Multi-Functional Materials

and Structures II

Selected, peer reviewed papers from the

2nd International Conference on

Multi-functional Materials and Structures,

October 9-12, 2009, Qingdao, Shandong, P. R. China

PART 2

Edited by

Yansheng Yin and Xin Wang

1%) TRANS TECH PUBLICATIONS LTD

Switzerland • UK • USA

PART 2

V. Computer Modeling and Analysis

Numerical Study on Rapid Solidification of a Plasma-Sprayed Cast Iron Splat on a

High-Temperature Substrate

Y.Z. Xing, Q.L. Wei, J.M. Hao and C. Shang 1129

Structural Design and Performance Testing of Flexible Fabric Keyboard Switch

M.L. Zhang and R. Wang 1133

Notched Tensile Fracture of Ti-6Al-6V-2Sn Welds at Elevated TemperatureL.W. Tsay and C.L. Hsu 1137

Calculation of Flexural Capacity of Steel Reinforced Concrete Beams Strengthenedwith FRP

J.F. Liang, Z.P. Yang and L.L. Yan 1141

Research on Chaotic Behavior of Concrete under External Load Based on Discontinuous

Medium Mechanical Model

H. Qin and S.C. Li 1145

Ixii Multi-Functional Materials and Structures II

Coupled Numerical Analysis of the Anti-Crack Mechanism for Open-Graded Large Stone

Asphalt Mixes

H.B. Guoand S.F. Chen 1149

Finite Element Method Simulation of 35# Steel Cathodic Protection Models in the Seawater

H.Y. Sim, W. Wang and L.J. Sun 11S3

The Effect of Creep on Morphology Change of Surface Groove on Fecralloy in TBCs

during Thermal Oxidation CyclesX. Huang, J. Ding and K.J. Kang 1157

Numerical Investigation on the Effect of Copper Filler Thickness on the Brazed

Residual Stress

Q.Y.Xieand X. Ling 1161

Mathematical Modeling of the Fracture Toughness of Phenol Formaldehyde CompositesReinforced with E-Spheres

H. Ku, W. Xiang and N. Pattarachaiyakoop 1165

Numerical Simulation of Thermal Cycle of In-Service Welding on X70 Steel Gas PipelineY.H. Chen, Y. Wang and Z.F. Wang 1169

A Study on Process-Induced Warpage of Curing Mold of Composite Structures

G.Q. Yue, B.M. Zhang, S.Y. Du, F.H. Dai, C. Zhang, X.Z. Liang and Y.G. Wang 1173

Calculation and Analysis ofValence Electron Structures of the Precipitated Phases in

Al-Cu AlloyW.D. Liu and H. Qu 1177

Identification of Delamination in Anisotropic Laminated Plate

C. Du, Q.Q. Ni and T. Natsuki 1181

Atomic Simulation of the Bending Deformation of a Single-Crystal Simply

Supported Nano-Beam

W.B. Ni, J.W. Zhao, Y.H. Liu, F.Y. Wang and X. Yin 1185

Three-Dimensional Numerical Simulation of Residual Stresses by Shot-PeeningH.W. Zhang, Y.D. Zhang and Q. Wu 1189

Quantum Chemical Calculation of Maleic Anhydride Ring-Opening Reaction

M. Zhang, Z.X. Huang and Y. Qin 1193

Theory Study of the Geometrical Isomerism Influence on Hole-Transport Material's

Residual Potential of Organic Photoconductive

Y. Jing, S.R. Wang andX.G. Li 1197

First-Principles Calculations on the Geometry and Electronic Structure of Rutile

Ti02 (110) Surface

H.B. Su, P. Yang, J.B. Wang and N. Huang 1201

Dynamic Models for Magnetorheological Dampers and its Feedback Linearization

C. Zhang and L.X. Wang 1205

Simulation on Uniaxial-Tension Behavior of NiTi Shape Memory Alloy Films

S.S. SunandJ. Dong 1209

Experiment Research on Purifying Metallurgical Grade Silicon and Crystal Growth in

Directional Solidification

X.Y. Mei, W.H. Ma, K.X. Wei and Y.N. Dai 1213

Polyethylene Rubber Composite Target Resistance to Jet Penetration

X.D. Zu, Z.X. Huang, Q.Q. Xiao and M. Xia 1217

A Study on the Advanced Surface Characteristic of Yttria (Y203) Ceramic by UsingOptimal Design of Process

J.W. Chaand E.S.Lee 1221

The Gradual Damage Analysis for the Two-Dimension Unit Cell of the CompositeJ. Yu, R.R. Shi and Y.Z. Liu 1225

Advanced Materials Research Vols. 79-82 Ixiii

Process Analysis and Numerical Simulation of Equal Channel AngularPressing and Torsion (ECAPT)

Y.Z. Li, K.M. Xue and P. Li 1229

Studies on Magnetic Shielding Effectiveness by Finite Element Method

G.H. Wu, X.L. Huang, M.Q. Duan, Q. Zhang and X. Chen 1233

Experimental Researches on the Mechanical Properties of Three Dimensional

Multidirectional Braided CompositesY. Sun, J.L. Li, L. Chen and Y. Shao 1237

Buckling Response of Metallic Foam Composite Sandwich Panels Subjected to

Edgewise CompressionX.Z. Wang, L.Z. Wu and S.X. Wang 1241

Electronic Structure and Optical Properties of Non-Metals (N, F, P, CI, S)-Doped Cubic

NaTa03 by Density Functional TheoryP.L. Han, X.J. Wang, Y.H. Zhao and C.H. Tang 1245

First-Principles Study ofthe Electronic Structure and SpontaneousPolarization of PbZro.4Tio.6O3

Q.X. Zhao, B. Ceng, L. Guan, Q. Li, J.K. Ma, D.Y. Wei, J.X. Guo and B.T. Liu 1249

First-Principles Study on the Conductive Properties ofP-Doped ZnOL. Guan, Q. Li, X. Li, J.X. Guo, B. Geng, L.T. Jin, Q.X. Zhao, J.W. Zhao and B.T. Liu 1253

Atomic and Electronic Structure of LaAI03 and LaAIOvMg from

First-Principles Calculations

L. Guan, L.T. Jin, W. Zhang, Q. Li, J.X. Guo, B. Geng, Q.X. Zhao and B.T. Liu 1257

Kinetics of Sol-Gel Transformation for the Preparation of'Ti02 Ultrafiltration Membrane

X.P. Cao, W. Huang, W.H. Jing and W.H. Xing 1261

Experimental and Numerical Study ofthe Influence of a Low-Frequency ElectromagneticField on the As-Cast Structure of Horizontal Direct Chill Casting Aluminum Alloy Slab

Z.H. Zhao, J.Z. Cui, Q.F. Zhu and G.S. Wang 1265

3D Fem Study of Fluid Flow in the Mould for Billet Continuous CastingW. Chen, B.X. Wang, Y.Z. Zhang, J.H. Ma and S.J. Yuan 1269

