multifunctional gate box mgb - eltron
TRANSCRIPT
Multifunctional Gate BoxMGB
EN
2
Internationally successful – the EUCHNER company
EUCHNER GmbH + Co. KG is a world-leading company in the area of industrial safety technology. EUCHNER has been developing and producing high-quality switching sys-tems for mechanical and systems engineering for more than 60 years.The medium-sized family-operated company based in Leinfelden, Germany, employs more than 600 people around the world.
16 subsidiaries and other sales partners in Germany and abroad work for our inter-national success on the market.
Quality and innovation – the EUCHNER products
A look into the past shows EUCHNER to be a company with a great inventive spirit.We take the technological and ecological challenges of the future as an incentive for extraordinary product developments.
EUCHNER safety switches monitor safety doors on machines and installations, help to minimize dangers and risks and thereby reliably protect people and processes. Today, our products range from electromechanical and electronic components to intelligent integrated safety solutions. Safety for people, machines and products is one of our dominant themes.
We defi ne future safety technology with the highest quality standards and reliable technology. Extraordinary solutions ensure the great satisfaction of our customers. The product ranges are subdivided as follows:
Transponder-coded Safety Switches Transponder-coded Safety Switches with guard locking Multifunctional Gate Box MGB Access management systems (Electronic-Key-System EKS) Electromechanical Safety Switches Magnetically coded Safety Switches Enabling Switches Safety Relays Emergency Stop Devices Hand-Held Pendant Stations and Handwheels Safety Switches with AS-Interface Joystick Switches Position Switches
Headquarters in Leinfelden-Echterdingen
madeinGermany
Logistics center in Leinfelden-Echterdingen
Production location in Unterböhringen
Contents
3106109-09-03/16
General in�ormation 4
System overview and selection aid 7
Approvals and explanation o� symbols 8
Multifunctional Gate Box MGB
System �amily MGB 9
Interlocking sets MGB-L0-... 10
Locking sets MGB-L1-... 16
Locking sets MGB-L2-... 38
Technical data and dimension drawings 50
System �amily MGB with control module 53
Interlocking sets MGB-L0C-AR... 54
Locking sets MGB-L1C-AR... 56
Locking sets MGB-L2C-AR... 58
Technical data and dimension drawings 60
Expansions and accessories �or MGB-AP and MGB-AR 63
MG
B-AR
MG
B-A
PM
GB
-PN
System �amily MGB-PN 85
Locking sets MGB-L1-PN... 86
Locking sets MGB-L2-PN... 98
Control modules MGB-...-PN... 114
Technical data and dimension drawing 120
Item index 124
Item index by item designation 124
Item index by order numbers 126
4
General
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
A handle on the �uture
The MGB (Multi�unctional Gate Box) is a unique interlocking or guard locking system �or the protection o� sa�ety doors on machines and systems.
The MGB o��ers that little bit more: it is more than a sa�ety switch, more than a bolt, and o��ers a lot more �unctionality!
A system that can grow with your needsEven the basic system comprising handle module and evaluation module (as interlocking module or locking module) includes numerous �unctions.Whether interlocking, guard locking, escape release or other �unctions such as push buttons �or start/stop, emergency stop, etc. – the MGB meets all your requirements �or sa�ety-related applications.
And i� your needs grow, the MGB system grows with them. Due to the sophisticated modular design, the evaluation module can quickly become a small control panel.
Or with an additional control module straight awayIn the wide variety o� di��erent MGBs, you will defnitely fnd the right one �or your application. I� not, using the control module you can add lamps, pushbuttons or even completely di��erent operating �unctions. The con-trol module is permanently �astened to the evaluation module using the connection set.
Be certain o� compliance with standardsPer�ormance Level e in accordance with EN ISO 13849-1 or SIL3 in accordance with EN 62061 – even with the basic system you meet all these requirements. Also the requirements o� EN 14119 �or protection against tampering are met automatically, as each evaluation module is permanently assigned to a handle module in the unicode version.
Everything at a glanceThe LED indicator continuously provides you with all important system in�ormation. Diagnostics and status check!
Solid end stopA mechanical stop �or the handle module mounted in the door is per�ectly integrated into the locking module MGB-L…. A marking on the stop makes adjustment easier.
Interlocking/ locking module
Space �or ideas...Control elements and indicators in one housing cover turn the MGB into an all-rounder. Equipped with a start button, an emergency stop and/or other �unctions, the interlocking/locking module becomes a true control terminal.
Auxiliary releaseFor releasing the guard locking, e.g. in case o� a power �ailure.
Flexible color cover adaptationThe colors o� the pushbuttons can be adapted as required and interchanged. 5 di��erent color covers are available �or this purpose.
5
General
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Sa�ety remains the most important goalAre you locked in inside the danger area? The optional escape release is intuitive to operate! Whether in the event o� a power �ailure or active guard locking – the red door handle is simply pressed down to leave the danger area quickly.For protection when working in the danger area you can block the bolt tongue using up to 3 padlocks in the integrated lockout mechanism. Unintentional activation o� the interlocking/guard locking is prevented.Is the lockout mechanism to extend automatically when the door is open? No problem with the right handle module.
Easy to mount and sophisticated designAll MGB modules are optimized �or use on �ences made o� aluminum profles or steel �rames. The MGB is equally suitable �or doors hinged on the le�t or right. Both mounting and changing the actuating direction can be undertaken particularly quickly and easily. Usage on sa�ety doors that are not constructed o� profles, works o� course just as well.
The adjustment o� sa�ety doors in �ences changes over time. With ± 4 mm tolerance in the x direction as well as ± 5 mm in the z direction, the MGB is right there where the problem starts. Nevertheless, i� a sa�ety door should be even more out o� adjustment, the large �unnel in the evaluation module "catches" the bolt tongue and guides it into the center position. Bolt tongue, bolt guide and insertion �unnel will also withstand occasional slamming o� the door. Robust metal parts protect the MGB against this problem as well. To prevent injuries, the bolt tongue remains retracted with the door open. Do you use hinged doors or sliding doors? The MGB is suitable �or both. This aspect eases spare parts stockholding.
You always have an overviewFour built-in LEDs continuously provide all the necessary system in�orma-tion: power supply available, door closed, bolt tongue inserted, guard lock-ing activated, diagnostics messages – everything can be seen clearly at a glance. This in�ormation is o� course also available to the control system.
(Read on the next page what else there is in the MGB!)
Lockout mechanismThe bolt tongue can be blocked �or cleaning and service with max. 3 padlocks. Optionally with automatically extending second lockout mechanism.
Escape release (optional)The sa�ety system MGB can be complemented by an escape release module. The escape release enables people accidentally shut in to open the guard locked door �rom the danger area.
Door handle includedThe MGB has a robust door handle that can be rotated in 90° steps – to suit the installation.
Intelligent bolt tongueThe bolt tongue is reliably detected by the transponder as soon as it is inserted in the interlocking/locking module.
Escape release module
Handle module
6
General
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Sophisticated accessoriesWhether you need mounting plates �or easier attachment, pre-assembled cables or a long escape release actuator axis (as the sa�ety door needs to be very thick), you will fnd all you need in the accessories section.
Economical wiring according to standardsAll devices in the �amily AR can be wired directly in series in a so-called AR series connection without reducing sa�ety or the PL. As a consequence evaluation units are saved. AR devices are also available in the EUCHNER series CES and CET.The �amily MGB-AP is particularly suitable �or the protection o� individual sa�ety doors. I� series connection is not necessary, wiring can then be saved. This version has di��erent timing to the AR version.
Seamless integration by means o� bus connectionIn the PROFINET version we now also make the wiring easier �or you. You defne which element is to be integrated and the related �unction. The MGB supplies the protocol �rame with the necessary PROFINET input and output bytes required.Comprehensive diagnostic in�ormation in the �orm o� PROFINET messages makes troubleshooting quick and specifc. Due the typical ease with which parameters can be set in PROFINET, even the replacement o� the system in case o� service is a simple matter and can be undertaken in a �ew minutes.
Interlocking or guard locking?Functions o� the versions MGB-L0, MGB-L1 and MGB-L2 compared
Interlocking devices (MGB-L0, without guard locking)Together with a handle module, the interlocking module makes it possible to interlock the control o� movable sa�ety guards. The combination also serves as a mechanical door stop at the same time.The �ollowing switch-on condition applies to the sa�ety outputs FO1A and FO1B (see also System status table):
� Sa�ety guard closed (but can be opened at any time) � Bolt tongue inserted in the interlocking module
The interlocking module detects the position o� the sa�ety guard and the position o� the bolt tongue. The bolt tongue in the handle module is moved into and out o� the inter-locking module by actuating the door handle.
Guard locking devices (MGB-L1 and MGB-L2)Together with a handle module, the locking module makes it possible to lock movable sa�ety guards. The combination also serves as a mechanical door stop at the same time.The �ollowing switch-on condition applies to the sa�ety outputs FO1A and FO1B (see also System status table):
� Sa�ety guard closed � Bolt tongue inserted in the locking module � Locking arm in locking position (the door cannot be opened)
The locking module detects the position o� the sa�ety guard and the position o� the bolt tongue. The position o� the guard locking is also monitored.The bolt tongue in the handle module is moved into and out o� the locking module by actuating the door handle.When the bolt tongue is �ully inserted in the locking module, the locking arm locks the bolt tongue in this position. Depending on the version, this locking is by spring �orce or solenoid �orce.
� Version MGB-L1:The locking arm is held in the locked position by spring �orce and is unlocked by solenoid �orce (closed-circuit current principle).
