michelin technical data...machine - use ( kg - lb) counterbalanced lift truck, load wheel
TRANSCRIPT
2019
HANDLING, PORT, AIRPORTAND INTERMODAL TYRES
MICHELINTECHNICAL DATA
2MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
content chapter
Tyre RANGE CHARt page 4
Product presentatioN page 7
TyreS CHARACTERISTICS page 17
general information page 37
HANDLING, PORT, AIRPORT AND INTERMODAL TYRES
MICHELINTECHNICAL DATA
3MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
H A N D L I N G , P O R T A N D I N T E R M O D A L
MICHELIN®
XZR®
MICHELIN® X TERMINAL-T™
MICHELIN® XZM®
MICHELIN®
XZM™ 2+
MICHELIN® X-STRADDLE® 2
MICHELIN® X STACKER® 2
MICHELIN® X STACKER® 2 LC
MICHELIN® X-STRADDLE®
TYRE RANGE CHART
4MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
NOTES
5MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
6MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
Product presentatioN
HANDLING, PORT, AIRPORT AND INTERMODAL TYRES
MICHELINTECHNICAL DATA
Michelin Xzr PAGE 8
Michelin XZM PAGE 9
Michelin Xzm 2+ PAGE 10
Michelin X STACKER 2 PAGE 11
Michelin X STACKER 2 LC PAGE 12
Michelin X-STRADDLE 2 PAGE 13
Michelin x Terminal-T PAGE 14
7MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
the solution for airport
ground support equipment
with an exceptional
total cost of ownership
comfort
An extremely robust casing with steel-belted radial casing instead of usual textile solutions
Exceptional grip with multi-block tread pattern and high void-to-lug ratio
a real innovation in tubEless tyre systems, the tubEless bead seal is a device that allows a michelin® tubEless tyre to be fitted to a tube-type rim
longevity/robustness
rubber compounds and specific tread pattern
Maximise lifetime and minimise maintenance requirements
Very strong bead area and sidewalls with an extremely robust casing
the tread designProvides continuous contact with the ground, avoiding vibrations
speed
Tread pattern & rubber compounds engineered for cooler running
Capable of reaching up to 50 km/h (31 mph) under intense usage conditions
For Forklifts, Sweepers & Other Specific Machines
All sizes comply with International standards currently in force regarding antistatic properties. For use in all industries where there is a risk of combustion or explosion: chemical,petrochemical, paint, …
MICHELIN XZR
88MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
Radial Technology
The sidewall and tread function separately
High Protection
Reinforced crown and sidewalls for limited downtime
SWITCH FOR
A LONGER LIFE!
long tyre life
Massive tread pattern and two protection bands on sidewalls designed for long tyre life and optimised cost per hour
The crown is stabilised by several plies.
The steel casing has one
radial ply.
For Forklifts up to 16T
All sizes comply with International standards currently in force regarding antistatic properties. For use in all industries where there is a risk of combustion or explosion: chemical,petrochemical, paint, …
MICHELIN XZM
9MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
your productivity
deserves michelin
comfort
strength
Highly resistant to impact and puncture
15% longer service life1—massive tread, wear-resistant, low- abrasion rubber
productivity
reinforced-crown architectureHighly resistant to impact and puncture
extensive speed capability15% longer service life1
Radial technology
For Forklift Trucks
1 Compared with the same sized MICHELIN® XZM® tyre under normal use.
MICHELIN XZM 2+
10MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
RUN FASTER1
1Compared to MICHELIN® X STACKER® 18.00R25 tyre.2Compared to MICHELIN® X STACKER® 18.00R25 tyre, average performance by port site. Projected improvement in wear life based on field performance in customer port sites.
MAXIMISE THE UPTIME
OF YOUR REACH STACKER
standard bead
MICHELIN Bead with b2
technology
Higher crown endurance(1) with new improved structure
Excellent bead endurance with the introduction of B2 Technology
MORE ROBUST 1
Improved overall robustness of the tyre
Adapted tread depth to run faster +40% distance per hour
LAST LONGER 2
7% longer wear life
A dual compound to run faster and for longer wear life and for longer wear life
MICHELIN X stacker 2 18.00 R 257km
distance / hour
72 mm
MICHELIN X STacker 18.00 R 25
5km distance / hour
90 mm
THE MICHELIN Dual Compound:
Type 1 rubber with high wear-resistance Type 2 rubber with high heat-resistance
For Reach Stackers
MICHELIN X STACKER 2
11MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
MORE ROBUST 1
1 Compared to 18.00 R 25 MICHELIN® X STACKER® 2 tyre. Less rubber for a cooler tyre and more internal air volume for an improved resistance to load.2 18.00 R25 MICHELIN® X STACKER® 2 tyre air volume is 465 Litres an 18.00 R 25 MICHELIN® X STACKER® 2 LC tyre air volume is 505 litres.3 18.00 R25 MICHELIN® X STACKER® 2 tyre tread depth is 72 mm and 18.00 R25 MICHELIN® X STACKER® 2 LC tyre tread depth is 54 mm.
STACKS UP IN
PERFORMANCE
Designed to address very severe usage (speed, load combination) on reach stacker’s rear axle
For Reach Stackers
MICHELIN X STACKER 2 LC
12MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
HIGH LOAD CAPACITY
Carry up to 17.8 Tonnes1 at up to 22kph Due to +20% tyre inner air volume2
RUN FASTER3
Drive up to 15 km in an hour and 35 kph max speed
Due to a cooler running tyre4
RUN FURTHER 5
UP TO +15% Tyre LIFE5
Due to a new tread design with 8% more rubber and an improved crown and bead durability4
SIMPLICITY
Can be fitted on both 11.25 and 13.00 rims6
Due to a new bead area design
MOVING CONTAINERS
FURTHER AND FASTER
1 At the nominal pressure of 10 bars, vs 15.75 tonnes for MICHELIN® X-STRADDLE® 2 450/95 R 25. And carry 17 tonnes from 22km/h to 25km/h. 2 Compared to MICHELIN® X-STRADDLE® 16.00R25 and MICHELIN® X-STRADDLE® 2 450/95R25 tyres.3 Compared to MICHELIN® X-STRADDLE® 480/95R25: max distance of 12 kilometres in one hour and 30 mi/h max speed.4 Compared to MICHELIN® X-STRADDLE® 480/95R25 tyre.5 Compared to MICHELIN® X-STRADDLE® 480/95R25 tyre, average performance by port site. Projected improvement in tyre life based on field performance in customer port sites of the MICHELIN® X-STRADDLE® 2 450/95R25 tyre size compared to the MICHELIN® X-STRADDLE® 16.00R25 tyre (the 450/95R25 is an equivalent size of the 16.00R25), that included individual design improvements incorporated into the MICHELIN® X-STRADDLE® 2 480/95R25 tyre.6 Measuring rim: 13.00/2.5 and approved rim: 11.25/2.0 (MICHELIN® Data Book 2016)
For Straddle Carriers
MICHELIN X-STRADDLE 2
13MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
Productivity
Low downtime and dedicated to terminal tractorsHigh level of transversal
and longitudinal grip
Excellent performance on wet ground
Tubeless tyre
Anti-static properties
Safety & Reliability
KEEP YOUR MACHINE ON
THE MOVE AND KEEP
YOUR Tyre BUDGET
UNDER CONTROL
Versatility
Same size and same treadfor all the axles (front and rear)
Reduction of stocks
For airport tractors, port tractors, tractors and trailers
MICHELIN X TERMINAL-T
14MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
NOTES
15MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
16MICHELIN TECHNICAL DATA | 2019 EDITIONINDUSTRIAL,PORT AND INTERMODAL TYRES
TyreS CHARACTERISTICS
HANDLING, PORT, AIRPORT AND INTERMODAL TYRES
MICHELINTECHNICAL DATA
8’’ PAGE 18
9’’ PAGE 19
10’’ PAGE 21
12’’ PAGE 22
15’’ PAGE 24
20’’ PAGE 28
22.5’’ PAGE 30
24’’ PAGE 31
25’’ PAGE 32
33’’ PAGE 35
17MICHELIN TECHNICAL DATA | 2019 EDITIONINDUSTRIAL,PORT AND INTERMODAL TYRES
8’’COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hour
km milee
mm inchD
mm inchR’
mm inchRC
mm inchTread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 111A55.00 R 8 Tubeless (10)
11020886381
159.3
1375.4
46318.2
2128.3
140755.4
2329
1646.5
92.4
3 1/4 l3.00D3.50 D
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC12302712
14203131
16503638
<= 10 KM/H<= 6 MP/H
10602337
12302712
14203131
25 KM/H15 MPH
8101786
9402073
10902403
35 KM/H22 MPH
7501654
8701918
10102227
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
10602337
12302712
14203131
25 KM/H15 MPH
10602337
12302712
14203131
35 KM/H22 MPH
10202249
11802602
13703021
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 113A5150/75 R 8 Tubeless (10)
11008755004
159.3
1515.9
42416.7
1947.6
128750.7
1620.2
1746.9
82.1
4.33 R
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC12402734
14803263
17403837
<= 10 KM/H<= 6 MP/H
10702359
12802822
15003308
25 KM/H15 MPH
8201808
9802161
11502536
35 KM/H22 MPH
7601676
9102007
10702359
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
10702359
12802822
15003308
25 KM/H15 MPH
10702359
12802822
15003308
35 KM/H22 MPH
10302271
12302712
14403175
18MICHELIN TECHNICAL DATA | 2019 EDITIONINDUSTRIAL,PORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
TYRE LOADS IN KG AND IN LB
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 125A5180/70 R 8 Tubeless (10)
11006964585
159.3
1706.7
45417.9
2058.1
137154
1923.9
1967.7
112.9
4.33 R
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC18904167
21904829
25005513
<= 10 KM/H<= 6 MP/H
16303594
18904167
21504741
25 KM/H15 MPH
12502756
14503197
16503638
35 KM/H22 MPH
11602558
13502977
15303374
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
16303594
18904167
21504741
25 KM/H15 MPH
16303594
18904167
21504741
35 KM/H22 MPH
15703462
18204013
20704564
9’’COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hour
km milee
mm inchD
mm inchR’
mm inchRC
mm inchTread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZR 121A56.00 R 9 Tubeless
11020668425
2515.5
1646.5
53020.9
2419.5
160563.2
1012.6
1927.6
184.8
4.00E
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC15903506
18904167
21904829
<= 10 KM/H<= 6 MP/H
13703021
16303594
18904167
25 KM/H15 MPH
10502315
12502756
14503197
35 KM/H22 MPH
9802161
11602558
13502977
40 KM/H25 MPH
9402073
11202470
13002867
50 KM/H31 MPH
8901962
10502315
12202690
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
13703021
16303594
18904167
25 KM/H15 MPH
13703021
16303594
18904167
35 KM/H22 MPH
13202911
15703462
18204013
19MICHELIN TECHNICAL DATA | 2019 EDITIONINDUSTRIAL,PORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
TYRE LOADS IN KG AND IN LB
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 121A56.00 R 9 Tubeless (10)
11020450734
159.3
1646.5
53921.2
2489.8
164164.6
2430.2
1927.6
154
4.00E
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC15903506
18904167
21904829
<= 10 KM/H<= 6 MP/H
13703021
16303594
18904167
25 KM/H15 MPH
10502315
12502756
14503197
35 KM/H22 MPH
9802161
11602558
13502977
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
13703021
16303594
18904167
25 KM/H15 MPH
13703021
16303594
