
2
nd position in PTU Zonal
Youth Festival 2012.
d. List of achievers in University Merit
S.No Roll No Name Class Sem Batch %age Position
1 1141647 Mr. Shubham Sharma ME
6th B 2011 86%
4th
2 1182406 Mr. Deepak Kochhar ME
7th 2010 86.2%
4th
3 1307325 Mr. Amit Kumar Singh AUE
3rd 2013 74.35%
2nd
4 1307356 Mr. Sourav AUE
3rd 2013 73.29%
4th
5 1307357 Mr. Sukhdev Singh AUE
3rd 2013 67.76%
9th
6 1307355 Mr. Simranjit Singh AUE
3rd 2013 67.65%
10th
e. List of achievers in PTU Inter College Sports meet
S. No. Roll No. Name Class Sem Year Position Event
1 100221129273 Mr.VivekBhati ME 3rd 2011 Silver Cross
Country
2 100221129273 Mr.VivekBhati ME 5th 2012 Bronze Cross
Country
![Page 15: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/15.jpg)
3 100221129273 Mr.Vivek Bhati ME 7th 2013 Bronze Cross
Country
4 100221129294 Mr.Ishant Diwedi ME 7th 2013 Bronze Cross
Country
5 1184801 Mr.Nikhil Choudhary ME 7th 2013 Bronze Cross
Country
6 100221129278 Mr.Geetansh Aggarwal ME 7th 2013 Bronze Cross
Country
7 1141601 Mr.Kailash Chand ME 5th 2013 Bronze Cross
Country
8 1291204 Mr.Gagandeep Singh ME 3rd 2013 Bronze Cross
Country
9 100221129299 Mr.Ravi ME 7th 2013 Bronze Cross
Country
10 1407870 Mr.Lalhmingsanga ME 1st 2014 Gold Basketball
11 1241183 Mr.Amarjot Singh ME 5th 2014 Gold Basketball
12 1407924 Mr.Harjinder Singh ME 3rd 2014 Gold Basketball
13 1407869 Mr.Kulwinder Singh ME 1st 2014 Gold Basketball
14 1241173 Mr.Abhishek Singh ME 5th 2014 Gold Basketball
15 1241204 Mr.Gagandeep singh ME 5th 2014 Silver Cross
Country
16 1241642 Mr.Shamsher Singh ME 5th 2014 Silver Cross
Country
f. 7 students of ME won top positions in “National Student symposium - Managing Innovations in
science & Technology” held at CTIEMT on March 30th – 31st 2015
S.No Name of Student University Roll
No.
Event Position/Award
1 Mr. Sahil Arora 1141638 Paper Presentation Best Paper
2 Mr. Rohit Guleria 1141635 Paper Presentation Best Paper
3 Mr. Gurpreet Singh 1241211 Paper Presentation 1st
4 Mr. Amandeep 1241182 Paper Presentation 1st
5 Mr. Prateek 1307475 Paper Presentation 2nd
6 Mr. Kailash Rawat 1307885 Poster Presentation 1st
7 Mr. Deepak Kumar 1241197 Poster Presentation 1st
24. List of eminent academicians and scientists/visitors to the department:
Sr.
No.
Eminent
Academicians and
Scientists / Visitors
to the Department
Designation University/Institution Purpose
1 Dr. Harpreet Singh Professor IIT, Roop Nagar
Expert talk in two days AICTE
sponsored national conference
“RAME-2013” on 12-13 December
2013.
2 Dr. R.K. Garg Professor NIT Jalandhar
Expert talk in one day seminar
“Emerging Trends in Mechanical
Engineering” on 8 March 2013.
Expert talk in two days AICTE
sponsored national conference
“RAME-2013” on 12-13 December
2013.
Session Chair in international
conference “IMTC 14” on 3-4 June
2014.
![Page 16: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/16.jpg)
Session Chair in international
conference “IMTC 15” on 22-23
June 2014
3 Dr. L.P Singh Professor NIT Jalandhar Expert talk in one day seminar
“Emerging Trends in Mechanical
Engineering” on 8 March 2013.
3 Dr. Subhash Chander Professor NIT Jalandhar Expert talk on “Computational Fluid
Dynamics (CFD)”
5 Dr. Jagdev Singh Professor BCET Gurdaspur
As a mentor for the subjects “HT,
RAC and MV”.
Expert talk in one day seminar
“Emerging Trends in Mechanical
Engineering” on 8 March 2013.
