mounting parts title - manometr-kharkiv.com€¦ · ost (ОСТ) 24.125.15-89), type 1009.041...
TRANSCRIPT
List of mounting parts
Table Q.1 – valve blocks, 3- and 5-valve blocks
Item
Name
Outline design
Version Ordering
code М… D PN, МПа
1
Valve block
– 25 1
– 40 1Р4
2
Valve block with
fittings
М20х1,5 25 2
40 2Р4
G1/2´´ 25 2G
40 2Р4G
3
3-valve block
– 25 3
– 40 3Р4
5-valve block
– 25 3V5
– 40 3V5Р4
4
3-valve block
with fittings
М20х1,5 25 4
40 4Р4
G1/2´´ 25 4G
40 4Р4G
5-valve block
with fittings
М20х1,5 25 4V5
40 4V5Р4
G1/2´´ 25 4V5G
40 4V5Р4G
Note - conventionally designated: dimension D – thread for process connection (inlet to valve
block). Other dimensions and types of thread D – on request.
In tables Q.1-Q.5 all mounting parts are presented which are included in mounting kits Н1-Н55.
Note – for valve blocks in one-, two-, three-, five-valve configuration, the abbreviation used is - 1-, 2-, 3-, 5-
valve block.
Mounting parts positions (column «Item» in tables Q.1-Q.5) correspond to the tables and figures in Appendices
F, G, I, Ia, J, Ja, Jb.
Each mounting part can be delivered complete in sets with a transmitter or separately. Ordering code for separate
parts (М...) is specified in tables Q.1-Q.5. Order form – according to section B.5.
Table Q.2 –1- and 2-valve blocks
Item
Name
Outline
design
Version Ordering
code М… D T K
PN, МПа
5
1-valve block
С- type
(with coupling nut
for transmitter
connection)
М20х1,5 М20х1,5 – 25 5
40 5Р4
G1/2´´ М20х1,5 – 25 5GМ
40 5Р4GМ
G1/2´´ G1/2´´ – 25 5GG
40 5Р4GG
М20х1,5 G1/2´´ – 25 5MG
40 5Р4MG
2-valve block
С-type
(with coupling nut
for transmitter
connection)
М20х1,5 М20х1,5 М20х1,5 25 5V2
40 5V2Р4
G1/2´´ М20х1,5 М20х1,5 25 5V2GМM
40 5V2Р4GМM
G1/2´´ G1/2´´ М20х1,5 25 5V2GGM
40 5V2Р4GGM
М20х1,5 G1/2´´ М20х1,5 25 5V2MGM
40 5V2Р4MGM
М20х1,5 М20х1,5 G1/2´´ 25 5V2MMG
40 5V2Р4MMG
G1/2´´ М20х1,5 G1/2´´ 25 5V2GMG
40 5V2Р4GMG
G1/2´´ G1/2´´ G1/2´´ 25 5V2GGG
40 5V2Р4GGG
М20х1,5 G1/2´´ G1/2´´ 25 5V2MGG
40 5V2Р4MGG
Continuation of Table Q.2
Item Name
Outline
design
Version Ordering code
М… D T K PN, МПа
5
1-valve block
A- type
(with female
thread for
transmitter
connection)
М20х1,5 М20х1,5 – 25 5А
40 5АР4
G1/2´´ М20х1,5 – 25 5АGМ
40 5АР4GМ
G1/2´´ G1/2´´ – 25 5АGG
40 5АР4GG
М20х1,5 G1/2´´ – 25 5АMG
40 5АР4MG
2-valve block
type А (with female
thread for
transmitter
connection)
М20х1,5 М20х1,5 М20х1,5 25 5АV2
40 5АV2Р4
G1/2´´ М20х1,5 М20х1,5 25 5АV2GМM
40 5АV2Р4GМM
G1/2´´ G1/2´´ М20х1,5 25 5АV2GGM
40 5АV2Р4GGM
М20х1,5 G1/2´´ М20х1,5 25 5АV2MGM
40 5АV2Р4MGM
М20х1,5 М20х1,5 G1/2´´ 25 5АV2MMG
40 5АV2Р4MMG
G1/2´´ М20х1,5 G1/2´´ 25 5АV2GMG
40 5АV2Р4GMG
G1/2´´ G1/2´´ G1/2´´ 25 5АV2GGG
40 5АV2Р4GGG
М20х1,5 G1/2´´ G1/2´´ 25 5АV2MGG
40 5АV2Р4MGG
End of Table Q.2
Item
Name
Outline design
Version
Ordering
code М… D T K PN, МПа
5
1-valve block
of В- type
(with male thread
for transmitter
connection)
М20х1,5 М20х1,5 – 25 5В
40 5ВР4
G1/2´´ М20х1,5 – 25 5ВGМ
40 5ВР4GМ
G1/2´´ G1/2´´ – 25 5ВGG
40 5ВР4GG
М20х1,5 G1/2´´ – 25 5ВMG
40 5ВР4MG
2-valve block of В- type
(with male thread
for transmitter
connection)
М20х1,5 М20х1,5 М20х1,5 25 5ВV2
40 5ВV2Р4
G1/2´´ М20х1,5 М20х1,5 25 5ВV2GМM
40 5ВV2Р4GМM
G1/2´´ G1/2´´ М20х1,5 25 5ВV2GGM
40 5ВV2Р4GGM
М20х1,5 G1/2´´ М20х1,5 25 5ВV2MGM
40 5ВV2Р4MGM
М20х1,5 М20х1,5 G1/2´´ 25 5ВV2MMG
40 5ВV2Р4MMG
G1/2´´ М20х1,5 G1/2´´ 25 5ВV2GMG
40 5ВV2Р4GMG
G1/2´´ G1/2´´ G1/2´´ 25 5ВV2GGG
40 5ВV2Р4GGG
М20х1,5 G1/2´´ G1/2´´ 25 5ВV2MGG
40 5ВV2Р4MGG
Notes
1. Conventionally designated: D – process connection thread (inlet in the valve block), Т – thread for
connection of pressure transmitter (outlet from valve block), К – thread for connecting the drain line or
pressure calibrator. Other dimensions and thread types D, Т, К – on request.
