montreal tel.: 514.367.2252 fax: 514.367.1144...
TRANSCRIPT
EST. 1911
GASKET & RUBBER
MONTREAL Tel.: 514.367.2252 Fax: 514.367.1144MISSISSAUGA Tel.: 905.564.6555 Fax: 905.564.6901EDMONTON Tel.: 780.469.0601 Fax: 780.469.0765
Email: [email protected] Resistant Materials - Engineered Plastics - Rubber Products - Metallic GasketsSoft Gaskets - Mechanical Seals - Compression Packing - Lubricants & Greaseswww.robco.com
Spiral Wound
Semi-Metallic
Ring Joint
Boiler
Compressed
Flexible Graphite
Cork
Mica
Rubber
PTFE
EMI / RFI Shielding
Gasket & Rubber Specialists
We are passionate about problem solving. We take pride in creating substantial value for our customers using our expertise, experience, and technical resources. We believe that given the opportunity, Robco can make a tremendous positive impact on our customers' operational e�ciency by extending the time between equipment failures, eliminating recurring maintenance problems, reducing leaks, and generally alleviating headaches.
Since 1911, Robco products are used everywhere in heavy industry as components of original equipment and in aftermarket mainte-nance and repair.
ISO 9001 and ISO 14001 Certi�ed, our commitment to focusing on engineered solutions has fostered an alignment between our custom-ers’ satisfaction and our success while caring for our environment.
Total Cost of Ownership
Our T.C.O. approach to problem solving often results in our customers achieving annual savings that drastically outweigh their actual purchase costs.
Made in Canada
Robco Gaskets are manufactured at our Edmonton, Toronto and Montreal facilities ensuring unsurpassed quality control and quick turnaround times for our North American customers.
Robco Gasket & Rubber for Heavy Industry
We believe that our value added service, technical and manufacturing expertise can provide annual savings that drastically outweigh your actual purchase costs.
Trad
ition
in In
nova
tion
Manufacturing Capability
To remain competitive on the world market today, we invest in state-of-the-art equipment to produce quality parts at the best possible cost; whether in the fabrication of small batches of intricate parts or for large volume production. We are ready!
Engineering Group
Every day, we develop custom solutions that will suit YOUR applications. You make our work exciting by using our abilities to take up your technical challenges and provide solutions that will �t your needs.
A Long History...
Time �ies! 100 years in business means a lot of expe-rience under our belt in dealing with all kinds of applications. The culture of supporting our custom-ers with products that provide value remains intact. You are in good hands with us!
Metallic and Semi-Metallic Gaskets
You require high pressure, durable gaskets: Robco manufactures them! From grooved Maxipro�le to Spiral Wound types, we produce standard as well as custom sizes.
Elastomer and Gasket Sheeting Materials
Your requirements of speci�c types of soft gaskets can be ful�lled from our vast inventory of raw materials: various grades of cork, sponge rubber, compressed sheet, �exible graphite, modi�ed-PTFE and all popular elastomers such as Natural Rubber, SBR, EPDM, Chloroprene, Nitrile, Hypalon and Viton®.
EMI / RFI Shielding Materials
We fabricate with EMI / RFI (electro-magnetic or radio frequency interference) shielding materials that meet MIL-DTL-83528 speci�cations, in a wide array of shapes and extrusions.
Servicing Heavy Industry
We know the Industry
Over the last century, we have supplied gasket materials for all possible applications. Our specialized engineers will provide information and advice towards identifying the optimal product for any application.
Expert Customer Service
Our on-site Technicians, Gasket Specialists and Customer Service departments are availlable to guide you and answer all your questions in the selection of the ideal product for your application.
Robco Gasket & Rubber for Heavy Industry
We believe that our value added service, technical and manufacturing expertise can provide annual savings that drastically outweigh your actual purchase costs.
Trad
ition
in In
nova
tion
Manufacturing Capability
To remain competitive on the world market today, we invest in state-of-the-art equipment to produce quality parts at the best possible cost; whether in the fabrication of small batches of intricate parts or for large volume production. We are ready!
Engineering Group
Every day, we develop custom solutions that will suit YOUR applications. You make our work exciting by using our abilities to take up your technical challenges and provide solutions that will �t your needs.
A Long History...
Time �ies! 100 years in business means a lot of expe-rience under our belt in dealing with all kinds of applications. The culture of supporting our custom-ers with products that provide value remains intact. You are in good hands with us!
Metallic and Semi-Metallic Gaskets
You require high pressure, durable gaskets: Robco manufactures them! From grooved Maxipro�le to Spiral Wound types, we produce standard as well as custom sizes.
Elastomer and Gasket Sheeting Materials
Your requirements of speci�c types of soft gaskets can be ful�lled from our vast inventory of raw materials: various grades of cork, sponge rubber, compressed sheet, �exible graphite, modi�ed-PTFE and all popular elastomers such as Natural Rubber, SBR, EPDM, Chloroprene, Nitrile, Hypalon and Viton®.
EMI / RFI Shielding Materials
We fabricate with EMI / RFI (electro-magnetic or radio frequency interference) shielding materials that meet MIL-DTL-83528 speci�cations, in a wide array of shapes and extrusions.
Servicing Heavy Industry
We know the Industry
Over the last century, we have supplied gasket materials for all possible applications. Our specialized engineers will provide information and advice towards identifying the optimal product for any application.
Expert Customer Service
Our on-site Technicians, Gasket Specialists and Customer Service departments are availlable to guide you and answer all your questions in the selection of the ideal product for your application.
Metal jacket gaskets o�er an economical seal wheresealing faces are narrow.
www.robco.comGasket and RubberMetal Jacketed
Metal JacketSolid design - Solid resultsMetal jacket gaskets are the most basic type of semi-metallic gasket combining the high pressure suitability and blow-out resistance of metallic materials with the improved compressibility of soft materials.
Corrugated MetalGraphite CoatedCMGC gaskets featuring a corrugated metal core with a highly compressible graphite overlay, delivering a reliable gasket with the ability to seal at low bolt loads, conform to minor �ange imperfections and be manu-factured in virtually any con�guration.
Enviro�exSpiral Wound GasketSpiral Wound gaskets consist of metal strips spirally wound with a soft sealing �ller material. This sealing element is assembled with or without a metallic centering and/or inner ring(s). Made to �t #150 to #2500 pipe class �anges, they can be custom-made in various alloys and �llers to meet your requirement, custom sizes and application.
Maxipro�leSemi-Metallic GasketThe Maxipro�le is a composite gasket that utilizes a serrated metal core with a soft facing material. The metal core is machined on each contact face with concentric serrations providing high pressure areas and ensuring that the soft coating�ows into any imperfections in the �ange even at relatively low bolt loads.
Ring JointMetallic Ring Joint GasketMetallic ring joint gaskets are heavy duty, high-pressure gaskets largely used in o�shore petrochemical applications. These precision-engineered components designed for use in conjunc-tion with precision-machined �anges are manufactured in accordance with ASME B16.20 and API 6A.
A logical choice for standard �ange, heat exchanger, boiler and valve sealing applications.
Corrugated Metal
*Enviro�ex MGM withstands higher temperatures
Enviro�ex Spiral Wound Gasket
Suitable for a wide range of operating conditions
1 1/2” - 36 ” (Depending on type/shape)
and Enviro�ex MGM
www.robco.comGasket and Rubber
Can be used for this application Denotes Best Choices
Materials Available:Soft IronStainless Steel Soft SteelMonelInconelIncoloy
BrassAluminumTitaniumNickelBrassCopper
Types:Double Jacketed Single JacketedSingle Corrugated (no filler)Double Jacketed Corrugated(soft filler)
Manufactured to ASME B16.20 specifications
Material Brinell Hardness Temperature Limitation IdentificationSoft Iron 90 Low Carbon Steel 120 4-6% Cr ½% Mo:F5 130 304 SS 160 316 SS 160 321 SS 160 347 SS 160 410 SS 170 Titanium - Inconel - Incoloy - Hastelloy C-276 -
Inconel© 600 & 625Incoloy© 800 & 825Grade 2 & 7 TitaniumAlloy 20Hastelloy© C276Monel© 400
304 Stainless Steel 316 Stainless Steel316L Stainless Steel347 Stainless Steel410 Stainless SteeDuplex 2205
Core Materials Available:
Core Material Max. Temp. Core Material Max. Temp.Stainless Steel 316L 1472ºFStainless Steel 304 1202ºFMonel 400 1472ºFNickel 200 1112ºF
Inconel 600 & 625 1832ºFIncoloy 825 1832ºFHastelloy B2 1832ºFHastelloy C-276 1832ºF
Facing Material Max. Temp.Graphite 1022ºFPTFE 500ºFMica 1832F
Max. Pressure
6000 psi
Maxipro�le Semi-Metallic Gasket
Winding Material Max. Temp. Winding Material Max. Temp.Stainless Steel 304 1200ºF Stainless Steel 316L 1200ºFStainless Steel 316 Ti 1200ºF
Stainless Steel 347 1200ºFMonel 400 1472ºFCarbon Steel 932ºF
Filler Material Max. Temp. Graphite 850ºF PTFE 500ºF Mica 1832ºF
SEM
I-MET
ALL
ICRI
NG
JOIN
TS
Cate
gory
Style NumberMax Temp
ºF
High Temp App.
High Press. App. Acid Caustic Oil Chemical Oxygen Steam Water Gas U.V. Ozone Oxidation Alkalis
Hydro-Carbons
steam/liquidMETAL JACKET As per material
CORRUGATED METAL As per material
ENVIROFLEX SWG As per material
MAXIPROFILE SWG As per material
RJ RING JOINT As per material
200-HM 1500204-SFI 1500210-STI 1500TOP-SIL ML1 400QUANTUM 660C-4300 400-700C-4401 450-750C-4408 450-750C-4409 550-775C-4430 500-800C-4433 500-800C-4439 500-800C-4500 550-850C-4509 550-850C-5400 400-725C-6400 400-725C-7400 400-675C-8200 300-400MILAM PSS 1832THERMICA 752SOFT-CHEM 500TOP-CHEM 2000 482TOP-CHEM 2003 482TOP-CHEM 2005 482TOP-CHEM 2006 482ROBCHEM CF-500 500ROBCHEM CF-504 500ROBCHEM CF-510 500SEALON 500VIRGIN PTFE 500JOINTEX 500435 180460 185464 180465 200466 200467 2009370 2009863 200EP-60 250EPP-60 300SI-60 450VI-75 362423-SBR-CI 1802919 na5700 2125717 212602 1501523 160SC-41 180SC-42 180SC-43 180WHITE SILICONE -M.C. URETHANE -100N -E-30 -E-40 -E-50 -E-70 -FKS 300GRC-36 -H-35 -H-45 -H-55 -N104 250TRANSILCOR -HYDROIL 250
Rub
ber M
ater
ials
Spon
ge R
ubbe
rC
ork
/ Rub
ber
Sem
i-Met
allic
Flex
ible
G
raph
iteC
ompr
esse
d M
ater
ials
Mic
aPT
FE b
ased
mat
eria
ls
23UV
-60 to 400°C D -40 to 500°C S-250 to 500°C F5 -250 to 650°C S304 -110 to 800°C S316 -250 to 870°C S321 -250 to 870°C S347 -20 to 500°C S410 350ºC TI 500°C 625 500°C 825 1000°C C-276
Gasket and Rubber
Low pressure applications
60”L x 60”W 1/32“ - 1/8”
www.robco.comGasket and RubberRobco 200-HM
Robco 200-HM 99% Pure Graphite without reinforcementA homogenous graphite gasket sheet for use in sealing conditions where low internal pressures exist. High quality industrial-grade (99% carbon) sealing element with low ash content and low leachable chloride levels, o�ers high compressibility and low creep.
Robco 204-SFI Stainless Steel Foil-reinforced Graphite SheetRobco 204 SFI is a material of choice for sealing medium pressure applications. Robco 204 SFI can be used in a wide variety of chemicals applications.
Robco 210-STI Stainless Steel Tang-reinforced Graphite SheetRobco 210 STI excels in aggressive, high temperature, high pressure applications. Can replace spiral wound gaskets in large and custom sizes. 210 STI is the choice material to ensure a long-lasting seal in di�cult appli-cations.
KLINGER Quantum2nd Generation Compressed Fiber SheetingExclusively HNBR bound, Quantum o�ers excellent temperature resistance across a much broader range of chemicals than all other �ber reinforced gasket materials. Klinger Quantum is FDA compliant for food applications and �re tested as per API 607/ISO 10497.
General Purpose
Robco 204-SFI
High-pressure / High temperature
Robco 210-STI
Best innovation in the �ber reinforced gasket composite
Robco QuantumCompressibility
10%Recovery60% min.
Stress RelaxationBS7531 3916 psi
Klinger Hot Compression Test, 7251 psi Thickness Decrease@73ºF 10%
@572ºF 14%
@752ºF 20%
Thickness Increase after immersion in ASTM Oil 3 3%
ASTM Fuel B 5%
Density106 lb/ft³
www.robco.com
Robco Transilcor Silicone and CorkTransilcor is a premium silicone and cork material with medium compressibility and good oil resistance. A superior silicone base material for medium bolting pressure with excellent thermal stability.
Robco HydroilVegetable Fiber SheetHydroil provides fair sealability, good conformability and good resistance to petroleum oils, fuel oils and many organic solvents. This cellulose �ber gasket material with a protein and glycerin binder is an low-cost light duty, general purpose gasket material. Not intended for sealing water where exposure to drying exists.
Excellent thermal stability
Robco Transilcor
Low cost gasket material.
Robco Hydroil
Compression Set70% Max.
Recovery80% min.
Thickness Increase after immersion in ASTM Oil 1 10%
ASTM Fuel A 20%
Density50 lb/ft³Flexibility
3 Max. (Factor)Tensile Strength
350 psi Min.Max. Hardness
75 DuroMax. Comp. @ 400psi
28 %
Shore A 60 - 70
Max. Temperature250ºF
Max. Pressure 2000 psi
Weight Increase after immersion in ASTM Oil 3 15%
ASTM Fuel B 15%
DensityNA
Max. Comp.40%
Max. Comp. @ 400psi15 %
Compressibility44%
Recovery15% min.
Creep Relaxation5%
Temp. Oxidizing -400ºF - 850ºF
Temp. Mild-Oxidizing-400ºF - 1200ºF
Sealability0.5 ml/hr
Gasket Factor / m1.25
Gasket Factor / y700 psi
Temp. Non-Oxidizing-400ºF - 5400ºF
Compressibility42%
Recovery17% min.
Creep Relaxation5%
Temp. Oxidizing -400ºF - 850ºF
Temp. Mild-Oxidizing-400ºF - 1200ºF
SealabilityNA
Gasket Factor / m2
Gasket Factor / y900 psi
Temp. Non-Oxidizing-400ºF - 1800ºF
Compressibility42%
Recovery17% min.