18904167
35 KM/H22 MPH
13202911
15703462
18204013
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 134A5200/75 R 9 Tubeless (10)
11009079749
159.3
2088.2
53421
2409.4
161063.4
2227.7
2399.4
195
6.00E
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC22705005
27506064
32107078
<= 10 KM/H<= 6 MP/H
19504300
23705226
27606086
25 KM/H15 MPH
15003308
18204013
21204675
35 KM/H22 MPH
13903065
16903726
19704344
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
19504300
23705226
27606086
25 KM/H15 MPH
19504300
23705226
27606086
35 KM/H22 MPH
18804145
22805027
26505843
20MICHELIN TECHNICAL DATA | 2019 EDITIONINDUSTRIAL,PORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
TYRE LOADS IN KG AND IN LB
10’’COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hour
km milee
mm inchD
mm inchR’
mm inchRC
mm inchTread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZR 128A56.50 R 10 Tubeless
11020779365
2515.5
1847.2
57822.8
26410.4
175369
1113.9
2178.5
236.1
5.00F 5.50F
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC19304256
23105094
27205998
<= 10 KM/H<= 6 MP/H
16603660
19904388
23405160
25 KM/H15 MPH
12802822
15303374
18003969
35 KM/H22 MPH
11802602
14203131
16703682
40 KM/H25 MPH
11402514
13602999
16103550
50 KM/H31 MPH
10802381
12902844
15203352
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
16603660
19904388
23405160
25 KM/H15 MPH
16603660
19904388
23405160
35 KM/H22 MPH
16003528
19104212
22504961
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 128A56.50 R 10 Tubeless (10)
11021354636
159.3
1867.3
58723.1
27010.6
178670.3
2734
2178.5
205.3
5.00F 5.50F
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC19304256
23105094
27205998
<= 10 KM/H<= 6 MP/H
16603660
19904388
23405160
25 KM/H15 MPH
12802822
15303374
18003969
35 KM/H22 MPH
11802602
14203131
16703682
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
16603660
19904388
23405160
25 KM/H15 MPH
16603660
19904388
23405160
35 KM/H22 MPH
16003528
19104212
22504961
21MICHELIN TECHNICAL DATA | 2019 EDITIONINDUSTRIAL,PORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
TYRE LOADS IN KG AND IN LB
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 142A5225/75 R 10 Tubeless (10)
11008959673
159.3
2208.7
59123.3
26410.4
177970
2430.2
25910.2
256.6
6.50F
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC28006174
34307563
40108842
<= 10 KM/H<= 6 MP/H
24105314
29606527
34507607
25 KM/H15 MPH
18504079
22705005
26505843
35 KM/H22 MPH
17203793
21004631
24605424
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
24105314
29606527
34507607
25 KM/H15 MPH
24105314
29606527
34507607
35 KM/H22 MPH
23205116
28406262
33207321
12’’COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hour
km milee
mm inchD
mm inchR’
mm inchRC
mm inchTread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZR 136A57.00 R 12 Tubeless
11021062234
2515.5
1937.6
66126
30211.9
200679
1113.9
2309.1
328.5
5.00S
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC23205116
27506064
33907475
<= 10 KM/H<= 6 MP/H
19904388
23705226
29206439
25 KM/H15 MPH
15303374
18204013
22404939
35 KM/H22 MPH
14203131
16903726
20804586
40 KM/H25 MPH
13703021
16203572
20004410
50 KM/H31 MPH
12902844
15303374
18904167
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
19904388
23705226
29206439
25 KM/H15 MPH
19904388
23705226
29206439
35 KM/H22 MPH
19204234
22805027
28006174
22MICHELIN TECHNICAL DATA | 2019 EDITIONINDUSTRIAL,PORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
TYRE LOADS IN KG AND IN LB
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 136A57.00 R 12 Tubeless (10)
11019571359
159.3
1967.7
67126.4
30912.2
204380.4
2835.3
2309.1
246.3
5.00S
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC23205116
27506064
33907475
<= 10 KM/H<= 6 MP/H
19904388
23705226
29206439
25 KM/H15 MPH
15303374
18204013
22404939
35 KM/H22 MPH
14203131
16903726
20804586
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
19904388
23705226
29206439
25 KM/H15 MPH
19904388
23705226
29206439
35 KM/H22 MPH
19204234
22805027
28006174
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 145A5250/60 R 12 Tubeless
35815107263
159.3
25410
61624.3
28011
186573.4
2734
29311.5
307.9
8.00G
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC30606747
37008159
43809658
<= 10 KM/H<= 6 MP/H
26405821
31907034
37708313
25 KM/H15 MPH
20304476
24505402
29006395
35 KM/H22 MPH
18804145
22705005
26905931
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
26405821
31907034
37708313
25 KM/H15 MPH
26405821
31907034
37708313
35 KM/H22 MPH
25405601
30706769
36308004
23MICHELIN TECHNICAL DATA | 2019 EDITIONINDUSTRIAL,PORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
TYRE LOADS IN KG AND IN LB
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 152A5250/75 R 12 Tubeless (10)
11010851744
159.3
25610.1
68827.1
31112.2
207881.8
2835.3
29411.6
3810
8.00G
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC37308225
457010077
537011841
<= 10 KM/H<= 6 MP/H
32207100
39308666
462010187
25 KM/H15 MPH
24705446
30206659
35507828
35 KM/H22 MPH
22905049
28006174
32907254
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
32207100
39308666
462010187
25 KM/H15 MPH
32207100
39308666
462010187
35 KM/H22 MPH
30906813
37808335
44409790
15’’COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hour
km milee
mm inchD
mm inchR’
mm inchRC
mm inchTread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 143A57.00 R 15 Tubeless (10)
11021185869
159.3
1967.7
73328.9
33713.3
223087.8
2835.3
2359.3
307.9
5.5 6.0
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC30756780
36007938
40909018
<= 10 KM/H<= 6 MP/H
26655876
31206880
35407806
25 KM/H15 MPH
20504520
24005292
27256009
35 KM/H22 MPH
18954178
22204895
25205557
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
26655876
31206880
35407806
25 KM/H15 MPH
26655876
31206880
35407806
35 KM/H22 MPH
25605645
30006615
34057508
24MICHELIN TECHNICAL DATA | 2019 EDITIONINDUSTRIAL,PORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
TYRE LOADS IN KG AND IN LB
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 146A57.50 R 15 Tubeless (10)
11021462488
159.3
2128.3
77130.4
35714.1
235292.6
3037.8
25410
3810
6.0 6.5
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC33007277
39308666
45309989
<= 10 KM/H<= 6 MP/H
28406262
33807453
39008600
25 KM/H15 MPH
21804807
26005733
30006615
35 KM/H22 MPH
20204454
24105314
27806130
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
28406262
33807453
39008600
25 KM/H15 MPH
28406262
33807453
39008600
35 KM/H22 MPH
27306020
32507166
37508269
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 153A58.25 R 15 Tubeless (10)
11021856370
159.3
2409.4
83532.9
38515.2
2543100.1
3341.6
28011
4612.2
6.57.07.5
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC40108842
476010496
552012172
<= 10 KM/H<= 6 MP/H
34507607
41009041
475010474
25 KM/H15 MPH
26505843
31506946
36508048
35 KM/H22 MPH
24605424
29206439
33807453
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
34507607
41009041
475010474
25 KM/H15 MPH
34507607
41009041
475010474
35 KM/H22 MPH
33207321
39408688
457010077
25MICHELIN TECHNICAL DATA | 2019 EDITIONINDUSTRIAL,PORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
TYRE LOADS IN KG AND IN LB
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 149A5225/75 R 15 Tubeless (10)
11007955324
159.3
2258.9
70827.9
32212.7
214484.4
2531.5
25910.2
349
7.0
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC34807673
42309327
491010827
<= 10 KM/H<= 6 MP/H
29906593
36408026
42309327
25 KM/H15 MPH
23005072
28006174
32507166
35 KM/H22 MPH
21304697
25905711
30106637
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
29906593
36408026
42309327
25 KM/H15 MPH
29906593
36408026
42309327
35 KM/H22 MPH
28806350
35007718
40708974
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 153A5250/70 R 15 Tubeless (10)
11007550988
159.3
2509.8
73629
33313.1
222487.6
2835.3
28811.3
3910.3
7.5 7.0
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC37808335
467010297
552012172
<= 10 KM/H<= 6 MP/H
32507166
40208864
475010474
25 KM/H15 MPH
25005513
30906813
36508048
35 KM/H22 MPH
23205116
28606306
33807453
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
32507166
40208864
475010474
25 KM/H15 MPH
32507166
40208864
475010474
35 KM/H22 MPH
31306902
38708533
457010077
26MICHELIN TECHNICAL DATA | 2019 EDITIONINDUSTRIAL,PORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
TYRE LOADS IN KG AND IN LB
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 165A5315/70 R 15 Tubeless (10)
11010985047
159.3
32112.6
83933
37314.7
252099.2
3544.1
36914.5
7419.6
8.0
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC537011841
657014487
778017155
<= 10 KM/H<= 6 MP/H
462010187
566012480
670014774
25 KM/H15 MPH
35507828
43509592
515011356
35 KM/H22 MPH
32907254
40308886
477010518
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
462010187
566012480
670014774
25 KM/H15 MPH
462010187
566012480
670014774
35 KM/H22 MPH
44409790
544011995
644014200
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 170A5355/65 R 15 Tubeless (10)
00378981758
159.3
35514
84233.1
37614.8
253299.7
3544.1
40816.1
8321.9
9.75
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC619013649
763016824
906019977
<= 10 KM/H<= 6 MP/H
533011753
656514476
780017199
25 KM/H15 MPH
41009041
505011135
600013230
35 KM/H22 MPH
38008379
467010297
555012238
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
533011753
656514476
780017199
25 KM/H15 MPH
533011753
656514476
780017199
35 KM/H22 MPH
513011312
631013914
750016538
27MICHELIN TECHNICAL DATA | 2019 EDITIONINDUSTRIAL,PORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
TYRE LOADS IN KG AND IN LB
20’’COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hour
km milee
mm inchD
mm inchR’
mm inchRC
mm inchTread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 160A59.00 R 20 Tubeless (11)
11018587259
159.3
27110.7
103340.7
48118.9
3157124.3
3341.6
32512.8
9926.2
7.0
6.57.0T
7.33V7.5
B 7.0B 7.5B6.5B7.5
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC484010672
580012789
680014994
<= 10 KM/H<= 6 MP/H
41609173
500011025
585012899
25 KM/H15 MPH
32007056
38408467
45009923
35 KM/H22 MPH
29706549
35607850
41709195
40 KM/H25 MPH
28506284
34207541
40108842
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
41609173
500011025
585012899
25 KM/H15 MPH
41609173
500011025
585012899
35 KM/H22 MPH
40008820
480010584
562012392
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 166A510.00 R 20 Tubeless (11)
11001442890
159.3
29511.6
106842
49519.5
3257128.2
3544.1
35413.9
11730.9
7.5
7.07.0T
7.33V8.0
8.0 V8.00V8.0VB 7.0B 7.5B 8.0
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC574012657
685015104
