mtx_aqp - carga de lip file en bts_bssm aqp_aqp
TRANSCRIPT
-
7/29/2019 Mtx_aqp - Carga de Lip File en Bts_bssm Aqp_aqp
1/5
GCGR Form: GCGR-005
MOP DE INGENIERIA Y OPERACIONES
1. Procedimiento.a. Informar a NOC inicio de labores.b. En caso de presentarse problemas en la aplicacin del LIP file, el NOC BSP deber ponerse en
contacto con el soporte local de NORTEL en Lima : Luis Felipe Giraldo (95127856) y de afectar elservicio contactarse con el Call Center de Nortel y facilitarles los debidos accesos a nuestros sistemas.c. Realizar el siguiente procedimiento (Deployment Instructions).
Patch Name: cmbiap110djp3.lip
Patch Load: cmbiap110djp3.lip
Patch Prime: Sunitha Kaushik
Category: GEN
SPAPP: N
SUNW_PATCHID: N/A
SUNW_REQUIRES: N/A
SUNW_INCOMPAT: N/A
SUNW_OBSOLETES: N/A
CR_NUMBER: Q00971293-01CASE_NUMBER: 040822-64142BPRF Number: N/A
VO Site: DLTHGAGQ02W
VO Prime: Andrew McQuerry
Deployment Instructions :
1. Transferir en modo binario el paquete del patch "cmbiap110djp3.tgz" al directorio /opt/bsm/lib/lip/V11.0.patch del
BSM activo (normalmente es el BSM A)
2. Logearse al BBSM Activo con el usuario bsmbin.
3. Tomar un snapshot de la base de datos con el procedimiento conocido y utilizado en el SWACT de BSMs
4. Ejecutar la herramienta SSPRSM
are1bsm0a% cd /opt/bsm/bin
are1bsm0a% pwd
/opt/bsm/bin
are1bsm0a% ssprsm -lipdir=V11.0
Welcome to SSPRSM
(SubSystem Post Release Software Manager)
Version: 11.1.02
Type help for usage information.
Type quit to exit the application.
log file: /opt/bsm/log/ssprsm/ssprsm.2739.log
Initializing... Please wait.
Found [/opt/bsm/lib/lip/V11.0.patch/ cmbiap110djp3.tgz]. Unpacking...
admin. cmbiap110djp3
cmbiap110djp3.lip
Getting a list of relavent MOs
Primary MOs: 30Getting LIP Information from database. This will take a few minutes.
Querying BSSM for [mini]
Esta es una informacin confidencial de Propiedad de BellSouth Per. Pgina 1 de 5El acceso o reproduccin no autorizada est estrictamente prohibido.
-
7/29/2019 Mtx_aqp - Carga de Lip File en Bts_bssm Aqp_aqp
2/5
GCGR Form: GCGR-005
Querying BSSM for [macro]
Querying BSSM for [mc] ........................
Querying BSSM for [lsbs]
Querying BSSM for [esbs] ..
Querying BSSM for [fwsbs]
Querying BSSM for [cn]Querying BSSM for [tfu] ..
Querying BSSM for [disco] ..
SSPRSM> apply mc
Running apply precheck ...
1590 WARNING: Found LFP [ecc222aa] which is invalid for BSSM version 110. You will not be able to se
lect [ecc222aa] for applying.
1590 WARNING: Found LFP [gps182aa] which is invalid for BSSM version 110. You will not be able to se
lect [gps182aa] for applying.
1590 WARNING: Found LFP [gps188aa] which is invalid for BSSM version 110. You will not be able to se
lect [gps188aa] for applying.
1590 WARNING: Found LFP [gps190aa] which is invalid for BSSM version 110. You will not be able to se
lect [gps190aa] for applying.
1590 WARNING: Found LFP [gps256aa] which is invalid for BSSM version 110. You will not be able to se
lect [gps256aa] for applying.
1590 WARNING: Found LFP [gps260aa] which is invalid for BSSM version 110. You will not be able to se
lect [gps260aa] for applying.1590 WARNING: Found LFP [gps330ab] which is invalid for BSSM version 110. You will not be able to se
lect [gps330ab] for applying.
1590 WARNING: Found LFP [gps356ab] which is invalid for BSSM version 110. You will not be able to se
lect [gps356ab] for applying.
1590 WARNING: Found LFP [gps360ab] which is invalid for BSSM version 110. You will not be able to se
lect [gps360ab] for applying.
