motionrefer to video: motion visualized) till now we have described motion mathematically. but this...
TRANSCRIPT
2
IX – Std. Motion – Class notes I
©Byjus
Instructions: This booklet given to you is your Class Notes. Keep filling this sheet as the class proceeds.
At the end of this session, you will have your notes ready.
1. Introduction
(Refer to video: Understanding Motion)
a. Concept of Rest and Motion
Question1.A person travelling with you in a bus is at rest. Do you agree with the statement?
Motion is one of the most important topics in physics. You can say that physics or natural
enquiry essentially began with ‘motion’. We see a lot of objects around us that are moving.
For instance, we see cars running on roads, birds flying etc. While other objects like
buildings appear to be at rest. But the same buildings seem to be in motion if viewed from
a moving car.
Don't forget that even if you appear to be standing still, the Earth is moving around the Sun,
and the Sun is moving around our galaxy. The galaxy itself is speeding around at great
speeds, even at speed greater than speed of light.
Question2. How can the galaxies move apart at a speed greater than the speed of light? Doesn’t this
violate Einstein’s theory?
Did You Know?
Aristotle noted that objects given an initial push along the ground (or
on a tabletop) always slow down and stop. Consequently, Aristotle
argued, the natural state of an object is to be at rest. Galileo, the first
true experimentalist, re-examined horizontal motion in the 1600s and
found it was not true!
So when do we say that a body is moving? Does it have to do anything with the observer?
Or is it an absolute term?
b. Frame of Reference
Motion is a relative term. There is nothing as ‘absolute motion’. We inherently assume that
we are at rest and we try to measure motion relative to us. An object is said to be at rest
with respect to another object if it does not change its position with respect to the other
object. If it changes its position, then it is said to be in motion.
Motion of a body is observed by attaching a frame of reference to an observer and we
measure the change in position of the body relative to that frame.
3
IX – Std. Motion – Class notes I
©Byjus
Figure 1: Frame of Reference
For example, suppose a person A is standing on a cart, which is moving with constant
velocity, and he throws a ball vertically upwards. Now we analyze the motion of ball. If the
cart itself is our reference frame, the motion of ball is straight line as observed by A. But if
our reference frame is attached to ground, the motion of the ball is somewhat curved as
seen by observer B.
Now that we know what a reference frame is and how to determine whether an object is
moving or not, let us quantify this motion.
2. Distance and Displacement
(Refer to video: Distance and Displacement)
Motion is basically change in position of a body with time. This change in position can be
measured using:
Distance
Displacement
Suppose a person wants to go from point A to point B. There can be different ways to do so.
He can take the path ACB or ADB or AEB.
Figure 2: Distance and Displacement
The lengths of paths ACB, ADB or AEB are the actual length of path that the person has to
cover. This is represented by distance. Distance is the length of actual path traversed by a body.
It is a scalar quantity having only magnitude, and no direction.
4
IX – Std. Motion – Class notes I
©Byjus
On the other hand, to reach at point B by covering the least distance, he must take the path
ADB. Displacement is the shortest distance between the initial and final positions. It is a vector
quantity, having both magnitude and direction.
Did You Know?
An instrument called odometer measures the distance travelled by vehicles.
About 15 BC, the Roman architect and engineer Vitruvius mounted a large
wheel of known circumference in a small frame; when it was pushed along
the ground by hand it automatically dropped a pebble into a container at
each revolution, giving a measure of the distance traveled. It was, in effect,
the first odometer.
Question3. A car is moving in a circular path of radius 2 m. Calculate both the distance and the
magnitude of the displacement of the car after i) one complete revolution ii) one-half revolution iii)
one-fourth revolution. What can you conclude about the relationship between distance and
displacement?
3. Time, Average Speed and Velocity
(Refer to video: Time, Average Speed and Velocity)
For a moving body, apart from distance and displacement, it is also important to know how fast
the body is moving. This introduces the concept of speed and velocity.
a. Speed, Average Speed and Instantaneous Speed
Speed of a body is the rate of change of distance with time.
𝑆𝑝𝑒𝑒𝑑, 𝑣 =𝐷𝑖𝑠𝑡𝑎𝑛𝑐𝑒, 𝑠
𝑇𝑖𝑚𝑒, 𝑡
When a body covers equal distances in equal intervals of time, it is said to have a uniform
speed; else it has a non-uniform or variable speed.
Speed is a scalar quantity. To specify the speed of an object, we require only its magnitude.
Its SI unit is m/s.
Now we are going to learn how instantaneous speed differs from average speed!
When a cop pulls you over for speeding, it’s because of your instantaneous speed, or speed
at which you were driving at that particular instant. This is different from your average
speed, which takes into account how long it took you to complete your journey and the
distance you traveled. In the course of entire journey you might have over-sped, sometimes
5
IX – Std. Motion – Class notes I
©Byjus
you might have halted. However, measuring average speed assumes that you travelled at
the same speed for the entire trip.
𝐴𝑣𝑒𝑟𝑎𝑔𝑒 𝑠𝑝𝑒𝑒𝑑, 𝑣𝑎𝑣𝑔 =𝑇𝑜𝑡𝑎𝑙 𝐷𝑖𝑠𝑡𝑎𝑛𝑐𝑒 𝑡𝑟𝑎𝑣𝑒𝑙𝑙𝑒𝑑
𝑇𝑜𝑡𝑎𝑙 𝑡𝑖𝑚𝑒 𝑡𝑎𝑘𝑒𝑛
Question4.What does the speedometer of a vehicle show: average speed or instantaneous speed?
Explain.
Did You Know?
On Saturn, wind speeds can reach as high as 1609 km/h, which is just about
as fast as a speeding bullet. The highest wind speed ever recorded on Earth
during a hurricane was in 1996, during Tropical Cyclone Cynthia when
gusts reached 408 km/h.
b. Velocity
Sometimes speed is not sufficient to describe motion of a body. The rate of motion will be
more complete if it also involves the direction of motion. For this, we define a new term
called “velocity”. Velocity is basically speed of a body moving in a definite direction.
Velocity can be defined as displacement per unit time. It is a vector quantity having both
magnitude as well as direction.
𝑉𝑒𝑙𝑜𝑐𝑖𝑡𝑦 =𝐷𝑖𝑠𝑝𝑙𝑎𝑐𝑒𝑚𝑒𝑛𝑡
𝑇𝑖𝑚𝑒
Just as in case of speed, here also we have average and instantaneous velocity.
𝐴𝑣𝑒𝑟𝑎𝑔𝑒 𝑣𝑒𝑙𝑜𝑐𝑖𝑡𝑦 =𝑇𝑜𝑡𝑎𝑙 𝐷𝑖𝑠𝑝𝑙𝑎𝑐𝑒𝑚𝑒𝑛𝑡
𝑇𝑜𝑡𝑎𝑙 𝑡𝑖𝑚𝑒
For a body whose velocity is changing at a uniform rate, the average velocity is given by
the arithmetic mean of initial velocity and final velocity for a given period of time.
𝐴𝑣𝑒𝑟𝑎𝑔𝑒 𝑣𝑒𝑙𝑜𝑐𝑖𝑡𝑦 =𝐼𝑛𝑖𝑡𝑖𝑎𝑙 𝑣𝑒𝑙𝑜𝑐𝑖𝑡𝑦 + 𝐹𝑖𝑛𝑎𝑙 𝑣𝑒𝑙𝑜𝑐𝑖𝑡𝑦
2=
𝑢 + 𝑣
2
6
IX – Std. Motion – Class notes I
©Byjus
Misconception: The average velocity is given by arithmetic mean of initial and
final velocities.
Clarification: The average velocity is given by arithmetic mean of initial and
final velocities only when it is changing at a constant rate or the acceleration is
constant.
Question5.Under what conditions would the speed of a body be equal to the magnitude of velocity?
Question6.A train takes 2 hrs to reach station B from station A and 3 hrs to return back to A. Stations
A and B are separated by a distance of 400 km. What is the average speed and velocity of the train?
4. Acceleration
(Refer to video: Acceleration)
If a body is in non-uniform motion, its velocity does not remain constant. Acceleration is the
rate of change of velocity with respect to time. It is a vector quantity.
𝐴𝑐𝑐𝑒𝑙𝑒𝑟𝑎𝑡𝑖𝑜𝑛, �⃗� =𝐶ℎ𝑎𝑛𝑔𝑒 𝑖𝑛 𝑣𝑒𝑙𝑜𝑐𝑖𝑡𝑦
𝑇𝑖𝑚𝑒=
𝑣 − 𝑢
𝑡
This is the average acceleration over a period of time t. It is quite possible that the instantaneous
acceleration will be different at different points of time.
If the velocity increases with time, the body is said to be accelerated. Else it is said to be
decelerated (or retarded).
Misconception: Acceleration always occurs in the same direction, as an object
is moving.
Clarification: Acceleration need not be in the same direction as motion. It can
be at any angle to the velocity.
Did You Know?
The thrill of roller coasters is not due to their speed, but rather due
to their accelerations and to the feelings of weightlessness and
weightiness that they produce. Roller coasters are all about
acceleration; that's what that make them thrilling!
7
IX – Std. Motion – Class notes I
©Byjus
Question7.How uniform acceleration differs from non-uniform acceleration?
When a body falls freely under gravity, the acceleration produced in the body is called the
acceleration due to gravity (g). The average value of g near earth’s surface is 9.8 m/s2 or 10
m/s2 and it always act towards center of earth.
Question 8.A car is moving with a velocity of 40 m/s. The brakes are applied to retard it at a rate of 2
m/s2. What will be its velocity after 5 s of applying the brakes?
Did You Know?
The value of acceleration due to gravity is not constant. It varies with depth as well as altitude. Even on earth’s surface, it is more at the poles compared to the equator.
5. Motion Visualized
(Refer to video: Motion Visualized)
Till now we have described motion mathematically. But this mathematical representation does not
help us visualize the motion; hence we switch to the graphical approach, which uses the coordinate
system to represent the motion.
Independent variable (time) is measured on the x-axis while the dependent variable (displacement,
velocity, acceleration etc.) is measured on the y-axis. Basically it shows the variation of dependent
quantity with independent quantity.
Figure 3: Graphical Representation of a Quantity
Question 9.What do you mean by slope of a graph? What is its physical significance?
8
IX – Std. Motion – Class notes I
©Byjus
a. Displacement-Time Graph
The slope of the displacement-time graph gives the velocity of the object.
i) Body at Rest
Figure 4: Body at Rest
Question 10.How will the displacement time graph of two bodies – one having greater velocity and the
other having less velocity (both velocities being constant) look like?
ii) Body moving with non-uniform velocity
Instantaneous velocity at A = tan θ
Figure 5: Body moving with positive acceleration
Question 11.How will the displacement time graph of a body moving with a non-uniform velocity and
negative acceleration?
b. Velocity-Time Graph
The slope of the velocity-time graph gives the acceleration of the object.
i) Uniform Velocity
9
IX – Std. Motion – Class notes I
©Byjus
Figure 6: Uniform Velocity
i) Uniform Acceleration
Figure 7: Uniform Acceleration
The area under the velocity-time graph gives the displacement during that time.
Figure 8: Area under Velocity-Time Graph
Question 12.The following graph shows the velocity-time graph of a body. Plot the corresponding
displacement-time and acceleration-time graphs.
10
IX – Std. Motion – Class notes I
©Byjus
6. The Equations of Motion
(Refer to video: The Equations of Motion)
For bodies moving with a constant acceleration, the motion is guided by the following three
equations:
Figure 9: Body with Uniform Acceleration
First equation of motion:
𝑣 = 𝑢 + 𝑎𝑡
Second equation of motion:
𝑠 = 𝑢𝑡 +1
2𝑎𝑡2
Third equation of motion:
𝑣2 = 𝑢2 + 2𝑎𝑠
Motion can either be 1-D (if the object moves in a straight line), 2-D (if it moves in a plane along a
curved path) or 3-D (if it moves in space).
Misconception: If an object has zero velocity, its acceleration is also zero.
Clarification: If an object has zero velocity, its acceleration need not necessarily be
zero. Think about a ball thrown upwards
11
IX – Std. Motion – Class notes I
©Byjus
It is very important to note that the equations of motions can only be used when acceleration is constant.
Question 13.A balloon starts from the ground and moves vertically upwards with an acceleration of 2
m/s2. After 5s, a stone is released from the balloon. Find the time taken by the stone to reach the ground.
Also calculate the net distance covered and displacement of the stone from the moment it is
released.
7. Uniform Circular Motion
(Refer to video: Uniform Circular Motion)
Uniform circular motion can be described as the motion of an object in a circle at a constant speed.
As an object moves in a circle, it is constantly changing its direction. At all instances, the object is
moving tangent to the circle.
Figure 10: Uniform Circular Motion
𝑆𝑝𝑒𝑒𝑑 =2𝜋𝑅
𝑇
Misconception: The velocity of a body is constant in uniform circular motion.
Clarification: The speed of a body is constant in uniform circular motion; not the
velocity.
Question 14.What can you say about the acceleration of a body undergoing uniform circular motion?
Did You Know?
The acceleration of a body in uniform circular motion is called
centripetal acceleration. Centripetal simply means “center
seeking”! It is always directed towards the center and is directly
proportional to square of velocity.
Question 15.A cyclist goes around a circular track once every 2 minutes. If radius of the circular track
is 110 m, calculate the speed of cyclist. What is his average velocity?