Session Chair in international
conference “IMTC 15” on 22-23
June 2014
6 Dr. Darshan Kumar
Jindal
Associate
Professor
BCET Gurdaspur As mentor for the subjects “Fluid
Mechanics and Fluid Machinery”
7 Dr. Simranpreet Singh
Gill
Assistant
Professor BCET Gurdaspur
Expert talk in one day seminar
“Emerging Trends in Mechanical
Engineering” on 8 March 2013.
8 Dr. Tajeet Singh Associate
professor SBSCET, Ferozepur As mentor for the subject “Strength
of Material”
9 Dr. S. S. Sandhu Assistant
Professor NIT Jalandhar Session Chair in “IMTC 14” on 3-4
June 2014.
10 Dr. Niraj Bala Assistant
Professor BBSBEC, Fathegar Sahib Session Chair in national conference
“IMTC 14” on 3-4 June 2014.
11 Dr. Ranjit Singh Associate
Professor BCET, Gurdaspur
Expert talk on “Energy and
Environment” in International
Conference “IMTC15” on 22nd
-23rd
May 2015
25. Seminars/Conferences/Workshops organized & the source of Funding
a) National
a. Wipro sponsored FDP on “Faculty Empowerment Program” under Wipro Mission 10 x (Level I),
held from March14-18, 2011.
b. Wipro sponsored FDP on “Wipro Mission 10 X Certification Program (Level II) held from March
26-27, 2012.
c. PTU Sponsored One day national seminar on “Emerging Trends in Mechanical Engineering”
on March 8, 2013.
d. AICTE Sponsored Two Days National Conference Entitled under “Recent Advances in
Mechanical Engineering” RAME (12-13 Dec 2013) Organized by Department of Mechanical
Engineering, CTIEMT.
e. PTU sponsored national conference on “Higher education in India: The changing facets” held
at CTIEMT, Jalandhar on 4 – 5th
January 2013.
b) International
a. ISRO & PTU sponsored “International Multi track conference on Sciences, Engineering and
![Page 17: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/17.jpg)
Technical Innovations” held on 22nd
– 23rd
May 2015
b. DST sponsored “International Multi track conference on Sciences, Engineering and Technical
Innovations” held at CTIEMT on 3rd
– 4th
June, 2014
26. Student profile programme/course wise:
Name of the Course/programme
(refer question no. 4) Applications
received
Selected Enrolled
Pass
percentage *M *F
BTECH-ME(2014 - 18) 77 68 68 0 NA
BTECH-ME(2013 -17) 70+56 LEET=126 69+46LEET=105 103 2 NA
BTECH-ME(2012 - 16) 93+51 LEET=144 88+46 LEET =134 134 0 NA
BTECH-ME(2011- 15) 85+29 LEET=114 81+23 LEET =104
101 3 NA
BTECH-ME(2010- 14) 74+25 LEET=99 69+23 LEET=92 92 0 67.39%
BTECH-ME(2009- 13) 89+ 18LEET=107 85+13 LEET=98 98 0 71.42%
BTECH-ME(2008- 12) 55+19 LEET=74 50+15 LEET=65 65 0 78.46%
BTECH- AE(2014 - 18) 25 22 22 0 NA
BTECH- AE(2013 - 17) 33+20 LEET=53 32+17 LEET=49 49 0 NA
MTECH-ME(2013 - 15) 6 5 5 0 NA
MTECH-ME(2014 -16) 4 4 4 0 NA
*M=Male *F=Female
27. Diversity of Students
Name of the Course
%of students from the
same state
% of students from
other States
% of students
from abroad
B.Tech. ME(2014) 80.30% 19.70% -
B.Tech. ME(2013) 88.35% 11.65% -
B.Tech. ME(2012)
80.60% 19.40% -
B. Tech. ME(2011)
75.96% 24.04% -
![Page 18: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/18.jpg)
B .Tech AE (2014)
95.45% 4.55% -
B .Tech AE (2013)
79.6% 20.40% -
M. Tech ME(2014)
100% - -
M .Tech ME(2013)
100% - -
28. How many students have cleared national and state competitive examinations such as NET, SLET,
GATE, Civil services, Defense services etc.