The advantage of using a valve block of С type instead of a valve block of А-type is a possibility to
place the handle can be placed in the most convenient position for maintenance..
Table Q.3 – shut-off valves
Item Name Outline design
Version Ordering code
М… DN1 DN2 Pp, MPa
t,°C
6
Shut-off bellows
valve
КС1
10 10
20 300 6
18 350 6N2
14 335 6N3
15 15
20 300 6D15
18 350 6D15N2
14 335 6D15N3
15 10
20 300 6D1510
18 350 6D1510N2
14 335 6D1510N3
10 15
20 300 6D1015
18 350 6D1015N2
14 335 6D1015N3
Shut-off valve
КА1
DN1 DN2 PN, MPa
Tmax, °C
–
10 10 40 250 6H
15 15 40 250 6HD15
15 10 40 250 6HD1510
10 15 40 250 6HD1015
Notes
1. Conventionally designated: DN1 – the nominal diameter of the connecting pipe at the valve
inlet (before the valve), DN2 – nominal diameter of the connecting pipe at the valve outlet (after
the valve), Рр – design pressure (maximum working pressure) for bellows valve, t – design
temperature for bellows valve, PN – rated pressure for a stop valve, Tmax – maximum
medium temperature for a stop valve. Other values of Рр, t, PN, Tmax – on request.
2. Valves are designed to be mounted on the pipeline by welding. Other valve versions for
mounting without welding – on request.
Separate supply of bellows valves КС1 according to Specifications ТTU U 28.1-24275859-
006:2016 [4] is possible.
Table Q.4 – Other mounting parts included in mounting kits Н1-Н55
Item
Name
Outline design Material, version Ordering
code М…
7 Сounter manifold (Note 1)
corrosion-
resistant steel
DN 50 7
DN 80 7Д8
steel 20 + zinc
coated
DN 50 7У
DN 80 7УД8
8
Сounter manifold (Note 1)
(for transmitters
2536, 2537 and
2547)
corrosion-
resistant steel
DN 50 8
DN 65 8Д6
DN 80 8Д8
steel 20 + zinc
coated
DN 50 8У
DN 65 8УД6
DN 80 8УД8
9 Сounter flange (Note
1)
corrosion-
resistant steel
DN 50 9
DN 80 9Д8
steel 20 + zinc
coated
DN 50 9У
DN 80 9УД8
10 Nipple for the
flange
corrosion-resistant steel 10
steel 20 + zinc coated 10У
11 Nipple for the nut
corrosion-resistant steel 11
steel 20 + zinc coated 11У
12 Supporting bracket
for differential
pressure transmitters
carbon steel + zinc coated
12
Continuation of Table Q.4
Item
Name
Outline design
Material, version
Designation as
per Design
Documentation
Ordering
code
М…
13 Supporting
bracket for
valve block
carbon steel + zinc-coated ITEK.733121.004 13
14
Supporting
bracket for
gauge pressure
transmitters
carbon steel + zinc-coated ITEK.733121.006 14
15 Bracket
steel 35 + zinc-coated ITEK.746714.001 15
16 Mounting
bracket of the
level gage
corrosion-resistant steel ITEK.745463.001 16
18 Double fitting (Note 2)
corrosion-
resistant steel
М20х1,5 ITEK.753128.005 18
G1/2˝ ITEK.753128.005-01 18G
19 Flange for the
Nipple
corrosion-resistant steel ITEK.753163.002-01 19
steel 35 + zinc-coated ITEK.753163.002 19У
20 Flange (Note 2)
corrosion-
resistant steel
М20х1,5 ITEK.753163.003 20