13
IX – Std. Motion – Homework
©Byjus
Instructions: This booklet given to you is your Homework Sheet. Solve these problems at home. You
shall be exam-ready if you can finish all the problems.
1. A body covers some distance along a curved path. Can it have a zero average velocity?
2. A body covered a distance of ‘x’ meters along a semicircular path. Calculate the magnitude of
displacement of the body and the ratio of the distance covered to the displacement?
3. A boy runs for 10 minutes at an uniform speed of 18 km/h. At what speed should he run for the
next 20 minutes so that the average speed comes 12 km/h?
4. How does average velocity differ from instantaneous velocity? Explain with a velocity time
graph.
5. David goes from his home to school at a uniform speed of 𝑢 m/s and returns back at 𝑣 m/s. If
the distance between his home and school is 𝑑 meter, find his average speed and average
velocity.
6. Brakes are applied to a car so as to produce a retardation of 5 m/s2. If the car takes 1.5 s to stop
after applying the brakes, calculate the distance travelled by it?
7. A person walks along the sides of a square field each side is 200 m long. What can be the
maximum and minimum displacement of the person?
8. Two stones are thrown vertically upwards simultaneously with their initial velocities 𝑢1 and 𝑢2
respectively. Prove that the heights reached by them would be in the ratio of 𝑢12: 𝑢2
2.
9. Which of the two bodies (A and B) has
A) Greater velocity
B) Greater acceleration
10. A body starts from rest and moves with a uniform acceleration of 5 m/s2 for 5 s and then it
moves with a constant velocity for 4 s. Later it slows down and comes to rest in 5 s. Draw the
velocity graph for the motion of the body. Also calculate its net displacement.
11. The velocity-time graph of a body is shown below.
14
IX – Std. Motion – Homework
©Byjus
How can we calculate its average velocity? Can we use the formula 𝑣𝑎𝑣 =𝑢+𝑣
2 to calculate the
average velocity?
12. A cyclist moving on a circular track of radius 50 m completes one revolution in 4 minutes.
What is his
A) Average speed
B) Average velocity
in one full revolution?
13. A ball is dropped from a building of height ℎ meter. Calculate the distance travelled by it in
𝑛𝑡ℎ second.
14. Differentiate between
A) Distance and displacement
B) Speed and velocity
15. What can you say about the speed, velocity and acceleration of a body undergoing uniform
circular motion?
16. Which of the following quantities can be obtained from a velocity-time graph?
I. Velocity
II. Displacement
III. Acceleration
A) I and II
B) II and III
C) I and III
D) I, II and III
17. In which of the following cases will the displacement be equal to distance?
A) Earth revolving around sun
B) Pendulum moving to and fro
C) Car moving in a straight line
D) None of these
18. If the displacement of a body is directly proportional to square of time, the object moves with
A) Uniform velocity
B) Uniform acceleration
C) Increasing acceleration
D) Decreasing acceleration
15
IX – Std. Motion – Homework
©Byjus
19. The maximum height to which a body will rise if thrown with an initial velocity is
A) 𝑢/𝑔
B) 𝑢2/𝑔
C) 𝑢2/2𝑔
D) 𝑢/2𝑔
20. Slope of an acceleration-time graph gives us
A) Velocity
B) Displacement
C) Jerk
D) None of these
17
IX – Std. Laws of Motion – Class notes
©Byjus
Instructions: This booklet given to you is your Class Notes. Keep filling this sheet as the class
proceeds. At the end of this session, you will have your notes ready.
1. Introduction
(Refer to video: Basics)
Question 1.When you slap someone, in physics terms, you should not feel sorry. Can you think why?
c. Concept of Force
A body is said to be in motion if it changes its position with respect to the frame of
reference; else it is said to be at rest. We already have learnt about the equations, which
guide the motion of anybody moving with constant acceleration. But what exactly causes
this motion? Do all motions require a cause? How can you bring a change in the state of
motion? In this chapter, we are going to learn about the laws that govern this motion. The
applications of these laws of motion are truly limitless.
For years “rest” was thought to be the natural state of motion. Aristotle put forward this
concept that all bodies have a tendency to come to rest eventually and a force is required to
keep the body moving. However, later this theory was proved wrong.
In the most basic terms force can be defined as a push or a pull on an object. Whenever
there is an interaction between two objects, there is a force upon each of the objects. When
the interaction ceases, the two objects no longer experience the force.
Force is a vector quantity, having both magnitude as well as direction. Its SI unit is Newton
(N). When a number of forces act on a body, there comes the concept of resultant force,
which can either be balanced or unbalanced.
d. Balanced and Unbalanced Forces
If the resultant of all forces acting on a body is zero, forces are said to be balanced. If the
resultant doesn’t sum up to zero, forces are said to be unbalanced.
It is important to note that as force is a vector quantity, it must be added vectorially to find
the resultant force.
Figure 11: Balanced and Unbalanced Forces
Newton put forward three laws of motion, which define the motion of bodies.
18
IX – Std. Laws of Motion – Class notes
©Byjus
2. First Law of Motion
(Refer to video: First Law of Motion)
a. Galileo’s Experiment
Galileo was the first person to conclude that even when the force applied to set a body in
motion is withdrawn, it will remain in motion provided no other restraining force acts on
it. Newton's first law of motion relies on Galileo's thoughts about motion according to
which a force is not needed to keep an object in motion.
Figure 12: Galileo’s Experiment
Question 2.A ball when slid on a horizontal surface eventually comes to a stop, even though
seemingly no force is acting on it. Doesn’t this contradict Galileo’s statement?
Newton formulated this concept in form of Newton’s first law of motion.
b. 1st Law of Motion
According to Newton's First Law of motion, an object will remain at rest or in uniform
motion in a straight line unless acted upon by a net unbalanced external force.
Figure 13: Newton’s 1st Law of Motion
The property of a body by virtue of which it resists a change in its state of motion is known
as inertia. It is an inherent property of each body. All objects have this tendency - they have
inertia. But not all objects have the same magnitude of this tendency! Mass is the quantity
that determines the inertia of a body. A more massive object has a greater tendency to resist
change in its state of motion and hence greater inertia.
Newton’s 1st law is also known as Law of Inertia.
19
IX – Std. Laws of Motion – Class notes
©Byjus
Misconception: If an object is at rest, no forces are acting on the object.
Clarification: If an object is at rest, forces might be acting on it, but their
net result is zero i.e. they are balanced forces.
Question 3.Suppose two bodies of mass 2 kg and 10 kg are placed on a frictionless surface. The force
required to move either of them is the same. Does that mean both bodies have same inertia? Give
reasons for your choice.
Did You Know?
Newton’s laws of motion are also valid for liquids and
gases. And that is why dizziness occurs after getting out of
the elevator, as blood in the body keeps moving down even
after the elevator stops.
Question 4.Why is it so that when a bus suddenly starts moving, the passengers tend to fall backward
and when it stops suddenly, the passengers tend to lean forward?
Question 5.If an elephant was chasing you, its enormous mass would be most threatening. But if you
moved in a zigzag path, its big mass would become your advantage. Why?
Many other day-to-day phenomena can be explained using the concept of inertia and
Newton’s first law of motion:
On shaking a tree, the fruits fall down.
On striking a pile of coins in a game of carrom, only the bottom most coin moves
while the rest of the pile remains intact.
An athlete often runs before taking a long jump
When a person jumps out of a moving train, he falls down
In order to remove dust from a carpet and clean it, it is beaten with a stick.
Now let’s discuss what the second law of motion is and how it provides a quantitative
measure of the net force acting on a body.
3. Second Law of Motion
(Refer to video: Second Law of Motion)
a. Linear Momentum
Linear momentum is one of the quantities that measure the motion of a body. It is defined
as the product of an object’s mass, m, and its velocity, v and is denoted by the letter 𝑃⃗⃗⃗⃗ .
20
IX – Std. Laws of Motion – Class notes
©Byjus
�⃗⃗� = 𝑚�⃗�
Momentum is a vector quantity. A body’s momentum is always in the same direction as
its velocity. The SI unit of momentum is kg-m/s.
b. Change of momentum and 2nd Law
Figure 14: Graphical Representation of Newton’s 2nd Law of Motion
According to Newton’s 2nd law of motion, the net external force applied on a body is
equal to the rate of change of its momentum.
�⃗� =�⃗⃗�
𝑡
But
�⃗⃗� = (𝑚�⃗�)
If 𝑚 is constant,
�⃗⃗� = 𝑚�⃗�
�⃗⃗�
𝑡= 𝑚
�⃗�
𝑡
But we know that, �⃗� =�⃗⃗�
𝑡
Hence,
𝑅𝑎𝑡𝑒 𝑜𝑓 𝑐ℎ𝑎𝑛𝑔𝑒 𝑜𝑓 𝑚𝑜𝑚𝑒𝑛𝑡𝑢𝑚 = 𝑚�⃗�
Misconception: As per 2nd law of motion, 𝐹 = 𝑚𝑎
Clarification: This is valid only when mass is constant. However this force
is always equal to rate of change of momentum, irrespective of whether
mass is constant or not.
Question 6.While catching a ball, the cricketer withdraws his hands. Does this reduce the momentum
change of the ball? How is it advantageous?
Question 7.How do airbags reduce damage to the passengers during an accident?
21
IX – Std. Laws of Motion – Class notes
©Byjus
Misconception: The motion of a body is always in the direction of net
external force applied to the object.
Clarification: It’s not the motion, but the change in momentum that is
always in the direction of net external force applied to a body.
Question 8.A rightward force of 302 N is applied to a 28.6-kg crate resting on the floor. If the
coefficient of friction between the crate and the floor is 0.750, find the acceleration of the crate.
Question 9.As a rocket is fired from a launch pad, its speed and acceleration increase with time as its
engines continue to operate. Explain why this occurs even though the thrust of the engines remains
constant.
4. Conservation of Momentum
(Refer to video: Conservation of Momentum)
Before we learn about conservation of momentum, it is important to understand what a
system is and once we define a system, what internal and external forces are.
A system is a portion of the universe chosen for analysis. Everything outside of the system is
known as the surrounding.
Suppose we have three bodies A, B and C. If we choose A and B as our system, any force that
these bodies exert on each other is an internal force. While any force exerted on the system by
C or any other body outside the system is an external force.
Figure 15: Concept of System
We know that,
�⃗�𝑒𝑥 = 𝑅𝑎𝑡𝑒 𝑜𝑓 𝑐ℎ𝑎𝑛𝑔𝑒 𝑜𝑓 𝑚𝑜𝑚𝑒𝑛𝑡𝑢𝑚
If F⃗⃗ex = 0,P⃗⃗⃗ = 0, i.e. the momentum remains conserved.
According to law of conservation of momentum, the total momentum of a system remains
conserved if no external forces act on it.
Misconception: During conservation of momentum, we need to take algebraic
sum of momenta.
Clarification: Since momentum is a vector quantity, we need to take vector
sum of momenta to calculate the net momenta.
22
IX – Std. Laws of Motion – Class notes
©Byjus
For an isolated system of two bodies,
𝑚𝐴�⃗⃗�𝐴 + 𝑚𝐵 �⃗⃗�𝐵 = 𝑚𝐴�⃗�𝐴 + 𝑚𝐵�⃗�𝐵
Figure 16: Conservation of Momentum during Collision of Two Bodies A and B
Question 10.Two bullets, travelling in opposite directions with a speed of 500 m/s and 250 m/s
collide with a stationary block of mass 12kg. If the bullets stick to the block and they move together,
find the final velocity of the system. Assume surface to be frictionless.
Misconception: During collision, total energy is conserved before and after
collision.
Clarification: During collision, total momentum remains conserved, if no
external forces are acting. Energy remains conserved only in some special
cases.
Did You Know?
In an explosion, an internal impulse acts in order to propel the parts
of a system into a variety of directions. After the explosion, the
vector sum of momenta of individual parts of the system equals the
momentum before explosion. Explosion is similar to reverse of
collision!
5. Third Law of Motion
(Refer to video: Third Law of Motion)
a. Action, Reaction and 3rd Law
The third law of motion explains how a force acts on an object. It states that, to every
action there exists an equal and opposite reaction. And these forces act on two different
bodies.
In the interaction of two bodies A and B,
23
IX – Std. Laws of Motion – Class notes
©Byjus
�⃗�𝐴𝐵 = −�⃗�𝐵𝐴
Figure 17: Interaction between Two Bodies A and B
Question 11.Do action and reaction forces act simultaneously? Explain.
Question 12.Can you walk on a frictionless surface? Why / Why not?
Examples of action-reaction forces:
i) Firing a bullet from a gun:
Figure 18: Recoil of a Gun
ii) Rocket propulsion
Figure 19: Propulsion of Rocket
iii) Swimming – Person pushes water backwards. In turn, water pushes him/her
forward.
Misconception: In an interaction between two bodies, the more massive
object exerts a greater force than the less massive object.
Clarification: The force exerted by both the bodies is equal in magnitude.
However the less massive body will have greater acceleration.
24
IX – Std. Laws of Motion – Class notes
©Byjus
Question 13.When a horse exerts a force on cart, the cart exerts an equal and opposite force on the
horse. Then how come the horse can manage to pull the cart?
Did You Know?