Regd No. Name Batch Remarks
1141595 Mr. Hemant Priyadarshi 2011-2015 Qualified GATE 2015
1141613 Mr. Manish Kumar 2011-2015 Qualified GATE 2015
100221129251 Mr. Lucky Bagga 2010-2014 Qualified GATE 2014
100221129254 Mr. Mathew Samson 2010-2014 Qualified GATE 2014
100221129283 Mr. Ashfaque Ahmad 2010-2014 Qualified GATE 2014
29. Student progression
Student progression
Against % enrolled
2011-15 2010-14 2009-13 2008-12
UG to PG 7.7% 13.09% 9.18% 7.57%
PG to M.Phil. NA NA NA NA
PG to Ph.D. NA NA NA NA
Ph.D.to Post-Doctoral NA NA NA NA
Employed
•Campus selection
•Other than campus recruitment
32.03%
13.59%
30.95%
10.71%
25.51%
12.24%
28.78%
7.57%
Entrepreneurship/Self-employment 1.94% 1.19% 1.02% 0.00%
30. Details of Infrastructural facilities
![Page 19: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/19.jpg)
a) Library
Trade
No of Title of
books
No of books National
Journals
P/I A/I
International
Journals
P/I A/I
E-Journals
ME 373 2392 2 2 2 2
1.DELNET
2.Science Direct
3.K Nimbus
4. IEEE
b) Internet facilities for staff
and students
Internet is provided by Connect and dreamtel with data rate of 40mbps and in labs with
speed of 16kbps
c) Total number of class rooms - 9 well organized classrooms with pleasant ambience;
- Exclusive classroom for each section with seating capacity of 70 to 80;
d) Class rooms with ICT
facility -2 of the classrooms are equipped with ICT facility.
e) Laboratories
- Following well established labs for first common courses are being used:
1) Communication skills
2) Engineering Physics
3) Engineering Chemistry
4) Basic Electrical & Electronics Engineering
5) Fundamentals of computer programming & IT
- 21 well established labs are being used for the core subjects of ME, namely,
1. Engineering Material and Metallurgy lab
2. Strength of Material lab
3. Applied Thermodynamics lab
4. Fluid Mechanics lab
5. Manufacturing processes lab
6. Theory of Machines lab
7. Computer Aided Design and Manufacturing lab
8. Mechanical Measurement and Metrology lab
9. Industrial Automation and Robotics lab
10. Automobile Engineering lab
11. Heat Transfer lab
12. Fluid Machinery lab
13. Refrigeration and Air Conditioning lab
14. Mechanical Vibration lab
15. Computer Graphics lab
16. Internal Combustion Engine lab
17. Automotive Chassis system lab
![Page 20: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/20.jpg)
18. Automotive Electrical Systems lab
19. Vehicle Body Engineering lab
20. Automotive Transmission lab
21. Learning Resource Lab
In CG , CADCAM and Learning Resource lab are equipped with tools
AutoCAD2015, AutoCAD Mechanical 2015, Solid Edge ST2, ANSYS
16.1
31. Number of students receiving financial assistance from college, university, government or other
agencies
S. no. Schemes provided by college/Other
Agencies
Number
of
students
(ME) -
2014
Number
of
students
(ME) -
2013
Number
of
students
(ME) -
2012
Number
of
students
(ME) -
2011
Number
of
students
(AUE) –
2014
Number of
students
(AUE) –
2013
1
B.Tech - AIEEE rank from 40,001 to
70,000 OR PCM marks > 80% upto
85% in 12th--50% tuition fee waiver
3
3 NIL Nil Nil 3
2 B.TECH- LEET (IT/EEE/EE/ECE )--
25% Tuition Fee Waiver
NIL NIL NIL NIL Nil 2
3
B.Tech -AIEEE rank from 70,001 to
10,00,00 OR PCM marks 75% to
80% in 12th--25% tuition fee waiver.
3
3 5 Nil Nil
NIL
4
B.Tech-AIEEE rank up to 40,000
OR PCM marks > 85% in 12th--100%
tuition fee waiver
1 1 NIL Nil Nil 1
5 CTians 25% tuition fee waiver for
any higher courses (if above 60%)
10 Nil 13 4 Nil 2
6 Employees Ward 25% Tuition Fee
Waiver ( If Above 60% )
NIL Nil Nil 1 Nil NIL
7 OBC Post Matric Scholarship
(Punjab)
3 3 9 3 Nil 4
8 PTU Fee Waiver Scholarship 4 4 4 4 1 NIL
9 SC Post Matric Scholarship
(PUNJAB) 3 3 14 5 10 7
10 SC Scholarship Bihar 2013-14 NIL Nil Nil Nil Nil 5
11 Second brother/sister 25% tuition fee
concession. 2 1 2 Nil 1 1
32. Details on student enrichment programmes (special lectures / workshops / Seminar) with external
experts
a. An industrial visit to “Medhaavi Center for Automotive Research Hoshiarpur” is organized for
providing industrial exposure to students of B. Tech AUE 5 on 08th
Aug, 2015.
b. Industrial visit of Mechanical Engineering students at Aarti International, Ludhiana on 06th
Feb, 2015.