Modeling and Testing for Small-Scale Time Delay Device Based on

Magnctorheological Fluid

L. Sui, G.C. Shi, K. An and B.J. Wei 1273

Effects ofMaterials on Formation of Double-Layered Liners Shaped ChargesY. Zheng, X.M. Wang, W.B. Li and W.J. Yao 1277

Synthesis and Formation Mechanism of Hollow Carbon Spheres ContainingFe3N Nanocrystals

B.Y. Liu, D.C. Jia, L.H. Dong and Y.S. Yin 1281

Numerical Simulation on Characteristics ofDense-Phase Pneumatic Conveying in

Horizontal PipeZ.M. Liu, H. Yi, W.L. Zhao and X.S. Li 1285

Molecular Simulation of the Interfacial Properties of an Epoxy Composite Reinforced Usinga Carbon Nanotube/Carbon Fiber Hybrid

F.H. Zhang, X.D. He, L.H. Dong and Y.S. Yin 1289

A Study on the Crack-Controlled Layer ofTJHTCC in Functionally-GradedComposite Beams

Q.H. Li andS.L. Xu 1293

Numerical Study on the Mechanical Behavior of Aluminum Foam Material

Using CT ImageH. J. Chung, K.Y. Rliee, B.S. Han and Y.M. Ryu 1297

Ixiv Multi-Functional Materials and Structures II

Effects of Magnetic Field Gradient on Particle Distributions of Suspension Comprised of

both Magnetic and Nonmagnetic Particles Using Two-Dimensional

Monte Carlo Simulations

X.L. Peng, M. Yan and H.L. Ge 1301

Modeling of Dynamic Characteristics of Ionic Polymer-Metal Composite Beam near

Resonant FrequenciesL. Zhang and Y.W. Yang 1305

Recent Development of Molecular Simulation Based on GPU in Material Science

K. YuandB.Zhu 1309

Nonlinear Dynamic FE Simulation of Smart Piezolaminated Structures Based on First- and

Third-Order Transverse Shear Deformation Theory

R. Schmidt and T.D. Vu 1313

Modeling and Simulations of Pd/n-ZnO Schottky Diode and its Comparisonwith Measurements

S. Faraz, H. Noor, M. Asghar, M. Willander and Q. Wahab 1317

Modeling and Optimization of Nanomechanics ofDiamond-Like Carbon by MPCVD Using

Response Surface MethodologyJ.S. Chen, K. Ting and H.C. Wang 1321

Study on Nanomechanical Properties of Dragonfly WingC.H. Chang, K. Ting and K.T. Chen 1325

Numerical Study on Damage Response of Ship Composite Armor Structures to Contact

Underwater ExplosionL. Yang, Y. Wang, Q.M. Zhang and Z.P. Du 1329

Electronic Structure of Bimetallic Fe/wAlw (m+n=6) Clusters

S.G. Chen, W.W. Sun, S.Q. Yu, X.J, Yin and Y.S. Yin 1333

First-Principles Calculations of Structural and Elastic Properties of HexagonalBoron Nitride

L. Xiao, W.J. He and Y.S. Yin 1337

VI. New Technologies of Materials Preparation

In Air Synthesis of Bi2Sj and PbS Microcrystals by Thermolysis of

Single-Source PrecursorsZ.N. Du and Y.C. Zhang 1343

Micromechanical Modeling of the Effect ofProgressive Damage on the Tensile Behavior in

Fiber-Reinforced Polymer CompositesF. Wang, Y.Q. Wei and Z.Q. Chen 1347

Magnetic Properties of MWNTs-Fe3Al CompositeL.X. Pang, D.J. Xing, A.Q. Zhang, J. Xu and S.S. Sun 1351

Studies on Synthesis, Morphology and Theoretical Analysis ofSchiff Base Derived From p-

Aminobenzoic Acid and />-Hydroxybenzaldehyde by Solvent-Free Reaction

Using Jet Milling

Y.H. Cai 1355

Preparation and Characterization of Ion Exchange Resin Mixed PolyethersulfoneHybrid Membranes

Y.Z. Zhang, R. Jia and H. Li 1359

Convective Heat Transfer Steady Thermal Stress in a Ceramic/FGM/Metal CompositeEFBC Plate with Temperature-Dependent Material Properties

Y.J. Xu and D.H. Tu 1363

Performance Deterioration Behavior of Existing Reinforced Concrete BridgesX.Z. An, C. Yi and R.X. Du 1367

Advanced Materials Research Vols. 79-82 Ixv

Low-Temperature Preparation ofBiomorphic TiC/C Ceramic in Molten Salt Media

H.X. Zhu, J. Ding, C.J. Deng and S.W. Zhang 1371

Synthesis of A18B„C7 from Ml Na2B4O7«10H2O/C Mixed Powders

C.J. Deng, W. Zhou, H.X. Zhu and Y. Yu 1375

Infrared Heating Applied in Titanium BrazingZ.Y. Wu, T.Y. Yeh and R.K. Shiue 1379

Light Induced Ferroelectric Domain Nucleation in LiNb03 CrystalY.L. Chen, H.W. Li and Y.A. Li 1383

Experimental Analysis and Performance Evaluation of Magnetorheological Damper under

High Impact Load

U.S. Hu, J. Wang, S.X. Qian and X.Z. Jiang 1387

Fracture Test and Numerical Analysis of Structural Steel Notched Plates Based on

Generalized Strength ModelW.Z. Wang, R.Q. Su, X.T. Wang and X. Feng 1391

Research on Surface Color, Properties of Thermo-Treated Reconstituted Bamboo Lumber

after Artificial Weathering Test

L. Qin and W.J. Yu 1395

Flexural Strength of Phenol Formaldehyde Composites Post-Cured in Microwaves:

Preliminary ResultsM. Trada, H. Ku and J. Vedhar 1399

Effect of Mn and Cu on Spheroidizcd Process of Mg-Zn-Y-Based Icosahedral

Quasicrystal PhaseZ.F. Wang, W.M. Zhao, X.P. Lin and B.Y. Hur 1403

Magnetic Properties and the Giant Magneto-Impedance in Joule-Heated Glass-Covered

Co-Based Microwire

B. Tian, L.H. Wang and L.Y. Zhou 1407

Design and Analysis of a Ring Type Traveling Wave Ultrasonic Motor Using Cantilever

Type Composite Transducer

Y.X. Liu, J.K. Liu, W.S. Chen and S.J. Shi 1411

Microstructure and Tensile Property of Zn-AI Alloy Reinforced with Titanium

Produced by ElectrolysisS.Q. Yan, J.P. Xie, W.Y. Wang and J.W. Li 1415

The Microstructure of The Semi-Solid ZL201 Alloy Obtained by Near-Liquidus

Electromagnetic Casting and the Fine Mechanism

W. Ping and L. Tian 1419

Semi-Solid Thixoforming Simulation ofZL201 Alloy Parts via AnyCastingL. Jing, L. Tian and W. Ping 1423