As per Newton’s 3rd law of motion, a single isolated force can’t
exist in nature. Forces always exist in pairs!
b. Newton’s Second Law as the Fundamental Law
As per 2nd law of motion,
�⃗� =�⃗⃗�
𝑡
If mass is constant,
�⃗� = 𝑚�⃗�
If �⃗� = 0, �⃗� = 0
This is basically the first law of motion.
If
�⃗� = 0, �⃗⃗� = 0
This means that momentum remains conserved, which is the law of conservation of
momentum.
Question 14.Can you arrive at Newton’s 3rd law using Newton’s 2nd law?
c. Limitations of Newton’s Laws of Motion
The scope and applications of Newton’s laws of motion are widely immense. Although
these laws are widely used, they don’t always work. These are basically approximation of
realities.
The frames of references where Newton’s laws hold true are known as inertial frames of
reference. Any frame of reference that is at rest or moving with a constant velocity with
respect to an inertial frame of reference is also inertial. While those in which Newton’s
laws don’t hold true are known as non-inertial frames of reference.
25
IX – Std. Laws of Motion – Class notes
©Byjus
Did You Know?
In non-inertial frames of reference, some 'extra forces' have
to be invoked to retain Newton's laws of motion. These
forces are known as fictitious forces or pseudo forces.
Newton’s laws of motion fail in the following conditions:
i) At quantum level. e.g. to explain motion of electrons around nucleus
ii) When the velocities involved approach the speed of light.
iii) Non-inertial frames (accelerated frames)
27
IX – Std. Laws of Motion – Homework
©Byjus
Instructions: This booklet given to you is your Homework Sheet. Solve these problems at home. You
shall be exam-ready if you can finish all the problems.
1. An object experiences a net zero external unbalanced force. Is it possible for the object to be
travelling with the non-zero velocity? If yes, state the conditions that must be placed on the
magnitude and direction of the velocity. If no, provide a reason.
2. When a carpet is beaten with a stick, dust comes out. Explain, why?
3. Why is it advised to tie any luggage kept on the roof of a bus with a rope?
4. Using a horizontal force of 200 N, we intend to move a wooden cabinet across a floor at
constant velocity. What is the force of friction that will be exerted on the cabinet?
5. The change in momentum of a body in 0.01 s is 10kg m/s. Find the force acting on this body.
6. Why is it easier to stop a tennis ball than a cricket ball moving with same speed?
7. Akash experienced a net force of 1800 N at the bottom of a roller coaster loop. If his mass is
75 kg, what can you say about his acceleration at this point?
8. A canon of mass 1500 kg fires a shell of mass 15 kg with velocity 150 m/s. Calculate velocity
of recoil of the canon.
9. What do you mean by balanced and unbalanced force? Give examples.
10. When the brakes are applied to the bike the person sitting on the back seat moves forward.
Why?
11. Imagine a block of mass ‘m’ placed on a table. Do the weight of the block and normal form
an action-reaction pair? Why/Why not?
12. What would be the weight of a body of mass 50 kg on the surface of the moon, where g = 1.6
m/s2. What would be its mass?
13. A body of mass 5 kg undergoes a change in speed from 30 to 40m/s. Calculate the increase in
its momentum?
14. If a body is moving towards right, the net force on it must also be towards right. Do you agree
with this statement? Justify.
15. Explain why some of the leaves may get detached from a tree if we vigorously shake its
branch.
16. The two factors on which the momentum of a body depends are ______ and _________.
A) Velocity and time
B) Mass and velocity
C) Mass and distance
D) Mass and velocity
28
IX – Std. Laws of Motion – Homework
©Byjus
17. Momentum of massive object at rest is _______.
A) Very large
B) Very small
C) Zero
D) Not defined
18. An example for a vector quantity is ________.
A) Speed
B) Momentum
C) Distance
D) Length
19. S.I. unit of impulse is ______
A) N-s
B) N-s2
C) Kg-m/s2
D) Kg-m2/s2
20. The momentum of a toy bus of 0.01 kg moving with a velocity of 5 m/s is
A) 0.005 kg m/s
B) 0.05 g m/s
C) 0.005 N s
D) None of these
30
IX – Std. Gravitation – Class notes
©Byjus
Instructions: This booklet given to you is your Class Notes. Keep filling this sheet as the class
proceeds. At the end of this session, you will have your notes ready.
1. Introduction
(Refer to video: The Story of Gravity)
a. Gravitation as a Universal Force
Question 1.We know that we are bound to the Earth because of gravity. How far do you think the
gravitational pull of the earth extends?
Gravity is the universal force of attraction acting between matters. It is one of the four
fundamental forces known in nature, along with the electromagnetic, strong and weak nuclear
forces. Of these forces, gravity is the weakest and thus plays negligible role in determining the
internal properties of everyday matter. On the other hand, gravity is something that keeps us
bound to the ground, keeps the moon circling the earth and the earth circling the sun. It controls
the trajectories of bodies in the universe and the structures and evolution of stars, galaxies and
the whole cosmos.
Many theories have been put forward in an attempt to explain gravity. Galileo (1564-1642) first
explored the motion of falling objects. Isaac Newton (1642-1727) later described the law of
gravity. In this chapter we are going to focus on Newton’s theory of gravitation. As per
Newton’s theory of gravitation, gravity is a force- one that attracts all objects having mass to
all other objects having mass.
Do You Know?
Gravity cannot be fumed off or shielded in any way. Intervening objects
have no effect on the original gravity force between two separated
masses. This means that there is no antigravity chamber available in
which the occupants can continually float freely. Orbiting astronauts
appear weightless because their fall towards the earth is balanced by the
outward directed centrifugal force.
Before we discuss Newton’s law of gravitation, let us first have an insight into the three laws
of planetary motion proposed by Kepler in the early 1600s. Kepler basically summarized the
carefully collected data of his mentor - Tycho Brahe – that described the motion of planets in
the solar system. Kepler's laws paved a way for the development of celestial mechanics, i.e.,
the application of the laws of physics to the motions of heavenly bodies.
b. Kepler’s Laws of Planetary Motion
31
IX – Std. Gravitation – Class notes
©Byjus
Kepler's three laws of planetary motion can be described as follows:
i) Law of Orbits:
This law states that the path of planets around the sun is elliptical in shape, with the
center of the sun being located at one of the two foci of the ellipse.
Figure 20: Law of Orbits
ii) Law of Equal Areas:
As per the law of equal areas, an imaginary line drawn from center of the sun to
center of the planet sweeps out equal areas in equal intervals of time.
Figure 21: Law of Equal Areas
iii) Law of Periods:
The law of periods states that the ratio of the squares of the time periods of any two
planets around the sun is equal to the ratio of the cubes of the semi-major axis of its
orbit.
32
IX – Std. Gravitation – Class notes
©Byjus
Figure 22: Law of Periods
Mathematically it can be expressed as,
𝑇12
𝑇22 =
𝑅13
𝑅23
Question 2.Using Kepler’s laws of planetary motion; prove that the gravitational force is inversely
proportional to the square of the distance. Assume the orbits to be circular.
2. The Universal Law
(Refer to video: The Universal Law)
Next comes Galileo, a 17th century physicist who gave us three basic information, which is a
common knowledge now but wasn’t before his time.
1. All things fall at the same rate irrespective of their mass.
2. Free fall is not a constant velocity motion but an accelerated motion. Anything near
earth falls at the rate of 9.8 m/s2 or 32 ft/s2.
3. Velocity of a body doesn’t change until unless you apply a force.
Isaac Newton, an English Physicist and Mathematician had all these knowledge at his
disposal. That is why he said “If I have seen further, it is by standing on the shoulders of
giants.”
We all know the apple story. But he did not ask the question “Why does apple fall?”. It was
known that earth pulls everything towards it. Rather he asked the question, “ If apple falls,
does the moon also fall?” Answer turned out to be “yes” and he had found that same force is
responsible for falling of the apple and falling of the moon. At that time he had already found
laws of the motion and using Kepler’s 3rd law he found out the force is inversely proportional
to the square of distance between bodies.
33
IX – Std. Gravitation – Class notes
©Byjus
He finally assembled all the information into one single law known as Newton’s Universal
Law of Gravitation. It says ever object having mass attracts every other object having mass
with a force called gravitational force and, Newton’s major accomplishment was not that it
says, Sun attracts the earth or earth attracts the moon or earth attracts earthly things but his
major accomplishment was to say that everything attracts every other thing and that needs
courage to say because there are million ways to prove that wrong if it turned out to be a
wrong theory.
Newton's law of universal gravitation states that any two-point masses in the universe attract
each other with a force that is directly proportional to the product of their masses and inversely
proportional to the square of the distance between them. And it acts along the line joining the
point masses.
𝐹 ∝𝑚1𝑚2
𝑟2
Well, a point mass is a point particle with a nonzero mass and no other properties or structure.
Figure 23: Gravitational Force between Two Point Masses
Eliminating the proportional sign,
𝐹 = 𝐺𝑚1𝑚2
𝑟2
Where, G is the universal gravitational constant. It is numerically equal to the force of attraction
between two point masses each of 1 kg, separated by a distance of 1 m.
G = 6.67 × 10−11Nm2/kg2
Question 3.Why is the gravitational force always attractive in nature?
Uniform spherical bodies (shells or solid spheres) can be considered as point masses and that
their whole mass is concentrated at the center. And the formula for gravitational force between
point masses can be directly used for uniform spherical bodies.
𝐹 = 𝐺𝑚1𝑚2
𝑟2
34
IX – Std. Gravitation – Class notes
©Byjus
Figure 24: Gravitational Force between Two Spherical Bodies
Misconception: There is no gravity at the center of the Earth.
Clarification: There is gravity everywhere; even at the center of the earth.
However, if you were at the center of the Earth you would feel weightless. This is
because all the forces on you that result from the Earth's gravity are balanced.
Do You Know?
Gravitational attraction does not depend on the composition of bodies;
it depends only on their mass. Several blocks composed of glass, tin,
ice, or, any other material, if they all have equal mass, they will attract
any other given body with the same gravitational force.
Question 4.If the mass of a satellite orbiting the Earth is doubled, how should its speed vary so that
radius of the orbit remains unchanged?
Question 5.Why aren’t we attracted to each other, even though gravitational force acts between us?
Do You Know?
The Cavendish experiment was the first experiment that measured the
force of gravity between masses in the laboratory and also yielded
accurate value for the gravitational constant G. British scientist Henry
Cavendish performed it in 1797-1798. And he named his paper,
“Weighing the Earth” as once value of G is known, we can easily find,
Mearth i.e. mass of the earth.
35
IX – Std. Gravitation – Class notes
©Byjus
Question 6.Two planets of mass ‘m’ and ‘16m’ and radii ‘r’ and ‘2r’ are separated by a distance of
‘10r’. Determine the point where a particle of some mass will not experience any gravitational
force.
Now that we have a qualitative and quantitative idea of gravitational force, let’s examine the
motion of the only natural satellite of the earth! The Moon!
3. The Moon’s Falling
(Refer to video: The Moon’s Falling)
a. Moon Orbiting the Earth
Two bodies attract each other with the same gravitational force. However, a falling apple does
not affect the earth at similar scales (The earth doesn’t seem to move towards the apple). On
the other hand, the moon does affect the earth. High and low tides are caused because of
gravitational pull of the moon.
Question 7.What is the reason for this difference in behavior that we see only lighter body getting
accelerated towards the heavier body?
The moon moves around the earth in nearly circular orbits with some speed.
Figure 25: Moon Rotating around the Earth
The forces of speed and gravity keep the Moon in a constant orbit around Earth. With the right
combination of speed and gravity, satellites (here Moon) can fall around the body, instead of
into the body that they orbit (here Earth).
The gravitational force between the earth and moon provides the necessary centripetal force to
the moon to keep it moving in circular path. And because of its velocity (there is no friction to
slow down its motion) it doesn’t collapse into the earth.
b. Centripetal force
For any object to move in a circular path, it requires some centripetal (i.e. center seeking) force.
Any real force like tension, normal or gravitational force, can provide this force.
36
IX – Std. Gravitation – Class notes
©Byjus
Figure 26: Centripetal Force
e.g. when we rotate a stone tied to a string, it’s the tension in the string that provides the required
centripetal force.
Misconception: Centripetal force is a new type of force that acts on a body.
Clarification: Centripetal force is not a new type of force like gravitational force
or electrostatic force. Any center seeking force can be called as centripetal force.
Question 8.What will happen if the string to which the stone is tied is suddenly snapped? Justify
your answer from both ground’s and stone’s frame of reference.
4. Free fall, Weight and Mass
(Refer to video: Free Fall, Weight and Mass)
a. Free Fall and Acceleration due to Gravity (g)
Imagine if you drop two balls, one heavier and other lighter, both of them at the same time and
from the same height. Which would hit the ground first? Would it be the heavier one because
it weighs more? Or would they both hit the ground at the same time?
A body is said to be in free fall if the only force acting on it is the force of gravity. All bodies,
whether heavy or light, fall at the same rate near the earth’s surface; provided we neglect air
resistance. Free fall is any motion of a body where the only force acting upon it is gravity.
For a freely falling body, we can apply equations of motion to analyze its motion. A constant
acceleration acts in the downward direction (i.e. the acceleration due to gravity). Here we have
made an assumption that the body is near the Earth’s surface and air drag is negligible.
