mtech 2017 - fakultet strojarstva i brodogradnje · kekez krešimir, pažameta dražen, pavlek...

www.mtech.com.hr

INTERNATIONAL CONFERENCE ON MATERIALS

corrosion, heat treatment, testing and tribology, 2017

October 04-07, 2017, Zadar, Croatia ORGANISED BY

Croatian Society for Materials andTribology – HDMT

Croatian Center for Nondestructivetesting – CENI

Croatian Society for Heat Treatment and Sufrace Engineering – HDTOIP

Croatian Society for materials protection–HDZaMa

WITH THE SUPPORT OF PARTNERS

STUDENT SPONSORS

SPONSORED BY

MTECH 2017

www.mtech.com.hr



PROGRAM COMMITTEE:

Željko Alar (President), Vesna Alar, Franjo Cajner, Danko Ćorić, Gorazd Fajdiga

(UNI LJ), Imre Felde (UNI OBUDA), Hrvoje Ivanković (FKIT), Ivan Juraga, Ivica Kladarić

(SFSB), Darko Landek, Igor Majnarić (GRF), Damir Markučič, Božidar Matijević, Helena

Otmačić Ćurković (FKIT), Duško Pavletić (RITEH), Zdravko Schauperl, Božo Smoljan

(RITEH), Josip Stepanić, Ivan Stojanović, Vinko Šimunović, Johann Wilhelm Erning

(BAM), Angela Topić (FSR Mostar), Mato Pavlović (BAM Berlin).

ORGANIZING COMMITTEE:

Matija Sakoman (President), Tamara Aleksandrov Fabijanić, Antonio Ivanković, Dario

Iljkić, Suzana Jakovljević, Dragutin Juraj, Krešimir Kekez, Tomislav Kezele, Saša

Kovačić, Ivan Kumić, Marin Kurtela, Morana Mihaljević, Andrijana Milinović, Miroslav

Omelić, Tihomir Polanović, Marijana Serdar, Mateja Šnajdar Musa.

TECHNICAL COMMITTEE:

Ljiljana Pedišić (INA), Džo Mikulović (MESA Electronic GmbH), Roman Tomat (Schunk

Wien GmbH), Mladen Stupnišek (Feliks Metal), Zdravko Prošić (PRO-C.T.I.), Jerko Prlić

(Anton Paar Croatia), Marko Ebert (EBERT), Dario Karlovčan (Oprema pod tlakom

d.o.o.), Ante Dizdar (OPT d.o.o.), Marko Rakvin (TUV Croatia), Branko Šeparović

(Altmont), Zvonimir Ivković (ĐĐ TEP), Martin Miculinić (ZIT), Damir Pinotić (STSI),

Mladen Franjković (STSI), Karla Rončević (Helios), Ivana Radić Boršić (Cortec

Corporation Europe), Robert Iveković (IVEKOVIĆ-TZM).

TOPICS:

Materials and processes, Materials characterization, Nanomaterials and

nanotechnology, Metallurgy, Friction, wear and lubrication, Coatings, Advanced

surface modification and coating technologies, Vacuum heat treatment, Heat treating

equipment, Quenchants and quenching technology, Mathematical modelling and

process simulation of heat treatment, Corrosion, Corrosion protection methods,

Corrosion resistant materials, Non-destructive testing and evaluation, In-service

inspection, Certification and accreditation, Measurement and quality assurance.

Conference Chairman

Prof. dr. sc. Željko Alar

www.mtech.com.hr



VENUE AND DATE:

MTECH International Conference will be held at Hotel Kolovare in Zadar, from 4-7 October, 2017. HOTEL KOLOVARE is located near historical sights of the ancient city of Zadar. City of Zadar is know as cultural, economic and administrative center of Northern Dalmatia.