Creep Relaxation5%
Temp. Oxidizing -400ºF - 850ºF
Temp. Mild-Oxidizing-400ºF - 1200ºF
Operating Pressure1200 psi max.
Gasket Factor / m2
Gasket Factor / y2500 psi
Temp. Non-Oxidizing-400ºF - 5400ºF
Note: This brochure shows only the most commonly used products. Other materials and composites are available upon request. Contact your Robco representative for technical details and additional speci�cations.
2
2
2
ROLL WIDTH SHEET SIZE* THICKNESS (*typically in stock)
Meets MIL-G-12803A Id No. P3313B andMIL-G-12803B/C Id No. F326128M6 speci�cations
Quantum® is a trademark of Klinger Group
60”L x 60”W 1/32“ - 1/8”
60”L x 60”W 1/32“ - 1/8”
78”L x 59”W 1/32“ - 1/8”
36”L x 36”W 1/16“ - 1/4”
36”W 0.01” - 1/8”
Thickness Increase after immersion in ASTM Oil 3 5%
ASTM Fuel B 5%
Boiler GasketsHandhole and manhole gaskets
Rubber MatsMats for Industrial, Commercial, Food Service, Static and Electrical Applications
Small PartsGrommets, O-Rings, Washers
TubingSleeves, Cords, Strips, Pro�les and more...
Robco provides various types of gaskets for boilers, heaters and other high temperature and/or high pressure vessels.
Our rubber sheeting can be cut and manufactured as �oor and surface matting speci�c to your application with machined groves, holes, patterns, etc. per your speci�cations.
We manufacture small rubber parts such as grommets, o-rings, washers, spacers, stoppers and plugs to suit your needs.
Tubing, cord and pro�le parts can be ordered from our wide range of specialized rubber materials such as EPDM, Viton, NBR, Nitrile, Neoprene and so much more...
23
HIGH HIGH LOW CHEMICAL ACID CAUSTIC ALKALIS OXIDATION
OXYGEN OZONE OIL WATER STEAM U.V. PULP & FOOD
GAS PETROL AERO- PHARMA- HYDRO- HEAVY
PRESS. TEMP. TEMP. APPS. APPS. APPS. APPS. APPS.
APPS. APPS. APPS. APPS. APPS. EXPOSURE PAPER INDUSTRY
INDUSTRY INDUSTRY SPACE CEUTICALS CARBONS INDUSTRIAL
Disclaimer: The data contained in this brochure is representative; These ratings supplied are suggested as a guideline and should only be used for evaluating your speci�c application. When in doubt, contact Robco. The information contained in this speci�cation sheet should not be considered a warranty, either expressed or implied, including, but not limited to, a warranty of merchantability or �tness for a particular purpose. In no event shall Robco be liable for any incidental or consequential damages resulting from the use, misuse or inability to use the product. This exclusion applies regardless of whether such damages are sought based on breach of warranty, breach of contract, negligence, strict liability in tort, or any other legal theory.
FLEX
IBLE
GRA
PHIT
ECO
MPR
ESSE
D M
ATER
IAL
KLINGER Top-Sil-ML1Synthetic Fibers and ElastomersA combination of synthetic �bers and various elastomers bound in a multi-layer structure. Top-Sil ML1 has excellent properties such as less creep, high permissible load, delayed aging and leak-free sealing at high temperatures. Suitable for use in steam, oils, fuels, hydrocarbons and potable water.
Innovative multi-layered material
Klinger Top-Sil-ML1Compressibility
9%Recovery50% min.
Creep RelaxationNA
Thickness Decrease@Compression 7251 psi @73ºF 8%
@572ºF 15%
Thickness Increase after immersion in ASTM Oil IRM 4%
ASTM Fuel B 8%
Density106 lb/ft³
SealabilityNA
78”L x 59”W 1/32“ - 1/8”
CORK
/ R
UBB
ER M
ATER
IALS
OTH
ER P
ROD
UC
TSLE
GEN
D
UV
General purpose sheet with good chemical resistance
www.robco.comGasket and RubberKlingersil C-4300
KLINGERsil C-4300Aramid FibersC-4300 is a general purpose material manufactured from aramid �bers with an NBR binder and is com-monly used with hydrocarbons, fuels, oils and water. Provides good sealability and good chemical resist-ance.
KLINGERsil C-4401Synthetic FibersOur most popular material suitable for use with air, water, steam, oils, fuels, and gases. Particularly suited for use in internal combustion engines, compressors, and hydraulic applications.
KLINGERsil C-4408Wire ReinforcedC-4408 material is a synthetic �ber based material with a nitrile binder reinforced with a steel woven mesh insert. Recommended for applications under high stress, vibration and �uctuating temperatures and pressures.
KLINGERsil C-4409Carbon Steel InsertC-4409 is a synthetic �ber and nitrile binder reinforced with a galvanized low carbon steel insert excellent for use in hot gases, vibration and high temperature and pressure applications. C-4409 is used as a replacement for Spiral Wound Gaskets.
KLINGERsil C-4430Fiberglass and Aramid FibersGlass �ber based with an NBR binder for use in a wide range of chemical applications. A premium grade compressed �ber material with exceptional compressive strength and good chemical and temperature resistance. For oil, steam, hydro-carbon, oxygen and water applications.
Good general purpose material
Klingersil C-4401
Suitable for �uctuating temperatures & pressures
Klingersil C-4408
Excellent for hot gases and high pressure applications
Klingersil C-4409
Premium grade material and excellent steam sheet
Klingersil C-4430
Compressibility10%
Recovery50% min.
Creep Relaxation25 %
@572ºF 25%
Thickness Increase after immersion in ASTM Oil 1 5%
ASTM Fuel B 10%
Density100 lb/ft³
Compressibility7%
Recovery50% min.
Creep Relaxation20%
Thickness Decrease@Compression 7251 psi @73ºF 10.5%
@572ºF 17%
Thickness Increase after immersion in ASTM Oil 1 5%
ASTM Fuel B 7%
Density112 lb/ft³
Sealability<0.5 ml/hr
Thickness Decrease@Compression 7251 psi @73ºF 10.5%
Sealability<0.25 ml/hr
Compressibility8%
Recovery50% min.
Creep Relaxation20%
Thickness Decrease@Compression 7251 psi @73ºF 10%
@572ºF 22%
Thickness Increase after immersion in ASTM Oil 1 5%
ASTM Fuel B 5%
Density119 lb/ft³
SealabilityNA
Compressibility7%
Recovery50% min.
Creep Relaxation20%
Thickness Decrease@Compression 7251 psi @73ºF 10%
@572ºF 10%
Thickness Increase after immersion in ASTM Oil 1 5%
ASTM Fuel B 5%
Density125 lb/ft³
SealabilityNA
Compressibility9%
Recovery50% min.
Creep Relaxation20%
Thickness Decrease@Compression 7251 psi @73ºF 8%
@572ºF 11%
Thickness Increase after immersion in ASTM Oil 1 5%
ASTM Fuel B 5%
Density96 lb/ft³
SealabilityNA
2
2
Klingersil® is a trademark of Klinger Group
60”L x 60”W 1/64“ - 1/8”
60”L x 60”W 0.008“ - 1/8”
60”L x 60”W 1/32“ - 1/8”
60”L x 60”W 3/64“ - 1/8”
60”L x 60”W 1/64“ - 1/8”
80”L x 80”W Available in 1/8” thick
COM
PRES
SED
MAT
ERIA
Lwww.robco.comGasket and Rubber
Robco GRC-36Economy Grade An economical grade cork co-polymer with medium fuel and oil resistance and medium compressibility. Ideal for the automotive aftermarket.
Robco H-35Nitrile and Cork - RollTop quality nitrile and cork material that is highly compressible with good sealing capability at low bolting pressure. Resistant to oil, aromatic fuel and solvent.
Ideal for the automotive aftermarket
Robco GRC-36
Resistance to oil, fuels and solvents
Robco H-35
Compression Set70% Max.
Recovery80% min.
Thickness Increase after immersion in ASTM Oil 1 10%
ASTM Fuel A 10%
Density30 lb/ft³Flexibility
1 Max. (Factor)Tensile Strength
140 psi Min.Max. Hardness
60 DuroMax. Comp. @ 400psi
55%
Shore A 50 - 60
Compression Set80% Max.
Recovery80% min.
Thickness Increase after immersion in ASTM Oil 1 10%
ASTM Fuel A 10%
Density33 lb/ft³Flexibility
3 Max. (Factor)Tensile Strength
250 psi Min.Max. Hardness
60 DuroMax. Comp. @ 400psi
45 %
Shore A 10 - 60
36”L x 36”W 1/32“ - 1/2”
42”W 1/32” - 1/4”
42”W 1/32” - 1/4”
Shore A 10 - 65
Robco H-45Nitrile and Cork - SheetTop quality nitrile and cork material that is compressible with good sealing capability at low bolting pressure. Highly resistant to oil, aromatic fuel and solvent.
High resistance to oil, fuels and solvents
Robco H-35Compression Set
80% Max.Recovery75% min.
Thickness Increase after immersion in ASTM Oil 1 10%
ASTM Fuel A 15%
Density8 lb/ft³
Flexibility3 Max. (Factor)
Tensile Strength250 psi Min.
Max. Hardness65 Duro
Max. Comp. @ 400psi35 %
Perfect for high bolting pressure seals
Robco H-55Robco H-55Nitrile and CorkA nitrile and cork material with high tensile and tear strength. Perfect for high bolting pressure seals includ-ing those recommended for automotive, fuel pumps, meters and general industrial applications.
Robco N104Economical Cork Sheet Bonded cork sheet recommended as a lining and facing material, for sporting goods, bulletin boards and die cut parts.
Economical cork sheet for non-gasket applications
Robco N104
Compression Set55% Max.
Recovery75% min.
Thickness Increase after immersion in ASTM Oil 1 10%
ASTM Fuel A 10%
Density46 lb/ft³Flexibility
3 Max. (Factor)Tensile Strength
250 psi Min.Max. Hardness
80 DuroMax. Comp. @ 400psi
25 %
Shore A 60 - 80
Max.Temperature250ºF
Recovery80% min.
Thickness Increase after immersion in NA
NA
Density13.7 lb/ft³Flexibility
5 Max. (Factor)Tensile Strength
75 psi Min.Max. Hardness
NAMax. Comp. @ 100psi
40 %
36”L x 36”W 1/32“ - 1/2”
48”W 1/32” - 1/4”
CORK
/ R
UBB
ER M
ATER
IALS
Best general purpose sheet . Fire-tested
www.robco.comGasket and RubberKlingersil C-4433
KLINGERsil C-4433Fiberglass, Aramid & Inorganic FibersGreat general purpose material with good chemical resistance and mechanical properties. Best overall steam sheet with the best load bearing capability avail-able in an asbestos-free gasket. C-4433 has passed the �re test criteria of API 607 Fourth Edition.
KLINGERsil C-4439Fiberglass & Aramid, Steel ReinforcedA top quality synthetic �ber based material with a nitrile rubber binder. The addition of galvanized low carbon steel reinforcement provides high pressure resistance. C-4439 has passed the �re test criteria of API 607 Fourth Edition.
KLINGERsil C-4500Carbon FibersA premium grade carbon �ber based material with an NBR binder designed for use under high temperatures and pressures. A universal material with good steam, oil, and chemical resistance. Particularly suited for use in highly alkaline applications, high internal pressure applications and those requiring good load bearing characteristics.
KLINGERsil C-4509Carbon Fibers, Steel reinforcedA top quality carbon �ber based material with a nitrile rubber binder and an expanded steel reinforcement. Provides greaterresistance to thermal degradation in high pressure applications and increased temperatures. Recommended in a wide range of media including oils, hydrocarbons, alkalis and steam.
KLINGERsil C-5400Synthetic Fibers and NeopreneC-5400 is a blend of synthetic �bers with a neoprene binder. Introduced for service with refrigerants and various oils. Used in all industries where refrigerants are the major service, such as the Food Industry.
Fire-tested and suitable for high pressures
Klingersil C-4439
Suitable for wide range of chemical applications
Klingersil C-4500
Excellent resistance to thermal degradation
Klingersil C-4509
Designed for use with refrigerants
Klingersil C-5400
www.robco.comGasket and Rubber
Klingersil® is a trademark of Klinger Group
Compressibility7%
Recovery60% min.
Creep Relaxation20%
Thickness Decrease@Compression 7251 psi @73ºF 7%
@572ºF 8%
Thickness Increase after immersion in ASTM Oil 1 5%
ASTM Fuel B 7%
Density112 lb/ft³
Sealability <0.5 ml/hr
Compressibility7%
Recovery50% min.
Creep Relaxation20%
Thickness Decrease@Compression 7251 psi @73ºF 8%
@572ºF 4%
Thickness Increase after immersion in ASTM Oil 1 5%
ASTM Fuel B 5-10%
Density131 lb/ft³
SealabilityNA
Compressibility12%
Recovery60% min.
Creep Relaxation20%
Thickness Decrease@Compression 7251 psi @73ºF 10%
@572ºF 15%
Thickness Increase after immersion in ASTM Oil 1 5%
ASTM Fuel B 5%
Density87 lb/ft³
Sealability<0.30 ml/hr
Compressibility12%
Recovery70% min.
Creep Relaxation20%
Thickness Decrease@Compression 7251 psi @73ºF 9%
@572ºF 7%
Thickness Increase after immersion in ASTM Oil 1 5%
ASTM Fuel B 5%
Density125 lb/ft³
SealabilityNA
Compressibility8%
Recovery50% min.
Creep Relaxation20%
Thickness Decrease@Compression 7251 psi @73ºF 11%
@572ºF 21%
Thickness Increase after immersion in ASTM Oil 1 5%
ASTM Fuel B 10%
Density106lb/ft³
Sealability<0.20 ml/hr
60”L x 60”W 1/32“ - 1/8”
60”L x 60”W 1/16“ - 1/8”
60”L x 60”W 1/64“ - 1/8”
60”L x 60”W 3/64“ - 1/8”
60”L x 60”W 1/64“ - 1/8”80”L x 80”W Available in 1/8” thick
Robco E-30 Most Economical Cork GasketE-30 is an economical neoprene and cork material. Suitable for sealing at low bolting pressures in a wide variety of applications.
Most economical cork gasket
Robco E-30Compression Set
60% Max.Recovery95% min.
Thickness Increase after immersion in ASTM Oil 1 10%
ASTM Fuel A NA
Density33 lb/ft³Flexibility
3 Max. (Factor)Tensile Strength
150 psi Min.Max. Hardness
65 DuroMax. Comp. @ 400psi
50%
Shore 50 - 65 36”L x 36”W 1/8“ - 1/4”
For oil sealing, transmissions and automotive gaskets
Robco E-40Robco E-40 Neoprene and CorkE-40 is an excellent medium grade neoprene and cork material used for oil and transmission seals and auto-motive gaskets. A high-quality material with medium compressibility and oil resistance.
