metal ceilings range - system building products...metal ceilings introduction the burgess by...

The information provided in this leaflet is based on the standards and product data available at the time of publication. Any product or performance warranties or guarantees provided, expressed or implied, are subject to the installation of complete Burgess By System product systems, the exclusive use of our system components and the installation of those systems in accordance with our recommendations.

+44 (0)1455 618 [email protected]

www.systembuildingproducts.com

Metal Ceilings Range Accomplished metal ceiling systems that combine style, quality and high-performance.

1

Metal Ceilings IntroductionThe Burgess By System' name has been synonymous with quality engineered metal ceilings since the 1950s. Metal ceilings are manufactured in Hinckley in compliance with BS EN ISO 9001 quality and BS EN ISO 14001 environmental Management Systems.

The unique “Pip & Stop” feature on our patented clip-in system ensure easy installation and levelling.

A wide range of perforations, edge profiles, panel sizes and colour offers complete freedom tospecifiers and clients.

Burgess By System's metal ceilings are the only system to come with approved health sector antibacterial resistance finishes as an option.

Specific solutions for secure ceilings, corridors, external canopies and curved ceilings can all be catered for within the standard range.

High-quality powder-coated steel panels ensure longevity and durability while maintaining impressive aesthetics.

2



www.systembuildingproducts.com

1. Metal Ceilings Range Index

page

Concealed Clip-In 4 - 5Clip-In A-Bar 6 - 7Healthcare 8 - 9Security 10 - 11Hook-On 12 - 13Grille Tile 14 - 15External 16 - 17Swingdown 18 - 19Access Panels 20 - 21

ExposedLay In 22 - 23Tegular 24 - 25Linear Blade System E 26 - 27Modular Beam 28 - 29Open Cell Ceilings 30 - 31Mesh Ceilings 32 - 38

Semi Concealed Linear Beam 39 - 40

Bespoke DesignCurvatura 41 - 42Metalflair 43 - 44Metal Baffles 45 - 46Special Finishes 47Perforation Patterns 48 - 49Clip-In Wall Panels 50 - 51Nilgrid 52 - 53

3

Clip-In

4

Edge Details

Tile Size300 x 300

600 x 300

600 x 600

900 x 300

1200 x 300

1200 x 600

1500 x 300

1800 x 300

2400 x 300

750 x 750

500 x 500

24”x 24”

A B C D F

Acoustic / Insulation Pad(optional)

Clip-In Tile

GT 115Full Tee Bar

GT 109 Bracket

1500 maximumcentres

1500 maximumcentres

300maximum

fromperimeter

M6 Fixing orEquivalent

GT 112Suspension Channel

GT 114SuspensionAngle

300 maximumfrom

perimeter

Installation Diagram

Type ‘A’ Tile5mm Bevel edges to all sides

2545 Length

Width

2545

Type ‘B’ TileBevel edges longitudinally,square edges on end

Length

Width

1939

Type ‘C’ Tile Square edges to all sides

Length

Width

2545

Type ‘D’ Tile Square edges to all sides

Length

Width

2545

Type ‘F’ Tile2mm Bevel edges to all sides

Length

Width

GT109Universal Bracket

45

83

29

45

35

Tile Module

19


GT 115FullTeebar

Type ‘A’ Clip-In Tile

29

38

83

5

5

w up to 1.00*

Up to Class A*

NRC up to 0.10 - 1.00*

Dnfw

/Dncw

26-42dB

A2-s1, d0 (BS EN 13501-1)

Please contact technical sales for

further information

Circa 9kg/m²

None without additional measures

Dust or vacuum with clean soft brush

Wipe with clean damp sponge

Tiles are demountable

Recyclable

Warranty available

* Performance is dependent on perforationand infill

Clip-In



www.systembuildingproducts.com5

Clip-In A Bar

6

Edge Details

Tile Size

600 x 300600 x 600

1200 x 300

1200 x 600

1500 x 300

500 x 500

A

Product No. GT 180

Description:

3600mm long ‘A’ bar

16.4mm wide x 38.5mm

deep rigidised steel.

