8/14/2019 Mt01 Assembly 02

1/10

8/14/2019 Mt01 Assembly 02

2/10

Please glue them by aligningthe red and red/blue and blueparts if they are marked onthe paper.

2

Note

Basic working method and markingsTo begin

How to assemble

Tools and materials needed

Items of Caution

-Ruler - scissors - blade cutter or "Exacto-knife" - awl orother pointed tool (for making a folding crease) - felt pen- pin set - glue - hand towel ( for cleaning your fingers) -dictionary or other heavy book ( to press the papers flat).

*Take care when using sharp or pointed objects or whenusing bladed cutting tools. Place a heavy sheet of paperunder the paper you want to cut.

*Use glue and other adhesives only in well-ventilatedareas.*When printing, use a slightly reduced font size. Theremay be differences in dimensions, depending on thetype of printer used.

*Follow the working method and markings carefully.

*Cut carefully along the outter line with cutting blade,Exacto-knife or scissors.

One - point Advice

*Before beginning assembly, test adhesive amountson extra paper.

*Cut carefully with cutting blade, Exacto-knife orscissors.

*Occasionally, white spots will be apparent on foldsand cuts. Use a marker or pencil to fill in these spots.It is recommended that this be done after each stageof assembly because coloring becomes more difficultonce parts are assembled.

*As an adhesive, white wood glue is recommended.Avoid over application as this may cause the paper towrinkle.

*For folding parts, first use an awl or other pointedtool to make a light crease along the dotted or solidline. This will make the folds straight. Avoid making

strong creases, as this will cause the paper to tear.

Cut along these lines.Dotted line

Fold along these lines.

The printed surface should beon the inside of the folded shape.

Broken lines

Fold along these lines.The printed surface should beon the outside of the folded shape.

Solid lines

Do not fold or cut the partsmarked .

Red dots are the referencepositions for gluing surfaces.

Cut out parts marked with anasterisk(*).

8/14/2019 Mt01 Assembly 02

3/10

8/14/2019 Mt01 Assembly 02

4/10

*Assemble both sides. The diagramshows the left side. The number inside

the ( ) is for the right side.

Glue in order from to on the graphic.

8/14/2019 Mt01 Assembly 02

5/10

8/14/2019 Mt01 Assembly 02

6/10

*Assemble both sides. The diagramshows the left side. The number inside

the ( ) is for the right side.

Glue in order from to on the graphic.

8/14/2019 Mt01 Assembly 02

7/10

Connect each of the previously assembled parts inorder from - according to the diagram.

Frame 4

Frame 4

Frame 7

Frame 5

Frame 6

Frame1 Frame 8

Frame 9

Frame 2

Frame 3

* At this point, do not paste frame 1 on C-1, C-2, C-34 and C-35.

8/14/2019 Mt01 Assembly 02

8/10

*Assemble both sides. The diagramshows the left side. The number inside the ( ) is for the right side.

Glue in order from to on the graphic.

8/14/2019 Mt01 Assembly 02

9/10

Glue in order from to on the graphic.

8/14/2019 Mt01 Assembly 02

10/10

Connect each of the previously assembled parts inorder from - according to the diagram.

Rear Arm 1

Rear Arm 3

Rear Arm 1

Rear Arm 2