LOCATION OF CONFERENCE HOTEL:

Hotel KOLOVARE is located at Bože

Peričića 14, 23 000 Zadar, Croatia

HOW TO REACH THE CONFERENCE HOTEL:

BY PLANE: The Zadar airport - Zemunik (ZAD) is very well connected to bigger towns of Croatia

and Europe and it is situated only 20 minutes by car far from Zadar.

BY CAR: You can come to Zadar from several directions and the highway A1, route Zagreb -

Split, is the quickest and best of all. The best exit from the highway is at the knot Zadar east or

Zadar west. If you are coming from Rijeka, you can take the Adria road - route D8.

BY FERRY: If you are coming from the direction of Italy, the shortest possible route is through

Ancona by ferry to Zadar.

BY BUS: Zadar is the centre of north Dalmatia and very well connected with other Croatian and

bigger European towns.

CONFERENCE HALLS:

A total of 4 conferece halls will be used for the purpose of the conference:

KOLOVARE Hall – Opening ceremony, Invited lectures, Gala Dinner

Meeting room 1 - Lectures

Meeting room 2 – Poster session, Coffee breaks, Sponsor exibition

Meeting room 3 - Lectures

www.mtech.com.hr



DAY 0 – TUESDAY 3.10.2017.

20.00 h WELCOME RECEPTION for Workshop participants

By the pool area of Hotel Kolovare

DAY 1 – WEDNESDAY 4.10.2017.

10.00 h Workshops http://mtech.com.hr/workshops

Meeting room 1, 2, 3, KOLOVARE HALL

20.00 h WELCOME RECEPTION for Conference participants

By the pool area of Hotel Kolovare

DAY 2 – THURSDAY 5.10.2017.

8.30-9.00 h REGISTRATION DESK Hotel reception

9.00-9.20 h OPENING CEREMONY Kolovare HALL

9.20-10.30 h INVITED & COMMERCIAL LECTURES

Kolovare HALL

10.30-11.00 h COFFEE BREAK Meeting room 2

11.00-13.00 h LECTURES Meeting room 1 & 3

13.00-14.30 h LUNCH BREAK -


16.30-18.00 h POSTER SESSION, EXIBITION & COFFEE

Meeting room 2

19.00 h ZADAR CITY TOUR & WINERY ŠKAULJ

In front of Hotel Kolovare

DAY 3 – FRIDAY 6.10.2017.


Kolovare HALL





16.30-18.00 h POSTER SESSION, EXIBITION & COFFEE

Meeting room 2

20.00 h GALA DINNER Kolovare HALL

DAY 4 – SATURDAY 7.10.2017.

10.00h FULL DAY EXCURSION TO KORNATI NATIONAL PARK

In front of Hotel Kolovare

PROGRAMME OVERVIEW

http://mtech.com.hr/workshops

www.mtech.com.hr




TIME / EVENT / LOCATION

8.30-9.00 h REGISTRATION DESK Hotel reception

9.00-9.20 h OPENING CEREMONY Kolovare HALL


Kolovare HALL

INVITED LECTURE: Dr. rer. nat. Johann Wilhelm Erning

INVITED LECTURE: Dr. Imre Felde

COMMERCIAL LECTURE: Kontroltest International d.o.o.


11.00-13.00 h LECTURES Meeting room 1 & Meeting room 3

Meeting room 1

Smoljan, Božidar, Iljkić Dario, Smokvina Hanza Sunčana, Štic Lovro, Borić Andrej, Rubeša Domagoj: PREDICTION OF STEEL PROPERTIES DURING CONTROLLED COOLING OF STEEL HOT ROLLED BARS

Mandić Davor, Alar Željko: ANALYSIS OF COMPLIANCE FOR EVALUATION OF INSTRUMENTED IMPACT TEST DATA

Kladarić Ivica, Kladarić Slavica, Milinović Andrijana: NORMALIZACIJSKO ŽARENJE MARAGING ČELIKA