𝑣 = 𝑢 + 𝑎𝑡
𝑠 = 𝑢𝑡 +1
2𝑎𝑡2
𝑣2 = 𝑢2 + 2𝑎𝑠
37
IX – Std. Gravitation – Class notes
©Byjus
It is important to note that we will take acceleration, ′𝑎′ to be positive when it is in the direction
of the velocity and negative when it opposes the motion.
For a body near the surface of earth,
𝑚𝑔 = 𝐺𝑀𝑚
𝑟2
Or,
𝑔 =𝐺𝑀
𝑟2
This indicates that the acceleration of a freely falling body near earth’s surface does not depend
on the mass of the body. This is known as acceleration due to gravity.
Substituting 𝐺 = 6.67 × 10−11 𝑁𝑚2𝑘𝑔2, 𝑀 = 6 × 1024 𝑘𝑔 and, 𝑟 = 6400 𝑘𝑚,
we get,
𝑔 = 9.8 𝑚/𝑠2
Misconception: Heavier objects fall at a faster rate near earth’s surface.
Clarification: All objects, irrespective of their mass, fall at the same rate near
earth’s surface (provided we neglect air drag and any other resistive force).
Question 9.Two bodies A and B are dropped from two towers of heights 5 m and 10 m respectively.
Calculate the ratio of time taken by them to hit the ground.
b. Weight and Mass
Although mass and weight are somewhat related, they are not the same entity! Mass, as we
know, is a measure of inertia, i.e. the resistance that it offers to a change in its state of motion.
More the mass; more is the inertia. On the other hand, the force of attraction of the earth on an
object is known as the weight of the object.
Do You Know?
The human body can handle increased g-forces as seen in activities such
as dragster races, airplane acrobatics and space training. But if you go
beyond 4g or 5g it becomes very uncomfortable for us. The highest
known acceleration voluntarily experienced by a human is 43 g by g-
force pioneer John Stapp.
Question 10.How does mass differ from weight?
We know that the weight of a body on moon is only 1/6th of its weight on earth. The weight of
a body varies even on earth’s surface. Due to flattening of the earth at poles, a body weighs
more at the poles as compared to equator.
38
IX – Std. Gravitation – Class notes
©Byjus
Question 11.Although we say that the mass of a body is constant, it is not entirely true. Under what
circumstances will the mass of a body vary?
c. Weightlessness
While the actual weight of a body is determined by its mass and the acceleration due to gravity,
one's “effective weight” is different from actual weight. E.g. for a person standing on the floor,
the effective weight comes from the fact that he is supported by floor (here normal).
If all support is removed suddenly and the person begins to fall freely, he feels suddenly
"weightless". The state of weightlessness can be achieved in several ways, all of which involve
significant physical principles. Weightlessness occurs when uniform gravity acts solely by itself
i.e. gravity is the only force acting on the body.
E.g. you may feel weightless in an aircraft when it is accelerating downwards with an
acceleration of g.
Do You Know?
Some bacteria become nastier in space. E.g. salmonella, the bacteria
that commonly causes food poisoning, becomes three times more
virulent in microgravity, posing a major concern.
Question 12. We all enjoy roller coasters for the acceleration and weightlessness they provide.
Considering the path of a roller coaster as the segment of a circle, derive the condition for
weightlessness.
40
IX – Std. Gravitation – Homework
©Byjus
Instructions: This booklet given to you is your Homework Sheet. Solve these problems at home. You
shall be exam-ready if you can finish all the problems.
1. a) State the universal law of gravitation. Can the gravitational force between two bodies be
repulsive in nature? Justify your answer.
b) What will happen to the force of gravitation between two objects A and B if the distance
between them is doubled?
2. How is the gravitational constant defined? What is its value on earth? How is its value
different on the surface of moon?
3. State all the three Kepler’s laws.
4. What is the importance of universal law of gravitation? Why is the gravitational force
insignificant between ordinary bodies?
5. What is acceleration due to gravity? Does its value remain constant on earth’s surface?
6. Show that a body weighing 6 N on earth weighs just 1 N on the moon. Does its mass also
become one-sixth? Why or why not?
7. a) What is free fall? Write the modified equations of motion for a freely falling body.
b) Two bodies of mass 10 kg and 12 kg are falling freely. What is the acceleration produced
in the bodies due to force of gravity?
8. Differentiate between weight and mass of a body.
9. A ball is thrown vertically upwards with an initial velocity of 9.8 m/s. Calculate
a) Time taken before it reaches the ground again
b) Maximum height achieved
10. What are the similarities and differences between gravitational force, magnetic force and
electrostatic force?
11. If apple also attracts the earth according to Newton’s 2nd law, then does earth also accelerate
towards the apple? Explain why/why not?
12. A stone is dropped from the edge of the roof. It passes a window 2 m high in 0.1 s. How far is
the roof above the window? Take g = 10m/s2
13. Where do we observe the maximum value of the gravitational acceleration, at Equator? or at
Poles? or on Mt Everest top? or in a coal mine? Explain.
41
IX – Std. Gravitation – Homework
©Byjus
14. A particle of mass m1 is kept at x = 0 and another of mass m2 at x = d. When a third particle
is kept at x = d/4, it experiences no net gravitational force due to the two particles. Find
m2/m1.
15. How are ocean tides caused?
16. A ball is thrown with an initial velocity of 20m/s. Find the time of flight and the maximum
height reached by the body? (g= 10 m/s-2)
A) 4s, 20m
B) 5s, 25m
C) 6s, 36m
D) Can’t say
17. The weight of an object in a satellite orbiting the earth is
A) Equal to its weight on earth’s surface
B) Somewhat less than its weight on earth’s surface
C) More than its weight on earth’s surface
D) Zero
18. For a body thrown vertically upwards,
A) Time of ascent > Time of descent
B) Time of ascent < Time of descent
C) Time of ascent = Time of descent
D) Depend on the initial velocity
19. The force of gravity on a body varies slightly from place to place on the earth for two reasons.
(i) shape of earth and (ii)
A) Rotation of earth
B) Mass of earth
C) Circumference of earth
D) None of these
20. In order to derive the law of gravitation, Newton assume that the moon’s orbit is?
A) Elliptical
B) Circular
C) Parabolic
D) Regular
43
IX – Std. Atomic Structure – Class notes II
©Byjus
Instructions: This booklet given to you is your Class Notes. Keep filling this sheet as the class
proceeds. At the end of this session, you will have your notes ready.
1. Introduction
What is all matter made up of?
Before we get into what an atom is, and what we mean by atomic structure, look around you.
You will find buildings, lots and lots of them. Now you know that these buildings are basically
made up of bricks and cements, so we can say that the buildings are made up of bricks. But
have you ever thought about what makes up a brick?
a. Early Models of Atom
(Refer to video clip - Introduction, subtopic - Introduction)
Democritus, an ancient Greek philosopher, believed that if we keep dividing, say a
piece of bread into smaller pieces and again, divide the smaller piece into even
smaller pieces, we will reach a situation where the particle can’t be divided
anymore. Democritus named these particles Atomos (meaning indivisible).
Similar idea was declared by Maharishi Kanada of India and he named these
indivisible particles paramanu.
Aristotle dismissed these theories by saying that “seeing is believing”, and since
these atomos couldn’t be seen, Democritus’ theory was wrong.
b. Dalton’s Atomic Theory
(Refer to video clip - Introduction, subtopic - Introduction)
First scientific theory about the structure of atoms was proposed by John Dalton in
the year 1808.
Write down Dalton's Atomic Theory
Question1. Mention drawbacks of Dalton’s atomic theory.
2. Sub-Atomic Particles
The early models of atom portrayed the atom as an indivisible particle. But these models were
either hypothesis or theories that couldn’t be proved. This caused a seed of doubt to be planted.
Were these atoms really “indivisible”?
a. Discovery of Electrons
(Refer to video clip - Introduction, subtopic - Discovery of electrons)
The first person to disprove Dalton’s atomic theory was J. J. Thomson. In the year
1897, Thomson conducted an experiment inside a cathode ray tube. Thomson passed
electricity at high voltage through a gas at very low pressure. Streams of particles were
discharged from the cathode that produced luminescence on the other side of the CRT.
By conducting this experiment with various gases, he made some conclusions
What are the conclusions made by J. J. Thompson?
b. Thomson’s Model of the Atom
(Refer to video clip - Introduction, subtopic - Discovery of electrons)
44
IX – Std. Atomic Structure – Class notes II
©Byjus
Thomson, in the year 1903, proposed a model to explain the structure of atom. Note
that at this point of time only protons and electrons had been discovered. He suggested
that the structure of atom resembled that of a plum pudding or a watermelon. The seeds
or plum were the negatively charged particles that were embedded on a positively
charged sphere (pudding or watermelon).
Figure 27 - The Plum-Pudding model
Question2. Why was the Plum-pudding model unsuccessful?
c. Discovery of Protons
It was only a matter of time before someone realized that the atom must be having some
positive particles as the atom as a whole is neutral. E. Goldstein performed a very
similar experiment to J. J. Thomson. When he passed electricity at high voltage
through a gas at low pressure, he observed that streams of heavy particles were given
out by the anode.
List down the observations made by E. Goldstein -
Question3. Why did the mass and charge of anode rays depend on the gas taken whereas the cathode
rays’ properties were independent of the gas taken?
Question4. What do you think is the difference between anode and cathode rays?
3. Radioactivity
(Refer to video clip - Radioactivity, subtopic - Radioactivity I)
Most of the elements around us are stable, but there are elements which are unstable and hence
disintegrate. The nucleus of such atoms undergoes change along with discharge of certain
particles. These particles are called alpha, beta and gamma particle. Alpha particles are
positively charged particles with a mass of 4u, beta particles are negatively charged particles
with negligible mass and gamma particles are pure radiations and hence do not carry any charge
or mass.
45
IX – Std. Atomic Structure – Class notes II
©Byjus
Question5. Write down the properties of Alpha and beta particles.
a. Rutherford’s Gold-Foil Experiment
(Refer to video clip - Rutherford’s Model)
After the discovery of the sub-atomic particles, the first part of puzzle was solved.
Finally we knew what constituted an atom. But did we know how these sub-atomic
particles were arranged inside an atom? Rutherford was the first to answer this with the
help of his Gold-foil experiment in 1911. The setup of his experiment is shown below:
Figure 28 - Gold-Foil Experiment
Note down the observations made by Rutherford with respect to the gold foil experiment-
b. Discovery of Nucleus
(Refer to video clip - Rutherford’s Model)
In 1932, James Chadwick noticed that all the mass of an atom could not be accounted
for on the basis of only protons and electrons present in it. For example, a carbon atom
contained 6 protons and 6 electrons and should ideally have a mass of 6u. But
experiments showed that the mass of Carbon atom was 12u. What did this mean? It
meant that there were other subatomic particles which were neutral and had appreciable
mass. He named these particles as Neutrons
Did you know?
Nearly one hundred percent of the mass of an atom (99.94%) is
contained in the nucleus.
46
IX – Std. Atomic Structure – Class notes II
©Byjus
Question6. How is a neutron different from an electron?
Question7. What are the similarities and differences in the properties of electrons and protons?
Misconception: Atom is a solid entity with definite boundaries as shown in various
figures.
Clarification:Atoms are 99.99% free space with the remaining 0.01% being the
nucleus. If the size of an atom were imagined to be a football field, the nucleus would
be equivalent to a football placed in the pitch. Also, an atom doesn’t have any definite
boundaries. Its radius is defined as the distance of the outermost shell from the
nucleus.
Rutherford’s model helped gain very important insights. It was the first to suggest the concept
of a concentrated nucleus. According to Rutherford, the mass and positive charge of the atom
was concentrated in a small portion called nucleus, located in the center of atom. Ideally,
bundling up the positive charges together should have had made the nucleus unstable, but
somehow, the nucleus managed to remain stable.
Question8. The nucleus is comprised of densely packed positively charged protons which should repel
each other. What is the force that keeps the nucleus together?
Later it was found that some elements had unstable nucleus which eventually disintegrated
giving away alpha and beta particles. After numerous experiments, the scientists were able to
obtain a relationship between elements which often disintegrated and the ratio of protons to
neutrons they had.
4. Neils Bohr’s Model
(Refer to video - Neil Bohr’s Model)
Neil Bohr went a step further with his model, in 1913.He suggested, in addition to a
concentrated nucleus, the electrons revolved around in stationary orbits. The main postulates
of his theory were:
Write down the postulates in the space given below -
According to Bohr, the atomic structure was very similar to our solar system in which the
nucleus formed the central sun with the electrons revolving around. He named these shells or
orbits as K, L, M, N, etc.
47
IX – Std. Atomic Structure – Class notes II
©Byjus
Figure 3 - Bohr's Atomic Model
Bohr intentionally named the shells as K, L, M, etc., and not A, B, C, etc., because he wasn’t
sure if these were the only shells and hence, wanted space on either side for any future
possibilities.
In 1921, Bohr and Bury gave some laws for distribution of electrons in various orbits, which
are now called Bohr-Bury Scheme.
Main points of the Bohr-Bury scheme are:
Question9. What were the limitations of the Bohr’s atomic model?
This can be understood with the help of some examples. The electronic configuration of
Helium having 2 electrons and that of Carbon having 6 electrons are shown below.
Figure 4 - Atomic Structure of Helium Figure 5 -Atomic Structure of Carbon
Question10. Write down the electronic configuration of Lithium(3 electrons), Chlorine(17 electrons)
and Potassium(19 electrons).
