minilinx-1000 - i.r.t. communications · 2019. 4. 9. · the minilinx-1000 conforms to smpte...
TRANSCRIPT
-
Due to our policy of continuing development, these specifications are subject to change without notice.
I.R.T. Communications Pty Ltd
MiniLinx-1000
FEATURES
• Portable – Desktop mount.
• Transports up to 8 independent 12G-SDI1, 6G-SDI1, 3G-SDI, HD-SDI, SD-SDI or ASI
signal rates plus a 10G or 1G Ethernet2
signal on a single fibre.
• Suitable for 4K/UHD video3.
• Path lengths up to 25 dB4 optical path loss using 9/125μm single mode fibre.
• MiniLinx-1000 available as either 8 Tx; 8 Rx; 6 Tx + 2 Rx; 6 Rx + 2 Tx; 4 Tx + 4 Rx;
4 Rx + 4 Tx; 6 Tx; 6 Rx; 4 Tx + 2 Rx; 4 Rx + T Rx;
4 Tx; 4 Rx; 2 Tx + 2 Rx; or 2 Rx + 2 Tx models.
• Two DC supply inputs for power supply redundancy.
• Web Browser monitoring and control.
GENERAL
The MiniLinx-1000 is a portable multi-
channel transmitter / receiver unit
designed principally for use as an up to
eight serial data + Ethernet2 fibre optic
transmission link on a single fibre for
12G-SDI1, 6G-SDI1, 3G-SDI, HD-SDI or
SD-SDI applications using 9/125 μm single
mode fibre.
In addition, the link may be used for ASI
transport streams for use with MPEG
compressed video streams, or other
270 Mb/s type data.
The Ethernet interface takes either a 10G
or 1G optical or electrical plug-in SFP+
module (sold separately).
The MiniLinx-1000 conforms to SMPTE
standards 2082-11, 2081-11, 424M, 292M
and 259M-C for digital video signals, as well
as the DVB standard for ASI; and IEEE
802.2ae and 802.3z standards for Ethernet
over fibre or IEEE 802.3an and 802.3ab
standards for Ethernet over CAT-6/5 cable.
Transmit and receive functions of the video
signals and Ethernet signals are combined
via an on board CWDM optical combiner
allowing combined bi-directional operation
on a single fibre.
Power is supplied by an external +12Vdc
power supply, with a secondary external
+12Vdc input port provided for power
supply redundancy.
The MiniLinx-1000 is designed to be
operated as a transmit/receive pair and is
orderable as either an 8-channel
transmitter only; an 8-channel receiver
only; a 6-channel transmitter + 2-channel
receiver; a 6-channel receiver + 2-channel
transmitter; a 4-channel transmitter +
4-channel receiver; a 4-channel receiver +
4-channel transmitter; a 6-channel
transmitter only; a 6-channel receiver only; a
4-channel transmitter + 2-channel receiver; a
4-channel receiver + 2-channel transmitter; a
4-channel transmitter only; a 4-channel
receiver only; a 2-channel transmitter +
2-channel receiver; or a 2-channel receiver +
2-channel transmitter. All models available
with or without the bi-directional Ethernet
port.
Monitoring is possible locally via the front
panel display or remotely via a web
browser.
Multi-Channel 12G/6G/3G/HD/SD/ASI + 10G/1G Ethernet Fibre Optic Link
+
NOTE: 1 12G-SDI and 6G-SDI only applicable to 12G versions of MiniLinx-1000.
2 Ethernet port only available on Ethernet versions of MiniLinx-1000. Ethernet SFP’s not included
- sold separately. 10G or 1G Ethernet SFP, type MSA, required for Ethernet operation.
3 Suitable for 4K/UHD as a 12G-SDI or 6G-SDI signal on 12G version of MiniLinx-1000 only;
4K/UHD as quad 3G-SDI signal suitable on both 12G and standard 3G versions of MiniLinx-1000.
4 Rated at 25dB optical path loss at 3G-SDI on 4-Channel, non-Ethernet versions of MiniLinx-1000
fitted with APD detectors, typically >28dB at HD and SD.
