module 7 radiation detection, american fork fire rescue
TRANSCRIPT
1
Radiation Detection
1
2
ObjectivesIdentify sources of radiation Describe the basis of radiation Identify types of radiation Describe radiation dose and its impact on
humans Identify the common types of radiation
detection devices
2
3
IntroductionMost responder are uncomfortable in dealing
with a radiation response
They lack in-depth understanding of radiation and its hazards.
With terrorism on the rise responders need to be comfortable with the detection and monitoring radiation.Nuclear detonation is very unlikely.
4
IntroductionRadiological dispersion device (RDD) is, using a
conventional explosive to distribute radioactive materials.
There is any number of potential sources of radiation that could be used.
Radiation detectors for responders are divided into two major groups.
One measures exposure to radiation.One measures the current amount of radiation
in the area.To be effective measure radiation you will need at
least two detectors. There is not one detector that measures all 5 types of radiation. 4
5
Sources of Radiation We are subject to radiation every day
Our bodies have radioactive substances We eat foods containing radiation every day We breathe in radiation with out harm everyday
Our exposure to common radiation sources far exceeds those that would be found at a nuclear power plant Television, Medical test, Elevation
We are subjected to radiation that causes us no harm under normal circumstances
5
6
How Can Radiation Hurt UsBasic atom (nucleus) Electrons, neutrons, and protons Protons and neutrons reside in nucleus Electrons are negatively charged and
orbit the nucleus Protons have a positive charge and
determine the element or type of atom Neutrons are same size as protons but
neutral
6
7
How Can Radiation Hurt UsEach element, with a given number of
protons, can assume several forms, or isotopes.
Which are determined by the number of neutrons in the nucleus?
The chemical properties of each isotope of an element are the same.
If there are too few or too many neutrons the nucleus becomes unstable.
7
8
RadioisotopesIsotopes, whose nuclei are unstable, are
radioactive and emit radiation to regain stability.
This emission of radiation, is known as radioactive decay
Usually takes form of Gamma radiation. May also be Alpha, Beta, or Neutron?
Unstable materials may become stable after one or two decays.
Others may take many decay cycles.
8
RadioisotopesRadioisotope decays
by the emission of an alpha or beta particle.
The number of protons in the nucleus changes.
The radioisotope becomes a different element
ExamplesUranium is the base
for the development of Radon
Common radioactive gas found in homes
Radon decays into lead.
Cobalt-60 Beta and Gamma
energy emitted Decays to form
Nickel-60 9
Half-LifeAmount of time for half of a radioactive
source to decay
Activity of a source of radioactive material is a measure of the number of decays per second that occur within it.
Physical size of radioactive source is not an indicator of radioactive strength or activity.
10
11
Radiation DoseAs confusing as understanding the makeup of a
radioactive material, so is the calculation of the radiation dose.
Three measurements can be used to describe radiation dose.
Absorbed dose
Equivalent dose
Effective dose
11
$499
$595
Absorbed DoseMeasurement of energy transferred to a
material by radiationMeasured in units called
Gray (Gy) Radiation absorbed dose (rad)
I gray = 100 ra
1212
13
Absorbed DoseImpact on humans, we need to understand
the absorbed energy on the body and potential biological damage of radiation on humans. And convert the absorbed dose to equivalent dose.Basic unit of equivalent dose is roentgen.
This value provides for the amount of ionization in
air caused by X-ray or Gamma radiation.
One roentgen equals 1 REM13
14
Absorbed DoseRadiation monitors measure three scales.
REM (R) MilliRem (mR)MicroRem (µR)
The dose of radiation is expressed by a time factor, typically an hour.
14
15
Radiation ProtectionRadiation dose should be kept
“as low as reasonably achievable” ALARA
Three factors that influence radiation dose.
TimeDistanceShielding
16
Radiation ProtectionMinimize dose,
Stay near the radiation source for as little time as possible.
Stand as far away from the source and place as much shielding between people and the source as possible.
Time is important as in many cases a human can sustain a short exposure to radiation without being harmed.Example
Limit your exposure to 1 (mR/hr). Your source is 60 (mR/hr)
You could be at the source for 1 minute
17
Radiation ProtectionDistance from the source also plays a factor.
Inverse square law
Source has a radiation level 20mR/hr at 2 feet
Moving back 4 feet provides an exposure level of 5 mR/hr.
Moving 6 feet would result in an exposure level of 1.25 mR/hr
18
Action Levels1mR/hr Isolation zones
Public protection levels5 R Emergency response
All activities10 R Emergency response
Protecting valuable property25 R Emergency response
Lifesaving or protection of large populations˃ 25R Emergency response
Lifesaving or protection of large population. Only on a voluntary basis for persons who are aware of the risk involved.
19
Radiation MonitorsCurrent radiation monitors provide two
methods of measuring radiation.
REM and counts per minute
REM being the most important to
responders.
20
Radiation MonitorsThere are a variety of detection devices
out there, the important consideration is the probe attached to the unit.
Probe determines the what type of radiation can be detected Alpha, Beta, Gamma
Most common probe are pancakes, this is useful for Alpha radiation.
Radiation MonitorsWhen the amount of
radiation becomes higher we need to switch to the internal probe.These are designed
for the higher level of radiation
When the monitor is turned on it will pick up background radiation.
This is naturally occurring radiation and it should read in micro/rem.
It is important that you go do some field testing in your area to determine normal background.
Then responders know when they are being exposed to radiation at higher levels than background.
21
Types of Radiation DetectorsThree type that are
common Geiger-Mueller
tubesScintillation
crystals Gamma
Spectroscopy
22
23
Types of Radiation DetectorsGM tubes can detect Alpha, Beta, Gamma
Uses electric current, a reaction takes place when radiation interacts with the walls of the tube.
Electrons are freed from the atom and flows to the anode which is in the center of the tube.
This induces an electrical “pulse” which is used to determine when and how much radiation entered the GM tube.
These detectors are generally coupled with a proportional counter, which counts the electrical impulses. You have a choice to count in radiation dose or
counts per minute
Types of Radiation DetectorsScintillation CrystalsUses a crystal that emits
visible light when hit by radiation.Most common is sodium
iodideRadiation hits the
crystal, a pulse of light is produced which is detected by and amplified.
This produces a electrical signal which is measured to determine the amount of radiation that hit the crystal.
Scintillation detectors are best for Gamma.
24
Types of Radiation DetectorsGamma
Spectroscopy
Radiation Isotope Identifier
Can identify the source of the radiation.
25
Types of Radiation DetectorsRadiation Pagers/
DosimeterDetect X-ray and
Gamma radiation, but also will detect high levels of beta.
When the pager is turned on it calibrates itself to the background.
They are designed to alert and provide reading of one-ten times above background.
26
27
SummaryResponders need to become familiar with
radiation detection.Possibility exists for future events.Many radioactive substances exist and when
we deal with unidentified materials we need to check for radiation.
Knowing how to monitor for it is as important as knowing the action levels.