Experimental and Thermal Analysis of Sheet Molding Compound with MagnesiumOxychloride Crystal Salt Using as Flame Retardant

J. Li and Z.X. Huang 1427

Release of Aspirin from Biodegradable Polyesterurethane NetworksY.K. Feng, S.F. Zhang, L. Zhang, J.T. Guo and Y.S. Xu 1431

Synthesis and Characterization ofThermotropic Liquid Crystalline Polyesters/Glass Fiber

by In Situ Process

C. J. Zhang and Z.X. Huang 1435

Characterization of Hot Deformation of Nb-V-Ti Microalloyed Steel Using Processing MapS. Xiang and G.Q. Liu 1439

New Magnesium Alloys for Potential Application ofImplantation Biomaterial

R.G. Guan, T. Zhao, L.L. Wang and T. Cui 1443

Ixvi Multi-Functional Materials and Structures II

Far-Field Solution of Circular Lining and Linear Crack by Sll-Wave

H.L. Li and R. Zhang 1447

PVDF Films with Superhydrophobic Surface Fabricated by Plasma-Enhanced Chemical

Vapor DepositionZ.Q. Zhang, W.F. Yang, Z.Y. Gu and R.T. Huo 1451

Coupled Deflection Analysis ofSMA Fiber Hybrid Composite Active Blade

Y.S. Ren, S.L. Yang, T.R. Liu and X.H. Wang 1455

Laser Surface Alloying of NiCr-Cr3C2 and C-B-W-Cr Powders on Nodular Cast Iron Rolls

G. F. Sun, C.S. Liu, J. Liang, J.H. Zhou and X.Q. Tao 1459

Microstructures and Wear-Resistant Properties of In Situ WC,/W Wire Hybrid Reinforced

Iron Matrix Composites via Electromagnetic Field

L.B. Niu, Y.H. Xu and H. Wu 1463

Synthesis and Stability of Cubic Silicon Nitride

H. Yao, Q.Y. Xu and J.Y. Tang 1467

Instability of Functionally Graded Panels with Structural Damping under

Supersomic FlowS.L. Lee and J.H. Kim 1471

Synthesis, Structure and Electrochemical Behavior of a Supramolccular CompoundZ.F. Lin, S.F. Zhang and D. Zhang 1475

Synthesis and Electrochemical Behavior of Two Microporous PolyoxomolybdatesQ. Bao, S.F. Zhang and D. Zhang 1479

Solid Reaction and Microstructure of Interface of3D Meshy SiC„/Cu CompositeJ.Y.Li and H.Q. Ru 1483

Fracture Behavior of Particle Reinforced Metal Matrix CompositesW.D. Song, H.Y. Liu and J.G. Ning 1487

Moderation of Entrance Pressure Drop and Extrudate Swelling of Wood

Fiber/Polypropylene Composites Melt in Rotating-Die Extrusion Process

N. Intawong, C. Kantala, W. Lotaisong and N. Sombatsoinpop 1491

Diethylenetriamine-Assisted Hydrothermal Route to Synthesize Cuboidal Structure of

PbSe CrystalP.P. Xiao, F. Xue, T.T. Wang and Y.T. Qian 1495

Microstructure and Mechanical Property of 2.5D C/SiCN CompositeY. Xia, S.R. Qiao, Q.Q. Wang and C.Y. Zhang 1499

Influences of Fe2D3 Doping on the Crystallization of Si02-Al2Oj-MgO-K20-Zr02-FGlass-Ceramics

Q.B. Tian, L.N. Xu, L. Yang and Y.S. Yin 1503

Effect of Cold Rolling Deformation on Aging Precipitation of Cu-Cr-Sn-Zn AlloyJ.H. Su, S.G. Jia, F.Z. Ren, P. Liu and B.H. Tian

'

1507

A Green Approach to Preparing Nanosized Hollow Silica Microspheres with

Waste PolystyreneH.F. Wang, Z.Q. Wang, A.P. Wang, Z.B. Zhu and Y.S. Yin 1511

Investigation about Corrosion Properties of AZ31 Magnesium Alloy Coupled with

Nitrided 40Cr Steel

W.L. Zhao, Z.L. Wang, L.W. Tang and J. Zhang 1515

Resolution Wavelet and Online Damage Detection for Composite Material StructureDynamic Response Signal

W.B. Hu and Q. Deng 1519

Effects of Ultrasonic Vibration Treatment on Microstructure of Heat-Resistant Al-Si AlloyG. Zhong, S.S. Wu, H.W. Jiang, M. Sha and P. An 1523

Advanced Materials Research Vols. 79-82 Ixvii

Preparation and Property of Wood Polymer Composite with a Two-Step MethodY.F. Li, Y.X. Liu, H.P. Yu and W.S. Chen 1527

Preparation, Cytotoxicity and Degradability of Chitosan-Based Thermosensitive Hydrogelsas Drug Delivery System

H.Y. Zhou, J. Wang, W.F. Zhang, Y. Wang and X.G. Chen 1531

Preparation and Characterization of Gazxln2(1jc)0] Films Deposited on

«-Al203 (0001) by MOCVDL.Y. Kong, F. Yang, J. Ma, CM. Luan and Z. Zhu 1535

Structural and Optical Properties ofSn02 Films Grown on 6H-SiC by MOCVDZ. Zhu, J. Ma, C.N. Luan, F. Yang and L.Y. Kong 1539

Heterogeneous Preparation ofPolyaniline-Cellulose Conductive Composites with Cellulose

Pretreated by Ultrasonic and its Electrical PropertiesZ.L. Zhao, Z.L. Mo, C. Feng and J. Wang 1543

Synthesis and Characterization of Polyaniline/Montinorillonitc/La3+ NanoconipositesY.B. Wu, Z.L. Mo, H. Chen and G.P. Niu 1547

Polyaniline/GraphitenanosheetsAEu3+Nanocomposite: Synthesis and Characterization

Z.L. Mo, G.R. Wang, Y.B. Wu, G.P. Niu, C. Feng and J. Wang 1551

Synthesis and Characterizations of Cubic Assembly Composed of Platinum NanoparticlesM. Yang, X. Yang, J. Ma and K.C. Zhang 1555

Mechanism Researches on the Mutual Adaptability and the Dispersivity and Stability of

Nanoparticle-Modified Asphalt CompositeJ.S. Zhang, J. Li, R.X. Shi and L.X. Pang 1559

Notched Strength Prediction and Verification of APC-2 Composite Laminates at

Elevated TemperatureM.H.R. Jen, Y.C. Sung and Y.C Tseng 1563

Coprccipitation Synthesis and Negative Thermal Expansion of R2Mo3On (R = Y, Yb)H.T. Yang, W.L. Lin, F.L. Shang, Y.H. Huang and L. Gao 1567