![Page 21: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/21.jpg)
c. ACCEPT program is conducted by CCPC for students of all semesters to train them in various areas of
soft skills & aptitude
d. Industrial visit of Mechanical Engineering students at RCF Kapurthala on 23rd
Feb, 2013 and 2nd
March,
2014
e. Industrial visit of Mechanical Engineering students at Monte Carlo, Ludhiana on 03rd Nov, 2014
f. One day workshop on CRDi Technology by Medhavi Centre for Automotive Research on 7 January
2013.
g. “CADMANIA 13” contest to promote skills in computer aided design/drawing focusing on developing
2D/3D views of mechanical components/parts on 29 January 2013.
h. “CADMANIA 14” contest to promote skills in computer aided design/drawing focusing on developing
2D/3D views of mechanical components/parts on 16 October 2014.
i. Two Days National Student Symposium “MIST-15” on 30-31 March ,2015 to encourage the students
for innovations in Science and Technology and to provide the opportunity to discuss their work with
others.
j. Expert talk on “Computational Fluid Dynamics (CFD) by Dr. Subhash Chandra from NIT, Jalandhar.
k. Expert talk on RECENT ADVANCEMENTS IN MECHANICAL ENGINEERING WITH FOCUS ON
NTM by Dr. R. K. Garg (NIT Jalandhar) on 8th
March,2013.
l. Expert talk on ROLE OF HUMAN FACTORS IN MECHANICAL ENGINEERING INDUSTRY by
Dr. L.P. SINGH (NIT Jalandhar) on 8th
March,2013.
m. Expert talk on FUZZY LOGIC IN ENGINEERING SYSTEM by Dr .Jagdev Singh (BCET Gurdaspur)
on 8th
March,2013.
n. Expert talk on CRYOGENIC TREATMENT OF CUTTING STEEL by Dr. Simranpreet Singh Gill
(BCET Gurdaspur) on 8th
March,2013.
33. Teaching methods adopted to improve student learning
a. Before formal commencement of class room teaching, students are made to undergo ‘The Orientation
Programme’ in order to make them aware with:
1. Study Scheme
2. Curriculum Details
3. Key Position Holders
4. Anti Ragging Committee Members (Contact no. and Email ID’s)
5. Women Grievance Cell (Contact no. and Email ID’s)
6. Rules and Regulations of College.
b. The department makes its academic calendar for every academic session .This calendar is followed strictly to
meet every goal in time .The calendar is attached here with.
c. The Department provides college outlines and course schedules prior to the commencement of the academic
session. The schedule is as listed in the academic calendar.
d. B. Tech (Mechanical Engineering) predominantly follow the lecture method. Apart from classrooms ,the
Industrial visits are organized for the better experience of the students
e. The PDP (Personality Development Programs) are organized. Group Discussion, Role play events are organized
for the students for making learning more efficient.
f. Nimbus program is set up by the department to provide the teaching material to the students study anytime
anywhere through e- learning.
g. Advisers for each class are appointed to guide every student in every possible way, for the better growth of the
students.
h. All the teachers are evaluated by the students on basis of the teaching, way of interactions, and knowledge of the
teacher. After the results, required actions are taken.
34. Participation in Institutional Social Responsibility (ISR) and Extension activities
A Seven Days NSS Camp Was Organized at CT Institute of Engineering, Management & Technology in
Co-Ordination with PTU during 26/02/2013 To 04/03/2013. The main agenda of this camp was “Cancer &
![Page 22: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/22.jpg)
Hepatitis Awareness” in the villages near by Jalandhar.
More than 300 students participated in this camp; from CT Group of Institutions and different
institutions/colleges of Punjab.
Students of CT Institutions and various colleges affiliated to Punjab Technical University visited the nearby
village Pholariwal and made the villagers aware by street play at Pipal Chowk of village about the
destructive effects of drug addiction and told them how to prevent such damages under the aegis of Seven
Days NSS Camp On “Hepatitis And Cancer Awareness” organized by CT Group Institutions in
collaboration of Punjab Technical University, Kapurthala.
S.
No.