Robco E-50General purpose Neoprene and CorkFirm grade neoprene and cork with high tensile strength and tear resistance and low compression set. E-50 has excellent heat resistance and moderate swell-ing in oils and fuels. Also suitable for high bolting pres-sure.
Robco E-70Co-Polymer and CorkAn economical sealing material, E-70 is a soft grade co-polymer and cork material with moderate resistance to fuels. Commonly used in transformers and automo-tive and industrial applications.
General purpose
Robco E-50
Used in transformers and most industrial applications
Robco E-70
Compression Set60% Max.
Recovery80% min.
Thickness Increase after immersion in ASTM Oil 1 20%
ASTM Fuel A 15%
Density44 lb/ft³Flexibility
3 Max. (Factor)Tensile Strength
250 psi Min.Max. Hardness
75 DuroMax. Comp. @ 400psi
35%
Shore A 55 -75
Compression Set55% Max.
Recovery75% min.
Thickness Increase after immersion in ASTM Oil 1 20%
ASTM Fuel A 15%
Density46 lb/ft³Flexibility
3 Max. (Factor)Tensile Strength
250 psi Min.Max. Hardness
70 DuroMax. Comp. @ 400psi
25%
Shore A 10 - 70
Compression Set60% Max.
Recovery75% min.
Thickness Increase after immersion in ASTM Oil 1 10%
ASTM Fuel A 10%
Density43 lb/ft³Flexibility
1 Max. (Factor)Tensile Strength
200 psi Min.Max. Hardness
70 DuroMax. Comp. @ 400psi
45 %
Shore A 60 - 70
36”L x 36”W 1/32“ - 1/4”
36”L x 36”W 1/16“ - 1/4”
36”L x 36”W 1/16“ - 3/8”
Robco FKSBeater Add Gasket SheetMade from cellulose �ber and �ne grain cork with an SBR binder. FKS is extremely compressible, conforming well to rough surfaces. Recommended for use in water and oil applications.
Low pressure, Fuel and oil resistance
Robco FKS
43” W 1/32” - 1/16”
Compressibility33%
Recovery38% min.
ASTM Oil IRM 18%
ASTM Fuel B 18% Water 17%
Density40 lb/ft³
Tensile Strength1241 psi
Max. Temperature300ºF
Creep RelaxationNA
Thickness Increase after immersion in
COM
PRES
SED
MAT
ERIA
L
CORK
/ R
UBB
ER M
ATER
IALS
Good swell characteristics
www.robco.comGasket and RubberKlingersil C-6400
KLINGERsil C-6400Synthetic FibersGeneral purpose commercial material with synthetic �bers and an SBR binder. Suitable for oils, water, light/low pressure steam, and gases. This material has good swell characteristics, yielding a more tightly sealed joint.
KLINGERsil C-7400Synthetic FibersEngineered synthetic material to handle severe service, especially caustics because of its EPDM binder. This style has proven outstanding against light steam duty. Prime industries include pulp & paper, power generation and chemical.
KLINGERsil C-8200Synthetic FibersC-8200 is a compressed �ber material developed for use with a broad range of chemicals; provides particu-larly good resistance to strong acids and alkalis. C-8200 is an economical alternative to PTFE-based materials in less aggressive applications.
KLINGER ThermicaHigh Temperature Gasket MaterialHigh temperature material with a nitrile binder. The addition of mica increases usable temperature range. Exhibits excellent leak tightness, thermal stability and load bearing properties. Suitable for a wide range of low pressure applications including oils, fuels, steam, hydrocarbons.
Designed to handle strong chemicals at lower bolt loads
Klingersil C-7400
Excellent choice for alkalis & acid resistance
Klingersil C-8200
Excellent stability at high temperatures
Klinger Thermica
www.robco.comGasket and Rubber
Compressibility8%
Recovery50% min.
Creep Relaxation20%
Thickness Decrease@Compression 7251 psi @73ºF 12%
@572ºF 11%
Thickness Increase after immersion in ASTM Oil 1 10%
ASTM Fuel B 10%
Density112 lb/ft³
Sealability<0.20 ml/hr
Compressibility7%
Recovery50% min.
Creep Relaxation25%
Thickness Decrease@Compression 7251 psi @73ºF 9%
@572ºF 5%
Thickness Increase after immersion in ASTM Oil 1 15%
ASTM Fuel B 5-20%
Density94 lb/ft³
Sealability<0.30 ml/hr
Compressibility9%
Recovery50% min.
Creep Relaxation30%
Thickness Decrease@Compression 7251 psi @73ºF 7%
@572ºF 17%
Thickness Increase after immersion in ASTM Oil 1 5%
ASTM Fuel B 10%
Density106 lb/ft³
Sealability<0.30 ml/hr
Compressibility12%
Recovery55% min.
Creep RelaxationNA
Thickness Decrease@Compression 7251 psi @73ºF 17%
@572ºF 13%
Thickness Increase after immersion in ASTM Oil IRM 8%
ASTM Fuel B NA
DensityNA
SealabilityNA
Klingersil®, Top-Sil® and Thermica®are trademarks of Klinger Group
60”L x 60”W 1/64“ - 1/8”
60”L x 60”W 1/64“ - 1/8”
60”L x 60”W 1/64“ - 1/8”
78”L x 59”W 1/32“ - 1/8”
Robco SC-42Medium density, Closed-Cell Sponge SC-42 is a PVC/NBR/Neoprene elastomeric sponge mate-rial, ideal for gaskets, weather stripping as well as sound and vibration damping. Available in extruded pro�les, sheet or strips with or without pressure sensitive adhesive (PSA) backing. For gaskets, stripping, sound and vibration damping
Robco SC-42Temperature Range
-20ºF - 180ºF Compression Set
25% Max.Density
6 - 8 lb/ft³Tear Strength
15 lb/inTensile Strength
75 psi Min.Elongation100% Min.
Heat Aging:CDNA
Comp. Deflection @ 25%5psi Min. - 9psi Max.
Water AbsorptionNA
Shore 00 35-50 ASTM D10562B2 B23
48”W 1/8” - 1”
For gaskets, stripping, sound and vibration damping
Robco SC-43Robco SC-43Firm density, Closed-Cell Sponge SC-43 is a PVC/NBR/Neoprene elastomeric sponge material, suitable for gaskets, weather stripping as well as sound and vibration damping. Available in extruded pro�les, sheet or strips with or without pressure sensi-tive adhesive (PSA) backing.
Robco White SiliconeStability at high temperaturesPremium quality material used where highly compress-ible gaskets are required at temperatures up to 500ºF. The cellular structure is produced without the use of CFCs resulting in less damage to the environment.
Robco Microcellular UrethaneSuperior Foam/SpongeO�ers enhanced recovery over other types of foam and sponge, resulting in a superior seal, particularly in low seat stress applications. This material exhibits resistance to UV exposure, ozone and is environmentally safe and clean. An excellent choice for seals, gaskets and spacers used in electronic equipment.
Robco 100NNeoprene and CorkAn extremely durable medium grade neoprene and cork material with superior tensile and tear strength; highly oil resistant. Ideal for transformer sealing applications.
Pro�le extrusions, sheeting, jointed rings, punched forms
Robco White Silicone
Perfect choice for vibration & impact damping
Robco Microcellular Urethane
#1 choice for transformers
Robco 100N
Temperature Range-40ºF - 200ºF
Compression Set30% Max.
Density9 lb/ft³
Max. Hardness60 Duro
Tensile Strength71 psi Min.
Elongation150 %
Heat Aging:CD±30%
Comp. Deflection @ 25%9psi Min. - 13psi Max.
Water Absorption5% by/wt Max.
ASTM D10562A3Shore 00 60
Temperature Range-67ºF - 500ºF
Compression Set25% Max.
Density0.02 lb/ft³
Max. HardnessNA
Tensile Strength90 psi Min.
Elongation200 %
Heat Aging:CDNA
Comp. Deflection @ 25%6psi Min. - 14psi Max.
Water Absorption5% by/wt Max.
Temperature Range-40ºF - 194ºF
Compression Set5% Max.
Density17 lb/ft³
Max. Hardness12 Duro
Tensile Strength40 psi Min.
Elongation100 %
Heat Aging:CDNA
Comp. Deflection @ 25%NA
Water AbsorptionNA
Shore O 12
Compression Set60% Max.
Recovery75% min.
Thickness Increase after immersion in ASTM Oil 1 10%
ASTM Fuel A 15%
Density45 lb/ft³Flexibility
2 Max. (Factor)Tensile Strength
250 psiMax. Hardness
70 Duro
Shore A 50 - 70
Max. Comp. @ 400psi35%
3
3
3Available in soft, medium and �rm density.
36”L x 36”W 1/32“ - 1/4”
72”L x 42”W 1/8” - 1”
54”W 1/32 - 1/2”
36”L x 24”W 1/16” - 1/2”
COM
PRES
SED
MAT
ERIA
L
Robco Milam PSSReinforced Mica Sealing MaterialMilam-PSS is an asbestos free mica based sealing material reinforced with a stainless steel tanged insert. Speci�cally designed for hot, dry gas applications. The outstanding chemical resistance of mica also makes the gasket suitable for a wide range of other applications.
Good for exhaust manifolds, turbines, turbo chargers, and air heat exchangers.
Robco Milam PSSCompressibility
15% - 23%Recovery
40% - 50% min.Stress Relaxation
50MPa/300ºC 5801psi
Int. Pressure29 psi
Gas Leakage>100 ml/min
Min. Temp.NA
Max. Temp.1472ºF - 1832ºF
Stress11602 - 14503 psi
Stress Relaxation2600 - 4641psi
47”L x 40”W 0.051“ min.
40MPa/300ºC
MIC
A L
AM
INAT
ES
SPO
NG
E RU
BBER
MAT
ERIA
LSCO
RK/ R
UBB
ER
UV
UV
UV
UV
Top-Chem-2000 is �re-safe according to API 6FA and ISO 10497 as well as TA-Luft (Clean Air) approval
www.robco.comGasket and Rubber
KLINGER Top-Chem-2000Fire-Safe and Chemically Resistant PTFEHeavy-duty modi�ed PTFE material manufactured with the addition of silicon carbide to improve the mechanical prop-erties of the PTFE based material. Greatly increased compres-sive strength and resistance to creep while maintaining excellent chemical resistance. Used in food, pharmaceutical and chemically aggressive applications.
KLINGER Top-Chem-2003Resilient at Low Bolt Load PTFE Modi�ed PTFE designed for use in low gasket load applications. Glass microspheres aid compressibility and general mechanical strength Developed for use with glass-lined �anges and other situations where compressive load is limited.
KLINGER Top-Chem-2005PTFE for Strong AcidsTop-Chem-2005 is a modi�ed PTFE optimized for use in acidic applications. The addition of glass improves mechanical properties of the PTFE and increases opera-tional range of PTFE based materials. Not recom-mended with strong alkalis.
KLINGER Top-Chem-2006PTFE for Strong AlkaliesTop-Chem-2006 is a modi�ed PTFE optimized for use in alkaline applications. The addition of barium sulfate improves mechanical properties of the PTFE and increases operational range of PTFE based materials. Not recom-mended with strong acids.
Top-Chem-2003 can be used for food, pharmaceutical, and chemically aggressive applications. Top-Chem-2003 has TA-Luft (Clean Air) approval
Klinger Top-Chem-2003
Top-Chem-2005 has TA-Luft (Clean Air) approval
Klinger Top-Chem-2005
Top-Chem-2006 has TA-Luft (Clean Air) approval.
Klinger Top-Chem-2006
www.robco.comGasket and Rubber
Robco 5700Neoprene & Nylon DiaphramA premium quality sheet made from high grade neoprene reinforced with nylon fabric. Robco 5700 is recommended for use where neoprene's physical and chemical properties in combination with nylon's strength are required.
Premium diaphragm Material
Robco 5700Compressibility
2%Recovery55% min.
Creep RelaxationNA
Thickness Decrease@Compression 7251 psi @75ºF 2%
@480ºF 5%
Thickness Increase after immersion in Sulfuric Acid 1%
Nitric Acid 2%
Density156 lb/ft³
Sealability<0.5 ml/min
Compressibility18%
Recovery40% min.
Creep RelaxationNA
Thickness Decrease@Compression 3625 psi @75ºF 9%
@480ºF 38%
Thickness Increase after immersion in Sulfuric Acid 1%
Nitric Acid 5%
Density106 lb/ft³
Sealability<0.1 ml/min
Compressibility7%
Recovery35% min.
Creep RelaxationNA
Thickness Decrease@Compression 7251 psi @75ºF 10%
@480ºF 30%
Thickness Increase after immersion in Sulfuric Acid 2%
Nitric Acid 7%
Density125 lb/ft³
Sealability<0.2 ml/min
Compressibility4%
Recovery40% min.
Creep RelaxationNA
Thickness Decrease@Compression 7251 psi @75ºF 10%
@480ºF 40%
Thickness Increase after immersion in Sulfuric Acid NA
Nitric Acid 7%
Density181 lb/ft³
Sealability<0.1 ml/min
Temperature Range-31ºF - 212ºF
Compression Set35% Max.
Specific Gravity88 lb/ft³
Max. Hardness70 Duro
Tensile Strength1400 psi Min.
Elongation250% Min.
Heat Aging:Hardness+15 points Max.
Heat Aging:Tensile-15% Max.
Heat Aging:Elongation-40% Max.
ASTM D20002BC714A14B14EO14EO34Shore A 702
3
2
2
2
TopChem® and Soft-Chem® are trademarks of Klinger Group
60”L x 60”W 0.040“ - 1/8”
60”L x 60”W 0.040“ - 1/8”
60”L x 60”W 0.040“ - 1/8”
60”L x 60”W 1/16“ - 1/8”
54”W 1/16” - 1/4”
Klinger Top-Chem-2000
KLINGER Soft-ChemHighly Compressible Expanded PTFEA pure, expanded PTFE material designed for use in low bolt load applications. O�ers improved compressive strength and improved creep resistance. Soft-Chem is suitable for use in food and pharmaceutical duties and can be used in glass-lined, plastic and steel �anges. Softest sheet for non-metallic �anges handling chemicals
Compressibility60%
Recovery12% min.
Creep Relaxation35%
Thickness Decrease @572ºF 28.6%
Thickness Increase @3625 psi 37%
Density53.1 lb/ft³
Sealability<0.002 ml/hr
2 60”L x 60”W 0.020“ - 0.240”
Klinger Soft-Chem
Economical diaphragm
Robco 5717
Robco 5717Neoprene & Polyester DiaphragmMade from high grade neoprene reinforced with poly-ester fabric. A superior quality diaphragm material with high burst strength and �exibility. Recommended for applications that require the �exibility of polyester and good oil resistance.
Robco 602Closed-Cell Neoprene SpongeSoft density neoprene, closed-cell sponge material for gaskets, weather stripping as well as sound and vibra-tion damping. This product is available in extruded pro�les, sheet or strips with or without pressure sensi-tive adhesive (PSA) backing.