G1/2˝ ITEK.753163.003-01 20G
21 Flange
corrosion-
resistant steel
К1/4˝ ITEK.753164.001-01 21
К1/2˝ ITEK.753164.002-01 21К12
steel 20 + zinc-
coated
К1/4˝ ITEK.753164.001 21У
К1/2˝ ITEK.753164.002 21УК12
End of table Q.4
Item Name Outline design Material, version Ordering
code М…
22 Gasket
paronite DN 50 22
DN 80 22Д8
23 Gasket (for
transmitters 2536,
2537 and 2547) paronite
DN 50 23
DN 65 23Д6
DN 80 23Д8
24 Sealing ring
NBR rubber 24
fluorine rubber СКФ-26НМ 24F
26
Coupling nut (Note
2)
(equivalent of nut
1009.004 по
ТУ 34-42-386-
77)
steel 45 + zinc
coated
М20х1,5 26
G1/2˝ 26G
corrosion-
resistant steel
+ silver coated
М20х1,5 26S
G1/2˝ 26SG
27 Locking nut (Note 2)
steel 45 + zinc
coated
М20х1,5 27
G1/2˝ 27G
28 Gasket for the niple
teflon S=2,0 мм 28
copper S=1,5 мм 28D
corrosion-
resistant steel S=0,5 мм 28T
paronite S=2,0 мм 28R
Notes
Other dimensions for manifolds item 7, 8 and фланца item 9 – on request.
Other types of thread D for fittings item 18, flange item 20, nuts items 26 and 27 – on request.
Other materials different from those specified in table С.4 – on request.
Table Q.5 – Mounting parts for fastening included in kits Н1-Н55
Item and Ordering code
М… Name
29 Bolt М6х12
30 Bolt М10х14
31 Bolt М10х25
32 Bolt М10х40
33 Bolt М10х55
34 Bolt М10х70
35 Bolt М12х50
36 Bolt М16х50
37 Bolt М16х65
38 Nut М8
39 Nut М12
40 Nut М16
41 Washer 6
42 Washer 8
43 Washer 10
44 Washer 12
45 Washer 16
46 Pipe clip
47 Pipe clip
Note - It is allowed to use fasteners
manufactured according to other
regulatory documents, provided that the
same geometrical dimensions and
technical characteristics are maintained.
Table Q.6 – Optional mounting parts to be welded
Name
Outline design
Version Ordering
code М… Material
D1×S,
mm
D2×S,
mm
Adaptor 15х10,
type 1009.023
corrosion-
resistant steel 18×2,5 14×2 100
steel 20 18×2,5 14×2 100У
Composite adapter,
type 1009.024
1 – steel 20;
2 – corrosion-
resistant steel
16×2 14×2 101
1 and 2 –
corrosion-
resistant steel
17×2 14×2 102
1 – steel 20;
2 – corrosion-
resistant steel
14×2 14×2 103
18×2,5 18×2,5 104
Equal Tee (as per
OST (ОСТ)
24.125.15-89),
type 1009.041
corrosion-
resistant steel
14×2 – 105
18×2,5 – 106
steel 20 14×2 – 105У
18×2,5 – 106У
Reducing tee (as
per OST (ОСТ)
24.125.16-89),
type 1009.042
corrosion-
resistant steel 14×2 18×2,5 107
steel 20 14×2 18×2,5 107У
Nipple, type
1009.008
corrosion-
resistant steel 14×2 –
108
steel 20 108У
Choke DN15, type
1009.025
corrosion-
resistant steel 18×2,5 – 109
steel 20 109У
Choke DN10, type
1009.025-01
corrosion-
resistant steel 14×2 – 110
steel 20 110У
In Tables Q.6-Q.9, optional parts for mounting are presented that are not included in the maintaining kit, they are delivered as individual items complete with transmitter or separately. Ordering code as М..., РМ... or Т... is specified in Tables С.6-С9. Order form - according to B.5.