Matijević Božidar, Murilo Borges Masalskas, Lauralice de Campos Franceschini Canale: MECHANICAL PROPERTIES OF HOT WORK TOOL STEELS SUBMITTED TO HARDENING FROM DIFFERENT HEAT TREATMENT FURNACES

Jandrlić Ivan, Rešković Stoja, Lazić Ladislav, Alar Željko, Udiljak Toma, Brlić Tin: POSSIBILITY OF USING THERMOGRAPHY AND DIGITAL IMAGE CORRELATION FOR DETERMINATION OF STRESS AND STRAIN DISTRIBUTION IN DEFORMATION ZONE

Landek Darko, Alar Vesna, Kovačić Saša, Baršić Gorana: INFLUENCE OF SURFACE PREPARATION ON THE PROPERTIES OF A NITROCARBURIZED LAYER

Meeting room 3

Serdar Marijana, Bjegović Dubravka: PONAŠANJE BETONSKIH STUPOVA ARMIRANIH KOROZIJSKI OTPORNIM ČELIKOM U REALNOM MORSKOM OKOLIŠU

Šimunović Vinko, Juraga Ivan, Stojanović Ivan, Kurtela Marin, Klasnić Antonio: NAPETOSNA KOROZIJA NEHRĐAJUĆIH ČELIKA – ANALIZE SLUČAJEVA I MOGUĆNOSTI IZBJEGAVANJA

Rozing Goran, Alar Vesna, Heffer Goran, Vidaković Ivan: ISTRAŽIVANJE OTPORNOSTI MARTENZITNIH KOROZIJSKI POSTOJANIH ČELIKA U UVJETIMA KOMBINIRANOG TROŠENJA

Kekez Krešimir, Pažameta Dražen, Pavlek Mario: REHABILITACIJA SPREMNIKA TOPLINE „PAMETNOM“ KATODNOM ZAŠTITOM

Ivan Stojanović, Vesna Alar, Kurtela Marin, Ivanek Tomislav: UTJECAJ PARAMETARA ANODIZACIJE ALUMINIJA NA SVOJSTVA OKSIDNE PREVLAKE

Ivica Garašić, Zoran Kožuh, Ivan Jurić, Ivan Torer: PRIMJENA MAG CBT POSTUPKA ZA ADITIVNU PROIZVODNJU ELEKTRIČNIM LUKOM I ŽICOM

FULL PROGRAMME

www.mtech.com.hr







Meeting room 1

Fajdiga Gorazd, Kovačič Aljaž, Šubic Barbara: ANALYSIS OF WOODEN BASED HYBRID BEAMS

Starčević Valnea, Opačak Ivan, Putnik Ivan, Grgić Ivan, Marušić Vlatko, Pecić Vladimir, Marić Dejan: SPECIFICAL PROPERTIES OF 13CRMO4-5 BOILER STEELS

Grgic Ivan, Putnik Ivan, Opacak Ivan, Starcevic Valnea, Ivandic Zeljko, Samardzic Ivan: EXPERIMENTAL AND NUMERICAL MODELING OF TENSILE AND BEND TESTING OF 13CrMo4-5 BOILER STEEL

Grilec Krešimir, Žmak Irena: DREVNI ŽELJEZNI MATERIJALI

Sakoman Matija, Ćorić Danko, Aleksandrov Fabijanić Tamara: EFFECTS OF Co CONTENT ON THE WC GRAIN SIZE AND HARDNESS OF CEMENTED CARBIDE

Meeting room 3

Marić Vjera, Stupičić Robert, Stojanović Ivan: UTJECAJ PRIPREME OŠTROG RUBA U SKLADU SA ZAHTJEVOM IMO MSC.215 (82)

Hudec Bojan, Martinez Sanja: KARAKTERIZACIJA ELEKTROKEMIJSKOG SENZORA ZA NADZOR STANJA ZAŠTITNIH PREMAZA U ZONI ZAPLJUSKIVANJA OD OBALNIH OBJEKATA

