moxon vise 4 - wordpress.com · vise screws (1" acme threaded rod). use a 1.5" forstner...
TRANSCRIPT
![Page 1: Moxon Vise 4 - WordPress.com · vise screws (1" Acme threaded rod). Use a 1.5" forstner bit to counterbore the inside face 1" deep. Trace the outline of the nuts and chop to complete](https://reader030.vdocument.in/reader030/viewer/2022041122/5f3712f0798de617a7366811/html5/thumbnails/1.jpg)
7
5
1
2
3
6
4Moxon Vise
ITEM NO. PART NUMBER QTY.1 Brace 12 RearJaw 13 FrontJaw 14 Nut 65 Acme 26 HandleShaft 47 BallBearing 4
![Page 2: Moxon Vise 4 - WordPress.com · vise screws (1" Acme threaded rod). Use a 1.5" forstner bit to counterbore the inside face 1" deep. Trace the outline of the nuts and chop to complete](https://reader030.vdocument.in/reader030/viewer/2022041122/5f3712f0798de617a7366811/html5/thumbnails/2.jpg)
5.750
32.000
1.000 3.500
2.750
32.000
2.000
2.000
5.750
Front Vise Jaw
![Page 3: Moxon Vise 4 - WordPress.com · vise screws (1" Acme threaded rod). Use a 1.5" forstner bit to counterbore the inside face 1" deep. Trace the outline of the nuts and chop to complete](https://reader030.vdocument.in/reader030/viewer/2022041122/5f3712f0798de617a7366811/html5/thumbnails/3.jpg)
5.500
38.000
3.000
4.000 25.000
2.750
A
2.000
38.000
5.500
2.000
1.500
DETAIL A SCALE 1 : 1
Construction notes: Layout and drill 1" through holes for the vise screws (1" Acme threaded rod). Use a 1.5" forstner bit tocounterbore the inside face 1" deep. Trace the outline of the nuts and chop to complete the recess for the front nuts.
Full Scale Template
Rear Vise Jaw
![Page 4: Moxon Vise 4 - WordPress.com · vise screws (1" Acme threaded rod). Use a 1.5" forstner bit to counterbore the inside face 1" deep. Trace the outline of the nuts and chop to complete](https://reader030.vdocument.in/reader030/viewer/2022041122/5f3712f0798de617a7366811/html5/thumbnails/4.jpg)
1.750
32.000
3.000
32.000
3.000
1.750
1.75" wide face is glued to back ofrear vise jaw as a stabilizer
Full Scale
1/2" round steel rod for handle
Rear Brace & Handle Weldment