� Version MGB-L2:The locking arm is held in the locked position by solenoid �orce and is unlocked by spring �orce when the solenoid is switched o�� (open-circuit current principle). Warning! The sa�ety guard can be opened immediately in the event o� interruption o� the solenoid power supply with the version MGB-L2-...! This type may be used only in special cases a�ter strict assessment o� the accident risk (see EN ISO 14119:2013, section 5.7.1)! Example: I� the risk o� accidental locking inside a sa�ety guard during a power �ailure is higher than the risk o� ine��ective guard locking.
Flexible adaptation through confgurationThe evaluation module can be confgured with the aid o� DIP switches. Depending on the setting, the evaluation module behaves like an MGB-AP or MGB-AR device. In addition, guard lock monitoring can be switched on or o��, i� guard locking is installed.From V2.2.0, an unlocking monitoring �unction can be activated that signals whether the auxiliary release or escape release was actuated when guard lock monitoring is active.
Connection to evaluation units or sa�e control systemsThe sa�ety system MGB can be connected to almost any sa�e evaluation unit or to any sa�e control system. For this purpose the short circuit monitoring on the control system is disabled – this �unction is per�ormed by the MGB. Per�ormance Level e is o� course retained.
The advantages o� the Multi�unctional Gate Box MGB
� Suitable �or all profles (optimized �or mounting on profles)
� Tolerance ± 4 mm in x direction, ± 5 mm in z direction
� Locking �orce 2000 N
� The MGB withstands �orces o� up to 300 Joule
� Optional escape release with door handle
� Optional push buttons and indicators can be integrated directly into the housing
� Stable metal stop prevents damage with bolt tongue extended
� Marking on the evaluation module as adjustment aid
� The actuating direction is easy to change without disassembly
� Hidden mounting holes with slots and metal mounting sur�aces
� Housing material made o� high quality, fber glass rein�orced plastic
� Escape release can also be used on doors with double rebate
There �eatures are available in all devices in the �amilies MGB-AP and MGB-AR
� Emergency release
� Connection by cable entry, max. 1.5 mm² or plug connector
� Plug connector connection, either M23 or M12 12-pin
� Series connection (only with system �amily AR, �or description see above)
� Connection o� pushbuttons to common power supply DC 24 V
� Connection o� lamps to common ground
� Operation o� guard locking via IMP as control input on PLC (only 3 mA)
� Monitoring outputs � OD = Door closed � OT = Bolt tongue inserted in the evaluation module (in case o� guard locking devices ready �or operation o� the sole-noid)
� OL = Guard locking solenoid kept in locked position � OI = Diagnostics, there is a �ault
7
System Overview Safety System MGB
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
System �amilies at a glanceThe tables on this page provide you a quick overview o� the �eatures and strengths o� the related product �amily as well as the possible expansions.
What system �amilies are available?
System �amily Symbol Use
MGB-AP AP I� series connection is not necessary, the number o� terminals can be reduced using this system �amily.
MGB-AR ARLinking o� several sa�ety guards on one shutdown path. As a consequence several sa�ety doors can be very simply polled using one evaluation unit or two control system inputs.
MGB-PNPN
How to utilize the maximum �unctionality o� the MGB in a Profnet environment. Ease o� replacement and �exibility are in the �oreground here.
It is possible to switch between the MGB-AP and MGB-AR �amilies using DIP switches.
System �amilies comparedThe tables provide you a quick overview o� the �eatures and strengths o� the related product �amily as well as the possible expansions.
Feature / special aspect System �amily
MGB-AP MGB-AR MGB-PN
Separate operation � � –
Series connection – � –
Bus connection – – �
Simple diagnostics � � �
Little wiring � � �
Key:
��Particularly suitable ��Suitable – Not applicable/not possible
Function / expansionSystem �amily
MGB-AP MGB-AR MGB-PN
Evaluation module with additional �unctions�
Selection �rom existing versions, customer-specifc version possible *
�Selection �rom existing versions,
customer-specifc version possible*
�Selection �rom existing versions,
customer-specifc version possible*
Control module with additional �unctions�
Flexible confguration by means o� kit MGB-C (only devices with cable entry)
�Flexible confguration by means o� kit MGB-C (only devices with cable entry)
�Confguration �rom �actory by
EUCHNER
Mounting plates � � �
Connection �or enabling switch �Available in some versions
� �Available in some versions
Escape release Already contained in some sets, can be upgraded at any time.
Key:
��Standard ��Optional or on request – Not possible
*) Note minimum order quantity o� 50 pieces!
8
General
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Explanation o� symbolsSystem �amilies
APSystem �amily MGB-AP �or separate operation
ARSystem �amily MGB-AR �or separate operation or series connection with other AR devices
PNSystem �amily MGB-PN �or operation in PROFINET environment
Sa�ety category/guard locking
Cat.4PLe
Suitable up to category 4 or Per�ormance Level e in accordance with EN ISO 13849-1
Guard locking �or personnel protection
Guard locking �or process protection
Controls and indicators
STOP
Emergency stop according to ISO 13850
STOP
Illuminated emergency stop
STOP
Emergency stop with monitoring contact
Machine stop (black-silver)
Machine stop (black-silver) with monitoring contact
Illuminated pushbutton
Pushbutton not illuminated
LED
0 1Selector switch �orm V
0 1Selector switch �orm V illuminated
0 1
Key-operated selector switch �orm V
0
1Key-operated selector switch �orm L
Pushbutton labeling "Unlocked"
Pushbutton labeling "Locked"
Other possible button labels
Approvals
To demonstrate con�ormity, the Machinery Directive also includes the possibility o� type examination. Although all relevant standards are taken into account during development, we have all our sa�ety switches subjected to additional type examinations by a notifed body. Many o� the devices listed in this catalog have been tested by the German Social Accident Insurance association (DGUV), �ormerly the employers' liability insurance association (BG), and are given in the lists �rom the DGUV. With the aid o� the approval symbols listed below you can quickly see which approvals are available �or the related devices:
Devices with this symbol are type examined by the German Social Accident Insurance association (DGUV) – �ormerly the employers' liability insurance association (BG)
All MGB devices comply with the stipulations o� Underwriter Laboratories (UL) and carry the symbol
9
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MG
B-AR
MG
B-A
P
Interlocking sets MGB-L0-… (without guard locking) 10 - 15
without controls and indicators 10
with 2 controls and indicators 12
with 3 controls and indicators 14
Locking sets MGB-L1-… (guard locking by spring �orce) 16 - 36
without controls and indicators 16
with 1 control and indicator 18
with 2 controls and indicators 20
with 3 controls and indicators 26
with 4 controls and indicators 34
Locking sets MGB-L2-… (guard locking by solenoid �orce) 38 - 49
without controls and indicators 38
with 2 controls and indicators 40
with 3 controls and indicators 44
with 4 controls and indicators 48
Technical data 50
Dimension drawings 51
Complete sets system �amilies MGB-AP/MGB-AR
� Interlocking or guard locking with handle module � With escape release � With pushbuttons and emergency stop � With plug connectors
10
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLe
Ordering table
� Can be connected in series with other AR devices (e.g. CES-AR, CET-AR and CTP-AR)
� With cable entry
Further in�ormation
� Dimension drawings see p. 51 � Technical data see p. 50 � Accessories and spare parts see p. 63 � www.euchner.de
Interlocking sets MGB-L0-… without controls or indicators
Modules in the set Ordering data, set
Locking module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�ac
tory
set
ting)
Version/confguration schemeOrder no. separate module
S1H1
S2H2
S3H3
S4H4
Wiring diagram Order no./item
AR
105331
– – – – A 100464
–
Right
105778 MGB-L0H-AR-R-105778
105331
100465 105780 MGB-L0HE-AR-R-105780
11
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MGB-L0...
MG
B-AR
MG
B-A
P
Block diagram
SafetyOutputs
Safety Inputs
Monitoring Outputs
MGB
FI1A
X4:1
FI1B
X4:2
RST
X4:6
FO1A
X4:4
FO1B
X4:5
OD
X5:1
OT
X5:2
OI
X5:4
0V
X5:5
0V
X3:5
UA
X3:4
UB
X5:6
Cable entryA
12
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLe
Ordering table �or complete sets
� Can be connected in series with other AR devices (e.g. CES-AR, CET-AR and CTP-AR)
� With cable entry � Integrated controls and indicators
Interlocking sets MGB-L0-… with 2 controls or indicators
Details
Lens setThe color o� the pushbutton can be selected using the lens set 120344 included.
Modules in the set Ordering data, set
Locking module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�ac
tory
set
ting)
Version/confguration schemeOrder no. separate module
S1H1
S2H2
S3H3
S4H4
Wiring diagram Order no./item
AR
121058
23
–
*) *)
– A 100464 – Right 121059 MGB-L0H-ARA-R-121059
* The color can be selected using the lens set included.
Further in�ormation
� Dimension drawings see p. 51 � Technical data see p. 50 � Accessories and spare parts see p. 63 � www.euchner.de
13
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MGB-L0...
MG
B-AR
MG
B-A
P
Block diagram and wiring diagram �or controls and indicators
23
SafetyOutputs
Safety Inputs
Monitoring Outputs
H3S3
0V
UA
S2 H2MGB
FI1A
X4:1
FI1B
X4:2
RST
X4:6
FO1A
X4:4
FO1B
X4:5
OD
X5:1
OT
X5:2
OI
X5:4 X2:7 X3:2
X3:1 X3:3
0V
X5:5
0V
X3:5
UA
X3:4
UB
X5:6
Cable entryA
14
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLe
Interlocking sets MGB-L0-… with 3 controls or indicators
Ordering table
� Can be connected in series with other AR devices (e.g. CES-AR, CET-AR and CTP-AR)
� With cable entry or plug connector � Integrated controls and indicators
Further in�ormation
� Dimension drawings see p. 51 � Technical data see p. 50 � Accessories and spare parts see p. 63 � www.euchner.de
Details
Emergency stop with monitoring contactAdditional normally open contact in the emer-gency stop, e.g. as monitoring contact �or the control system.Lens setThe color o� the pushbutton can be selected using the lens set 120344 included.Adhesive labelsDevices with adhesive labels have pre-�ormed recesses. The adhesive labels enclosed (stan-dard size 12.5 x 27 mm) can be a�fxed in these recesses.