Characterization of Wear Performance of Micro-Plasma Surface Hardened LayerG. Liu, G.M. Chen, L.Y. Wang, S.C. Hua and J.X. Yao 1571

Synthesis and Characterization of Highly Branched Poly(urethane-imide)sW.Q. Chen, CF. Yi and Z.S. Xu 1575

Electrical Behavior of SiCp Reinforced Copper Matrix Composites by Hot PressingC.C. Wang, G.H. Min and S.B. Kang 1579

Morphology of Electrospun Natural Rubber with Acrylonitrile-Butadiene-StyreneS. Sithornkul and P. Threepopnatkul 1583

Research on Heat Treatment Process of Foam Glass Prepared by Titania-Bcaring Blast

Furnace SlagH. Yang, M.L. Ma, M.L. Gao, X.X. Xue and Y.Q. Tang 1587

Structure and Properties ofEpoxy Resin/Poly (aryl ether ketone) Blends Cured

with 4,4'-DiaminodiphenylmethaneJ,G. Zhou andL.M.Zeng 1591

Bending Characteristics of Electrical Responsive Polyvinyl nlcohol)/Poly(acrylic acid)

Semi-Interpenetrating Polymer Network Hydrogel under DC Electric Field

W.W. Cui, L.Z. Liu and X.S. Zhu 1595

Mechanical Properties and Applications of CFRP in Retrofitting and Repairing Reinforced

Concrete Short Columns

W. Wang, X.J. Cai and S.Z. Tian 1599

Influence ofDoped Mn, Cu, Ni and Fe on Electrical Properties of SrTi03 Ceramics

N.Z. Wang, S. Sha and Y.T. Ma 1603

Ixviii Multi-Functional Materials and Structures II

Preparation and Properties Analysis of PolyaniIine/Nano-SrFei2Oi9 Composites with

Different Morphologies

Q.L. Li, C.R. Zhang and Y. Ye 1607

Microstructure and Properties of Ti-AI Based Composite Coating Prepared by

Electrospark Deposition Process

F. Guo, X.J. Su, P. Li, G.L. Hon and Z.X. Mei 1611

Influence ofDC-Joule Heat on Giant Magneto-Impedance of Co-Based Melt

Extraction Wires

S.L. Zhang, D.W. Xing, H. Wang, X. Xin and J. Sun 1615

Structure and Properties of Hydrogen-Charged Electrochromic Nb205 Ceramics

M.J. Ding, W.P. Chen, Y.H. Gu and Y. Wang 1619

Synthesis and Property of Y-Shaped Thermoresponsive Block Copolymers

X.D. Tang, X.C. Liang andN.F. Han 1623

Effect of Pore-Forming Agents on Structure and Properties of PVDF/PVC

Blend Membranes

H.L. Shen, L. Bai, H. Liao, C.F. Xiao and S.R. Jia 1627

A Novel Bioadhesive Protein of Silk Filaments Spun Underwater by Caddisfly Larvae

Y.J. Wang, K. Sanai and M. Nakagaki 1631

Electrodeposition of Silicon in Organic Solvent Containing Silicon Chloride

Q.P. Ma, W. Liu, B.C. Wang and Q.S. Meng 1635

Thermoelectric Properties of Y-Doped Mg2Si Prepared by Field-Activated and Pressure-

Assisted Reactive Sintering

Q.S. Meng, L.Q. Wang, B.S. Li, L.Z. Ding and S.P. Chen 1639

Preparation of Amorphous Calcium Phospliate/Triclcium Silicate Composite Powders

Q. Lin, Y.B. Li, X.H. Lan, C.H. Lu and Z.Z. Xu 1643

Preparation and Structural Phase Transitions of Silver Palmitatc

Y.L. Li, S. Wang, X. Zhang and X.L. Yang 1647

Permanent Mold Suction Casting for TiAl Based Alloys

Y.Q. Su, X.C. Ye, J.J. Guo, L.S. Luo, L. Wang and H.Z. Fu 1651

Microstructure Evolution of Directionally Solidified Al-25at.% Ni Peritectic Alloy

Y.Q. Su, D.M. Liu, X.Z. Li, L.S. Luo, J.J. Guo and H.Z. Fu 1655

The Preparation of Ti-6A1-4V Alloy Rod and Blade by Metal Mold Suction Casting and the

Effects ofHydrogen on Them

L. Wang, Y.Q. Su, X.C. Ye, L.S. Luo, J.J. Guo and H.Z. Fu 1659

The Research of SOL Treated Cantilever Beam Based on Analytical Methods and ANSYS

Y.P. Cao and X.H. Shi 1663

Research on the Anti-Static and Anti-Radiation Properties of Fabrics Containing Stainless

Steel Microfilament

Z.Q.Zhang and Y.H. Ye 1667

In Situ Growth of Carbon Nanotubes in Hydroxyapatite Matrix by Chemical

Vapor DepositionX.Y. Lu, H. Wang, S.Y. Xia, J.X. Wang and J. Weng 1671

Morphological Characterization of Chitosan in the Hydroxyapatite/Chitosan Nanocomposites

X.Y. Lu, X.H. Wang, J.X. Wang, S.X. Qu and J. Weng 1675

Research on the 1.06 urn Reflectivity of Subwaveleugth Surface-Relief Structure via Finite

Different Time Domain Method

W.J. Huang, C.H. Lu, W.M. Tan, Y. Zhang and Z.Z. Xu 1679

Phosphotungstic Acid/Semi-Coke Catalysts for Oxidative Desulfurization of Diesel Fuel

L. Wang, C.H. Li and Y.F. Hou 1683

Advanced Materials Research Vols. 79-82 Ixix

Study on Microstruclure and Properties ofAged Cu-Ti-Zr-RE AlloyX.M. Cao, Y.B. Zhu, F. Guo and C.J. Xiang 1687

Fabrication and Evaluation of Electrolyte-Supported Hollow Fiber Solid Oxide Fuel Cells

C.L. Yang, W. Li, S.Q. Zhang, J.J. Liu, C.S. Chen and W. Liu 1691

Hydrogen Permeation Performance and Chemical Stability ofNi-Lai.MCao.osCejO in an

H2S-Containing AtmosphereL.T. Yao, S.M. Fang and W. Liu 1695

The Study of Ultrasonic Dynamic Elastic Modulus of TiNiFe Shape Memory Alloy in

Heating Process

X.P. Gaoand F.S. Liu 1699

Switching Porphyrin Fluorescence on and off through Redox

P.H. Zhu, C. Zhu, Y.F. Zhao, Q. Wei and Y.L. Chen 1703

Structure and Photoluminescence Investigations of Self-Organized InAs/GaAs

Quantum Wires

L.M. Kong, C.X. Zhang, R. Wang and S.L, Wang 1707

Ci-ystal Structure and Optical Spectra ofEr:NaLaxYb<).;<(Si0.i)(i02 (x=0,3,5,7,9) CrystalsPrepared through a Hydrothermal Routine

