MODEL

www.amt.com

The VTM-2400 multiformat on-screen monitorcontinues the Videotek tradition of enablingcost-effective monitoring of HD-SDI. Basedon patented Videotek® VTM Series™ technology,the VTM-2400 is an easy-to-operate tool formonitoring and measuring HD-SDI (1080 and 720)signals- and optionally for monitoring SD-SDI (525 and 625) signals on any XGA-capable monitor. The output display includes video picture, waveform, vector and alarm status or optional audio- each inone quadrant of the screen, or any element in a full- screen view.

The VTM-2400 also optionally accepts four AES/EBUstereo pairs, four mono or two stereo analog inputsand embedded audio from the SDI inputs. Audio canbe displayed as two- or four-channel bar graph meters with a phase bar and Lissajous readout for each meterpair.

Alarms include RGB Gamut, Loss of Signal, Loss of Video, CRC (HD) and EDH (with optional SD) for video,and Peak Audio and Loss of Sound with optional audio.For extra convenience, four presets store user setups.

VTM-2400VTM-2400HD Multiformat On-screen Monitor

TEST & MEASUREMENT

FEATURES

� Two looping HD-SDI inputs withauto-detection of input format

� On-screen display of picture, waveform,Vector and audio/alarm

� XGA display output� Alarms include loss of signal, loss of

Video, CRC (HD), EDH (with optional SD),RGB gamut, peak audio and loss of soundwith optional audio

� Four user presets� Standards supported SMPTE 292M and

SMPTE 259M-C (with optional SD)

OPTIONS

� SD-SDI input support� Audio option for monitoring of analog,

digital and embedded audio� Remote control panel

www.amt.comwww.amt.com

VIDEOInputs A and B: (digital) 1080i/60, 1080i/59.94, 1080i/50, 1080p/30,

1080p/29.97, 1080p/25, 1080p/24, 1080p/23.98,1080p/30sF, 1080p/29.97sF, 1080p/25sF, 1080p/24sF,1080p/23.98sF, 720p/60, 720p/59.94, 720p/50,720p/30, 720p/29.97, 720p/24, 720p/23.98 auto-detectOption to add 525/59.94 or 625/50 auto-detect

Data Rate 1.485 Gb/s, option to add 270 Mb/s auto-detectLevel 800mV, nominalReturn Loss ≤-15 dB, 5 MHz to 1.485 GHzConnectors 4 BNC, Hi-Z passive looping

REFERENCEInput NTSC/PAL blackburst or composite video, tri-level sync

auto detect (per SMPTE 274M)Signal Level NTSC: blackburst 286 mV p-p ± 6 dB

PAL: sync and burst 300 mV p-p ± 6 dBTri-level: 600 mV p-p ± 3 dB

Connectors 2 BNC, Hi-Z loopingReturn Loss ≤-40 dB, 100kHz to 5 MHz

XGA OUTPUTOutput Level 1V p-p, or 0.7V p-p menu-selectableHorizontal Sync 48,363 Hz ±1%Vertical Sync 60.004 Hz ±1%

AUDIO (optional)Input (analog) 4 monophonic or 2 stereo channels, balanced or

unbalancedMaximum Input Level +24 dBuInput Impedance ≥ 20K ohmsConnector 37-pin D-sub maleInput (Digital) 4 AES/EBUInput Impedance 75 ohms nominalConnector 4 BNCOutput (Analog) 4 monophonic or 2 stereo channels, balanced or

unbalancedOutput Level +4 dBu ± 1 dB with input at reference levelMaximum Output Level +24 dBuOutput Impedance 10 ohms unbalanced, 20 ohms balanced (nominal)Connector 37-pin D-sub male (shared with input)

CONTROLGPI Input selection, momentary closureInput Impedance 10K ohms returned to + 5VGPO Contact closure on selected alarm

Connector 15-pin D-sub femaleRemote RJ-11 female for use with the RCU-VTM-2400

DISPLAYGeneral Picture, waveform, vector and audio or alarm

simultaneously in a 4-quadrant display, or a full screendisplay of each of these separately

Waveform YCbCr, RGB, YRGBSweep Time Base 1 H, 2 H or 3H with x1, x5, x10 magnification

1 V, 2V or 3V with x1, x5, x10, x25 magnificationWaveform Accuracy ± 1%Vector Cr vs. CbVector Accuracy ± 1 degree

POWER REQUIREMENTSPower Input 90 to 260 VAC, 50/60 Hz, nominal

MECHANICALHeight 1.75” (4.5 cm)Width 19” (48.3 cm)Depth 15.5” (39.4 cm)Weight 8.25 lb (3.74 kg)

ENVIRONMENTALOperating Temperature 0° to 50° CStorage Temperature -40° to 65° CHumidity 90% maximum (non-condensing)Operating Altitude To 10,000 feet (3,050 m) above sea level

STANDARD ACCESSORIESOperator’s manualGPI/GPO breakoutRackmount kitPower Cord

OPTIONSVTM-OPT 2400SD Adds support for SD-SDI (525/59.94 and 625/50)VTM-A3-OPT 1 Analog, AES/EBU and embedded audio for VTM-2000

and VTM-2400RCU-VTM-2400 Remote Control PanelEPC European Power CordEPC-UK United Kingdom Power CordEPC-AA Australia Power Cord

Specifications

ANALOG AUDIO INPUT/OUTPUT DIGITAL AUDIO INPUTS

REMOTE XGA OUT LTC/GPI

VFLASH SDI INPUTS

4

B

3 2

A

1

REF I

US LISTED

C AUDIO VIDEO

APPARATUS 3JUX

INPUT:115-230V ~

50-60Hz90W MAX1A MAX

www.amt.com

Advanced Media Technologies, Inc. • 720 South Powerline Road, Suite G, Deerfield Beach, FL 33442 (888) 293-5856 • (954) 427-5711 • Fax (954) 427-9688

®