microsoft actualanswers 70-412 exam questions & answers · microsoft actualanswers 70-412 exam...

Microsoft Actualanswers 70-412 Exam Questions & Answers

Number: 70-412Passing Score: 800Time Limit: 120 minFile Version: 25.7

http://www.gratisexam.com/

Microsoft 70-412 Exam Questions & Answers

Exam Name: Configuring Advanced Windows Server 2012 Services

For Full Set of Questions please visit: http://www.actualanswers.com/newexams/70-412.htm

Actualanswers

QUESTION 1You have a DHCP server named Server1. Server1 has one network adapter. Server1 is located on a subnet named Subnet1. Server1 has scope named Scope1.Scope1 contains IP addresses for the 192.168.1.0/24 network.

Your company is migrating the IP addresses on Subnet1 to use a network ID of 10.10.0.0/16.

On Server1, you create a scope named Scope2. Scope2 contains IP addresses for the 10.10.0.0/16 network.

You need to ensure that clients on Subnet1 can receive IP addresses from either scope.

What should you create on Server1?

A. A multicast scopeB. A scopeC. A superscopeD. A split-scope

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/dd759168.aspx

QUESTION 2Your network contains an Active Directory domain named adatum.com. The domain contains a domain controller named DC1 that runs Windows Server 2012.

On Dc1, you open DNS Manager as shown in the exhibit. (Click the Exhibit button.)

You need to change the zone type of the contoso.com zone from an Active Directory-integrated zone to a standard primary zone.

What should you do before you change the zone type?

A. Unsign the zone.B. Modify the Zone Signing Key (ZSK).C. Modify the Key Signing Key (KSK).D. Change the Key Master.

Correct Answer: ASection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 3Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server2012. Server1 has the IP Address Management (IPAM) Server feature installed. Server2 has the DHCP Server server role installed.

A user named User1 is a member of the IPAM Users group on Server1.

You need to ensure that User1 can use IPAM to modify the DHCP scopes on Server2. The solution must minimize the number of permissions assigned to User1.

To which group should you add User1?

A. DHCP Administrators on Server2B. IPAM ASM Administrators on Server1C. IPAMUG in Active DirectoryD. IPAM MSM Administrators on Server1



QUESTION 4You have a server named DC2 that runs Windows Server 2012. DC2 contains a DNS zone named adatum.com.

The adatum.com zone is shown in the exhibit. (Click the Exhibit button.)

You need to configure DNS clients to perform DNSSEC validation for the adatum.com DNS domain.

What should you configure?

A. The Network Location settingsB. A Name Resolution PolicyC. The DNS Client settingsD. The Network Connection settings

Correct Answer: BSection: (none)Explanation

Explanation/Reference:

Explanation:http://technet.microsoft.com/en-us/library/hh831411.aspx#config_client1

QUESTION 5Your network contains two Active Directory forests named contoso.com and adatum.com. All of the domain controllers in both of the forests run Windows Server2012. The adatum.com domain contains a file server named Servers.


Adatum.com has a one-way forest trust to contoso.com.

A contoso.com user name User10 attempts to access a shared folder on Servers and receives the error message shown in the exhibit. (Click the Exhibit button.)

You verify that the Authenticated Users group has Read permissions to the Data folder.

You need to ensure that User10 can read the contents of the Data folder on Server5 in the adatum.com domain.

What should you do?

A. Grant the Other Organization group Read permissions to the Data folder.B. Modify the list of logon workstations of the contoso\User10 user account.

C. Enable the Netlogon Service (NP-In) firewall rule on Server5.D. Modify the permissions on the Server5 computer object in Active Directory.

Correct Answer: DSection: (none)Explanation

Explanation/Reference:Explanation:To resolve the issue, I had to open up AD Users and Computers --> enable Advanced Features -- > Select the Computer Object --> Properties --> Security --> Addthe Group I want to allow access to the computer (in this case, DomainA\Domain users) and allow "Allowed to Authenticate". Once I did that, everything worked:

QUESTION 6Your network contains an Active Directory domain named contoso.com. The domain contains a main office and a branch office. An Active Directory site exists foreach office.

All domain controllers run Windows Server 2012. The domain contains two domain controllers.

The domain controllers are configured as shown in the following table.

DC1 hosts an Active Directory-integrated zone for contoso.com.

You add the DNS Server server role to DC2.

You discover that the contoso.com DNS zone fails to replicate to DC2.

You verify that the domain, schema, and configuration naming contexts replicate from DC1 to DC2.You need to ensure that DC2 replicates the contoso.com zone by using Active Directory replication.

Which tool should you use?

A. Active Directory Sites and ServicesB. NtdsutilC. DNS ManagerD. Active Directory Domains and Trusts



QUESTION 7Your network contains an Active Directory forest. The forest contains two domains named contoso.com and fabrikam.com. The functional level of the forest isWindows Server 2003.

The contoso.com domain contains domain controllers that run either Windows Server 2008 or Windows Server 2008 R2. The functional level of the domain isWindows Server 2008.

The fabrikam.com domain contains domain controllers that run either Windows Server 2003 or Windows Server 2008. The functional level of the domain isWindows Server 2003.

The contoso.com domain contains a member server named Server1 that runs Windows Server 2012.

You install the Active Directory Domain Services server role on Server1.

You need to add Server1 as a new domain controller in the contoso.com domain.

What should you do?

A. Run the Active Directory Domain Services Configuration Wizard.B. Run adprep.exe /domainprep, and then run dcpromo.exe.C. Raise the functional level of the forest, and then run dcprorno.exe.D. Modify the Computer Name/Domain Changes properties.



Explanation:Windows Server 2012 requires a Windows Server 2003 forest functional level. That is, before you can add a domain controller that runs Windows Server 2012 toan existing Active Directory forest, the forest functional level must be Windows Server 2003 or higher.

QUESTION 8Your network contains an Active Directory domain named adatum.com. The domain contains two domain controllers that run Windows Server 2012. The domaincontrollers are configured as shown in the following table.

You log on to DC1 by using a user account that is a member of the Domain Admins group, and then you create a new user account named User1.

You need to prepopulate the password for User1 on DC2.

What should you do first?


A. Connect to DC2 from Active Directory Users and Computers.B. Add DC2 to the Allowed RODC Password Replication Policy group.C. Add the User1 account to the Allowed RODC Password Replication Policy group.D. Run Active Directory Users and Computers as a member of the Enterprise Admins group.


Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/cc730883(v=ws.10).aspx

QUESTION 9Your company has offices in Montreal, New York, and Amsterdam.

The network contains an Active Directory forest named contoso.com. An Active Directory site exists for each office. All of the sites connect to each other by usingthe DEFAULTIPSITELINK site link.

You need to ensure that only between 20:00 and 08:00, the domain controllers in the Montreal office replicate the Active Directory changes to the domain controllersin the Amsterdam office.

The solution must ensure that the domain controllers in the Montreal and the New York offices can replicate the Active Directory changes any time of day.

What should you do?

A. Create a new site link that contains Montreal and Amsterdam. Remove Amsterdam from DEFAULTIPSITELINK. Modify the schedule of DEFAULTIPSITELINK.B. Create a new site link that contains Montreal and Amsterdam. Create a new site link bridge.

Modify the schedule of DEFAU LTIPSITELINK.C. Create a new site link that contains Montreal and Amsterdam. Remove Amsterdam from DEFAULTIPSITELINK. Modify the schedule of the new site link.D. Create a new site link that contains Montreal and Amsterdam. Create a new site link bridge.

Modify the schedule of the new site link.



QUESTION 10You have a server named Server1 that has the Active Directory Certificate Services server role installed.

Server1 uses a hardware security module (HSM) to protect the private key of Server1.

You need to ensure that the Active Directory Certificate Services (AD CS) database, log files, and private key are backed up.

You perform regular backups of the HSM module by using a backup utility provided by the HSM manufacturer.

What else should you do?

A. Run the certutil.exe command and specify the -backupkey parameter.B. Run the certutil.exe command and specify the -backupdb parameter.C. Run the certutil.exe command and specify the -backup parameter.D. Run the certutil.exe command and specify the -dump parameter.


Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/cc732443(v=ws.10).aspx#BKMK_backupDB

QUESTION 11Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012.

The domain contains a domain controller named DC1 that is configured as an enterprise root certification authority (CA).

All users in the domain are issued a smart card and are required to log on to their domain-joined client computer by using their smart card.

A user named User1 resigned and started to work for a competing company.

You need to prevent User1 immediately from logging on to any computer in the domain. The solution must not prevent other users from logging on to the domain.Which tool should you use?

A. Active Directory Sites and ServicesB. Active Directory Administrative CenterC. Server ManagerD. Certificate Templates



QUESTION 12Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V server role installed. Server1 hosts 10 virtual machinesthat run Windows Server 2012.

You add a new server named Server2. Server2 has faster hard disk drives, more RAM, and a different processor manufacturer than Server1.

You need to move all of the virtual machines from Server1 to Server2. The solution must minimize downtime.

What should you do for each virtual machine?

A. Perform a quick migration.

B. Perform a storage migration.C. Export the virtual machines from Server1 and import the virtual machines to Server2.D. Perform a live migration.


Explanation/Reference:Explanation:The different processor manufacturer is the key here. Storage, Live, and Quick all require same manufacturer.

QUESTION 13Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers runWindows Server 2012.

Server1 and Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.


You add two additional nodes to Cluster1.

You need to ensure that Cluster1 stops running if three nodes fail.