BLOCK DIAGRAM MiniLinx-1000 SIGNAL PATH
Fibre Link
MiniLinx-1000
(X-Tx/Y-Rx)†
IN 1
IN 2
IN X
Fibre I/O
OUT 1
OUT 2
OUT Y
Ethernet
MiniLinx-1000
(X-Rx/Y-Tx)†
OUT 1
OUT 2
OUT X
Fibre I/O
IN 1
IN 2
IN Y
Ethernet
NOTE: † X & Y = 8, 6, 4, 2 or 0 to represent various models of MiniLinx-1000.
See individual block diagrams of the models available.
Web Server Web Server
Ethernet
(10G/1G)
Ethernet
(10G/1G)
(2 - 8x)
12G-SDI
6G-SDI
3G-SDI
HD-SDI
SD-SDI
ASI
(2- 8x)
12G-SDI
6G-SDI
3G-SDI
HD-SDI
SD-SDI
ASI
-
Due to our policy of continuing development, these specifications are subject to change without notice.
I.R.T. Communications Pty Ltd
MiniLinx-1000 TECHNICAL SPECIFICATIONS (Preliminary)
Transmitter Mode:
Input serial data signal 11.88 Gb/s (12G-SDI) to SMPTE 2082-15;
5.94 Gb/s (6G-SDI) to SMPTE 2081-15;
2.97 Gb/s (3G-SDI) to SMPTE 424M;
1.485 Gb/s (HD-SDI) to SMPTE 292M;
270 Mb/s (SD-SDI) to SMPTE 259M-C and DVB-ASI.
Input impedance 75 Ω.
Input return loss > 15 dB 5 MHz to 1.5 GHz;
> 10 dB 1.5 GHz to 2.97 GHz.
Automatic cable compensation > 40m at 11.88 Gb/s (12G-SDI) with RG6/U5;
> 80m at 5.94 Gb/s (6G-SDI) with RG6/U5;
> 100 m at 2.97 Gb/s (3G-SDI) with Belden 1694A;
> 100 m at 1.485 Gb/s (HD-SDI) with Belden 1694A;
> 250 m at 270 Mb/s (SD-SDI/ASI) with Belden 8281.
Input Connector Up to 8 x BNC on rear panel, 1 per channel, dependent upon model chosen.
Receiver Mode:
Number of outputs 1 per channel, data reclocked, AC coupled.
Output level 800 mV ± 10%.
Output impedance 75 Ω.
Output return loss > 15 dB 5 MHz to 1.5 GHz;
> 10 dB 1.5 GHz to 2.97 GHz.
Output rise and fall time < 135 ps at 2.97 Gb/s and 1.485 Gb/s;
> 0.4 ns and < 1.5 ns at 270 Mb/s.
Intrinsic jitter < 0.3 UI at 2.97 Gb/s reclocked;
< 0.2 UI at 1.485 Gb/s reclocked;
< 0.1 UI at 270 Mb/s reclocked.
Output Connector Up to 8 x BNC on rear panel, 1 per channel, dependent upon model chosen.
Ethernet:6 (if fitted) If Ethernet port required, add ‘+E’ to end of desired model’s order code.
Type Standard IEEE 802.3ae & 802.3z (optical option); or IEEE 802.3an & 802.3ab (electrical option),
dependent on plug-in SFP+ used (sold separately).
Data Rate 10 Gb/s / 1 Gb/s, automatic.
Connector (dependent on SFP used) 2 x LC/PC optical; or RJ-45 electrical.
Optical:
Optical Output 0 dBm +5/-0 dB individual CWDM DFB lasers, optically combined.
Optical Input (3G PIN Standard) 0 to -16 dBm at 3G-SDI, typically < -18 dBm at HD/SD-SDI;
(3G APD Optional) -7 to -25 dBm at 3G-SDI, typically < -28 dBm at HD/SD-SDI;
(12G PIN Optional7) 0 to -12 dBm at 12G/6G-SDI, typically < -15 dBm at 3G-SDI & < -17 dBm at HD/SD-SDI.
Wavelengths 10 x CWDM DFB lasers – 1390nm, 1410nm, 1470nm to 1610nm, 20nm spacing.
Optical Path Loss8,9,10 0 to 14 dB at 3G-SDI, typically > 16 dB at HD/SD-SDI (3G PIN detectors);
5 to 23 dB at 3G-SDI, typically > 26 dB at HD/SD-SDI (3G APD detectors);
0 to 10 dB, typically > 13 dB at 3G-SDI & > 15 dB at HD/SD-SDI (12G PIN detectors7).
Optical Fibre Designed for use with 9/125 μm single mode fibre.