Did you know? There are 254 known stable isotopes and 80 elements which have at least one stable
isotope. Twenty-six elements only have one stable isotope. These elements are called
monoisotopic.
50
IX – Std. Atomic Structure – Homework
©Byjus
Instructions: This booklet given to you is your Homework Sheet. Solve these problems at home. You
shall be exam-ready if you can finish all the problems.
1. List the main postulates of Dalton’s atomic theory.
2. Complete the sentence by filling the blanks: _________ , ___________ and __________ are
the building blocks of an atom.
3. With the help of an example, explain what elements are.
4. Why are atoms electrically neutral particles?
5. Why was a gold foil preferred over lithium foil by Rutherford in his experiment?
6. Differentiate between Dalton’s atomic model and modern atomic model?
7. Tick the correct answer: The electronic configuration of Calcium is-
a. K-2, L-8, M-10 b. K-8, L-8, M-4
c. K-2, L-8, M-8, N-2 d. K-2, L-8, M-2, N-8
8. Write the electronic configuration of Magnesium as per Bohr-Bury Scheme.
9. Complete the table given below:
10. Chlorine is an element having atomic number 17. It is a mixture of two isotopes having mass
number 35 and 37.
a. What is meant by “atomic number of element”? What do you understand by an
‘isotope‘?
b. Write the electronic configuration of chlorine atom.
c. Give one property of hydrogen chloride which agrees with it being a covalent
compound.
11. Elements X, Y and Z have atomic numbers 3, 10 and 17 respectively.
a. Which element is a metal?
b. Which element is a noble gas?
c. Which element is a non-metal?
12. Explain the postulates of Bohr’s atomic model.
13. Draw the electronic configuration of argon, fluorine and magnesium.
Element Symbol No of protons No of neutrons No of electrons
Silicon 1428Si
Boron 511B
Calcium 2040Ca
51
IX – Std. Atomic Structure – Homework
©Byjus
14. The transfer of one or more electrons from one atom to the other forms a (an) _______ bond.
a) Ionic b) Covalent
c) Hydrogen d) Metallic
15. Match the following
1 Cathode rays Positively charged mass at the centre of an atom
2 Atoms Positively Charged particles
3 Alpha rays Negatively charged particles
4 Nucleus Electrically neutral
16. State whether each of the following statements are True or False:
a. The outermost shell of an element is the valence shell.
b. The chemical properties of elements are decided by valence electrons.
c. Cations are good oxidizing agents.
d. Hydrogen has a proton and a neutron in its nucleus.
17. Represent the formation of a H2 molecule by electron dot diagram.
18. Consider the following elements labelled from A to E
i. Which of these elements contains 7 protons?
a) A b) E
c) D d) C
ii. Which of the given elements are metals? (Hint: Metals tend to lose their outermost electrons
to achieve a complete octet
19. Which isotope of iodine is used in the treatment of goitre?
a) 13153I b) 132
53I
c) 13155I d) 131
54I
20. Define isobars with the help of an example.
ATOMS MASS No. ATOMIC No.
A 40 20
B 19 9
C 7 3
D 16 8
E 14 7
53
IX – Std. Atoms and Molecules – Class notes I
©Byjus
Instructions: This booklet given to you is your Class Notes. Keep filling this sheet as the class proceeds.
At the end of this session, you will have your notes ready.
1. Introduction
What is Chemistry?
The answer is very simple. It is the study of atoms and molecules, how they behave and interact
with each other through different types of bonds. But that’s not how it all started.
a. The Four Elements
(Refer to subtopic - Laws of Chemical Combination I& II)
Throughout man’s evolution, human beings have always tried to understand what happened
around them and how they could use it for their convenience. One of the first things that
caught their curiosity was Fire. Fire along with air, water and land were considered the
four elements that made up everything. Democritus and Maharishi Kanada independently
believed that if we kept on breaking any substance into smaller and smaller particles, we
would eventually get an indivisible particle called “atomos” and “paramanu” respectively.
But these definitions were insufficient to understand what occurs around us.
Question1. Describe the experiment Lavoisier conducted and how it led to the discovery of Law of
conservation of mass? (Refer to subtopic - Laws of Chemical Combination III)
b. Elements and Compounds
(Refer to subtopic - Laws of Chemical Combination IV)
With John Dalton’s atomic theory, the definition of element changed. Elements were now
considered to be made up of atoms. These atoms were identical for an element and when
these atoms of one element combined with atoms of other elements, compounds were
formed. But Dalton’s theory had its limitations. One huge limitation was that his theory
considered atoms to be indivisible but soon discovery of electrons, followed by discovery
of protons and neutrons proved him wrong.
Question2. Discuss the pros and cons of Dalton’s atomic theory.
2. Atomic Mass
(Refer to video clip - Atomic Mass)
After various experiments and atomic models, it was established that the structure of atom
looked somewhat similar to our solar system. Most of the mass was concentrated in the centre
in a region of tightly packed positive and neutral particles called Nucleus.
What do you understand by atomic mass?
54
IX – Std. Atoms and Molecules – Class notes I
©Byjus
Figure 29 - Structure of Atom
Mendeleev considered atomic mass for arranging the known elements and found striking
similarities among the elements in a group. Mendeleev used Hydrogen as a standard for
measuring the relative weights of the known elements as Hydrogen was the lightest known
element. Even Oxygen was once considered as a standard for measuring weights because of its
ability to bond with other elements. But this was soon replaced by Carbon atom (Carbon-12
isotope).
Figure 30 - Mendeleev's Periodic Table
Question3. What do you mean by Carbon-12 isotope and why was it used as a standard for measuring
relative weights?
1/12th mass of a Carbon-12 isotope was considered 1 a.m.u where a.m.u stood for atomic mass
unit. Oxygen atom being 4/3 times heavier than a Carbon atom had a mass of 16 a.m.u in the
above system. Hydrogen being 1/12 times lighter than Carbon was the lightest element having
atomic mass of 1 a.m.u.
55
IX – Std. Atoms and Molecules – Class notes I
©Byjus
3. Mole Concept
(Refer to video clip- Mole Concept)
Question4. How is a molecule different from an atom? What will be the mass of 1 molecule of
Hydrogen?
In 1811, an Italian chemist Amedeo Avogadro came up with a theory after being inspired by
Gay-Lussac’s Law of combining volumes. According to Avogadro’s Law,"equal volumes of
gases at the same temperature and pressure contain the same number of molecules regardless
of their chemical nature and physical properties". He measured the mass of a 22.4 L sample of
Hydrogen and divided that by the mass of an individual Hydrogen molecule. He considered
22.4 L of Hydrogen as 1 mole and concluded that 1 mole of any elementcontained 6.022 x 1023
particles. As the mass of 1 molecule of Hydrogen was 2 a.m.u., 1 mole of Hydrogen molecules
weighed 2 grams where 2 grams was the gram molecular weight of Hydrogen.
Question5. State Gay-Lussac’s Law of combining volumes.
Mole is simply a unit for representing the number of atomic and subatomic particles in a sample,
just like score is a unit which represents a quantity of 20. 1 mole of any substance will have
6.022 x 1023 particles (a.k.a. Avogadro’s number). Some places have 6.023 x 1023 particles as
1 mole because it is easier to remember and the difference is insignificant.
Question6. A sample X has 3.011 x 1021 particles contained in it. Calculate the no. of moles of X in the
sample.
Question7. Calculate the number of atoms in 2.5 moles of Ammonia gas (NH3) taken in a closed beaker.
Question8. Calculate the number of electrons in a sample of Nitrogen gas (N2) which weighs 5.6 grams.
(Gram Molecular Mass of Nitrogen is 28gm)
Did you know?
While calculating the atomic mass of any element, we ignore the mass of electrons
present in it because an electron is 1/1836 times lighter than a proton and hence, its
contribution to the total mass of atom is negligible
56
IX – Std. Atoms and Molecules – Class notes II
BYJU’S Classes 7lakhs+ likes on India’s most liked educational company contact: 09900012400
Instructions: This booklet given to you is your Class Notes. Keep filling this sheet as the class
proceeds. At the end of this session, you will have your notes ready.
4. Relation between mole, mass and volume.
(Refer to video clip - Mole and Mass)
The Avogadro’s number is the number of molecules that are contained in a sample of 22.4 L of a
gas at NTP. Since, according to Avogadro’s Law, equal volume of gases should contain equal
number of particles at the same temperature and pressure, we can look at mole concept from two
directions. Firstly, a mole has 6.022 x 1023 particles. So any sample having 6.022 x 1023 molecules
will be considered 1 mole. The other approach is to calculate mole according to the volume present.
1 mole of any gas will have 6.022 x 1023 molecules and since these many particles occupy 22.4 L
at STP, hence, any gas occupying 22.4 L at NTP will be considered as 1 mole.
Figure 3 - Relationship between Mole, Mass and Volume
Some useful formulae:
Mole = Weight of Sample
Molecular Mass Mole =
Volume of Sample at NTP
22.4 L
Mole = No.of particles
6.023 x 1023
57
IX – Std. Atoms and Molecules – Class notes II
©Byjus
Question9. Express 6.4 gm of O2 gas in terms of its equivalent volume and number of molecules.
Question10. Metal X reacts with dilute acid, releasing 7.72 L of a gas at NTP which reignites the splint
with a pop sound. Calculate the number of molecules of the gas produced.
Question11. 0.3 gm of H2 gas reacts with N2 gas to produce Ammonia according to the following
reaction: N2 + 3H2→ 2NH3.Calculate the volume of Ammonia released at NTP.
5. Atomic Valency
(Refer to subtopic - Atomic Valency III)
Define the term ‘Valency’.
If we move from left to right in 2nd period of the modern periodic table, we will observe that
the number of valence electrons increases from 1 to 8. Lithium has 1 valence electron,
Beryllium has 2, Fluorine has 7 and Neon has 8. So the valency varies from 1 to 8.
Question12. Show the valency of Sodium, Aluminium and Oxygen with the help of shell diagrams.
All atoms participate in reactions to achieve the electronic configuration of the nearest noble
gases and attain stability. These noble gases have maximum number of electrons that their
outer-most shell can accommodate and are hence, largely unreactive.
Figure 4 - Atomic Structure of Noble Gases
Did you know?
Valency is a measure of the combining capacity. Even though a Chlorine atom has
7 electrons in its valence shell, it only shares 1 of them in a covalent bond. Many
elements also show multiple different valencies in different compounds such as
Iron, Tin, Lead and Phosphorus.
58
IX – Std. Atoms and Molecules – Class notes II
©Byjus
a. Cations
(Refer subtopic- Atomic Valency III)
Ionic bonding proceeds with actual
transfer of electrons. When an atom
loses an electron, at that instant, the
number of protons is greater than the
number of electrons by 1. Hence, it
attains a positive charge and is now
called a Cation.
Figure 5: Formation of Sodium ion
b. Anion
(Refer subtopic- Atomic Valency III)
When a neutral atom accepts an electron during an ionic bond formation, it becomes
negatively charged because it has more number of electrons as compared to protons. These
negatively charged ions are called Anions. These anions combine with the cations leading
to the formation of ionic bonds. These bonds are held together by strong electrostatic forces.
Question13. With the help of diagrams, show how ionic bond is formed between Sodium and Chlorine.
c. Atomicity
Define atomicity.
Question14. What will be the atomicity of the following elements/compounds?
(i) Ammonia (ii) Ozone (iii) Methane (iv) Chlorine
6. Writing Chemical Formula
(Refer video clip - Writing Chemical Formula)
Chemical formula of an element/compound represents the ratio in which the atoms exist in a
molecule. The chemical formula of any element/compound can be written in the following
steps.
The name of more electropositive element (usually a metal) is written first
The name of more electronegative is written in the last with the name ending as –ide.
For e.g. Chloride, bromide, etc.
The valency of the electropositive element/ion should satisfy the valency of the
electronegative element/ion.
There should be no common factor in the atomicity of electronegative and
electropositive elements in the molecule.
59
IX – Std. Atoms and Molecules – Class notes II
©Byjus
Question15. Write the chemical formula of a compound compromising of:
(i) Carbon and Oxygen (ii) Nitrogen and Hydrogen (iii) Magnesium and
Chlorine.
Alternate Method
(Refer subtopic - Writing Chemical Formulae II)
Write the more electropositive element first and then the electronegative element.
Write their respective valency below them.
Cross multiply their valencies to get the atomicity.
Cancel out any common factor in the obtained atomicities.
Question16. Write the chemical formula of the following compounds using the alternate method:
(i) Lithium and Oxygen (ii) Chlorine and Fluorine (iii) Carbon and Iodine
61
IX – Std. Atoms and Molecules – Homework
©Byjus
Instructions: This booklet given to you is your Homework Sheet. Solve these problems at home. You
shall be exam-ready if you can finish all the problems.
1. State whether True or False:
An atom is the smallest particle of an element that exhibits all the properties of that element.
2. In a reaction, 15.3 g of sodium carbonate reacted with 16 g of ethanoic acid. The products
were 12.2 g of carbon dioxide, 1 g water and 18.1 g of sodium ethanoate. Show that these
observations are in agreement with the law of conservation of mass.