A. Affinity-NoneB. Affinity-SingleC. The cluster quorum settingsD. The failover settingsE. A file server for general useF. The Handling priorityG. The host priorityH. Live migration

I. The possible ownerJ. The preferred ownerK. Quick migrationL. the Scale-Out File Server





You add two additional nodes to Cluster1.

You have a folder named Folder1 on Server1 that contains application data.

You plan to provide continuously available access to Folder1.

You need to ensure that all of the nodes in Cluster1 can actively respond to the client requests for Folder1.


A. Affinity-NoneB. Affinity-SingleC. The cluster quorum settingsD. The failover settingsE. A file server for general useF. The Handling priorityG. The host priorityH. Live migrationI. The possible ownerJ. The preferred owner

K. Quick migrationL. the Scale-Out File Server

Correct Answer: LSection: (none)Explanation

Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/hh831349.aspx

Scale-Out File Server for application data (Scale-Out File Server) This clustered file server is introduced in Windows Server 2012 and lets you store serverapplication data, such as Hyper-V virtual machine files, on file shares, and obtain a similar level of reliability, availability, manageability, and high performance thatyou would expect from a storage area network. All file shares are online on all nodes simultaneously. File shares associated with this type of clustered file serverare called scale-out file shares. This is sometimes referred to as active-active.

QUESTION 15Information and details provided in a question apply only to that question.

Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers runWindows Server 2012.

Server1 and Server2 have the Network Load Balancing (NLB) feature installed. The servers are configured as nodes in an NLB cluster named Cluster1.

Cluster1 hosts a secure web application named WebApp1. WebApp1 saves user state information locally on each node.

You need to ensure that when users connect to WebApp1, their session state is maintained.


A. Affinity-NoneB. Affinity-SingleC. The cluster quorum settingsD. The failover settingsE. A file server for general useF. The Handling priorityG. The host priorityH. Live migrationI. The possible owner

J. The preferred ownerK. Quick migrationL. the Scale-Out File Server


Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/bb687542.aspx

QUESTION 16You manage an environment that has many servers. The servers run Windows Server 2012 and use iSCSI storage.

Administrators report that it is difficult to locate available iSCSI resources on the network.

You need to ensure that the administrators can locate iSCSI resources on the network by using a central repository.

Which feature should you deploy?

A. The iSCSI Target Server role serviceB. The iSNS Server service featureC. The Windows Standards-Based Storage Management featureD. The iSCSI Target Storage Provider feature

Correct Answer: BSection: (none)

Explanation

Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/cc772568.aspx

QUESTION 17Your network contains an Active Directory domain named contoso.com. The network contains a file server named Server1 that runs Windows Server 2012.

You create a folder named Folder1. You share Folder1 as Share1. The NTFS permissions on Folder1 are shown in the Folder1 exhibit. (Click the Exhibit button.)

The Everyone group has the Full control Share permission to Folder1.

You configure a central access policy as shown in the Central Access Policy exhibit. (Click the Exhibit button.)

Members of the IT group report that they cannot modify the files in Folder1. You need to ensure that the IT group members can modify the files in Folder1. Thesolution must use central access policies to control the permissions.

Which two actions should you perform? (Each correct answer presents part of the solution.Choose two.)

A. On the Classification tab of Folder1, set the classification to Information Technology.B. On the Security tab of Folder1, add a conditional expression to the existing permission entry for the IT group.C. On Share1, assign the Change Share permission to the IT group.D. On the Security tab of Folder1, remove the permission entry for the IT group.E. On the Security tab of Folder1, assign the Modify permission to the Authenticated Users group.

Correct Answer: ABSection: (none)Explanation


QUESTION 18You have a file server named Server1 that runs a Server Core Installation of Windows Server 2012.

You need to ensure that users can access previous versions of files that are shared on Server1 by using the Previous Versions tab.


A. DiskpartB. WbadminC. VssadminD. Storrept



QUESTION 19You have a server named Server1 that runs Windows Server 2012. Server1 has the Windows Deployment Services server role installed.

You back up Server1 each day by using Windows Server Backup.

The disk array on Server1 fails.

You replace the disk array.

You need to restore Server1 as quickly as possible.

What should you do?

A. Start Server1 from the Windows Server 2012 installation media.B. Start Server1and press F8.C. Start Server1 and press Shift+F8.D. Start Server1 by using the PXE.



Explanation:http://www.windowsnetworking.com/articles_tutorials/Restoring-Windows-Server-Bare-Metal.html

QUESTION 20Your network contains two servers named Server1 and Server2 that run Windows Server 2012.

Both servers have the Hyper-V server role installed. Server1 and Server2 are located in different offices. The offices connect to each other by using a high-latencyWAN link.

Server2 hosts a virtual machine named VM1.

You need to ensure that you can start VM1 on Server1 if Server2 fails. The solution must minimize hardware costs.

What should you do?

A. On Server1, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1.B. From the Hyper-V Settings of Server2, modify the Replication Configuration settings. Enable replication for VM1.C. On Server2, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1.D. From the Hyper-V Settings of Server1, modify the Replication Configuration settings. Enable replication for VM1.


Explanation/Reference:Explanation:You first have to enable replication on the Replica server--Server1--by going to the server and modifying the "Replication Configuration" settings under Hyper-Vsettings. You then go to VM1-- which presides on Server2-- and run the "Enable Replication" wizard on VM1.

QUESTION 21You have a DNS server named Server1 that runs Windows Server 2012. Server1 has a signed zone for contoso.com.

You need to configure DNS clients to perform DNSSEC validation for the contoso.com DNS domain.


A. The Network Connection settingsB. A Name Resolution PolicyC. The Network Location settingsD. The DNS Client settings



QUESTION 22Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012.

On Dc1, you open DNS Manager as shown in the exhibit. (Click the Exhibit button.)

You need to change the replication scope of the contoso.com zone.

What should you do before you change the replication scope?

A. Modify the Zone Transfers settings.B. Add DC1 to the Name Servers list.C. Add your user account to the Security settings of the zone.D. Unsign the zone.



QUESTION 23

Your network contains an Active Directory domain named contoso.com. The domain contains servers named Server1 and Server2 that run Windows Server 2012.Server1 has the IP Address Management (IPAM) Server feature installed.

You install the IPAM client on Server2.

You open Server Manager on Server2 as shown in the exhibit. (Click the Exhibit button.)

You need to manage IPAM from Server2.


A. On Server1, add the Server2 computer account to the IPAM MSM Administrators group.B. On Server2, open Computer Management and connect to Server1.C. On Server2, add Server1 to Server Manager.D. On Server1, add the Server2 computer account to the IPAM ASM Administrators group.



QUESTION 24Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Dc1. DC1 has the DNS Server server roleinstalled.

The network has two sites named Site1 and Site2. Site1 uses 10.10.0.0/16 IP addresses and Site2 uses 10.11.0.0/16 IP addresses. All computers use DC1 as theirDNS server.

The domain contains four servers named Server1, Server2, Server3, and Server4. All of the servers run a service named Service1.

DNS host records are configured as shown in the exhibit. (Click the Exhibit button.)

You discover that computers from the 10.10.1.0/24 network always resolve Service1 to the IP address of Server1.

You need to configure DNS on DC1 to distribute computers in Site1 between Server1 and Server2 when the computers attempt to resolve Service1.

What should run on DC1?

A. dnscmd /config /bindsecondaries 1B. dnscmd /config /localnetpriority 0C. dnscmd /config /localnetprioritynetmask 0x0000ffffD. dnscmd /config /roundrobin 0



QUESTION 25Your network contains servers that run Windows Server 2012. The network contains a large number of iSCSI storage locations and iSCSI clients.

You need to deploy a central repository that can discover and list iSCSI resources on the network automatically.

Which feature should you deploy?

A. the Windows Standards-Based Storage Management featureB. the iSCSI Target Server role serviceC. the iSCSI Target Storage Provider featureD. the iSNS Server service feature



QUESTION 26You have a file server named FS1 that runs Windows Server 8.

Data Deduplication is enabled on FS1.

You need to configure Data Deduplication to run at a normal priority from 20:00 to 06:00 daily.


A. File and Storage Services in Server ManagerB. The Data Deduplication process in Task ManagerC. Disk Management in Computer ManagementD. The properties of drive C



QUESTION 27Your network contains an Active Directory domain named contoso.com.

A previous administrator implemented a Proof of Concept installation of Active Directory Rights Management Services (AD RMS).

After the proof of concept was complete, the Active Directory Rights Management Services server role was removed.

You attempt to deploy AD RMS.

During the configuration of AD RMS, you receive an error message indicating that an existing AD RMS Service Connection Point (SCP) was found.

You need to remove the existing AD RMS SCP.

A. Certification AuthorityB. Authorization ManagerC. ADSI EditD. Active Directory Domains and Trusts



Explanation:http://social.technet.microsoft.com/wiki/contents/articles/710.the-ad-rms-service-connection-point- en-us.aspx

QUESTION 28Your network contains an Active Directory forest named adatum.com. The forest contains a single domain. The domain contains four servers. The servers areconfigured as shown in the following table.

You need to update the schema to support a domain controller that will run Windows Server 2012.

On which server should you run adprep.exe?

A. Server1B. DC3C. DC2D. DC1



QUESTION 29Your network contains an Active Directory domain named contoso.com. The domain contains domain controllers that run either Windows Server 2003, WindowsServer 2008 R2, or Windows Server 2012.

You plan to implement a new Active Directory forest. The new forest will be used for testing and will be isolated from the production network.