Optical Connector 1 x SC/PC (standard) on rear.
Power Requirements:
Voltage + 12 Vdc.
Power Consumption < 20 VA.
Other:
Temperature Range 0 - 50° C ambient.
Dimensions 160 x 30.5 x 165 mm.
NOTE: 5 12G-SDI and 6G-SDI only applicable to 12G versions of MiniLinx-1000.
6 Ethernet port only available on Ethernet versions of MiniLinx-1000. Ethernet SFP’s not included - sold separately.
10G or 1G Ethernet SFP, type MSA, required for Ethernet operation.
7 12G SFP lasers and detectors only applicable to 12G versions of MiniLinx-1000.
8 10dB Optical attenuator required for when optical path loss is less 7dB for 3G APD detector.
9 Add 1.5 dB to optical path loss for 4Tx+E, 4Rx+E, 2Tx+2Rx+E and 2Rx+2Tx+E models.
10 Add 0.5 dB to optical path loss for non-Ethernet versions.
-
Due to our policy of continuing development, these specifications are subject to change without notice.
I.R.T. Communications Pty Ltd
MiniLinx-1000 TECHNICAL SPECIFICATIONS (Continued)
Ordering:
3G versions without Ethernet port:
MiniLinx-1000/8Tx MiniLinx-1000 configured as a 3G 8-channel transmitter only.
MiniLinx-1000/8Rx MiniLinx-1000 configured as a 3G 8-channel receiver only.
MiniLinx-1000/6Tx+2Rx MiniLinx-1000 configured as a 3G 6-channel transmitter, 2-channel receiver.
MiniLinx-1000/6Rx+2Tx MiniLinx-1000 configured as a 3G 6-channel receiver, 2-channel transmitter.
MiniLinx-1000/4Tx+4Rx MiniLinx-1000 configured as a 3G 4-channel transmitter, 4-channel receiver.
MiniLinx-1000/4Rx+4Tx MiniLinx-1000 configured as a 3G 4-channel receiver, 4-channel transmitter.
MiniLinx-1000/6Tx MiniLinx-1000 configured as a 3G 6-channel transmitter only.
MiniLinx-1000/6Rx MiniLinx-1000 configured as a 3G 6-channel receiver only.
MiniLinx-1000/4Tx+2Rx MiniLinx-1000 configured as a 3G 4-channel transmitter, 2-channel receiver.
MiniLinx-1000/4Rx+2Tx MiniLinx-1000 configured as a 3G 4-channel receiver, 2-channel transmitter.
MiniLinx-1000/4Tx MiniLinx-1000 configured as a 3G 4-channel transmitter only.
MiniLinx-1000/4Rx MiniLinx-1000 configured as a 3G 4-channel receiver only.
MiniLinx-1000/2Tx+2Rx MiniLinx-1000 configured as a 3G 2-channel transmitter, 2-channel receiver.
MiniLinx-1000/2Rx+2Tx MiniLinx-1000 configured as a 3G 2-channel receiver, 2-channel transmitter.
3G versions with 1G Ethernet port:
MiniLinx-1000/8Tx+E MiniLinx-1000 configured as a 3G 8-channel transmitter only + 1G Ethernet port.
MiniLinx-1000/8Rx+E MiniLinx-1000 configured as a 3G 8-channel receiver only + 1G Ethernet port.
MiniLinx-1000/6Tx+2Rx+E MiniLinx-1000 configured as a 3G 6-channel transmitter, 2-channel receiver + 1G Ethernet port.
MiniLinx-1000/6Rx+2Tx+E MiniLinx-1000 configured as a 3G 6-channel receiver, 2-channel transmitter + 1G Ethernet port.
MiniLinx-1000/4Tx+4Rx+E MiniLinx-1000 configured as a 3G 4-channel transmitter, 4-channel receiver + 1G Ethernet port.
MiniLinx-1000/4Rx+4Tx+E MiniLinx-1000 configured as a 3G 4-channel receiver, 4-channel transmitter + 1G Ethernet port.
MiniLinx-1000/6Tx+E MiniLinx-1000 configured as a 3G 6-channel transmitter only + 1G Ethernet port.
MiniLinx-1000/6Rx+E MiniLinx-1000 configured as a 3G 6-channel receiver only + 1G Ethernet port.