W.Y. Zhang, C.H. Lu, Y.R. Ni, Y. Zhang, Z.Z. Xu and J.B. Song 1711

A New Phosphate-Bonded Investment Material for Rapid Ceramic Molding of Medium-

Size CastingsT.Z. Li, J.R. Luo, S.S. Wu and L. Wan 1715

Research on Purification of Attapulgite Clay and Adsorption Characteristics for

Metal Cations

Z.H. Zhang, S.Y. Zhang and X.D. Liu 1719

Preparation and Properties of Novel Bonded Perovskite Manganite Oxides

X.S. Yang, L.Q. Yang, L. Lv and Y. Zhao 1 723

High-Frequency Vibration Response of Metal Honeycomb Sandwich Structure

X.D. He, X.H. Kong, L.P. Shi and M.W. Li 1727

Accurate Displacement Measurement for Landslide Prediction by Sampling Moire Method

Y. Morimoto, M. Fujigaki, A. Masaya, H. Kondo and T. Inuzuka 1731

Study on Dynamic Friction Process of Sweat Self-Lubricating Composite at Elevated

Temperature Based on CA Method

S.S. Yan and Z.M. Liu 1735

Influences ofPretreatment Solution Concentrations on Copper-Doped SiC Particles Made

through Electroless Plating TechniqueM. Hu, Y.F. Su and M.Z. Wu 1739

Crystal Orientation and Surface Morphology of Sono-Electroplatcd Zinc Film from Alkali

Zincale Bath

A. Chiba 1743

Manufacturing of Heavy Plates with Excellent Mechanical Properties by a 40t ESR Furnace

for Slab Products

X. Geng, Z.H. Jiang, F.B. Liu and H. Peng 1747

Study on the Toughness Performance of Polypropylene Fiber and SBR Polymer Latex

Modified Cement Mortar

F. Xu, M.K. Zhou, W.G. Shen and B.X. Li 1751

Formation Enthalpies of 18 Carat Au-Cu-Ni-Zn-RE Alloys Calculated With Chou' Models

X.Z. Xiang, X.J. Bai, S.F. Ma, G.T. Zhang and Y.K. Su 1755

Investigation on Interlaminar Mechanical Properties of Hybrid CFRP/VGCF Laminates

Y. Li, N. Hori, M. Arai, H. Fukunaga and N. Hu 1759

Ixx Multi-Functional Materials and Structures II

Preparation ami Characterization ofNature Rubber/Attapulgite CompositesJ.H. Wang, D.J. Chen, H.L. Min and Z.F. Tang 1763

Studies on Preparation and Property of2.5D Si02f/ Si02 CompositesS.A. Han, K.H. Jiang and J.W. Tang 1767

Experiment Study on the Chloride Penetration of Steel Fibre Reinforced Concrete

M. Bai, D.T. Niu and X. Wu 1771

Microstructure and High Temperature Oxidation of the Hot-Dipping Al-Si Coating on Low

Carbon Steel in Ethanol, Water Vapor and Air at 700°C

M. Badaruddin and C.J. Wang 1775

Interlaminar Shear Strength of Glass Fiber Reinforced Dially Phthalate Laminates

Enhanced with NanoclaysZ.X. Kong and J.H. Wang 1779

Experimental Study for Performance Influence ofVarious pH Values on Pavement Straw

Composite Fibers

Q. Xue, J. Wang, X.T. Feng and X.L. Liu 1783

Hyclrotliermal Synthesis and Electrochemical Study of VOv/CNTs CompositesQ.Y. Zhu, S.P. Hu, F. Wu and W. Chen 1787

Microstructure Evolution and Mechanical Properties of 7A09 Aluminum Alloy duringRapid Solidifications

W.W. Wang, B.B. Jia and J.B. Yu 1791

Preparation of Semi-Solid Billet with Less Liquid Content of 7A09 Aluminum Alloy byPartial-Melting Method

W.W. Wang, J.L. Song and J.B. Yu 1795

Study on Antibacterial Mechanism of Ag-Inorganic Antibacterial Material

Containing Lanthanum

X.N. Tang, B. Zhang, G. Xie and X.S. Xia 1799

Interface Strength and Structure of Explosive Welding Sainless Steel-Aluminuin Clad

H.W. Liu and J.B. Yu 1803

Preparation of High-Purity YAG Powders by Gel Solid-State Reaction

X.H. Wang, G.Q. Zhao, S.B. Lu and G. Li 1807

Low Temperature Synthesis of Magnesium Aluminate Spinel from AlOOH and

MgO Powder

X.H. Wang, S.B. Lu, CM. Wang and H.B. Yu 1811

Thermal Energy Discharge Characteristics of a PCM Heat Exchanger with Calcium

Chloride HexahydrateX.Q. Zhu, H. Jin, Y.F. Yang, Z.S. Cao, J.S. Lu and J.L. Sun 1815

Sedimentation Equilibrium of TJltrafine Al(OH)3 Particles in Aqueous Solution

S. Zhao, Q. Ma, L.Y. Qiu and B. Yu 1819

Fabrication and Properties of Cc3+ and Tb3+ Co-Doped Ca2SrAl2Os PhosphorX. Li, L. Guan, C. Liu, F. Cong and Z.P. Yang 1823

Preparation of Nitrogen Doped ZnO Dilute Ferromagnetic Semiconductor byMagnetron Sputtering

W.S. Lin, W. Wei and W. Heng 1827

Oxygen Reduction Eleetrocatalysts Based on Two-Dimensional Iron PolyphthalocyanineG.F. Xu, Z.F. Li, S.W. Wang and X.J. Yu 1831

Low Velocity Impact Damage Evaluation of 2D C/SiC Composite Material

L.J. Yao, Z.Y. Feng and Q.Y. Cheng 1835

Fabrication of Polystyrene-Encapsulated Nanodiamond via In Situ Latex Polymerizationand their Wettability Evaluation

B. Bai, P.P. Wang, L. Yang and YJ. He 1839

Advanced Materials Research Vols. 79-82 Ixxi

Investigation on Microwave Absorbing Properties of Double-LayerCementitious Composites

X.Z. Zhang and W. Sun 1843

Preparation and Properties ofNano-Inorganic Mineral Material as LubricatingOil Additive

P. Wang, S.H. Zheng, Y.S. Yin and D.C. Su 1847

Growth of Carbon Nanocoils Using Chemical Vapor DepositionC.C. Su, Y.L. Hsieh and S.H. Chang I 851

Flexural Testing of Fiber Reinforced Polymer-Concrete Composite Bridge SuperstructureY.L. Wang, Q.D. Hao and J.P. Ou 1855

Damping Performance of Cocured Composite I-Shaped Beams with Embedded

Viscoelastic LayersC. Xu and S.Lin 1859

Anti-Wear and Reduce-Friction Ability ofZrCh/SiCh Self-Lubricating CompositesS.Y. Ma, S.H. Zheng, H.Y. Ding and W. Li 1863