In the test network, you deploy a server named Server1 that runs Windows Server 2012.

You need to configure Server1 as a new domain controller in a new forest named contoso.test.The solution must meet the following.

Select two options below.

A. There is no need to set the Forest Functional Level.B. Set Forest Functional Level to Windows 2003.C. Set Forest Functional Level to Windows 2008D. Set Forest Functional Level to Windows 2008 R2.E. Set Forest Functional Level to Windows 2012.F. There is no need to set the Domain Functional Level.G. Set Domain Functional Level to Windows 2003.H. Set Domain Functional Level to Windows 2008I. Set Domain Functional Level to Windows 2008 R2.

J. Set Domain Functional Level to Windows 2012.

Correct Answer: BGSection: (none)Explanation

Explanation/Reference:Explanation:* When you deploy AD DS, set the domain and forest functional levels to the highest value that your environment can support. This way, you can use as many ADDS features as possible. For example, if you are sure that you will never add domain controllers that run Windows Server 2003 to the domain or forest, select theWindows Server 2008 functional level during the deployment process. However, if you might retain or add domain controllers that run Windows Server 2003, selectthe Windows Server 2003 functional level. When you deploy a new forest, you are prompted to set the forest functional level and then set the domain functionallevel. You cannot set the domain functional level to a value that is lower than the forest functional level.

Reference: Understanding Active Directory Domain Services (AD DS) Functional Levels

QUESTION 30Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Both servers have theHyper-V server role installed.


You plan to replicate virtual machines between Server1 and Server2. The replication will be encrypted by using Secure Sockets Layer (SSL).

You need to request a certificate on Server1 to ensure that the virtual machine replication is encrypted.

Which two intended purposes should the certificate for Server1 contain? (Each correct answer presents part of the solution. Choose two.)

A. Client AuthenticationB. Kernel Mode Code SigningC. Server AuthenticationD. IP Security end systemE. KDC Authentication

Correct Answer: AC

Section: (none)Explanation

Explanation/Reference:Explanation:http://blogs.technet.com/b/virtualization/archive/2012/03/13/hyper-v-replica-certificate- requirements.aspx

QUESTION 31Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2 that run WindowsServer 2012. Both servers have the Hyper-V server role installed.

The network contains an enterprise certification authority (CA). All servers are enrolled automatically for a certificate-based on the Computer certificate template.

On Server1, you have a virtual machine named VM1. VM1 is replicated to Server2.

You need to encrypt the replication of VM1.


A. On Server1, modify the settings of VM1.B. On Server2, modify the settings of VM1.C. On Server2, modify the Hyper-V Settings.D. On Server1, modify the Hyper-V Settings.E. On Server1, modify the settings of the virtual switch to which VM1 is connected.F. On Server2, modify the settings of the virtual switch to which VM1 is connected.

Correct Answer: ACSection: (none)Explanation

Explanation/Reference:Explanation:Once you change the Hyper-V Settings of Server 2 to encrypt replications with a certificate, you then need to change the replication information of VM1 to use thesecure connection.



You add two additional nodes in Cluster1.

You have a folder named Folder1 on Server1 that hosts application data. Folder1 is a folder target in a Distributed File System (DFS) namespace.

You need to provide highly available access to Folder1. The solution must support DFS Replication to Folder1.


A. Affinity-NoneB. Affinity-SingleC. The cluster quorum settingsD. The failover settingsE. A file server for general useF. The Handling priorityG. The host priorityH. Live migrationI. The possible ownerJ. The preferred ownerK. Quick migrationL. The Scale-Out File Server

Correct Answer: ESection: (none)

Explanation



Server1 and Server2 have the Network Load Balancing (NLB) feature installed. The servers are configured as nodes in an NLB cluster named Cluster1.

Port rules are configured for all clustered applications.

You need to ensure that Server2 handles all client requests to the cluster that are NOT covered by a port rule.


A. Affinity-None

B. Affinity-SingleC. The cluster quorum settingsD. The failover settingsE. A file server for general useF. The Handling priorityG. The host priorityH. Live migrationI. The possible ownerJ. The preferred ownerK. Quick migrationL. The Scale-Out File Server

Correct Answer: GSection: (none)Explanation


QUESTION 34Your network contains an Active Directory domain named contoso.com. A previous administrator implemented a Proof of Concept installation of Active DirectoryRights Management Services (AD RMS). After the proof of concept was complete, the Active Directory Rights Management Services server role was removed.

You attempt to deploy AD RMS. During the configuration of AD RMS, you receive an error message indicating that an existing AD RMS Service Connection Point(SCP) was found.

You need to remove the existing AD RMS SCP.


A. ADSI EditB. Active Directory Users and ComputersC. Active Directory Domains and TrustsD. Active Directory Sites and ServicesE. ServicesF. Authorization ManagerG. TPM Management

H. Certification Authority

Correct Answer: ADSection: (none)Explanation


QUESTION 35Your network contains an Active Directory domain named contoso.com. The domain contains a main office and a branch office. An Active Directory site exists foreach office. All domain controllers run Windows Server 2012.

The domain contains two domain controllers.

DC1 hosts an Active Directory-integrated zone for contoso.com.

You add the DNS Server server role to DC2.

You discover that the contoso.com DNS zone fails to replicate to DC2.

You verify that the domain, schema, and configuration naming contexts replicate from DC1 to DC2.

You need to ensure that DC2 replicates the contoso.com zone by using Active Directory replication.


A. DnscmdB. DnslintC. RepadminD. NtdsutilE. DNS ManagerF. Active Directory Sites and ServicesG. Active Directory Domains and TrustsH. Active Directory Users and Computers

Correct Answer: ESection: (none)Explanation


QUESTION 36Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012. The domain contains a domain controller namedDC1 that is configured as an enterprise root certification authority (CA).


A user named User1 resigned and started to work for a competing company. You need to prevent User1 immediately from logging on to any computer in thedomain.

The solution must not prevent other users from logging on to the domain.


A. Active Directory Administrative CenterB. Active Directory Sites and ServicesC. Active Directory Users and ComputersD. the Certification Authority consoleE. the Certificates snap-inF. Certificate TemplatesG. Server ManagerH. the Security Configuration Wizard



QUESTION 37Your network contains an Active Directory domain named contoso.com. Domain controllers run either Windows Server 2008, Windows Server 2008 R2, orWindows Server 2012. You have a Password Settings object (PSOs) named PSO1. You need to view the settings of PSO1. Which tool should you use?

A. Get-ADDomainControllerPasswordReplicationPolicyB. Get-ADDefaultDomainPasswordPolicyC. Server Manager

D. Get-ADFineGrainedPasswordPolicy


Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/ee617231.aspx

QUESTION 38Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 Both servers have the IPAddress Management (IPAM) Server feature installed.

You have a support technician named Tech1. Tech1 is a member of the IPAM Administrators group on Server1 and Server2.

You need to ensure that Tech1 can use Server Manager on Server1 to manage IPAM on Server2.

To which group on Server2 should you add Tech1?

A. IPAM MSM AdministratorsB. IPAM AdministratorsC. winRMRemoteWMIUsers_D. Remote Management Users


Explanation/Reference:Explanation:This is another case of Remote Management Users and winRMRemoteWMIUsers_ providing the exact same permissions. The description of each group is exactlythe same. However since the user is already a member of IPAM administrators group and the IPAM MSM Administrators group provides access that is alreadyavailable to the IPAM Administrators group.

QUESTION 39You have a server named Server1 that runs Windows Server 2012.

Windows Server 2012 is installed on volume C.

You need to ensure that Safe Mode with Command Prompt loads the next time Server1 restarts.


A. The Restart-Server cmdletB. The Bootcfg commandC. The Restart-Computer cmdletD. The Bcdedit command



QUESTION 40Your network contains two Web servers named Server1 and Server2.

Server1 and Server2 are nodes in a Network Load Balancing (NLB) cluster.

You configure the nodes to use the port rule shown in the exhibit. (Click the Exhibit button.)

You need to configure the NLB cluster to meet the following requirements:

- HTTPS connections must be directed to Server1 if Server1 is available.- HTTP connections must be load balanced between the two nodes.

Which three actions should you perform? (Each correct answer presents part of the solution.Choose three.)

A. From the host properties of Server1, set the Handling priority of the existing port rule to 2.B. From the host properties of Server1, set the Handling priority of the existing port rule to 1.C. From the host properties of Server2, set the Priority (Unique host ID) value to 1.D. Create a port rule for TCP port 80. Set the Filtering mode to Multiple host and set the Affinity to None.E. From the host properties of Server2, set the Handling priority of the existing port rule to 2.F. Create an additional port rule for TCP port 443. Set the Filtering mode to Multiple host and set the Affinity to Single.

Correct Answer: BDESection: (none)Explanation

Explanation/Reference:Explanation: Handling priority: When Single host filtering mode is being used, this parameter specifies the local host's priority for handling the networking traffic forthe associated port rule. The host with the highest handling priority (lowest numerical value) for this rule among the current members of the cluster will handle all ofthe traffic for this rule. The allowed values range from 1, the highest priority, to the maximum number of hosts allowed (32). This value must be unique for all hostsin the cluster.E (not C): Lower priority (2) for Server 2.D: HTTP is port 80.Multiple hosts. This parameter specifies that multiple hosts in the cluster handle network traffic for the associated port rule. This filtering mode provides scaledperformance in addition to fault tolerance by distributing the network load among multiple hosts. You can specify that the load be equally distributed among thehosts or that each host handle a specified load weight.Reference: Network Load Balancing parameters

QUESTION 41Your network contains two Active Directory forests named contoso.com and litwareinc.com. A two- way forest trusts exists between the forest. Selectiveauthentication is enabled on the trust.