Unit Weight:1.7kg

Product No. GT 181

Description:

‘A’ bar coupler 100mm long

x 22mm deep 0.55mm

galvanised steel.

Unit Weight:0.02kg

Product No. GT 183

Description:

‘A’ bar suspension bracket

50mm wide x 53.5mm high

x 40.5mm drop, 1.2mm

galvanised steel.

Unit Weight:0.02kg

INSTALLATION DIAGRAM

COMPONENT PARTS

GT112

GT183

GT180

1500mm x 1500mm

Description:

3000mm long suspension

channel, 38 x 19 x 1.6mm

galvanised mild steel.

Unit Weight:2.5kg

Product No. GT 137

Description:

Extractor tool type 3. Spring

steel blade with wooden

handle.

92

16

w up to 1.00*

Up to Class A*

NRC up to 0.10 - 1.00*

Dnfw

/Dncw

26-42dB

A2-s1, d0 (BS EN 13501-1)


further information

Circa 9kg/m²





Recyclable

Warranty available

* Performance is dependent on perforationand infill

Product No. GT 113

Description:

Suspension channel coupler

152mm long pre-drilled with

two 7mm diameter clearance holes

35 x 16 x 1.2mm galvanised

mild steel.

Unit Weight:0.1kg

Product No. GT 114

Description:

3000mm long suspension

angle 19 x 19 x 0.8mm

galvanised mild steel.

Unit Weight: 0.55kg

2554 Length

Width


Clip-In A Bar




Healthcare

8

w up to 1.00*

Up to Class A*

NRC up to 0.10 - 1.00*

Dnfw

/Dncw

26-42dB

A2-s1, d0 (BS EN 13501-1)


further information

Circa 9kg/m†





Recyclable

Warranty available

* Performance is dependent on perforation

Our Healthcare range of tiles are protected witha powder coating technology that has advancedanti-bacterial qualities.

The metal range with the incorporation of healthcare coating offers the opportunity to specifyproducts into hygiene conscious environments,which will give 24 hour protection against thegrowth of a wide range of micro-organismsthroughout the lifetime of the product.

• Protection against E-coli• Salmonella• Listeria• Legionella• Pseudomonas• MRSA

C

M

Y

CM

MY

CY

CMY

K

Burgess_Catalogue 15.pdf 1 07/02/2018 18:56

Healthcare




Security

10

Grid details as Clip-In exterior ceilings

Security clip GT1071 hooks into the four adjoining tiles at corner locations and secures tiles to grid over the tee bars GT115

45

83

29

Tile Module

GT 1071Security clip


Edge Details

Tile Size A

500 x 500

600 x 600

1200 x 600


2545 Length

Width

w up to 1.00*

Up to Class A*

NRC up to 0.10 - 1.00*

Dnfw

/Dncw

26-42dB

A2-s1, d0 (BS EN 13501-1)


further information

Circa 9kg/m†)





Recyclable

Warranty available


We only recommend the use of our Tee Barfor this system. Each piece of our Tee Bar isidentified as such on the rear face.

Security




Hook-On

12

GT112 Suspension

channel 38mm x 19mm

38mm deep Zed Bar

suspension

GT114 maximum

1500mm x 1500mm

centres


Variable

TILE SIZES

A wide range of sizes from 300 to 600mm

wide x 600 to 2400mm length.

w up to 1.00*

Up to Class A*

NRC up to 0.10 - 1.00*

Dnfw

/Dncw

26-42dB

A2-s1, d0 (BS EN 13501-1)


further information

Circa 9kg/m†)





Recyclable

Warranty available


Hook-On




Grille Tile

14

2545 Length

Width

TYPE ‘A’ TILE5mm Bevel edges to all sides

Edge Details

Tile Size A

600 x 600

1200 x 600

GT114 hangers at1500mm maximumcentres in eitherdirection

Grid components detailson pages 20 & 21

GT109

GT112

GT115

Normal tile

Grille tile

The Clip-In Grille Tile has been developed for use in ventilated ceilings for the supply or extraction of large volumes of air where standard perforated tiles are inadequate. Grille Tiles are available in a range of module sizes and colours. The tiles have a standard border of 53mm and contain a central 13mm cell louvre retained in