Robco 1523General Purpose Open-Cell SpongeA natural open-cell sponge rubber with excellent abra-sion resistance, compressibility and good dry sealing properties. Readily absorbs liquids and gases. Available in sheets, strips or die cut parts with or without adhe-sive backing.
Robco SC-41Soft Density, Closed-Cell SpongeSC-41 is a PVC/NBR/Neoprene elastomeric sponge with moderate compression-de�ection and �ne cell structure. Meets required speci�cations for automotive, truck and appliance gasketing applications. Available with Pressure Sensitive Adhesives (PSA).
For gaskets, stripping, sound and vibration damping
Robco 602
Excellent abrasion resistance and compressibility properties
Robco 1523
Appropriate for automotive, truck and appliance gasketing
Robco SC-41
Temperature Range-22ºF - 212ºF
Compression Set35% Max.
Specific Gravity97 lb/ft³
Max. Hardness70 Duro
Tensile Strength1400 psi Min.
Elongation250% Min.
Heat Aging:Hardness+15 points Max.
Heat Aging:Tensile-15% Max.
Heat Aging:Elongation-40% Max.
ASTM D20002BC714A14B14EO14EO34Shore A 70
Temperature Range-40ºF - 150ºF
Compression Set25% Max.
Density7 - 11 lb/ft³
Tear Strength14 lb/in
Tensile Strength90 psi Min.
Elongation150% Min.
Heat Aging:CD±30%
Comp. Deflection @ 25%5 psi Min. - 9 psi Max.
Water Absorption5% Max.
ASTM D1056-072C2
Temperature Range-20ºF - 180ºF
Compression Set25% Max.
Density3.5 - 5.0 lb/ft³
C-Tear Strength10 lb/in Min.
Tensile Strength50 psi Min.
Elongation75% Min.
Heat Aging:CDNA
Comp. Deflection @ 25%2 psi Min. - 5 psi
Water AbsorptionNA
Temperature Range-20ºF - 160ºF
Compression Set15% Max.
Density26 lb/ft³
Max. Hardness45 Duro ±10
Tensile StrengthNA
ElongationNA
Heat Aging:CD±20%
Comp. Deflection @ 25%5 psi Min. - 10 psi Max.
Water AbsorptionNA
Shore 00 20-40 ASTM D10562B1 B2
3
3
3
48”W 1/16” - 1/4”
54”W 1/8” - 1”
48”W 1/8” - 1”
54”W 1/8” - 1”
PTFE
BA
SED
MAT
ERIA
LS
RUBB
ER M
ATER
IALS
SPO
NG
E RU
BBER
MAT
ERIA
LS
Vaccum - full pressure3000 psi
Gas leakage0.12 ml/min.
Shore 00 35-45
UV
www.robco.comGasket and Rubber
Robco EPP-60Peroxide-Cured EPDMRobco EPP-60 peroxide-cured EPDM is an economical alternative to Viton®, PTFE and silicone in certain applica-tions involving chemicals at elevated temperatures.
Acid resistant
Robco EPP-60
Ideal choice for a wide range of industries
www.robco.comGasket and RubberRobchem CF-500
Robchem CF-500PTFE Reinforced with Glass - UniversalCF-500 o�ers excellent chemical resistance, reduced creep, anti-stick performance and low material poros-ity. Ideal choice for various industries including pulp & paper, aerospace, petrochemical, steel, power genera-tion, pharmaceutical. etc.
Robchem CF-504PTFE Reinforced with Glass - Low TorqueA highly compressible PTFE material reinforced with glass �ber and glass microspheres making it suitable for low bolt load applications. CF-504 has excellent chemical resistance, reduced cold �ow and good anti- stick performance.
Robchem CF-510 PTFE Reinforced with Glass - Strong ChemicalsA PTFE based material reinforced with glass �ber, CF-510 exhibits ultra low deformation characteristics, excellent chemical resistance, reduced cold �ow and good anti-stick performance. An ideal choice for use with sodium hydroxide.
Robco SealonPTFE and Glass - Premium GradeThis premium grade material is a blend of pure PTFE and glass �ber produced to your size requirements. Provides increased resistance to wear, and deformation under load and low coe�-cient of thermal expansion.
Suitable for low bolt load applications
Robchem CF-504
Excellent chemical resistance
Robchem CF-510
Filled PTFE for general applications
Robco Sealon
Compressibility4%
Recovery44% min.
Creep Relaxation6%
Tensile Strength2660 psi
Max. Pressure1200 psi
Min. Temp.-450ºF
Max. Temp.500ºF
Specific Gravity2.3
Sealability<0.009 ml/min
Shore D2 61
Compressibility25%
Recovery30% min.
Creep Relaxation30%
Tensile Strength2100 psi
Max. Pressure800 psi
Min. Temp.-450ºF
Max. Temp.500ºF
Specific Gravity2.1
Sealability<0.007 ml/min
Shore D2 57
Shore D2 61
Compressibility4%
Recovery50% min.
Creep Relaxation6%
Tensile Strength2307 psi
Max. Pressure1200 psi
Min. Temp.-450ºF
Max. Temp.500ºF
Specific Gravity2.02
Sealability<0.007 ml/min
CompressibilityNA
RecoveryNA.
Creep RelaxationNA
Tensile Strength2500 psi
Elongation200%
Min. Temp.-450ºF
Max. Temp.500ºF
Specific Gravity2.24
SealabilityNA
Shore D 63
Temperature Range-55ºF - 300ºF
Compression SetNA
Specific GravityNA
Max. Hardness60 Duro
Tensile Strength1800 psi Min.
Elongation400% Min.
Heat Aging:HardnessNA
Heat Aging:TensileNA
Heat Aging:ElongationNA
ASTM D2000M4CA610A25C32EA14F19Shore 60 60”L x 60”W 0.015“ - 0.375”
48”L x 48”W 1/16“ - 1/8”
60”L x 60”W 0.015“ - 0.375”
60”L x 60”W 0.015“ - 0.375”
36”- 48”W 1/16” - 1/4”
Resistance to strong chemicals and solvents
Robco Virgin PTFERobco Virgin PTFEPure PTFE SheetA premium grade material recommended for applications requiring high dielectric strength and resistance to strong chemicals and solvents. Virgin PTFE exhibits the lowest coe�-cient of friction of all materials. Available in continuous length skived tape.
CompressibilityNA
Elongation200%
Creep RelaxationNA
Tensile Strength3000 psi
Max. PressureNA
Min. Temp.-400ºF
Max. Temp.500ºF
Specific Gravity2.16
SealabilityNA
48”L x 48”W 1/32“ - 1/4”
Soft material for high temperature applications
Robco SI-60Robco SI-60Grey/Red/White SiliconeIdeal where low bolt load is necessary and high temperature resistance is required. Resistant to moderate chemicals, ozone, UV. Also available in FDA grade material for high temperature food and pharmaceutical applications.
Robco VI-75Viton®Robco VI-75 Viton is made from 100% Dupont Perfor-mance Elastomer FKM polymer. Resistant to all aromatic, aliphatic and halogenated hydrocarbons plus many acids as well as animal and vegetable oils.
Robco 423-SBR-CICloth InsertedRobco 423 CI standard cloth inserted sheet is made from SBR reinforced with polyester fabric. More tear resistant than homogenous rubber, Robco 423 CI is suitable for low pressure saturated steam, hot or cold water, air and gas applications.
Robco 2919Neoprene Coated PolyesterA very thin, lightweight material used to make protective boots/bellows and protective covers. Robco 2919 makes a far more durable cover than any other type of weather resistant product.
Soft resilient material with high chemical resistance
Robco VI-75
General purpose / high tensile
Robco 423-CI
For fabrication purposes
Robco 2919
Viton®is a registered trademark of DuPont Performance Elastomers L.L.C..
Temperature Range-80ºF - 450ºF
Tear Resistance80 ppi
Specific Gravity90.5 lb/ft³
Max. Hardness60 Duro
Tensile Strength600 psi Min.
Elongation300% Min.
Heat Aging:HardnessNA
Heat Aging:TensileNA
Heat Aging:ElongationNA
Shore A 60
Temperature Range-13ºF - 392ºF
Compression SetNA
Specific Gravity120 lb/ft³
Max. Hardness75 Duro
Tensile Strength1200 psi Min.
Elongation250% Min.
Heat Aging:HardnessNA
Heat Aging:TensileNA
Heat Aging:ElongationNA
Shore A 75
Temperature Range-20ºF - 180ºF
Compression Set50% Max.
Specific Gravity94 lb/ft³
Max. Hardness80 Duro
Tensile Strength500 psi Min.
Elongation100% Min.
Heat Aging:Hardness±15 points Max.
Heat Aging:Tensile±30% Max.
Heat Aging:Elongation-50% Max.
ASTM D20001AA805Shore 80
Temperature Range-40ºF - NA
Tearing Strength40 - 90 lbs
Specific Gravity11 lb/ft³
Max. HardnessNA
Breaking Strength360 - 640 lbs
Elongation100% Min.
Heat Aging:HardnessNA
Heat Aging:TensileNA
Heat Aging:ElongationNA
3
3
3
36”W 1/16” - 1/4”
36”W 1/32” - 1/4”
36”W - 48”W 1/16” - 1/4”
60”W 0.020” min.
PTFE
BA
SED
MAT
ERIA
LS
RUBB
ER M
ATER
IALS
Shore D 54
UV
UV
UV
First choice for moderate applications
Robco 467Robco 467Polychloroprene (Neoprene) - 70 DuroGood inherent resistance to fungus, �ame, weather, ozone and natural aging; moderate resistance to oil and gasoline; good resistance to alkalis and acids. Applications include gaskets and washers for industrial processes and seals for doors and windows.
Robco 9370White NitrileRobco 9370 is a powder-free white nitrile that has excel-lent resistance to petroleum-based hydraulic �uids and good resistance to acids and alkalis. This FDA grade material is recommended for service in pharmaceuticals, food industry and other purity sensitive applications.
Robco 9863NitrileRobco 9863 Nitrile has very good resistance to oil and gasoline; superior resistance to petroleum-based hydraulic �uids; good resistance to hydrocarbon solvents; good resistance to alkalis and acids. Ideal for applications where oil resistance is imperative.
Robco EP-60EPDMExcellent resistance to heat, ozone, sunlight. Good low temperature �exibility; superior resistance to water and steam; good resistance to alkalis, acids and oxygenated solvents. Besides gaskets, applications include any type of weather stripping. Avoid contact with hydrocarbon �uids.
Meets FDA requirements for common applications
Robco 9370
First choice for contact with hydrocarbons
Robco 9863
Good acid and weather resistance
Robco EP-60
www.robco.comGasket and Rubber
Robco JointexShapeable PTFEThick tape formed with an adhesive backing for universal instal-lation. O�ers the unique properties of expanded PTFE to create an e�ective seal at low bolt loads and conform to �ange imper-fections. Jointex does not support bacterial growth or cause product contamination: FDA compliant.
Easy installation and outstanding chemical resistance
Robco JointexLow Temperature
-321ºF Max. Pressure
2000 psiHigh Temperature
500ºF
www.robco.comGasket and Rubber
Robco 466Polychloroprene (Neoprene) - 60 Duro Good inherent resistance to fungus, �ame, weather, ozone and natural aging; moderate resistance to oil and gasoline; good resistance to alkalis and acids. Applications include gaskets and washers for industrial processes and seals for doors and windows. First choice for moderate applications
Robco 466Temperature Range
-22ºF - 200ºF Compression Set
80% Max.Specific Gravity
82 lb/ft³Max. Hardness
60 DuroTensile Strength
1000 psi Min.Elongation300% Min.
Heat Aging:Hardness±15 points Max.
Heat Aging:Tensile±30% Max.
Heat Aging:Elongation-50% Max.
Shore A 60 ASTM D20001BC610
Temperature Range-22ºF - 200ºF
Compression Set80% Max.
Specific Gravity82 lb/ft³
Max. Hardness70 Duro
Tensile Strength1000 psi Min.
Elongation200% Min.
Heat Aging:Hardness±15 points Max.
Heat Aging:Tensile±30% Max.
Heat Aging:Elongation-50% Max.
ASTM D20001BC710Shore 70
Temperature Range-40ºF - 200ºF
Compression Set50% Max.
Specific Gravity87 lb/ft³
Max. Hardness60 Duro
Tensile Strength1000 psi Min.
Elongation300% Min.
Heat Aging:Hardness±15 points Max.
Heat Aging:Tensile±30% Max.
Heat Aging:Elongation-50% Max.
ASTM D20001BF610Shore 60
Temperature Range-40ºF - 200ºF
Compression Set25% Max.
Specific Gravity72 lb/ft³
Max. Hardness60 Duro
Tensile Strength2500 psi Min.
Elongation350% Min.
Heat Aging:Hardness±15 points Max.
Heat Aging:Tensile±30% Max.
Heat Aging:Elongation-50% Max.
ASTM D20002BG625B14EA14EF11EF21E014E034
Shore 60
Temperature Range-40ºF - 250ºF
Compression Set50% Max.
Specific Gravity75 lb/ft³
Max. Hardness60 Duro
Tensile Strength800 psi Min.
Elongation300% Min.
Heat Aging:Hardness+10 points Max.
Heat Aging:Tensile-25% Max.
Heat Aging:Elongation-25% Max.
ASTM D20003BA608A14C12F17Shore 60
3
3
3
1/8“ 3/16” 1/4“ 3/8” 1/2“ 5/8” 3/4“ 3/4” 1”
1000’ 750’ 500’ 250’ 150’ 150’ 100’ 90’ 75’ 48”W 1/32” - 1”
48”W 1/16” - 1/4”
48”W 1/16” - 1/4”
48”W 1/16” - 1/4”
48”W 1/16” - 1/4”
100’ 75’ 50’ 25’ 15’ 15’ 15’ 15’ 15’
Low cost material for basic applications
Robco 435FRobco 435FRed RubberRobco 435 red rubber is an SBR-based fabric-�nished, composition rubber sheet. A general purpose plant maintenance material recommended for air, hot or cold water and low pressure saturated steam applications.
Robco 460Natural Pure Gum RubberRobco 460 Pure Gum, or natural rubber, has superior resistance to tear and abrasion, �exibility at low temperatures, high tensile strength and excellent resiliency. Applications include chute linings, low temperature belting, cemented sleeves, etc. High resiliency at low temperature
Robco 460Temperature Range
-22ºF - 185ºF Compression Set
50% Max.Specific Gravity
66 lb/ft³Max. Hardness
40 DuroTensile Strength
2500 psi Min.Elongation400% Min.
Heat Aging:Hardness±15 points Max.
Heat Aging:Tensile±30% Max.
Heat Aging:Elongation-50% Max.
Shore 75
Temperature Range-22ºF - 180ºF
Compression Set50% Max.