The contoso.com forest contains a server named Server1.

You need to ensure that users in litwareinc.com can access resources on Server1.

What should you do?

A. Install Active Directory Rights Management Services on a domain controller in contoso.com.B. Modify the permission on the Server1 computer account.C. Install Active Directory Rights Management Services on a domain controller in litwareinc.com.D. Configure SID filtering on the trust.

Correct Answer: B



QUESTION 42Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1 and a domain controller named DC1. Allservers run Windows Server 2012.A Group Policy object (GPO) named GPO1 is linked to the domain.

Server1 contains a folder named Folder1. Folder1 is shared as Share1.

You need to ensure that authenticated users can request assistance when they are denied access to the resources on Server1.


A. Assign the Read Attributes NTFS permission on Folder1 to the Authenticated Users group.B. Install the File Server Resource Manager role service on Server1.C. Configure the Customize message for Access Denied errors policy setting of GPO1.D. Enable the Enable access-denied assistance on client for all file types policy setting for GPO1.E. Install the File Server Resource Manager role service on DC1.

Correct Answer: BDSection: (none)Explanation

Explanation/Reference:Explanation: C: The access-denied assistance message should be customized for your organization. The included message is only a sample.D: You can configure access-denied assistance within a domain by using Group Policy, or you can configure the assistance individually on each file server by usingthe File Server Resource Manager console. You can also change the access-denied message for a specific shared folder on a file server.

Reference: Deploy Access-Denied Assistance

QUESTION 43Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2008 R2.

The domain contains a file server named Server6 that runs Windows Server 2012. Server6 contains a folder named Folder1. Folder1 is shared as Share1.

The NTFS permissions on Folder1 are shown in the exhibit. (Click the Exhibit button.)

The domain contains two global groups named Group1 and Group2.

You need to ensure that only users who are members of both Group1 and Group2 are denied access to Folder1.


A. Remove the Deny permission for Group1 from Folder1.B. Deny Group2 permission to Folder1.C. Install a domain controller that runs Windows Server 2012.D. Create a conditional expression.E. Deny Group2 permission to Share1.F. Deny Group1 permission to Share1.

Correct Answer: CDSection: (none)Explanation

Explanation/Reference:Explanation: * Conditional Expressions for Permission Entries Windows Server 2008 R2 and Windows 7 enhanced Windows security descriptors by introducing aconditional access permission entry. Windows Server 2012 takes advantage of conditional access permission entries by inserting user claims, device claims, andresource properties, into conditional expressions. Windows Server 2012 security evaluates these expressions and allows or denies access based on results of theevaluation. Securing access to resources through claims is known as claims-based access control. Claims-based access control works with traditional accesscontrol to provide an additional layer of authorization that is flexible to the varying needs of the enterprise environment.


Server1 has a single volume that is encrypted by using BitLocker Drive Encryption (BitLocker).

BitLocker is configured to save encryption keys to a Trusted Platform Module (TPM). Server1 is configured to perform a daily system image backup.The motherboard on Server1 is upgraded.

After the upgrade, Windows Server 2012 on Server1 fails to start.

You need to start the operating system on Server1 as soon as possible.

What should you do?

A. Start Server1 from the installation media. Run startrec.exe.B. Move the disk to a server that has a model of the old motherboard. Start the server from the installation media. Run bcdboot.exe.C. Move the disk to a server that has a model of the old motherboard. Start the server. Run tpm.msc.

D. Start Server1 from the installation media. Perform a system image recovery.



QUESTION 45You have 3 server named LON-DC1 that runs Windows Server 2012.

An iSCSI virtual disk named VirtualiSCSIl.vhd exists on LON-DC1 as shown in the exhibit. (Click the Exhibit button.)

You create a new iSCSI virtual disk named VirtualiSCSI2.vhd by using the existing itgt iSCSI target.VirtualiSCSIl.vhd is removed from LON-DC1.

You need to assign VirtualiSCSI2.vhd a logical unit value of 0.

What should you do?

A. Modify the properties of the VirtualiSCSI2.vhd iSCSI virtual disk.B. Run the Add-IscsiVirtualDiskTargetMapping cmdlet and specify the -Lun parameter.C. Run the iscsicli command and specify the reportluns parameter.D. Run the iscsicpl command and specify the virtualdisklun parameter.



QUESTION 46Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The forest contains three Active Directory sites namedSiteA, SiteB, and SiteC. The sites contain four domain controllers. The domain controllers are configured as shown in the following table.

An IP site link exits between each site.

You discover that the users in SiteC are authenticated by the domain controllers in SiteA and SiteB.

You need to ensure that the SiteC users are authenticated by the domain controllers in SiteB, unless all of the domain controllers in SiteB are unavailable.

What should you do?

A. Create a site link bridge.B. Create additional connection objects for DC3 and DC4.C. Create additional connection objects for DC1 and DC2.D. Increase the cost of the site link between SiteA and SiteC.



QUESTION 47You have a server named File1 that runs Windows Server 2012. File1 has the File Server role service installed.

You plan to back up all shared folders by using Windows Azure Online Backup.

You download and install the Windows Azure Online Backup Service Agent on File1.

You need to ensure that you use Windows Server Backup to back up data to Windows Azure Online Backup.

What should you do?

A. From Computer Management, add the File1 computer account to the Backup Operators group.B. From the Services console, modify the Log On settings of the Windows Azure Online Backup Service Agent.C. From Windows Server Backup, run the Register Server Wizard.D. From a command prompt, run wbadmin.exe enable backup.




Windows Server 2012 is installed on volume C.

You need to ensure that Safe Mode with Networking loads the next time Server1 restarts.


A. The Msconfig commandB. The Restart-Server cmdletC. The Restart-Computer cmdletD. The Bootcfg command



QUESTION 49Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012.DC1 has the DNS Server server role installed.

The network contains client computers that run either Linux, Windows 7, or Windows 8.

You have a standard primary zone named adatum.com as shown in the exhibit. (Click the Exhibit button.)

You plan to configure Name Protection on all of the DHCP servers.

You need to configure the adatum.com zone to support Name Protection.

Which two configurations should you perform from DNS Manager? (Each correct answer presents part of the solution. Choose two.)

A. Sign the zone.B. Store the zone in Active Directory.C. Modify the Security settings of the zone.D. Configure Dynamic updates.

Correct Answer: BDSection: (none)Explanation

Explanation/Reference:Explanation:/ IssueName protection has been enabled on some IPv4 scopes, but secure DNS updates has not been enabled./ ImpactName protection requires secure update to work. Without name protection DNS names may be hijacked./ ResolutionUsing the DNS MMC, configure an Active Directory-integrated DNS zone for the domain and enable secure (only) dynamic updatesNote:* Name protection is based on the Dynamic Host Configuration Identifier (DHCID) in the Dynamic Host Configuration Protocol (DHCP) server.DHCID prevents the following name squatting situations:Server name squatting by a clientServer name squatting by another serverClient name squatting by another clientClient name squatting by a server* Name squatting occurs when a non-Windows-based computer registers in Domain Name System (DNS) with a name that is already registered to a Windows-based computer. The use of name protection in Windows Server prevents name squatting by non-Windows-based computers. Name squatting does not present aproblem on a homogeneous Windows network where Active Directory Domain Services (AD DS) can be used to reserve a name for a single user or computer.* (B) Convert primary DNS server to Active Directory integrated primary On the current DNS server, start DNS Manager.Right-click a DNS zone, click Properties, click the General tab, and then note the Type value. This will be Primary zone, Secondary zone or Stub zone.Click Change.In the Change Zone Type box, click to select the Store the zone in Active Directory (available only if DNS server is a domain controller) check box. When you areprompted to answer whether want this zone to become Active Directory integrated, click Yes, and then click OK. In the Domain properties, the type now shows"Active Directory-Integrated".* (C) Enable secure dynamic updatesOpen the DNS snap-in.In the console tree, right-click the applicable zone, and then click Properties. On the General tab, verify that the zone Type is Active Directory-Integrated.In Dynamic updates, click Secure only.

Reference: DHCP: Secure DNS updates should be configured if Name Protection is enabled on any IPv4 scope

QUESTION 50You have a failover cluster named Cluster1 that contains four nodes. All of the nodes run Windows Server 2012.

You need to force every node in Cluster1 to contact immediately the Windows Server Update Services (WSUS) server on your network for updates.


A. The Add-CauClusterRole cmdletB. The Wuauclt commandC. The Wusa commandD. The Invoke-CauScan cmdlet


Explanation/Reference:Explanation:http://technet.microsoft.com/library/hh847223.aspx

QUESTION 51Your network contains an Active Directory domain named contoso.com. The network contains a file server named Server1 that runs Windows Server 2012.

You are configuring a central access policy for temporary employees.

You enable the Department resource property and assign the property a suggested value of Temp.

You need to configure a target resource condition for the central access rule that is scoped to resources assigned to Temp only.

Which condition should you use?

A. (Temp.Resource Equals "Department")B. (Resource.Temp Equals "Department")C. (Resource.Department Equals "Temp")D. (Department.Value Equals "Temp")



Explanation:

QUESTION 52Your network contains an Active Directory domain named contoso.com. The domain contains two sites named Site1 and Site2 and two domain controllers namedDC1 and DC2. Both domain controllers are located in Site1.