Modules in the set Ordering data, set
Locking module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�ac
tory
set
ting)
Version/confguration schemeOrder no. separate module
S1H1
S2H2
S3H3
S4H4
Wiring diagram Order no./item
AR
121232
1 23
STOP
*) *)
– A
100464
100465
Right
121233 MGB-L0HE-ARA-R-121233
121253
1 23
Incl. adhesive labels–
121254 MGB-L0H-ARA-R-121254
121259
1 23
Incl. adhesive labels
106619 Le�t 121260 MGB-L0H-ARA-L-121260
116300
321
Incl. adhesive labels STOP
ye wh
– B
111157
100465
Right 110691 MGB-L0HE-ARA-R-110691
116302
312
Incl. adhesive labels
111158 Le�t 110692 MGB-L0HE-ARA-L-110692
* The color can be selected using the lens set included.
15
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MGB-L0...
MG
B-AR
MG
B-A
P
Block diagram and wiring diagrams �or controls and indicators
Cable entry
SafetyOutputs
Safety Inputs
Monitoring Outputs
X2:1 X2:6
H2 H3S2 S3
0V
UA
S1
FI1A
X4:1
FI1B
X4:2
RST
X4:6
FO1A
X4:4
FO1B
X4:5
OD
X5:1
OT
X5:2
OI
X5:4
0V
X5:5
0V
X3:5
UA
X3:4
UB
X5:6 X3:3X2:3 X2:4
X2:2 X2:7 X3:2
X3:1
MGB
A
Plug connector M23
Monitoring Outputs
Safety Inputs S1 S2 S3H2 H3
UA
0V
SafetyOutputs
13
UAUB
6 1811
17
16
4
FO1A
5
FO1B
RST
7
8
OT
9
OI
19
0V
10
14
12
FE
15
FI1A
2
FI1B
3
NC
1
MGB
B
1 23
16
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLe
Ordering table
� Can be connected in series with other AR devices (e.g. CES-AR, CET-AR and CTP-AR)
� With cable entry or plug connector
Further in�ormation
� Dimension drawings see p. 51 � Technical data see p. 50 � Accessories and spare parts see p. 63 � www.euchner.de
Locking sets MGB-L1-… (guard locking by spring �orce)without control or indicator
Modules in the set Ordering data, set
Locking module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�ac
tory
set
ting)
Version/confguration schemeOrder no. separate module
S1H1
S2H2
S3H3
S4H4
Wiring diagram Order no./item
AR
104302
– – – –
A
100464
100465
Right
105784 MGB-L1HE-AR-R-105784
–
105782 MGB-L1H-AR-R-105782
111071
B
111070 MGB-L1H-ARA-R-111070
111074
106619 Le�t 111073 MGB-L1H-ARA-L-111073
17
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MGB-L1...
MG
B-AR
MG
B-A
P
Block diagram
IMP1/IMP2 must bebridged (default)
SafetyOutputs Monitoring Outputs
Safety Inputs
Guard Locking
| |
Solenoid configurationsingle channel
(1x p-switching)
IMP1
X3:7
FO1B
X4:5
UA
X3:4
OI
X5:4
IMP2
X3:6
FI1A
X4:1
FI1B
X4:2
FO1A
X4:4
OD
X5:1
RST
X4:6
OT
X5:2
OL
X5:3
UB
X5:6
0V
X5:5
0V
X3:5
NC
X3:8
MGB
Cable entryA
SafetyOutputs
Safety Inputs
Monitoring OutputsGuard Locking
IMP1/IMP2 must bebridged (default)
Solenoid configurationsingle channel
(1x p-switching)
FI1A
2
FI1B
3
RST
7
4
FO1A
5
FO1B
11
OD
8
OT
10
OL
9
OI
UAUB
6
NC
13
19
0V
IMP1
1
12
FE
NC
14
NC
15
NC
16
NC
17
NC
18
MGB
Plug connector M23B
18
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLe
Locking sets MGB-L1-… (guard locking by spring �orce)with one control or indicator
Ordering table
� Can be connected in series with other AR devices (e.g. CES-AR, CET-AR and CTP-AR)
� With cable entry or plug connector � Integrated control and indicator
Details
Lens setThe color o� the pushbutton can be selected using the lens set 120344 included.
Modules in the set Ordering data, set
Locking module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�ac
tory
set
ting)
Version/confguration schemeOrder no. separate module
S1H1
S2H2
S3H3
S4H4
Wiring diagram Order no./item
AR
120990
1
*)
– – –
A
100464
100465
Right
120991 MGB-L1HE-ARA-R-120991
121034
1
B
121035 MGB-L1HE-ARA-R-121035
121039
1 106619 Le�t 121040 MGB-L1HE-ARA-L-121040
* The color can be selected using the lens set included.
Further in�ormation
� Dimension drawings see p. 51 � Technical data see p. 50 � Accessories and spare parts see p. 63 � www.euchner.de
19
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MGB-L1...
MG
B-AR
MG
B-A
P
Block diagram and wiring diagrams �or control and indicator
1
Cable entry
Monitoring Outputs
Safety Inputs
H1
0V
UA
S1
SafetyOutputs
IMP1/IMP2 must bebridged (default)
Guard Locking
| |
Solenoid configurationsingle channel
(1x p-switching)
OI
X5:4
X2:6
FI1A
X4:1
FI1B
X4:2
FO1A
X4:4
FO1B
X4:5
RST
X4:6
OT
X5:2
OL
X5:3 X2:2
OD
X5:1
IMP1
X3:7
UA
X3:4
IMP2
X3:6
UB
X5:6
0V
X5:5
0V
X3:5
NC
X3:8
MGB
A
Plug connector M23
Monitoring Outputs0V
UA
S1 H1
12
FE
SafetyOutputs
Safety Inputs
Guard Locking
IMP1/IMP2 must bebridged (default)
Solenoid configurationsingle channel
(1x p-switching)
RST
7
9
OL
10
OI
11
13
8
OT
NC
14
NC
15
NC
16
NC
17
FI1A
2
FI1B
3
4
FO1A
5
FO1B
UAUB
6
NC
18
19
0V
IMP1
1
MGB
B
20
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLe
Locking sets MGB-L1-… (guard locking by spring �orce)with 2 controls or indicators
Ordering table
� Can be connected in series with other AR devices (e.g. CES-AR, CET-AR and CTP-AR)
� With cable entry or plug connector � Integrated controls and indicators
Details
Emergency stop with monitoring contactAdditional normally open contact in the emer-gency stop, e.g. as monitoring contact �or the control system.Key-operated switch
� Form L, 90° angle o� rotation with 2 posi-tions. The key latches in both positions and can be removed in both positions. Devices with key-operated switch �orm L have degree o� protection IP54.
� Form V, 40° angle o� rotation with 2 posi-tions.The key latches in position 0 and can be removed in position 0.
Lens setThe color o� the pushbutton can be selected using the lens set 120344 included.
(Continued on next page)
Modules in the set Ordering data, set
Locking module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�ac
tory
set
ting)
Version/confguration schemeOrder no. separate module
S1H1
S2H2
S3H3
S4H4
Wiring diagram Order no./item
AR
121130
1 2STOP
*)
– – A 100464 100465 Right 121131 MGB-L1HE-ARA-R-121131
121050
1 2
*) *)
– – B 100464
–
Right
121051 MGB-L1H-ARA-R-121051
100465 121052 MGB-L1HE-ARA-R-121052
124691
1 2
IP54 0
1
Form L,90°
*)
– – C
100464
–
Right 124098 MGB-L1H-ARA-R-124098
124692
2 1
IP54
106619 Le�t 124099 MGB-L1H-ARA-L-124099
* The color can be selected using the lens set included.
Adhesive labelsDevices with adhesive labels have pre-�ormed recesses. The adhesive labels enclosed (stan-dard size 12.5 x 27 mm) can be a�fxed in these recesses.
Further in�ormation
� Dimension drawings see p. 51 � Technical data see p. 50 � Accessories and spare parts see p. 63 � www.euchner.de
21
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MGB-L1...
MG
B-AR
MG
B-A
P
1 2
Ordering table (continued)
Modules in the set Ordering data, set
Locking module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�act
ory
sett
ing)
Version/confguration schemeOrder no. separate module
S1H1
S2H2
S3H3
S4H4
Wiring diagram Order no./item
AR
119806
1 2
IP54
wh
0 1
Form V 40°
– – D
114655
100465
Right 119807 MGB-L1HE-ARA-R-119807
119808
2 1
IP54
114656 Le�t 119809 MGB-L1HE-ARA-L-119809
121060
23
–
*) *)
– E
100464
–
Right
121061 MGB-L1H-ARA-R-121061
100465
121062 MGB-L1HE-ARA-R-121062
121086
23
Incl. adhesive labels
121087 MGB-L1HE-ARA-R-121087
(with lens set 120378)
– 121170 MGB-L1H-ARA-R-121170
121088
32
Incl. adhesive labels
106619
–
Le�t
121171 MGB-L1H-ARA-L-121171
100465
121089 MGB-L1HE-ARA-L-121089
(with lens set 120378)
121067
32
121069 MGB-L1HE-ARA-L-121069
– 121068 MGB-L1H-ARA-R-121068
* The color can be selected using the lens set included. (Continued on next page)
22
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLe
Ordering table (continued)
Locking sets MGB-L1-… (guard locking by spring �orce)with 2 controls or indicators
Modules in the set Ordering data, set
Locking module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�act
ory
sett
ing)
Version/confguration schemeOrder no. separate module
S1H1
S2H2
S3H3
S4H4
Wiring diagram Order no./item
AR
121104
21
Incl. adhesive labels
*) *)
– – F
100464
–
Right 121105 MGB-L1H-ARA-R-121105
121106
12
Incl. adhesive labels
106619 Le�t 121107 MGB-L1H-ARA-L-121107
111653
32
Incl. adhesive labels–
ye wh
– G
100464
–
Right 111655 MGB-L1H-ARA-R-111655
111654
32
Incl. adhesive labels
106619 Le�t 111656 MGB-L1H-ARA-L-111656
* The color can be selected using the lens set included.