801017662
<= 10 KM/H<= 6 MP/H
494010893
589012987
689015192
25 KM/H15 MPH
38008379
45309989
530011687
35 KM/H22 MPH
35207762
42009261
491010827
40 KM/H25 MPH
33907475
40408908
472010408
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
494010893
589012987
689015192
25 KM/H15 MPH
494010893
589012987
689015192
35 KM/H22 MPH
475010474
566012480
663014619
28MICHELIN TECHNICAL DATA | 2019 EDITIONINDUSTRIAL,PORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
TYRE LOADS IN KG AND IN LB
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 169A511.00 R 20 Tubeless (11)
11018974767
159.3
29411.6
109243
50419.8
3325130.9
3847.9
35313.9
12432.8
8.0
7.33V7.5
8.0 V8.00V8.0V8.5
8.50V8.5VB 8.0
B 8.5|B7.5
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC626013803
751016560
876019316
<= 10 KM/H<= 6 MP/H
539011885
647014266
754016626
25 KM/H15 MPH
41409129
497010959
580012789
35 KM/H22 MPH
38308445
460010143
537011841
40 KM/H25 MPH
36908136
44309768
517011400
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
539011885
647014266
754016626
25 KM/H15 MPH
539011885
647014266
754016626
35 KM/H22 MPH
518011422
622013715
725015986
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 176A512.00 R 20 Tubeless (11)
11008278891
159.3
32412.8
113644.7
52220.6
3453135.9
4050.4
38915.3
18448.6
8.5
8.08.50V8.5V9.0
9.00VB 8.5B8.5
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC771017001
922020330
1073023660
<= 10 KM/H<= 6 MP/H
663014619
793017486
923020352
25 KM/H15 MPH
510011246
610013451
710015656
35 KM/H22 MPH
472010408
565012458
657014487
40 KM/H25 MPH
454010011
543011973
632013936
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
663014619
793017486
923020352
25 KM/H15 MPH
663014619
793017486
923020352
35 KM/H22 MPH
638014068
763016824
888019580
29MICHELIN TECHNICAL DATA | 2019 EDITIONINDUSTRIAL,PORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
TYRE LOADS IN KG AND IN LB
22.5’’COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hour
km milee
mm inchD
mm inchR’
mm inchRC
mm inchTread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
X-TERMINAL T 168A8280/75 R 22.5 Tubeless (12)
00437133193
2012.4
27911
99539.2
44717.6
3000118.1
3139.1
32612.8
8522.5
8.25
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) TERMINAL TRACTOR
STATIC535011797
690015215
845018632
5 KM/H3 MPH
506011157
645014222
784017287
10 KM/H6 MPH
43709636
580012789
728016052
25 KM/H15 MPH
42009261
530011687
630013892
40 KM/H25 MPH
37508269
467510308
560012348
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
X-TERMINAL T 175A8310/80 R 22.5 Tubeless (12)
27814403379
2012.4
30712.1
108442.7
48319
3257128.2
3037.8
35514
11630.6
9.0
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) TERMINAL TRACTOR
STATIC689015192
865519084
1042022976
5 KM/H3 MPH
616013583
791017442
966021300
10 KM/H6 MPH
593013076
745016427
897019779
25 KM/H15 MPH
508011201
642014156
776017111
40 KM/H25 MPH
44509812
567512513
690015215
30MICHELIN TECHNICAL DATA | 2019 EDITIONINDUSTRIAL,PORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
TYRE LOADS IN KG AND IN LB
24’’COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hour
km milee
mm inchD
mm inchR’
mm inchRC
mm inchTread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 178A512.00 R 24 Tubeless (10)
11029642105
159.3
32512.8
123848.7
57022.4
3766148.3
4050.4
39015.4
20855
8.5
8.50V9.0
9.00VB 8.5
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC771017001
952020992
1133024983
<= 10 KM/H<= 6 MP/H
663014619
819018059
975021499
25 KM/H15 MPH
510011246
630013892
750016538
35 KM/H22 MPH
472010408
583012855
694015303
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
663014619
819018059
975021499
25 KM/H15 MPH
663014619
819018059
975021499
35 KM/H22 MPH
638014068
788017375
938020683
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 193A514.00 R 24 Tubeless (9 - 15)
08417993269
159.3
38315.1
141655.7
64125.2
4280168.5
6379.4
46018.1
24765.3
10.010.00 WA10.00W
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC1254027651
1510033296
1737038301
<= 10 KM/H<= 6 MP/H
1079023792
1300028665
1495032965
25 KM/H15 MPH
830018302
1000022050
1150025358
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
1079023792
1300028665
1495032965
25 KM/H15 MPH
1079023792
1300028665
1495032965
31MICHELIN TECHNICAL DATA | 2019 EDITIONINDUSTRIAL,PORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
TYRE LOADS IN KG AND IN LB
25’’COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hour
km milee
mm inchD
mm inchR’
mm inchRC
mm inchTread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM 200A516.00 R 25 Tubeless (15)
12378161590
159.3
44317.4
153160.3
69527.4
4634182.4
7189.4
53220.9
32686.1
11.25/2.0 13.00/2.0
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC1560034398
1822540186
2100046305
<= 10 KM/H<= 6 MP/H
1352029812
1580034839
1820040131
25 KM/H15 MPH
1040022932
1215026791
1400030870
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
1352029812
1580034839
1820040131
25 KM/H15 MPH
1352029812
1580034839
1820040131
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
X-STRADDLE 2 202A7450/95 R 25 Tubeless (16 - 18)
27896738706
159.3
42216.6
151059.4
67026.4
4530178.3
5063
34290.4
11.25/2.0 13.00/2.0
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) STRADDLE CARRIER
22 KM/H14 MPH
1063023439
1315028996
1575034729
25 KM/H15 MPH
1012522326
1252527618
1500033075
35 KM/H22 MPH
937020661
1159025556
1387530594
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
X-STRADDLE 200A516.00 R 25 Tubeless (8 - 15)
78830517688
127.5
43117
151059.4
67626.6
4545178.9
4961.7
53521.1
34290.4
11.25/2.010.0/2.013.00/2.0
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) PORT HANDLING
22 KM/H14 MPH
990021830
1230027122
1470032414
25 KM/H15 MPH
944020815
1172025843
1400030870
30 KM/H19 MPH
908520032
1128024872
1347529712
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
X-STRADDLE 206A5480/95 R 25 Tubeless (15)
23712089482
127.5
47718.8
155361.1
68727
4655183.3
5063
58523
400105.7
13.00/2.5
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) STRADDLE CARRIER
22 KM/H14 MPH
1197026394
1490032855
1785039359
25 KM/H15 MPH
1140025137
1420031311
1700037485
30 KM/H19 MPH
1097524200
1367030142
1635536063
32MICHELIN TECHNICAL DATA | 2019 EDITIONINDUSTRIAL,PORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
TYRE LOADS IN KG AND IN LB
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
X-STRADDLE 2 206A7480/95 R 25 Tubeless (16)
65307207011
159.3
46718.4
155361.1
68727
4655183.3
5063
58022.8
410108.3
13.00/2.5 11.25/2.0 [1.7]
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) STRADDLE CARRIER
22 KM/H14 MPH
1197026394
1490032855
1785039359
25 KM/H15 MPH
1140025137
1420031311
1700037485
35 KM/H22 MPH
1054523252
1313528963
1572534674
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM2+ 207A518.00 R 25 Tubeless (14)
23078398640
106.2
50319.8
166865.7
75129.6
5032198.1
7898.3
61224.1
470124.2
13.00/2.5 15.00/2.5
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC1838040528
2228049127
2625057881
<= 10 KM/H<= 6 MP/H
1593035126
1918042292
2275050164
25 KM/H15 MPH
1225027011
1475032524
1750038588
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
1593035126
1918042292
2275050164
25 KM/H15 MPH
1593035126
1918042292
2275050164
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
X STACKER 207A518.00 R 25 Tubeless (17)
54544121861
53.1
46318.2
166665.6
75729.8
5043198.5
90113.4
55621.9
460121.5
13.00/2.5 15.00/2.5
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC1838040528
2228049127
2625057881
<= 10 KM/H<= 6 MP/H
1593035126
1918042292
2275050164
25 KM/H15 MPH
1225027011
1475032524
1750038588
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
1593035126
1918042292
2275050164
25 KM/H15 MPH
1593035126
1918042292
2275050164
33MICHELIN TECHNICAL DATA | 2019 EDITIONINDUSTRIAL,PORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
TYRE LOADS IN KG AND IN LB
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
X-STACKER2 207A518.00 R 25 Tubeless
10147526910
74.3
50119.7
165665.2
75029.5
5006197.1
7290.7
61224.1
465122.9
13.00/2.5 15.00/2.5
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC1838040528
2228049127
2625057881
<= 10 KM/H<= 6 MP/H
1593035126
1918042292
2275050164
25 KM/H15 MPH
1225027011
1475032524
1750038588
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
1593035126
1918042292
2275050164
25 KM/H15 MPH
1593035126
1918042292
2275050164
COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hourkm mile
e mm inch
D mm inch
R’ mm inch
RC mm inch
Tread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
X-STACKER2 LC 207A518.00 R 25 Tubeless
04218009186
116.8
if load per tyre
<=17.5 t
106.2
if load per tyre >17.5 t
50119.7
165665.2
75029.5
5006197.1
5468
61224.1
465122.9
13.00/2.5 15.00/2.5
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC1838040528
2228049127
2625057881
<= 10 KM/H<= 6 MP/H
1593035126
1918042292
2275050164
25 KM/H15 MPH
1225027011
1475032524
1750038588
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
1593035126
1918042292
2275050164
25 KM/H15 MPH
1593035126
1918042292
2275050164
Machine - Use ( kg - lb) AGV PORT
<= 10 KM/H<= 6 MP/H
1593035126
1918042292
2275050164
25 KM/H15 MPH
1593035126
1918042292
2275050164
34MICHELIN TECHNICAL DATA | 2019 EDITIONINDUSTRIAL,PORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
TYRE LOADS IN KG AND IN LB
33’’COMMERCIAL DESCRIPTION CAI MSPN Max. dist./ hour
km milee
mm inchD
mm inchR’
mm inchRC
mm inchTread depth mm 32rd
Dual Spacingmm inch
Cap. litre gallon
Measuring (2) (3)
Recommended RimOthers Approved (2) (3)
Rim
XZM2+ 214A518.00 R 33 Tubeless (14)
30569698655
106.2
50319.8
184172.5
82632.5
5547218.4
7898.3
60423.8
520137.4
13.00/2.5
Bar 6 8 10Psi 87 116 145
Machine - Use ( kg - lb) MECHANICAL HANDLING, CYCLIC SERVICE
STATIC2250049613
2700059535
3180070119
<= 10 KM/H<= 6 MP/H
1950042998
2340051597
2756060770
25 KM/H15 MPH
1500033075
1800039690
2120046746
Machine - Use ( kg - lb) COUNTERBALANCED LIFT TRUCK, LOAD WHEEL
<= 10 KM/H<= 6 MP/H
1950042998
2340051597
2756060770
25 KM/H15 MPH
1950042998
2340051597
2756060770
35MICHELIN TECHNICAL DATA | 2019 EDITIONINDUSTRIAL,PORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
TYRE LOADS IN KG AND IN LB
The information provided herein is for informational purposes only and may not be used or relied upon for legal or statutory action. For technical and safety reasons,
a tyre should never be used beyond the limits of the technical specifications for which it has been approved and all relevant recommendations as provided herein should be followed. Michelin is not responsible for any use, fitting, storage, maintenance,
or handling outside stated recommendations.
