mi5080 cenius tx 02 2015 6c en - tech-kom - dystrybutor ... · pdf filecultivator, the...

12
Cenius TX Cenius TX

Upload: duongnguyet

Post on 20-Mar-2018

218 views

Category:

Documents


5 download

TRANSCRIPT

Page 1: MI5080 Cenius TX 02 2015 6c en - TECH-KOM - dystrybutor ... · PDF filecultivator, the simultaneous ... C-Mix duck foot share 320 mm C-Mix wing ... MI4985_Cenius_TX_02_2015_6c_de.indd

Cenius TXCenius TX

MI4985_Cenius_TX_02_2015_6c_de.indd 1 06.02.15 08:29

Page 2: MI5080 Cenius TX 02 2015 6c en - TECH-KOM - dystrybutor ... · PDF filecultivator, the simultaneous ... C-Mix duck foot share 320 mm C-Mix wing ... MI4985_Cenius_TX_02_2015_6c_de.indd

SPEEDtillin

g

MI4985_Cenius_TX_02_2015_6c_de.indd 2 06.02.15 08:29 MI4985_Cenius_TX_02_2015_6c_de.indd 3 06.02.15 08:29

Cenius TX

Top benefits of the Cenius TX

The C-Mix Super tines, protected via a pressurised spring overload safety device with a release force of 600 kg and 30 cm lift height, provide reliable operation even on very stony soils and ensure the safe mainte-nance of the working depth down to 30 cm.

The new C-Mix share system offers the appropriate share for all operational conditions and ensures an intensive mixing.

The perfect levelling effect is provided by a choice of serrated levelling discs, smooth levelling discs or spring tine closers.

Four rows of swivelable tines, arranged on a 28 cm row spacing and with an 80 cm frame height ensure a blockage-free operation.

On very light sites the running gear can be adjusted in such a way that it acts as a support and in this way transfers load from the roller on to the running gear.

In very wet conditions, operation is also possible with-out a following roller so that only the running gear and the support wheels are utilised for maintaining the depth. In this case, tines mounted behind the tyres on the running gear loosen the wheel tracks.

The new C-Mix share system offers a completely flexible operation – from shallow stubble work via top soil deep loosening to seedbed preparation.

A choice of linkage of the Cenius TX to the tractor and, via a flange, a change is always possible.

A choice of five following rollers for the optimum reconsolidation on all soil types and conditions are on offer.

Perfect working performance

Maximum flexibility

Cenius 5003-2TX Super

Page 3: MI5080 Cenius TX 02 2015 6c en - TECH-KOM - dystrybutor ... · PDF filecultivator, the simultaneous ... C-Mix duck foot share 320 mm C-Mix wing ... MI4985_Cenius_TX_02_2015_6c_de.indd

MI4985_Cenius_TX_02_2015_6c_de.indd 2 06.02.15 08:29

2 3

MI4985_Cenius_TX_02_2015_6c_de.indd 3 06.02.15 08:29

The benefits at a glance

Working widths of up to 7 m in combination with the optional traction assistance provide a high work rate.

High manoeuvrability on the road and in the field thanks to the centre running gear with a 40 km/h road transport permit.

In combination with the GreenDrill 500 for the Cenius TX cultivator, the simultaneous mixing and sowing of catch crops is possible in one operational pass.

As an option, a stepless hydraulic working depth adjustment, including a scale for reading off the depth position, is available enabling the flexible adaptation to differing soil conditions.

The optionally available hydraulic adjustment of the levelling discs offers the ability to alter the setting from the tractor seat ensuring a maximum of comfort and operational safety.

The roller carriers make for the simple dismounting and a safe parking of the loose following rollers.