Table Q.7 – Optional mounting parts to be connected by threading connection
Name Outline design Version Ordering
code
М… Material D Т
Damping device
(PN 40 MPa)
corrosion-
resistant
steel
М20х1,5 М20х1,5 200
М20х1,5 G1/2´´ 200МG
G1/2´´ М20х1,5 200GМ
G1/2´´ G1/2´´ 200GG
Cooler (PN 40
MPa)
corrosion-
resistant
steel
М20х1,5 М20х1,5 201
М20х1,5 G1/2´´ 201МG
G1/2´´ М20х1,5 201GМ
G1/2´´ G1/2´´ 201GG
Coupling sleeve
(PN 40 MPa)
corrosion-
resistant steel М20х1,5 М20х1,5 202
Fitting,
type 1009.016
corrosion-
resistant steel
М20х1,5 М20х1,5 203
М20х1,5 G1/2´´ 203MG
Transition fitting
from tapered
thread to
М20х1,5
corrosion-
resistant steel М20х1,5
К1/4´´ 204
К1/2´´ 205
steel 20 + zinc-coated
М20х1,5 К1/4´´ 204У
К1/2´´ 205У
Transition fitting
corrosion-
resistant steel
G1/2´´ М20х1,5 206
М20х1,5 G1/2´´ 207
Notes
1. At the request of the customer, it is possible to manufacture and supply other mounting parts in accordance with TU 34-42-386-77 [5], as well as manufactured in accordance with the following technical documentation: - 1009.000 Operational Manual "Stainless steel products for the installation of instrumentation and automation in nuclear power plants. User's manual"; - 1035.000 Operational Manual “Carbon steel products for installation of primary converters of instrumentation and automation at nuclear power plants and thermal power plants. User's manual"; - A300.02 “Standardized parts and units for mounting instrumentation and automation equipment at thermal power plants. Part 2. Nodes and parts for installation of pressure, flow and level transmitters”. 2. Conventionally designated: D - thread for process connection (inlet to the mounting product), T - thread for the transmitter (exit from the mounting product). Other dimensions D, T on request. 3. The length of the connecting sleeve in the unfolded position is 2600 ± 100 mm.
Table Q.8 – Diaphragm Seals
Model,
description
Outline design Version
Ordering code РМ… Material D Т
For transmitters with РU 0.025…4.000 MPa
2010 thread (fitting)
process
connection
(instead of models
2319, 5319)
corrosion-
resistant steel
М20х1,5 М20х1,
5 2010
М20х1,5 G1/2´´ 2010МG
G1/2´´ М20х1,
5 2010GМ
G1/2´´ G1/2´´ 2010GG
same +
teflon-coated
membrane
М20х1,5 М20х1,
5 2010F
М20х1,5 G1/2´´ 2010FМG
G1/2´´ М20х1,
5 2010FGМ
G1/2´´ G1/2´´ 2010FGG
2110 flange process
connection
(standard flange
DN50)
corrosion-
resistant steel
– М20х1,
5 2110
– G1/2´´ 2110G
same +
teflon-coated
membrane
– М20х1,
5 2110F
– G1/2´´ 2110FG
2111 special flange
process
connection
(instead of models
2320, 5320)
Bolts М10х35 (8 pcs.) are included in the set
(not shown in the outline design)
corrosion-
resistant steel
– М20х1,
5 2111
– G1/2´´ 2111G
same +
teflon-coated
membrane
– М20х1,5 2111F
– G1/2´´ 2111FG
For transmitters with РU 4…63 MPa
2321 thread (fitting)
process
connection
corrosion-
resistant steel
М20х1,5 М20х1,
5 2321
М20х1,5 G1/2´´ 2321МG
G1/2´´ М20х1,
5 2321GМ
G1/2´´ G1/2´´ 2321GG
same + teflon-
coated
membrane
М20х1,5 М20х1,
5 2321F
М20х1,5 G1/2´´ 2321FМG
G1/2´´ М20х1,
5 2321FGМ
G1/2´´ G1/2´´ 2321FGG
2322
Special flange
process
connection
Bolts М14х1,5х35 (8 pcs.) are included in the
set (not shown in the outline design)
corrosion-
resistant steel
– М20х1,
5 2322
– G1/2´´ 2322G
same +
teflon-coated
membrane
– М20х1,5 2322F
– G1/2´´ 2322FG
Note
1. Identifying codes: D - thread for connection to the process (inlet into the product), T - thread for connecting
the pressure transmitter (exit from the product). Other sizes and types of threads D, T - on request.
Filling separators performed by the user after installation. It is possible to order delivery of the filled separators as a
part of system.
Table Q.9 – Cold-deformed seamless pipelines for supplying impulse lines to
transmitters
Standard size
DEXT×S, mm Material
Regulatory document according
to which the pipe is supplied
Ordering code
Т…
14×2
corrosion-resistant
steel
TU 14-3-197:2006 [6] 14
GOST 9941-81 14Н
steel 20 TU 14-3-190-2004 [7] 14У
GOST 8734-75 14УН
16×2
corrosion-resistant
steel
TU 14-3-197:2006 [6] 16
GOST 9941-81 16Н
steel 20 TU 14-3-190-2004 [7] 16У
GOST 8734-75 16УН
18×2,5
corrosion-resistant
steel
TU 14-3-197:2006 [6] 18
GOST 9941-81 18Н
steel 20 TU 14-3-190-2004 [7] 18У
GOST 8734-75 18УН
Note – Other types of pipes – on request.
