mounting of single font - micro matic of...mounting of single font flexi-draft this document is the...
TRANSCRIPT
Mounting of Single Font Flexi-Draft
This document is the property of Micro Matic A/S and must not be used, disclosed or reproduced without prior written authority.
20-0
9-12
- 1
05-6
15
2
Make sure you have all components as shown on the picture.
Flexi-Draft
Place O-ring on the font as shown on the picture.
Mount the font and make sure that the cable will not be squeezed.
Fig. 1
Fig. 2
Fig. 3
O-ring
Nut
Cable guidance
Funnel
Cables
Font
3
Fit the cable in the ring for cable guidance as shown on the picture.
Mount the nut with tool.
Fig. 4
Fig. 6
Flexi-Draft
Mount the funnel.
Fig. 7
4
Flexi-Draft
Connect the cables. Connect to the power supply.
Fig. 10
Fig. 11
Kit for big wheels (if supplied). Mount the wheels in the pre-threaded holes in the bottom of the fridge.
Fig. 12
Kit for small wheels (if supplied). Mount the wheels in the pre-threaded holes in the bottom of the fridge.
5
Flexi-Draft
Kit for adjustable legs (if supplied). Mount the legs in the pre-threaded holes in the bottom of the fridge.
Fig. 13