INDEX PATCH LIP INTERNAL NAME
0 cemap110dep1 cemap110dep1
1 cemap110dep2 cemap110dep2
2 cembl110dc cembl110dc
3 cmbcap110dip2 cmbcap110dip2
4 cmbcap110dip5 cmbcap110dip55 cmbcbl110dg cmbcbl110dg
6 cmbcbl110dgp1 cmbcbl110dgp1
7 cmbiap110dj cmbiap110dj
8 cmbiap110djp3 cmbiap110djp3
9 coreap110bj coreap110bj
10 corebl110bj coreais110bj
11 mfrm2app110nonex mfrm2app110nonex
12 mfrm2app110xbp3 mfrm2app110xbp3
13 mfrm2app110xbp4 mfrm2app110xbp4
14 mfrm2bl110nonex mfrm2bl110nonex
15 mfrm2bl110xbp3 mfrm2bl110xbp3
16 mfrmap110dhp2 mfrmap110dhp2
17 mfrmap110dhp4 mfrmap110dhp4
18 mfrmbl110de mfrmbl110de
19 rfmap110dhp1 rfmap110dhp1
20 rfmap110dhp3 rfmap110dhp3
21 rfmbl110bj rfmbl110bj
22 xcemap110djp3 xcemap110djp3
23 xcemap110djp5 xcemap110djp5
24 xcembl110bo xcembl110bo
Note: You may type abort if you wish to abort apply.
Which LIP(s) would you like to apply?
Enter the index that corresponds to the LIP you wish
to apply. If you wish to apply more than one LIP, simplyenter a comma separated list (example: 0,3,5)
SSPRSM:APPLY:INPUT?> 8
Esta es una informacin confidencial de Propiedad de BellSouth Per. Pgina 2 de 5El acceso o reproduccin no autorizada est estrictamente prohibido.
-
7/29/2019 Mtx_aqp - Carga de Lip File en Bts_bssm Aqp_aqp
3/5
GCGR Form: GCGR-005
cmbiap110djp3
Are these the patches you wish to apply? Please confirm.
SSPRSM:APPLY:CONFIRMATION(y/n/abort)?>y
Updating status to NU for mc ...
Running apply precheck ...
Processing cmbiap110djp3.lip ...
Updating SIL ...
Updating SIL ...Updating BSMCI default rows ...
UPGRADE LINEUP
cmbiap110djp3.lip
Launching /opt/bsm/scripts/V11.0_upgrade/ssupgradegui -bts &
Don't forget to:
a) take a snapshot of BSSM database, and
b) issue the refresh command,
after initialization is complete!!!
5. En la ventana BSMCONTROL, en la pestaa Software Librery, registrar el nuevo lip presionando el botn
REGISTER LIP IMAGE. Aparecer un cuadro de dilogo en el que se buscar el archivo cmbiap110djp3.lip en la
ruta/opt/bsm/scripts/V11.0_patch. Presionar aceptar y otro cuadro de dilogo aparecer para proceder a la
sincronizacin del lip file. Presionar sync y luego close.
Usando grficos:
6. En la ventana NAVIGATOR, expandir la estructura de la celda escogida hasta llegar al objeto CBCM. Hacer un
clic derecho sobre este objeto y seleccionar Edit and Update Attributes.
7. Cambiar el campo BTSIDnldApplicationID al LIP file cmbiap110djp3 registrado anteriormente en el SIL (Software
Inventory Library). Presionar update y luego close.
8. Volver a hacer un clic derecho sobre el objeto CBCM y seleccionar General Operations>InSvcDnld. La accin toma
unos 5 minutos en realizarse. Se puede revisar el proceso consultando la ventana de informacin. Al finalizar, hacer
un clic derecho y seleccionar Edit and Update Attributes para revisar que el campo BTSIFlashApplicationId
muestre la versin del lip cmbiap110djp3 en la flash 1, y el antiguo, el cmbiap110dj en la flash 0.
9. Hacer un clic derecho sobre CBCM y seleccionar Edit and Update Attributes. Cambiar el campo
BTSIResetApplication al nuevo lip. En el objeto MCBTSSubsystem1 hacer un clic derecho y ejecutar General
Operations>Reset para resetear la celda y hacer el activo el nuevo software.
10. Luego ejecutar General Operations>Initialize. Terminada la reinicializacin, revisar en el objeto CBCM que el
campo BTSIActualSoftwareId muestre la versin del lip cmbiap110djp3 como la actual versin activa en la celda.
11. Realizar pruebas de escenarios en cobertura de la celda.
Usando el CLIAPP.
6. Usar un sessin de terminal y ejecutar el comando cliapp. Posicionarse en la celda escogida y verificar que las dos
flash tengan la misma versin de lip:
46>cd O%:CBS1:Cells1:MC800_1002_DOLORES:mCBTSSubsystem1:root1:dCG1:cbCM1;
47>ls -f (BTSIFlashApplicationId);
# (
# BTSIFlashApplicationId =
# (
# 2,
# 0 =
# (
# SoftwareType = MCBTS_BTSI,# Version = "cmbiap110dj ",
# FileId = 0
Esta es una informacin confidencial de Propiedad de BellSouth Per. Pgina 3 de 5El acceso o reproduccin no autorizada est estrictamente prohibido.