Sodium carbonate + ethanoic acid sodium ethanoate + carbon dioxide + water
3. Write down the 5 postulates of Dalton’s atomic theory.
4. Give the Latin names and symbols for the following elements:
Sodium
Potassium
Mercury
5. Calculate the relative molecular mass of caustic soda.
6. Give the relationship between 1 mole of any particle with Avogadro’s number and volume.
7. Which postulate of Dalton’s theory satisfies the law of constant proposition?
8. Convert the following into moles.
a) 20 g of oxygen
b) 50 g of water
9. Give the chemical formula of the following compounds:
a) Magnesium sulphate
b) Aluminium oxide
c) Caustic soda
10. With the help of an example, explain polyatomic ions.
11. How many atoms are present in a:
a) Sulphite ion
b) Hydrogen carbonate ion
12. Write down the rules to be followed while naming an ionic chemical compound.
13. Write three differences between anions and cations.
14. What are the drawbacks of Dalton’s atomic theory?
15. Define atomicity. What is the atomicity of the following compounds?
a) Sulphur
b) Phosphorus
16. Which of the following is not a symbol of an element?
a) Ne b) So
c) Au d) N
62
IX – Std. Atoms and Molecules – Homework
©Byjus
17. Chemical formula of ammonium sulphate is:
a) (NH4)2SO2 b) (NH3)2SO2
c) (NH4)2SO4 d) (NH4)3SO5
18. Avogadro number is defined as the number of atoms in a 12 g sample of __________
element.
a) Carbon- 12 b) Carbon
c) Oxygen d) Hydrogen
19. Latin name of tungsten is-
a) Ferrum b) Kalium
c) Hydrargyrum d) Wolfram
20. The relative mass of a molecule is expressed as:
a) Atomic mass unit b) Atomic weight unit
c) Relative atomic mass unit d) None of these
64
IX – Std. Is the matter around us pure? – Class notes
©Byjus
Instructions: This booklet given to you is your Class Notes. Keep filling this sheet as the class proceeds.
At the end of this session, you will have your notes ready.
1. Introduction
Physically, matter can be classified into three physical states. The physical aspects cover these
states, their inter conversion and the changes it undergoes while transforming. But matter can
also be classified by its chemical composition as:
Pure substance
Impure substance
2. Pure substance (Purity)
(Refer to video clip - Purity)
What do you understand by the term 'Pure Substance'?
Question1.Is the pure milk that you get, really pure? Justify your answer.
Pure substance can be further classified into:
a. Elements
(Refer to video clip - Elements)
Define the term 'elements'.
b. Compounds
(Refer to video clip - Compounds)
Question2.Why is water considered as a compound?
Figure 31 - Types of Pure Substances
Very few of the chemicals and substances we encounter on daily basis are in their pure form.
Most of them are mixtures.
65
IX – Std. Is the matter around us pure? – Class notes
©Byjus
3. Impure Substance
(Refer to video clip - Mixtures)
A mixture is a combination of two or more pure substance in which each pure substance retains
its individual chemical properties. Mixture can be composed of solid, liquids or gases.
What are the two basic types of mixtures?
a. Homogenous mixture
A homogeneous mixture is simply any mixture that has uniform composition throughout
the mixture.
There is only one phase of matter observed in a homogenous mixture. Mixtures where the
observed phase is liquid are known as True solutions or generally as Solutions.
Question3.You have one glass of water and some sugar and sand. How will you create a homogeneous
mixture?
b. Solutions
(Refer to video clip - Solutions)
A homogeneous mixture of two or more substances, which may be solids, liquids, gases
or any other combination of these.
The particles should have dimension between 0 and 2 nanometer.
Solutions are transparent, i.e. light can pass through it. Mixtures are stable and do not
change after standing for long time.
Question4.Mention the solute and solvent of a water-salt solution.
c. Heterogeneous mixture
A heterogeneous mixture is one that is composed of components that aren’t uniform.
Instead, they have localized regions where they have different properties.
i. Colloids
(Refer to video - Colloids)
What are colloids?
Types of colloids
Question5. Can you name two colloidal solutions which have gas as dispersion medium and liquid and
solid as dispersed phases?
Dispersion Medium Dispersed Phase Type of Colloid Example
Solid Solid Solid sol Ruby glass
Solid Liquid Solid emulsion/gel Pearl, cheese
Solid Gas Solid foam Lava, pumice
66
IX – Std. Is the matter around us pure? – Class notes
©Byjus
Question6. What are sols and emulsion?
ii. Suspensions
(Refer to video clip - Suspensions)
A suspension is a heterogeneous mixture in which solids are dispersed in liquids. The
solute particles in suspension do not dissolve but remain suspended throughout the
medium.
Question7.Write the properties of suspension.
4. Concentrations
(Refer to video clip - Concentration of Solutions)
A complete description of a solution, it describes what the solute is and how much solute is
dissolved in a given amount of solvent or solution. The quantitative relationship between solute
and solvent is the concentration of the solution. This concentration may be expressed using
several different methods.
Question8.How do you express concentration of a solute in solvent in terms of percentage?
5. Physical and Chemical Changes
(Refer to video clip - Physical Vs Chemical changes)
Now we have studied both the chemical and physical states of matter. There are several
differences between the physical & chemical changes.
a. Physical Change
Changes wherein the molecule does not change its chemical makeup but its physical
appearance might be altered.
Did you know?
We all have experienced such a picture where we are
able to see the path of light. Such a phenomenon occurs
when light travels through a colloid. This
phenomenon, known as Tyndall effect, is caused by
light scattering by particles in a colloid or particles in
a very fine suspension.
67
IX – Std. Is the matter around us pure? – Class notes
©Byjus
Figure 2 - Heat Leading to Larger Inter-molecular Space.
b. Chemical Change
Question9. Would you term curd formation as a chemical change? Justify your answer.
Question10. Classify the following on the basis of whether they are a chemical or physical change.
(a) Whipping of egg whites (b) Milk souring (c) Dicing the potato
6. Separation Techniques
(Refer to video clip - Introduction to Separation)
Heterogeneous and Homogeneous mixtures are separated using different techniques based on
the type of mixture we are dealing with.
a. Sublimation
(Refer to video clip - Sublimation)
Sublimation is a process of conversion of a solid into vapour or a vapour back to solid state,
without passing through the liquid state.
Did you know?
One of earliest separating techniques was invented by
farmers who separated husk from paddy. They allowed
both of them to fall along the wind. Husk being lighter,
was carried by the wind to a longer distance.
Did you know?
One of earliest separating techniques was
invented by farmers who separated husk
from paddy. They allowed both of them to
fall along the wind. Husk being lighter, was
carried by the wind to a longer distance.
68
IX – Std. Is the matter around us pure? – Class notes
©Byjus
Figure 3 - Separation using Sublimation
Question11. What type of mixture can be separated by sublimation?
b. Distillation
(Refer to video clip - Distillation)
What is distillation? Which property of substances does this process use as a basis for
separation of components of a mixture?
Figure 4 - Separation by Distillation
69
IX – Std. Is the matter around us pure? – Class notes
©Byjus
c. Centrifugation
(Refer to video clip - Centrifugation)
Question12. Explain the method of centrifugation.
Any heterogeneous mixture containing an insoluble solid in a liquid can be separated by two methods
Sedimentation
Decantation
d. Sedimentation
The insoluble solid substance in the solution settles down at the bottom of beaker and a
clear liquid is obtained standing above the solute. This process is called sedimentation.
Figure 5 - Settling of Solute : Sedimentation
Question13. What do you understand by the process of decantation?
e. Chromatography
(Refer to video clip - Chromatography)
Define chromatography. Explain the underlying principle involved.
Figure 6 - Separation of Dyes
70
IX – Std. Is the matter around us pure? – Class notes
©Byjus
Misconception: Passing any water through a water-purifier makes it fit to drink.
Clarification: Water purifiers have special filters that keep back dust and impurities
present as particles in the solution. But these water purifiers are unable to keep out any
impurities that might be dissolved in the water. Speaking in simple terms, water
purifier only purifies the water physically, leaving scope of chemical poisoning.
72
IX – Std. Is matter around us pure? – Homework
©Byjus
Instructions: This booklet given to you is your Homework Sheet. Solve these problems at home. You
shall be exam-ready if you can finish all the problems.
1. What do you mean by a pure substance?
2. Are compounds pure substances? Justify your answer.
3. What do you mean by a heterogeneous mixture?
4. In a homogeneous solution, the dimension of solute particles varies between:
a. 1 – 103 nm b. 104 - 106 nm
c. 105 - 106 nm d. 108 – 109 nm
5. Does light pass through a colloid without any deflection?
6. How is a suspension different from a colloid?
7. Is milk a colloid, suspension or true solution? Justify.
8. How will you separate a mixture of iron fillings and sand?
9. What is sublimation? Give examples of sublimable substances.
10. Explain the principle of distillation which is used as a separation method.
11. Explain the working of centrifugation separation technique? Use the example of separation of the
components of blood.
12. What type of mixtures can be separated by sedimentation?
13. What do you mean by decantation?
14. A solution of water and sugar is an example of:
a. Colloid b. Suspension
c. True solution d. Pure substance
15. Mixtures of coloured compounds can be separated by:
a. Distillation b. Decantation
c. Centrifugation d. Chromatography
16. What is the use of chromatography? Explain the principle behind it.
17. Light passes through _________ without any deflection.
a. Solution b. Colloid
c. Suspension d. Emulsions
18. What is meant by concentration of solution?
19. How will you separate a solution of oil and water?
73
IX – Std. Is matter around us pure? – Homework
©Byjus
20. You have two substances with a large difference in their weight. Which of the following technique
is used for the separation of the mixture?
a. Distillation b. Chromatography
c. Sublimation d. Centrifugation
75
IX – Std. Matter in our surroundings – Class notes I
©Byjus
Instructions: This booklet given to you is your Class Notes. Keep filling this sheet as the class proceeds.
At the end of this session, you will have your notes ready. (Depends accordingly)
1. Introduction
(Refer to video clip - Physical nature of matter)
What is matter? There are many possible definitions for matter.
Matter is anything that has mass and takes up space.
Matter is everything around you.
The substance of which any physical object is composed.
Question1. What do you understand by mass?
a. Nature of Particles
(Refer to video clip- Characteristics of particles of matter)
Write down the four points regarding the nature of particles.
2. States of Matter
(Refer to video clip - States of Matter)
Matter exists in three states that are distinguished by the strength of the bonds holding the
molecules of matter together.
Figure 32 - The Three States of Matter
Can you recognize three states of matter given above?
3. Inter-convertibility of Matter
(Refer to video clip - Can matter change its state)
Kinetic theory of matter explains the difference between these three states of matter.
Solids can transform into liquids & liquids into gases. Many factors contribute to the inter-
conversion of states of matter.
76
IX – Std. Matter in our surroundings – Class notes I
©Byjus
Figure 33 - Inter-conversion of States of Matter
The kinetic theory of matter states that matter is composed of a large number of small particles
that are in constant motion. It also assumes that particles are small and widely spread. They
collide and exchange energy. The theory helps explain the flow or transfer of heat and the
relationship between temperature and volume of gases.
Question2. Write a brief note on the relation of kinetic energy of particles with the states of matter.
a. Solids
(Refer to subtopic - Three states, video clip - States of matter)
Particles in solid are closely packed. Inter-particle space is negligible. The
transformation of solid to liquid state by the absorption of heat at a particular
temperature and atmospheric pressure is called melting.
Figure 34 - Solid-Liquid Inter-conversion
Did you know?
It has been established that matter can exist in five states of matter. Apart
from solid, liquid and gases, matter can also exist in plasma state (hot
ionized gas) and in BEC (Bose-Einstein Condensate) state where matter is
really slow moving and extremely condensed.
77
IX – Std. Matter in our surroundings – Class notes I
©Byjus
What do you understand by the term 'latent heat of fusion'?
Sublimation is the process where a solid directly transforms to gaseous state, thus
skipping the liquid state. Very few substances are sublimable.
Question3. Why do phenolphthalein balls become smaller when kept out in the open?
b. Liquids
(Refer to subtopic - The Liquid State, video clip - States of matter)
Define the term 'latent heat of vaporization'.
i. Evaporation
(Refer to video clip- Evaporation)
Evaporation on the other hand is a surface phenomenon.
Evaporation doesn’t occur at a specific temperature but
its a continuous phenomenon that occurs all the time.
Higher the temperature, more particles will come to the
surface with sufficient energy leading to greater
evaporation.
Figure 35 - Evaporation
ii. Condensation
Condensation too is a surface phenomenon and is the reverse of evaporation.
When gaseous particles lose energy and come close to the surface of liquid,
they are pulled back into the liquid surface and are said to be condensed.
a
Question4. Why does evaporation cause cooling effect? (Refer video: Evaporation)
c. Gases (Refer to subtopic- The Gaseous state, video clip- States of matter)
When gases change state, i.e. transform from gaseous to liquid state at a particular
temperature, it is called liquefaction. At this temperature, the pressure above the liquid
surface becomes equal to the atmospheric pressure.
Did You Know?
It is sometimes said that glass in very old churches is thicker at the bottom
than at the top because glass is a liquid, and so over several centuries it has
flowed towards the bottom. But, glass is neither a crystalline solid nor a
super-cooled liquid. It is an amorphous solid.
78
IX – Std. Matter in our surroundings – Class notes I
©Byjus
Figure 36 - Liquid-vapor Inter-conversion
Question5. Why do you observe small water droplets forming on cold surfaces which are exposed to
air?
4. Law of Conservation of Mass
Question6. Explain the law of conservation of mass.
Misconception: The mass of reactants before a reaction is always equal to the mass of
the products after the reaction.