MiniLinx-1000/4Tx+2Rx+E MiniLinx-1000 configured as a 3G 4-channel transmitter, 2-channel receiver + 1G Ethernet port.
MiniLinx-1000/4Rx+2Tx+E MiniLinx-1000 configured as a 3G 4-channel receiver, 2-channel transmitter + 1G Ethernet port.
MiniLinx-1000/4Tx+E MiniLinx-1000 configured as a 3G 4-channel transmitter only + 1G Ethernet port.
MiniLinx-1000/4Rx+E MiniLinx-1000 configured as a 3G 4-channel receiver only + 1G Ethernet port.
MiniLinx-1000/2Tx+2Rx+E MiniLinx-1000 configured as a 3G 2-channel transmitter, 2-channel receiver + 1G Ethernet port.
MiniLinx-1000/2Rx+2Tx+E MiniLinx-1000 configured as a 3G 2-channel receiver, 2-channel transmitter + 1G Ethernet port.
3G versions with 10G Ethernet port:
MiniLinx-1000/8Tx+10E MiniLinx-1000 configured as a 3G 8-channel transmitter only + 10G Ethernet port.
MiniLinx-1000/8Rx+10E MiniLinx-1000 configured as a 3G 8-channel receiver only + 10G Ethernet port.
MiniLinx-1000/6Tx+2Rx+10E MiniLinx-1000 configured as a 3G 6-channel transmitter, 2-channel receiver + 10G Ethernet port.
MiniLinx-1000/6Rx+2Tx+10E MiniLinx-1000 configured as a 3G 6-channel receiver, 2-channel transmitter + 10G Ethernet port.
MiniLinx-1000/4Tx+4Rx+10E MiniLinx-1000 configured as a 3G 4-channel transmitter, 4-channel receiver + 10G Ethernet port.
MiniLinx-1000/4Rx+4Tx+10E MiniLinx-1000 configured as a 3G 4-channel receiver, 4-channel transmitter + 10G Ethernet port.
MiniLinx-1000/6Tx+10E MiniLinx-1000 configured as a 3G 6-channel transmitter only + 10G Ethernet port.
MiniLinx-1000/6Rx+10E MiniLinx-1000 configured as a 3G 6-channel receiver only + 10G Ethernet port.
MiniLinx-1000/4Tx+2Rx+10E MiniLinx-1000 configured as a 3G 4-channel transmitter, 2-channel receiver + 10G Ethernet port.
MiniLinx-1000/4Rx+2Tx+10E MiniLinx-1000 configured as a 3G 4-channel receiver, 2-channel transmitter + 10G Ethernet port.
MiniLinx-1000/4Tx+10E MiniLinx-1000 configured as a 3G 4-channel transmitter only + 10G Ethernet port.
MiniLinx-1000/4Rx+10E MiniLinx-1000 configured as a 3G 4-channel receiver only + 10G Ethernet port.
MiniLinx-1000/2Tx+2Rx+10E MiniLinx-1000 configured as a 3G 2-channel transmitter, 2-channel receiver + 10G Ethernet port.
MiniLinx-1000/2Rx+2Tx+10E MiniLinx-1000 configured as a 3G 2-channel receiver, 2-channel transmitter + 10G Ethernet port.
-
Due to our policy of continuing development, these specifications are subject to change without notice.
I.R.T. Communications Pty Ltd
MiniLinx-1000 TECHNICAL SPECIFICATIONS (Continued)
Ordering: (Continued)
12G versions with 10G Ethernet port:
MiniLinx-1000/8Tx+10E/12G MiniLinx-1000 configured as a 12G 8-channel transmitter only + 10G Ethernet port.
MiniLinx-1000/8Rx+10E/12G MiniLinx-1000 configured as a 12G 8-channel receiver only + 10G Ethernet port.
MiniLinx-1000/6Tx+2Rx+10E/12G MiniLinx-1000 configured as a 12G 6-channel transmitter, 2-channel receiver + 10G Ethernet port.
MiniLinx-1000/6Rx+2Tx+10E/12G MiniLinx-1000 configured as a 12G 6-channel receiver, 2-channel transmitter + 10G Ethernet port.
MiniLinx-1000/4Tx+4Rx+10E/12G MiniLinx-1000 configured as a 12G 4-channel transmitter, 4-channel receiver + 10G Ethernet port.
