muki lhp - gladiator equipment · 2016. 7. 7. · muki lhp production long hole rig for narrow...
TRANSCRIPT
www.resemin.com
MUKI LHPProduction long hole rig for narrow veins
MUKI LHP is an electro-hydraulic rig for long hole drilling, it has tilt, rotation and pendulum arm, perform precise and smooth movements for parallel holding.
Long hole drilling feed 2500 series with 2 Stingers and hydraulic clamp. Equipped with Montabert drifter HC 50 (13 kW).
Full 360°, horizontal coverage with parallel holding is 1.44 m; maximum length of drilling up to 15 m, diameters up to 74 mm bit, Reamer 127 mm.Chassis for heavy duty application, articulated 4WD, self-propelled with diesel, electro hydraulic system for drilling.
Applications:
• Sub Level Caving, benching• Sub Level Stoping• VCR and cable bolting
www.resemin.com
Muki LHP Technical specifications
SPECIFICATIONS
DRIFTER• Model• Percussion Power• Percussion pressure• Frequency Percussion• Rotation speed• Rotation Torque• Hole diameter• Lub air consumption• Lub oil consumption• Water consumption• Shank Adapter• Weight• Length with shank
Montabert HC5013 kW
130 Bar62 Hz
0 - 195 rpm415 Nm
33 - 64 mm83.3 l/s (to 2.5 bar)
0.8 cc/min25 l/min (to 8 bar)
R32 Female102 kg
855 mm
FEED• Model• Advance drilling• Feed extension• Hydraulic clamp• Standard Feed• Options• Two Stinger to stabilize while
drilling• Digital inclinometer for measuring
angles
CARRIER• Model• Diesel Engine• Power• Exhaust catalyst• Transmission• Hydrostactic pump• Positioning pump• Rear axle Oscillating• Service brakes• Emergency and parking brakes
• Tyres• Steering (articulated carrier)• Hydraulic jacks • Battery• Electric system• Gradeability • Canopy• Tramming lights
• Centralized Lubrication System• Drilling Lubrication System• Automatic fire suppression
system• Fire extinguisher• High-pressure washing system• Reel grease gun
C22.1
Deutz BF4L201155,1 kW @ 2300 rpm
StandardHydrostatic
Poclain, MSE 08Rexroth
± 8°Separate
SAHR (Spring Applied Hydraulic Release)
7.50 x R15±38°
2 extendable front2x12 V, 90 Ah
24 VDC15%
FOPS / ROPS8X, LED N44, 50W,
6700 lm, 24 VSKFSKF
ANSUL, 6 nozzles 1x5 lb, Type ABC
RE 2500 Series
Hydraulic motor and chain400 mmBull 1214 ft rods
3, 5 ft rods
Transtronic
www.resemin.com
Muki LHP Technical specifications
PENDULUM ARM• Angle tilt• Swing angle• Rotation angle• Hydraulic cylinders
+65°/ -20°± 30°360°
Parker
HYDRAULIC CONTROL SYSTEM• Direct Control Valve• Percussion pump (compensated
pressure)• Rotation Pump • Work pressure• Hydraulic oil tank• Hydraulic return filter• Hydraulic high filter • Saturation hydraulic filter
indicator • Indicator of low oil• Indicator temperature oil
WATER AND AIR SYSTEM• Compressor• Maximum capacity• Work pressure• Water pump with hydraulic
motor• Maximum flow at 8 Bar• Minimum inlet pressure• Cooler Thermal Transfer
AC - LE3 3-10 UV5.1 l/s (10.8 cfm)
3 Bar
Grundfoss, CR5 - 96.9 m3/h
2 BarEK 1018T, 80 GPM, 34 Bar
Parker K18
Rexroth A10V071Parker, P315 A
180 bar130 l
Parker, 10µParker, 20µ
ParkerHydacHydac
ELECTRIC SYSTEM• Electric motor• Voltage• Frecuency• Starting method• Option to 1000 VAC• Overload protection and
ground fault• Percussion hour meter• Phase sequence indicator• Battery charger• Electric transformer• Work Lights• Electric wire reel• Electric wire• Protection degree
ABB - 55kW (75 HP)
380 - 440 - 550 - 690 -1000 VAC50 - 60 Hz
Star - DeltaDirect start
Schneider, Module VIGIIn the control panel
Siemens32 VAC, 300W, 13A
1.5 kVA2X, LED N44, 50W, 6700 lm, 24 V
60 mGGC - 3X2 - AWG (35 mm)
IP 55
www.resemin.com
Muki LHP Technical specifications
DIMENSIONS
Rev
. 160
606
©
Cop
yrig
ht 2
016
RE
SE
MIN
. Spe
cific
atio
ns a
nd e
quip
men
t are
sub
ject
to c
hang
e w
ithou
t fur
ther
not
ice.
Total Weight 6,790 Kg.
COVERAGE AREA TURN RADIO