MICHELIN® tyres are designed for a specific use as defined in this catalog. Any other use constitutes an abnormal use. However, in some circumstances, Michelin may issue a waiver which will specify the conditions and the permitted operational limits for a specific application. If a tyre is to be used differently than what it is designed for, please consult your nearest Michelin Representative for further guidance. Michelin expressly denies any responsibility for any abnormal use of its tyres or any use different from the tyre’s intended design in the absence of express written permission (derogation) from an authorized Michelin Representative.
Further, correct usage and maintenance are necessary to achieve proper performance and to maximise life. Therefore, it is recommended that users adhere to all safety and usage recommendations. However, you must note that these recommendations may be subject to more restrictive local legal and/or regulatory requirements.
Specifically, tyre load and pressure tables included in this book are classified according to the various applications of machines. In the load and pressure tables, the shaded boxes indicate the normalized values. These values reflect optimal use, the best balance of performances. Again, these values are given for informational purposes only and may not be used for legal or statutory actions.
Finally, unless otherwise specified, MICHELIN® off-the-road, industrial, and compact LINE tyres comply with internationally accepted standards that are established by TRA (Tyre and Rim Association), ETRTO (European Tyre and Rim Technical Organisation), JATMA (Japan Automobile Tyre Manufacturers Association), and/or ISO (International Standards Organisation). Among other things, the standards encompass load capacity, inflation pressure, overall diameter, overall width, and related valves and rims. Some minor differences may exist between these standards.
SPECIFIC APPLICATIONS
Please note that tyres for mechanical handling equipment used in areas where there is a high risk of fire or explosion, such as the chemical and petrochemical industries, must meet certain standards concerning their electrical resistivity. When the electrical resistance measured according to ISO 16292 or WDK 110 standards is lower than 106 Ohms, then the tyre is called ‘dissipative’ and its sidewall features the following symbol.
PERFORMANCE
Any and all tyre performance claims or comparisons contained herein are for informational purposes only to aid in the selection of a tyre and do not constitute any form of performance guarantee or warranty. Individual results may vary. Such information may not be used as a basis for any performance guarantee or warranty claim.
Following publication, the information herein is subject to change in Michelin’s sole discretion.
INDUSTRIAL TYRES
36MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
HANDLING, PORT, AIRPORT AND INTERMODAL TYRES
MICHELINTECHNICAL DATA
general informationTyre CONSTRUCTION PAGE 38
The Solid Tyre (solid rubber tyre, Pneumatic Shaped Solid, pps) PAGE 38
general information PAGE 39
The different tyre families PAGE 39
The different tyre size designations PAGE 39
Tyre marking PAGE 40
LOAD INDEX AND SPEED SYMBOL PAGE 41
READING GUIDE FOR PRESSURE, LOAD AND USAGE TABLES PAGE 41
Michelin RADIAL TyreS FOR MATERIAL HANDLING PAGE 42
Cyclic service PAGE 42
ADVICE AND RECOMMENDATIONS ON THE USE OF Michelin INDUSTRIAL TyreS PAGE 43
Inserts and solid fills PAGE 43
Nitrogen inflation PAGE 43
OTHER Michelin RADIAL TyreS USED FOR MECHANICAL HANDLING PAGE 44
Conditions of use PAGE 44
COMPONENTS USED WITH MICHELIN INDUSTRIAL AND HANDLING TyreS PAGE 45
MICHELIN TUBELESS BEAD SEAL 8’’ to 20’’ RIMS PAGE 45
APRROVED RIMS PAGE 47
APRROVED RIMS FOR INDUSTRIAL TyreS PAGE 48
FLAP + TUBE SOLUTION PAGE 49
FLAP + TUBE SOLUTION 24’’ & 25’’ RIMS PAGE 50
CORNER SEAL SOLUTION FOR SMALL INDUSTRY ON 20’’ RIMS PAGE 50
O-RINGS SOLUTION PAGE 50
SEALS FOR HANDLING TyreS AND RIMS PAGE 51
VALVES AND ASSOCIATED ACCESSORIES PAGE 52
APPROXIMATE LOOSE MATERIAL DENSITIES UNITS OF MEASURE AND CONVERSION TABLES PAGE 56
UNITS OF MEASURE AND CONVERSION TABLES PAGE 56
FOOTNOTES & CAUTION PAGE 57
37MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
The whole tyre is made of rubber. It is generally composed of at least three different rubber compounds.According to the type of wheel, the construction of the tyre can- Look like a pneumatic tyre, but can be fitted to a multi-piece rim (fig. 1)- Enable, so that once in place, it will lock auto-lock (fig. 2). An extension to its base (called the retainer bead)
is positioned in the rim groove normally provided for receiving the locking ring. Removable parts of the wheel not being provided make it more difficult to retrofit other pneumatic solutions.
▲ THE SOLID TYRE (SOLID RUBBER TYRE, PNEUMATIC SHAPED SOLID, PPS)
“Retainer Bead” Lock
Tread Rubber
Interior Rubber
Sidewall Protection
Base Rubber
Wire Core Reinforcement
Rim
Multi-piece rim (fig. 1)
Other solutions (fig. 2)
TYRE CONSTRUCTION
38MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
▲ THE DIFFERENT TYRE FAMILIESThere are different tyre families categorised by the aspect ratio H/S:(the ratio in % between the sidewall height and the tyre width).H = standard section height S = standard section width
The H/S aspect ratio is approximately equal to 1,00.
STANDARD Tyre (100 SERIES, NARROW BASE)
1 H = 100 % S
The section width, given in inches, is a whole number e.g.: 12.00 R 20or the section width, given in inches, is a whole number followed by a fraction. e.g.: 8.25 R 15 The aspect ratio is not indicated in the size designation.
The nominal section width is expressed as a measurement in millimeters followed by the aspect ratio 65 to 95 (65 in the example).e.g.: 355/65 R 15
EQUIVALENT MARKINGS EXPLANATION
Øof rim
(inches)BIAS MARKING
RADIALMARKING
METRIC TYRE SIZEDESIGNATION
RADIALMARKING
Ø EXT.(INCH)
SECTIONWIDTH
(INCHES)
SECTIONWIDTH(MM)
ASPECTRATIO
H/S
ØOF RIM
(INCHES)
LOADINDEX
SPEEDSYMBOL
PLY RATING(BIAS TYRE)
4 4.80 - 4 4.00 - 4 4.00 4
8 4.80 - 8 4.00 - 8 4.00 8
5.70 - 8 5.00 - 8 5.00 R 8 5.00 8 111 A5 10 PR
15 x 4 - 8 125/75 - 8 15 x 4,5 125 / 75 8 16 PR
16 x 6 - 8 150/75 - 8 150/75 R 8 16 x 6 150 / 75 8 113 A5 16 PR
18 x 7 - 8 18 x 7 180/70 - 8 180/70 R 8 18 x 7 180 / 70 8 125 A5 16 PR
9 21 x 8 - 9 200/75 - 9 200/75 R 9 21 x 8 200 / 75 9 134 A5 16 PR
6.90 - 9 6.00 - 9 6.00 R 9 6.00 9 121 A5 12 PR
10 6.50 - 10 6.50 R 10 6.50 10 128 A5 14 PR
23 x 9 - 10 225/75 - 10 225/75 R 10 23 x 9 225 / 75 10 142 A5 20 PR
12 7.00 - 12 7.00 R 12 7.00 12 136 A5 16 PR
23 x 10 - 12 250/60 - 12 250/60 R12 23 x 10 250 / 60 12 18 PR
27 x 10 - 12 250/75 - 12 250/75 R 12 27 x 10 250 / 75 12 152 A5 20 PR
15 7.00 - 15 7.00 R 15 7.00 15 143 A5 16 PR
7.50 - 15 7.50 R 15 7.50 15 146 A5 16 PR
28 x 9 - 15 8.15 - 15 225/75 - 15 225/75 R 15 28 x 9 225 / 75 15 149 A5 16 PR
8.25 - 15 8.25 R 15 8.25 15 153 A5 18 PR
250 - 15 250/70 - 15 250/70 R 15 250 / 70 15 153 A5 18 PR
300 - 15 315/70 - 15 315/70 R 15 315 / 70 15 165 A5 22 PR
355/65 - 15 355/65 R 15 355 / 65 15 175 A5 28 PR
Low-profile tyres (65 to 95 series, 5 by 5)
The H/S aspect ratio is less than 1 (0.65 in the followed example).