MiniLinx-1000/4Rx+4Tx+10E/12G MiniLinx-1000 configured as a 12G 4-channel receiver, 4-channel transmitter + 10G Ethernet port.
MiniLinx-1000/6Tx+10E/12G MiniLinx-1000 configured as a 12G 6-channel transmitter only + 10G Ethernet port.
MiniLinx-1000/6Rx+10E/12G MiniLinx-1000 configured as a 12G 6-channel receiver only + 10G Ethernet port.
MiniLinx-1000/4Tx+2Rx+10E/12G MiniLinx-1000 configured as a 12G 4-channel transmitter, 2-channel receiver + 10G Ethernet port.
MiniLinx-1000/4Rx+2Tx+10E/12G MiniLinx-1000 configured as a 12G 4-channel receiver, 2-channel transmitter + 10G Ethernet port.
MiniLinx-1000/4Tx+10E/12G MiniLinx-1000 configured as a 12G 4-channel transmitter only + 10G Ethernet port.
MiniLinx-1000/4Rx+10E/12G MiniLinx-1000 configured as a 12G 4-channel receiver only + 10G Ethernet port.
MiniLinx-1000/2Tx+2Rx+10E/12G MiniLinx-1000 configured as a 12G 2-channel transmitter, 2-channel receiver + 10G Ethernet port.
MiniLinx-1000/2Rx+2Tx+10E/12G MiniLinx-1000 configured as a 12G 2-channel receiver, 2-channel transmitter + 10G Ethernet port.
Version variations:
APD detector version Add /APD to end of part number, e.g. MiniLinx-1000/8Tx/APD (not available in 12G version).
Optical Connector Standard optical connector is an SC/PC type. For other connector types, add to end of part
number /FC for FC/PC type; /LC for LC/PC type; or /ST for ST/PC type.
APC Fibre type Standard optic fibre type is SC/PC. For Angle Physical Connector type (APC), add /APC to end of
part number.
Example: MiniLinx-1000/4Tx+4Rx+10E/12G/APD/FC/APC is a 12G version with 4 transmitters and 4
receivers plus a 10G Ethernet port fitted with APD detectors and terminated in an FC/APC style
of connector.
Plug-in Ethernet SFPs:
SFP-1G-OPT-SM 1G Ethernet single-mode, MSA, generic optical transceiver SFP (LC/PC optical connectors);
SFP-1G-OPT-MM 1G Ethernet multi-mode, MSA, generic optical transceiver SFP (LC/PC optical connectors);
SFP-1G-RJ45 1G Ethernet Cat 5/6, MSA, generic electrical transceiver SFP (RJ45 connector).
SFP-10G-OPT-SM 10G Ethernet single-mode, MSA, generic optical transceiver SFP (LC/PC optical connectors);
SFP-10G-OPT-MM 10G Ethernet multi-mode, MSA, generic optical transceiver SFP (LC/PC optical connectors);
SFP-10G-RJ45 10G Ethernet Cat 5/6, MSA, generic electrical transceiver SFP (RJ45 connector).
Ethernet versions of the MiniLinx-1000 come with an Ethernet port suitable for third party MSA compliant 10G or 1G Ethernet SFP’s.
As there are a number of different manufacturers of Ethernet routers, and there is a large choice of Ethernet SFP transceivers available,
the MiniLinx-1000 does not come with an Ethernet SFP as standard. We can offer a limited choice of generic Ethernet SFP’s (sold
separately, as above), but if it is wished to match a specific brand of router then it is recommended that these be sourced from a third
party supplier.
-
Due to our policy of continuing development, these specifications are subject to change without notice.
I.R.T. Communications Pty Ltd
MiniLinx-1000 MiniLinx-1000/8Tx and MiniLinx-1000/8Rx
The MiniLinx-1000/8Tx and MiniLinx-1000/8Rx models are designed to operate together as a pair. They form an 8-channel
single direction fibre link.
Bi-directional 1G or 10G Ethernet option available with the addition of +E or +10E to the part number.
12G-SDI and 6G-SDI inputs and outputs applicable to 12G versions only, as designated by a /12G in the part number.