Specific Gravity112 lb/ft³
Max. Hardness75 Duro
Tensile Strength600 psi Min.
Elongation100% Min.
Heat Aging:Hardness±15 points Max.
Heat Aging:Tensile±30% Max.
Heat Aging:Elongation-50% Max.
Shore A 40 ASTM D20002AA425A13F17
ASTM D2000 1AA806Z1
336”W - 48”W 1/16“ - 1/4”
48”W 1/16” - 1”
Robco 464Black SBRRobco 464 is a general purpose SBR sheet with good abrasion resistance, impact strength, resilience and �exibility at low temperatures. Suitable for scrapers, conveyor skirtboards, blast mats and other abrasive applications.
Robco 465Polychloroprene (Neoprene) - 50 DuroGood inherent resistance to fungus, �ame, weather, ozone and natural aging; moderate resistance to oil and gasoline; good resistance to alkalis and acids. Applications include gaskets and washers for industrial processes and seals for doors and windows.
Low cost general purpose
Robco 464
First choice for moderate applications
Robco 465
Temperature Range-22ºF - 180ºF
Compression Set80% Max.
Specific GravityNA
Max. Hardness60 Duro
Tensile Strength500 psi Min.
Elongation300% Min.
Heat Aging:HardnessNA
Heat Aging:TensileNA
Heat Aging:ElongationNA
Shore A 60
Temperature Range-22ºF - 200ºF
Compression Set80% Max.
Specific Gravity77 lb/ft³
Max. Hardness50 Duro
Tensile Strength1000 psi Min.
Elongation300% Min.
Heat Aging:Hardness±15 points Max.
Heat Aging:Tensile±15% Max.
Heat Aging:Elongation-50% Max.
ASTM D20001BC510Shore A 50
3
3
48”W 1/16” - 1/2”
48”W 1/16” - 1/4”
RUBB
ER M
ATER
IALS
PTFE
BAS
ED M
ATER
IALS
RUBB
ER M
ATER
IALS
UV
UV
UV
First choice for moderate applications
Robco 467Robco 467Polychloroprene (Neoprene) - 70 DuroGood inherent resistance to fungus, �ame, weather, ozone and natural aging; moderate resistance to oil and gasoline; good resistance to alkalis and acids. Applications include gaskets and washers for industrial processes and seals for doors and windows.
Robco 9370White NitrileRobco 9370 is a powder-free white nitrile that has excel-lent resistance to petroleum-based hydraulic �uids and good resistance to acids and alkalis. This FDA grade material is recommended for service in pharmaceuticals, food industry and other purity sensitive applications.
Robco 9863NitrileRobco 9863 Nitrile has very good resistance to oil and gasoline; superior resistance to petroleum-based hydraulic �uids; good resistance to hydrocarbon solvents; good resistance to alkalis and acids. Ideal for applications where oil resistance is imperative.
Robco EP-60EPDMExcellent resistance to heat, ozone, sunlight. Good low temperature �exibility; superior resistance to water and steam; good resistance to alkalis, acids and oxygenated solvents. Besides gaskets, applications include any type of weather stripping. Avoid contact with hydrocarbon �uids.
Meets FDA requirements for common applications
Robco 9370
First choice for contact with hydrocarbons
Robco 9863
Good acid and weather resistance
Robco EP-60
www.robco.comGasket and Rubber
Robco JointexShapeable PTFEThick tape formed with an adhesive backing for universal instal-lation. O�ers the unique properties of expanded PTFE to create an e�ective seal at low bolt loads and conform to �ange imper-fections. Jointex does not support bacterial growth or cause product contamination: FDA compliant.
Easy installation and outstanding chemical resistance
Robco JointexLow Temperature
-321ºF Max. Pressure
2000 psiHigh Temperature
500ºF
www.robco.comGasket and Rubber
Robco 466Polychloroprene (Neoprene) - 60 Duro Good inherent resistance to fungus, �ame, weather, ozone and natural aging; moderate resistance to oil and gasoline; good resistance to alkalis and acids. Applications include gaskets and washers for industrial processes and seals for doors and windows. First choice for moderate applications
Robco 466Temperature Range
-22ºF - 200ºF Compression Set
80% Max.Specific Gravity
82 lb/ft³Max. Hardness
60 DuroTensile Strength
1000 psi Min.Elongation300% Min.
Heat Aging:Hardness±15 points Max.
Heat Aging:Tensile±30% Max.
Heat Aging:Elongation-50% Max.
Shore A 60 ASTM D20001BC610
Temperature Range-22ºF - 200ºF
Compression Set80% Max.
Specific Gravity82 lb/ft³
Max. Hardness70 Duro
Tensile Strength1000 psi Min.
Elongation200% Min.
Heat Aging:Hardness±15 points Max.
Heat Aging:Tensile±30% Max.
Heat Aging:Elongation-50% Max.
ASTM D20001BC710Shore 70
Temperature Range-40ºF - 200ºF
Compression Set50% Max.
Specific Gravity87 lb/ft³
Max. Hardness60 Duro
Tensile Strength1000 psi Min.
Elongation300% Min.
Heat Aging:Hardness±15 points Max.
Heat Aging:Tensile±30% Max.
Heat Aging:Elongation-50% Max.
ASTM D20001BF610Shore 60
Temperature Range-40ºF - 200ºF
Compression Set25% Max.
Specific Gravity72 lb/ft³
Max. Hardness60 Duro
Tensile Strength2500 psi Min.
Elongation350% Min.
Heat Aging:Hardness±15 points Max.
Heat Aging:Tensile±30% Max.
Heat Aging:Elongation-50% Max.
ASTM D20002BG625B14EA14EF11EF21E014E034
Shore 60
Temperature Range-40ºF - 250ºF
Compression Set50% Max.
Specific Gravity75 lb/ft³
Max. Hardness60 Duro
Tensile Strength800 psi Min.
Elongation300% Min.
Heat Aging:Hardness+10 points Max.
Heat Aging:Tensile-25% Max.
Heat Aging:Elongation-25% Max.
ASTM D20003BA608A14C12F17Shore 60
3
3
3
1/8“ 3/16” 1/4“ 3/8” 1/2“ 5/8” 3/4“ 3/4” 1”
1000’ 750’ 500’ 250’ 150’ 150’ 100’ 90’ 75’ 48”W 1/32” - 1”
48”W 1/16” - 1/4”
48”W 1/16” - 1/4”
48”W 1/16” - 1/4”
48”W 1/16” - 1/4”
100’ 75’ 50’ 25’ 15’ 15’ 15’ 15’ 15’
Low cost material for basic applications
Robco 435FRobco 435FRed RubberRobco 435 red rubber is an SBR-based fabric-�nished, composition rubber sheet. A general purpose plant maintenance material recommended for air, hot or cold water and low pressure saturated steam applications.
Robco 460Natural Pure Gum RubberRobco 460 Pure Gum, or natural rubber, has superior resistance to tear and abrasion, �exibility at low temperatures, high tensile strength and excellent resiliency. Applications include chute linings, low temperature belting, cemented sleeves, etc. High resiliency at low temperature
Robco 460Temperature Range
-22ºF - 185ºF Compression Set
50% Max.Specific Gravity
66 lb/ft³Max. Hardness
40 DuroTensile Strength
2500 psi Min.Elongation400% Min.
Heat Aging:Hardness±15 points Max.
Heat Aging:Tensile±30% Max.
Heat Aging:Elongation-50% Max.
Shore 75
Temperature Range-22ºF - 180ºF
Compression Set50% Max.
Specific Gravity112 lb/ft³
Max. Hardness75 Duro
Tensile Strength600 psi Min.
Elongation100% Min.
Heat Aging:Hardness±15 points Max.
Heat Aging:Tensile±30% Max.
Heat Aging:Elongation-50% Max.
Shore A 40 ASTM D20002AA425A13F17
ASTM D2000 1AA806Z1
336”W - 48”W 1/16“ - 1/4”
48”W 1/16” - 1”
Robco 464Black SBRRobco 464 is a general purpose SBR sheet with good abrasion resistance, impact strength, resilience and �exibility at low temperatures. Suitable for scrapers, conveyor skirtboards, blast mats and other abrasive applications.
Robco 465Polychloroprene (Neoprene) - 50 DuroGood inherent resistance to fungus, �ame, weather, ozone and natural aging; moderate resistance to oil and gasoline; good resistance to alkalis and acids. Applications include gaskets and washers for industrial processes and seals for doors and windows.
Low cost general purpose
Robco 464
First choice for moderate applications
Robco 465
Temperature Range-22ºF - 180ºF
Compression Set80% Max.
Specific GravityNA
Max. Hardness60 Duro
Tensile Strength500 psi Min.
Elongation300% Min.
Heat Aging:HardnessNA
Heat Aging:TensileNA
Heat Aging:ElongationNA
Shore A 60
Temperature Range-22ºF - 200ºF
Compression Set80% Max.
Specific Gravity77 lb/ft³
Max. Hardness50 Duro
Tensile Strength1000 psi Min.
Elongation300% Min.
Heat Aging:Hardness±15 points Max.
Heat Aging:Tensile±15% Max.
Heat Aging:Elongation-50% Max.
ASTM D20001BC510Shore A 50
3
3
48”W 1/16” - 1/2”
48”W 1/16” - 1/4”
RUBB
ER M
ATER
IALS
PTFE
BAS
ED M
ATER
IALS
RUBB
ER M
ATER
IALS
UV
UV
UV
www.robco.comGasket and Rubber
Robco EPP-60Peroxide-Cured EPDMRobco EPP-60 peroxide-cured EPDM is an economical alternative to Viton®, PTFE and silicone in certain applica-tions involving chemicals at elevated temperatures.
Acid resistant
Robco EPP-60
Ideal choice for a wide range of industries
www.robco.comGasket and RubberRobchem CF-500
Robchem CF-500PTFE Reinforced with Glass - UniversalCF-500 o�ers excellent chemical resistance, reduced creep, anti-stick performance and low material poros-ity. Ideal choice for various industries including pulp & paper, aerospace, petrochemical, steel, power genera-tion, pharmaceutical. etc.
Robchem CF-504PTFE Reinforced with Glass - Low TorqueA highly compressible PTFE material reinforced with glass �ber and glass microspheres making it suitable for low bolt load applications. CF-504 has excellent chemical resistance, reduced cold �ow and good anti- stick performance.
Robchem CF-510 PTFE Reinforced with Glass - Strong ChemicalsA PTFE based material reinforced with glass �ber, CF-510 exhibits ultra low deformation characteristics, excellent chemical resistance, reduced cold �ow and good anti-stick performance. An ideal choice for use with sodium hydroxide.
Robco SealonPTFE and Glass - Premium GradeThis premium grade material is a blend of pure PTFE and glass �ber produced to your size requirements. Provides increased resistance to wear, and deformation under load and low coe�-cient of thermal expansion.
Suitable for low bolt load applications
Robchem CF-504
Excellent chemical resistance
Robchem CF-510
Filled PTFE for general applications
Robco Sealon
Compressibility4%
Recovery44% min.
Creep Relaxation6%
Tensile Strength2660 psi
Max. Pressure1200 psi
Min. Temp.-450ºF
Max. Temp.500ºF
Specific Gravity2.3
Sealability<0.009 ml/min
Shore D2 61
Compressibility25%
Recovery30% min.
Creep Relaxation30%
Tensile Strength2100 psi
Max. Pressure800 psi
Min. Temp.-450ºF
Max. Temp.500ºF
Specific Gravity2.1
Sealability<0.007 ml/min
Shore D2 57
Shore D2 61
Compressibility4%
Recovery50% min.
Creep Relaxation6%
Tensile Strength2307 psi
Max. Pressure1200 psi
Min. Temp.-450ºF
Max. Temp.500ºF
Specific Gravity2.02
Sealability<0.007 ml/min
CompressibilityNA
RecoveryNA.
Creep RelaxationNA
Tensile Strength2500 psi
Elongation200%
Min. Temp.-450ºF
Max. Temp.500ºF
Specific Gravity2.24
SealabilityNA
Shore D 63
Temperature Range-55ºF - 300ºF
Compression SetNA
Specific GravityNA
Max. Hardness60 Duro
Tensile Strength1800 psi Min.
Elongation400% Min.
Heat Aging:HardnessNA
Heat Aging:TensileNA
Heat Aging:ElongationNA
ASTM D2000M4CA610A25C32EA14F19Shore 60 60”L x 60”W 0.015“ - 0.375”
48”L x 48”W 1/16“ - 1/8”
60”L x 60”W 0.015“ - 0.375”
60”L x 60”W 0.015“ - 0.375”
36”- 48”W 1/16” - 1/4”
Resistance to strong chemicals and solvents
Robco Virgin PTFERobco Virgin PTFEPure PTFE SheetA premium grade material recommended for applications requiring high dielectric strength and resistance to strong chemicals and solvents. Virgin PTFE exhibits the lowest coe�-cient of friction of all materials. Available in continuous length skived tape.
CompressibilityNA
Elongation200%
Creep RelaxationNA
Tensile Strength3000 psi
Max. PressureNA
Min. Temp.-400ºF
Max. Temp.500ºF
Specific Gravity2.16
SealabilityNA
48”L x 48”W 1/32“ - 1/4”
Soft material for high temperature applications
Robco SI-60Robco SI-60Grey/Red/White SiliconeIdeal where low bolt load is necessary and high temperature resistance is required. Resistant to moderate chemicals, ozone, UV. Also available in FDA grade material for high temperature food and pharmaceutical applications.
Robco VI-75Viton®Robco VI-75 Viton is made from 100% Dupont Perfor-mance Elastomer FKM polymer. Resistant to all aromatic, aliphatic and halogenated hydrocarbons plus many acids as well as animal and vegetable oils.
Robco 423-SBR-CICloth InsertedRobco 423 CI standard cloth inserted sheet is made from SBR reinforced with polyester fabric. More tear resistant than homogenous rubber, Robco 423 CI is suitable for low pressure saturated steam, hot or cold water, air and gas applications.
Robco 2919Neoprene Coated PolyesterA very thin, lightweight material used to make protective boots/bellows and protective covers. Robco 2919 makes a far more durable cover than any other type of weather resistant product.
Soft resilient material with high chemical resistance
Robco VI-75
General purpose / high tensile
Robco 423-CI
For fabrication purposes
Robco 2919
Viton®is a registered trademark of DuPont Performance Elastomers L.L.C..
Temperature Range-80ºF - 450ºF
Tear Resistance80 ppi
Specific Gravity90.5 lb/ft³
Max. Hardness60 Duro
Tensile Strength600 psi Min.
Elongation300% Min.
Heat Aging:HardnessNA
Heat Aging:TensileNA
Heat Aging:ElongationNA
Shore A 60
Temperature Range-13ºF - 392ºF
Compression SetNA
Specific Gravity120 lb/ft³
Max. Hardness75 Duro
Tensile Strength1200 psi Min.
Elongation250% Min.