List of mounting parts
Table Q.1 – valve blocks, 3- and 5-valve blocks
Item
Name
Outline design
Version Ordering
code М… D PN, МПа
1
Valve block
– 25 1
– 40 1Р4
2
Valve block with
fittings
М20х1,5 25 2
40 2Р4
G1/2´´ 25 2G
40 2Р4G
3
3-valve block
– 25 3
– 40 3Р4
5-valve block
– 25 3V5
– 40 3V5Р4
4
3-valve block
with fittings
М20х1,5 25 4
40 4Р4
G1/2´´ 25 4G
40 4Р4G
5-valve block
with fittings
М20х1,5 25 4V5
40 4V5Р4
G1/2´´ 25 4V5G
40 4V5Р4G
Note - conventionally designated: dimension D – thread for process connection (inlet to valve
block). Other dimensions and types of thread D – on request.
In tables Q.1-Q.5 all mounting parts are presented which are included in mounting kits Н1-Н55.
Note – for valve blocks in one-, two-, three-, five-valve configuration, the abbreviation used is - 1-, 2-, 3-, 5-
valve block.
Mounting parts positions (column «Item» in tables Q.1-Q.5) correspond to the tables and figures in Appendices
F, G, I, Ia, J, Ja, Jb.
Each mounting part can be delivered complete in sets with a transmitter or separately. Ordering code for separate
parts (М...) is specified in tables Q.1-Q.5. Order form – according to section B.5.
Table Q.2 –1- and 2-valve blocks
Item
Name
Outline
design
Version Ordering
code М… D T K
PN, МПа
5
1-valve block
С- type
(with coupling nut
for transmitter
connection)
М20х1,5 М20х1,5 – 25 5
40 5Р4
G1/2´´ М20х1,5 – 25 5GМ
40 5Р4GМ
G1/2´´ G1/2´´ – 25 5GG
40 5Р4GG
М20х1,5 G1/2´´ – 25 5MG
40 5Р4MG
2-valve block
С-type
(with coupling nut
for transmitter
connection)
М20х1,5 М20х1,5 М20х1,5 25 5V2
40 5V2Р4
G1/2´´ М20х1,5 М20х1,5 25 5V2GМM
40 5V2Р4GМM
G1/2´´ G1/2´´ М20х1,5 25 5V2GGM
40 5V2Р4GGM
М20х1,5 G1/2´´ М20х1,5 25 5V2MGM
40 5V2Р4MGM
М20х1,5 М20х1,5 G1/2´´ 25 5V2MMG
40 5V2Р4MMG
G1/2´´ М20х1,5 G1/2´´ 25 5V2GMG
40 5V2Р4GMG
G1/2´´ G1/2´´ G1/2´´ 25 5V2GGG
40 5V2Р4GGG
М20х1,5 G1/2´´ G1/2´´ 25 5V2MGG
40 5V2Р4MGG
Continuation of Table Q.2
Item Name
Outline
design
Version Ordering code
М… D T K PN, МПа
5
1-valve block
A- type
(with female
thread for
transmitter
connection)
М20х1,5 М20х1,5 – 25 5А
40 5АР4
G1/2´´ М20х1,5 – 25 5АGМ
40 5АР4GМ
G1/2´´ G1/2´´ – 25 5АGG
40 5АР4GG
М20х1,5 G1/2´´ – 25 5АMG
40 5АР4MG
2-valve block
type А (with female
thread for
transmitter
connection)
М20х1,5 М20х1,5 М20х1,5 25 5АV2
40 5АV2Р4
G1/2´´ М20х1,5 М20х1,5 25 5АV2GМM
40 5АV2Р4GМM
G1/2´´ G1/2´´ М20х1,5 25 5АV2GGM
40 5АV2Р4GGM
М20х1,5 G1/2´´ М20х1,5 25 5АV2MGM
40 5АV2Р4MGM
М20х1,5 М20х1,5 G1/2´´ 25 5АV2MMG
40 5АV2Р4MMG
G1/2´´ М20х1,5 G1/2´´ 25 5АV2GMG
40 5АV2Р4GMG
G1/2´´ G1/2´´ G1/2´´ 25 5АV2GGG
40 5АV2Р4GGG
М20х1,5 G1/2´´ G1/2´´ 25 5АV2MGG
40 5АV2Р4MGG
End of Table Q.2
Item
Name
Outline design
Version
Ordering
code М… D T K PN, МПа
5
1-valve block
of В- type
(with male thread
for transmitter
connection)
М20х1,5 М20х1,5 – 25 5В
40 5ВР4
G1/2´´ М20х1,5 – 25 5ВGМ
40 5ВР4GМ
G1/2´´ G1/2´´ – 25 5ВGG
40 5ВР4GG
М20х1,5 G1/2´´ – 25 5ВMG
40 5ВР4MG
2-valve block of В- type
(with male thread
for transmitter
connection)
М20х1,5 М20х1,5 М20х1,5 25 5ВV2
40 5ВV2Р4
G1/2´´ М20х1,5 М20х1,5 25 5ВV2GМM
40 5ВV2Р4GМM
G1/2´´ G1/2´´ М20х1,5 25 5ВV2GGM
40 5ВV2Р4GGM
М20х1,5 G1/2´´ М20х1,5 25 5ВV2MGM
40 5ВV2Р4MGM
М20х1,5 М20х1,5 G1/2´´ 25 5ВV2MMG
40 5ВV2Р4MMG
G1/2´´ М20х1,5 G1/2´´ 25 5ВV2GMG
40 5ВV2Р4GMG
G1/2´´ G1/2´´ G1/2´´ 25 5ВV2GGG
40 5ВV2Р4GGG
М20х1,5 G1/2´´ G1/2´´ 25 5ВV2MGG
40 5ВV2Р4MGG
Notes
1. Conventionally designated: D – process connection thread (inlet in the valve block), Т – thread for
connection of pressure transmitter (outlet from valve block), К – thread for connecting the drain line or
pressure calibrator. Other dimensions and thread types D, Т, К – on request.