MiniLinx-1000 Front Panel:
MiniLinx-1000/8Tx+E Rear Panel: (Ethernet Option)
Inputs
MiniLinx-1000/8Rx Rear Panel: (Non-Ethernet Option)
Outputs
BLOCK DIAGRAM MiniLinx-1000/8Tx+E | MiniLinx-1000/8Rx+E SIGNAL PATH
Ethernet
(1G/10G)
Ethernet
(1G/10G)
(8 Tx)
12G-SDI
6G-SDI
3G-SDI
HD-SDI
SD-SDI
ASIFibre Link
0-14dB*
(typically >16dB at HD
and SD)
MiniLinx-1000
/8Tx+E
IN 1
IN 2
IN 8
Fibre O/P
Ethernet
MiniLinx-1000
/8Rx+E
OUT 1
OUT 2
OUT 8
Fibre I/P
Ethernet
(8 Rx)
12G-SDI
6G-SDI
3G-SDI
HD-SDI
SD-SDI
ASI
NOTE: * When fitted with 3G PIN detectors (standard).
5 to 23dB at 3G, typically >26dB at HD and SD, when fitted with
optional 3G APD detectors.
0 to 10dB at 12G when fitted with optional /12G components.
Web Server Web Server
-
Due to our policy of continuing development, these specifications are subject to change without notice.
I.R.T. Communications Pty Ltd
MiniLinx-1000 MiniLinx-1000/6Tx+2Rx and MiniLinx-1000/6Rx+2Tx
The MiniLinx-1000/6Tx+2Rx and MiniLinx-1000/6Rx+2Tx models are designed to operate together as a pair. They form a
6-channel forward, 2-channel reverse fibre link.
Bi-directional 1G or 10G Ethernet option available with the addition of +E or +10E to the part number.
12G-SDI and 6G-SDI inputs and outputs applicable to 12G versions only, as designated by a /12G in the part number.
MiniLinx-1000 Front Panel:
MiniLinx-1000/6Tx+2Rx+E Rear Panel: (Ethernet Option)
Inputs Outputs
MiniLinx-1000/6Rx+2Tx Rear Panel: (Non-Ethernet Option)
Outputs Inputs
BLOCK DIAGRAM MiniLinx-1000/6Tx+2Rx+E | MiniLinx-1000/6Rx+2Tx+E SIGNAL PATH
Ethernet
(1G/10G)
Ethernet
(1G/10G)
(6 Tx)
12G-SDI
6G-SDI
3G-SDI
HD-SDI
SD-SDI
ASI
(2 Rx)
Fibre Link
0-14dB*
(typically >16dB at HD
and SD)
MiniLinx-1000
/6Tx+2Rx+E
IN 1
IN 2
IN 6
Fibre I/O
OUT 1
OUT 2
Ethernet
MiniLinx-1000
/6Rx+2Tx+E
OUT 1
OUT 2
OUT 6
Fibre I/O
IN 1
IN 2
Ethernet
(6 Rx)
12G-SDI
6G-SDI
3G-SDI
HD-SDI
SD-SDI
ASI
(2 Tx)
NOTE: * When fitted with 3G PIN detectors (standard).
5 to 23dB at 3G, typically >26dB at HD and SD, when fitted with
optional 3G APD detectors.
0 to 10dB at 12G when fitted with optional /12G components.
Web Server Web Server
-
Due to our policy of continuing development, these specifications are subject to change without notice.
I.R.T. Communications Pty Ltd
MiniLinx-1000 MiniLinx-1000/4Tx+4Rx and MiniLinx-1000/4Rx+4Tx
The MiniLinx-1000/4Tx+4Rx and MiniLinx-1000/4Rx+4Tx models are designed to operate together as a pair. They form a
4-channel forward, 4-channel reverse fibre link.
Bi-directional 1G or 10G Ethernet option available with the addition of +E or +10E to the part number.
12G-SDI and 6G-SDI inputs and outputs applicable to 12G versions only, as designated by a /12G in the part number.
MiniLinx-1000 Front Panel:
MiniLinx-1000/4Tx+4Rx+E Rear Panel: (Ethernet Option)
Inputs Outputs
MiniLinx-1000/4Rx+4Tx Rear Panel: (Non-Ethernet Option)
Outputs inputs
BLOCK DIAGRAM MiniLinx-1000/4Tx+4Rx+E | MiniLinx-1000/4Rx+4Tx+E SIGNAL PATH
Ethernet
(1G/10G)
Ethernet
(1G/10G)
(4 Tx)
12G-SDI
6G-SDI
3G-SDI
HD-SDI
SD-SDI
ASI
(4 Rx)
Fibre Link
0-14dB*
(typically >16dB at HD
and SD)
MiniLinx-1000
/4Tx+4Rx+E
IN 1
IN 2
IN 3
IN 4
Fibre I/O
OUT 1
OUT 2
OUT 3
OUT 4
Ethernet
MiniLinx-1000
/4Rx+4Tx+E
OUT 1
OUT 2
OUT 3
OUT 4
Fibre I/O
IN 1
IN 2
IN 3
IN 4
Ethernet
(4 Rx)
12G-SDI
6G-SDI
3G-SDI
HD-SDI
SD-SDI
ASI
(4 Tx)
NOTE: * When fitted with 3G PIN detectors (standard).