0.65 H = 65 % S
▲ THE DIFFERENT TYRE SIZE DESIGNATIONS
GENERAL INFORMATION
39MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
▲ TYRE MARKING
Position of wear indicator
MICHELIN ® Manufacturer
355 Nominal section width in mm (S = 355 mm)
65 Tyre aspect ratio (H/S = 0,65)
R Radial construction.
15 Nominal diameter of rim to which tyre should be fitted (15 inches)
STABIL’X Old name of the family being deleted
XZM XZM range name
Tubeless Tyre with no tube
170 Load Index
A5 Speed Symbol: 25 km/h
CYCLIC Cyclic use (see explanation on following pages)
Radial X Indication of tyre structure
Electrical conductivity tyre class 1
For special conditions usage, please consult us.
For more details concerning : choice of tyre, use of tyre, fitting, operation pressure and storage
and maintenance, consult USE AND MAINTENANCE GUIDE FOR MICHELIN EARTHMOVER TyreS.
40MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
Industrial and handling tyres bear a Load Index and a Speed Symbol.The LOAD INDEX is a numerical code from international standard tyres, which indicates the reference load capacity.
Loadindex
Loadin kg
Loadindex
Loadin kg
Loadindex
Loadin kg
Loadindex
Loadin kg
Loadindex
Loadin kg
Loadindex
Loadin kg
100 800 120 1400 140 2500 160 4500 180 8000 200 14000
101 825 121 1450 141 2575 161 4625 181 8250 201 14500
102 850 122 1500 142 2650 162 4750 182 8500 202 15000
103 875 123 1550 143 2725 163 4875 183 8750 203 15500
104 900 124 1600 144 2800 164 5000 184 9000 204 16000
105 925 125 1650 145 2900 165 5150 185 9250 205 16500
106 950 126 1700 146 3000 166 5300 186 9500 206 17000
107 975 127 1750 147 3075 167 5450 187 9750 207 17500
108 1000 128 1800 148 3150 168 5600 188 10000 208 18000
109 1030 129 1850 149 3250 169 5800 189 10300 209 18500
110 1060 130 1900 150 3350 170 6000 190 10600 210 19000
111 1090 131 1950 151 3450 171 6150 191 10900 211 19500
112 1120 132 2000 152 3550 172 6300 192 11200 212 20000
113 1150 133 2060 153 3650 173 6500 193 11500 213 20600
114 1180 134 2120 154 3750 174 6700 194 11800 214 21200
115 1215 135 2180 155 3875 175 6900 195 12150 215 21800
116 1250 136 2240 156 4000 176 7100 196 12500 216 22400
117 1285 137 2300 157 4125 177 7300 197 12850 217 23000
118 1320 138 2360 158 4250 178 7500 198 13200 218 23600
119 1360 139 2430 159 4375 179 7750 199 13600 219 24300
The reference load corresponds to the load index of the designation.
The SPEED SYMBOL is a numerical code from international standard tyres, which indicates the maximum speed at which the tyre can carry a load corresponding to its load index, under specified conditions.
Speed symbol a1 a2 A3 A4 A5 A6 A7 A8 B C D E F G J K L
Speed (km/h) 5 10 15 20 25 30 35 40 50 60 65 70 80 90 100 110 120
The shaded box of load/pressure tables is the value defined by the industry standards.
Up to this limit, the tyre works in an optimal zone leading to a better balance of performance.
The use of MICHELIN® tyres outside the specification of load/pressure/use tables must be validated by your Michelin Representative.
The MICHELIN® Radial tyres used in Mechanical Handling and presented in this document are designed for a cyclic service. This is defined as mechanical handling, cyclic service.
▲ LOAD INDEX AND SPEED SYMBOL
▲ READING GUIDE FOR PRESSURE, LOAD AND USAGE TABLES
41MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
▲ CYCLIC SERVICEThe CYCLIC SERVICE covers applications where tyres are not used continually at the load indicated by the load index and at the speed indicated by the speed symbol. They usually operate one way loaded and one way empty: (Typically forklift truck, straddle carrier and terminal tractors. This list is not exhaustive).
In addition, in the case of counterbalance forklift trucks, the steering wheels (rear axles) are at maximum load when the machine is empty, and the drive wheels (front axles) at maximum load when the machine is laden. In the latter case, the front axle called “Counterbalanced lift truck–load carrying wheel,” the tyre is rated to carry up to 130% of the reference
load.
The Counterbalanced lift truck (steer wheel) falls under the other cyclic use.
It is not possible for a tyre to operate carrying more than 130% of the reference load. For Straddle Carrier use, this maximum limit is 105%.
Below this limit, the load table provides information on the evolution of the load according to the maximum speed of the vehicle, for a given pressure.
The graph below shows the basic design of these tables.
Static (150)
Reference load
Load
/ Re
fere
nce
load
(%)
Maximum tyre speed (km/h)
80
5 10 15 20 25(A5) 30 35(A7) 40 45 50(B) 550
90
100
110
120
130 130 130
105105
100
84
92,5
125
140
150
160
According to the maximum speed capacity of the tyre
1 - Counterbalanced lift truck load carrying wheel (driving wheel)
2 - Straddle carriers
3 - Other
cyclic use
Load VS. speed curve at A GIVEN PRESSURE
3 - Other Cyclic use2 - Straddle carrier
1 - Counterbalanced lift truck load carrying wheel (driving wheel)
It is imperative:
• Not to exceed the maximum speed of the tyre (marked on the tyre and/or specified in this document).• Not to exceed the permitted maximum distances in one hour indicated in the tables presented in this document.• At the time of fitting, it is vital to check the markings, in order to make sure that the tyre is suitable
for operation at the maximum allowed vehicle speed and load.
In the case where the maximum speed of the machine exceeds the tyre Speed Symbol, it is necessary to consult your local Michelin Representative. In the case of acceptance, the load capacity of the tyre will be reduced.
3 - Counterbalanced lift truck (steer wheel)
MICHELIN RADIAL TYRES FOR MATERIAL HANDLING
42MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
▲ NITROGEN INFLATION
IntroductionUnder most circumstances, the air inflation is suitable for our tyres and allows them to work in the best conditions.
When should nitrogen inflation be recommended ?Nitrogen, an inert and stable gas with a larger molecule,diffuses more slowly than oxygen through rubber, limiting the risk of oxidation of different parts of the tyre (rubber, cables, etc.). It also slows the loss of inflation pressure.
Nitrogen inflation is recommended when working under the following conditions:
- Areas where there is a risk of explosion
- Working with or in areas involving high-temperature liquids (e.g., foundries, glass works, etc.)
- Working in areas where there is a risk of electrical discharge (close to high tension cables, etc.)
- Working where overheating of a tyre has been caused by:
• Intensive driving (speed, distance, intensity of the cycles)
• Excessive overheating of a mechanical unit (transmission or brakes for example
Equipment necessaryTo install an effective inflation system, Michelin
recommends:- 2 gas bottles of compressed nitrogen- 1 nitrogen regulator- An inflation tool in compliance with local regulations.
SUPPLIERS: Contact your local specialist in compressed gases.
Volume of nitrogen necessary to inflate a tyreThe quantity of nitrogen necessary to inflate a tyre is proportional to its internal volume and the inflation pressure required.
The volumes of the industrial tyres are shown in the following tables (characteristics of MICHELIN® Industrial Tyres).
Example: 250 / 70 R 15 XZM TL Interior volume is 39 litres. For a pressure of 10 bars, the quantity of nitrogen needed is: 39 x 10 = 390 litres.
The preceding information is extracted from the USE AND MAINTENANCE GUIDE
FOR MICHELIN® EARTHMOVER TYRES.For more details, consult our website
www.michelinearthmover.com OR YOUR MICHELIN REPRESENTATIVE.
▲ INSERTS AND SOLID FILLS
Inserts and solid fills are sometimes used in lieu of air or nitrogen. This technique is adapted for specific uses.
Some performance is reduced (lower operating speed) and the comfort of the driver of the machine downgraded significantly.
Their implementation requires qualified personnel.
Nitrogen inflation is a well-adapted solution for use
with mechanical handling equipment.
CAUTION: Nitrogen inflation equipment should only be
used by properly trained individuals. A properly functioning regulator must always be used and all
manufacturer’s instructions followed. Failure to do so can lead to personal injury.
!
ADVICE AND RECOMMENDATIONS ON THE USE OF MICHELIN INDUSTRIAL TYRES
43MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
▲ CONDITIONS OF USEThe range of MICHELIN® industrial tyres has been specifically designed to equip industrial machines.The sizes are specific to these machines and their work; the loads and speeds correspond to standardised figures.
Each time tyres need to be fitted to mechanical handling equipment, the following rules should be followed: 1°) When the tyre size exists in the industrial tyre range, the industrial tyre must be used.2°) When size does not exist in the industrial tyre range, it may be necessary to consult other tyre ranges
(Agriculture, Truck or Earthmover), whose characteristics are compatible.
In all cases, contact your Michelin Representative who will be able to guide you on the best solution.Technical validation will be provided by Michelin Representative for these uses.
OTHER MICHELIN RADIAL TYRES USED FOR MECHANICAL HANDLING
44MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
TUBELESS BEAD SEAL DefinitionThe TBS is a special device allowing the fitment of tubeless tyres as tubeless on tube-type rims.It consists of a ring of special rubber, which is placed inside the tyre and fits between the tyre beads.It ensures the airtightness of the wheel and tyre assembly. Valves and plug can be ordered separately, if required.RANGE (for fitment with XZM TL up to and including 20")
*See approved rims 47
RIM & Tyre SIZE MICHELIN TUBELESS BEAD SEALS (TBS) (INDIVIDUAL PACKAGING)
RIM Ø (INCHES)
RIM WIDTH (INCHES)
TYRE SIZE DESCRIPTIONVALVE REF.