Heat Aging:HardnessNA
Heat Aging:TensileNA
Heat Aging:ElongationNA
Shore A 75
Temperature Range-20ºF - 180ºF
Compression Set50% Max.
Specific Gravity94 lb/ft³
Max. Hardness80 Duro
Tensile Strength500 psi Min.
Elongation100% Min.
Heat Aging:Hardness±15 points Max.
Heat Aging:Tensile±30% Max.
Heat Aging:Elongation-50% Max.
ASTM D20001AA805Shore 80
Temperature Range-40ºF - NA
Tearing Strength40 - 90 lbs
Specific Gravity11 lb/ft³
Max. HardnessNA
Breaking Strength360 - 640 lbs
Elongation100% Min.
Heat Aging:HardnessNA
Heat Aging:TensileNA
Heat Aging:ElongationNA
3
3
3
36”W 1/16” - 1/4”
36”W 1/32” - 1/4”
36”W - 48”W 1/16” - 1/4”
60”W 0.020” min.
PTFE
BA
SED
MAT
ERIA
LS
RUBB
ER M
ATER
IALS
Shore D 54
UV
UV
UV
Top-Chem-2000 is �re-safe according to API 6FA and ISO 10497 as well as TA-Luft (Clean Air) approval
www.robco.comGasket and Rubber
KLINGER Top-Chem-2000Fire-Safe and Chemically Resistant PTFEHeavy-duty modi�ed PTFE material manufactured with the addition of silicon carbide to improve the mechanical prop-erties of the PTFE based material. Greatly increased compres-sive strength and resistance to creep while maintaining excellent chemical resistance. Used in food, pharmaceutical and chemically aggressive applications.
KLINGER Top-Chem-2003Resilient at Low Bolt Load PTFE Modi�ed PTFE designed for use in low gasket load applications. Glass microspheres aid compressibility and general mechanical strength Developed for use with glass-lined �anges and other situations where compressive load is limited.
KLINGER Top-Chem-2005PTFE for Strong AcidsTop-Chem-2005 is a modi�ed PTFE optimized for use in acidic applications. The addition of glass improves mechanical properties of the PTFE and increases opera-tional range of PTFE based materials. Not recom-mended with strong alkalis.
KLINGER Top-Chem-2006PTFE for Strong AlkaliesTop-Chem-2006 is a modi�ed PTFE optimized for use in alkaline applications. The addition of barium sulfate improves mechanical properties of the PTFE and increases operational range of PTFE based materials. Not recom-mended with strong acids.
Top-Chem-2003 can be used for food, pharmaceutical, and chemically aggressive applications. Top-Chem-2003 has TA-Luft (Clean Air) approval
Klinger Top-Chem-2003
Top-Chem-2005 has TA-Luft (Clean Air) approval
Klinger Top-Chem-2005
Top-Chem-2006 has TA-Luft (Clean Air) approval.
Klinger Top-Chem-2006
www.robco.comGasket and Rubber
Robco 5700Neoprene & Nylon DiaphramA premium quality sheet made from high grade neoprene reinforced with nylon fabric. Robco 5700 is recommended for use where neoprene's physical and chemical properties in combination with nylon's strength are required.
Premium diaphragm Material
Robco 5700Compressibility
2%Recovery55% min.
Creep RelaxationNA
Thickness Decrease@Compression 7251 psi @75ºF 2%
@480ºF 5%
Thickness Increase after immersion in Sulfuric Acid 1%
Nitric Acid 2%
Density156 lb/ft³
Sealability<0.5 ml/min
Compressibility18%
Recovery40% min.
Creep RelaxationNA
Thickness Decrease@Compression 3625 psi @75ºF 9%
@480ºF 38%
Thickness Increase after immersion in Sulfuric Acid 1%
Nitric Acid 5%
Density106 lb/ft³
Sealability<0.1 ml/min
Compressibility7%
Recovery35% min.
Creep RelaxationNA
Thickness Decrease@Compression 7251 psi @75ºF 10%
@480ºF 30%
Thickness Increase after immersion in Sulfuric Acid 2%
Nitric Acid 7%
Density125 lb/ft³
Sealability<0.2 ml/min
Compressibility4%
Recovery40% min.
Creep RelaxationNA
Thickness Decrease@Compression 7251 psi @75ºF 10%
@480ºF 40%
Thickness Increase after immersion in Sulfuric Acid NA
Nitric Acid 7%
Density181 lb/ft³
Sealability<0.1 ml/min
Temperature Range-31ºF - 212ºF
Compression Set35% Max.
Specific Gravity88 lb/ft³
Max. Hardness70 Duro
Tensile Strength1400 psi Min.
Elongation250% Min.
Heat Aging:Hardness+15 points Max.
Heat Aging:Tensile-15% Max.
Heat Aging:Elongation-40% Max.
ASTM D20002BC714A14B14EO14EO34Shore A 702
3
2
2
2
TopChem® and Soft-Chem® are trademarks of Klinger Group
60”L x 60”W 0.040“ - 1/8”
60”L x 60”W 0.040“ - 1/8”
60”L x 60”W 0.040“ - 1/8”
60”L x 60”W 1/16“ - 1/8”
54”W 1/16” - 1/4”
Klinger Top-Chem-2000
KLINGER Soft-ChemHighly Compressible Expanded PTFEA pure, expanded PTFE material designed for use in low bolt load applications. O�ers improved compressive strength and improved creep resistance. Soft-Chem is suitable for use in food and pharmaceutical duties and can be used in glass-lined, plastic and steel �anges. Softest sheet for non-metallic �anges handling chemicals
Compressibility60%
Recovery12% min.
Creep Relaxation35%
Thickness Decrease @572ºF 28.6%
Thickness Increase @3625 psi 37%
Density53.1 lb/ft³
Sealability<0.002 ml/hr
2 60”L x 60”W 0.020“ - 0.240”
Klinger Soft-Chem
Economical diaphragm
Robco 5717
Robco 5717Neoprene & Polyester DiaphragmMade from high grade neoprene reinforced with poly-ester fabric. A superior quality diaphragm material with high burst strength and �exibility. Recommended for applications that require the �exibility of polyester and good oil resistance.
Robco 602Closed-Cell Neoprene SpongeSoft density neoprene, closed-cell sponge material for gaskets, weather stripping as well as sound and vibra-tion damping. This product is available in extruded pro�les, sheet or strips with or without pressure sensi-tive adhesive (PSA) backing.
Robco 1523General Purpose Open-Cell SpongeA natural open-cell sponge rubber with excellent abra-sion resistance, compressibility and good dry sealing properties. Readily absorbs liquids and gases. Available in sheets, strips or die cut parts with or without adhe-sive backing.
Robco SC-41Soft Density, Closed-Cell SpongeSC-41 is a PVC/NBR/Neoprene elastomeric sponge with moderate compression-de�ection and �ne cell structure. Meets required speci�cations for automotive, truck and appliance gasketing applications. Available with Pressure Sensitive Adhesives (PSA).
For gaskets, stripping, sound and vibration damping
Robco 602
Excellent abrasion resistance and compressibility properties
Robco 1523
Appropriate for automotive, truck and appliance gasketing
Robco SC-41
Temperature Range-22ºF - 212ºF
Compression Set35% Max.
Specific Gravity97 lb/ft³
Max. Hardness70 Duro
Tensile Strength1400 psi Min.
Elongation250% Min.
Heat Aging:Hardness+15 points Max.
Heat Aging:Tensile-15% Max.
Heat Aging:Elongation-40% Max.
ASTM D20002BC714A14B14EO14EO34Shore A 70
Temperature Range-40ºF - 150ºF
Compression Set25% Max.
Density7 - 11 lb/ft³
Tear Strength14 lb/in
Tensile Strength90 psi Min.
Elongation150% Min.
Heat Aging:CD±30%
Comp. Deflection @ 25%5 psi Min. - 9 psi Max.
Water Absorption5% Max.
ASTM D1056-072C2
Temperature Range-20ºF - 180ºF
Compression Set25% Max.
Density3.5 - 5.0 lb/ft³
C-Tear Strength10 lb/in Min.
Tensile Strength50 psi Min.
Elongation75% Min.
Heat Aging:CDNA
Comp. Deflection @ 25%2 psi Min. - 5 psi
Water AbsorptionNA
Temperature Range-20ºF - 160ºF
Compression Set15% Max.
Density26 lb/ft³
Max. Hardness45 Duro ±10
Tensile StrengthNA
ElongationNA
Heat Aging:CD±20%
Comp. Deflection @ 25%5 psi Min. - 10 psi Max.
Water AbsorptionNA
Shore 00 20-40 ASTM D10562B1 B2
3
3
3
48”W 1/16” - 1/4”
54”W 1/8” - 1”
48”W 1/8” - 1”
54”W 1/8” - 1”
PTFE
BA
SED
MAT
ERIA
LS
RUBB
ER M
ATER
IALS
SPO
NG
E RU
BBER
MAT
ERIA
LS
Vaccum - full pressure3000 psi
Gas leakage0.12 ml/min.
Shore 00 35-45
UV
Good swell characteristics
www.robco.comGasket and RubberKlingersil C-6400
KLINGERsil C-6400Synthetic FibersGeneral purpose commercial material with synthetic �bers and an SBR binder. Suitable for oils, water, light/low pressure steam, and gases. This material has good swell characteristics, yielding a more tightly sealed joint.
KLINGERsil C-7400Synthetic FibersEngineered synthetic material to handle severe service, especially caustics because of its EPDM binder. This style has proven outstanding against light steam duty. Prime industries include pulp & paper, power generation and chemical.
KLINGERsil C-8200Synthetic FibersC-8200 is a compressed �ber material developed for use with a broad range of chemicals; provides particu-larly good resistance to strong acids and alkalis. C-8200 is an economical alternative to PTFE-based materials in less aggressive applications.
KLINGER ThermicaHigh Temperature Gasket MaterialHigh temperature material with a nitrile binder. The addition of mica increases usable temperature range. Exhibits excellent leak tightness, thermal stability and load bearing properties. Suitable for a wide range of low pressure applications including oils, fuels, steam, hydrocarbons.
Designed to handle strong chemicals at lower bolt loads
Klingersil C-7400
Excellent choice for alkalis & acid resistance
Klingersil C-8200
Excellent stability at high temperatures
Klinger Thermica
www.robco.comGasket and Rubber
Compressibility8%
Recovery50% min.
Creep Relaxation20%
Thickness Decrease@Compression 7251 psi @73ºF 12%
@572ºF 11%
Thickness Increase after immersion in ASTM Oil 1 10%
ASTM Fuel B 10%
Density112 lb/ft³
Sealability<0.20 ml/hr
Compressibility7%
Recovery50% min.
Creep Relaxation25%
Thickness Decrease@Compression 7251 psi @73ºF 9%
@572ºF 5%
Thickness Increase after immersion in ASTM Oil 1 15%
ASTM Fuel B 5-20%
Density94 lb/ft³
Sealability<0.30 ml/hr
Compressibility9%
Recovery50% min.
Creep Relaxation30%
Thickness Decrease@Compression 7251 psi @73ºF 7%
@572ºF 17%
Thickness Increase after immersion in ASTM Oil 1 5%
ASTM Fuel B 10%
Density106 lb/ft³
Sealability<0.30 ml/hr
Compressibility12%
Recovery55% min.
Creep RelaxationNA
Thickness Decrease@Compression 7251 psi @73ºF 17%
@572ºF 13%
Thickness Increase after immersion in ASTM Oil IRM 8%
ASTM Fuel B NA
DensityNA
SealabilityNA
Klingersil®, Top-Sil® and Thermica®are trademarks of Klinger Group
60”L x 60”W 1/64“ - 1/8”
60”L x 60”W 1/64“ - 1/8”
60”L x 60”W 1/64“ - 1/8”
78”L x 59”W 1/32“ - 1/8”
Robco SC-42Medium density, Closed-Cell Sponge SC-42 is a PVC/NBR/Neoprene elastomeric sponge mate-rial, ideal for gaskets, weather stripping as well as sound and vibration damping. Available in extruded pro�les, sheet or strips with or without pressure sensitive adhesive (PSA) backing. For gaskets, stripping, sound and vibration damping
Robco SC-42Temperature Range
-20ºF - 180ºF Compression Set
25% Max.Density
6 - 8 lb/ft³Tear Strength
15 lb/inTensile Strength
75 psi Min.Elongation100% Min.
Heat Aging:CDNA
Comp. Deflection @ 25%5psi Min. - 9psi Max.
Water AbsorptionNA
Shore 00 35-50 ASTM D10562B2 B23
48”W 1/8” - 1”
For gaskets, stripping, sound and vibration damping
Robco SC-43Robco SC-43Firm density, Closed-Cell Sponge SC-43 is a PVC/NBR/Neoprene elastomeric sponge material, suitable for gaskets, weather stripping as well as sound and vibration damping. Available in extruded pro�les, sheet or strips with or without pressure sensi-tive adhesive (PSA) backing.
Robco White SiliconeStability at high temperaturesPremium quality material used where highly compress-ible gaskets are required at temperatures up to 500ºF. The cellular structure is produced without the use of CFCs resulting in less damage to the environment.
Robco Microcellular UrethaneSuperior Foam/SpongeO�ers enhanced recovery over other types of foam and sponge, resulting in a superior seal, particularly in low seat stress applications. This material exhibits resistance to UV exposure, ozone and is environmentally safe and clean. An excellent choice for seals, gaskets and spacers used in electronic equipment.
Robco 100NNeoprene and CorkAn extremely durable medium grade neoprene and cork material with superior tensile and tear strength; highly oil resistant. Ideal for transformer sealing applications.
Pro�le extrusions, sheeting, jointed rings, punched forms
Robco White Silicone
Perfect choice for vibration & impact damping
Robco Microcellular Urethane
#1 choice for transformers
Robco 100N
Temperature Range-40ºF - 200ºF
Compression Set30% Max.
Density9 lb/ft³
Max. Hardness60 Duro
Tensile Strength71 psi Min.
Elongation150 %
Heat Aging:CD±30%
Comp. Deflection @ 25%9psi Min. - 13psi Max.
Water Absorption5% by/wt Max.
ASTM D10562A3Shore 00 60
Temperature Range-67ºF - 500ºF
Compression Set25% Max.
Density0.02 lb/ft³
Max. HardnessNA
Tensile Strength90 psi Min.
Elongation200 %
Heat Aging:CDNA
Comp. Deflection @ 25%6psi Min. - 14psi Max.
Water Absorption5% by/wt Max.
Temperature Range-40ºF - 194ºF
Compression Set5% Max.
Density17 lb/ft³
Max. Hardness12 Duro
Tensile Strength40 psi Min.
Elongation100 %
Heat Aging:CDNA
Comp. Deflection @ 25%NA
Water AbsorptionNA
Shore O 12
Compression Set60% Max.
Recovery75% min.