You install an additional domain controller named DC3 in Site1 and you ship DC3 to Site2.


A technician connects DC3 to Site2.

You discover that users in Site2 are authenticated by all three domain controllers. You need to ensure that the users in Site2 are authenticated by DC1 or DC2 onlyif DC3 is unavailable.

What should you do?

A. From Network Connections, modify the IP address of DC3.B. In Active Directory Sites and Services, modify the Query Policy of DC3.C. From Active Directory Sites and Services, move DC3.D. In Active Directory Users and Computers, configure the insDS-PrimaryComputer attribute for the users in Site2.



QUESTION 53Your network contains two Active Directory forests named contoso.com and adatum.com.

Contoso.com contains one domain. Adatum.com contains a child domain named child.adatum.com.

Contoso.com has a one-way forest trust to adatum.com. Selective authentication is enabled on the forest trust.

Several user accounts are migrated from child.adatum.com to adatum.com.

Users report that after the migration, they fail to access resources in contoso.com. The users successfully accessed the resources in contoso.com before theaccounts were migrated.

You need to ensure that the migrated users can access the resources in contoso.com.

What should you do?

A. Replace the existing forest trust with an external trust.B. Run netdom and specify the /quarantine attribute.C. Disable SID filtering on the existing forest trust.D. Disable selective authentication on the existing forest trust.



QUESTION 54Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 and has theDHCP Server server role installed.

You need to create an IPv6 scope on Server1. The scope must use an address space that is reserved for private networks. The addresses must be routable.

Which IPV6 scope prefix should you use?

A. FF00::B. 2001::C. FD00:123:4567::D. FE80::



Explanation: Prefixes in the fd00::/8 range have similar properties as those of the IPv4 private address ranges:* They are not allocated by an address registry and may be used in networks by anyone without outside involvement.* They are not guaranteed to be globally unique.* Reverse Domain Name System (DNS) entries (under ip6.arpa) for fd00::/8 ULAs cannot be delegated in the global DNS.

As fd00::/8 ULAs are not meant to be routed outside their administrative domain (site or organization), administrators of interconnecting networks normally do notneed to worry about the uniqueness of ULA prefixes.

QUESTION 55Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains three domain controllers. Thedomain controllers are configured as shown in the following table.

You discover that when you run Group Policy Results from Group Policy Management, the settings from site-linked Group Policy objects (GPOs) fail to appear inthe results.

You need to ensure that the settings from site-linked GPOs appear in the results.


A. Run adprep on DC3 by using Windows Server 2012 installation media.B. Transfer the infrastructure master role to DC3.C. Upgrade DC2 to Windows Server 2012.D. Run adprep on DC1 by using Windows Server 2003 installation media.


Explanation/Reference:Explanation: In this scenario a Windows 2012 server has been added to a Windows 2003 network.

Note:

* Before adding your new Windows 2012 Domain Controller, or attempting to perform an in-place upgrade of an existing Windows 2008 or 2008 R2 DC, you mustmake sure that the Schema is upgraded to support your new Windows 2012 DC, and that you prepare each domain where you plan to install Windows 2012 DCs.To do this we can use the ADPREP.exe tool found in the support\adprep folder on your installation media.* Starting with Windows 2012 there is only one version of ADPREP available, and that is a 64-bit version.* Adprep is the utility--included in the OS installation media--that performs several crucial functions to upgrade AD to support that OS. The utility has three majoroptions: /forestprep, /domainprep, and /rodcprep. The /forestprep option runs first, extending the AD schema with new object and attribute classes that the new ADversion needs. The /domainprep option creates new well-known objects in AD, applies security changes, and miscellaneous other bits. Finally, /rodcprep makesforest-wide security changes to allow read-only domain controller (RODC) functionality. The Windows Server 2012 version of adprep.exe can run on any server thatruns a 64-bit version of Windows Server 2008 or later.

Reference: How to add a Windows Server 2012 domain controller to an existing Windows 2008 domain

Topic 3, Volume C

QUESTION 56Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 and has theDNS Server server role installed.

Server1 is configured to use a DNS server from an Internet Service Provider (ISP) as a forwarder.

Corporate management requires that client computers only resolve names of contoso.com computers.You need to configure Server1 to resolve names in the contoso.com zone only.

What should you do on Server1?

A. From DNS Manager, modify the root hints of Server1.B. From Windows PowerShell, run the Remove-DnsServerForwarder cmdlet.C. From Windows PowerShell, run the Set-NetDnsTransitionConfiguration cmdlet.D. From DNS Manager, modify the Advanced properties of Server1.


Explanation/Reference:Explanation: If the DNS server does not know the address of the requested site, then it will forward the request to another DNS server. In order to do so, the DNSserver must know of the IP address of another DNS server that it can forward the request to. This is the job of root hints. Root hints provides a list of IP addressesof DNS servers that are considered to be authoritative at the root level of the DNS hierarchy(also known as root name server).

QUESTION 57Your company has a main office and a remote office. The remote office is used for disaster recovery.

The network contains an Active Directory domain named contoso.com. The domain contains member servers named Server1, Server2, Server3, and Server4. Allservers run Windows Server 2012.

Server1 and Server2 are located in the main office. Server3 and Server4 are located in the remote office.

All servers have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1. Storage is replicated betweenthe main office and the remote site.

You need to ensure that Cluster1 is available if two nodes in the same office fail.

What are two possible quorum configurations that achieve the goal? (Each correct answer presents a complete solution. Choose two.)

A. Node MajorityB. No Majority: Disk OnlyC. Node and File Share MajorityD. Node and Disk Majority

Correct Answer: ABSection: (none)Explanation

Explanation/Reference:Explanation: Depending on the quorum configuration option that you choose and your specific settings, the cluster will be configured in one of the following quorummodes:* (A) Node majority (no witness)Only nodes have votes. No quorum witness is configured. The cluster quorum is the majority of voting nodes in the active cluster membership.* (B) No majority (disk witness only)No nodes have votes. Only a disk witness has a vote. The cluster quorum is determined by the state of the disk witness.The cluster has quorum if one node is available and communicating with a specific disk in the cluster storage. Generally, this mode is not recommended, and itshould not be selected because it creates a single point of failure for the cluster.* Node majority with witness (disk or file share)Nodes have votes. In addition, a quorum witness has a vote. The cluster quorum is the majority of voting nodes in the active cluster membership plus a witnessvote. A quorum witness can be a designated disk witness or a designated file share witness.

Note:

* Quorum in Windows 2008 R2 referred to a consensus , that is, a majority of votes is required in order to reach quorum and maintain stability of the cluster. A newoption created in Windows Server 2012 which was also back ported to Windows Server 2008 R2 SP1 was the ability to stop a node being able to participate in thevoting process.* Dynamic quorum is the ability of the cluster to recalculate quorum on the fly and still maintain a working cluster. This is a huge improvement as we are now able to

continue to run a cluster even if the number of nodes remaining in the cluster is less than 50%. This was not possible before but the dynamic quorum concept nowallows us to do this. In fact we can reduce the cluster down to the last node (known as last man standing) and still maintain quorum.

Reference: Configure and Manage the Quorum in a Windows Server 2012 Failover Cluster

QUESTION 58Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1. The File Server Resource Manager roleservice is installed on Server1.All servers run Windows Server 2012.

A Group Policy object (GPO) named GPO1 is linked to the organizational unit (OU) that contains Server1. The following graphic shows the configured settings inGPO1.

Server1 contains a folder named Folder1. Folder1 is shared as Share1.

You attempt to configure access-denied assistance on Server1, but the Enable access-denied assistance option cannot be selected from File Server ResourceManager.

You need to ensure that you can configure access-denied assistance on Server1 manually by using File Server Resource Manager.

Which two actions should you perform?

A. Set the Enable access-denied assistance on client for all file types policy setting to Disabled for GPO1.B. Set the Customize message for Access Denied errors policy setting to Not Configured for GPO1.C. Set the Enable access-denied assistance on client for all file types policy setting to Enabled for GPO1.

D. Set the Customize message for Access Denied errors policy setting to Enabled for GPO1.



QUESTION 59Your network contains an Active Directory forest named contoso.com. The forest contains two domains named contoso.com and childl.contoso.com. The domainscontain three domain controllers.

The domain controllers are configured as shown in the following table.

You need to ensure that the KDC support for claims, compound authentication, and kerberos armoring setting is enforced in the child1.contoso.com domain.


A. Upgrade DC1 to Windows Server 2012.B. Upgrade DC11 to Windows Server 2012.C. Raise the domain functional level ofchildl.contoso.com,D. Raise the domain functional level of contoso.com.E. Raise the forest functional level of contoso.com.

Correct Answer: BD



QUESTION 60Your network contains two servers named Server1 and Server2 that run Windows Server 2012. Server1 and Server2 have the Hyper-V server role installed.Server1 and Server2 are configured as Hyper-V replicas of each other.

Server2 hosts a virtual machine named VM5. VM5 is replicated to Server1. You need to verify whether the replica of VM5 on Server1 is functional. The solutionmust ensure that VM5 remains accessible to clients.

What should you do from Hyper-V Manager?

A. On Server1, execute a Planned Failover.B. On Server1, execute a Test Failover.C. On Server2, execute a Planned Failover.D. On Server2, execute a Test Failover.



QUESTION 61You have a file server named Server1 that runs a Server Core Installation of Windows Server 2012.

Server1 has a volume named D that contains user data. Server1 has a volume named E that is empty.