+ PLASTIC PLUG R2110 (*)CAI
(TBS + VALVE + PLUG)
8
3.00 D3 1/4 I
5.00 R 8 80 TL 8 R 2160 102150
4.33 R150/75 R 8 180/70 R 8
110 TL 8 R 2102 613972
94.00 E 6.00 R 9 (1) 100 TL 9 R 2160 102151
6.00 E 200/75 R 9 150 TL 9 R 2102 + (*) 102182
105.00 F 6.50 R 10 (1) 125 TL 10 R 2102 102183
6.50 F 225/75 R 10 165 TL 10 R 2102 + (*) 102184
125.00 S 7.00 R 12 (1) 125 TL 12 R 2161 522788
8.00 G250/60 R 12 250/75 R 12
200 TL 12 R 2102 + (*) 787198
15
5.5 7.00 R 15 140 TL 15 R 2102 454346
6.07.00 R 15 7.50 R 15
150 TL 15 R 2102 + (*) 702507
6.57.50 R 15 8.25 R 15
165 TL 15 R 2102 + (*) 575769
7.08.25 R 15
225/75 R 15 250/70 R 15
175 TL 15 R 2102 + (*) 260511
7.5 250/70 R 15 190 TL 15 R 2102 + (*) 464164
8.0 315/70 R 15 200 TL 15 R 2102 + (*) 609679
9.75 355/65 R 15 250 TL 15 R 2102 + (*) 026320
20
7.0 9.00 R 20 10.00 R 20
175 TL 20 R 2102 + (*) 102087
7.59.00 R 20 10.00 R 20 11.00 R 20
190 TL 20 R 2102 + (*) 102083
8.010.00 R 20 11.00 R 20 12.00 R 20
200 TL 20 R 2102 + (*) 102085
8.511.00 R 20 12.00 R 20
215 TL 20 R 2102 + (*) 102086
Never reuse O-rings, valve seals or the valves themselves!
FITTING WITH CORNER SEAL ON MULTI-PIECES FLAT BASE OR 5° TAPER BEAD 2 SEATS RIMS : REFER TO 50(1) Exists also in XZR pattern
▲ MICHELIN TUBELESS BEAD SEAL 8’’ TO 20’’ RIMSSOLUTION FOR XZM
COMPONENTS USED WITH MICHELIN INDUSTRIAL AND HANDLING TYRES
45MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
Size markings
Example of marking: 110 TL 8 (for 4.33R - 8 rim)
110: indicates the width of the TBS in mm
TL for a tubeless tyre
8 indicates the rim diameter in inches
The choice of TBS depends on the width of the rim on which the tyre is to be fitted.
The allowed rim width(s) are indicated on each tubeless bead seal.
TBS fitted on wheels with width less than 6 inches have a chimney where the valve will be positioned.
TBS for wheels with width greater than or equal to 6 inches have two chimneys; one central and the other offset to allow correct positioning relative to the valve sleeve. The chimney which is not used by the valve is sealed with a plastic plug (supplied with the TBS).
CROSS SECTION OF A FITTED TBS
Cross section of a TBS
Special collared valve
Principle
Valves for TBS REF. CAI α L1 L2 L3 e collar
Small valve, small collar R2160 564220 94° 37 mm 18 mm 25 mm 3 mm 11 x 24 mm
Small valve, standard collar R2102 563008 94° 37 mm 16 mm 25 mm 5 mm 14 x 25 mm
Large valve, standard collar R2161 158244 94° 36,5 mm 11 mm 55 mm 5 mm 14 x 25 mm
Plug REF. CAI
R2110 579048
Tubeless bead seal in place
after in�ation
silhouette of TBS before compression
valve slotFlat base or 5° multipiece rim
width (in mm)
rim diameter (in inches)
L1 L2
L3
e
special valve
collar
collar
Tubeless bead seal
46MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
Rim typesRim
design.
Fmm
inches
H (13)
mminches
D (13b)
mminches
RIMR/A(**)
Tyre sizesSEAL
TL TT
Flat-base rims
Rim
diam
eter
8 - 4.33 R 110 28,5 209,2 202,4 R 180/70 R 8None4.3 1.1
15 - 6.00 S 152,4 33,3 387,0 381,0 R 7.50 R 156.0 1.3
20 - 7.33 V186
7.3
44
1.7
511,2 508,0
A 9.00 R 20 XZM
R 1443
Tyran
(A 20)
2 2A 10.00 R 20 XZM 2 2A 11.00 R 20 XZM 2 2
20 - 8.00 V 203 44 A 10.00 R 20 XZM 2 28.0 1.7 A 11.00 R 20 XZM 2 2
20 - 8.50 V 216 44 A 11.00 R 20 XZM 2 28.5 1.7 A 12.00 R 20 XZM 2 2
20 - 9.00 V 228,5 44 A 12.00 R 20 XZM 2 29.0 1.7
24 - 8.50 V 216 44
612,8 609,6
A 12.00 R 24 XZM G25 2 28.5 1.7
24 - 9.00 V 228,5 44 A 12.00 R 24 XZM G25 2 29.0 1.7
24 - 10.00 W 254 51 A 14.00 R 24 XZM10.0 2.05° taper bead 2-seat rims
D
HF
(removable bead seat, split)
20 - B 6.5 165 38
512,8 512,8
A 9.00 R 20 XZM
R 1443
Tyran
(A 20)
NA 26.5 1.5
20 - B 7.0 178 38 A 9.00 R 20 XZM NA 27.0 1.5 A 10.00 R 20 XZM NA 2
20 - B 7.5190,5
7.5
43
1.7
A 9.00 R 20 XZM NA 2A 10.00 R 20 XZM NA 2A 11.00 R 20 XZM NA 2
20 - B 8.0 203 43 A 10.00 R 20 XZM NA 28.0 1.7 A 11.00 R 20 XZM NA 2
20 - B 8.5 216 45,5 A 11.00 R 20 XZM NA 28.5 1.8 A 12.00 R 20
24 - B 8.5 216 45,5 A 12.00 R 248.5 1.85° taper bead 2-seat rims(advanced rim)
D
HF
(removable bead seat, split)
8 - 3.00 D 76 18
202,4A 5.00 R 8
None
3.0 0.78 - 3 1/4 I(divided rim)
82,5 16 R 5.00 R 83.2 0.6
8 - 5.00 F 127 22,5 202,4 R 180/70 R 85.0 0.99 - 4.00 E 101,5 20 227,8 R 6.00 R 94.0 0.8
10 - 5.00 F 127 22,5
253,2
R 6.50 R 105.0 0.9
10 - 5.50 F 140 22,5 A 6.50 R 105.5 0.9
10 - 6.50 F 165 22,5 R 225/75 R 106.5 0.912 - 5.00 S
(and divided rim)127 31,5 308,8 R 7.00 R 125.0 1.2
12 - 8.00 G 203 28 304,0 R 250/75 R 128.0 1.1
15 - 5.5 139,5 30,5
387,4 387,0
R 7.00 R 155.5 1.2
15 - 6.0 152,5 33 A 7.00 R 156.0 1.3 R 7.50 R 15
15 - 6.5 165 35,5 A 7.50 R 156.5 1,4 R 8.25 R 15
15 - 7.0178 38
387,4 387,0
R 225/75 R 15
None
7.0 1.5 A 8.25 R 15A 250/70 R 15
15 - 7.5 190,5 40,5 R 250/70 R 157.5 1.6
15 - 8.0 203 43 R 315/70 R 158,0 1.7
15 - 9.75 247,5 38 R 355/65 R 159.7 1.5
** R = Recommended - A = Allowed
▲ APRROVED RIMS
*See page 57 for footnotes.
47MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
Rim typesRim
design.
Fmm
inches
H (13)
mminches
D (13b)
mminches
RIMR/A(**)
Tyre sizesSEAL
TL TT
5° taper bead 2-seat rims(advanced rim)
(removable bead seat, split)
20 - 6.5 165 35,5
514,4 514,0
A 9.00 R 20 XZM None NA 06.5 1.4
20 - 7.0 178 38 R 9.00 R 20 XZM None NA 07.0 1.5 A 10.00 R 20 XZM None NA 0
20 - 7.0 T 177,8 38,1 R 9.00 R 20 XZM None NA 07.0 1.5 R 10.00 R20 XZM
20 - 7.5190,5
7.5
40,5
1.6
A 9.00 R 20 None NA 0R 10.00 R 20 None NA 0A 11.00 R 20 None NA 0
20 - 8.0203
8.0
43
1.7
A 10.00 R 20 None NA 0R 11.00 R 20 None NA 0A 12.00 R 20 None NA 0
20 - 8.0 V 2038.00
27,51.1
R 10.00 R 20 XZM None NA 2R 11.00 R 20 None
20 - 8.5 216 45,5 A 11.00 R 20 XZM None NA 08.5 1.8 R 12.00 R 20 XZM
20 - 8.5 V 216 44,4 R 11.00 R 20 None8.5 1.7 R 12.00 R 20
20 - 9.0 228,5 48,5 A 12.00 R 20 XZM None NA 09.0 1.9
24 - 8.5 216 45,5
616,0 615,5
A 12.00 R 24XZM G25 NA 28.5 1.8
24 - 9.0 228,5 48,5 A 12.00 R 24 XZM G25 NA 29.0 1.9
24 - 10.0 254 50,8 R 14.00 R 24 XZM None NA 010.0 2.05° taper bead-seat rims
(3 pieces)
Rim
diam
eter
(*) New wheels have additional marking “IF.” The IF flanges feature an Integrated Flange, suited for Radial tyres. The width of the flange is larger.