The advantage of using a valve block of С type instead of a valve block of А-type is a possibility to
place the handle can be placed in the most convenient position for maintenance..
Table Q.3 – shut-off valves
Item Name Outline design
Version Ordering code
М… DN1 DN2 Pp, MPa
t,°C
6
Shut-off bellows
valve
КС1
10 10
20 300 6
18 350 6N2
14 335 6N3
15 15
20 300 6D15
18 350 6D15N2
14 335 6D15N3
15 10
20 300 6D1510
18 350 6D1510N2
14 335 6D1510N3
10 15
20 300 6D1015
18 350 6D1015N2
14 335 6D1015N3
Shut-off valve
КА1
DN1 DN2 PN, MPa
Tmax, °C
–
10 10 40 250 6H
15 15 40 250 6HD15
15 10 40 250 6HD1510
10 15 40 250 6HD1015
Notes
1. Conventionally designated: DN1 – the nominal diameter of the connecting pipe at the valve
inlet (before the valve), DN2 – nominal diameter of the connecting pipe at the valve outlet (after
the valve), Рр – design pressure (maximum working pressure) for bellows valve, t – design
temperature for bellows valve, PN – rated pressure for a stop valve, Tmax – maximum
medium temperature for a stop valve. Other values of Рр, t, PN, Tmax – on request.
2. Valves are designed to be mounted on the pipeline by welding. Other valve versions for
mounting without welding – on request.
Separate supply of bellows valves КС1 according to Specifications ТTU U 28.1-24275859-
006:2016 [4] is possible.
Table Q.4 – Other mounting parts included in mounting kits Н1-Н55
Item
Name
Outline design Material, version Ordering
code М…
7 Сounter manifold (Note 1)
corrosion-
resistant steel
DN 50 7
DN 80 7Д8
steel 20 + zinc
coated
DN 50 7У
DN 80 7УД8
8
Сounter manifold (Note 1)
(for transmitters
2536, 2537 and
2547)
corrosion-
resistant steel
DN 50 8
DN 65 8Д6
DN 80 8Д8
steel 20 + zinc
coated
DN 50 8У
DN 65 8УД6
DN 80 8УД8
9 Сounter flange (Note
1)
corrosion-
resistant steel
DN 50 9
DN 80 9Д8
steel 20 + zinc
coated
DN 50 9У
DN 80 9УД8
10 Nipple for the
flange
corrosion-resistant steel 10
steel 20 + zinc coated 10У
11 Nipple for the nut
corrosion-resistant steel 11
steel 20 + zinc coated 11У
12 Supporting bracket
for differential
pressure transmitters
carbon steel + zinc coated
12
Continuation of Table Q.4
Item
Name
Outline design
Material, version
Designation as
per Design
Documentation
Ordering
code
М…
13 Supporting
bracket for
valve block
carbon steel + zinc-coated ITEK.733121.004 13
14
Supporting
bracket for
gauge pressure
transmitters
carbon steel + zinc-coated ITEK.733121.006 14
15 Bracket
steel 35 + zinc-coated ITEK.746714.001 15
16 Mounting
bracket of the
level gage
corrosion-resistant steel ITEK.745463.001 16
18 Double fitting (Note 2)
corrosion-
resistant steel
М20х1,5 ITEK.753128.005 18
G1/2˝ ITEK.753128.005-01 18G
19 Flange for the
Nipple
corrosion-resistant steel ITEK.753163.002-01 19
steel 35 + zinc-coated ITEK.753163.002 19У
20 Flange (Note 2)
corrosion-
resistant steel
М20х1,5 ITEK.753163.003 20