Grille Tile




External

16

1: 23

External

Clip-In Tile

GT 115

GT 109 Bracket

1200 maximumcentres 300

maximumfrom

perimeter

M6 Fixing orEquivalent



300 maximumfrom

perimeter

GT 1071Security Clip

1200 maximumcentres

45

83

29

Tile Module

GT 1071Security clip

PVC Plastisol coatingto tiles*


We only recommend the use of our Spring Tee

for this system. Each piece of our Spring Tee is

2545 Length

Width


Edge Details

Tile Size A

500 x 500

600 x 600

1200 x 600

w up to 1.00*

Up to Class A*

NRC up to 0.10 - 1.00*

Dnfw

/Dncw

26-42dB

A2-s1, d0 (BS EN 13501-1)


further information

Circa 9kg/m²)





Recyclable

Warranty available


External




Swingdown

18

SwingdownINSTALLATION DIAGRAM

1500 maximumcentres

1500 maximumcentres

300 maximumfrom

perimeter

300 maximumfrom

perimeter

GT 109UniversalBracket

GT 115Full Tee Bar


GT 112SuspensionChannel

Insulation pad(optional)

19GT112SuspensionChannel

GT 115Full Tee Bar

29

38

AcousticInlay tabbedin position(optional)

Note:When swinging tile into vertical position thetile should be slid along the tee bar awayfrom the adjacent tile to avoid interference.

GT109Universal Bracket

45

83

29

45

35

We only recommend the use of Burgess CEP Tee Bar for this system.Each piece of Burgess Tee Bar is identified as such on the rear face.

Edge Details

Tile Size600 x 300

600 x 600

1200 x 300

1200 x 600

1500 x 300

750 x 750

500 x 500

A F

2545 Length

Width

Type ‘F’ Tile2mm Bevel edges to all sides


2545 Length

Width

w up to 1.00*

Up to Class A*

NRC up to 0.10 - 1.00*

Dnfw

/Dncw

26-42dB

A2-s1, d0 (BS EN 13501-1)


further information

Circa 9kg/m²





Recyclable

Warranty available


Swingdown




Access Panel

20

Access panel

Access Panel

2545 Length

Width


Edge Details

Tile Size A

600 x 600

1200 x 600

Tiles can pivot on

either 1200mm or

600mm edge

Access Panels are manufactured to resemble the main ceiling panels both in respect to size and edge detail. They are used in locations where security tiles are employed or where regular access to the ceiling void is necessary for electrical or mechanical services. The panels are manufacturedwith reinforced frames that provide rigidity to thepanel whilst permitting the panel to hinge down for access to the ceiling plenum. Access Panelsare fitted with locking devices to retain the panel in the ceiling and prevent unauthorised access.Locks can be operated with a square shanked key(budget locks) or, in particularly sensitive areas such as police stations or prisons, the locks can bekey operated (Yale Type).

Access Panel




Lay-In

22

Lay-In

Module Size Grid Width

600 x 600

1200 x 600

24

24

38

24

The term Lay-In refers to tiles that have minimal tile face coverage by the supporting exposed grid as distinct from lay-on tiles where the face of the tile is fully visible. Lay-In Tiles are used with an exposed grid table usually 24mm wide although different grid table widths are available.

Where Lay-In perforated tiles are required it is recommended that the supported edges of the tile are perforated and the unsupported edges (usually the long sides) have plain borders. This arrangement provides the appearance of a plain border edged tiled ceiling with the exposed table grid providing the border on the supported edges. The grid is supported by GT114 hangers at 1200mm maximum centres in both directions.