Clarification: Law of conservation of mass holds true only for closed systems. In case,
any of the reactant or product is allowed to leave the system law of conservation of
mass stands violated.
80
IX – Std. Matter in our surrounding – Homework
©Byjus
Instructions: This booklet given to you is your Homework Sheet. Solve these problems at home. You
shall be exam-ready if you can finish all the problems.
1. What are the three states of matter? Can they co-exist?
2. Compare the properties of the different states of matter.
3. What do you understand by the term boiling point?
4. Is evaporation a surface phenomenon? Justify.
5. How is evaporation different from boiling?
6. Define condensation.
7. Explain the working principle behind the functional advantage of a pressure cooker.
8. Condensation occurs at a fixed temperature whereas melting occurs over a range of temperature.
(True/False). Justify your answer.
9. The particles of a solid possess:
a. Translatory motion b. Vibrational motion
c. Rotational motion d. No motion
10. _______ state(s) has definite mass but no definite volume:
a. Solid b. Liquid
c. Gas d. Liquid and gas
11. What do you mean by sublimation?
12. Why do we experience a burning sensation when we come in contact with steam?
13. Define latent heat of fusion and vaporization.
14. Sweating results in cooling of the body. Give reason.
15. State the law of conservation of mass.
16. Shrinking of naphthalene balls on prolonged exposure to air is due to:
a. Evaporation b. Condensation
c. Sublimation d. None of these
17. Distinguish between gas and vapour.
18. Explain the conversion of solid to liquid on the basis of kinetic theory of matter.
19. The phenomenon responsible for rainfall is (are):
a. Evaporation b. Condensation
81
IX – Std. Matter in our surrounding – Homework
©Byjus
c. Both of these d. None of these
20. According to kinetic theory of matter, particles of _______ have the least amount of energy.
a. Solid b. Liquid
b. Gas d. Gas and solid
83
IX – Std. Cell: The Fundamental Unit of Life – Class notes I
©Byjus
Instructions: This booklet given to you is your Class Notes. Keep filling this sheet as the class
proceeds. At the end of this session, you will have your notes ready.
1. Introduction to cells
Cells are the smallest unit of life that can replicate independently, and are often called the
‘building blocks of life’. The study of cells is called cell biology. Cells consist of a protoplasm
enclosed within a membrane, which contains many biomolecules such as proteins and nucleic
acids.
Question1. Cell is the structural and functional unit of life. Why do you think is it called so?
Cells can be of different shapes and sizes. To understand this, consider below given diagram
of cells found in humans.
Figure 37: A. Nerve cell B. Ovum C. Sperm D. Cheek cells
Question2. Why do cells have different shapes and sizes?
(Refer video: Introduction to Fundamental Unit of Life _ Basic Unit of Life)
a. Discovery of cell
Question3. Match the following:
Robert Hooke All animals are made up of cells
Anton Van Leeuwenhoek Discovered cell
Matthias Schleiden Invented microscope
Theodor Schwann All plants are made up of cells
(Refer video: Introduction to Fundamental Unit of Life _ Discovery of Cell)
2. Stuctural Organisation of the Cell
If we study a cell under microscope, we would come across three features in almost every cell
: plasma membrane, nucleus and cytoplasm . Let us discuss each one of them in detail.
a. Plasma Membrane
84
IX – Std. Cell: The Fundamental Unit of Life – Class notes I
©Byjus
The outer most covering of cell is called plasma membrane. The most accepted theory of
plasma membrane structure is _____________________. According to this theory, the
plasma membrane that surrounds cell has two layers (a bilayer) of phospholipids (fats with
phosphorous attached), which is fluid at body temperature. Proteins and substances such as
cholesterol become embedded in the bilayer, giving the membrane mosaic mosaic like look.
Plasma membrane separates the contents of the cell from its external environment. Plasma
membrane is a _______________ membrane i.e., it allows entry and exit of only selected
material in and out of the cell.
Question4. Explain how the fragrance of an incense stick burning in a corner of the room can be felt
throughout the room. Define the process involved.
(i) Passive Transport
This is the process of transport of materials, in and out of the cell, along a concentration
gradient without spending _________. Substances like CO2 and O2 move in and out
of the cell passively by the process of __________. The amount of CO2 present in the
extracellular fluid is less as compared to the amount of CO2 present inside the cell (CO2
is released during cellular processes). The moment this concentration gradient is
created, CO2 moves out of the cell. Similarly, when the amount of O2 present in the
extracellular fluid is more as compared to the amount of O2 present inside the cell, (O2
is utilised during cellular processes) O2 moves into the cell.
Movement of water also obeys the law of diffusion but in a special way. Movement of
water molecule from a region (solution) of its higher concentration to a region
(solution) of its lower concentration through a semi permeable membrane is known as
_________. Thus, we can say that __________ is a special kind of diffusion in which
solution moves across the gradient.
Question5. Differentiate between diffusion and osmosis.
From the above discussion, it is clear that two solutions are required for osmosis. In case
of cells, first solution is the cell sap and second solution is the extracellular fluid. When the
85
IX – Std. Cell: The Fundamental Unit of Life – Class notes I
©Byjus
concentration of extracellular fluid is more than the concentration of cell sap it is called
___________solution. When the concentration of extracellular fluid is less than the
concentration of cell sap it is called _____________solution. When the concentration of
extracellular fluid is equal to the concentration of cell sap it is called ___________ solution.
Question6. With the help of an arrow show the net movement of water when a cell is kept in the
following conditions/solutions.
Question7. Discuss the effects when a plant cell is kept in hypotonic and hypertonic solution.
Question8. What will happen if a fresh water fish is kept in sea water and why?
Did you know ?
The direction of osmosis can be reversed by applying external pressure to it.
This process is called reverse osmosis and is working principle of RO water purifiers.
(ii) Active Transport
Transport of substances in and out of cell at the expense of energy in the form of
_______ molecule is called active transport. This generally occurs when transport of
molecules across cell membrane is done against concentration gradient.
(Refer video: Fluid Mosaic Model)
b. Cell wall
In plants, other then plasma membrane, one more external layer is found called the cell
wall. Plant cell wall is made of _________. It is somewhat rigid but permeable to most of
the substances. Cell wall is also found in cells of bacteria and fungi. It provides rigidity to
the cell. It prevents the plant cells from desiccation. It gives shape to the plant cell. It
protects the plant cell from external environment (hypotonic solution).
(Refer video: Structural Organisation of the Cell_Structre of Cell)
86
IX – Std. Cell: The Fundamental Unit of Life – Class notes I
©Byjus
c. Cytoplasm
Cytoplasm is a thick matrix that fills each cell and is enclosed by the cell membrane. It is
mainly composed of water, salts, and proteins. In eukaryotic cells, the cytoplasm includes
all of the material inside the cell and outside of the nucleus.
d. Nucleus
Remember the central circle in the human cheek cell that we had seen in the beginning of
this chapter? It is the nucleus of the cell. Nucleus is the main ___________ unit of the cell.
The membrane around nuleus is called nuclear membrane which is double layered. Nuclear
membrane has pores called ____________ that help in transportation of substances in and
out of nucleus. The matrix inside nucleus is known as ____________. The nucleus contains
chromosomes, which are visible as rod-shaped structures only when the cell is about to
divide. Chromosomes contain information for inheritance of features from parents to next
generation in the form of DNA (Deoxyribonucleic acid) molecules. Chromosomes are
composed of DNA and protein. Functional segments of DNA are called _______. There
are 23 pairs of chromosomes present in the human cells.
Figure 2: A. Prokaryotic cell B. Eukaryotic cell
Did you know ? Each human cell contains around 6 feet of DNA which is tightly
packed, but very organized with proteins
(Refer video: Cell Organelles_Cytoplasm)
Cells can be divided into two groups on the basis of the type of nucleus found in them –
___________ or __________. In organisms like bacteria, nuclear membrane is absent.
Such an undefined nuclear area is called a ___________. In contrast to this, cells in which
a well defined nucleus with a nuclear membrane is present are called eukaryotic cells.
87
IX – Std. Cell: The Fundamental Unit of Life – Class notes I
©Byjus
Question9. Differentiate between prokaryotic and eukaryotic cells with an example of each.
(Refer video: Structural Organisation of the Cell_Classification of cell)
3. Cell Organelles
Eukaryotic cells contain many membrane-bound organelles. An organelle is an organized and
specialized structure within a living cell. The organelles include the nucleus, endoplasmic
reticulum, golgi apparatus, vacuoles, lysosomes, mitochondria, etc.
a. Endoplasmic Reticulum (ER)
The endoplasmic reticulum is a network of membranous tubules within the cytoplasm of
an eukaryotic cell, continuous with the nuclear membrane. There are two types of ER –
rough endoplasmic reticulum (RER) and smooth endoplasmic reticulum (SER). RER has
__________ attached on its surface and is involved in protein synthesis. As the name
suggests the SER has no ribosomes attached to it and is involved in _______ synthesis. In
liver cells of vertebrates, SER plays a vital role in detoxifying many poisons and drugs.
Figure 3: Endoplasmic reticulum
Question10. What do you mean by membrane biogenegis?
(Refer video: Cell Organelles_Endoplasmic Reticulum)
b. Golgi Apparatus
Golgi complex was discovered by Camillo Golgi for which he received Nobel prize in the
year 1906. It is composed of many sac-like structures which are stacked one above another.
Its functions include the storage, modification and ___________ of products made by ER
in vesicles.
88
IX – Std. Cell: The Fundamental Unit of Life – Class notes I
©Byjus
Figure 4: Golgi complex
c. Lysosomes
Lysosomes are single layered. It is _____________ system of the cell. Lysosomes help to
keep the cell clean by digesting any foreign material as well as worn-out cell organelles.
They contain powerful digestive enzymes capable of breaking down all organic material.
Question11. Explain how lysosomes help in defence of the cell.
Question12. Why lysosomes are called suicide bags of cell?
(Refer video: Cell Organelles_Golgi Apparatus and Lysosomes)
d. Mitochondria
Mitochondria is also known as ‘_____________’ of a cell as it is the site of production of
energy currency of the cell i.e. ATP. Mitochondria have two membrane coverings instead
of just one. The outer membrane is very porous while the inner membrane is extensively
folded. Each fold is called a ________. These folds provide large surface area for
generating ATP. A very unique feature of this organelle is that it has its own DNA.
Figure 5: Mitochondria
(Refer video: Cell Organelles_Mitochondria)
e. Plastids
89
IX – Std. Cell: The Fundamental Unit of Life – Class notes I
©Byjus
Plastids are major organelles found in the cells of plants and algae. Plastids often contain
pigments (chlorophyll) used in photosynthesis, and the types of pigments present can
change or determine the cell's color.
Plastids are also double layered and like
mitochondria they contain their own DNA and
ribosomes.
Question13. Match the following
i. Leucoplast a. gives colour to plant parts
ii. Chromoplast b. helps in photosynthesis
iii. Chloroplast c. colourless and stores starch, oil, protein.
f. Vacuoles:
Vacuoles are storage sacs. Vacuoles are small in size in animal cells while plant cells have
very ________ vacuoles. In plant cells vacuoles are full of cell sap and provide __________
and rigidity to the cell.
(Refer video: Cell Organelles_Plant Cell)
Question14. Based on the entire discussion and the figure given below, differentiate between plant
and animal cell.
(Refer video: Cell Organelles_Animal vs Plant Cell)
91
IX – Std. Cell: The Fundamental Unit of Life – Homework
©Byjus
Instructions: This booklet given to you is your Homework Sheet. Solve these problems at home. You
shall be exam-ready if you can finish all the problems.
1. Which of the following has single membrane?
A. Nucleus
B. Mitochondria
C. Chloroplast
D. Lysosome
2. The outer most layer of human cheek cell is:
A. Cytoplasm
B. Plasma membrane
C. Cell wall
D. Nuclear membrane
3. The organelle which is absent in kidney cells is:
A. Centrioles
B. Plasma membrane
C. Mitochondria
D. Chloroplast
4. Which of the following is wrongly matched?
A. Chloroplast – chlorophyll
B. Elaioplast – starch
C. Amyloplasts - carbohydrates
D. None of these
5. State whether the following statements are true or false. If false write the correct statement.
i. Amoeba is a multicellular organism.
ii. All kinds of plastids have coloured pigments.
iii. Plasma membrane is present in all cells.
iv. Movement of molecules from area of low concentration to an area of high concentration
is called diffusion.
v. Cell wall of the plant cell is a living structure.
6. Name and define the phenomenon by which raisins placed in water swells
7. A drop of ink is put gently inside a glass of water. What will be observed after sometime?
8. What change in size will be observed if a shelled raw egg and a deshelled boiled egg is placed
in water?
9. Define cell organelle with one example.
10. How does water travel across plasma membrane? Explain its movement when the cell is placed
in hypertonic, hypotonic and isotonic solution.
11. How are carbon dioxide and oxygen transported across plasma membrane?
12. Give two functions of cell wall.
13. Explain the structure of nucleus. Also mention its functions.
14. Differentiate between prokaryotes and eukaryotes with example.
15. Differentiate between rough endoplasmic reticulum and smooth endoplasmic reticulum.
16. ‘Lysosomes are suicide bags of the cell’. Justify.