23
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MGB-L1...
MG
B-AR
MG
B-A
P
1 2
Block diagram and wiring diagrams �or controls and indicators
Cable entry
SafetyOutputs Monitoring Outputs
Safety Inputs
H1
0V
UA
S2
IMP1/IMP2 must bebridged (default)
Guard Locking
| |
Solenoid configurationsingle channel
(1x p-switching)
OI
X5:4
X2:6
FI1A
X4:1
FI1B
X4:2
FO1A
X4:4
FO1B
X4:5
RST
X4:6
OT
X5:2
OL
X5:3 X2:7
OD
X5:1
IMP1
X3:7
UA
X3:4
IMP2
X3:6
UB
X5:6
0V
X5:5
0V
X3:5
NC
X3:8
MGB
D
Cable entry
SafetyOutputs Monitoring Outputs
Safety Inputs
H2
0V
UA
S1 S2
IMP1/IMP2 must bebridged (default)
Guard Locking
| |
Solenoid configurationsingle channel
(1x p-switching)
OI
X5:4 X2:7
X3:1
FI1A
X4:1
FI1B
X4:2
FO1A
X4:4
FO1B
X4:5
RST
X4:6
OT
X5:2
OL
X5:3 X2:1
OD
X5:1
IMP1
X3:7
UA
X3:4
IMP2
X3:6
UB
X5:6
0V
X5:5
0V
X3:5
NC
X3:8
MGB
C
Cable entry
Monitoring Outputs
Safety Inputs
H2S2
0V
UA
S1 H1
SafetyOutputs
IMP1/IMP2 must bebridged (default)
Guard Locking
| |
Solenoid configurationsingle channel
(1x p-switching)
X3:1
OI
X5:4 X2:7
X2:6
FI1A
X4:1
FI1B
X4:2
FO1A
X4:4
FO1B
X4:5
RST
X4:6
OT
X5:2
OL
X5:3 X2:1
OD
X5:1
IMP1
X3:7
UA
X3:4
IMP2
X3:6
UB
X5:6
0V
X5:5
0V
X3:5
NC
X3:8
MGB
B
Cable entry
Monitoring Outputs
Safety Inputs
H2S2
0V
UA
S1
SafetyOutputs
IMP1/IMP2 must bebridged (default)
Guard Locking
| |
Solenoid configurationsingle channel
(1x p-switching)
X2:3 X2:4
OI
X5:4 X2:2 X2:7
X3:1
FI1A
X4:1
FI1B
X4:2
FO1A
X4:4
FO1B
X4:5
RST
X4:6
OT
X5:2
OL
X5:3 X2:1
OD
X5:1 X2:6
IMP1
X3:7
UA
X3:4
IMP2
X3:6
UB
X5:6
0V
X5:5
0V
X3:5
NC
X3:8
MGB
A
24
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLe
Locking sets MGB-L1-… (guard locking by spring �orce)with 2 controls or indicators
Block diagram and wiring diagrams �or controls and indicators
Plug connector M23
H3S3
0V
UA
S2 H2
Monitoring OutputsSafety
Outputs
Safety Inputs
Guard Locking
IMP1/IMP2 must bebridged (default)
Solenoid configurationsingle channel
(1x p-switching)
18
RST
7
8
OT
9
OI
15
16
17
NC
10
NC
11
NC
14
FI1A
2
FI1B
3
4
FO1A
5
FO1B
UAUB
6
NC
13
19
0V
IMP1
1
12
FE
MGB
G
Plug connector M23
H2S2
0V
UA
S1 H1
Monitoring OutputsSafety
Outputs
Safety Inputs
Guard Locking
IMP1/IMP2 must bebridged (default)
Solenoid configurationsingle channel
(1x p-switching)
18
RST
7
8
OT
9
OI
15
16
1710
OL
NC
11
NC
14
FI1A
2
FI1B
3
4
FO1A
5
FO1B
UAUB
6
NC
13
19
0V
IMP1
1
12
FE
MGB
F
Cable entry
Monitoring Outputs
Safety Inputs
H3S3
0V
UA
S2 H2
SafetyOutputs
IMP1/IMP2 must bebridged (default)
Guard Locking
| |
Solenoid configurationsingle channel
(1x p-switching)
X3:3
OI
X5:4 X3:2
X3:1
FI1A
X4:1
FI1B
X4:2
FO1A
X4:4
FO1B
X4:5
RST
X4:6
OT
X5:2
OL
X5:3 X2:7
OD
X5:1
IMP1
X3:7
UA
X3:4
IMP2
X3:6
UB
X5:6
0V
X5:5
0V
X3:5
NC
X3:8
MGB
E
25
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MGB-L1...
MG
B-AR
MG
B-A
P
1 2
26
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLe
Locking sets MGB-L1-… (guard locking by spring �orce)with 3 controls or indicators
Ordering table
� Can be connected in series with other AR devices (e.g. CES-AR, CET-AR and CTP-AR)
� With cable entry or plug connector � Integrated controls and indicators
Details
Release monitoring activatedWhen release monitoring is active, the system enters into a latching �ault when the escape release or auxiliary release is actuated.Emergency stop with monitoring contactAdditional normally open contact in the emer-gency stop, e.g. as monitoring contact �or the control system.Connection �or enabling switchThe devices have an M12 plug connector �or the direct connection o� an enabling switch (e.g. ZSA, order no. 110560).Lens setThe color o� the pushbutton can be selected using the lens set 120344 included.
Adhesive labelsDevices with adhesive labels have pre-�ormed recesses. The adhesive labels enclosed (stan-dard size 12.5 x 27 mm) can be a�fxed in these recesses.Selector switchSelector switch with 2 positions (�orm V, 90°). The switch latches in both positions.Machine stopVersion as emergency stop but in gray/yellow, e.g. as machine stop. Important: Do not use as emergency stop!
Further in�ormation
� Dimension drawings see p. 51 � Technical data see p. 50 � Accessories and spare parts see p. 63 � www.euchner.de
Modules in the set Ordering data, set
Locking module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�ac
tory
set
ting)
Version/confguration schemeOrder no. separate module
S1H1
S2H2
S3H3
S4H4
Wiring diagram Order no./item
AP
115224
1 23
STOP
wh wh
– A
100464
–
Right 115178 MGB-L1H-APA-R-115178
115225
32 1 106619 Le�t 115179
MGB-L1H-APA-L-115179
110585
423
Plug connector M12 �or enabling switch, incl.
adhesive labels–
wh ye bu
B
100464
–
Right 110587 MGB-L1H-APA-R-110587
110586
432
Plug connector M12 �or enabling switch, incl.
adhesive labels
106619 Le�t 110588 MGB-L1H-APA-L-110588
(Continued on next page)
27
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MGB-L1...
MG
B-AR
MG
B-A
P
1 23
Ordering table (continued)
Modules in the set Ordering data, set
Locking module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�act
ory
sett
ing)
Version/confguration schemeOrder no. separate module
S1H1
S2H2
S3H3
S4H4
Wiring diagram Order no./item
AP
115894
321
STOP
gn rd
– C
111157
–
Right 115895 MGB-L1H-APA-R-115895
115896
312 111158 Le�t 115897
MGB-L1H-APA-L-115897
114235
423
Plug connector M12 �or enabling switch
–
wh ye bu
D
111157
–
Right 114236 MGB-L1H-APA-R-114236
114237
423
Plug connector M12 �or
enabling switch
111158 Le�t 114238 MGB-L1H-APA-L-114238
AR
110219
1 23
STOP
ye wh
– E 100464
–
Right
105783 MGB-L1H-AR-R-105783
100465 110220 MGB-L1HE-AR-R-110220
121255
1 23
Incl. adhesive labels STOP
*) *)
– E 100464
–
Right
121256 MGB-L1H-ARA-R-121256
121234
1 23
100465 121236 MGB-L1HE-ARA-R-121236
* The color can be selected using the lens set included. (Continued on next page)
28
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLe
Modules in the set Ordering data, set
Locking module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�act
ory
sett
ing)
Version/confguration schemeOrder no. separate module
S1H1
S2H2
S3H3
S4H4
Wiring diagram Order no./item
AR
121261
32 1
Incl. adhesive labelsSTOP
*) *)
– E 106619
–
Le�t
121262 MGB-L1H-ARA-L-121262
121241
32 1 100465 121243
MGB-L1H-ARA-L-121243
109314
1 23
STOP
wh
0 1
Form V90°
– F 100464 100465 Right 109313 MGB-L1HE-AR-R-109313
121411
1 23
Incl. adhesive labels
*) *)
– E
100464
–
Right 121412 MGB-L1H-ARA-R-121412
121413
32 1
Incl. adhesive labels
106619 Le�t 121414 MGB-L1H-ARA-L-121414
117310
321
Incl. adhesive labels STOP
ye wh
– G
111157
–
Right 117314 MGB-L1H-ARA-R-117314
117312
312
Incl. adhesive labels
111158 Le�t 117316 MGB-L1H-ARA-L-117316
Ordering table (continued)
Locking sets MGB-L1-… (guard locking by spring �orce)with 3 controls or indicators
* The color can be selected using the lens set included. (Continued on next page)
29
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MGB-L1...