EDGE DETAILS

SIZES AVAILABLE

w up to 1.00*

Up to Class A*

NRC up to 0.10 - 1.00*

Dnfw

/Dncw

26-42dB

A2-s1, d0 (BS EN 13501-1)


further information

Circa 7.2kg/m²





Recyclable

Warranty available


Lay-In




Tegular

24

Tegular

Hanger

Tegular tile

Exposed grid

Tile module

Tile module

1200 maximumcentres

300maximum

fromperimeter

1200 maximumcentres

600

585 (nom) 15

Lay-In tileSquare edge tile

Standardsuspensiontee

8

250min

600

575 (nom) 24

19

Square edge tile

Standardsuspensiontee

Lay-In tile

Bevel edge tile16

15

38

GT 119

GT 120

Edge Details

ModuleSize

Tile FaceSize (nom)

600 x 600 575 x 575

575 x 575

575 x 575

585 x 585

585 x 585

485 x 485

475 x 475

735 x 735

485 x 485

600 x 600

600 x 600

600 x 600

600 x 600

500 x 500

500 x 500

500 x 500

750 x 750

TileDepth

GridWidth

A C

19 24

16 24

8 24

24

8 15

16 15

16

16

16

15

15

15

8


w up to 1.00*

Up to Class A*

NRC up to 0.10 - 1.00*

Dnfw

/Dncw

26-42dB

A2-s1, d0 (BS EN 13501-1)


further information

Circa 7.2kg/m²





Recyclable

Warranty available


Tegular




Linear BladeSystem E

26

A2-s1, d0 (BS EN 13501-1)


further information

Circa 4.5kg/m²





Recyclable

Warranty available


Linear Blade System ELinear Blade System Ecomprises blade shaped ceilingprofiles that are hung verticallyfrom the suspension to form anopen screen linear perspectiveinterior ceiling. Made fromsteel, the blades can be suppliedup to 200mm deep (100mmbeing the standard depth) andare clipped to the carrier at50mm min. modules. It can beseen that Linear Blade System Eoffers provision for air movementthrough the ceiling, or smokeextraction from the void area.The system is particularly suitedfor use in open areas in buildingssuch as airports or shopping malls.

Linear Blade System E




35

Bristol and West

Modular Beam

28

Modular Beam

Beams available in widthsfrom 100mm to 300mm

Up to 1600mmrecommended

maximum module

Up to 1600mmrecommended

maximum module

Typical layouts

GT114 hangers at1500mm maximumcentres in bothdirections

Main beams

GT112 at 1500mmmaximum centres

Cross beamsor noggins


The Modular Beam Grid system combines design flexibility with a highly engineered ceiling system.The beam sections are used to support the ceilingpanels/planks as well as allowing the integration ofa range of service elements. The main beams areinstalled parallel with plain cross noggins runningbetween them to form a modular grid ceiling.Beams can be manufactured in a number of widthsand used to create module sizes of up to 1500x 1500mm. Modules can be infilled with eithera single panel or a number of smaller planks.Where required large panels can be supplied withhinges, mechanical latches and restraining wires tofacilitate ease of access.

w up to 1.00*

Up to Class A*

NRC up to 0.10 - 1.00*

Dnfw

/Dncw

42dB*

A2-s1, d0*

B-s1, d0*

BS EN 13501-1

Circa 9kg/m²




Tiles/planks are demountable

Recyclable

Warranty available


Modular Beam




Open Cell Ceilings

30

DIMENSIONS

30

5151

50

5151

40

5151

55

35

b15 h30

b15 h50

b15 h40/55 (Acoustic Fleece Application)

40

5151

4242

b24 h35

Acoustic Fleece

yx

h

b1

5 h

50

x y h

50 50 50

60 60 50

66 66 50

75 75 50

86 86 50

100 100 50

120 120 50

150 150 50

200 200 50

b1

5 h

40

/55

x y h

50 50 40

60 60 40

66 66 40

75 75 40

86 86 40

100 100 40

120 120 40

150 150 40

200 200 40

b1

5 h

30

x y h

50 50 30

60 60 30

66 66 30

75 75 30

86 86 30

100 100 30

b1

5 h

35

x y h

100 100 35

120 120 35

150 150 35

200 200 35

300 300 35

Open Cell Panels can come in a variety of cell sizesand depths and are available in most RAL coloursThey can also be made with a wood appearance.Panels can be installed onto and demounted easilyfrom Burgess By System EX24 and EX15 suspensionsystems. Panels are usually supplied unassembledbut can also be supplied assembled if requested.

