motions & emotions gliss• easy manual release • adjustable installation position both...
TRANSCRIPT
MOTORIDUTTORI ELETTROMECCANICIIRREVERSIBILI• automazioni complete di centralina
• senza manutenzione
• maniglia sblocco emergenza
incorporata
• facile installazione
• predisposti per innesto radio e
dispositivi di sicurezza
I modelli Gliss 400 e Gliss 500E sono
disponibili nelle versioni 230 V A.C.
e 24 V D.C.
USO INDUSTRIALE:
SERVIZIO INTENSIVO/CONTINUO
• Gliss 1500
• Gliss 2000
ACCESSORI
Cremagliera, fotocellule di sicurezza,
costa meccanica, ricevitore radio, tra-
smettitore, lampeggiatore di movimento,
selettore a chiave, pulsantiera, antenna,
colonnina per fotocellula.
ELECTROMECHANICAL IRREVERSIBLEGEARMOTORS• automation systems equipped with
control unit
• no maintenance required
• built-in safety release handle
• easy installation
• may be equipped with radio-receiver
unit and safety devices
The models Gliss 400 e Gliss 500 E are
available in the 230 V A.C. type and in
the 24 V D.C. type.
INDUSTRIAL USE:
INTENSIVE AND CONTINUOUS SERVICE
• GLISS 1500
• GLISS 2000
ACCESSORIESRack, photocells, mechanical safety,
radio-receiver unit, transmitter,
flashing lamp, key selector
push-button, antenna, column for
photocell.
Automatismoper cancelli scorrevoli
Automation systemfor sliding gates
GLISSM o t i o n s & E m o t i o n s
GLISS 400
GLISS 500E
Limiti di impiegoOperating limitsGLISS 400/500E/1000Iresidenziale - residentialGLISS 1300intensivo - intensiveGLISS 1500/2000continuo - continuous
Automatismoper cancelli scorrevoli
Automation systemfor sliding gates
GLISSM o t i o n s & E m o t i o n s
GLISS 1300GLISS 1500GLISS 2000
GLISS 1000I
Dati Tecnici Technical Data GLISS 400 GLISS 500E GLISS 1000I GLISS 1300 GLISS 1500 GLISS 2000
Alimentazione motore Motor supply V A.C. 230 V A.C. 230 V A.C. 230 V A.C. 230 V A.C. 400 V A.C. 400
Potenza assorbita Absorbed power W 170 W 280 W 500 W 500 W 500 W 750
Corrente assorbita Absorbed current A 0,85 A 1,6 A 2,5 A 2,5 A 1,4 A 2,5
Spinta Torque Nm 25 Nm 36 Nm 55 Nm 55 Nm 55 Nm 80
Velocità apertura Opening speed m/min 11 m/min 8,48 m/min 10,5 m/min 10,5 m/min 10,5 m/min 10,5
Ciclo lavoro Operating cycle 30% 40% 35% 40% 40% 60%
Grado di protezione Degree of protection IP 54 IP 54 IP 54 IP 54 IP 54 IP 54
Temperatura ambiente Operative temperature -20°/+70° -20°/+70° -20°/+70° -20°/+70° -20°/+70° -20°/+70°
Portata Capacity kg 400 kg 600 kg 1000 kg 1300 kg 1500 kg 2000
Lubrificazione Lubrification Grasso/Grease Olio/Oil Grasso/Grease Olio/Oil Olio/Oil Olio/Oil
Peso Weight kg 10,5 kg 13 kg 22 kg 26 kg 26 kg 28
Max 10 cm dalla zona di convogliamentoMax 10 cm from the conveyance area
40-60 cm dal suolo (secondonormativa vigente)40-60 cm from the ground(according to standard in force)
GLISS 2000 MCAutomatismi per cancelli scorrevolimonofase.• Motoriduttori elettromeccanici
irreversibili 230 V AC completi di cen-tralina
• Autoventilati e dotati di encoder• Facile sblocco manuale• Facilità di regolazione posizione moto-
re sia verticalmente che orizzontalmente• Possibilità di installare fine corsa
magnetici Mod. GF.CM
GLISS 2000 TCAutomatismi per cancelli scorrevolitrifase.• Motoriduttore elettromeccanico
irreversibile 400 V AC senza centralina• Motore ventilato autofrenante• Rilevamento elettronico degli ostacoli• Facilità di regolazione posizione moto-
re sia verticalmente che orizzontalmente.
GLISS 2000 MCElectromechanical irreversible sliding gatemotors mono-phase.• Single-phase operator 230 V AC with
built-in control unit• Encoder equipped and auto-ventilated• Easy manual release• Adjustable installation position both
horizontally and vertically• Magnetic limit switch Mod. GF.CM
available on request
GLISS 2000 TCElectromechanical irreversible sliding gatemotors three-phase.• Auto-ventilated gate motor 400 V AC
without control unit• Electronic obstacle detection• Auto-breaking• Easy manual release• Adjustable installation position both
horizontally and vertically.
Automatismo per cancelliscorrevoli fino a 2000 kg.
Automation system for slidinggates up to 2000 kg.
GLISS 2000 MC/TCM o t i o n s & E m o t i o n s
Dati Tecnici Technical Data GLISS 2000 MC GLISS 2000 TC
Alimentazione motore Motor supply V A.C. 230 V A.C. 400
Potenza assorbita Absorbed power W 480 W 500
Corrente assorbita Absorbed current A 3,0 A 1,6
Spinta Torque Nm 55 Nm 60
Velocità apertura Opening speed m/min 10,5 m/min 10,5
Ciclo di lavoro Operating cycle 40% 60%
Grado di protezione Degree of protection IP 54 IP 54
Temperatura funzionamento Operative temperature -20°/+70° -20°/+70°
Peso max cancello Max gate weight kg 2000 kg 2000
Lubrificazione Lubrification Grasso/Grease Grasso/Grease
Modulo cremagliera Rack modulus M4 M4
Peso Weight kg 17 kg 18