MG
B-AR
MG
B-A
P
Modules in the set Ordering data, set
Locking module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�act
ory
sett
ing)
Version/confguration schemeOrder no. separate module
S1H1
S2H2
S3H3
S4H4
Wiring diagram Order no./item
AR
121215
321
Incl. adhesive labelsSTOP
*) *)
– H
100464
100465
Right 121216 MGB-L1HE-ARA-R-121216
121217
312
Incl. adhesive labels
106619 Le�t 121218 MGB-L1HE-ARA-L-121218
110792
321
Incl. adhesive labels
STOP
ye wh
– H
100464
–
Right 110613 MGB-L1H-ARA-R-110613
110793
312
Incl. adhesive labels
106619 Le�t 110614 MGB-L1H-ARA-L-110614
116301
321
Release monitoring activated, incl. adhesive
labels
111157
100465
Right 110689 MGB-L1HE-ARA-R-110689
116303
312
Release monitoring activated, incl. adhesive
labels
111158 Le�t 110690 MGB-L1HE-ARA-L-110690
* The color can be selected using the lens set included. (Continued on next page)
Ordering table (continued)
1 23
30
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLe
Modules in the set Ordering data, set
Locking module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�act
ory
sett
ing)
Version/confguration schemeOrder no. separate module
S1H1
S2H2
S3H3
S4H4
Wiring diagram Order no./item
AR
111101
423
Incl. adhesive labels
–
wh wh
STOP
H
111739
–
Right 111020 MGB-L1H-ARA-R-111020
111103
423
Incl. adhesive labels
111741 Le�t 111022 MGB-L1H-ARA-L-111022
121208
321
Incl. adhesive labelsSTOP
*) *)
– I
100464
–
Right 121209 MGB-L1H-ARA-R-121209
121210
312
Incl. adhesive labels
106619 Le�t 121211 MGB-L1H-ARA-L-121211
* The color can be selected using the lens set included.
Ordering table (continued)
Locking sets MGB-L1-… (guard locking by spring �orce)with 3 controls or indicators
31
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MGB-L1...
MG
B-AR
MG
B-A
P
Block diagram and wiring diagram �or controls and indicators
Cable entry
Monitoring Outputs
Safety Inputs
H2 H3S2 S3
0V
UA
S1
SafetyOutputs
IMP1/IMP2 must bebridged (default)
Guard Locking
| |
Solenoid configurationsingle channel
(1x p-switching)
X3:3X2:3 X2:4
OI
X5:4 X2:2 X2:7 X3:2
X3:1
FI1A
X4:1
FI1B
X4:2
FO1A
X4:4
FO1B
X4:5
RST
X4:6
OT
X5:2
OL
X5:3 X2:1
OD
X5:1 X2:6
IMP1
X3:7
UA
X3:4
IMP2
X3:6
UB
X5:6
0V
X5:5
0V
X3:5
NC
X3:8
MGB
A
Cable entry
Monitoring Outputs
Safety Inputs
H2 H3S2 S3 H4S4UA
0V
SafetyOutputs
EnablingSwitch
IMP1/IMP2 must bebridged (default)
Guard Locking
| |
Solenoid configurationsingle channel
(1x p-switching)
FI1A
X4:1 X3:3 X2:5
OI
X5:4 X2:2X2:7 X3:2
X3:1
FI1B
X4:2
FO1A
X4:4
FO1B
X4:5
RST
X4:6
OT
X5:2
OL
X5:3
OD
X5:1
X7:5 X7:1 X7:2 X7:4 X7:3
ZSI1
X2:1
ZSI2
X2:4
ZSO2
X2:6
ZSO1
X2:3
IMP1
X3:7
IMP2
X3:6
0V
X5:5
0V
X3:5
NC
X3:8
UA
X3:4
UB
X5:6
MGB
B
Plug connector M23
H2 H3S3
0V
UA
S1
Monitoring OutputsSafety
OutputsGuard Locking
IMP1/IMP2 must bebridged (default)
Solenoid configurationsingle channel
(1x p-switching)
11
1813
17
16
RST
7
8
OT
10
14
159
OI
NC
3
4
FO1A
5
FO1B
UAUB
6
NC
2
19
0V
IMP1
1
12
FE
MGB
C
Plug connector M23
EnablingSwitch
SafetyOutputs Monitoring OutputsGuard Locking
H2 H3S2 S3 H4S4
UA
0V
MGB
X6:19
0V
UAUB
X6:6 X6:18 X6:3
X6:9
OI
X6:7X6:15 X6:17
X6:16
IMP1
X6:1
X6:4
FO1A
X6:5
FO1B
RST
X6:2
X6:12
FE
X6:8
OT
X6:10
ZSI1
X6:13
ZSI2
X6:14
ZSO2
X6:11
ZSO1
X7:5 X7:1 X7:2 X7:4 X7:3
D
(Continued on next page)
1 23
32
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLe
Block diagram and wiring diagrams �or controls and indicators(continued)
Plug connector RC26
Monitoring Outputs
NC
26
H2 H3S2 S3
0V
UA
S1
SafetyOutputs
Safety Inputs
Guard Locking
IMP1/IMP2 must bebridged (default)
Solenoid configurationsingle channel
(1x p-switching)
UAUB
1 20
24
15
IMP1
2
6
FO1A
7
FO1B
RST
16
9
OT
11
OI
3
0V
12
14
13
FI1A
4
FI1B
5
NC
17
19 21
22
8
OD
10
OL
NC
18
NC
23
NC
25
MGB
I
Plug connector M23
SafetyOutputs Monitoring OutputsGuard Locking
Safety Inputs S1 S2 S3H2 H3
UA
0V
MGB
13
UAUB
6 1811
17
16
IMP1
1
4
FO1A
5
FO1B
RST
7
8
OT
9
OI
19
0V
10
14
12
FE
15
FI1A
2
FI1B
3
H
Plug connector M23
SafetyOutputs
Monitoring OutputsGuard Locking
Safety Inputs
18
12
FE
H2 H3S2 S3
0V
UA
S1
UAUB
6 16
9
OI
14
IMP1
1
4
FO1A
5
FO1B
RST
7
8
OT
19
0V
10
11
13
FI1A
2
FI1B
3
15 17
MGB
G
Cable entry
S1 S2 S3H2 H3
SafetyOutputs
Safety Inputs
Monitoring Outputs
10
IMP1/IMP2 must bebridged (default)
Guard Locking
| |
Solenoid configurationsingle channel
(1x p-switching)0V
UA
FI1A
X4:1
FI1B
X4:2
RST
X4:6
FO1A
X4:4
FO1B
X4:5
OD
X5:1
OT
X5:2
OL
X5:3
OI
X5:4 X2:1 X2:7 X3:2
X2:4 X3:1 X3:3
X2:2
X2:3
IMP1
X3:7
UA
X3:4
IMP2
X3:6
UB
X5:6
0V
X5:5
0V
X3:5
NC
X3:8
X2:6
MGB
F
Cable entry
Monitoring Outputs
Safety Inputs
H2 H3S2 S3
0V
UA
S1
SafetyOutputs
IMP1/IMP2 must bebridged (default)
Guard Locking
| |
Solenoid configurationsingle channel
(1x p-switching)
X3:3X2:3 X2:4
OI
X5:4 X2:2 X2:7 X3:2
X3:1
FI1A
X4:1
FI1B
X4:2
FO1A
X4:4
FO1B
X4:5
RST
X4:6
OT
X5:2
OL
X5:3 X2:1
OD
X5:1 X2:6
IMP1
X3:7
UA
X3:4
IMP2
X3:6
UB
X5:6
0V
X5:5
0V
X3:5
NC
X3:8
MGB
E
Locking sets MGB-L1-… (guard locking by spring �orce)with 3 controls or indicators
33
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MGB-L1...
MG
B-AR
MG
B-A
P
1 23
34
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLe
Locking sets MGB-L1-… (guard locking by spring �orce)with 4 controls or indicators
Ordering table
� Can be connected in series with other AR devices (e.g. CES-AR, CET-AR and CTP-AR)
� With cable entry or plug connector � Integrated controls and indicators
Details
Release monitoring activatedWhen release monitoring is active, the system enters into a latching �ault when the escape release or auxiliary release is actuated.Emergency stop with monitoring contactAdditional normally open contact in the emer-gency stop, e.g. as monitoring contact �or the control system.Lens setThe color o� the pushbutton can be selected using the lens set 120344 included.Selector switch, illuminatedSelector switch with 2 positions (�orm V, 90°). The switch latches in both positions.
Further in�ormation
� Dimension drawings see p. 51 � Technical data see p. 50 � Accessories and spare parts see p. 63 � www.euchner.de
Modules in the set Ordering data, set
Locking module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�ac
tory
set
ting)
Version/confguration schemeOrder no. separate module
S1H1
S2H2
S3H3
S4H4
Wiring diagram Order no./item
AP
121812
4 321
Release monitoring activated, incl. adhesive
labels STOP
wh rd gn
A
111838
106051
Right
121813 MGB-L1HE-APA-R-121813
(Modules pre-assembled on mounting plates)
121814
3 412
Release monitoring activated, incl. adhesive
labels
111839 Le�t
121815 MGB-L1HE-APA-L-121815
(Modules pre-assembled on mounting plates)
AR
117228
4 321
STOP
gn wh bu
B
100464
–
Right 117229 MGB-L1H-ARA-R-117229
117230
4 321 106619 Le�t 117231
MGB-L1H-ARA-L-117231
* The color can be selected using the lens set included. (Continued on next page)
35
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MGB-L1...