Open Cell Ceilings




Mesh Ceilings

32

THE PRODUCTION PROCESS

Sheets or coils of metal are fed into

the expanding machine.

WHAT MAKES MESH UNIQUE?

The machines are then programmed or

manually controlled to expand the metal

to exact specification.

Using the unique shearing and stretching process

means very little waste is created. The metal is

sheared and then stretched in a single

process creating the apertures and

therefore expanding the metal. The mesh

is then formed into one of our many ceiling

systems and finished with our factory applied

polyester powder coating.

STEP 1

STEP 4

STEP 2

STEP 3Green

EngineeringZero waste

Unlimited patterns, to exactlly match

your design

Mesh CeilingsThe Burgess By System range of Mesh Ceilings willprovide a rustic and industrial look to complimentyour interior designs.

Choose from an almost infinite number of styles,hole sizes, sheet thicknesses and colour finishes tocreate a truly stunning metal ceiling system.

Traditional Expanded Metal Mesh is basically a sheet

of metal with diamond shaped holes. The holes are

produced by using an ‘expanding machine’, which

uses a pressured slitting and stretching process

to transform solid metal sheets and coils into

beautifully finished, expanded metal mesh.

Due to the decorative patterns being created by the

slits and stretching, there is zero waste generated.

The process for expanding metal was first patented

in Hartlepool, UK in the 1880’s and despite the

amount of time which has elapsed since then,

the process remains true to the original idea. The

process is simple but incredibly effective...

Each machine is fitted with a unique “knife”,

designed to create a particular pattern.

Mesh Ceilings




COLOURSAvailable in any

RAL colour Patterns

220 223 203 204 205/206 207

208 209 210 215 199 0798

1292 1294 1295

15951576

1196/1199

1298/1299 1597/1598 1296/1297

2088 2089 2091

20972093 2094/2096

3092/3093

3095

3098

3398

4095/4097/4099

All of our Steel Meshes are made from a variety of grades. The most common grades are Hot Rolled, Cold Reduced,

Electro Zinc and Galvanised Steel. All materials can be coated using various applications, i.e. galvanising, painting,

powder coating, etc. All Steel grades supplied conform to the relative quality standards.

