8/6/2019 Mt01 Assembly 01

1/9

8/6/2019 Mt01 Assembly 01

2/9

Please glue them by aligning

the red and red/blue and blue

parts if they are marked on

the paper.

2

Note

Basic working method and markingsTo begin

How to assemble

Tools and materials needed

Items of Caution

-Ruler - scissors - blade cutter or "Exacto-knife" - awl or

other pointed tool (for making a folding crease) - felt pen

- pin set - glue - hand towel ( for cleaning your fingers) -

dictionary or other heavy book ( to press the papers flat).

*Take care when using sharp or pointed objects or when

using bladed cutting tools. Place a heavy sheet of paper

under the paper you want to cut.

*Use glue and other adhesives only in well-ventilated

areas.

*When printing, use a slightly reduced font size. There

may be differences in dimensions, depending on the

type of printer used.

*Follow the working method and markings carefully.

*Cut carefully along the outter line with cutting blade,Exacto-knife or scissors.

One - point Advice

*Before beginning assembly, test adhesive amounts

on extra paper.

*Cut carefully with cutting blade, Exacto-knife or

scissors.

*Occasionally, white spots will be apparent on folds

and cuts. Use a marker or pencil to fill in these spots.

It is recommended that this be done after each stage

of assembly because coloring becomes more difficult

once parts are assembled.

*As an adhesive, white wood glue is recommended.

Avoid over application as this may cause the paper to

wrinkle.

*For folding parts, first use an awl or other pointed

tool to make a light crease along the dotted or solid

line. This will make the folds straight. Avoid making

strong creases, as this will cause the paper to tear.

Cut along these lines.

Dotted line

Fold along these lines.

The printed surface should beon the inside of the folded shape.

Broken lines

Fold along these lines.

The printed surface should be

on the outside of the folded shape.

Solid lines

Do not fold or cut the partsmarked .

Red dots are the reference

positions for gluing surfaces.

Cut out parts marked with an

asterisk(*).

8/6/2019 Mt01 Assembly 01

3/9

Reference photo

3

Indication of Working Methods

First, assemble each component by following the working

method and markings. Then, refer to the illustration and

photos below to glue the parts together.

Fold each relevant part according to the assembly symbols.

Please use the dots on each component as reference when gluing surfaces.

Fold or Curve Glue

Engine 1Sheet A, 16 parts in total

Engine 2

Sheet A, 6 parts in total Reference photo

1 Assembling the Engine

A--91(92)1(92)

A--89(90)9(90)

A--75(76)5(76)

A--83(82)3(82)

A--79(80)9(80)

A--81(84)1(84)

A--77(78)7(78)A--73(74)3(74)

A--71(72)1(72)

A--87(88)7(88)

A--85(86)5(86)

*Assemble both sides. The diagramshows the left side. The number insidethe ( ) is for the right side.

*Assemble both sides. The diagramshows the left side. The number insidethe ( ) is for the right side.

8/6/2019 Mt01 Assembly 01

4/9

4

Indication of Working Methods

First, assemble each component by following the working

method and markings. Then, refer to the illustration and

photos below to glue the parts together.

Fold each relevant part according to the assembly symbols.

Please use the dots on each component as reference when gluing surfaces.

Fold or Curve Glue

Engine 3Sheet A, 84 parts in total

1 Assembling the Engine

Reference photo

A--103(104)03(104)A--99(100)9(100)

A--93(94)3(94)

A--105(106)05(106)

A--59(60)9(60)A--67(68)7(68)

A--15(16)5(16)A--13(14)3(14)A--11(12)1(12)A--9(10)(10)

A--31(32)1(32)

A--63(64)3(64)A--55(56)5(56)A--47(48)7(48)A--39(40)9(40)

A--51(52)1(52)A--43(44)3(44)A--35(36)5(36)

A--37(38)7(38)A--45(46)5(46)A--53(54)3(54)A--61(62)1(62)A--69(70)9(70)

A--101(102)01(102)

A--27(28)7(28)

A--25(26)5(26)

A--23(24)3(24)

A--21(22)1(22)A--19(20)9(20)

A--17(18)7(18)

A--41(42)1(42)

A--65(66)5(66)A--57(58)7(58)A--49(50)9(50)

A--33(34)3(34)

A--29(30)9(30)

A--95(96)5(96)A--97(98)7(98)

A--7(8)(8)A--5(6)(6)

A--3(4)(4)A--1(2)(2)

*Assemble both sides. The diagramshows the left side. The number insidethe ( ) is for the right side.

8/6/2019 Mt01 Assembly 01

5/9

5

Indication of Working Methods

First, assemble each component by following the working

method and markings. Then, refer to the illustration and

photos below to glue the parts together.

Fold each relevant part according to the assembly symbols.

Please use the dots on each component as reference when gluing surfaces.

Fold or Curve Glue

Engine 4Sheet A, 7 parts in total

1 Assembling the Engine

Reference photo

Reference photo

Reference photo

Engine 5Sheet A, 3 parts in total

Intake

Sheet A, 7 parts in total

A--11919A--12121

A--12323

A--12525

A--11010A--10909

A--10808

A--11111

A--11717A--11616

A--11212A--11414

A--11515

A--12020A--12222

A--12424

A--11313

12

3

1 3Glue in order from to on the graphic.

* At this point, do not glue

A-120 and 119 on A-125.

8/6/2019 Mt01 Assembly 01

6/9

6

Indication of Working Methods

First, assemble each component by following the working

method and markings. Then, refer to the illustration and

photos below to glue the parts together.

Fold each relevant part according to the assembly symbols.

Please use the dots on each component as reference when gluing surfaces.

Fold or Curve Glue

1 Assembling the Engine

Engine 6Sheet A, 5 parts in total

Engine 7Sheet A, 4 parts in total

Engine 8

Sheet A, 2 parts in total

Reference photo

Reference photo

Reference photo

A--14747

A--14646

A--14343

A--14242

A--14040

A--12929

A--12828A--13030

A--13232A--13131

A--14141

1

2

1Glue in order from to on the graphic.2

8/6/2019 Mt01 Assembly 01

7/9

7

Reference photo

Indication of Working Methods

First, assemble each component by following the working

method and markings. Then, refer to the illustration and

photos below to glue the parts together.

Fold each relevant part according to the assembly symbols.

Please use the dots on each component as reference when gluing surfaces.

Fold or Curve Glue

EngineSheet A, 147 parts in total

1 Assembling the Engine

A--11818A--10707

A--13333

A--13434A--13535

A--13636

A--13939

A--14545

A--12727A--12626

A--13838

A--144441

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

19

20 20

A--13737

2

Connect each of the previously assembled parts inorder from - according to the diagram.1 20

Engine1

Engine2

Engine3

Engine4

Engine5

Engine6

Engine7

Engine8

[ The right side of engine ]

[ The rhe right side of engine ]ght side of engine ][ The right side of engine ]

8/6/2019 Mt01 Assembly 01

8/9

8

Indication of Working Methods

First, assemble each component by following the working

method and markings. Then, refer to the illustration and

photos below to glue the parts together.

Fold each relevant part according to the assembly symbols.

Please use the dots on each component as reference when gluing surfaces.

Fold or Curve Glue

Side Covers 1Sheet B, 1 parts in total

Side Covers 2Sheet B, 6 parts in total

Side Covers 3

Sheet B, 2 parts in total

2 Assembling the Side Covers

Reference photo

Reference photo

Reference photo

B--9

B--2B--3B--4B--5

B--7 B--6

B--1

B--8

8/6/2019 Mt01 Assembly 01

9/9