Developing a New Method for the Formation of NiO Hollow Microspheres UsingYeasts as Bio-Templates

L. Yang, W.S. Guan, B. Bai and Y. Xiang 1867

Study on the Wear Resistance of ZnA127 Composite Reinforced by SiC Particles

J.P. Xie, S.Q. Yan, A.Q. Wang, W.Y. Wang, G.W. Li and X.L. Li 1871

Effects of Chlorine Ion on the Photocatalytic Activity of Cuprous Oxide Powders Preparedby Hydrothermal Method

J.W. Zhai, R.J. Gao, K.G. Jiang and M.Z. Sun 1875

Preparation of Low Chlorine Shellac from Seedlac by Dechlorination Process Using Pd/Fe

Binary Metal as CatalystY.L. Liao, F.C. Xu and D.B. Li 1879

Synthesis of NH2-Functionalized Nano-Fe304 Magnetic Polymer Adsorbent and its

Application for the Removal of Cr (VI) from Industrial Wastewater

Y.G. Zhao, H.Y. Shen, M.Q. Hu, F. Wei, Y.J. Luo and Q.H. Xia 1883

Improvement on the Efficiency ofDrawing during the Production of

Microfibrillar CompositesR.J.T. Lin, S. du Preez, J. Slaats and D. Bhattacharyya 1887

A Study of Surface Treatment on LY12 Aluminum Alloy by y-APSD.S. Xia, Y.Z. Gao, H.C. Zhang and Y. Yu 1891

Thermal Parameters of Sweat Lubricating Composite and its Effect on High Temperature

Rolling BearingY. Lu and Z.M. Liu 1895

Research on the Growth Mechanism of Alumina Ceramics with Columnar Grain

S.F. Rong, Y.C. Zhu, J.Q. Zhang, H.L. Liu and C.Y. Shi 1899

Research on Zinc-Silica Composite PlatingY.Y. Fan, Y.J. Zhang and P. Dong 1903

Experimental Research on the Preparation of Porous Activated Carbon from

Orange Wastes

Z.G.Xie 1907

Effects of Different Cooling Rate and Modifiers on the Microstructurcs of

4Y32 Aluminum AlloyG.S. Wang, Y.B. Zuo, Z.H. Zhao and J.Z. Cui 1911

Study on Seawater Corrosion of Fe-Al Intermctallic CompoundQ.H. Bai, X. Wang and W.T. Fan 1915

Ixxii Multi-Functional Materials and Structures II

The Uniform Elongation of Web and Flange of H-Beam

J.H. Ma, W.Z. Zhang, W. Chen, S.B. Zheng and H.B. Li 1919

Damage Evolution ofDelayed Fracture in Woven GFRP under Hot Water Environment

M. Kolani, K. Nakamichi, Y. Yasufuku and H. Kawada 1923

Oriented Growth of cBN Crystals Along [100] Direction in Hydrothermal Conditions

G. Lian, X. Zhang, L.L. Zhu, M. Tan, D.L. Cui and Q.L. Wang 1927

Influence ofDye-Polyether Derivatives Architecture on Parent C. I. Disperse

Yellow 64 DispersionX. Dong, Z.H. Zheng and IX. He 1931

Preparation of Inorganic/Organic Hybrid Membrane Adsorbents for Gasoline

Desulfurization: Control of the Membrane Structure

T. Wang, X.L. Zhao, Y.Z. Zhang and H. Li 1935

Dry Sliding Wear Behavior of Fe3Al Intermetallics Prepared by Mechanical Alloying and

Hot PressingJ. Li, K. Yu, L. Shi and Z.Q. Ma 1939

Carbonate Steelmaking Slag to Manufacture Building Materials

H. Z. Wu, J. Chang, Z.Z. Pan and X. Cheng 1943

Through-Thickness Texture Variation in Non-Oriented Electrical Steel Sheet Produced by

Asymmetric RollingW. Pei, Y.H. Sha, H.P. Yang, F. Zhang and L, Zuo 1947

Plastic Deformation and Damage Behavior of AL6XN Super-Austenitic Stainless Steels

C.Q. Ma, Q.Q. Duan and X.W. Li 1951

The Concentration Fluctuation near Critical Temperature of Liquid Bi3.uGa(,,,.7 AlloyZ.M. Wang, H.R. Geng, G.R. Zhou, Z.Q. Quo and X.Y. Teng 1955

Strength Prediction of Connecting Frame in Aircraft Composite Cabin

L.B. Zhao, F.R. Lin and J.Y. Zhang 1959

Mechanism of Steel Corrosion Inhibition Using Mannich Bases

C. Bogatu, 1. Manciulea and A. Duta 1963

Wet Surface Modification of Light Calcium Carbonate Powder by Aluminate

Coupling AgentL.C. Li and Y.Zhang 1967

Process Optimization of Preparation and Performance Characterization of Oily Sludge-Based Adsorbent Material by Pyrolysis

G.Y. Zhang, Y.F. Hou, C.H. Li, W. Zhu and J. Zhang 1971

Superdecp Penetration - Novel Method of Nanoreinforccd Composites Producing Based on

Metallic, Ceramic and Polymer Matrixes

0. Figovsky and S. Usherenko 1975

New Methods of Preparing Multi-Functional Nanocomposite CoatingsO. Figovsky 1979

Sic Based Ceramic Foams Reinforced by /// Situ Mullitc Whisker

X.L. Ji, F. Xu and H.Y. Chen 1983

Corrosion Properties of Magnetron Sputtered Al-Mg Alloy Coatings on High-SpeedElectro-Galvanizing Steel

X.L. Gu, Y.Q. Shan and C.S. Liu 1987

Fabrication of(TiB2, TiCJ/B^C Composites via TijAl IMC Added in B.,C Ceramics

Y.S. Yin, W.K. Zhang, L.H. Dong, Y. Lei, J. Li and L. Xiao 1991

Thickness Measurement of Composite Material Using Eddy Current TestingP.M. Chen, P.J. Huang, B. Ye, G.H. Li and Z.K. Zhou 1995

Advanced Materials Research Vols. 79-82 Ixxiii

Preparation of pH Sensitive Polyacrylic Acid(PAAc) Macroporous Hydrogels in AqueousNaCl Solutions and their Characterization

Y.H, Xue, W.Y. Zhao, S.F. Sun and H. Yu 1999

Effect of Small Addition of Niobium on the Mechanical Properties of FGBA/ BG Duplex PhaseAir Cooling Bainitic Steel