34

220 5.84mm 3.50mm 0.60mm 55

221 5.84mm 3.39mm 0.60mm 31

223 5.84mm 3.50mm 0.60mm 10

203 10.24mm 5.64mm 0.60mm 72

204 10.24mm 5.64mm 0.60mm 59

205 10.24mm 5.64mm 0.60mm 45

206 10.24mm 5.64mm 0.75mm 59

207 10.24mm 5.64mm 0.75mm 45

208 10.24mm 5.64mm 1.00mm 59

209 10.24mm 5.64mm 1.00mm 45

210 10.24mm 5.64mm 1.20mm 59

215 10.24mm 4.76mm 1.00mm 36

199 14.29mm 5.64mm 1.00mm 59

0798 19.05mm 7.43mm 1.00mm 54

1196 28.58mm 9.52mm 1.20mm 58

1199 28.58mm 9.52mm 1.00mm 65

1292 30.48mm 13.86mm 2.50mm 25

1294 30.48mm 11.72mm 1.60mm 60

1295 30.48mm 11.72mm 1.60mm 66

1296 30.48mm 11.72mm 1.20mm 60

1297 30.48mm 11.72mm 2.06mm 65

1298 30.48mm 11.72mm 2.06mm 72

1299 30.48mm 11.72mm 1.20mm 80

1576 38.10mm 16.93mm 3.00mm 44

1595 38.10mm 16.93mm 1.60mm 64

1597 38.10mm 16.48mm 1.60mm 73

1598 38.10mm 16.93mm 1.20mm 73

2088 50.80mm 22.58mm 3.00mm 66

2089 50.80mm 22.58mm 3.00mm 72

2091 50.80mm 22.58mm 2.50mm 78

2093 50.80mm 22.58mm 1.60mm 73

2094 50.80mm 22.58mm 1.60mm 80

2096 50.80mm 22.58mm 1.20mm 79

2097 50.80mm 22.58mm 1.60mm 86

2499 60.96mm 24.38mm 1.60mm 82

3092 76.20mm 33.87mm 3.00mm 79

3093 76.20mm 33.87mm 2.50mm 83

3095 76.20mm 33.87mm 3.00mm 77

3098 76.20mm 33.87mm 3.00mm 84

3396 85.73mm 40.64mm 3.00mm 84

3398 85.73mm 39.33mm 2.50mm 87

4095 101.60mm 45.65mm 3.00mm 81

4097 101.60mm 50.80mm 3.00mm 87

4594 114.30mm 36.33mm 3.00mm 84

4595 114.30mm 40.64mm 4.50mm 53

4596 114.30mm 40.64mm 4.50mm 61

4597 114.30mm 40.64mm 4.50mm 71

4598 114.30mm 40.64mm 3.00mm 69

4599 114.30mm 39.33mm 3.00mm 77

Details - RaisedDetails - Raised




COLOURSAvailable in any

RAL colour Patterns

213 214 216TCG 217F

224 226F 706F 0794F 902/903 1194TCG

1279F 1280F 1281F/1282F 1283F/N0921F

1584F 1585F 2073F

2074F 2076F/2077F 2080F

2490F 3393F

2493F

3084F/3085F 3395F

3394F

36

Details

Tinplate Raised Meshes

Pre-GalvanisedPre-Galvanised SteelFlattened

Mild Steel Flattened

Details




Features and BenefitsExpanded Metal Mesh has a diverse range of properties, which makes it so versatile and appealing, here are some

of the key strengths of expanded metal mesh:

Patterns & ShapesIn addition to the traditional diamond shaped

range of meshes, the expanding metal process

can produce a dynamic variety of designs.

The mesh is formed from a single piece of metal

The process is not wasteful of material

Higher strength-to weight ratio than sheet metal

Highly efficientconductor

Bespoke designsExpanded Mesh can be supplied in a variety of

finishes, thickness, raised or flattened. Flattened is

smoother and does not indent soft material, however

it is not as strong as the more robust raised mesh.

Powder coating in your choice of colour will

enhance its aesthetic appearance and add to its

corrosion resistance as would plastic coating.

Electricity, magnetic flux and heat can all flow through expanded

metal mesh, as there is a continuous connection throughout each

sheet. There are no breaks or welds because the mesh has been

formed from a single piece of metal.

Which means that there is nothing to work loose, no fretting strands

or strained joins or welds. This makes expanded mesh ideal for

forming and beneficial to further processing such as pressing and

shearing.

By expanding metal from its solid sheet form, additional strength is

added. The uncut knuckles of expanded mesh withstand stress better

than welds or joints.

The expanding process involves slitting and stretching the metal to

create holes, which means there is no waste. This provides you with

direct cost savings, compared to other methods eg: perforating

metals (punching out the holes), the holes are treated as waste and

will incur extra cost to you.

Bespoke Designs




Westgate

33

Auroa House

Linear Beam

39

Linear Beam

Beams available in widthsfrom 100mm to 300mm

GT114 hangers at1500mm maximumcentres in bothdirections

GT112 primarysupport channels at1500mm maximumcentres

Lay on planks oflengths up to 2400mm. Plain or perforatedpanels can be used

Supporting beams

Beam supportbrackets

Crosslock 100


w up to 1.00*

Up to Class A*

NRC up to 0.10 - 1.00*

Dnfw

/Dncw

42dB*

A2-s1, d0*

B-s1, d0*

BS EN 13501-1

Circa 9kg/m²




Tiles/planks are demountable

Recyclable

Warranty available


The Linear Beam ceiling system provides a highspecification solution for office and commercialenvironments.The beam sections are available in a number ofstandard widths and are installed parallel and in asingle direction, creating a discrete linear ceilingeffect. The infill planks are normally supplied in300mm widths, lengths up to 2400mm, and the choice of a plain or perforated surface finish.Planks can be supplied with; square edges allround or bevelled edges to long sides only. Theycan also be supplied in a format that allows themto be hinged from the linear beam if required.