Grudić Veselinka, Knežević Bojana, Martinez Sanja: PRIRODNI MED KAO KOROZIJSKI INHIBITOR ZA UGLJIČNI ČELIK U OTOPINI KLORIDA

Kristan Mioč Ekatarina, Katić Vedrana, Otmačić Ćurković Helena: KOROZIJSKA ZAŠTITA SAMOORGANIZIRAJUĆIM FILMOVIMA ORGANSKIH KISELINA

Leutar Ivan, Jakopčić Mirko: DUGOROČNA ZAŠTITA SLOŽENIH TEHNIČKIH SUSTAVA PRIMJENOM ISPARAVAJUĆIH INHIBITORA KOROZIJE

Bavarian Behzad, Reiner Lisa, Samimi Babak, Miksic Boris, Rogan Ivan: UTJECAJ VELIČINE PRAŠKA HLAPLJIVIH INHIBITORA KOROZIJE NA EFIKASNOST INHIBITORA

16.30-18.00h POSTER SESSION, EXIBITION & COFFEE

Meeting room 2

Macura Vladimir, Aleksandrov Fabijanić Tamara, Alar Željko: ODREĐIVANJE MODULA ELASTIČNOSTI ČELIKA

Pisk Matija, Aleksandrov Fabijanić Tamara, Sakoman Matija: MJERITELJSKE KARAKTERISTIKE REFERENTNIH PLOČICA TVRDOĆE PO VICKERSU

Kalanj-Matković Eugen, Aleksandrov Fabijanić Tamara , Sakoman Matija: INSTRUMENTIRANA METODA UTISKIVANJA NA NANOSTRUKTURIRANIM TVRDIM METALIMA

Petruša Jelena, Žmak Irena: POLYMER COMPOSITES IN RACING MOTORCYCLE BODYWORK

19.00 h ZADAR CITY TOUR & WINERY ŠKAULJ

in front of Hotel Kolovare

www.mtech.com.hr



DAY 3 – FRIDAY 6.10.2017.



Kolovare HALL

INVITED LECTURE: Dr. Ing. Mato Pavlović

INVITED LECTURE: Prof.dr.sc. Dragutin Lisjak

COMMERCIAL LECTURE: Anton Paar Croatia d.o.o.



Meeting room 1

Katić Marko, Šokac Mario, Budak Igor: PRIMJENA RAČUNALNE TOMOGRAFIJE KOD PROIZVODA OD RAZLIČITIH MATERIJALA

Sperling Philip: A NEW GENERATION OF X-RAY COMPUTED TOMOGRAPHY DEVICES FOR QUALITY ASSURANCE AND METROLOGY INSPECTION IN THE FIELD OF ADDITIVE MANUFACTURING AND OTHER SCIENCES Rakvin Marko, Perkušić Velimir, Markučič Damir, Kezele Tomislav: MJERENJE DEBLJINE STIJENKE CIJEVI MALOG PROMJERA

Mihaljević Morana, Markučič Damir: MJERENJE ULTRAZVUČNE BRZINE ETALONA V1 PREMA ZAHTJEVIMA NORME HRN EN ISO 2400

Omelić Miroslav, Korenjak Edgar: ISPITIVANJE ZAVARENIH SPOJEVA TERMOPLASTIČNIH MATERIJALA

Vukoja Matija, Markučič Damir, Mihaljević Morana: ANALYSIS OF THE STANDARD REQUIREMENTS FOR CHARACTERIZATION PROCEDURES FOR ULTRASONIC THICKNESS GAUGES

Meeting room 3

Topić Angela, Bauer B., Kožuh Z., Knezović N.: UTJECAJ ZAŠTITNOG PLINA NA KOROZIJSKU POSTOJANOST I GEOMETRIJU SPOJA KOD LASERSKOG ZAVARIVANJA DUPLEX ČELIKA