C. Feng and Y.K. Zheng 2003

Microstructure and Electrical Properties of La203-Doped ZnO-Bi203 Based

Varistor Ceramics

D. Xu, X.N. Cheng, M.S. Wang and L.Y. Shi 2007

Mechanical Properties and Ablation Behavior of Machinable ZrB2-SiC-BN Ceramics

H.T. Wu and W.G. Zhang 20 i I

Microstructural Evolution and Mechanical Properties of Powder Hot Extruded

Al-Zn-Mg-Cu AlloyS.Q. Wang, H.S. Yu, Z.Y. Zhang, G.H. Min and H. Yu 2015

Phase Evolution and Sintering Characteristics ofMullite-Based Ceramics Prepared from

Coal Fly Ash, Calcined Bauxite and Ball ClayX. Ma, X. Yao and S.D. Hua 2019

In Situ Observation of the Growing Surface Morphology of KDP Crystals by MicroscopeD.G. Zhong, B. Teng, M. Li, Q.G. Wang, Y.S. Zhao, F. You, H. Xu and S.M. Zhang 2023

Improvement Properties of Recycled Polypropylene by Reinforcement of Coir Fiber

P. Threepopnatkul, C. Kulsetthanchalee, K. Bunmee, N. Kliaklom and

W. Roddouyboon 2027

Detection and Characterization of Fatigue Induced Damage Using Electromechanical

Impedance TechniqueC.K. Sohand Y.Y. Lim 2031

Synthesis and Characterization of Platinum-Containing Ordered Mesoporous Carbon with

High Specific Surface Area

Z.H. Ji, Y.B. Jiang, H. Li, L. Ye, WJ. Han and T. Zhao 2035

Functional Silica Aerogels with High Specific Surface Area: Influence ofPreparationConditions on Structure Properties

L. Ye, W.J. Han, Z.H. Ji, J.D. Hu and T. Zhao 2039

Synthesis and Characterization of Water-Soluble CuJ+-Doped ZnSe Quantum Dots

S.S. Li, F.T. Liu, Q. Wang, X.X. Chen and P. Yang 2043

Fire-Damage or Freeze-Thaw of Strengthening Concrete Using Ultra HighPerformance Concrete

M.G. Lee and Y.S. Huang 2047

Pyrolysis Kinetic ofBasic Zinc Carbonate from Spent Catalyst and Preparation of Active

ZnO by Microwave HeatingZ.B. Zhang, Z.Y. Zhang, J.H. Peng, L.B. Zhang, W.W. Qu and W. Li 2051

Preparation and Biological Activity ofCliitosan Fibers Reinforced

PLLA/HA-CaSi03 CompositesJ. Wang, H.B. Li, J. Gao and X.C. Meng 2055

Synthesis and the Characterizations of Structure and Function of Gallic Acid

Macrocrystalline Cellulose Ester

N. Liu, G.Z. Fang and S. Su 2059

Electrical Response and Mechanical Behavior of Plasticized PVC Actuators

H. Xia, T. Ueki and T. Hirai 2063

Effect of Disbond Propagation on the Reflected Spectra of CFBG Sensors Embedded within

the Bondline of Composite Bonded Joints

Y.L. Guo, S.L. Ogin, T.F. Capell, A.M. Thorne, G.T. Reed, Y.S. Wang and S.C. Tjin 2067

Ixxiv Multi-Functional Materials and Structures II

Influence of Zinc-Zirconium Substitution on Magnetic Properties of Ba(ZnZr),Fci2-2xOi» Hexaferrite Prepared by the Molten Salt Method

H.F. Li, R.Z. Gong, X. Wang, L.R. Fan, G. He, M.Z. He and Z.K. Feng 2071

N-(n-butyl)-3-aminopropyltrimethoxysilane-Functional Modified Pyrophyllite:

Preparation, Characterisation and Pb(II) Ion Adsorption PropertyH.T. Liu, Y.Q. Zhou, Z.H. Sheng, C.L. Wu, J.F. Zhang, S. Lin and X.J. Weng 2075

Alkali-Activation Reactivity and AI Environment of ChcmosyntheticAl203-2Si02 Powders

G.I Zheng, X.M. Cui, W.P. Zhang and Z.F. Tong 2079

Synthesis, Characterization and Properties of a Novel Soluble Polyester Based on Fluorene

Y. Zhou, CM. Liu and L.H. Dong 2083

Performance and Tribology ofPolymer Matrix Friction Material Reinforced with Fibers

H.Y. Chen 2087

Study of the Morphology and Antibacterial Properties oi'Nano Silver Films Prepared on

Regenerated Cellulose Substrate

X. Wang, Y.H. Zhang, Q. Ji and Z.J. Liu 2091

Synthesis, Morphology and Photophysical Properties of Rod-Coil CopolymersY.Y. Yu, W.C. Chien and C.Y. Hsu 2095

Investigation on the Tap-Hole Clay under Thermal ProcessingS.L. Yang, J.H. Zhang, Y. Dong, S.B. Sun and P. Cui 2099

Preparation of Core/Shell Composite Latex Particles and Toughening Modification for

Polyamide 6

X.J. Liu, H.P, Li, F. Li, R.X. Tian and Q. Li 2103

TEM Microstructural Investigation of 0.63C-12.7Cr Martensitic Stainless Steel duringVarious Tempering Treatments

Y.L. Lin, C.C. Lin, A.C. Liu and H.J. Lai 2107

Dependence of Aspect Ratio onl-3 Polymer/Cement Based Piezoelectric

Composite PropertiesL.L. Guo, Y.P. Peng, S.S. Liao and S.F. Huang 2111

Synthesis, Characterization and Pliotocatalytic Performance of Novel CompositeAg/ BiV04 Photocatalysts

X.H. Zhang and L. Ge 2115

A Study on the Coating of Acupuncture Needle with Bioceramics to ImproveInsulation Performance

M.T. Kim, H.J. Chung, G.S. Choi, Y.B. Kim and ICY. Rhee 2119

Catalyst Assisted Synthesis of Carbon Nanotubes Using the V-Shaped PyrolysisFlame Method

Y.C. Liu, B.M. Sun and Z.Y. Ding 2123

Pliotocatalytic Reduction of Methyl Orange Using Titania Photocatalyst Codoped with

Nitrogen and Gadolinium under Visible Light Illumination

S.T. Gu, X. Wang, Q. Liu, H.Q. Liu, G.J. Jiang and M. Zhou 2127

Preparation of Cuprous Oxide from Industrial Leaching Liquid Using the Microwave

Thermo-Ethanol Method

H.Y. Lin, C.Y. Kuo, C.H. Wu and T.H. Lin 2131

Epoxy Curing System with Liquid l,3-Bis(3-aminopropyl) tetramethyl Disiloxane as CuringAgent for Advanced Electronic Package

H.Y. Li and C.H. Xie 2135

Optimization of Annealing Treatment Parameters in a Twin Roll Cast and Warm Rolled

Mg-4.5Al-l.0Zn AlloyH.M. Chen, H.S. Yu, S.B. Kang and G.H. Min 2139

Advanced Materials Research Vols. 79-82 Ixxv

High Temperature Thermoelectric Properties of Oxide CaaCo205G.J. Li, S.J. Zhao, A. Mei, J.L. Lan and Y.H. Lin 2143