Linear Beam




Curvatura

41

Wire hangersupports

Hold downclips

Spacer/stabilizerbar

Splice

Curved exposedtee grid

Curved panels

SYSTEM DIAGRAM

Curvatura

A2-s1, d0 (BS EN 13501-1)


further information





Recyclable

The Curvatura 3-D system gives you thefreedom to create dramatic three-dimensionalcurved designs that combine shape, textureand lighting. The systems curved main teesegments, suspension profiles, optional edgetrim and flexible infill panels provide endless possibilities to create beautiful and dramaticdesigns.

Curvatura




Metalflair

43

DESIGN EXAMPLES

Variable

Blind BoxSection

Variable

GT 120

38

19

Cut panels to be supported by Blind Box Section,

complete with hold down wedges (GT 120),

Variable

Top HatSection

Variable

GT 12019 19

Cut panels to be supported by Top Hat Section,


Variable

19

38

GT 120

UpstandSection

Cut panels to be supported by Upstand Section,


repeatablepattern

triangularperforatedpanels

Metalflair




Metal Baffles

45

A completely different aesthetic and acoustic

solution, the Metal Baffles range is a great

alternative to suspended ceiling solutions. The

range maintains the feeling of open space, whilst

offering sound acoustic properties. The metal

baffles are suspended vertically directly from

the ceiling and can be face painted for desired

aesthetics.

SYSTEM DIAGRAM

200mm SPLICE PLATE

ACOUSTIC BAFFLE

3000mm BAFFLE SUPPORT CHANNEL

BAFFLE END CAP

RETAINING CLIP

50X50mm FIXING ANGLE

Standard panel sizes are 50mm wide and can be 1200/1500/1800mm

long; other sizes may be possible, contact technical sales.

Various perforation patterns available.

PANEL SIZES

w up to 1.00*

Up to Class A*

NRC up to 0.10 - 1.00*

A2-s1, d0 (BS EN 13501-1)


further information





Recyclable

Warranty available


Metal Baffles




1: 53

DOT-ART PATTERN DESIGN

METAL PRINTING MATERIC EFFECTS

Special FinishesCreate sophisticated environments of great visual

impact with our vast range of special finishes. The

options are endless so contact us to discuss your

design possibilities.

Special Finishes




Perforation Patterns

48


S0701 ultra microperf 0.7mm hole;5mm pitch; 1% open area

5.00

5.00 0.7 dia.

D278 1.5mm hole; 4mm pitch;22% open area

4.00

4.00 1.5 dia.

S1511 1.5mm hole; 4mm pitch;11% open area

45º4.00

4.00 1.5 dia.

8.00

8.00 1.5 dia.



8.00

8.00 1.5 dia. 3.97 2.4 dia.

3.97

S2428 2.4mm hole; 3.97mm pitch;28% open area


5.50 2.4 dia.

5.50

D320 2.4mm hole; 7.94mm pitch;14% open area

7.94

7.94

2.4 dia.


3.1 dia.6.26

6.26


8.64

8.64

3.96 dia.

S5046 5mm hole; 6.5mm pitch;46% open area


8.64

8.64

3.96 dia.

6.5

5.0 dia.6.5

S5012 5mm hole; 13mm pitch; 12% open area

13

13

5.0 dia.


7.94

7.94

2.4 dia.11

11

2.4 dia.




15.88

2.4 dia.

15.88

11

11

2.4 dia.

Burgess By System offer a range of standard perforation patterns as detailed below. These patternscan be supplied with plain borders and as blocks of perforations within a tile. Further perforationpatterns are available upon request.





Clip-In Wall Panels

50

2545 Length

Width

2545 Length

Width

2545 Length

Width

2545 Length

Width


Clip-In Wall Panels

SOUND ABSORPTION

Edge Details

Tile Size300 x 300

600 x 300

600 x 600

900 x 300

1200 x 300

1200 x 600

1500 x 300

1800 x 300

2400 x 300

750 x 750

500 x 500

24”x 24”

A F

EDGE DETAILS

acousticinlay

Absorption

Frequency Hz

125 250 500 1000 2000 3150

0.7 0.93 0.61 0.72 0.82 0.79

NRC 0.70

Class C Absorber

Mineral woolinsulation

Absorption

Frequency Hz

125 250 500 1000 2000 3150

0.49 0.95 0.86 0.95 1.04 1.05

NRC 0.95

Class A Absorber

D278 Perforated tile 10mm plain border, 22% open area, black acoustic inlay.