Thickness Increase after immersion in ASTM Oil 1 10%
ASTM Fuel A 15%
Density45 lb/ft³Flexibility
2 Max. (Factor)Tensile Strength
250 psiMax. Hardness
70 Duro
Shore A 50 - 70
Max. Comp. @ 400psi35%
3
3
3Available in soft, medium and �rm density.
36”L x 36”W 1/32“ - 1/4”
72”L x 42”W 1/8” - 1”
54”W 1/32 - 1/2”
36”L x 24”W 1/16” - 1/2”
COM
PRES
SED
MAT
ERIA
L
Robco Milam PSSReinforced Mica Sealing MaterialMilam-PSS is an asbestos free mica based sealing material reinforced with a stainless steel tanged insert. Speci�cally designed for hot, dry gas applications. The outstanding chemical resistance of mica also makes the gasket suitable for a wide range of other applications.
Good for exhaust manifolds, turbines, turbo chargers, and air heat exchangers.
Robco Milam PSSCompressibility
15% - 23%Recovery
40% - 50% min.Stress Relaxation
50MPa/300ºC 5801psi
Int. Pressure29 psi
Gas Leakage>100 ml/min
Min. Temp.NA
Max. Temp.1472ºF - 1832ºF
Stress11602 - 14503 psi
Stress Relaxation2600 - 4641psi
47”L x 40”W 0.051“ min.
40MPa/300ºC
MIC
A L
AM
INAT
ES
SPO
NG
E RU
BBER
MAT
ERIA
LSCO
RK/ R
UBB
ER
UV
UV
UV
UV
Best general purpose sheet . Fire-tested
www.robco.comGasket and RubberKlingersil C-4433
KLINGERsil C-4433Fiberglass, Aramid & Inorganic FibersGreat general purpose material with good chemical resistance and mechanical properties. Best overall steam sheet with the best load bearing capability avail-able in an asbestos-free gasket. C-4433 has passed the �re test criteria of API 607 Fourth Edition.
KLINGERsil C-4439Fiberglass & Aramid, Steel ReinforcedA top quality synthetic �ber based material with a nitrile rubber binder. The addition of galvanized low carbon steel reinforcement provides high pressure resistance. C-4439 has passed the �re test criteria of API 607 Fourth Edition.
KLINGERsil C-4500Carbon FibersA premium grade carbon �ber based material with an NBR binder designed for use under high temperatures and pressures. A universal material with good steam, oil, and chemical resistance. Particularly suited for use in highly alkaline applications, high internal pressure applications and those requiring good load bearing characteristics.
KLINGERsil C-4509Carbon Fibers, Steel reinforcedA top quality carbon �ber based material with a nitrile rubber binder and an expanded steel reinforcement. Provides greaterresistance to thermal degradation in high pressure applications and increased temperatures. Recommended in a wide range of media including oils, hydrocarbons, alkalis and steam.
KLINGERsil C-5400Synthetic Fibers and NeopreneC-5400 is a blend of synthetic �bers with a neoprene binder. Introduced for service with refrigerants and various oils. Used in all industries where refrigerants are the major service, such as the Food Industry.
Fire-tested and suitable for high pressures
Klingersil C-4439
Suitable for wide range of chemical applications
Klingersil C-4500
Excellent resistance to thermal degradation
Klingersil C-4509
Designed for use with refrigerants
Klingersil C-5400
www.robco.comGasket and Rubber
Klingersil® is a trademark of Klinger Group
Compressibility7%
Recovery60% min.
Creep Relaxation20%
Thickness Decrease@Compression 7251 psi @73ºF 7%
@572ºF 8%
Thickness Increase after immersion in ASTM Oil 1 5%
ASTM Fuel B 7%
Density112 lb/ft³
Sealability <0.5 ml/hr
Compressibility7%
Recovery50% min.
Creep Relaxation20%
Thickness Decrease@Compression 7251 psi @73ºF 8%
@572ºF 4%
Thickness Increase after immersion in ASTM Oil 1 5%
ASTM Fuel B 5-10%
Density131 lb/ft³
SealabilityNA
Compressibility12%
Recovery60% min.
Creep Relaxation20%
Thickness Decrease@Compression 7251 psi @73ºF 10%
@572ºF 15%
Thickness Increase after immersion in ASTM Oil 1 5%
ASTM Fuel B 5%
Density87 lb/ft³
Sealability<0.30 ml/hr
Compressibility12%
Recovery70% min.
Creep Relaxation20%
Thickness Decrease@Compression 7251 psi @73ºF 9%
@572ºF 7%
Thickness Increase after immersion in ASTM Oil 1 5%
ASTM Fuel B 5%
Density125 lb/ft³
SealabilityNA
Compressibility8%
Recovery50% min.
Creep Relaxation20%
Thickness Decrease@Compression 7251 psi @73ºF 11%
@572ºF 21%
Thickness Increase after immersion in ASTM Oil 1 5%
ASTM Fuel B 10%
Density106lb/ft³
Sealability<0.20 ml/hr
60”L x 60”W 1/32“ - 1/8”
60”L x 60”W 1/16“ - 1/8”
60”L x 60”W 1/64“ - 1/8”
60”L x 60”W 3/64“ - 1/8”
60”L x 60”W 1/64“ - 1/8”80”L x 80”W Available in 1/8” thick
Robco E-30 Most Economical Cork GasketE-30 is an economical neoprene and cork material. Suitable for sealing at low bolting pressures in a wide variety of applications.
Most economical cork gasket
Robco E-30Compression Set
60% Max.Recovery95% min.
Thickness Increase after immersion in ASTM Oil 1 10%
ASTM Fuel A NA
Density33 lb/ft³Flexibility
3 Max. (Factor)Tensile Strength
150 psi Min.Max. Hardness
65 DuroMax. Comp. @ 400psi
50%
Shore 50 - 65 36”L x 36”W 1/8“ - 1/4”
For oil sealing, transmissions and automotive gaskets
Robco E-40Robco E-40 Neoprene and CorkE-40 is an excellent medium grade neoprene and cork material used for oil and transmission seals and auto-motive gaskets. A high-quality material with medium compressibility and oil resistance.
Robco E-50General purpose Neoprene and CorkFirm grade neoprene and cork with high tensile strength and tear resistance and low compression set. E-50 has excellent heat resistance and moderate swell-ing in oils and fuels. Also suitable for high bolting pres-sure.
Robco E-70Co-Polymer and CorkAn economical sealing material, E-70 is a soft grade co-polymer and cork material with moderate resistance to fuels. Commonly used in transformers and automo-tive and industrial applications.
General purpose
Robco E-50
Used in transformers and most industrial applications
Robco E-70
Compression Set60% Max.
Recovery80% min.
Thickness Increase after immersion in ASTM Oil 1 20%
ASTM Fuel A 15%
Density44 lb/ft³Flexibility
3 Max. (Factor)Tensile Strength
250 psi Min.Max. Hardness
75 DuroMax. Comp. @ 400psi
35%
Shore A 55 -75
Compression Set55% Max.
Recovery75% min.
Thickness Increase after immersion in ASTM Oil 1 20%
ASTM Fuel A 15%
Density46 lb/ft³Flexibility
3 Max. (Factor)Tensile Strength
250 psi Min.Max. Hardness
70 DuroMax. Comp. @ 400psi
25%
Shore A 10 - 70
Compression Set60% Max.
Recovery75% min.
Thickness Increase after immersion in ASTM Oil 1 10%
ASTM Fuel A 10%
Density43 lb/ft³Flexibility
1 Max. (Factor)Tensile Strength
200 psi Min.Max. Hardness
70 DuroMax. Comp. @ 400psi
45 %
Shore A 60 - 70
36”L x 36”W 1/32“ - 1/4”
36”L x 36”W 1/16“ - 1/4”
36”L x 36”W 1/16“ - 3/8”
Robco FKSBeater Add Gasket SheetMade from cellulose �ber and �ne grain cork with an SBR binder. FKS is extremely compressible, conforming well to rough surfaces. Recommended for use in water and oil applications.
Low pressure, Fuel and oil resistance
Robco FKS
43” W 1/32” - 1/16”
Compressibility33%
Recovery38% min.
ASTM Oil IRM 18%
ASTM Fuel B 18% Water 17%
Density40 lb/ft³
Tensile Strength1241 psi
Max. Temperature300ºF
Creep RelaxationNA
Thickness Increase after immersion in
COM
PRES
SED
MAT
ERIA
L
CORK
/ R
UBB
ER M
ATER
IALS
General purpose sheet with good chemical resistance
www.robco.comGasket and RubberKlingersil C-4300
KLINGERsil C-4300Aramid FibersC-4300 is a general purpose material manufactured from aramid �bers with an NBR binder and is com-monly used with hydrocarbons, fuels, oils and water. Provides good sealability and good chemical resist-ance.
KLINGERsil C-4401Synthetic FibersOur most popular material suitable for use with air, water, steam, oils, fuels, and gases. Particularly suited for use in internal combustion engines, compressors, and hydraulic applications.
KLINGERsil C-4408Wire ReinforcedC-4408 material is a synthetic �ber based material with a nitrile binder reinforced with a steel woven mesh insert. Recommended for applications under high stress, vibration and �uctuating temperatures and pressures.
KLINGERsil C-4409Carbon Steel InsertC-4409 is a synthetic �ber and nitrile binder reinforced with a galvanized low carbon steel insert excellent for use in hot gases, vibration and high temperature and pressure applications. C-4409 is used as a replacement for Spiral Wound Gaskets.
KLINGERsil C-4430Fiberglass and Aramid FibersGlass �ber based with an NBR binder for use in a wide range of chemical applications. A premium grade compressed �ber material with exceptional compressive strength and good chemical and temperature resistance. For oil, steam, hydro-carbon, oxygen and water applications.
Good general purpose material
Klingersil C-4401
Suitable for �uctuating temperatures & pressures
Klingersil C-4408
Excellent for hot gases and high pressure applications
Klingersil C-4409
Premium grade material and excellent steam sheet
Klingersil C-4430
Compressibility10%
Recovery50% min.
Creep Relaxation25 %
@572ºF 25%
Thickness Increase after immersion in ASTM Oil 1 5%
ASTM Fuel B 10%
Density100 lb/ft³
Compressibility7%
Recovery50% min.
Creep Relaxation20%
Thickness Decrease@Compression 7251 psi @73ºF 10.5%
@572ºF 17%
Thickness Increase after immersion in ASTM Oil 1 5%
ASTM Fuel B 7%
Density112 lb/ft³
Sealability<0.5 ml/hr
Thickness Decrease@Compression 7251 psi @73ºF 10.5%
Sealability<0.25 ml/hr
Compressibility8%
Recovery50% min.
Creep Relaxation20%
Thickness Decrease@Compression 7251 psi @73ºF 10%
@572ºF 22%
Thickness Increase after immersion in ASTM Oil 1 5%
ASTM Fuel B 5%
Density119 lb/ft³
SealabilityNA
Compressibility7%
Recovery50% min.
Creep Relaxation20%
Thickness Decrease@Compression 7251 psi @73ºF 10%
@572ºF 10%
Thickness Increase after immersion in ASTM Oil 1 5%
ASTM Fuel B 5%
Density125 lb/ft³
SealabilityNA
Compressibility9%
Recovery50% min.
Creep Relaxation20%
Thickness Decrease@Compression 7251 psi @73ºF 8%
@572ºF 11%
Thickness Increase after immersion in ASTM Oil 1 5%
ASTM Fuel B 5%
Density96 lb/ft³
SealabilityNA
2
2
Klingersil® is a trademark of Klinger Group
60”L x 60”W 1/64“ - 1/8”
60”L x 60”W 0.008“ - 1/8”
60”L x 60”W 1/32“ - 1/8”
60”L x 60”W 3/64“ - 1/8”
60”L x 60”W 1/64“ - 1/8”
80”L x 80”W Available in 1/8” thick
COM
PRES
SED
MAT
ERIA
L
www.robco.comGasket and Rubber
Robco GRC-36Economy Grade An economical grade cork co-polymer with medium fuel and oil resistance and medium compressibility. Ideal for the automotive aftermarket.
Robco H-35Nitrile and Cork - RollTop quality nitrile and cork material that is highly compressible with good sealing capability at low bolting pressure. Resistant to oil, aromatic fuel and solvent.
Ideal for the automotive aftermarket
Robco GRC-36
Resistance to oil, fuels and solvents
Robco H-35
Compression Set70% Max.
Recovery80% min.
Thickness Increase after immersion in ASTM Oil 1 10%
ASTM Fuel A 10%
Density30 lb/ft³Flexibility
1 Max. (Factor)Tensile Strength
140 psi Min.Max. Hardness
60 DuroMax. Comp. @ 400psi
55%
Shore A 50 - 60
Compression Set80% Max.
Recovery80% min.
Thickness Increase after immersion in ASTM Oil 1 10%
ASTM Fuel A 10%
Density33 lb/ft³Flexibility
3 Max. (Factor)Tensile Strength
250 psi Min.Max. Hardness
60 DuroMax. Comp. @ 400psi
45 %
Shore A 10 - 60
36”L x 36”W 1/32“ - 1/2”
42”W 1/32” - 1/4”
42”W 1/32” - 1/4”
Shore A 10 - 65
Robco H-45Nitrile and Cork - SheetTop quality nitrile and cork material that is compressible with good sealing capability at low bolting pressure. Highly resistant to oil, aromatic fuel and solvent.
High resistance to oil, fuels and solvents
Robco H-35Compression Set
80% Max.Recovery75% min.
Thickness Increase after immersion in ASTM Oil 1 10%
ASTM Fuel A 15%
Density8 lb/ft³
Flexibility3 Max. (Factor)
Tensile Strength250 psi Min.
Max. Hardness65 Duro
Max. Comp. @ 400psi35 %
Perfect for high bolting pressure seals
Robco H-55Robco H-55Nitrile and CorkA nitrile and cork material with high tensile and tear strength. Perfect for high bolting pressure seals includ-ing those recommended for automotive, fuel pumps, meters and general industrial applications.
Robco N104Economical Cork Sheet Bonded cork sheet recommended as a lining and facing material, for sporting goods, bulletin boards and die cut parts.
Economical cork sheet for non-gasket applications
Robco N104
Compression Set55% Max.
Recovery75% min.
Thickness Increase after immersion in ASTM Oil 1 10%
ASTM Fuel A 10%
Density46 lb/ft³Flexibility
3 Max. (Factor)Tensile Strength
250 psi Min.Max. Hardness
80 DuroMax. Comp. @ 400psi
25 %
Shore A 60 - 80
Max.Temperature250ºF
Recovery80% min.