G1/2˝ ITEK.753163.003-01 20G
21 Flange
corrosion-
resistant steel
К1/4˝ ITEK.753164.001-01 21
К1/2˝ ITEK.753164.002-01 21К12
steel 20 + zinc-
coated
К1/4˝ ITEK.753164.001 21У
К1/2˝ ITEK.753164.002 21УК12
End of table Q.4
Item Name Outline design Material, version Ordering
code М…
22 Gasket
paronite DN 50 22
DN 80 22Д8
23 Gasket (for
transmitters 2536,
2537 and 2547) paronite
DN 50 23
DN 65 23Д6
DN 80 23Д8
24 Sealing ring
NBR rubber 24
fluorine rubber СКФ-26НМ 24F
26
Coupling nut (Note
2)
(equivalent of nut
1009.004 по
ТУ 34-42-386-
77)
steel 45 + zinc
coated
М20х1,5 26
G1/2˝ 26G
corrosion-
resistant steel
+ silver coated
М20х1,5 26S
G1/2˝ 26SG
27 Locking nut (Note 2)
steel 45 + zinc
coated
М20х1,5 27
G1/2˝ 27G
28 Gasket for the niple
teflon S=2,0 мм 28
copper S=1,5 мм 28D
corrosion-
resistant steel S=0,5 мм 28T
paronite S=2,0 мм 28R
Notes
Other dimensions for manifolds item 7, 8 and фланца item 9 – on request.
Other types of thread D for fittings item 18, flange item 20, nuts items 26 and 27 – on request.
Other materials different from those specified in table С.4 – on request.
Table Q.5 – Mounting parts for fastening included in kits Н1-Н55
Item and Ordering code
М… Name
29 Bolt М6х12
30 Bolt М10х14
31 Bolt М10х25
32 Bolt М10х40
33 Bolt М10х55
34 Bolt М10х70
35 Bolt М12х50
36 Bolt М16х50
37 Bolt М16х65
38 Nut М8
39 Nut М12
40 Nut М16
41 Washer 6
42 Washer 8
43 Washer 10
44 Washer 12
45 Washer 16
46 Pipe clip
47 Pipe clip
Note - It is allowed to use fasteners
manufactured according to other
regulatory documents, provided that the
same geometrical dimensions and
technical characteristics are maintained.
Table Q.6 – Optional mounting parts to be welded
Name
Outline design
Version Ordering
code М… Material
D1×S,
mm
D2×S,
mm
Adaptor 15х10,
type 1009.023
corrosion-
resistant steel 18×2,5 14×2 100
steel 20 18×2,5 14×2 100У
Composite adapter,
type 1009.024
1 – steel 20;
2 – corrosion-
resistant steel
16×2 14×2 101
1 and 2 –
corrosion-
resistant steel
17×2 14×2 102
1 – steel 20;
2 – corrosion-
resistant steel
14×2 14×2 103
18×2,5 18×2,5 104
Equal Tee (as per
OST (ОСТ)
24.125.15-89),
type 1009.041
corrosion-
resistant steel
14×2 – 105
18×2,5 – 106
steel 20 14×2 – 105У
18×2,5 – 106У
Reducing tee (as
per OST (ОСТ)
24.125.16-89),
type 1009.042
corrosion-
resistant steel 14×2 18×2,5 107
steel 20 14×2 18×2,5 107У
Nipple, type
1009.008
corrosion-
resistant steel 14×2 –
108
steel 20 108У
Choke DN15, type
1009.025
corrosion-
resistant steel 18×2,5 – 109
steel 20 109У
Choke DN10, type
1009.025-01
corrosion-
resistant steel 14×2 – 110
steel 20 110У
In Tables Q.6-Q.9, optional parts for mounting are presented that are not included in the maintaining kit, they are delivered as individual items complete with transmitter or separately. Ordering code as М..., РМ... or Т... is specified in Tables С.6-С9. Order form - according to B.5.