24 - 10.00 WA254
10.0
51
2.0614,4 R 14.00 R 24 XZM
Sulla(OR
3-25)1 0
25 - 11.25/2.0 IF(*)284
11,2
51
2,0635,0
R 16.00 R 25Sulla(OR
3-25)25 - 13.00/2.5 IF(*)
330
13.0
63,5
2,5R 18.00 R 25
taper bead-seat rims
(3 pieces)
24 - 10.00 WA254
10.0
51
2.0614,4 14.00 R 24 XZM
Sulla(OR
3-25)
5° taper bead-seat rims(5 pieces)
Rim
diam
eter
25 - 11.25/2.0 284 51
635,0
R 16.00 R 25
Sulla(OR
3-25)
11.2 2.0
25 - 13.00/2.0 330 51 A 16.00 R 2513.0 2.0
25 - 13.00/2.5 330 63,5 R 18.00 R 2513.0 2.5 R 480/95 R 25
25 - 15.00/2.5 381 63,5 A 18.00 R 2515.0 2.5
33 - 13.00/2.5330 63,5
838,2 R18.00 R 33 Strix
(OR 3-33)13.0 2.5
15° taper drop-centER rims
22.5 x 8.25209,5
8.25
12.7
0.5
571,5
A 280/75 R 22.5 XTT
None
R310/80 R 22.5 XTT
(except AIM Zone)
22.5 x 9.00228.69.00
12.70.5
R
310/80 R 22.5
F
H
A’
Rim
diam
eter
D
HF
** R = Recommended - A = Allowed
▲ APRROVED RIMS FOR INDUSTRIAL TYRES
*See page 57 for footnotes.
48MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
▲ FLAP + TUBE SOLUTION
RIM & Tyre SIZE
FLAPS (FITTING ONLY ON FLAT BASE RIM OR
SEMI DROP CENTER RIM 1 OR 2 TAPERED BEADS SEAT 5°)
(PACKAGING = 5)
TUBES(FOR RIMS WITH OFFSET HOLE, PLEASE USE CONVENIENT FLAPS AND TUBES)
RIM Ø (INCHES)
Ø WIDTH RIMRECOM-MENDED (INCHES)
TYRE SIZE DESCRIPTION CAI DESCRIPTION (PACKAGING) VALVE TYPE
ETRTO / TRA REF.
MI REF. CAI
8
- 125/75 R 8 - -8B (60)
WITHOUT (UPLR1548) - - 101003
SINGLE BEND V3-02-5 1003 101004
3.00 D3 1/4 I3.50 D
5.00 R 8 83-8 L E 437837 8CG (32)
WITHOUT (UPLR R1548) - - 101011
4.33 R 150/75 R 8 - - SINGLE BEND V3-02-2 570 101013
4.33 R 180/70 R 8 - -8D (32)
WITHOUT (UPLR R1548) - - 101021
SINGLE BEND V3-02-2 570 101022
94.00 E 6.00 R 9 110-9 LD E 387950 9F
(16)
WITHOUT (UPLR R1548) - - 101039
6.00 E 200/75 R 9 - - SINGLE BEND V3-02-2 570 101040
10
5.00 F 5.50 F
6.50 R 10 150-10 LD E 299713 10F (16)
WITHOUT (UPLR R1548) - - 101047
6.50 F 225/75 R 10 - - SINGLE BEND V3-02-23 1012 101049
12
5.00 S 7.00 R 12 125-12 LD E 243961 12H (16)
WITHOUT (UPLR R1548) - - 101077
8.00 G 250/60 R 12 - - DOUBLE BEND V3-04-1 578 101078
8.00 G 250/75 R 12 - -12KD (*)
(16)DOUBLE BEND V3-04-1 578 101123
15
5.5 6.0
7.00 R 15 15x6.00 E 843437 15/16F (16)
SINGLE BEND V3-02-2 570 101071
7.0 225/75 R 15 15x7.50 E 904287
6.0 6.5
7.50 R 15 15x6.00 E 84343715/16J (16)
WITHOUT (UPLR R1548) - - 101107
SINGLE BEND V3-02-2 570 101106
7.0 7.5
250/70 R 15 15x7.50 E 904287 DOUBLE BEND V3-05-1 1221 101146
6.58.25 R 15
15x6.00 E 843437 15K (12)
WITHOUT (UPLR R1548) - - 101124
SINGLE BEND V3-02-9 1156 101128
7.0 15x7.50 E 904287 DOUBLE BEND V3-05-1 1221 101126
8.0 315/70 R 15 15x7.50 E 90428715P (7)
WITHOUT (UPLR R1548) - - 510208
TRIPLE BEND V3-06-5 582 510204
9.75 355/65 R 15 See TBS - See TBS - - - -
20
7.0 7.5
9.00 R 2020x7.50 E 320222 20M
(9)
WITHOUT (UPLR R1548) - - 101149
SINGLE BEND V3-02-12 1157 101153
20x7.50 EM 627065 TRIPLE BEND V3-06-3 581 101154
7.0 7.5 8.0
10.00 R 2020x7.50 E 320222 20N
(7)
WITHOUT (UPLR R1548) - - 101158
SINGLE BEND V3-02-14 1158 101161
20x7.50 EM 627065 TRIPLE BEND V3-06-5 582 101162
7.5 8.0 8.5
11.00 R 20
20x8.50 E 16231820P (6)
WITHOUT (UPLR R1548) - - 101171
SINGLE BEND V3-02-14 1158 101173
20x8.50 EM 726102TRIPLE BEND V3-06-5 582 101174
FIXED TR78A TR78A 008811
8.0
12.00 R 20
20x8.50 E 16231820Q (5)
WITHOUT (UPLR R1548) - - 101190
SINGLE BEND V3-02-15 1338 101185
8.5 20x8.50 EM 726102SINGLE BEND V3-02-14 1158 101192
TRIPLE BEND V3-06-5 582 101193
(*) 12KD, CAI 101123, offset valve: 20 mm
49MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
RIM Ø (INCHES)
Ø WIDTH RIMRECOMMENDED
(INCHES)TYRE SIZE DESCRIPTION MICHELIN REF. CAI PACKAGING
2410.00W
10.00WA 10.0
14.00 R 24
OR 3-25 SULLA R1437 553200 20
25
11.25/2.0 13.00/2.0
16.00 R 25
11.25/2.0 13.00/2.0
450/95 R 25
11.25/2.0 13.00/2.5
480/95 R 25
13.00/2.5 15.00/2.5
18.00 R 25
RIM & Tyre SIZEFLAPS
(FITTING ONLY ON FLAT BASE RIM OR SEMI DROP CENTER RIM 1 OR 2 TAPERED BEADS SEAT 5°)
(PACKAGING = 5)
TUBES(FOR RIMS WITH OFFSET HOLE, PLEASE USE CONVENIENT FLAPS AND TUBES)
RIM Ø (INCHES)
Ø WIDTH RIMRECOMMENDED
(INCHES)TYRE SIZE DESCRIPTION CAI DESCRIPTION
(PACKAGING) VALVE TYPEETRTO /
TRA REF.
MI REF. CAI
24
8.5 9.0
8.5V 9.00V
12.00 R 24 24/25x8.50 E 018130 24Q (4)
WITHOUT (UPLR R1548) - - 101194
TRIPLE BEND V3-06-5 582 101196
10.00W 10.00WA
10.0 14.00 R 24 - -
24/25T (3)
WITHOUT (UPLR R1548) - - 514507
SINGLE BEND V3-02-17 752 514503
SINGLE BEND V3-02-3 576 514500
24/25T AM (3)
SINGLE BEND V5-04-1 TRJ650
1837 101781
25
11.25/2.0 13.00/2.0
16.00 R 25
- -
24/25V AM (1)
SINGLE BEND V5-04-1 TRJ650
1837 101811
11.25/2.0 13.00/2.0
450/95 R 25 25W AM
(1) SINGLE BEND
V5-04-1 TRJ650
1837 101871
11.25/2.0 13.00/2.5
480/95 R 25 25W AM
(1) SINGLE BEND
V5-04-1 TRJ650
1837 101871
13.00/2.5 15.00/2.5
18.00 R 25 25W AM
(1) SINGLE BEND
V5-04-1 TRJ650
1837 101871
RIM Ø (INCHES)
RIM WIDTH (INCHES)
TYRE SIZE DESCRIPTION MICHELIN REF. CAI PACKAGING
20
7.33V - 8.00V 8.50V - 9.00V
B6.5 - B7.0 7.0T - B7.5 B8.0 - 8.0V B8.5 - 8.5V
9.00 R 20 10.00 R 20 11.00 R 20 12.00 R 20
A 20 TYRAN R 1443 553004 30
▲ FLAP + TUBE SOLUTION 24’’ & 25’’ RIMS
▲ CORNER SEAL SOLUTION FOR SMALL INDUSTRY ON 20’’ RIMS
▲ O-RINGS SOLUTION
50MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
Flap markingsFlaps which contain the letter “D” in their description have an offset valve hole (e.g.: 125-12 LD). Check before fitting or centering the valve hole on the rim.
Example 1: 83-8 LEThe first number indicates the profile width of the flap expressed in mm. In this example, the profile width of the flap is 83 mm.
The second number indicates the tyre seat diameter expressed in inches, with which the flap to is be used.
In this example, the flap may be used with 8-inch tyres.
The letter L indicates that the edges are tapered.
Letters correspond to the last generation of flaps.
Example 2: 20 x 8.50 EThe first number indicates the tyre seat diameter, expressed in inches, with which the flap is to be used.
In this example, the flap may be used with 20-inch tyres.
The second number indicates the overall width of the flap (width + height), in inches.
In this example, the overall width of the flap is 8.50 inches.
Letters correspond to the last generation of flaps.
Example 3: 16-24/25The first number indicates the total width of the flap (includes height of edges), expressed in either mm or in inches.
In the example above, the width of the flap is 16 inches. The second number indicates the rim diameter or the tyre bead seat (rim) diameter in inches, with which the flap is to be used. In this example, the flap may be used with 24- and 25-inch tyres.
Additional letters may be used to provide supplementary information. For example, the significance of different letters is as follows:
L – the edges are tapered, B – the flap has a reinforcing boss around the valve position, S – the flap is reinforced, D – offset hole for valve.
▲ SEALS FOR HANDLING TYRES AND RIMS
Name Designation Reference C.A.I. Type Remarks
Tyran A 20 R 1443 553 004 Corner seal for 20" tyres
Heupo OR 2 - 25 R 1438 553 201 O-ringfor 25" rim (3 pieces not IF) or for 24” rim 10.00VA
Sulla OR 3 - 25 R 1437 553 200 O-ringfor 25" rim (3 pieces IF or 5 pieces) or for 24" 10.00WA
Strix OR 3 - 33 R 1440 553 203 O-ring for 33" rim
Seal description
Explanation of the sealing ring designation
The first number is the section diameter of the seal:
- Or: Abbreviation of o-ring
- Imperial number: value expressed in 1/8 of inch (3 = 3/8)
- Decimal number: value expressed in mm (6.6 = 6,6 mm)
The second number is the nominal bead seat diameter, expressed in inches.