Investigation on the Sound Absorption Properties of MPA/MR

Y.H. Ma, J. Hong, B. Zhu and H. Wang 2147

Effects of Aluminizing on the High Temperature Oxidation Behavior of High Silicon

Cast Iron

M.B. Lin and C.J. Wang 2151

A Facile Method of Surface Modification Based on the Adhesive Behavior of

Poly(dopamine) on CopperY. Chen, H.Y. Zhu, Y.H. Lei, W.W. Sun, Y.P. Liu and S.G. Chen 2155

Fabrication and Electric Properties of SrTi03.5/Nb-SrTi03 HeterjunctionM.C. Ni, Y.H. Wang, H.Y. Li, J.Y. Liu, Z.J. Wang and S.C. Li 2159

Effect of Fluctuation in Fiber Orientation on the Young's Modulus of Green CompositesB. S. Ren, J.J. Noda and K. Goda 2163

Multiscale Bone Remodeling Prediction for Fully Porous-Coated (FPC) Dental ImplantSupported Prosthesis

C. Rungsiyakull, Q. Li, W. Li and M.V. Swain 2167

The Effect of Excess Silane-69 Used for Surface Modification on Cure Characteristic and

Mechanical Properties ofPrecipitated Silica Filled Natural Rubber (PSi/NR)C. Thongpin, C. Sangnil, P. Suerkong, A. Pongpilaiprertti and N. Sombatsompop 2171

Influence of Curing Process on the Performance ofEpoxy Thermosets

B.H. Zhang, J.D. Ye, B. Chen and Y.Q. Weng 2175

Research on the Antifouling Mechanisms of Copper and its AlloysS.D. Ma, X. Zhao, H.R. Wang and J.Z. Duan 2179

The Effect of Second Filler on Cure Characteristic and Mechanical Properties of Si-69

Treated Precipitate Silica/NR CompositeC. Thongpin, C. Sripetdee, N. Papaka, N. Pongsathornviwa and N. Sombatsompop 2183

Study of AMP-Activated Protein Kinase Agonists by Structure-Based Drug DesigningY.H. Chang, T.Y. Ho, C.H. Wu, C.Y. Chen, H.J. Huang, F.J. Tsai, C.H. Tsai and C.Y.C. Chen 2187

Behavior ofHeavy Plastic Deformation of Cu-15Cr-0.1Zr In Situ CompositeY. Li, X.H. Chen, P. Liu, L.H. Gao and B.H. Tian 2191

Effect of Electrode Shape on Power and Internal Resistance in Benthic Microbial Fuel Cell

Material on Marine Sediment

J.H. Li, Y.B. Fu, J. Liu, A.L. Li and D.D. Ma 2195

Tribological Characteristics of Surface Treatment for Piston Pin

J.H. Seo, J.Y. Kim, S.U. Park, H.C. Kim, B.C. Na and D.S. Lim 2199

Synthesis of Crosslinkable Core-Shell Emulsion and Rheology of the Core-Shell/Amine

Crosslinking ProcessJ. Lu, A.J. Easteal, D. Bhattacharyya, C.J. Bolt and N.R. Edmonds 2203

Electronic Structure Study of Metal Complex o-Phenylenebis(nitrilomethylidyne)]di-2-naphtholato} Copper(II)

R.T. Xue, S.G. Chen, G.H. Gao and Y.S. Yin 2207

A Structural Improvement of Breaker Plates and Analysis oftheir Dynamic Properties in

Polymer Tube Extruders

J.H. Choi, S.H. Choi, K.S. Song and J.Y. Kim 2211

Fabrication and Residual Stresses of Aluminum Nitride Ceramics

Sintered at High-PressureX.L. Li, S.S. Li, H.A. Ma and X.P. Jia 2215

Reactive Adsorption of Sulfur Compounds from FCC Gasoline on NiO/y-Al203H.Y. Yin, C.H. Li, L.X. Wang and Y.M. Yu 2219

Ixxvi Multi-Functional Materials and Structures II

Structural Performance of Pultruded Composites under Elevated TemperaturesA.S. Mosallam 2223

A New Process and Structure of Al203/LaP04 CompositesQ.J. Zheng, X. Wang, X.R. Liu and Y.S. Yin 2227

Influence of Calcining Temperature on the Microstructure of LaPO,( Powders

Z.F. Liu, X. Wang, Y.S. Yin and Q. Liu 2231

Molten Salt Synthesis of LaP04:Eu3+Q. Liu, X. Wang, Z.F. Liu, H.Q. Liu, S.T. Gu, T. Jiang and M. Zhou 2235

Influence ofSi Content on the Oxide Scale Formation of Ni-Based AlloyC. Lei, X.C. Li, Z. Ning and Y.S. Yin 2239

Annealing Temperature Effect on Superelastic and Cyclic Response of NiTi SMA

L. Lan, A.K.T. Lau, Y.S. Yin and L. Tong 2243

3D Electromagnetic Simulation Study for the Distribution of Electromagnetic Field of

Microwave Sintering CavityL.X. Chen, C. Lei, Z. Ning, C.S. Jin and Y.S. Yin 2247

Microbiologically Influenced Corrosion of Fe3Al/Zr02 Composites in Marine Environment

X.T. Chang, S.G. Chen and Y.S. Yin 2251

Study on the Formation and Variation of Monodisperse Nano-Sized Polystyrene Beads bySuspension Polymerization with Hydrophilic Polymer as a Stabilizer

J.Y. Moon and M.S. Park 2255

Shape Memory Behavior of Ti-Rich Ti-Ni-Cu Melt-Spun Ribbons

W.J. He, G.H. Min and O.V. Tolochko 2259

Electroresponsive Property of Novel Poly(acrylate- acryloyloxyethyl trimethyl ammonium

chIoride)/Clay Nanocomposite HydrogelsP. Li, N.H. Kim, S. Bhadra and J.H. Lee 2263

Positive Temperature Coefficient Behavior of HDPE/EVA Blends Filled with Carbon Black

Q. Li, O.K. Park and J.H. Lee 2267

Partical Size and Morphology of Zeolite |J Influenced by Various Conditions in the

Hydrothermal SynthesisX.L. Feng, Y.Q. Liu, C.G. Liu, C.Y. Liu and H.P. Wang 2271

Preparation and Properties of TiN Thin Films by D.C. Reactive Magnetron SputteringY.Q. Shan, X.L. Gu and Y.X. Wang 2275

Evaluation of the Degree of Crystallization in Glass-Ceramics by Dielectric

Constant Measurements

Y. Han, S.Y. Yao, H.Q. Sun and W.W. Zhang 2279

Large-scale synthesis of ZnO nanorods by different surfactant-assisted and low-

temperature process

Z.X. Ma, N. Zhang, X.T. Cao, P.K. Yan 2283

Author Index 2287

Keyword Index 2301