MG
B-AR
MG
B-A
P
4 321
Modules in the set Ordering data, set
Locking module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�act
ory
sett
ing)
Version/confguration schemeOrder no. separate module
S1H1
S2H2
S3H3
S4H4
Wiring diagram Order no./item
AR
121404
4 321
STOP
*) *)
0 1
Form V90°
C
100464
–
Right 121405 MGB-L1H-ARA-R-121405
121406
4 321 106619 Le�t 121407
MGB-L1H-ARA-L-121407
119923
4 321
STOP
gn wh bu
D
100464
–
Right 119924 MGB-L1H-ARA-R-119924
119925
4312
106619 Le�t 119926 MGB-L1H-ARA-L-119926
* The color can be selected using the lens set included.
Ordering table (continued)
36
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLe
Block diagram and wiring diagrams �or controls and indicators
Locking sets MGB-L1-… (guard locking by spring �orce)with 4 controls or indicators
Plug connector M23
H2 H3
SafetyOutputs Monitoring Outputs
S2 S3
0V
UA
S1 H4
Guard Locking
S4
3
UAUB
6 1610
13 15
14
IMP1
1
4
FO1A
5
FO1B
RST
7
8
OT
9
OI
19
0V
2
11
12
FE
18
17
MGB
A
Cable entry
SafetyOutputs Monitoring Outputs
Safety Inputs
H2 H3S3
NC
X3:8
X2:6
S2 H4S4S1
IMP1/IMP2 must bebridged (default)
Guard Locking
| |
Solenoid configurationsingle channel
(1x p-switching)
UA
0V
X3:3
OI
X5:4 X3:2
X3:1
FI1A
X4:1
FI1B
X4:2
FO1A
X4:4
FO1B
X4:5
RST
X4:6
OT
X5:2
OL
X5:3
OD
X5:1 X2:7
X2:8
X2:5
X2:3 X2:4
X2:2X2:1
IMP1
X3:7
UA
X3:4
IMP2
X3:6
UB
X5:6
0V
X5:5
0V
X3:5
MGB
B
Cable entry
SafetyOutputs Monitoring Outputs
Safety Inputs
H3S3
0V
X3:5
NC
X3:8
H2S2
0V
UA
S1 S421
H4
IMP1/IMP2 must bebridged (default)
Guard Locking
| |
Solenoid configurationsingle channel
(1x p-switching)
X3:3
OI
X5:4 X3:2
FI1A
X4:1
FI1B
X4:2
FO1A
X4:4
FO1B
X4:5
RST
X4:6
OT
X5:2
OL
X5:3
OD
X5:1
X2:3 X2:4
X2:2 X2:7
X3:1
X2:1 X2:6 X2:5
X2:8
IMP1
X3:7
UA
X3:4
IMP2
X3:6
UB
X5:6
0V
X5:5
MGB
C
Plug connector RC26
Monitoring Outputs
NC
17
H2 H3S3
0V
UA
S2 H4S4S1
SafetyOutputs
Safety Inputs
Guard Locking
IMP1/IMP2 must bebridged (default)
Solenoid configurationsingle channel
(1x p-switching)
21
20
19
RST
16
9
OT
11
OI
12
15
1810
OL
22
2314
138
OD
NC
24
NC
25
NC
26
UAUB
1
IMP1
2
6
FO1A
7
FO1B
3
0V
FI1A
4
FI1B
5
MGB
D
37
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MGB-L1...
MG
B-AR
MG
B-A
P
4 321
38
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLe
Locking sets MGB-L2-… (guard locking by solenoid �orce)without control or indicator
Ordering table
� Can be connected in series with other AR devices (e.g. CES-AR, CET-AR and CTP-AR)
� With cable entry or plug connector
Further in�ormation
� Dimension drawings see p. 51 � Technical data see p. 50 � Accessories and spare parts see p. 63 � www.euchner.de
Modules in the set Ordering data, set
Locking module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�ac
tory
set
ting)
Version/confguration schemeOrder no. separate module
S1H1
S2H2
S3H3
S4H4
Wiring diagram Order no./item
AR
104303
– – – –
A
100464
100465
Right
105788 MGB-L2HE-AR-R-105788
–
105786 MGB-L2H-AR-R-105786
109776
B
109780 MGB-L2H-AR-R-109780
109777
106619 Le�t 109781 MGB-L2H-AR-L-109781
39
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MGB-L2...
MG
B-AR
MG
B-A
P
Block diagram
IMP1/IMP2 must bebridged (default)
SafetyOutputs Monitoring Outputs
Safety Inputs
Guard Locking
| |
Solenoid configurationsingle channel
(1x p-switching)
IMP1
X3:7
FO1B
X4:5
UA
X3:4
OI
X5:4
IMP2
X3:6
FI1A
X4:1
FI1B
X4:2
FO1A
X4:4
OD
X5:1
RST
X4:6
OT
X5:2
OL
X5:3
UB
X5:6
0V
X5:5
0V
X3:5
NC
X3:8
MGB
Cable entryA
SafetyOutputs
Safety Inputs
Monitoring OutputsGuard Locking
IMP1/IMP2 must bebridged (default)
Solenoid configurationsingle channel
(1x p-switching)
FI1A
2
FI1B
3
RST
7
4
FO1A
5
FO1B
11
OD
8
OT
10
OL
9
OI
UAUB
6
NC
13
19
0V
IMP1
1
12
FE
NC
14
NC
15
NC
16
NC
17
NC
18
MGB
Plug connector M23B
40
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLe
Locking sets MGB-L2-… (guard locking by solenoid �orce)with 2 controls or indicators
Ordering table
� Can be connected in series with other AR devices (e.g. CES-AR, CET-AR and CTP-AR)
� With cable entry or plug connector � Integrated controls and indicators
Lens setThe color o� the pushbutton can be selected using the lens set 120344 included.Adhesive labelsDevices with adhesive labels have pre-�ormed recesses. The adhesive labels enclosed (stan-dard size 12.5 x 27 mm) can be a�fxed in these recesses.
Further in�ormation
� Dimension drawings see p. 51 � Technical data see p. 50 � Accessories and spare parts see p. 63 � www.euchner.de
Details
Guard lock monitoring switched o��As the de�ault setting on delivery, the guard lock monitoring is switched o�� via the internal DIP switches with these evaluation modules. Consequently, the guard locking is suitable only �or process protection. Sa�ety outputs FO1A and FO1B do not depend on the state o� guard locking.
Notice: Devices a��ected are marked with this symbol.
Emergency stop with monitoring contactAdditional normally open contact in the emer-gency stop, e.g. as monitoring contact �or the control system.
Modules in the set Ordering data, set
Locking module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�ac
tory
set
ting)
Version/confguration schemeOrder no. separate module
S1H1
S2H2
S3H3
S4H4
Wiring diagram Order no./item
AR
121024
1 2
STOP
*)
– – A
100464
–
Right 121025 MGB-L2H-ARA-R-121025
Guard lock moni-toring switched
o��, incl. adhesive label
121028
2 1
106619 Le�t 121029 MGB-L2H-ARA-L-121029
Guard lock moni-toring switched
o��, incl. adhesive label
121064
23
–
*) *)
– B
100464
–
Right
121065 MGB-L2H-ARA-R-121065
100465 121066 MGB-L2HE-ARA-R-121066
121070
32 106619
–
Le�t
121071 MGB-L2H-ARA-L-121071
100465 121072 MGB-L2HE-ARA-L-121072
* The color can be selected using the lens set included. (Continued on next page)
41
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MGB-L2...
MG
B-AR
MG
B-A
P
1 2
Ordering table (continued)
Modules in the set Ordering data, set
Locking module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�act
ory
sett
ing)
Version/confguration schemeOrder no. separate module
S1H1
S2H2
S3H3
S4H4
Wiring diagram Order no./item
AR
121172
23
Incl. adhesive labels
–
*) *)
–
B
100464
–
Right 121173 MGB-L2H-ARA-R-121173
121174
32
Incl. adhesive labels
106619 Le�t 121175 MGB-L2H-ARA-L-121175
121111
32
Incl. adhesive labelsC
100464 Right 121112 MGB-L2H-ARA-R-121112
121113
32
Incl. adhesive labels
106619 Le�t 121114 MGB-L2H-ARA-L-121114
* The color can be selected using the lens set included.
42
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLe
Locking sets MGB-L2-… (guard locking by solenoid �orce)with 2 controls or indicators
Block diagram and wiring diagrams �or controls and indicators
Cable entry
Monitoring Outputs
Safety Inputs
H2S2
0V
UA
S1
SafetyOutputs
IMP1/IMP2 must bebridged (default)
Guard Locking
| |
Solenoid configurationsingle channel
(1x p-switching)
X2:3 X2:4
OI
X5:4 X2:2 X2:7
X3:1
FI1A
X4:1
FI1B
X4:2
FO1A
X4:4
FO1B
X4:5
RST
X4:6
OT
X5:2
OL
X5:3 X2:1
OD
X5:1 X2:6
IMP1
X3:7
UA
X3:4
IMP2
X3:6
UB
X5:6
0V
X5:5
0V
X3:5
NC
X3:8
MGB
A
Cable entry
Monitoring Outputs
Safety Inputs
H3S3
0V
UA
S2 H2
SafetyOutputs
IMP1/IMP2 must bebridged (default)
Guard Locking
| |
Solenoid configurationsingle channel
(1x p-switching)
X3:3
OI
X5:4 X3:2
X3:1
FI1A
X4:1
FI1B
X4:2
FO1A
X4:4
FO1B
X4:5
RST
X4:6
OT
X5:2
OL
X5:3 X2:7
OD
X5:1
IMP1
X3:7
UA
X3:4
IMP2
X3:6
UB
X5:6
0V
X5:5
0V
X3:5
NC
X3:8
MGB
B
Plug connector M23
Monitoring Outputs
H3S3
0V
UA
S2 H2
SafetyOutputs
Safety Inputs
Guard Locking
IMP1/IMP2 must bebridged (default)
Solenoid configurationsingle channel
(1x p-switching)
18
RST
7
10
OL
9
OI
15
16
178
OT
NC
11
NC
14
FI1A
2
FI1B
3
4
FO1A
5
FO1B
UAUB
6
NC
13
19
0V
IMP1
1
12
FE
MGB
C
43
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MGB-L2...