Obralić Ema, Ćatić Sead, Martinez Sanja: PRIMJENA ELEKTROHEMIJSKE IMPEDANCIJSKE SPREKTROSKOPIJE ZA OCJENU UČINKA POSTUPKA ČIŠĆENJA NEHRĐAJUĆEG ČELIKA

Strelar Ivan: ZAŠTITA IZMJENJIVAČA TOPLINE OD KOROZIJE

Majnarić Igor, Štukar Iva, Alar Vesna, Stojanović Ivan: MEHANIČKA POSTOJANOST CMYK UV INKJET PREMAZA IZVRŠENOG CROSS CUT METODOM UZ PRIMJENU SLIKOVNE ANALIZE

Stojanović Ivan, Juraj Dragutin: TOČNOST I POUZDANOST MJERENJA DEBLJINE ZAŠTITNIH PREMAZA NEDESTRUKTIVNIM METODAMA NA VRUĆE POCINČANIM ČELIČNIM PODLOGAMA

Primorac Ivan, Horvatić-Novak Amalija, Grilec Krešimir, Jakovljević Suzana: STRUCTURE ANALYSIS OF METAL FOAM USING CT DEVICE

www.mtech.com.hr



DAY 3 – FRIDAY 6.10.2017.




Meeting room 1

Ayday Aysun: WEAR BEHAVIOR OF MICRO ARC OXIDATION COATINGS ON BIOMEDICAL Ti6AL4V ALLOY

Bogdanić Dino, Horvat Tomislav, Jačan Jurica, Landek Darko: UTJECAJ POSTUPAKA PREVLAČENJA NA INTEGRITET POVRŠINE TI6AL4V LEGURE Smolčić Juraj, Stepić Antonio, Kumić Ivan: IMPLANT'S SURFACE MORPHOLOGY AND ROUGHNESS INFLUENCE ON BONDING WITH BONE CEMENT Šaka Marko, Kumić Ivan: RESEARCH AND DEVELOPMENT OF PLASMA NITRIDING AND PACVD TREATMENTS IN THE REPUBLIC OF CROATIA Radas Patrik, Lubina Josip, Kovačić Saša, Landek Darko: UTJECAJ ORIJENTACIJE POVRŠINE ALATNOG ČELIKA ZA TOPLI RAD NA DEBLJINU I PRIONJIVOST PREVLAKE PACVD TIN Meeting room 3

Surma Robert, Godec Damir, Pilipovic Ana: 3D PRINTED PARTS REINFORCED WITH FIBERGLASS

Bratošević Mladen, Sabbioncello Bartul, Rožić Matija, Varšić Nevenko: RAZVOJ I IZRADA GUMENIH ODBOJNIKA ZA PROJEKT VRATA VENECIJE Čujić Iva, Aleksandrov Fabijanić Tamara, Kovačić Saša: INSTRUMENTIRANA METODA UTISKIVANJA PACVD PREVUČENIH NANOSTRUKTURIRANIH TVRDIH METALA Ormuž Jan Karl, Radonić Luka, Šnajdar Musa Mateja: KONSOLIDACIJA ALUMINIJA IZ PRAHA POMOĆU BP -ECAP METODE Juroš Ljerka, Pustički Danijel, Šnajdar Musa Mateja: ANALIZA UTJECAJA ECAP POSTUPKA NA MIKROSTRUKTURU ALUMINIJA Kesner Martina, Sakoman Matija, Ćorić Danko: GUSTOĆA I POROZITET NANOSTRUKTURIRANIH TVRDIH METALA KONSOLIDIRANIH POSTUPKOM TEORETSKE GUSTOĆE 16.30-18.00h POSTER SESSION,

EXIBITION & COFFEE Meeting room 2

Sambolek Anamarija, Majić Renjo Marijana, Majer Ozren: SILICONE ADHESION ON THE PLASMA TREATED PIEZO CERAMICS