Server1 is configured to create a shadow copy of volume D every hour.

You need to configure the shadow copies of volume D to be stored on volume E.

What should you run?

A. The Set-Volume cmdlet with the -driveletter parameterB. The Set-Volume cmdlet with the -path parameter

C. The vssadmin.exe add shadowstorage commandD. The vssadmin.exe create shadow command



QUESTION 62Your network contains an Active Directory forest named contoso.com. All servers run Windows Server 2012.

The domain contains four servers. The servers are configured as shown in the following table.

You need to deploy IP Address Management (IPAM) to manage DNS and DHCP.

On which server should you install IPAM?

A. DC1B. DC2C. DC3D. Server1

Correct Answer: DSection: (none)

Explanation


QUESTION 63You have a server named Server1 that runs Windows Server 2012. Server1 is located in the perimeter network and has the DNS Server server role installed.

Server1 has a zone named contoso.com.

You apply a security template to Server1.

After you apply the template, users report that they can no longer resolve names from contoso.com.

On Server1, you open DNS Manager as shown in the DNS exhibit. (Click the Exhibit button.)

On Server1, you open Windows Firewall with Advanced Security as shown in the Firewall exhibit.(Click the Exhibit button.)

You need to ensure that users can resolve contoso.com names.

What should you do?

A. From Windows Firewall with Advanced Security, disable the DNS (TCP, Incoming) rule and the DNS (UDP, Incoming) rule.B. From DNS Manager, modify the Zone Transfers settings of the contoso.com zone.C. From DNS Manager, unsign the contoso.com zone.D. From DNS Manager, modify the Start of Authority (SOA) of the contoso.com zone.E. From Windows Firewall with Advanced Security, modify the profiles of the DNS (TCP, Incoming) rule and the DNS (UDP, Incoming) rule.

Correct Answer: ESection: (none)Explanation


Explanation:


You need to create an IPv6 scope on Server1. The scope must use an address space that is reserved for private networks. The addresses must be routable.

Which IPV6 scope prefix should you use?

A. FF00::B. FE80:123:4567::C. FD00:123:4567::D. FF00:123:4567:890A::



QUESTION 65You have 20 servers that run Windows Server 2012.

You need to create a Windows PowerShell script that registers each server in Windows Azure Online Backup and sets an encryption passphrase.Which two PowerShell cmdlets should you run in the script? (Each correct answer presents part of the solution. Choose two.)

A. New-OBPolicyB. New-OBRetentionPolicyC. Add-OBFileSpecD. Start-OBRegistrationE. Set OBMachineSetting

Correct Answer: DESection: (none)Explanation


Explanation: D: Start-OBRegistrationRegisters the current computer with Windows Azure Online Backup using the credentials (username and password) created during enrollment.E: The Set-OBMachineSetting cmdlet sets a OBMachineSetting object for the server that includes proxy server settings for accessing the internet, networkbandwidth throttling settings, and the encryption passphrase that is required to decrypt the files during recovery to another server.Incorrect:Not C: The Add-OBFileSpec cmdlet adds the OBFileSpec object, which specifies the items to include or exclude from a backup, to the backup policy (OBPolicyobject). The OBFileSpec object can include or exclude multiple files, folders, or volumes. T

QUESTION 66You have 30 servers that run Windows Server 2012.

All of the servers are backed up daily by using Windows Azure Online Backup.

You need to perform an immediate backup of all the servers to Windows Azure Online Backup.

Which Windows PowerShell cmdlets should you run on each server?

A. Get-OBPolicy | StartOBBackupB. Start-OBRegistration | StartOBBackupC. Get-WBPolicy | Start-WBBackupD. Get-WBBackupTarget | Start-WBBackup



QUESTION 67Your network contains an Active Directory domain named contoso.com. AH servers run Windows Server 2012.



A user named User1 resigned and started to work for a competing company. You need to prevent User1 immediately from logging on to any computer in thedomain. The solution must not prevent other users from logging on to the domain.


A. The Security Configuration WizardB. The Certificates snap-inC. Server ManagerD. Active Directory Users and Computers


Explanation/Reference:Explanation: You can use the Certificates snap-in to manage certificates for a user, computer, or service account.

QUESTION 68Your network contains an Active Directory domain named contoso.com. The domain contains a file server named File1 that runs a Server Core Installation ofWindows Server 2012.

File1 has a volume named D that contains home folders. File1 creates a shadow copy of volume D twice a day.

You discover that volume D is almost full.

You add a new volume named H to File1.

You need to ensure that the shadow copies of volume D are stored on volume H.

Which command should you run?

A. The Set-Volume cmdlet with the -driveletter parameterB. The vssadmin.exe create shadow commandC. The Set-Volume cmdlet with the -path parameterD. The vssadmin.exe add shadowstorage command



QUESTION 69Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 and has the

DNS Server server role installed.

Server1 is configured to use a DNS server from an Internet Service Provider (ISP) as a forwarder.

Corporate management requires that client computers only resolve names of contoso.com computers.

You need to configure Server1 to resolve names in the contoso.com zone only.

What should you do on Server1?

A. From DNS Manager, create a forward lookup zone named RootHints.B. From DNS Manager, modify the root hints of Server1.C. From Windows PowerShell, run the Set-DnsServerRecursion cmdlet.D. From Windows PowerShell, run the Remove-DnsServerRootHint cmdlet.


Explanation/Reference:Explanation:If the DNS server does not know the address of the requested site, then it will forward the request to another DNS server. In order to do so, the DNS server mustknow of the IP address of another DNS server that it can forward the request to. This is the job of root hints. Root hints provides a list of IP addresses of DNSservers that are considered to be authoritative at the root level of the DNS hierarchy(also known as root name server).


Server1 has a scope named Scope1. A policy named Policy1 is configured for Scope1. Policy1 is configured to provide Hyper-V virtual machines a one-day lease.All other computers receive an eight-day lease.

You implement an additional DHCP server named Server2 that runs Windows Server 2012.

On Server1, you configure Scope1 for DHCP failover.

You discover that virtual machines that receive IP addresses from Server2 have a lease duration of eight days.

You need to ensure that when Server2 assigns IP addresses to the Hyper-V virtual machines, the lease duration is one day. The solution must ensure that othercomputers that receive IP addresses from Server2 have a lease duration of eight days.

What should you do?

A. On Server2, create a new DHCP policy.B. on Server1, right-click Scope1, and then click Replicate Scope.C. On Server1, delete Policy1, and then recreate the policy.D. On Server2. right-click Scope1, and then click Reconcile.


Explanation/Reference:Explanation:Scope 1 has been set up for DHCP failover. Now we need to replicate it from Server1 to Server2.

QUESTION 71Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012.

You need to ensure that a WIM file that is located on a network share is used as the installation source when installing server roles and features on Server1.


A. Run the dism.exe command and specify the /remove-package parameter.B. Run the Remove-WindowsFeature cmdlet.C. Enable and configure the Specify settings for optional component installation and component repair policy setting by using a Group Policy object (GPO).D. Enable the Enforce upgrade component rules policy setting by using a Group Policy object (GPO).E. Run the Remove-WindowsPackage cmdlet.


Explanation/Reference:Explanation: A: To remove packages from an offline image by using DISM Example:At a command prompt, specify the package identity to remove it from the image. You can remove multiple packages on one command line.DISM /Image:C:\test\offline /Remove-Package/PackageName:Microsoft.Windows.Calc.Demo~6595b6144ccf1df~x86~en~1.0.0.0 /PackageName:Microsoft-Windows-MediaPlayer-Package~31bf3856ad364e35~x86~~6.1.6801.0

C: * You can use Group Policy to specify a Windows image repair source to use within your network. The repair source can be used to restore Windows features orto repair a corrupted Windows image.

* Set Group PolicyYou can use Group Policy to specify when to use Windows Update, or a network location as a repair source for features on demand and automatic corruptionrepair.To configure Group Policy for Feature on DemandNote:* The Windows Imaging Format (WIM) is a file-based disk image format. It was developed by Microsoft to help deploy Windows Vista and subsequent versions ofWindows operating system family, as well as Windows Fundamentals for Legacy PCs.

QUESTION 72Your network contains an Active Directory forest. The forest contains two domains named contoso.com and fabrikam.com. The functional level of the forest isWindows Server 2003.

You have a domain outside the forest named litwareinc.com.

You need to configure an access solution to meet the following requirements:

- Users in litwareinc.com must be able to access resources on a server named Server1 in contoso.com.- Users in the contoso.com forest must be prevented from accessing any resources in litwareinc.com.- Users in litwareinc.com must be prevented from accessing any other resources in the contoso.com forest.

Which three actions should you perform? (Each correct answer presents part of the solution.Choose three.)

A. Configure SID filtering on the trust.B. Configure forest-wide authentication on the trust.C. Create a one-way forest trust.D. Create a one-way external trustE. Modify the permission on the Server1 object.F. Configure selective authentication on the trust.

Correct Answer: DEFSection: (none)Explanation

Explanation/Reference:Explanation: D (not C): litwareinc.com is outside the forest so we need an external trust (not a forest trust).E: Must grant the required permissions on Server1.F(not B): For external trust we must either select Domain-Wide or Selective Authentication (forst- wide authentication is not an option)

BCENote:* You can create an external trust to form a one-way or two-way, nontransitive trust with domains that are outside your forest. External trusts are sometimesnecessary when users need access to resources in a Windows NT 4.0 domain or in a domain that is located in a separate forest that is not joined by a forest trust./ To select the scope of authentication for users that are authenticating through a forest trust, click the forest trust that you want to administer, and then clickProperties . On the Authentication tab, click either Forest-wide authentication or Selective authentication . / To select the scope of authentication for users that areauthenticating through an external trust, click the external trust that you want to administer, and then click Properties . On the Authentication tab, click eitherDomain-wide authentication or Selective authentication .* The forest-wide authentication setting permits unrestricted access by any users in the trusted forest to all available shared resources in any of the domains in thetrusting forest.* Forest-wide authentication is generally recommended for users within the same organization.