MG
B-AR
MG
B-A
P
1 2
44
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLe
Locking sets MGB-L2-… (guard locking by solenoid �orce)with 3 controls or indicators
Ordering table
� Can be connected in series with other AR devices (e.g. CES-AR, CET-AR and CTP-AR)
� With cable entry or plug connector � Integrated controls and indicators
Machine stopVersion as emergency stop but in gray/yellow, e.g. as machine stop. Important: Do not use as emergency stop!
Further in�ormation
� Dimension drawings see p. 51 � Technical data see p. 50 � Accessories and spare parts see p. 63 � www.euchner.de
Details
Emergency stop with monitoring contactAdditional normally open contact in the emer-gency stop, e.g. as monitoring contact �or the control system.Connection �or enabling switchThe devices have an M12 plug connector �or the direct connection o� an enabling switch (e.g. ZSA, order no. 110560).Lens setThe color o� the pushbutton can be selected using the lens set 120344 included.Adhesive labelsDevices with adhesive labels have pre-�ormed recesses. The adhesive labels enclosed (stan-dard size 12.5 x 27 mm) can be a�fxed in these recesses.
Modules in the set Ordering data, set
Locking module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�ac
tory
set
ting)
Version/confguration schemeOrder no. separate module
S1H1
S2H2
S3H3
S4H4
Wiring diagram Order no./item
AP
110544
423
Plug connector M12 �or enabling switch, incl.
adhesive labels–
wh ye bu
A
100464
–
Right 110548 MGB-L2H-APA-R-110548
110545
432
Plug connector M12 �or enabling switch, incl.
adhesive labels
106619 Le�t 110549 MGB-L2H-APA-L-110549
AR
121237
1 23
STOP
*) *)
– B
100464
–
Right
121238 MGB-L2H-ARA-R-121238
121244
1 23
100465 121239 MGB-L2HE-ARA-R-121239
106619
–
Le�t
121245 MGB-L2H-ARA-L-121245
100465 121246 MGB-L2HE-ARA-L-121246
* The color can be selected using the lens set included. (Continued on next page)
45
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MGB-L2...
MG
B-AR
MG
B-A
P
1 23
Ordering table (continued)
Modules in the set Ordering data, set
Locking module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�act
ory
sett
ing)
Version/confguration schemeOrder no. separate module
S1H1
S2H2
S3H3
S4H4
Wiring diagram Order no./item
AR
121257
1 23
Incl. adhesive labels STOP
*) *)
– B
100464
–
Right 121258 MGB-L2H-ARA-R-121258
121263
32 1
Incl. adhesive labels
106619 Le�t 121264 MGB-L2H-ARA-L-121264
110708
321
Incl. adhesive labels STOP
ye wh
– C
100464
–
Right 110615 MGB-L2H-ARA-R-110615
110709
312
Incl. adhesive labels
106619 Le�t 110616 MGB-L2H-ARA-L-110616
121190
321
Incl. adhesive labels STOP
*) *)
– D
100464
100465
Right 121191 MGB-L2HE-ARA-R-121191
121194
312
Incl. adhesive labels
106619 Le�t 121195 MGB-L2HE-ARA-L-121195
111923
321
gn rd
– E
100464
–
Right 111924 MGB-L2H-ARA-R-111924
111925
312 106619 Le�t 111926
MGB-L2H-ARA-L-111926
* The color can be selected using the lens set included.
46
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLe
Block diagram and wiring diagrams �or controls and indicators
Locking sets MGB-L2-… (guard locking by solenoid �orce)with 3 controls or indicators
Cable entry
Monitoring Outputs
Safety Inputs
H2 H3S2 S3 H4S4UA
0V
SafetyOutputs
EnablingSwitch
IMP1/IMP2 must bebridged (default)
Guard Locking
| |
Solenoid configurationsingle channel
(1x p-switching)
FI1A
X4:1 X3:3 X2:5
OI
X5:4 X2:2X2:7 X3:2
X3:1
FI1B
X4:2
FO1A
X4:4
FO1B
X4:5
RST
X4:6
OT
X5:2
OL
X5:3
OD
X5:1
X7:5 X7:1 X7:2 X7:4 X7:3
ZSI1
X2:1
ZSI2
X2:4
ZSO2
X2:6
ZSO1
X2:3
IMP1
X3:7
IMP2
X3:6
0V
X5:5
0V
X3:5
NC
X3:8
UA
X3:4
UB
X5:6
MGB
A
Cable entry
Monitoring Outputs
Safety Inputs
H2 H3S2 S3
0V
UA
S1
SafetyOutputs
IMP1/IMP2 must bebridged (default)
Guard Locking
| |
Solenoid configurationsingle channel
(1x p-switching)
X3:3X2:3 X2:4
OI
X5:4 X2:2 X2:7 X3:2
X3:1
FI1A
X4:1
FI1B
X4:2
FO1A
X4:4
FO1B
X4:5
RST
X4:6
OT
X5:2
OL
X5:3 X2:1
OD
X5:1 X2:6
IMP1
X3:7
UA
X3:4
IMP2
X3:6
UB
X5:6
0V
X5:5
0V
X3:5
NC
X3:8
MGB
B
Plug connector M23
SafetyOutputs Monitoring OutputsGuard Locking
Safety Inputs S1 S2 S3H2 H3
UA
0V
MGB
13
UAUB
6 1811
17
16
IMP1
1
4
FO1A
5
FO1B
RST
7
8
OT
9
OI
19
0V
10
14
12
FE
15
FI1A
2
FI1B
3
C
Plug connector M23
SafetyOutputs Monitoring OutputsGuard Locking
Safety Inputs S1 S2 S3H2 H3
UA
0V
MGB
13
UAUB
6 1812
17
16
IMP1
1
4
FO1A
5
FO1B
RST
7
8
OT
10
OI
19
0V
11
14
15
FI1A
2
FI1B
3
9
OL
D
Plug connector M23
Monitoring OutputsGuard Locking
Safety Inputs S1 H2 H3
0V
SafetyOutputs
13
UAUB
6 1811 17
IMP1
1
4
FO1A
5
FO1B
RST
7
8
OT
9
OI
19
0V
10
14
12
FE
FI1A
2
FI1B
3
15
OD
16
OL
MGB
E
47
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MGB-L2...
MG
B-AR
MG
B-A
P
1 23
48
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLe
Locking sets MGB-L2-… (guard locking by solenoid �orce)with 4 controls or indicators
Ordering table
� Can be connected in series with other AR devices (e.g. CES-AR, CET-AR and CTP-AR)
� With cable entry or plug connector � Integrated controls and indicators
Further in�ormation
� Dimension drawings see p. 51 � Technical data see p. 50 � Accessories and spare parts see p. 63 � www.euchner.de
Details
Lens setThe color o� the pushbutton can be selected using the lens set 120344 included.Adhesive labelsDevices with adhesive labels have pre-�ormed recesses. The adhesive labels enclosed (stan-dard size 12.5 x 27 mm) can be a�fxed in these recesses.Key-operated switch �orm VForm V, 40° angle o� rotation with 2 positions. The key latches in position 0 and can be removed in position 0.Selector switchSelector switch with 2 positions (�orm V, 90°). The switch latches in both positions.
Modules in the set Ordering data, set
Locking module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�ac
tory
set
ting)
Version/confguration schemeOrder no. separate module
S1H1
S2H2
S3H3
S4H4
Wiring diagram Order no./item
AP
120599
4 321
Incl. adhesive labelsIP54 STOP
*) *)
0 1
Form V 40°
A
111157
100465
Right 120600 MGB-L2HE-APA-R-120600
120601
3 412
Incl. adhesive labelsIP54
111158 Le�t 120602 MGB-L2HE-APA-L-120602
AR
121397
4 321
*) ye *)
0 1
Form V90°
B
100464
–
Right 121398 MGB-L2H-ARA-R-121398
121399
4 321 106619 Le�t 121400
MGB-L2H-ARA-L-121400
* The color can be selected using the lens set included.
49
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MGB-L2...