Bašić Bojan, Rede Vera, Majić Renjo Marijana: UTJECAJ OPTEREĆENJA NA TVRDOĆU NISKOLEGIRANOG ČELIKA 39NiCrMo3

Stojanović Ivan, Ante Milić: VODORAZRJEDIVI PREMAZI S INHIBITOROM KOROZIJE

Korenjak Edgar, Omelić Miroslav: ISPITIVANJE ODLJEVAKA ULTRAZVUČNOM METODOM

Žukina Mihaela, Mihaljević Morana, Horvatić Novak Amalija: ULTRAZVUČNO MJERENJE DEBLJINE ZRAKOPLOVNIH PROZORA

20.00 h GALA DINNER Kolovare HALL

www.mtech.com.hr



Dr. rer. nat. Johann Wilhelm Erning

Works at Bundesanstalt für Materialforschung und –prüfung (BAM), Berlin, Germany. Studied Chemistry in Cologne and Bonn. Worked for the research centre Jülich from 1993 – 1996. Worked as post-doc at South Westphalia University of Applied Sciences from 1996-1998. Currently working at Bundesanstalt für Materialforschung und –prüfung (BAM) since 1998. Topics: electrochemistry, metals in contact with drinking water, failure analysis. Participation in various committees at EFC, CEN, DIN, DVGW…

Prof.dr.sc. Dragutin Lisjak

Professor Dragutin Lisjak received his doctorate at the Faculty of Mechanical Engineering and Naval Architecture In Zagreb at the Department of Materials with the topic "Application of Artificial Intelligence Method in materials selection". For many years he has been dealing with materials selection problems and Material databases. He was a leader and participant in several scientific Projects related to the mentioned issue. Current areas of his interest are machine learning methods, evolutionary algorithms, multi-criteria decision-making and optimization business processes.

Dr. Imre Felde

Dr. Imre Felde was born 19.07.1973. in Hungary. He achieved his PhD in Materials Science and Technology from Miskolc University (Hungary) in 2007. From 1995. to 2008. he was head of department and from 2008 to 2012. CEO of Bay Zoltán Foundation for Applied Research, Budapest, Hungary. From 2012. he is Vice Dean of Faculty of Informatics , Obuda Univesity in Budapest, hungary. He has published more than 100 scientific and technical papers in field of engineering, computer science, mathemathics and process modeling. He is member of editorial board of Strojniski Vestnik-Journal of Mechanical Engineering, International Journal of Microstructure and Mechanical Properties, Surface Engineering and Hindawi Advanced Materials Science and Technology.

Dr. Ing. Mato Pavlović

Born in 1971, is a researcher with over 10 years of experience in the field of non-destructive testing, especially ultrasonic testing (UT), working at the BAM in Berlin, Germany. His current research interests include the theoretical modeling and simulation, and reliability analysis of UT systems. His work concentrates on the investigation of UT systems for the automated inspection of high-speed train axles. Furthermore, he looks into the advanced phased-array UT system used for the inspection of canisters for the permanent storage of spent nuclear fuel. He also worked for German Society for Non-destructive Testing (DGZfP) - Education and Training Ltd. as an NDT reliability advisor, developing guidelines for the reliability evaluation of NDT systems. Prior to joining BAM, he worked as a research and development engineer at Soko Z.I. developing a flight simulator. Mato Pavlovic has a degree (Dipl.-Ing) in Mechanical Engineering from the University of Zagreb, Croatia and a postgraduate degree (Dr.-Ing.) in Material Science from the University of Saarland, Germany.