High outputsMaximum comfort

Larger working widths and integrated running gear

The new Cenius TX, in working widths of 4, 5, 6 and 7 m, offers excellent working performance for:

Stubble cultivation after harvest: 8 to 12 cm

Medium deep and intensively mixing soil tillage: 12 to 20 cm

Top soil deep loosening after root crops: 20 to 30 cm

Page 4: MI5080 Cenius TX 02 2015 6c en - TECH-KOM - dystrybutor ... · PDF filecultivator, the simultaneous ... C-Mix duck foot share 320 mm C-Mix wing ... MI4985_Cenius_TX_02_2015_6c_de.indd

MI4985_Cenius_TX_02_2015_6c_de.indd 4 06.02.15 08:30 MI4985_Cenius_TX_02_2015_6c_de.indd 5 06.02.15 08:30

Cenius TX

Perfect working performance

Together with the newly developed C-Mix Super pressure spring overload safety device, the tine element in the centre of the machine provides a perfect working performance even when top soil deep loosening.

The release force on this C-Mix Super tine overload safety device is more than 600 kg and clears to a height of 300 mm,

allowing efficient and continuous operation, even under the most arduous of conditions.

The C-Mix Special tine with its shear bolt overload safety device is the alternative for light and medium light soils without stones.

C-Mix Super tines with pressure spring overload safety device

C-Mix Special tines with shear bolt overload safety device

Cenius 5003-2TX SpecialCenius 7003-2TX Super

Page 5: MI5080 Cenius TX 02 2015 6c en - TECH-KOM - dystrybutor ... · PDF filecultivator, the simultaneous ... C-Mix duck foot share 320 mm C-Mix wing ... MI4985_Cenius_TX_02_2015_6c_de.indd

MI4985_Cenius_TX_02_2015_6c_de.indd 4 06.02.15 08:30

4 5

MI4985_Cenius_TX_02_2015_6c_de.indd 5 06.02.15 08:30

The shares

With this new share system, AMAZONE now offers a superb spectrum of shares providing the individual solution for any customer. Thus the Cenius TX is a very flexible machine that can be operated in all soil cultivation systems on modern arable farms.

C-Mix tip 100 mm with guide plate 100 mm

C-Mix duck foot share 320 mm

C-Mix wing share 350 mm

C-Mix tip 80 mm with guide plate 80 mm

The heart of the cultivator: the shares

The operational spectrum of the Cenius TX ranges from shallow stubble work, via the top soil deep loosening, through to seedbed preparation. Of course this requires a matching range of shares.

The separation of guide plate from the share tip above all serves to reduce wearing metal costs. Depending on soil type, site and soil moisture, 3 to 5 share tips can be worn prior to exchanging the guide plate.

The new guide plates of the C-Mix system are equipped with a spiral that ensures an intensive mixing effect.

The C-Mix share system includes the following options:

C-Mix duck foot share 320 mm– Working depths of 3 – 10 cm– The specialist for shallow stubble tillage– Complete surface area disturbance of stubbles and

interruption of the capillary water draw– Shallow surface mixing of volunteer grains and

weed seeds– Intensive mixing effect when used in combination

with the C-Mix guide plate

C-Mix wing share 350 mm– Working depths of 8 – 12 cm– Complete surface area disturbance of stubbles and

interruption of the capillary water draw– Shallow surface mixing of volunteer grains and

weed seeds

– An intensive mixing effect when in combination with the C-Mix 80/100 point and guide plate

– Removable wings for utilising the C-Mix 80/100 for deep loosening

C-Mix tip 100 mm with guide plate 100 mm– Working depths of 10 – 20 cm– Universal use, from stubble tillage to primary soil tillage– For the use on very light soils with good flow behaviour

to improve the mixing effect– Intensive soil movement, distinct mixing effect in com-

bination with the spiral guide plate

C-Mix tip 80 mm with guide plate 80 mm– Working depths of 12 – 30 cm– For primary soil tillage at medium down to full top

soil depth– Intensive loosening and straw incorporation in con-

junction with the spiral guide plate – Also suitable for stubble tillage when in combination

with the 350 mm C-Mix wing share– The share is tapered in its width to 50 mm at the tip

resulting in: – Perfect entry force even under the most arduous

of conditions – Simultaneously the material thickness is increased

at the share tip by 20 % – Improved protection against wear

Page 6: MI5080 Cenius TX 02 2015 6c en - TECH-KOM - dystrybutor ... · PDF filecultivator, the simultaneous ... C-Mix duck foot share 320 mm C-Mix wing ... MI4985_Cenius_TX_02_2015_6c_de.indd

MI4985_Cenius_TX_02_2015_6c_de.indd 6 06.02.15 08:30 MI4985_Cenius_TX_02_2015_6c_de.indd 7 06.02.15 08:30

Cenius TX

Integrated running gear in a class of its own!