Table Q.7 – Optional mounting parts to be connected by threading connection
Name Outline design Version Ordering
code
М… Material D Т
Damping device
(PN 40 MPa)
corrosion-
resistant
steel
М20х1,5 М20х1,5 200
М20х1,5 G1/2´´ 200МG
G1/2´´ М20х1,5 200GМ
G1/2´´ G1/2´´ 200GG
Cooler (PN 40
MPa)
corrosion-
resistant
steel
М20х1,5 М20х1,5 201
М20х1,5 G1/2´´ 201МG
G1/2´´ М20х1,5 201GМ
G1/2´´ G1/2´´ 201GG
Coupling sleeve
(PN 40 MPa)
corrosion-
resistant steel М20х1,5 М20х1,5 202
Fitting,
type 1009.016
corrosion-
resistant steel
М20х1,5 М20х1,5 203
М20х1,5 G1/2´´ 203MG
Transition fitting
from tapered
thread to
М20х1,5
corrosion-
resistant steel М20х1,5
К1/4´´ 204
К1/2´´ 205
steel 20 + zinc-coated
М20х1,5 К1/4´´ 204У
К1/2´´ 205У
Transition fitting
corrosion-
resistant steel
G1/2´´ М20х1,5 206
М20х1,5 G1/2´´ 207
Notes
1. At the request of the customer, it is possible to manufacture and supply other mounting parts in accordance with TU 34-42-386-77 [5], as well as manufactured in accordance with the following technical documentation: - 1009.000 Operational Manual "Stainless steel products for the installation of instrumentation and automation in nuclear power plants. User's manual"; - 1035.000 Operational Manual “Carbon steel products for installation of primary converters of instrumentation and automation at nuclear power plants and thermal power plants. User's manual"; - A300.02 “Standardized parts and units for mounting instrumentation and automation equipment at thermal power plants. Part 2. Nodes and parts for installation of pressure, flow and level transmitters”. 2. Conventionally designated: D - thread for process connection (inlet to the mounting product), T - thread for the transmitter (exit from the mounting product). Other dimensions D, T on request. 3. The length of the connecting sleeve in the unfolded position is 2600 ± 100 mm.
Table Q.8 – Diaphragm Seals
Model,
description
Outline design Version
Ordering code РМ… Material D Т
For transmitters with РU 0.025…4.000 MPa
2010 thread (fitting)
process
connection
(instead of models
2319, 5319)
corrosion-
resistant steel
М20х1,5 М20х1,
5 2010
М20х1,5 G1/2´´ 2010МG
G1/2´´ М20х1,
5 2010GМ
G1/2´´ G1/2´´ 2010GG
same +
teflon-coated
membrane
М20х1,5 М20х1,
5 2010F
М20х1,5 G1/2´´ 2010FМG
G1/2´´ М20х1,
5 2010FGМ
G1/2´´ G1/2´´ 2010FGG
2110 flange process
connection
(standard flange
DN50)
corrosion-
resistant steel
– М20х1,
5 2110
– G1/2´´ 2110G
same +
teflon-coated
membrane
– М20х1,
5 2110F
– G1/2´´ 2110FG
2111 special flange
process
connection
(instead of models
2320, 5320)
Bolts М10х35 (8 pcs.) are included in the set
(not shown in the outline design)
corrosion-
resistant steel
– М20х1,
5 2111
– G1/2´´ 2111G
same +
teflon-coated
membrane
– М20х1,5 2111F
– G1/2´´ 2111FG
For transmitters with РU 4…63 MPa
2321 thread (fitting)
process
connection
corrosion-
resistant steel
М20х1,5 М20х1,
5 2321
М20х1,5 G1/2´´ 2321МG
G1/2´´ М20х1,
5 2321GМ
G1/2´´ G1/2´´ 2321GG
same + teflon-
coated
membrane
М20х1,5 М20х1,
5 2321F
М20х1,5 G1/2´´ 2321FМG
G1/2´´ М20х1,
5 2321FGМ
G1/2´´ G1/2´´ 2321FGG
2322
Special flange
process
connection
Bolts М14х1,5х35 (8 pcs.) are included in the
set (not shown in the outline design)
corrosion-
resistant steel
– М20х1,
5 2322
– G1/2´´ 2322G
same +
teflon-coated
membrane
– М20х1,5 2322F
– G1/2´´ 2322FG
Note
1. Identifying codes: D - thread for connection to the process (inlet into the product), T - thread for connecting
the pressure transmitter (exit from the product). Other sizes and types of threads D, T - on request.
Filling separators performed by the user after installation. It is possible to order delivery of the filled separators as a
part of system.
Table Q.9 – Cold-deformed seamless pipelines for supplying impulse lines to
transmitters
Standard size
DEXT×S, mm Material
Regulatory document according
to which the pipe is supplied
Ordering code
Т…
14×2
corrosion-resistant
steel
TU 14-3-197:2006 [6] 14
GOST 9941-81 14Н
steel 20 TU 14-3-190-2004 [7] 14У
GOST 8734-75 14УН
16×2
corrosion-resistant
steel
TU 14-3-197:2006 [6] 16
GOST 9941-81 16Н
steel 20 TU 14-3-190-2004 [7] 16У
GOST 8734-75 16УН
18×2,5
corrosion-resistant
steel
TU 14-3-197:2006 [6] 18
GOST 9941-81 18Н
steel 20 TU 14-3-190-2004 [7] 18У
GOST 8734-75 18УН
Note – Other types of pipes – on request.