5 to 23dB at 3G, typically >26dB at HD and SD, when fitted with
optional 3G APD detectors.
0 to 10dB at 12G when fitted with optional /12G components.
Web Server Web Server
-
Due to our policy of continuing development, these specifications are subject to change without notice.
I.R.T. Communications Pty Ltd
MiniLinx-1000 MiniLinx-1000/6Tx and MiniLinx-1000/6Rx
The MiniLinx-1000/6Tx and MiniLinx-1000/6Rx models are designed to operate together as a pair. They form a 6-channel single
direction fibre link.
Bi-directional 1G or 10G Ethernet option available with the addition of +E or +10E to the part number.
12G-SDI and 6G-SDI inputs and outputs applicable to 12G versions only, as designated by a /12G in the part number.
MiniLinx-1000 Front Panel:
MiniLinx-1000/6Tx+E Rear Panel: (Ethernet Option)
Inputs
MiniLinx-1000/6Rx Rear Panel: (Non-Ethernet Option)
Outputs
BLOCK DIAGRAM MiniLinx-1000/6Tx+E | MiniLinx-1000/6Rx+E SIGNAL PATH
Ethernet
(1G/10G)
Ethernet
(1G/10G)
(6 Tx)
12G-SDI
6G-SDI
3G-SDI
HD-SDI
SD-SDI
ASIFibre Link
0-14dB*
(typically >16dB at HD
and SD)
MiniLinx-1000
/6Tx+E
IN 1
IN 2
IN 6
Fibre O/P
Ethernet
MiniLinx-1000
/6Rx+E
OUT 1
OUT 2
OUT 6
Fibre I/P
Ethernet
(6 Rx)
12G-SDI
6G-SDI
3G-SDI
HD-SDI
SD-SDI
ASI
NOTE: * When fitted with 3G PIN detectors (standard).
5 to 23dB at 3G, typically >26dB at HD and SD, when fitted with
optional 3G APD detectors.
0 to 10dB at 12G when fitted with optional /12G components.
Web Server Web Server
-
Due to our policy of continuing development, these specifications are subject to change without notice.
I.R.T. Communications Pty Ltd
MiniLinx-1000 MiniLinx-1000/4Tx+2Rx and MiniLinx-1000/4Rx+2Tx
The MiniLinx-1000/4Tx+2Rx and MiniLinx-1000/4Rx+2Tx models are designed to operate together as a pair. They form a
4-channel forward, 2-channel reverse fibre link.
Bi-directional 1G or 10G Ethernet option available with the addition of +E or +10E to the part number.
12G-SDI and 6G-SDI inputs and outputs applicable to 12G versions only, as designated by a /12G in the part number.
MiniLinx-1000 Front Panel:
MiniLinx-1000/4Tx+2Rx+E Rear Panel: (Ethernet Option)
Inputs Outputs
MiniLinx-1000/4Rx+2Tx Rear Panel: (Non-Ethernet Option)
Outputs Inputs
BLOCK DIAGRAM MiniLinx-1000/4Tx+2Rx+E | MiniLinx-1000/4Rx+2Tx+E SIGNAL PATH
Ethernet
(1G/10G)
Ethernet
(1G/10G)
(4 Tx)
12G-SDI
6G-SDI
3G-SDI
HD-SDI
SD-SDI
ASI
(2 Rx)
Fibre Link
0-14dB*
(typically >16dB at HD
and SD)
MiniLinx-1000
/4Tx+2Rx+E
IN 1
IN 2
IN 3
IN 4
Fibre I/O
OUT 1
OUT 2
Ethernet
MiniLinx-1000
/4Rx+2Tx+E
OUT 1
OUT 2
OUT 3
OUT 4
Fibre I/O
IN 1
IN 2
Ethernet
(4 Rx)
12G-SDI
6G-SDI
3G-SDI
HD-SDI
SD-SDI
ASI
(2 Tx)
NOTE: * When fitted with 3G PIN detectors (standard).