-
7/29/2019 Mtx_aqp - Carga de Lip File en Bts_bssm Aqp_aqp
4/5
GCGR Form: GCGR-005
# ),
# 1 =
# (
# SoftwareType = MCBTS_BTSI,
# Version = " cmbiap110dj ",
# FileId = 0
# )
# )
# );
Si no tuvieran la misma versin, realizar un commit:
47>action Commit;
7. Cambiar el campo BTSIDnldApplicationID al LIP file cmbiap110djp3 registrado anteriormente en el SIL (Software
Inventory Library). Anotar el nmero del FileId para usarlo en el comando siguiente:
48>edit (BTSIDnldApplicationId =(Version = "cmbiap110djp3",FileId = 275)) ;
8. Realizar el InSvcDnld. La accin toma unos 5 minutos en realizarse.
49>action InSvcDnld;
Se puede revisar el proceso ejecutando el siguiente comando hasta que el campo BTSIFlashApplicationId muestre la
versin del lip cmbiap110djp3 en la flash 1, y el antiguo, el cmbiap110dj en la flash 0.
50>ls -f (BTSIFlashApplicationId);
9. Cambiar el campo BTSIResetApplication al nuevo lip. En el objeto MCBTSSubsystem1 ejecutar Reset e Initialize
para resetear la celda y hacer el activo el nuevo software.
51>edit (BTSIResetApplicationId =(Version = "cmbiap110djp3",FileId = 275)) ;
52>cd O%:CBS1:Cells1:MC800_1002_DOLORES:mCBTSSubsystem1;
53>action SubsystemReset;54>action BSMAgentReset;
55>action Initialize;
10. Utilizar el siguiente comando para notar el fin de la inicializacin (Status = AppRunning) . Terminada la
reinicializacin, revisar en el objeto CBCM que el campo BTSIActualSoftwareId muestre la versin del lip
cmbiap110djp3 como la actual versin activa en la celda.
56>action SubsystemStatus;
# (
# DownloadStatus = AppRunning,
# ComponentStatus =
# (
# Status = AppRunning,
# Hardware = BTSI
# ),
# FailDescription = "Control Module is running its application."
# );
57>cd O%:CBS1:Cells1:MC800_1002_DOLORES:mCBTSSubsystem1:root1:dCG1:cbCM1;
58>ls -f (BTSIFlashApplicationId);
# (
# BTSIActualSoftwareId =
# (
# SoftwareType = MCBTS_BTSI,
# Version = "cmbiap110djp3 ",# FileId = 0
# )
Esta es una informacin confidencial de Propiedad de BellSouth Per. Pgina 4 de 5El acceso o reproduccin no autorizada est estrictamente prohibido.
-
7/29/2019 Mtx_aqp - Carga de Lip File en Bts_bssm Aqp_aqp
5/5
GCGR Form: GCGR-005
# );
11. Realizar pruebas de escenarios en cobertura de la celda.
d. Notificar a NOC el fin de actividades.
2. Plan de Pruebas.Realizar llamadas bsicas en la cobertura de las BTS de ROPA SUR.
3. Notificacin de Cambios.
-----Mensaje original-----De: Rafael-Antonio Sanabria Martinez [mailto:[email protected]]Enviado el: Martes, 05 de Octubre de 2004 06:04 p.m.Para: BSP, Juan Barbadillo; '[email protected]'; '[email protected]'CC:
'Rossi, Elias'; '[email protected]'; '[email protected]'; Juan Sarmiento Vidal; Andres-Felipe Giraldo;Zerpa, RonieAsunto: RE: BSP: NBSS.11.0.1 Patch to Prevent Message Storm OutagesCaballeros
Por favor tener en cuenta que se debe programar una ventana para aplicar este lip file en las BTS de la red. Esta esuna labor de mantenimiento preventivo equivalente al proceso que normalmente se raliza en la central con laactualizacin de patches. Su aplicacin es muy importante para prevenir degradacin de servicio.
En el archivo que envi Juan Sarmiento hay un archivo llamadoadmin.cmbiap110djp3 que contiene una seccin alfinal titulada "deployment instructions".
An externally triggered broadcast paging message storm (data storm/data spam) has occurred in some
Customer systems resulting in extended outages/degradations. The BTS PCM Controller (BTSI)
congestion control feature engages protecting the BTS from excessive broadcast page message inflow
rates. This message storm could be a very high spike of messages for a very short duration. Once the
message storm has stopped the system was not recovering the office in a timely and acceptable manner.
It appears that the BTSI is stuck in overload discarding paging messages. Then, manual action is required
by ER to expedite the recovery to reduce the outage/degradation impact. The source of broadcast paging
has been traced to a single IP user from the Pacific rim.
Adjunto el lip file para que revisen y confirmen la necesidad de su aplicacin inmediata (en ventana de
mantenimiento pues afecta servicio).
>
Dejennos saber en caso tengan alguna duda y/o inquietud respecto al patch.
Gracias.
Saludos cordiales,
Juan SarmientoProject Manager - Nortel Networks Per S.A.C.Phone: (511) 411-2273 esn 695Email : [email protected]
Esta es una informacin confidencial de Propiedad de BellSouth Per. Pgina 5 de 5El acceso o reproduccin no autorizada est estrictamente prohibido.