Name of the Student (with Registration
Number)
Activity
attended
Organizing
Institute/
Department
Theme of the Event Duration
with Dates
Name Roll No
1 Mr. Rahul Raj 1241241
SE
VE
N D
AY
S N
SS
CA
MP
CT
IEM
T
HE
PA
TIT
IS &
CA
NC
ER
AW
AR
EN
ES
S
SE
VE
N D
AY
S
26
TH
FE
B,
20
13
TO
4T
H M
AR
CH
, 2
01
3
2 Mr.Deepak Kumar 1241197 3 Mr. Zahid Iqubal 1241269 4 Mr. Sandeep 100221129315 5 Mr. Manish Kumar 100221129301 6 Mr. Shivam Kumar 1141644
7 Mr. Rahul Jasrotia 1141629 8 Mr. Ashwarya
Sharma
1241194
9 Mr.Gopal Kumar 100221129289 10 Mr. Ishant 100221129294 11 Mr. Sajan 100221129314 12 Mr. Ashfaque 100221129283 13
Ms. Drishti 1141582
14 Mr. Rahul Kumar 100221129311 15 Mr. Ayushranjan 100221129284 16 Mr. Mayank Kumar 1141988 17 Mr. Manish 1141613 18 Mr. Hemant 1141595 19 Mr. Sanchit 1241559 20 Mr. Ankit 1241518 21 Mr. Ritesh 1141634
22 Mr. Gurpreet 1241212 23 Mr. Jasbir 1307634 24 Mr.Guneet Singh 1241208 25 Mr. Richi 1241246 26 Mr. Geetansh 100221129247 27
Mr. Vishal Sagar 1307911
7 D
AY
S N
SS
CA
MP
C
TIE
MT
EN
VIR
OM
EN
TA
L A
WA
RE
NE
SS
28 Mr. Sidharath 1241254
![Page 23: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/23.jpg)
29 Mr. Gaurav
Pangotra
1182407
AS
ER
-
ED
UC
AT
ION
AL
CA
MP
CT
IEM
T
ED
UC
AT
ION
AL
SU
RV
EY
FIV
E D
AY
S
OC
TO
BE
R 3
–
OC
TO
BE
R 7
,
20
13
30 Mr. Harmanpreet
Singh
100221129248
31 Mr. Mohit Paul 100221129256 32 Mr. Amit Kumar 100221129277 33 Mr. Geetansh 100221129247
34 Mr. Ishant Diwedi 100221129294
35 Mr. Paramjit Singh 1308380
AS
ER
-ED
UC
AT
ION
AL
CA
MP
CT
IEM
T
ED
UC
AT
ION
-AL
SU
RV
EY
FIV
E D
AY
S
SE
PT
EM
BE
R 2
3 -
SE
PT
EM
BE
R 2
7, 2
01
4
36 Mr. Gourav Sharma 1241207
37 Mr. Pardarpan 1353753
38 Mr. Ujjwal sagar 1307675
39 Mr. Jasbir Singh 1307634
40 Mr. Chandramani
Kumar
1307619
41 Mr. Devdeep
Bhanot
1241199
42 Mr. Ajay Kumar 1241177
43 Mr. Amandeep
Singh
1241182
44 Mr. Guneet Singh 1241208
45 Mr.Gurpreet Singh 1241212
46 Mr. Richi Singh 1241246
47 Mr. Ashwani
Kumar
1307870
48 Mr. Sahil Sood 1241249
49 Mr. Shubham 1307354
50 Mr. Anmol Singh 1307326
51 Mr. Keshav Sharma 1307886
52 Mr. Rajinder Singh 1307657
53 Mr. Rahul Sharma 1241242
54 Mr. Puneet 1241240
55 Mr. Amritpal Singh 1241187
35. SWOC analysis of the department and Future plans Strengths:
a. A very dedicated, dynamic and self motivated faculty and staff.
b. All faculties have excellent academic backgrounds.
c. Good infrastructural facilities including well equipped labs, library and IT facilities.
d. The Mechanical Engineering program combine classroom and laboratory learning in technical areas
with a broad curriculum and industry assignments to impart an Excellent Education.
![Page 24: ME & AUE](https://reader031.vdocument.in/reader031/viewer/2022013120/586b80991a28abf6518b61ad/html5/thumbnails/24.jpg)
e. MOU with Texas Instruments
Weaknesses:
a. A few students deficient in certain aspects like communication skills, poor academic and social
backgrounds.
b. Lack of awareness among students regarding current technology.
c. Students having a habit of being spoon-fed.
Opportunities:
a. A good exposure and support to faculty for self development through FDPs, Seminars, STTPs etc
b. Motivation for research work (students as well as faculty).
c. Membership with technical bodies like ISTE etc.
Challenges:
a. Competition due to mushroom growth of engineering institutes locally and globally.
b. Admissions of good quality and quantity of students.
c. Declining job opportunities for ME in the region.
Future plans of the department:
a. Improve the process of teaching and learning through continuous assessment.
b. Recruit, nurture and retain outstanding students and faculty.
c. Promote active learning as per Wipro mission 10X.
d. Focus more on research and other activities to resonate with the current wavelength of today’s fast
growing world.