5 to 23dB at 3G, typically >26dB at HD and SD, when fitted with
optional 3G APD detectors.
0 to 10dB at 12G when fitted with optional /12G components.
Web Server Web Server
-
Due to our policy of continuing development, these specifications are subject to change without notice.
I.R.T. Communications Pty Ltd
MiniLinx-1000 MiniLinx-1000/4Tx and MiniLinx-1000/4Rx
The MiniLinx-1000/4Tx and MiniLinx-1000/4Rx models are designed to operate together as a pair. They form a 4-channel single
direction fibre link.
Bi-directional 1G or 10G Ethernet option available with the addition of +E or +10E to the part number.
12G-SDI and 6G-SDI inputs and outputs applicable to 12G versions only, as designated by a /12G in the part number.
MiniLinx-1000 Front Panel:
MiniLinx-1000/4Tx+E Rear Panel: (Ethernet Option)
Inputs
MiniLinx-1000/4Rx Rear Panel: (Non-Ethernet Option)
Outputs
BLOCK DIAGRAM MiniLinx-1000/4Tx+E | MiniLinx-1000/4Rx+E SIGNAL PATH
Ethernet
(1G/10G)
Ethernet
(1G/10G)
(4 Tx)
12G-SDI
6G-SDI
3G-SDI
HD-SDI
SD-SDI
ASIFibre Link
0-16dB*
(typically >18dB at HD
and SD)
MiniLinx-1000
/4Tx+E
IN 1
IN 2
IN 3
IN 4
Fibre O/P
Ethernet
MiniLinx-1000
/4Rx+E
OUT 1
OUT 2
OUT 3
OUT 4
Fibre I/P
Ethernet
(4 Rx)
12G-SDI
6G-SDI
3G-SDI
HD-SDI
SD-SDI
ASI
NOTE: * When fitted with 3G PIN detectors (standard).
7 to 25dB at 3G, typically >28dB at HD and SD, when fitted with
optional 3G APD detectors.
0 to 12dB at 12G when fitted with optional /12G components.
Web Server Web Server
-
Due to our policy of continuing development, these specifications are subject to change without notice.
I.R.T. Communications Pty Ltd
MiniLinx-1000 MiniLinx-1000/2Tx+2Rx and MiniLinx-1000/2Rx+2Tx
The MiniLinx-1000/2Tx+2Rx and MiniLinx-1000/2Rx+2Tx models are designed to operate together as a pair. They form a
2-channel forward, 2-channel reverse fibre link.
Bi-directional 1G or 10G Ethernet option available with the addition of +E or +10E to the part number.
12G-SDI and 6G-SDI inputs and outputs applicable to 12G versions only, as designated by a /12G in the part number.
MiniLinx-1000 Front Panel:
MiniLinx-1000/2Tx+2Rx+E Rear Panel: (Ethernet Option)
Inputs Outputs
MiniLinx-1000/2Rx+2Tx Rear Panel: (Non-Ethernet Option)
Outputs Inputs
BLOCK DIAGRAM MiniLinx-1000/2Tx+2Rx+E | MiniLinx-1000/2Rx+2Tx+E SIGNAL PATH
Ethernet
(1G/10G)
Ethernet
(1G/10G)
(2 Tx)
12G-SDI
6G-SDI
3G-SDI
HD-SDI
SD-SDI
ASI
(2 Rx)
Fibre Link
0-16dB*
(typically >18dB at HD
and SD)
MiniLinx-1000
/2Tx+2Rx+E
IN 1
IN 2
Fibre I/O
OUT 1
OUT 2
Ethernet
MiniLinx-1000
/2Rx+2Tx+E
OUT 1
OUT 2
Fibre I/O
IN 1
IN 2
Ethernet
(2 Rx)
12G-SDI
6G-SDI
3G-SDI
HD-SDI
SD-SDI
ASI
(2 Tx)
NOTE: * When fitted with 3G PIN detectors (standard).
7 to 25dB at 3G, typically >28dB at HD and SD, when fitted with
optional 3G APD detectors.
0 to 12dB at 12G when fitted with optional /12G components.
Web Server Web Server