17. Name the different types of plastids found in cell and mention the function of each.
18. Differentiate between plant and animal cell on the basis of presence or absence of the following:
i. Plastids
ii. Vacuoles
iii. Centrosome and centrioles
iv. Cell wall
19. Name two organelles that contain their own genetic matter.
20. Perform the following activity. Cut a potato into a cube. Carve out a small cup in the cube. Put
normal water into the potato cup. Place the potato cup in salt water. After few minutes measure
the level of water present in the cup. Give reason for your observation.
93
IX – Std. Tissues – Class notes
©Byjus
Instructions: This booklet given to you is your Class Notes. Keep filling this sheet as the class
proceeds. At the end of this session, you will have your notes ready.
Question 1. We know that cells are the structural and functional unit of life. What is the next level of
the hierarchy of classification? Why do we need it?
1. Introduction
Tissues are a group of cells that are specialized to perform a specific function. They are like
families of cells functioning together. Several tissues together combine to form an organ.
Tissues are different for plants and animals because their cellular structures are fundamentally
different. This results in different growth pattern in both plants and animals. Moreover, plants
and animals differ functionally as well. For instance, plants are stationary and perform
photosynthesis for manufacture of food; whereas, animals are mobile and depend on plants or
other animals for food.
(Refer video: Introduction)
2. Plant Tissues
Plant tissues can broadly be divided into two types – Meristematic tissues and Permanent
tissues.
a. Meristematic tissues
Plants grow at very specific regions. This growth is brought about by the meristematic
tissues. The cells of these tissues keep on dividing and give rise to new cells. These cells are
very active with dense cytoplasm, thin cell wall, prominent nuclei and no vacuoles.
Meristematic tissues are present at the growing parts of plant. These are dividing tissues
classified into apical meristem, lateral meristem and intercalary meristem.
(Refer video: Plant Tissues_Types of Plant Tissues)
(i) Apical Meristem
These tissues are present at the tip of shoot and root of the plant. They therefore, bring
about the increase in plant height and also the length of the root inside the soil.
(Refer video: Plant Tissues_Apical Meristem)
(ii) Lateral Meristem
These tissues are present in the lateral walls of the stems and bring in the increase in
girth of the plant.
(Refer video: Plant Tissues_Lateral Meristem)
(iii) Intercalary Meristem
These tissues are present at the base of leaves or internodes.
(Refer video: Plant Tissues_Intercalary Meristem)
94
IX – Std. Tissues – Class notes
©Byjus
Question 2. In the given diagram, locate the position of the different types of meristematic tissues in
plants.
Question 3. Why do meristematic tissues lack vacuoles?
b. Permanent Tissues
These are the tissues which are made up of cells that lose the ability to divide and take up a
specific function in the plant. This process in which the cells of meristematic tissue take up
specific functions or roles is known as differentiation. These tissues can be broadly divided into
two types – simple permanent tissues and complex permanent tissues. Simple permanent tissue
is further divided into three types – parenchyma, collenchyma and sclerenchyma. Similarly,
complex permanent tissue is further divided into two types – Xylem and Phloem.
(Refer video: Plant Tissues_Permanent Tissues)
(i) Simple permanent tissues
As already discussed, these tissues are of three different types. Parenchyma tissues are
made up of loosely packed cells with thin cell walls and large intercellular spaces. They
are live cells and help in support and storage. If the parenchyma cells contain
chlorophyll, they are called chlorenchyma and if they consists of large air spaces, they
are called aerenchyma.
(Refer video: Plant Tissues_Parenchyma)
Collenchyma tissues are made up of live cells which have irregularly thickened corners
with thus decreased intercellular spaces. They help in bending of various parts of the
plant without breaking.
Sclerenchyma tissues make up the hard and stiff parts of the plant. They are made up
of dead, long and narrow cells. They almost have no intercellular space as the walls are
thickened due to the presence of lignin.
(Refer video: Plant Tissues_Collenchyma)
95
IX – Std. Tissues – Class notes
©Byjus
Question 4. Identify the types of tissues and give one structural feature of each.
(ii) Complex Permanent Tissues
Complex tissues are made up of many types of specialized cells coordinating to perform a single
function. As we have already learnt, these are of two types – xylem and phloem. These form
the vascular system of the plant. Vascular or conductive tissues transport food, nutrients and
water across the plant. Water and minerals are conducted by xylem tissue while food is
conducted by phloem tissue.
Xylem is made up of the following components – vessels, tracheids, xylem parenchyma and
xylem fibres. Of all the components, the vessels and tracheids help in conduction of water and
minerals from the soil. Xylem parenchyma help in food storage and the xylem fibres provide
mechanical support.
Question 5. Identify the xylem components in the following figure.
(Refer video: Plant Tissues_Complex Tissue - Xylem)
Phloem is made up of the following components – sieve tubes, companion cells, phloem parenchyma
and phloem fibres. Unlike xylem, phloem conducts in both directions. Among all the components,
phloem fibres are the only dead cells.
96
IX – Std. Tissues – Class notes
©Byjus
Question6. Name the tissue and label its parts in the following diagram.
(Refer video: Plant Tissues_Complex Tissue - Phloem)
Epidermis forms the outer most layer of the plant cells. The epidermis in dry habitats is often
covered with a waxy layer called cuticle that prevents evaporation of water. This layer is
continuous without intercellular spaces and acts to protect the plant against physical damage
and pathogens. The epidermal layer on leaves and stems is interspersed with openings called
stomata, regulated by guard cells. This allows exchange of gases and transpiration. Epidermal
cells of roots have hair like projections that help to absorb water. As the plant grows, the
epidermis is replaced by the secondary meristem which is closely packed without intercellular
spaces. This begins to lignify creating a thick impervious layer. A chemical called suberin is
deposited that makes this impervious to water and gases.
(Refer video: Plant Tissues_Epidermal Cells)
3. Animal Tissues
Animal tissues can broadly be divided into four types – Epithelial, Muscular, Connective and
Nervous tissues.
a. Epithelial Tissue
This group of tissues form the outer covering and protective layer of animals. They form the
outer lining of all the organs and cavities in the body. Based on structure and functions, we can
divide epithelial tissues into four different types – Squamous epithelium, Cuboidal epithelium,
Columnar epithelium and Stratified squamous epithelium.
(Refer video: Animal Tissues_Types of tissues)
(i) Squamous Epithelium
They form an extremely thin and flat layer of tissues. They provide a very thin layer
important for gaseous exchange, thus providing permeability. They are present in
the lining of oesophagus and mouth.
97
IX – Std. Tissues – Class notes
©Byjus
(ii) Cubiodal Epithelium
As the name suggests, they are cubiod in shape and form the lining of salivary glands
and kidney tubules. They provide mechanical support. They also form glandular
epithelium when they form glands.
(iii) Columnar Epithelium
These tissues line the organs which help in absorption and secretion , such as lining
of intestines. They are made up of elongated cells. When cilia is present on these
cells they form ciliated columnar epithelium like those present in the respiratory
tract.
Did you know?
Ciliated epithelium assists in removing dust particles
and foreign bodies which enter the air passages.
(iv) Stratified Squamous Epithelium
This kind of tissue is formed when multiple layers of squamous epithelium are
arranged in a pattern. Our skin is made up of this kind of tissue.
Question7. Identify A, B, C and D in the following figure.
A B
C D
(Refer video: Animal Tissues_Location of tissues)
b. Muscular Tissue
These tissues make up our muscules which are responsible for almost all the movements that
take place in the body. The muscles contain contractile proteins which bring about all the
contractions and relaxations in the muscles.
(Refer video: Animal Tissues_Muscular Tissue)
98
IX – Std. Tissues – Class notes
©Byjus
Muscular tissues can be of three types – Striated muscle, Smooth muscle and Cardiac muscle. All the
voluntary movements carried out by our body is carried out by the striated or skeletal muscles. They
are called skeletal because these tissues are mostly attached to the bones. Further they are long,
cylindrical, unbranched with striations and are multinucleated.
Almost all the involuntary movements in the body are carried out by the smooth or unstriated muscles.
They are long, smooth, spindle shaped and uninucleate. We can find them in places like alimentary
canal and blood vessels.
Did you know?
Hardest muscle in the body is the chin
Question8. Why do you think smooth muscles are also called unstriated muscles?
Question9. Which is the strongest muscle in the body? How can you say it is the strongest?
(Refer video: Animal Tissues_Skeletal and Smooth Muscles)
Cardiac muscles make up our entire heart. These muscles are involuntary in nature and show rhythmic
contractions and relaxations. Structurally they may look quite similar to striated muscles but they are
branched, uninucleate and have intercalated discs.
(Refer video: Animal Tissues_Cardiac Muscles)
Question10. Identify A, B and C in the following figure.
A
B
C
99
IX – Std. Tissues – Class notes
©Byjus
c. Connective Tissue
As the name suggests, these tissues help in connecting different parts of the body. For example,
blood is a connective tissue which transports oxygen, carbon dioxide, food, hormones and waste
materials from one part of the body to other. Blood is composed of a yellow coloured fluid
matrix called plasma and other cellular components like RBCs, WBCs and platelets are
suspended in it.
RBCs in blood impart it with the characteristic red colour. This red colour is due to the presence
of a iron containing pigment called haemoglobin.
(Refer video: Animal Tissues_Connective Tissues)
The various components of blood have very specific functions. The plasma helps in the
thermoregulation i.e. maintenance of constant temperature in the body. The RBCs play the vital
role of transporting oxygen to all parts of the body. WBCs form a major part of immune system
of the body and platelets help in clotting of blood in the case of an injury.
(Refer video: Animal Tissues_Types of Blood cells)
Question11. How do you think plasma regulates the body temperature?
Did you know?
A new born baby has just one cup of
blood in his/her body.
Bones form another set of connective tissue. They give the structural support to the body.They are non
flexible and are embedded in a hard matrix made up of calcium and phosphorus compounds. One bone
is connected to another bone with the help of ligaments which form strong elastic connective tissues
with very little matrix. Tendons are another type of connective tissues which connect muscles to bones.
They are very strong fibrous tissues with limited flexibility.
One more example of connective tissues is cartilage. These tissues are present in nose, ear, trachea and
larynx. They have widely spaced cells and have a matrix made up of proteins and sugars.
(Refer video: Animal Tissues_Bones, Ligaments and Tendons)
Areolar tissues are present in bone marrow, around blood vessels and between skin and muscles. They
help in repair of damaged tissues. The fats in the body are stored in adipose tissues in the form of fat
globules.Question12. Write one function each of aerolar tissue and adipose tissue.
(Refer video: Animal Tissues_Areolar and Adipose Tissues)
e.d. Nervous Tissue
This tissue is specialized to carry electrical signals throughout the body required to transmit information
and instructions. The nervous system is made up of brain, the spinal cord and several other nerves. The
brain is made up of nervous tissue and is essential for all sensations, consciousness, memory and
100
IX – Std. Tissues – Class notes
©Byjus
emotion. The dendrites of a nerve cell pick up electrical signals and then transmit them to other cells
via the axon endings.
Question13. Label the parts in the following figure.
Question14. What are glial cells? What is their function?
(Refer video: Animal Tissues_Nervous Tissue)
103
IX – Std. Tissues – Home work
©Byjus
Instructions: This booklet given to you is your Homework Sheet. Solve these problems at home. You
shall be exam-ready if you can finish all the problems.
1. What is the shape of the epithelial tissue
A. Flat
B. Cuboidal
C. Columnar
D. All of the above
2. Sclerenchyma tissue is thickened due to presence of:
A. Suberin
B. Lignin
C. Chitin
D. Cutin
3. The covering tissue of external and internal surfaces of animals is:
A. Epithelial
B. Nervous
C. Connective
D. Muscle
4. Short branched process coming out of a soma of neuron are:
A. Dendrites
B. Axons
C. Neutrophils
D. Lymphocytes
5. Cardiac muscles are:
A. Branched
B. Striated
C. Involuntary
D. All of the above
6. Name the following.
i. The tissue that helps to transport food and oxygen in humans.
ii. The tissue that helps to store fat.
iii. The tissue that helps in movement.
iv. The tissue that helps in transport of water in plants.
7. State whether true or false.
i. The cornea of the eye is an example of stratified epithelium.
ii. Unstriated muscles are voluntary muscles.
iii. Sieve cells are the parent of xylem tissue.
iv. Epidermis tissue is a type of permanent tissue.
8. Match the following:
i. Blood and lymph a. epithelial tissue
ii. Bone and cartilage b. areolar connective tissue
iii. Tendon and ligament c. skeletal connective tissue
iv. Ciliated and Cuboidal d. fluid connective tissue
9. Why is meristematic tissue important for the plant?
10. Which tissue produces the red blood cells in humans?
11. Define:
i. Meristematic tissue
ii. Permanent tissue
iii. Connective tissue
104
IX – Std. Tissues – Home work
©Byjus
12. Name and explain different types of simple permanent tissues found in plants.
13. Give three features of cardiac tissue.
14. Make a flow chart to show different kinds of tissues found in animals.
15. Make a flow chart to show different kinds of tissues found in plants.
16. What will happen if:
i. Ligament is over stretched.
ii. Apical meristem is removed or damaged.
17. What are complex tissues? Name the complex tissues and their components found in plants.
18. Differentiate between:
i. Simple and complex tissue.
ii. Xylem and phloem
19. What are connective tissues? Explain different type of connective tissues with the help of diagram.
20. Make a list of all the tissues you can think of in human body and try to classify each of them. You
can also take the help of internet