Thickness Increase after immersion in NA
NA
Density13.7 lb/ft³Flexibility
5 Max. (Factor)Tensile Strength
75 psi Min.Max. Hardness
NAMax. Comp. @ 100psi
40 %
36”L x 36”W 1/32“ - 1/2”
48”W 1/32” - 1/4”
CORK
/ R
UBB
ER M
ATER
IALS
Gasket and Rubber
Low pressure applications
60”L x 60”W 1/32“ - 1/8”
www.robco.comGasket and RubberRobco 200-HM
Robco 200-HM 99% Pure Graphite without reinforcementA homogenous graphite gasket sheet for use in sealing conditions where low internal pressures exist. High quality industrial-grade (99% carbon) sealing element with low ash content and low leachable chloride levels, o�ers high compressibility and low creep.
Robco 204-SFI Stainless Steel Foil-reinforced Graphite SheetRobco 204 SFI is a material of choice for sealing medium pressure applications. Robco 204 SFI can be used in a wide variety of chemicals applications.
Robco 210-STI Stainless Steel Tang-reinforced Graphite SheetRobco 210 STI excels in aggressive, high temperature, high pressure applications. Can replace spiral wound gaskets in large and custom sizes. 210 STI is the choice material to ensure a long-lasting seal in di�cult appli-cations.
KLINGER Quantum2nd Generation Compressed Fiber SheetingExclusively HNBR bound, Quantum o�ers excellent temperature resistance across a much broader range of chemicals than all other �ber reinforced gasket materials. Klinger Quantum is FDA compliant for food applications and �re tested as per API 607/ISO 10497.
General Purpose
Robco 204-SFI
High-pressure / High temperature
Robco 210-STI
Best innovation in the �ber reinforced gasket composite
Robco QuantumCompressibility
10%Recovery60% min.
Stress RelaxationBS7531 3916 psi
Klinger Hot Compression Test, 7251 psi Thickness Decrease@73ºF 10%
@572ºF 14%
@752ºF 20%
Thickness Increase after immersion in ASTM Oil 3 3%
ASTM Fuel B 5%
Density106 lb/ft³
www.robco.com
Robco Transilcor Silicone and CorkTransilcor is a premium silicone and cork material with medium compressibility and good oil resistance. A superior silicone base material for medium bolting pressure with excellent thermal stability.
Robco HydroilVegetable Fiber SheetHydroil provides fair sealability, good conformability and good resistance to petroleum oils, fuel oils and many organic solvents. This cellulose �ber gasket material with a protein and glycerin binder is an low-cost light duty, general purpose gasket material. Not intended for sealing water where exposure to drying exists.
Excellent thermal stability
Robco Transilcor
Low cost gasket material.
Robco Hydroil
Compression Set70% Max.
Recovery80% min.
Thickness Increase after immersion in ASTM Oil 1 10%
ASTM Fuel A 20%
Density50 lb/ft³Flexibility
3 Max. (Factor)Tensile Strength
350 psi Min.Max. Hardness
75 DuroMax. Comp. @ 400psi
28 %
Shore A 60 - 70
Max. Temperature250ºF
Max. Pressure 2000 psi
Weight Increase after immersion in ASTM Oil 3 15%
ASTM Fuel B 15%
DensityNA
Max. Comp.40%
Max. Comp. @ 400psi15 %
Compressibility44%
Recovery15% min.
Creep Relaxation5%
Temp. Oxidizing -400ºF - 850ºF
Temp. Mild-Oxidizing-400ºF - 1200ºF
Sealability0.5 ml/hr
Gasket Factor / m1.25
Gasket Factor / y700 psi
Temp. Non-Oxidizing-400ºF - 5400ºF
Compressibility42%
Recovery17% min.
Creep Relaxation5%
Temp. Oxidizing -400ºF - 850ºF
Temp. Mild-Oxidizing-400ºF - 1200ºF
SealabilityNA
Gasket Factor / m2
Gasket Factor / y900 psi
Temp. Non-Oxidizing-400ºF - 1800ºF
Compressibility42%
Recovery17% min.
Creep Relaxation5%
Temp. Oxidizing -400ºF - 850ºF
Temp. Mild-Oxidizing-400ºF - 1200ºF
Operating Pressure1200 psi max.
Gasket Factor / m2
Gasket Factor / y2500 psi
Temp. Non-Oxidizing-400ºF - 5400ºF
Note: This brochure shows only the most commonly used products. Other materials and composites are available upon request. Contact your Robco representative for technical details and additional speci�cations.
2
2
2
ROLL WIDTH SHEET SIZE* THICKNESS (*typically in stock)
Meets MIL-G-12803A Id No. P3313B andMIL-G-12803B/C Id No. F326128M6 speci�cations
Quantum® is a trademark of Klinger Group
60”L x 60”W 1/32“ - 1/8”
60”L x 60”W 1/32“ - 1/8”
78”L x 59”W 1/32“ - 1/8”
36”L x 36”W 1/16“ - 1/4”
36”W 0.01” - 1/8”
Thickness Increase after immersion in ASTM Oil 3 5%
ASTM Fuel B 5%
Boiler GasketsHandhole and manhole gaskets
Rubber MatsMats for Industrial, Commercial, Food Service, Static and Electrical Applications
Small PartsGrommets, O-Rings, Washers
TubingSleeves, Cords, Strips, Pro�les and more...
Robco provides various types of gaskets for boilers, heaters and other high temperature and/or high pressure vessels.
Our rubber sheeting can be cut and manufactured as �oor and surface matting speci�c to your application with machined groves, holes, patterns, etc. per your speci�cations.
We manufacture small rubber parts such as grommets, o-rings, washers, spacers, stoppers and plugs to suit your needs.
Tubing, cord and pro�le parts can be ordered from our wide range of specialized rubber materials such as EPDM, Viton, NBR, Nitrile, Neoprene and so much more...
23
HIGH HIGH LOW CHEMICAL ACID CAUSTIC ALKALIS OXIDATION
OXYGEN OZONE OIL WATER STEAM U.V. PULP & FOOD
GAS PETROL AERO- PHARMA- HYDRO- HEAVY
PRESS. TEMP. TEMP. APPS. APPS. APPS. APPS. APPS.
APPS. APPS. APPS. APPS. APPS. EXPOSURE PAPER INDUSTRY
INDUSTRY INDUSTRY SPACE CEUTICALS CARBONS INDUSTRIAL
Disclaimer: The data contained in this brochure is representative; These ratings supplied are suggested as a guideline and should only be used for evaluating your speci�c application. When in doubt, contact Robco. The information contained in this speci�cation sheet should not be considered a warranty, either expressed or implied, including, but not limited to, a warranty of merchantability or �tness for a particular purpose. In no event shall Robco be liable for any incidental or consequential damages resulting from the use, misuse or inability to use the product. This exclusion applies regardless of whether such damages are sought based on breach of warranty, breach of contract, negligence, strict liability in tort, or any other legal theory.
FLEX
IBLE
GRA
PHIT
ECO
MPR
ESSE
D M
ATER
IAL
KLINGER Top-Sil-ML1Synthetic Fibers and ElastomersA combination of synthetic �bers and various elastomers bound in a multi-layer structure. Top-Sil ML1 has excellent properties such as less creep, high permissible load, delayed aging and leak-free sealing at high temperatures. Suitable for use in steam, oils, fuels, hydrocarbons and potable water.
Innovative multi-layered material
Klinger Top-Sil-ML1Compressibility
9%Recovery50% min.
Creep RelaxationNA
Thickness Decrease@Compression 7251 psi @73ºF 8%
@572ºF 15%
Thickness Increase after immersion in ASTM Oil IRM 4%
ASTM Fuel B 8%
Density106 lb/ft³
SealabilityNA
78”L x 59”W 1/32“ - 1/8”
CORK
/ R
UBB
ER M
ATER
IALS
OTH
ER P
ROD
UC
TSLE
GEN
D
UV
Metal jacket gaskets o�er an economical seal wheresealing faces are narrow.
www.robco.comGasket and RubberMetal Jacketed
Metal JacketSolid design - Solid resultsMetal jacket gaskets are the most basic type of semi-metallic gasket combining the high pressure suitability and blow-out resistance of metallic materials with the improved compressibility of soft materials.
Corrugated MetalGraphite CoatedCMGC gaskets featuring a corrugated metal core with a highly compressible graphite overlay, delivering a reliable gasket with the ability to seal at low bolt loads, conform to minor �ange imperfections and be manu-factured in virtually any con�guration.
Enviro�exSpiral Wound GasketSpiral Wound gaskets consist of metal strips spirally wound with a soft sealing �ller material. This sealing element is assembled with or without a metallic centering and/or inner ring(s). Made to �t #150 to #2500 pipe class �anges, they can be custom-made in various alloys and �llers to meet your requirement, custom sizes and application.
Maxipro�leSemi-Metallic GasketThe Maxipro�le is a composite gasket that utilizes a serrated metal core with a soft facing material. The metal core is machined on each contact face with concentric serrations providing high pressure areas and ensuring that the soft coating�ows into any imperfections in the �ange even at relatively low bolt loads.
Ring JointMetallic Ring Joint GasketMetallic ring joint gaskets are heavy duty, high-pressure gaskets largely used in o�shore petrochemical applications. These precision-engineered components designed for use in conjunc-tion with precision-machined �anges are manufactured in accordance with ASME B16.20 and API 6A.
A logical choice for standard �ange, heat exchanger, boiler and valve sealing applications.
Corrugated Metal
*Enviro�ex MGM withstands higher temperatures
Enviro�ex Spiral Wound Gasket
Suitable for a wide range of operating conditions
1 1/2” - 36 ” (Depending on type/shape)
and Enviro�ex MGM
www.robco.comGasket and Rubber
Can be used for this application Denotes Best Choices
Materials Available:Soft IronStainless Steel Soft SteelMonelInconelIncoloy
BrassAluminumTitaniumNickelBrassCopper
Types:Double Jacketed Single JacketedSingle Corrugated (no filler)Double Jacketed Corrugated(soft filler)
Manufactured to ASME B16.20 specifications
Material Brinell Hardness Temperature Limitation IdentificationSoft Iron 90 Low Carbon Steel 120 4-6% Cr ½% Mo:F5 130 304 SS 160 316 SS 160 321 SS 160 347 SS 160 410 SS 170 Titanium - Inconel - Incoloy - Hastelloy C-276 -
Inconel© 600 & 625Incoloy© 800 & 825Grade 2 & 7 TitaniumAlloy 20Hastelloy© C276Monel© 400
304 Stainless Steel 316 Stainless Steel316L Stainless Steel347 Stainless Steel410 Stainless SteeDuplex 2205
Core Materials Available:
Core Material Max. Temp. Core Material Max. Temp.Stainless Steel 316L 1472ºFStainless Steel 304 1202ºFMonel 400 1472ºFNickel 200 1112ºF
Inconel 600 & 625 1832ºFIncoloy 825 1832ºFHastelloy B2 1832ºFHastelloy C-276 1832ºF
Facing Material Max. Temp.Graphite 1022ºFPTFE 500ºFMica 1832F
Max. Pressure
6000 psi
Maxipro�le Semi-Metallic Gasket
Winding Material Max. Temp. Winding Material Max. Temp.Stainless Steel 304 1200ºF Stainless Steel 316L 1200ºFStainless Steel 316 Ti 1200ºF
Stainless Steel 347 1200ºFMonel 400 1472ºFCarbon Steel 932ºF
Filler Material Max. Temp. Graphite 850ºF PTFE 500ºF Mica 1832ºF
SEM
I-MET
ALL
ICRI
NG
JOIN
TS
Cate
gory
Style NumberMax Temp
ºF
High Temp App.
High Press. App. Acid Caustic Oil Chemical Oxygen Steam Water Gas U.V. Ozone Oxidation Alkalis
Hydro-Carbons
steam/liquidMETAL JACKET As per material
CORRUGATED METAL As per material
ENVIROFLEX SWG As per material
MAXIPROFILE SWG As per material
RJ RING JOINT As per material
200-HM 1500204-SFI 1500210-STI 1500TOP-SIL ML1 400QUANTUM 660C-4300 400-700C-4401 450-750C-4408 450-750C-4409 550-775C-4430 500-800C-4433 500-800C-4439 500-800C-4500 550-850C-4509 550-850C-5400 400-725C-6400 400-725C-7400 400-675C-8200 300-400MILAM PSS 1832THERMICA 752SOFT-CHEM 500TOP-CHEM 2000 482TOP-CHEM 2003 482TOP-CHEM 2005 482TOP-CHEM 2006 482ROBCHEM CF-500 500ROBCHEM CF-504 500ROBCHEM CF-510 500SEALON 500VIRGIN PTFE 500JOINTEX 500435 180460 185464 180465 200466 200467 2009370 2009863 200EP-60 250EPP-60 300SI-60 450VI-75 362423-SBR-CI 1802919 na5700 2125717 212602 1501523 160SC-41 180SC-42 180SC-43 180WHITE SILICONE -M.C. URETHANE -100N -E-30 -E-40 -E-50 -E-70 -FKS 300GRC-36 -H-35 -H-45 -H-55 -N104 250TRANSILCOR -HYDROIL 250
Rub
ber M
ater
ials
Spon
ge R
ubbe
rC
ork
/ Rub
ber
Sem
i-Met
allic
Flex
ible
G
raph
iteC
ompr
esse
d M
ater
ials
Mic
aPT
FE b
ased
mat
eria
ls
23UV
-60 to 400°C D -40 to 500°C S-250 to 500°C F5 -250 to 650°C S304 -110 to 800°C S316 -250 to 870°C S321 -250 to 870°C S347 -20 to 500°C S410 350ºC TI 500°C 625 500°C 825 1000°C C-276
EST. 1911
GASKET & RUBBER
MONTREAL Tel.: 514.367.2252 Fax: 514.367.1144MISSISSAUGA Tel.: 905.564.6555 Fax: 905.564.6901EDMONTON Tel.: 780.469.0601 Fax: 780.469.0765
Email: [email protected] Resistant Materials - Engineered Plastics - Rubber Products - Metallic GasketsSoft Gaskets - Mechanical Seals - Compression Packing - Lubricants & Greaseswww.robco.com
Spiral Wound
Semi-Metallic
Ring Joint
Boiler
Compressed
Flexible Graphite
Cork
Mica
Rubber
PTFE
EMI / RFI Shielding
Gasket & Rubber Specialists
We are passionate about problem solving. We take pride in creating substantial value for our customers using our expertise, experience, and technical resources. We believe that given the opportunity, Robco can make a tremendous positive impact on our customers' operational e�ciency by extending the time between equipment failures, eliminating recurring maintenance problems, reducing leaks, and generally alleviating headaches.
Since 1911, Robco products are used everywhere in heavy industry as components of original equipment and in aftermarket mainte-nance and repair.
ISO 9001 and ISO 14001 Certi�ed, our commitment to focusing on engineered solutions has fostered an alignment between our custom-ers’ satisfaction and our success while caring for our environment.
Total Cost of Ownership
Our T.C.O. approach to problem solving often results in our customers achieving annual savings that drastically outweigh their actual purchase costs.
Made in Canada
Robco Gaskets are manufactured at our Edmonton, Toronto and Montreal facilities ensuring unsurpassed quality control and quick turnaround times for our North American customers.