mechanical face seals
TRANSCRIPT
SAP PARTS• SAP Part is a Manufacturer, Designer and Supplier of
technologically enriched and specially designed Mechanical Face Seal/ Floating Seals and Special surface treated Products for Construction, Mining, Defense, Transmission, and Agriculture Equipments.
• SAP Parts is a leading manufacturer and exporter of Mechanical Face Seals established in 2009 in Pune, India.
• SAP Parts is a leading manufacturer and exporter of Mechanical Face Seals established in Pune, India.
Why SAP PARTS Seals• Corrosion Resistant.• Higher operational life.• Precision Lapped seals.• No micro-fine scratches.• Wear Re-countering Design.• Minimum face load variations.• Self-renewing sealing surfaces.• Special Seal and O - Ring materials.• Suitable for Heavy Duty Applications.
Mechanical Face Seals• Mechanical face Seals are designed
to be employed in most abusing working conditions, accepted worldwide to use in extremely harsh environments under enormous stresses, sand, dirt, mud, dust and earth material.
• SAP PARTS™ branded Mechanical Face Seals have been used by OEMs and Users of Seals with outstanding success in Construction Equipments, Transmission Drives, axles, Rollers and Argo machineries.
Types of Mechanical Faces SealsO Ring ( DO Type) Trapezoidal Torric
Rings (DF Type)
O Ring ( DO Type)• The DO type Mechanical Face Seal consists of two identical
metal face seals and two rubber O - rings placed on the Ramp profile of the metal seal.
• The SAP PARTS ™ Seals comes in two material versions Alloy cast iron and Alloy Forged Steel grades.
• At Seal assembly the o-rings are compressed between the tapered contact surfaces of the seal ring and housing.
Trapezoidal Torric Rings (DF Type)
• The Mechanical Face Seal of DF Type consists of two metallic angular seal rings with identical geometrical profiles.
• The seal rings are assembled with trapezoid rubber rings which are placed in the particular housing bore.
• The geometry of the housing profile is comparatively easier to produce and the seal installation does not require an installation tool.
• SAP has few unique designs extremely suitable for demanding applications and adverse operating condition.
• SAP PARTS not only offers “off-the-shelf” designs its engineering team is also available to work with your engineers to design ‘non-standard’ metal face seals. Whether developing a new seal size or type to fit your application, or utilizing a new metal seal or O-Ring material, SAP PARTS engineers have the experience necessary to design, procure and test these concepts and follow them to production.
Contact UsADDRESS
85, B.U. Bhandari Indl.Estate, Off John Deere, Nagar Road,Sanaswadi,
Tal. Shirur Dist. Pune- 412 208 Maharashtra, INDIA.
Contact No. : 9561562957
http://www.sapparts.com/
THANK YOU