D278 Perforated tile 10mm plain border, 22% open area, 25mm thick x 45kg/m3 density mineral wool. Aluminium foil encased and faced one side black glass tissue.

PERIMETER INTERFACES

Closure angle:

WALL

SPRING TEE BAR (GT115) FIXED TO WALL

CLIP-IN CLOSURE ANGLE

FULL CLIP-IN TILE

Cut & wedged into oddleg channel:

WALL


CUT TILE WEDGED INTO ODDLEG CHANNEL (GT121

FULL CLIP-IN TILE

WALL


FULL CLIP-IN TILE

PLASTERBOARD BY OTHERS

Shadow gap trim (ET196) into plasterboard:

ET196 SHADOWGAP TRIM

w up to 1.00*

Up to Class A*

NRC up to 0.10 - 1.00*

A2-s1, d0 (BS EN 13501-1)


further information

Circa 9kg/m²





Recyclable

Warranty available


The Clip-In Wall Panels incorporate

Burgess By System’s standard metal tiles and

suspension components, adapted to wall

mounted configurations.

Clip-In Wall Panels




Nilgrid

52

1: 59

For Installation guidance please refer to Burgess Installation Instructions.

5

70

59

Variable150 max

5

70

Variable150 max

59

NIL 5

Bracket at 1200maximum centres

NIL 1profile

NIL 2profile

Closureangle

NIL 3cleat

NIL 4

NIL 5

bracket

Closureangle

NilgridCOMPONENT PARTS

EDGE DETAILS

TILE REMOVAL

Product No. NIL 1Description: Extruded pivot channel 60.5mm deep x 52mm wide 1.5mm thick aluminium, external faces painted to specification. Supplied in lengths of 3000mm.

Unit Weight: 2.00Kg

Product No. NIL 2Description: Extruded tee section assembly 59.5mm deep x 64mm wide x 1.5mm thick aluminium, external faces painted to specifica-tion. Supplied in lengths of 3000mm.

Unit Weight: 3.95Kg

Product No. NIL 3Description: Pressed pivot cleat 47mm x 44mm x 38mm x 1.6mm thick zintec, with 3mm dia hole to accept split pin.

Unit Weight: 0.03Kg

Product No. NIL 4Description: Pivot collar 17mm long x 12.5mm o/d x 1.2mm thick galvanised mild steel tube, with 3.2mm dia hole to accept split pin, 22mm long x 2mm dia.

Unit Weight: 0.006kg

Product No. NIL 5Description: Wall bracket 193mm long x 70mm deep x 1.6mm thick galvanised mild steel support bracket with adjustment slots. Supplied complete with 70mm deep x 52mm x 42mm x 2.5mm thick fixing channel with fixing holes and 3mm diameter pivot pin. Overall length 200mm.

Unit Weight: 0.325Kg

Product No. NIL 1 Splice plateDescription: Splice plate 200mm long x 15.5mm x 48mm x 10mm x 0.7mm thick zintec.

Unit Weight: 0.09Kg

Product No. NIL 2Splice plateDescription: 250mm long x 57.5mm x 15.5mm x 0.7mm thick zintec.

Unit Weight: 0.1Kg

Product No. GT 133Closure angleDescription: 2400mm long closure angle 100 x 25 x 0.9mm zinc coated mild steel. Painted white on one exposed face. Other sizes available.

Unit Weight: 2.0Kg

Type PA

Bevel 3 sidesSquare at NIL 1 side

Type PB

Bevel long sideSquare short sides

NIL 4 collar

NIL 1profile

GT 122

w up to 1.00*

Up to Class A*

NRC up to 0.10 - 1.00

Dnfw

/Dncw

26-42dB

A2-s1, d0 (BS EN 13501-1)


further information





Recyclable

Warranty available


Nilgrid




metal ceilings range - system building products...metal ceilings introduction the burgess by...

Documents