Reference: Select the Scope of Authentication for Users

QUESTION 73You have a server named Server1 that runs Windows Server 2012. Server1 has the File Server Resource Manager role service installed.

You are creating a file management task as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that the Include all folders that store the following kinds of data list displays an entry named Corporate Data.

What should you do?

A. Modify the properties of the System Files file group.B. Create a new classification property.C. Create a new file group.D. Modify the Folder Usage classification property.



QUESTION 74Your network contains an Active Directory forest named adatum.com. The forest contains an Active Directory Rights Management Services (AD RMS) cluster.

A partner company has an Active Directory forest named litwareinc.com. The partner company does not have AD RMS deployed.

You need to ensure that users in litwareinc.com can consume rights-protected content from adatum.com.

Which type of trust policy should you create?

A. At federated trustB. A trusted user domainC. A trusted publishing domainD. Windows Live ID



QUESTION 75Your network contains an Active Directory forest named adatum.com. All servers run Windows Server 2012. The domain contains four servers. The servers areconfigured as shown in the following table.

You need to deploy IP Address Management (IPAM) to manage DNS and DHCP.

On which server should you install IPAM?

A. Server1B. Server2C. Server3D. Server4



QUESTION 76Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012. The domain contains two domaincontrollers. The domain controllers are configured as shown in the following table.

You configure a user named User1 as a delegated administrator of DC10.

You need to ensure that User1 can log on to DC10 if the network link between the Main site and the Branch site fails.

What should you do?

A. Add User1 to the Domain Admins group.B. Modify the properties of the DC10 computer account.C. Run repadmin and specify /replsingleobject parameter.D. On DC10, modify the User Rights Assignment in Local Policies.E. On DC10, run ntdsutil and configure the settings in the Local Roles context.


Explanation/Reference:Explanation: Modify the following policy:Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\Allow log on locallyNote:* User Rights Assignment policies determines which users or groups have logon rights or privileges on the computer.

* Delegated administrator accounts gain local administrative permissions to the RODC. These users can operate with privileges equivalent to the local computer'sAdministrators group. They are not members of the Domain Admins or the domain built-in Administrators groups. This option is useful for delegating branch officeadministration without giving out domain administrative permissions. Configuring delegation of administration is not required.

QUESTION 77Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012.




A user named User1 resigned and started to work for a competing company.

You need to prevent User1 immediately from logging on to any computer in the domain. The solution must not prevent other users from logging on to the domain.


A. Active Directory Users and ComputersB. Server ManagerC. The Certificates snap-inD. The Certification Authority console


Explanation/Reference:Explanation: You can use the Certification Authority console to configure CAs. This includes the following tasks:

(D) Scheduling certificate revocation list publication.Installing the CA certificate when necessary.Configuring exit module settings.Configuring policy module settings.Modifying security permissions and delegate control of CAs. Enabling optional Netscape-compatible Web-based revocation checking.

Reference: Configure Certification Authorities

QUESTION 78Your network contains an Active Directory domain named contoso.com.

A previous administrator implemented a Proof of Concept installation of Active Directory Rights Management Services (AD RMS).

After the proof of concept was complete, the Active Directory Rights Management Services server role was removed.

You attempt to deploy AD RMS.

During the configuration of AD RMS, you receive an error message indicating that an existing AD RMS Service Connection Point (SCP) was found.

You need to remove the existing AD RMS SCP. Which tool should you use?

A. ADSI EditB. Certification AuthorityC. Active Directory Users and ComputersD. Services


Explanation/Reference:Explanation: Only one SCP can exist in your Active Directory forest. If you try to install AD RMS and an SCP already exists in your forest from a previous AD RMSinstallation that was not properly deprovisioned, the new SCP will not install properly. It must be removed before you can establish the new SCP. A SCP can beviewed using ADSI Edit or LDP. To view the SCP, connect to the configuration container in ADSI Edit and navigate the following nodes: CN=Configuration [servername], CN=Services, CN=RightsManagementServices, CN=SCP. You can remove an SCP by using the ADScpRegister.exe tool included in the RMSAdministration Toolkit, which you can download from the Microsoft Download Center.

Reference: The AD RMS Service Connection Point

QUESTION 79Your network contains two DNS servers named DN51 and DNS2 that run Windows Server 2012.

DNS1 has a primary zone named contoso.com. DNS2 has a secondary copy of the contoso.com zone.

You need to log the zone transfer packets sent between DNS1 and DNS2.


A. Monitoring from DNS ManagerB. Logging from Windows Firewall with Advanced SecurityC. A Data Collector Set (DCS) from Performance MonitorD. Debug logging from DNS Manager



QUESTION 80Your network contains an Active Directory forest. The forest contains one domain named contoso.com. The domain contains three domain controllers. The domaincontrollers are configured as shown in the following table.

DC1 has all of the operations master roles installed.

You transfer all of the operations master roles to DC2, and then you uninstall Active Directory from DC1.

You need to ensure that you can use Password Settings objects (PSOs) in the domain.

What should you do?

A. Change the domain functional level.B. Upgrade DC2.C. Run the dcgpofix.exe command.D. Transfer the schema master role.



QUESTION 81

You have a server named Server1 that runs Windows Server 2012.

When you install a custom application on Server1 and restart the server, you receive the following error message: "The Boot Configuration Data file is missing somerequired information.File: \Boot\BCD

Error code: 0x0000034."

You start Server1 by using Windows PE.

You need to ensure that you can start Windows Server 2012 on Server1.


A. BootsectB. BootimC. BootrecD. Bootcfg



QUESTION 82You perform a full installation of Windows Server 2012 on a virtual machine named Server1. You plan to use Server1 as a reference image.

You need to minimize the amount of storage space used by the Windows Server 2012 installation.

Which cmdlet should you use?

A. Remove-ModuleB. Optimize-VHDC. Optimize-VolumeD. Uninstall-WindowsFeature

Correct Answer: BSection: (none)

Explanation

Explanation/Reference:Explanation: The Optimize-VHD cmdlet optimizes the allocation of space in or more virtual hard disk files, except for fixed virtual hard disks. The Compact operationis used to optimize the files. This operation reclaims unused blocks as well as rearranges the blocks to be more efficiently packed, which reduces the size of avirtual hard disk file.

Reference: Optimize-VHD


You configure a user named User1 as a delegated administrator of DC10.

You need to ensure that User1 can log on to DC10 if the network link between the Main site and the Branch site fails.

What should you do?

A. On DC10, run ntdsutil and configure the settings in the Roles context.B. On DC10, run ntdsutil and configure the settings in the Local Roles context.C. Modify the properties of the DCIO computer account.D. Run repadmin and specify /replsingleobject parameter.


Explanation/Reference:Explanation: Modify the following policy:Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\Allow log on locally

Note:

* User Rights Assignment policies determines which users or groups have logon rights or privileges on the computer.

* Delegated administrator accounts gain local administrative permissions to the RODC. These users can operate with privileges equivalent to the local computer'sAdministrators group. They are not members of the Domain Admins or the domain built-in Administrators groups. This option is useful for delegating branch officeadministration without giving out domain administrative permissions. Configuring delegation of administration is not required.

QUESTION 84Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012. The domain contains a file server named Server1.The domain contains a domain controller named DC1. Server1 contains three shared folders. The folders are configured as shown in the following table.

Folder2 has a conditional expression of User.Department= = MMarketing".

You discover that a user named User1 cannot access \\Server1\folder2. User1 can access \\Server1\folderl and \\Server1\folder3.

You verify the group membership of User1 as shown in the Member Of exhibit. (Click the Exhibit button.)

You verify the organization information of User1 as shown in the Organization exhibit. (Click the Exhibit button.)

You verify the general properties of User1 as shown in the General exhibit. (Click the Exhibit button.)

You need to ensure that User1 can access the contents of \\Server1\folder2.

What should you do?

A. From a Group Policy object (GPO), set the Support for Dynamic Access Control and Kerberos armoring setting to Always provide claims.B. Change the department attribute of User1.C. Grant the Full Control NTFS permissions on Folder2 to User1.D. Remove Userl1from the Accounting global group.




The Branch site contains a perimeter network.

For security reasons, client computers in the perimeter network can communicate with client computers in the Branch site only.

You plan to deploy a new RODC to the perimeter network in the Branch site.

You need to ensure that the new RODC will be able to replicate from DC10.

What should you do first on DC10?

A. Enable the Bridge all site links setting.B. Run the Active Directory Domain Services Configuration Wizard.C. Create an Active Directory site link bridge.D. Create an Active Directory site.



QUESTION 86Your network contains an Active Directory domain named contoso.com. The domain contains two Active Directory sites named Site1 and Site2.

You discover that when the account of a user in Site1 is locked out, the user can still log on to the servers in Site2 for up to 15 minutes by using Remote DesktopServices (RDS).

You need to reduce the amount of time it takes to synchronize account lockout information across the domain.

Which attribute should you modify?

To answer, select the appropriate attribute in the answer area.

