NOMINAL LENGTH + 1-1/32

NOMINAL SIZE

NOMINAL SIZE - 11/16

1-7/8

NO

MIN

AL

HEI

GH

T +

1-1/

32

AL1 CORE SHOWN

OPTIONAL REAR LOUVERS

OPTIONAL MOUNTINGTAB FOR USE WITH

5/8" DRYWALL

PLASTER FINISHSMOOTH

Product information is subject to change without notice.Drawing is not to scale.

SUBMITTED BY:JOB NAME:All dimensions are in inches.

Model AL / TLALUMINUM LINEAR

BAR GRILLESBF BORDER

(PLASTER FRAME)

DWG# AL-S-0033 Date 01-26-21

PRODUCT FEATURES• “Plaster in Place” BF frame for high end

appearance• Extruded aluminum construction• Lengths to 120” for full sections.

Unlimited length continuous runs (96”max sections) using frame alignmentstrips

• Alignment hardware shipped loose• Core construction – see Core Options

w w w . a n e m o s t a t - h v a c . c o mSubmittal Sheet

A I R D I S T R I B U T I O N

CONSTRUCTION DETAILSMaterial: Extruded Aluminum

Finish:

Arctic White Baked Finish

Natural Anodize

Custom Color ___________________

CORE CONSTRUCTION� See Core Options submittal sheet

ACCESSORIES

OB-1-ST Opposed Blade Damper (Steel)

OB-1-AL Opposed Blade Damper (Alum)

OPTIONAL OPPOSED BLADE DAMPER

2-1/4

(NOTE: Opposed Blade Dampers available whenNominal Height is 4” or greater. Flap damper isused when less than 4”)

REV A

F Product information is subject to change without notice.Drawing is not to scale.

SUBMITTED BY:JOB NAME:All dimensions are in inches.

Model AIRLINEALUMINUM LINEAR

BAR GRILLESCORE OPTIONS

DWG# AL-S-0032 Date 11-12-13

PRODUCT FEATURES• Extruded aluminum construction• (7) Cores to choose from for appearance and deflection angle• Removable core is standard on heights to 18”• Non-removable core on heights over 18” (welded)• Double deflection option includes rear louvers (individually adjustable) for spread control

www.anemos t a t - h vac . comSUBMITTAL SHEET

A IR D ISTR IBUT ION

Cores are removable

DEFLECTING BAR 15° STANDARD

DEFLECTING BAR 0° STANDARD

AL15*SINGLE

DEFLECTION

AL25*DOUBLE

DEFLECTION

AL1*SINGLE

DEFLECTION

AL2*DOUBLE

DEFLECTION

3/4

3/4

1/2 1/4

1/2 1/4

3/4

DEFLECTING BAR 45° STANDARD

3/161/2AL45*SINGLE

DEFLECTION

AL245*DOUBLE

DEFLECTION

(Spread Control)

DEFLECTING BAR 15° THINLINE

DEFLECTING BAR 0° THINLINE

1/4

1/4

3/4

3/4

1/8

1/8

TL15N*SINGLE

DEFLECTION

TL25N*DOUBLE

DEFLECTION

TL1N*SINGLE

DEFLECTION

TL2N*DOUBLE

DEFLECTION

DEFLECTING BAR 0° THINLINE

DEFLECTING BAR 15° THINLINE

TL15WSINGLE

DEFLECTION

TL25WDOUBLE

DEFLECTION

TL1WSINGLE

DEFLECTION

TL2WDOUBLE

DEFLECTION

3/4

3/4

1/2 1/8

1/2 1/8

Core cross bars are on 10" centers for AL style cores, 5" centers for TL style cores.Cross bars are 5" centers for all cores used with floor reinforcement.

TYPICAL CORE ASSEMBLY

*PENCIL PROOF: Models AL1, AL2, AL15, AL25, AL45, AL245, TL1N, TL2N, TL15N, TL25N are pencil proof

PENCIL PROOF

PENCIL PROOF