multiband roof antenna with gps, gprs&3g, lte, 5g and …
TRANSCRIPT
POLOMARCONI offers a very wide range of wireless products.Our products can be tailored according to the customer’s need.
BY
TRANSPORT
Made in Italy. We reserve the right to modify these data without any notice. 1 / 2
ZEFIRO-G-DS REV. 08 - 19/05/2020
MULTIBAND ROOF ANTENNA WITH GPSGPRS&3G, LTE, 5G and Wi-Fi
ZEFIRO-G
Patent n° 1548873Antenna for train with protective means against high voltages.Patent has been used by SNCF and by the most important producers of trains.
Electrical Specifications
GPRS&3G BANDS
Frequency range (MHz)GSM 900
GSM 1800 UMTS
880 ÷ 9601710 ÷ 1880
1920 ÷ 2170
Input impedance (Ω) 50
Polarization vertical
VSWR< 2 for GSM 900
< 1.7 for GSM 1800 and UMTS
Gain (dBi)> 5 for GSM 900
> 6 for GSM 1800 and UMTS
Maximum rated RF power (W) 50
LTE & 5G BANDS
Frequency range (MHz)690 ÷ 862
2500 ÷ 26903400 ÷ 3800
Input impedance (Ω) 50
Polarization vertical
VSWR< 2 for 690 ÷ 862 MHz
< 1.7 for 2500 ÷ 2690 MHz< 2 for 3400 ÷ 3800 MHz
Gain (dBi)> 5 for 790 ÷ 862 MHz
> 7 for 2500 ÷ 2690 MHz> 8 for 3400 ÷ 3800 MHz
Maximum rated RF power (W) 50
Wi-Fi BANDS
Frequency range (MHz)2400 ÷ 25005150 ÷ 5875
Input impedance (Ω) 50
Polarization vertical
VSWR < 1.7
Gain (dBi)> 7 for 2400 ÷ 2500 MHz> 8 for 5150 ÷ 5875 MHz
Maximum rated RF power (W) 50
SATELLITE NAVIGATION AND GEOLOCALIZATION BANDS
Frequency band (MHz) 1574.42÷1576.42
Impedance (Ω) 50
PolarizationRight Hand Circular Polarization
(RHCP)
Gain (dBic) @ 90° of elevation ≥ 25 (typ.27), @T0=25°C, VDC=5V
Noise Figure (dB) ≤ 2.5, @T0=25°C, VDC=5V
Operating supply voltage (VDC) 3 ÷ 6
Current consumption (mA) ≤ 35, @T0=25°C, VDC=5V
Satellite navigationand geolocalization supported systems GPS
Operating Temp. Range (°C) -40 ÷ +85
Part Number Code Ed. 00 - 17/12/2018 Data Sheet Rev. 08 - 19/05/2020
POLOMARCONI offers a very wide range of wireless products.Our products can be tailored according to the customer’s need.
BY
TRANSPORT
Made in Italy. We reserve the right to modify these data without any notice. 2 / 2
ZEFIRO-G-DS REV. 08 - 19/05/2020
MULTIBAND ROOF ANTENNA WITH GPSGPRS&3G, LTE, 5G and Wi-Fi
ZEFIRO-G
Environmental Specifications
ATMOSPHERIC and CLIMATIC CONDITIONS according to NF EN 50155 and NF EN 60068
MECHANICAL CONDITIONS according to NF EN 50155, NF EN 60068, NF EN 61373 and 15-818
EMC according to CEI 61000 and ETSI GSM 11-10
HIGH VOLTAGE PROTECTION according to NF EN 50153 and NF EN 50124-1
DC GROUNDING, HIGH CURRENT PROTECTION according to NF EN 50153, UIC 758, UIC 533, NF EN 50388 and NF EN 50123
Short-circuit currents flow / time before breaking 70 kA / 5 ms – 40 kA / 100 ms (DC)31.5 kA / 10 ms – 15 kA / 100 ms (AC)
RoHS 2011/65/EU compliant
FLAMMABILITY RATING according to NF F16-101/102 and NF EN 45545-2
IP rating IP 66, IP 67 (when product mounted properly)
Grounding, high voltage and high current protection: our antennas have passed the strict SNCF’s tests, according to SNCF CT IG.TL GSM-R n° 2472, that approved our products as protected against lightning, high voltage and high current lines, thanks to our patented DC and AC grounding system.Drilling mask: please, refer to the relevant mounting instruction document.Advantage: GPS LNA amplifier integrated; there is no need for an external LNA GPS amplifier, as the internal GPS antenna is already amplified.
Mechanical Specifications
ConnectorsCELLULAR (2G/3G/4G), Wi-Fi, Wi-Max bands
Satellite navigation and geolocalization bands1 x N f
1 x TNC f
Dimensions (Height from installation surface x Width x Depth, mm) 100 x 100 x 315
Weight (kg) abt. 1.7
Colour radome grey
Materialsbase
radomealuminum with SURTEC 650 galvanic treatment
high impact polycarbonate
Mounting the antenna needs to be installed in longitudinal position with respect to the wind/driving direction
Ground plane requirement the antenna needs to be installed at the center of a metallic conductive surface with minimum sizes of 600x600mm.
In order to guarantee the SECURITY OF THE STAFF in case of fall of the catenary and possible consequent contact of the latter one with the antenna, it is necessary that the antenna base is connected to the train or vehicle ground reference using proper ground connection (please, refer to UIC 533 for the description
of the proper ground connection).
Part Number Code Ed. 00 - 17/12/2018 Data Sheet Rev. 08 - 19/05/2020