mt 1030 s-en-700022 spec manitou 1030 s.pdf · hydraulic pump operating at 250 barsand supplying a...
TRANSCRIPT
• Capacity : 3000 kg
• Lift height : 9.98 m
• Compact stabilizers
• Load Place System (LPS)
• Torque convertor transmission
MT 1030 S
Exceptional lifting performances…
84 HP Perkins Engine and torque convertertransmission driving a 4 ratio gear box,perfectly suited for travelling on the road.7350 daN drawbar pull enabling fastachievement of any loading task.
Hydraulic Pump operating at250 bars and supplyinga 105 l/mn flowSimultaneity of hydraulic functionsand 5350 daN tear out force
…without compromisingcompactness
To match daily handlingrequirements, the MT 1030 Soffers 2 m forward reachat maximum height andperfect stability witha 1.2 ton load at 6 min front of the wheels.
2.26 m
2.21 m
1.2 t6 m
9.98 m
0.78 m
0.44 m
All the power required for loading
Proportional and independant stabilizers lowering on a 2.21 m width.
Ideal in restricted spaces withminimum damage to the surface
Overall length up to carriage under 5 m and short rear overhang offer all thecompactness and maneuverability required in confined sites
Turning radius of 3.75 m for easy maneuvering.
4.99 m
Efficient on siteLoad Place System (LPS)Two proportional and simultaneous hydraulic functions in one hand
PLACING : Lift/Lower + Tel Out/Tel In
Brakes on bothaxles
LOADING : Lift/Lower + Crowd/Dump
Total safety
Dual lever system fitted directly onvalve bankTransmission cut off switch allocatingall the engine power to hydraulicperformances
As well as exceptionalperformances, the MT 1030 Soperates in total safetywhatever the environmentor the task to undertake.
ProgressiveSafe Load Indicator
* Option :Automatic cut off
of endangeringmovements
Total visibility
MT 1030 S
Lifting capacity ........................................3000 kgat 500 mm from forks heels.Tipping load at maximum reach ...................1160 kgTear at force with tootheddigging bucket (Iso 8313 - 1986) ...............5330 daN
Lifting height ............................................9.98 mTimes : Unladen/loaded (in s)Lifting ...........................................................6.7/9Lowering ....................................................5.2/5.4Simultaneous extension 1st and 2nd booms ...13.8/14.2Simultaneous retraction 1st and 2nd booms.......8.6/7.3Time unladen (in s)Crowding ............................................................3Dumping ..........................................................2.5
Tyres400/80 - 24 156 A8 TL
Forks (mm)Length...........................................................1200Width x thickness......................................125 X 45Maximum distance between forks......................1040Carriage rotation.............................................126°
Hydraulically operated brakeswith oil-immersed muldidiscs on both axles
Perkins EngineType .......................................................1104C-44Capacity..........................................4 cyl. 4400 cm3
Power (ISO 14396) : .........................82 HP/61.5 kwMaximum torque :....................302 Nm at 1400 rpmDirect injectionwater cooling
Transmission...............................Torque ConvertorElectro - Hydraulic reversing shift4 gears forward and reverseMaximum travel speed................................25 km/h
HydraulicsLifting/tilting pumpgear type : ................................250 bars /105 l/mnFlow divider with priority to steering and brakes.
CapacitiesCooling system.............................................18.5 l.Engine oil.....................................................10.5 l.Hydraulic oil ..................................................125 l.Transmission oil ............................................15.5 l.Fuel tank ......................................................120 l.
Weight unladen (with forks) ......................7470 kgOverall width ............................................2.26 mOverall height ...........................................2.30 mTurning radius (outside wheels) ..................3.75 mLength up to carriage................................4.99 mGround clearance ......................................0.44 mDrawbar pull..........................................8200 daN
Reach atmaximumheight :2 m
Under NormeEN 1459annexe B
mmA 1200B 2690C 1513C1 1602D 4992D1 5081D2 4064E 6192F 1846G 455G1 440G2 440G3 220I 789J 865K 1040L 45N 1690O 125P2 44°P3 53°R 3545S 7810T 3640U1 2300U2 2550V 4950V1 1310V2 3753V3 4200W 2261W1 2210W2 1132W3 340Y 12°Z 114°
Standard :- Beacon- Floating forks carriage- Attachment hydraulic line- Reverse alarm and lightsOptions :- Wide range of attachments(buckets, jibs, made to measure attachments)
- Air conditioning- Work lights- …
700022EN - BE 161/Ind. A