Operation of the Cenius 7003-2TX Super with the depth roller at the rear

Operation of the 6003-2TX Super without the depth roller at the rear

Page 7: MI5080 Cenius TX 02 2015 6c en - TECH-KOM - dystrybutor ... · PDF filecultivator, the simultaneous ... C-Mix duck foot share 320 mm C-Mix wing ... MI4985_Cenius_TX_02_2015_6c_de.indd

MI4985_Cenius_TX_02_2015_6c_de.indd 6 06.02.15 08:30

6 7

MI4985_Cenius_TX_02_2015_6c_de.indd 7 06.02.15 08:30

Chassis | Depth guidance

At the front of the machine, support wheels carry out the depth guidance. At the rear of the machine the depth rollers take over this task.

For farms with uniform soil conditions, the standard mechanical and tool-less setting of the working depth on the implement is perfectly adequate.

If it is intended to adjust the working depth whilst on-the-move to react to varying soil conditions or to repair harmful compaction, the optionally available step-less hydraulic depth control is recommended.

The depth setting of the support wheels, of the running gear and of the depth roller are synchronised through a sophisticated hydraulic system via a double acting control valve – a big gain in comfort for the Cenius TX!

Maximum flexibility

In very wet conditions, in late autumn or when preparing the field prior to winter, the Cenius TX can be operated with-out a depth roller. In this special case, the chassis serves as the depth control. A swivel clip system then fixes the work-ing depth. The tines at the rear of the wheels serve as wheel mark eradicators to ensure a level finish.

When working with depth rollers, the required lift height of the running gear is accurately defined for a minimum turnaround time on the headland. If, during operation, the working depth is adjusted, the lift height of the wheels is automatically matched via the hydraulic system. In this way any “running along” of the wheels is prevented. If, however, on areas with very light soils where some additional help from the transport wheels is desired, this can also be set.

Scale for the working position of the tines

Centralised and simple depth adjustment

Page 8: MI5080 Cenius TX 02 2015 6c en - TECH-KOM - dystrybutor ... · PDF filecultivator, the simultaneous ... C-Mix duck foot share 320 mm C-Mix wing ... MI4985_Cenius_TX_02_2015_6c_de.indd

MI4985_Cenius_TX_02_2015_6c_de.indd 8 06.02.15 08:30 MI4985_Cenius_TX_02_2015_6c_de.indd 9 06.02.15 08:30

Cenius TX

Optimised levelling and reconsolidation

Central hydraulic adjustmentScale for the working position of the levelling discs

For levelling the soil surface, an additional levelling ele-ment is arranged behind the four rows of tines. Three alter-natives are available for the customer. Apart from the spring tine levelling element one can also select as an alternative, depending on the location, serrated or smooth discs for the levelling work.

On the Cenius TX, the adjustment of the levelling unit is quickly, safely done without any tools via two spindles at

each side of the machine. For additional operational com-fort, there is now also possible hydraulic adjustment of the levelling unit from the tractor cab. The hydraulic adjustment offers maximum comfort and operational reliability. Via a clear scale, easily visible from the tractor seat the current height position of the levelling discs can be read.

Simple and comfortable adjustment of the levelling unit

Serrated levelling discs with with central mechanical adjustment Smooth levelling discs Spring tine levellers

Page 9: MI5080 Cenius TX 02 2015 6c en - TECH-KOM - dystrybutor ... · PDF filecultivator, the simultaneous ... C-Mix duck foot share 320 mm C-Mix wing ... MI4985_Cenius_TX_02_2015_6c_de.indd

MI4985_Cenius_TX_02_2015_6c_de.indd 8 06.02.15 08:30

8 9

MI4985_Cenius_TX_02_2015_6c_de.indd 9 06.02.15 08:30

Levelling and reconsolidation | Following rollers

Cage roller

Tandem roller

Knife ring roller

Depending on the type of soil, different depth rollers provide either intense crumbling or reconsolidation. The proven wedge ring, knife ring, tandem and cage rollers as seen previously from AMAZONE can be used.