Explanation of the corner seal designation
The letter indicates the profile of the seal.
The number is the nominal rim diameter,
in inches.
Note:
Approval for use of corner seals MUST BE obtained from Michelin.
O-ring Corner seal
Tube markings
Example: 1: 24/25 T 2: 25 W AMThe first two numbers indicate the bead seat (rim) diameter of the tyre into which the tube can be fitted.
(In the first example, the tube may be fitted in 24- and 25-inch tyres. In the second example, the tube may be fitted only in 25-inch tyres.)
The first letter corresponds to the section width of the tube (internal width of the tyre), this ranges from A to Z, with A being the smallest (in the examples above, T and W indicate that the tubes are designed for fitting into tyres of relatively large section
width).
Sometimes, a second letter provides additional information:B, E, F and H, which indicate intermediate widths.
The third and fourth letters are an indication of the valve type.
AM indicates that the tube is fitted with an American valve base, R1946 (TRA SP4000) and a valve stem R1837 (TRJ 650).
D would indicate that the valve is offset.
T would indicate a tractor tube fitted with an air-water valve, ex. type TR 218A.
Explanation on valves and valve bases are given on subsequent pages.
51MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
▲ VALVES AND ASSOCIATED ACCESSORIES
▲ FOR INDUSTRIAL AND HANDLING TYRES AND RIMS IN ALL CASES, THE VALVE CAP IS ESSENTIAL BECAUSE IT HELPS MAINTAIN THE CLEANLINESS OF THE MECHANISM AND ENSURE AIR TIGHTNESS OF THE VALVE.
Car tube-type straight valve
Valve markingsThe valve is circular and is marked in accordance with ETRTO standards, starting at the top of the valve, and in the following order:- NAME (or trademark) of the valve manufacturer and his reference number- ETRTO reference number
Fitting a universal valve on a Michelin® tube with a valve base
1 - Position the sealing ring on the valve. The sealing ring must be clean and dry.
2 - Hand tighten the valve until it just touches the sealing ring.3 - Tighten the valve for a further two turns.4 - To orientate the valve in the desired position, tighten further.
IMPORTANT: never unscrew the valve to the desired position.
Small truck universal straight valveFitted to MICHELIN® tubes for the occasional equipment Tube-Type on 5° and 15° non-U-taper, drop center rim.
valve base
40
rubber sealing ring
52MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
Truck–type, universal single-bend valve
Michelincode
ETRTODesignation
A Bα°
mm inches mm inches
570 V3-02-2 22,5 0.89 43 1.69 120576 V3-02-3 33 1.30 44,5 1.75 95752 V3-02-17 20,5 0.81 156,5 6.16 901012 V3-02-23 30 1.18 65 2.56 901021 V3-02-10 20,5 0.81 115 4.53 941156 V3-02-9 20,5 0.81 99,5 3.92 941157 V3-02-12 20,5 0.81 132 5.20 941158 V3-02-14 20,5 0.81 138,5 5.45 94
Truck–type, universal double-bend valve
Michelincode
ETRTODesignation
α1° α2°
578 V3-04-1 90 140
A B Cmm inches mm inches mm inches
20.5 0.81 32 1.26 37 1.46
Truck–type, universal triple-bend valve
Michelincode
ETRTODesignation
α1° α2° α3°
582 V3-06-5 90 139 139
A B C D
mm inches mm inches mm inches mm inches
20,5 0.81 131 5.16 49 1.93 62,5 2.46
A
A
α
α1
α2
B
B
C
A α1
α2
α3
DB
C
h
A
A
α
α1
α2
B
B
C
A α1
α2
α3
DB
C
h
A
A
α
α1
α2
B
B
C
A α1
α2
α3
DB
C
h
53MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
Types of tubeless earthmover valves
TYPE A1 dTYPE A1
tyre side
valve mountingside
100 mm100 mm 100 mm100 mm
tyre side
valve mountingside
type A1 valve
VALVE TYPE A2 VALVE TYPE A3
VALVE COMBINATION TYPE A4 Comprised of two TYPE A1 valves, both set at 100 mm from the rim edge, to enable water filling.
54MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
AIR AND WATER AGRICULTURAL-TYPE VALVE BASE
ref. 1224 code TR 218A
Allows tyre to be water-filled.Valve with core holder 1139 and plastic nut ref. 1225
valve core holder ref. 1139
n°3 O-ring ref. 4013 to lubricate
nut ref. 1225
Earthmover tubeless valve (American, TRA standard)
A
Embase SP2
α B
Michelincode
TRAcode
ETRTODesignation
A Bα°
mm inches mm inches
R 1837 TRJ 650 V5-04-1 27 1.08 79 3.12 100°
Valves used on a SP2 American valve base[20.5 mm (0.8 inch) diameter hole] and also on AM tubes.
Valve base
valve base
ACTUAL VALVE(mounting with tube)
rubber valve base tube
ball
spring
previous metallic valve base earth mover tube type (ø20mm)
metallic valve base earthmover tube-type AM (ø15.3mm)
metal support plate
ref. 1955
inner tube
valve TRJ 650ref. 1837
flap without insertrim
55MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
Measurement Abbreviation Conversionfactor Abbreviation Measurement Conversion
factor Abbreviation
TORQUE
pound-foot lb ft x 0.1383 = m kg kilogamme metre x 7.233 = lb ftkilogamme metre m kg x 9.81 = m N Newton metre x 0.102 = m kgLENGTH
inch in x 0.0254 = m metre x 39.37 = infoot ft x 0.3048 = m metre x 3.281 = ftyard yd x 0.9144 = m metre x 1.0936 = ydmile ml x 1.6093 = km kilometre x 0.6214 = mlLoad
pound lb x 0.4536 = kg kilogramme x 2.205 = lblong tonne (G.B.) 2240 lb lg tonne x 1.016 = t metric tonne x 0.984 = lg tonneshort tonne (U.S.) 2000 lb sh tonne x 0.907 = t metric tonne x 1.103 = sh tonneDENSITy
pound per cubic foot lb/cu ft x 16.0184 = kg/m3 kilogramme/m3 x 0.625 = lb/cu ftpound per cubic yard lb/cu yd x 0.5933 = kg/m3 kilogramme/m3 x 1.686 = lb/cu ydPRESSURE
kilo-pascal kPa x 0.01 = bar bar x 100 = kPaatmosphere (at sea level) atm x 0.986 = bar bar x 1.014 = atmpound per square inch P.S.I. x 0.0703 = kg/cm2 kilogramme/cm2 x 14.22 = P.S.I.pound per square inch P.S.I. x 0.069 = bar bar x 14.513 = P.S.I.pound per square inch P.S.I. x 0.068 = atm atmosphere x 14.7 = P.S.I.pound per square inch P.S.I. x 6.895 = kPa kilo Pascal x 0.145 = P.S.I.POWER
french horse power C.V. x 0.7355 = KW kilowatt x 1.36 = C.V.horse power H.P. x 0.7457 = KW kilowatt x 1.34 = H.P.french horse power C.V. x 0.98 = H.P. horse power x 1.014 = C.V.VOLUME/CAPACITy
cubic foot cu ft x 0.02832 = m3 cubic metre x 35.31 = cu ftcubic yard cu yd x 0.7646 = m3 cubic metre x 1.308 = cu ydgallon (U.S.) gal x 3.7854 = l litre x 0.2642 = galTEMPeRATURE
degree fahrenheit °F - 32 et x (5/9) = °C degree Celsius x (9/5) et + 32 = °F
▲ UNITS OF MEASURE AND CONVERSION TABLES
APPROXIMATE LOOSE MATERIAL DENSITIES UNITS OF MEASURE AND CONVERSION TABLES
56MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
(2) ...................... See page 40 ........... explanation of the different characteristics
(3) ...................... See page 47 & 48 ........................................ rim characteristics
(8) .......................................................................................... to be discontinued
(9) ......................... the 24-10.00 VA rim is not allowed with the 14.00 R 24 XZM 193A5 tyre,
(10) ..............................all machines fitted with XZM tyres to 12.00 R 24 must not exceed 15 km in one hour, and peak speed is limited to 35 km/h
(11) ....................... all machines fitted with 20” XZM tyres must not exceed 15 km in one hour, and peak speed is limited to: 35 km/h peak speed for Forklift truck
40 km/h peak speed for Terminal tractors and RORO tractors
(12) ...............................terminal tractors fitted with X TERMINAL-T tyres must not exceed 20 km in one hour in cyclic use,and peak speed is limited to 40 km/h
(14) .............................all machines fitted with XZM2 and XZM2+ tyres must not exceed 10 km in one hour in cyclic use,and peak speed is limited to 25 km/h
(15) .............................all machines fitted with XZM tyres > 12.00 R 24 must not exceed 15 km in one hour and are limited to 25 km/h peak speed
(16) ..................... straddle carriers fitted with X-STRADDLE tyres must not exceed 12 km in one hour,and peak speed is limited to 30 km/h
(17) .............................. straddle carriers fitted with X-STRADDLE2 tyres must not exceed 15 km in one hour,and peak speed is limited to 35 km/h
(18) ..........................all machines fitted with X-STACKER tyres must not exceed 5 km in one hour in cyclic use and are limited to 25 km/h peak speed
(13) ........................................The removable flange must be continous along its circumference, with no opening
(13B) ........................................Diameter: Left column, fixed side; right column, removable side.
All MICHELIN® industrial tubeless tyres marked “MAY BE USED WITH A TUBE” can be fitted with tube and flap.
All values shown in these tables are maximums and should not be exceeded.
FOOTNOTES & CAUTION
57MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
NOTES
58MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
NOTES
59MICHELIN TECHNICAL DATA | 2019 EDITIONHANDLING, PORT, AIRPORT AND INTERMODAL TYRES
michelinTECHNICAL DATA HANDLING, PORT, AIRPORT
AND INTERMODAL TYRES
HEADQUARTERSManufacture Française des Pneumatiques Michelin partnership limited by shares with capital of 504 000 004 € Registered office: Place des Carmes Déchaux - 63040 CLERMONT-FERRAND Cedex 9 - FRANCETel.: +33(0)4 73 32 20 00
855 200 507 RCS Clermont-Ferrand© 2019 - Michelin Tyre PLC
2019MICHELIN
TECHNICAL DATA
HANDLING, PORT, AIRPORTAND INTERMODAL TYRES