Hot Area:

Correct Answer:



QUESTION 87Your company has a main office and a branch office. The main office is located in Detroit. The branch office is located in Seattle.

The network contains an Active Directory domain named adatum.com. Client computers run either Windows 7 Enterprise or Windows 8 Enterprise.

The main office contains 1,000 client computers and 50 servers. The branch office contains 20 client computers.

All computer accounts for the branch office are located in an organizational unit (OU) named SeattleComputers. A Group Policy object (GPO) named GPO1 islinked to the SeattleComputers OU.

You need to configure BranchCache for the branch office.

Hot Area:

Correct Answer:



QUESTION 88Your network contains an Active Directory domain named contoso.com. All file servers in the domain run Windows Server 2012.

The computer accounts of the file servers are in an organizational unit (OU) named OU1. A Group Policy object (GPO) named GPO1 is linked to OU1.

You plan to modify the NTFS permissions for many folders on the file servers by using central access policies.

You need to identify any users who will be denied access to resources that they can currently access once the new permissions are implemented.

In which order should you Perform the five actions?

Select and Place:

Correct Answer:


Explanation/Reference:http://technet.microsoft.com/en-us/library/hh846167.aspx

QUESTION 89Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1. All servers run Windows Server 2012.

All domain user accounts have the Division attribute automatically populated as part of the user provisioning process. The Support for Dynamic Access Control andKerberos armoring policy is enabled for the domain.

You need to control access to the file shares on Server1 based on the values in the Division attribute and the Division resource property.

Which three actions should you perform in sequence?

Select and Place:

Correct Answer:



QUESTION 90Your network contains an Active Directory domain named contoso.com. All client computers run Windows 8 Enterprise.

You have a remote site that only contains client computers. All of the client computer accounts are located in an organizational unit (CU) named Remote1. A GroupPolicy object (GPO) named GPO1 is linked to the Remote1 CU.

You need to configure BranchCache for the remote site.

Which two settings should you configure in GPO1?

To answer, select the two appropriate settings in the answer area.

Hot Area:

Correct Answer:



QUESTION 91Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Both servers have the IPAddress Management (IPAM) Server feature installed.

You have a support technician named Tech1. Tech1 is a member of the IPAM Administrators group on Server1 and Server2. You need to ensure that Tech1 canuse Server Manager on Server1 to manage IPAM on Server2.

To which group on Server2 should you add Tech1?

To answer, select the appropriate group in the answer area.

Hot Area:

Correct Answer:



QUESTION 92Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2 that run WindowsServer 2012.

You configure a new failover cluster named Cluster1. Server1 and Server2 are nodes in Cluster1.

You need to configure the disk that will be used as a witness disk for Cluster1.

How should you configure the witness disk?

To answer, drag the appropriate configurations to the correct location or locations. Each configuration may be used once, more than once, or not at all. You mayneed to drag the split bar between panes or scroll to view content.

Select and Place:

Correct Answer:



QUESTION 93Your network contains an Active Directory domain named adatum.com. All servers run Windows Server 2012. All domain controllers have the DNS Server serverrole installed.

You have a domain controller named DC1.

On DC1, you create an Active Directory-integrated zone named adatum.com and you sign the zone by using DNSSEC.

You deploy a new read-only domain controller (RODC) named R0DC1.

You need to ensure that the contoso.com zone replicates to RODC1.

What should you configure on DC1?

To answer, select the appropriate tab in the answer area.

Hot Area:

Correct Answer:



QUESTION 94You have a file server named Server1 that runs Windows Server 2012. The folders on Server1 are configured as shown in the following table.

A new corporate policy states that backups must use Windows Azure Online Backup whenever possible.

You need to identify which technology you must use to back up Server1. The solution must use Windows Azure Online Backup whenever possible.

What should you identify?

To answer, drag the appropriate backup type to the correct location or locations. Each backup type may be used once, more than once, or not at all. You may needto drag the split bar between panes or scroll to view content.

Select and Place:

Correct Answer:




Server1 and Server2 have the Network Load Balancing (NLB) feature installed. The servers are configured as nodes in an NLB cluster named Cluster1. Bothservers connect to the same switch.

Cluster1 hosts a secure web application named WebApp1. WebApp1 saves user state information in a central database.

You need to ensure that the connections to WebApp1 are distributed evenly between the nodes.The solution must minimize port flooding.


To answer, configure the appropriate affinity and the appropriate mode for Cluster1 in the answer area.

Hot Area:

Correct Answer:



QUESTION 96Your network contains an Active Directory domain named adatum.com. All servers run Windows Server 2012. All domain controllers have the DNS Server serverrole installed.

You have a domain controller named DC1.

On DC1, you create an Active Directory-integrated zone named adatum.com and you sign the zone by using DNSSEC.

You deploy a new read-only domain controller (RODC) named RODC1.

You need to ensure that the contoso.com zone replicates to RODC1.What should you configure on DC1?


Hot Area:

Correct Answer:



QUESTION 97Your company has a primary data center and a disaster recovery data center.

The network contains an Active Directory domain named contoso.com. The domain contains a server named that runs Windows Server 2012. Server1 is located inthe primary data center.

Server1 has an enterprise root certification authority (CA) for contoso.com.

You deploy another server named Server2 to the disaster recovery data center.

You plan to configure Server2 as a secondary certificate revocation list (CRL) distribution point.

You need to configure Server2 as a CRL distribution point (CDP).

Which tab should you use to configure the required CDP entry?


Hot Area:

Correct Answer:



QUESTION 98Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012. Server1has the Active Directory Federation Services server role installed.

You need to make configuration changes to the Windows Token-based Agent role service.Which tool should you use?

To answer, select the appropriate tool in the answer area.

Hot Area:

Correct Answer:




Server1 and Server2 have the Hyper-V server role and the Failover Clustering feature installed.

Server1 and Server2 are members of a cluster named Cluster1. Cluster1 hosts 10 virtual machines.

When you try to migrate a running virtual machine from one server to another, you receive the following error message: "There was an error checking for virtualmachine compatibility on the target node."

You need to ensure that the virtual machines can be migrated from one node to another.

From which node should you perform the configuration?

To answer, select the appropriate node in the answer area.

Hot Area:

Correct Answer:



QUESTION 100Your network contains an Active Directory domain named contoso.com. The domain contains domain controllers that run either Windows Server 2003, WindowsServer 2008 R2, or Windows Server 2012.

You plan to implement a new Active Directory forest. The new forest will be used for testing and will be isolated from the production network.

In the test network, you deploy a server named Server1 that runs Windows Server 2012.

You need to configure Server1 as a new domain controller in a new forest named contoso.test.

The solution must meet the following requirements:

- The functional level of the forest and of the domain must be the same as that of contoso.com.- Server1 must provide name resolution services for contoso.test.

What should you do?

To answer, configure the appropriate options in the answer area.

Hot Area:

Correct Answer:



QUESTION 101Your network contains an Active Directory domain named contoso.com. The domain contains aserver named Server1 that runs Windows Server 2012. Server1 has the Active DirectoryCertificate Services server role installed and configured.For all users, you are deploying smart cards for logon. You are using an enrollment agent to enrollthe smart card certificates for the users.You need to configure the Contoso Smartcard Logon certificate template to support the use of theenrollment agent.

Which setting should you modify?

To answer, select the appropriate setting in the answer area.

Hot Area:

Correct Answer:



QUESTION 102Your network contains two Active Directory forests named contoso.com and adatum.com. All domain controllers run Windows Server 2012.

A federated trust exists between adatum.com and contoso.com. The trust provides adatum.com users with access to contoso.com resources.

You need to configure Active Directory Federation Services (AD FS) claim rules for the federated trust. The solution must meet the following requirements:

- In contoso.com, replace an incoming claim type named Group with an outgoing claim type named Role.- In adatum.com, allow users to receive their tokens for the relying party by using their Active Directory group membership as the claim type.

The AD FS claim rules must use predefined templates.

Which rule types should you configure on each side of the federated trust?

To answer, drag the appropriate rule types to the correct location or locations. Each rule type may be used once, more than once, or not at all. You may need todrag the split bar between panes or scroll to view content.

Select and Place:

Correct Answer:



QUESTION 103Your network contains four servers that run Windows Server 2012.

Each server has the Failover Clustering feature installed. Each server has three network adapters installed. An iSCSI SAN is available on the network.

You create a failover cluster named Cluster1. You add the servers to the cluster.

You plan to configure the network settings of each server node as shown in the following table.

You need to configure the network settings for Cluster1.

What should you do?

To answer, drag the appropriate network communication setting to the correct cluster network. Each network communication setting may be used once, more thanonce, or not at all. You may need to drag the split bar between panes or scroll to view content.

Select and Place:

Correct Answer:



QUESTION 104Your network contains an Active Directory domain named contoso.com. The domain contains four member servers named Server1, Server2, Servers, and Server4.All servers run Windows Server 2012.

Server1 and Server2 are located in a site named Site1. Server3 and Server4 are located in a site named Site2. The servers are configured as nodes in a failovercluster named Cluster1.

Cluster1 is configured to use the Node Majority quorum configuration.

You need to ensure that Server1 is the only server in Site1 that can vote to maintain quorum.

What should you run from Windows PowerShell?To answer, drag the appropriate commands to the correct location. Each command may be used once, more than once, or not at all. You may need to drag the splitbar between panes or scroll to view content.

Select and Place:

Correct Answer:

microsoft actualanswers 70-412 exam questions & answers · microsoft actualanswers 70-412 exam...

Documents