Site matched reconsolidation

Versatile range of rollers

Cenius 7003-2TX Super with wedge ring roller Cenius 7003-2TX Super with GreenDrill seeder box

As an additional option for the Cenius TX, the GreenDrill seeder box is now also available, enabling soil tillage and the sowing of catch crops in just one operational pass. The seed hopper with a capacity of 500 l is very well accessible via access steps. The hydraulic blower fan delivers the seed to the rear where it is distributed in front of the roller via baffle plates.

GreenDrill for Cenius TX

Cenius 7003-2TX Super with wedge ring roller

Page 10: MI5080 Cenius TX 02 2015 6c en - TECH-KOM - dystrybutor ... · PDF filecultivator, the simultaneous ... C-Mix duck foot share 320 mm C-Mix wing ... MI4985_Cenius_TX_02_2015_6c_de.indd

MI4985_Cenius_TX_02_2015_6c_de.indd 10 06.02.15 08:30 MI4985_Cenius_TX_02_2015_6c_de.indd 11 06.02.15 08:30

Cenius TX

Cenius TX with variable traction control

Cenius 7003-2TX Super

Page 11: MI5080 Cenius TX 02 2015 6c en - TECH-KOM - dystrybutor ... · PDF filecultivator, the simultaneous ... C-Mix duck foot share 320 mm C-Mix wing ... MI4985_Cenius_TX_02_2015_6c_de.indd

MI4985_Cenius_TX_02_2015_6c_de.indd 10 06.02.15 08:30

10 11

MI4985_Cenius_TX_02_2015_6c_de.indd 11 06.02.15 08:30

Increase of tractor traction – Weight transfer from the Cenius on to the tractor’s

rear axle – up to 1,500 kg additional weight on the rear axle

Increase in acreage output Reduction of fuel consumption

Traction control

The Cenius TX is coupled to the tractor via the lower links, a towing eye or a K80 ball coupling. This flexibility allows its use on tractors with caterpillar tracks or centre pivot steering as well as the use of standard tractors.

Linkage

+ 1,500 kg

Traction assistance with optional toolbox

Traction control | Linkage

Page 12: MI5080 Cenius TX 02 2015 6c en - TECH-KOM - dystrybutor ... · PDF filecultivator, the simultaneous ... C-Mix duck foot share 320 mm C-Mix wing ... MI4985_Cenius_TX_02_2015_6c_de.indd

MI4985_Cenius_TX_02_2015_6c_de.indd 12 06.02.15 08:30

Illustrations, content and technical data are not binding! Machine illustrations can vary due to country-specific traffic legislation.

Technical data: Cenius TX cultivator

40 km/h

The integrated running gear provides the machine with a high manoeuvrability both, on the road and in the field. On the Cenius TX, the 550/45-22.5 sized tyres come as

standard. When equipped with air braking, a fast transport speed of 40 km/h is permitted.

Fast on the road

Cenius 4003-2TX Cenius 5003-2TX Cenius 6003-2TX Cenius 7003-2TX

Working width (m) 4.00 5.00 6.00 7.00

Operational speed (km/h) 8 – 15

Working depth (cm) 8 – 30

No. of tines 13 17 21 25

Type of tines C-Mix Super C-Mix Special or C-Mix Super

Tine spacing (mm) 307 294 286 280

Power requirement from/to (HP/m) 50 – 80

Transport length (m) 9.30

Transport width (m) 3.00

Transport height (m) 2.80 3.10 3.70 4.00

Weight (kg) 6,300 7,000 8,500 9,000

Permitted support load (kg) 1,550

AMAZONEN-WERKE H. DREYER GmbH & Co. KGP. O. Box 51 · 49202 Hasbergen-Gaste/GermanyPhone: +49 (0)5405 501-0 · Fax: +49 (0)5405 501-193

MI5080 (en_GB) 02.15 Printed in Germany www.amazone.de www.amazone.co.uk E-Mail: [email protected]