monoprice 28” uhd hdr freesync monitor · hdmi 2 dp 1 dp 2 select signal source. low blue light...
TRANSCRIPT
3840x2160p @60Hz maximum video resolution
5ms GTG response time
300 cd/m² brightness
More than 1.07G colors
170°/160° vertical and horizontal viewing angles
Two HDMI and two DisplayPort input
DP 2: DisplayPort video input supporting the DisplayPort 1.2 specification at resolutions up to 3840x2160p @60Hz.
DP 1: DisplayPort video input supporting the DisplayPort 1.2 specification at resolutions up to 3840x2160p @60Hz.
HDMI 2: HDMI video input supporting the HDMI 2.0 specification at resolutions up to 3840x2160p @60Hz.
HDMI 1: HDMI video input supporting the HDMI 2.0 specification at resolutions up to 3840x2160p @60Hz.
LED Indicator/IR signal receiver
BaseScreen
Main Menu Item
Sub Menu Item
Option Function
Level can be adjusted from 0 to 1000~100BRIGHTNESS0~100CONTRAST
Choose the picture mode:For videos games there is three mode:GAME / FPS / RTS to choose according toyour use.
STANDARDGAMEMOVIETEXTFPSRTS
PICTURE MODE
Dynamic contrast ratio (to add more contrast).
OFF
Level can be adjusted from 0 to 4ONDCR
BRIGHTNESS
H.POSITION 0~100 Not availableV.POSITION 0~100CLOCK 0~100PHASE 0~100
WIDE 4 : 3
ASPECT
IMAGE
COLOR TEMP.COOL
GREENBLUE
NA
REDCOLORTEMP.
OSD H.POS. 0~100OSD V.POS. 0~100
OSD TIME 0~60 Time can be adjusted from 5 sec to 60 sec.
OSDSETTINGS
Level can be adjusted from 0 to 100
SHARPNESS 0~4
Not availableNot availableNot available
Choose aspect ratio
WARMUSER
Choose color temperature.When selectiong USER you can adjusteach level of RED,GREEN,BLUE.Level can be adjusted from 0 to 1000~100Level can be adjusted from 0 to 1000~100Level can be adjusted from 0 to 1000~100
LANGUAGE Choose the OSD menu languageEnglish etc...Level can be adjusted from 0 to 100Level can be adjusted from 0 to 100
TRANSPARENCY 0~100 Level can be adjusted from 0 to 100 COLOR AUTO. ADJUST IMAGE AUTO. ADJUST
NA
RESET Reset all settings to or original factory settings.
AUTOPOWER DOWN
ONOFF Monitor power will turn off when no signal.RESET
HDROFFAUTO2084
Set up the HDR function
0/25/50/75/100
SIGNALSOURCE
HDMI 1HDMI 2DP 1DP 2
Select signal source.
LOW BLUE LIGHT
Main Menu Item
Sub Menu Item
Option Function
About FreeSync
MISC.
Make sure your graphic card supports FreeSync (AMD only but not all AMD graphic carddoes).If the graphics card does not support freesync, turn the function off on the monitor.
About HDR
VOLUME Level can be adjusted from 0 to 100.
FREESYNCON Set up Freesync function ON/OFF (to be set
to OFF when using non-AMD card).
ODSet the overdrive ON or OFF. Setting it ONwill response time faster.
OFF
0~100
ONOFF
Before using this feature, please make sure the input signal source are HDR function of stream in the future.