INVITED LECTURERS

www.mtech.com.hr



www.mtech.com.hr/workshops

WORKSHOP 1

APPLICATION OF CORROSION INHIBITORS FOR PROTECTION OF STRUCTURES AND FACILITIES IN

MARINE ENVIRONMENT

WORKSHOP 2

REQUIREMENTS FOR QUALITY ASSURANCE OF NDT TESTING RESULTS

WORKSHOP 3

SPECIFICITIES OF HEAT TREATMENT AND APPLICATION OF SURFACE ENGINEERING IN TOOL MAKING

WORKSHOP 4

ADVANCES IN THE FIELD OF MECHANICAL PROPERTIES TESTINGS, AND CALIBRATION OF THE

TESTING EQUIPMENT

WORKSHOP 5

METALLOGRAPHIC TECHNIQUES IN APPLICATION

WORKSHOPS

http://www.mtech.com.hr/workshops

www.mtech.com.hr



OFFICIAL LANGUAGES:

Official languages of the Conference are Croatian and English.

CONFERENCE BADGE:

Everyone is kindly requested to wear her/his name badge during the Conference as it

provides access to the scientific sessions, poster session, lunches, coffee breaks and

conference gala dinner.

LUNCHES AND COFFEE BREAKS:

Lunches will be served during the conference days at the hotel restaurant. Coffee breaks

will be served at the conference Meeting room II according to the program timetable.

TECHNICIANS SERVICE:

All speakers should check and upload their presentations at the Registration desk (in the

lobby of Kolovare Hotel) at the latest in the breaks just before the relevant session.

Technical support will be at your service during the opening hours of the Registration

desk.

DURATION OF PRESENTATION:

Due to the tight presentation schedule each participant selected for presentation is kindly

asked to present his work in 12 min. Additional 3 min is left for the discussion of each

presentation. All speakers are kindly asked to prepare the presentation in English in a

Power Point format and to save it on a USB memory device.

POSTER PRESENTATION:

Posters will be exhibited in the conference Meeting room II.

All authors participating at MTECH 2017 with posters have to print posters and bring

them to the conference. The Conference Secretariat will provide pins, glue tape and

assistance for posters set-up. Poster size should be 70 cm x 100 cm (that is width x height;

portrait format). Organizing Committee is unfortunately not able to offer a Poster Printing

Service.

REGISTRATION:

All participants at MTECH 2017 have to register via http://mtech.com.hr/registration.

1st August 2017 - preliminary program and early registration discount payment -10%

http://mtech.com.hr/registration

www.mtech.com.hr



ZADAR CITY TOUR & WINERY ŠKAULJ:

Date and time: Thursday, 05th October, 19.00

For those eager to discover beauties of Zadar, a City Tour will be organized starting from Hotel

Kolovare. After the Tour a transfer via Coaches is planed to Winery Škaulj, where the traditional dinner

and tasting of rewarded wines will be held.

EXCURSION TO KORNATI NATIONAL PARK:

Date and time: Saturday, 07th October, 10.00

To make your stay in Zadar pleasant, we have planned an additional social event. Please consider

joining us during the full day excursion, which will start from the hotel reception, on Kornati National

Park. These islands are the most indented group of islands in the European Mediterranean of the most

exceptional landscape value which was given the status of a national park in 1980. More than three

quarters of the Park’s surface belong to the sea, whereas the land part consists of 89 islands, islets and

reefs in the total surface of 50 km2.

CONFERENCE WELCOME DRINK:

Date and time: Wednesday, 04th October, 20:00

Venue: Hotel Kolovare, Zadar, terrace

The Organizers invite all guests to enjoy a breathtaking panorama, together with the appropriate

welcome drink and snack in the pool area of the Hotel Kolovare.

Dress code: Casual

CONFERENCE GALA DINNER:

Date and time: Friday, 06th October, 20:00

Venue: Hotel Kolovare, Zadar

The Organizers welcome all participants to spend a charming evening on the terrace and in the

Kolovare Hall. The unique location, excellent cuisine, professional service and special care for details,

make the hotel Kolovare an ideal place for the conference banquet. Discover the romantic ambience

with the sounds of the traditional music and variety of uniques flavors which charm even the most

discerning guests!

Dress code: Formal

mtech 2017 - fakultet strojarstva i brodogradnje · kekez krešimir, pažameta dražen, pavlek...

Documents