MG
B-AR
MG
B-A
P
Block diagram and wiring diagrams �or controls and indicators
4 321
Monitoring Outputs
12
FE
SafetyOutputs
Guard Locking
IMP1/IMP2 must bebridged (default)
Solenoid configurationsingle channel
(1x p-switching)
H2 H3S2 S3
0V
UA
S1 S4
3
1610
1315
RST
7
8
OT
9
OI
2
11 18
174
FO1A
5
FO1B
UAUB
6
NC
14
19
0V
IMP1
1
MGB
Plug connector M23A
Cable entry
Monitoring Outputs
Safety Inputs
H2 H3S3
0V
UA
S1 H1 S421
SafetyOutputs
IMP1/IMP2 must bebridged (default)
Guard Locking
| |
Solenoid configurationsingle channel
(1x p-switching)
X3:3X2:6
OI
X5:4 X2:2X3:2
X3:1
FI1A
X4:1
FI1B
X4:2
FO1A
X4:4
FO1B
X4:5
RST
X4:6
OT
X5:2
OL
X5:3 X2:1
OD
X5:1
IMP1
X3:7
UA
X3:4
IMP2
X3:6
UB
X5:6
0V
X5:5
0V
X3:5
NC
X3:8
MGB
B
50
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Technical dataParameter Value Unit
Housing material Fiber glass rein�orced plastic Die-cast zinc, nickel-plated
Stainless steel
Dimensions See dimension drawing
WeightLocking moduleHandle moduleEscape release
0.751.000.50
kg
Ambient temperature at UB = DC 24 V -20 … +55 °C
Degree o� protectionCover not populated/populated with push buttons/indicatorsCover populated with key-operated switch
IP65 IP54
Sa�ety class III
Degree o� contamination 3
Installation position Any
Locking �orce Fzh in accordance with GS-ET-19 2000 N
Connection 4 cable entries M20x1.5 or plug connector
Conductor cross-section (rigid/�exible)- With �errule according to DIN 46 228/1- With �errule with collar according to DIN 46228/1
0.13 … 1.5 (AWG 24 … AWG 16)0.25 … 1.5
0.25 … 0.75mm²
Operating voltage UB (reverse polarity protected, regulated, residual ripple < 5 %)
24 +10% / -15% (PELV) V DC
Auxiliary voltage UA (reverse polarity protected, regulated, residual ripple < 5 %)
24 +10% / -15% (PELV) V DC
Current consumption IUB (no load on any outputs) 80 mA
Current consumption IUA
- With energized guard locking solenoid and unloaded outputs OI, OL, OT and OD
- Push button S (unloaded, per LED)350
5
mA
External �use See operating instructions
Sa�ety outputs FO1A/FO1B Semiconductor outputs, p-switching, short circuit-proo�
Test duration a�ter power on AR < 1000 / AP < 300 μs
Output voltage UFO1A / UFO1B 1)
HIGH UFO1A / UFO1B UB-2V … UB
LOW UFO1A / UFO1B 0 … 1 V DC
Switching current per sa�ety output 1 … 200 mA
Utilization category according to EN IEC 60947-5-2 DC-13 24 V 200 mA Caution: outputs must be protected with a �ree-wheeling diode in case o� inductive loads.
Monitoring outputs- Output voltage 1)
- Max. load
p-switching, short circuit-proo�UA - 2V … UA
Max. 50 mA
Rated insulation voltage Ui 30 V
Rated impulse withstand voltage Uimp 1.5 kV
Resilience to vibration In acc. with EN IEC 60947-5-3
Switching �requency 0.25 Hz
EMC protection requirements In acc. with EN IEC 60947-5-3
Reliability values according to EN ISO 13849-1
Category 4
Per�ormance Level PL e
PFHd 3.1 x 10 -9 / h 2)
Mission time 20 years
Controls and indicators
Operating voltage 5 … 24 V
Operating current 1 … 100 mA
Breaking capacity max. 250 mW
Power supply LED 24 V DC1) Values at a switching current o� 50 mA without taking into account the cable lengths.2) Applying the limit value �rom EN ISO 13849-1:2008, section 4.5.2 (MTTFd = max. 100 years), the employers’ liability insurance association certifes a PFHd o� max. 2.47 x 10-8.
51
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MG
B-AR
MG
B-A
P
Dimension drawings11
111
4
OPEN
CLO
SED
1540 40
113,5 104
155,3 1304
8340
<51>
62,5
19,2 M20x1,5 (4x)
289,3
10 -
45,1
4033
,5
47,560
19
min. 6
37,5
S1 S2
4S 3S
A
max. 10
3021
106
111
114
OPEN
CLO
SED
1540 40
113,5 104
155,3 1304
8340
5162
,519
,2
M20x1,5 (4x)
289,3
106
� MGB-… without additional controls and indicators
� MGB-… with additional controls and indicators
View o� connection side
� Plug connector M12
47,5
13 M12x1
12
1 2
3
4
567
8
9 10
11
� Plug connector M23
47,5
19,5
M23x1
121
2
3
45
67
8
9
10
1118
13
1415
16
1719
View o� connection side
� Plug connector RC26
47,533
M27x1
12
3View o� connection side
Cont
rols
� Dimensions with plug connector M23 and automatically extending lockout mechanism (optional)
Detail A
Padlock
Lockout mechanism
52
Safety System MGB-...-AP.../MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Drilling pattern
7,5
6,5
86,5
15,4
15
73,5
6,3
6,2
89
,4
245
10
46
108
9,4
77
,5
92
,5
16,5
14,5
Evaluation module Handle module Escape release
53
Safety System MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MG
B-AR
Interlocking sets MGB-L0C-AR... (without guard locking) 54
with 6 controls and indicators 54
Locking sets MGB-L1C-AR... (guard locking by spring �orce) 56
with 6 controls and indicators 56
Locking sets MGB-L2C-AR... (guard locking by solenoid �orce) 58
with 6 controls and indicators 58
Technical data 60
Dimension drawings 61
Complete sets system �amily MGB-AR with control module MGB-C
� Interlocking or guard locking with handle module � With pushbuttons and emergency stop � With plug connectors
54
Safety System MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLeAR
Ordering table
� With control module MGB-C � Can be connected in series with other AR devices (e.g. CES-AR, CET-AR and CTP-AR)
� With plug connector
Further in�ormation
� Dimension drawings see p. 61 � Technical data see p. 60 � Accessories and spare parts see p. 63 � www.euchner.de
Interlocking sets MGB-L0C-AR... with 6 controls or indicators
Modules in the set Ordering data, set
Locking module with control module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�ac
tory
set
ting)
Version/ confguration scheme
Order no. separate module
S10H10
S11H11
S12H12
S13H13
S14H14
S15H15
Wiring diagram Order no./item
AR
110259
10
15
1211
14 13
Incl. adhesive labels
wh wh gn
STOP
rd bu
A
111157
–
Right 110255 MGB-L0HC-ARA-R-110255
110260
10
15
1211
14 13
Incl. adhesive labels
111158 Le�t 110256 MGB-L0HC-ARA-L-110256
Details
Adhesive labelsDevices with adhesive labels have pre-�ormed recesses. The adhesive labels enclosed (stan-dard size 12.5 x 27 mm) can be a�fxed in these recesses.Emergency stop with monitoring contactAdditional normally open contact in the emer-gency stop, e.g. as monitoring contact �or the control system.
55
Safety System MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MG
B-AR
MGB-L0C
Block diagram
SafetyOutputs Monitoring Outputs
Safety Inputs
23
22
H10 H15S10 S15
0V
UA
S13 H11S11 H12 H14
UAUB
1 20
17
18
NC
2
6
FO1A
7
FO1B
RST
16
9
OT
11
OI
3
0V
12
15
24
FI1A
4
FI1B
5
19
2114
138
OD
NC
26 25
MGB
NC
10
Plug connector RC26A
56
Safety System MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLeAR
Locking sets MGB-L1C-AR... (guard locking by spring �orce)with 6 controls or indicators
Ordering table
� With control module MGB-C � Can be connected in series with other AR devices (e.g. CES-AR, CET-AR and CTP-AR)
� With plug connector
Further in�ormation
� Dimension drawings see p. 61 � Technical data see p. 60 � Accessories and spare parts see p. 63 � www.euchner.de
Modules in the set Ordering data, set
Locking module with control module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�ac
tory
set
ting)
Version/ confguration scheme
Order no. separate module
S10H10
S11H11
S12H12
S13H13
S14H14
S15H15
Wiring diagram Order no./item
AR
109798
10
15
1211
14 13
Incl. adhesive labels
wh wh gn
STOP
rd bu
A
111157
–
Right 109806 MGB-L1HC-ARA-R-109806
109799
10
15
1211
14 13
Incl. adhesive labels
111158 Le�t 109807 MGB-L1HC-ARA-L-109807
Details
Adhesive labelsDevices with adhesive labels have pre-�ormed recesses. The adhesive labels enclosed (stan-dard size 12.5 x 27 mm) can be a�fxed in these recesses.Emergency stop with monitoring contactAdditional normally open contact in the emer-gency stop, e.g. as monitoring contact �or the control system.
57
Safety System MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MG
B-AR
MGB-L1C
Block diagram
SafetyOutputs Monitoring OutputsGuard Locking
Safety Inputs
23
22
H10 H15S10 S15
0V
UA
S13 H11S11 H12 H14
UAUB
1 20
17
18
IMP1
2
6
FO1A
7
FO1B
RST
16
9
OT
11
OI
3
0V
12
15
24
FI1A
4
FI1B
5
10
OL
19
2114
138
OD
NC
26 25
MGB
Plug connector RC26A
58
Safety System MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Cat.4PLeAR
Locking sets MGB-L2C-AR... (guard locking by solenoid �orce)with 6 controls or indicators
Ordering table
� With control module MGB-C � Can be connected in series with other AR devices (e.g. CES-AR, CET-AR and CTP-AR)
� With plug connector
Further in�ormation
� Dimension drawings see p. 61 � Technical data see p. 60 � Accessories and spare parts see p. 63 � www.euchner.de
Modules in the set Ordering data, set
Locking module with control module
Han
dle
mod
ule
Ord
er n
o. s
epar
ate
mod
ule
Esca
pe r
elea
se
Ord
er n
o. s
epar
ate
mod
ule
Doo
r hi
nge
(�ac
tory
set
ting)
Version/ confguration scheme
Order no. separate module
S10H10
S11H11
S12H12
S13H13
S14H14
S15H15
Wiring diagram Order no./item
AR
112529
10
15
1211
14 13
Incl. adhesive labels
wh wh gn
STOP
rd bu
A
111157
–
Right 112531 MGB-L2HC-ARA-R-112531
112530
10
15
1211
14 13
Incl. adhesive labels
111158 Le�t 112532 MGB-L2HC-ARA-L-112532
Details
Adhesive labelsDevices with adhesive labels have pre-�ormed recesses. The adhesive labels enclosed (stan-dard size 12.5 x 27 mm) can be a�fxed in these recesses.Emergency stop with monitoring contactAdditional normally open contact in the emer-gency stop, e.g. as monitoring contact �or the control system.
59
Safety System MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MG
B-AR
MGB-L2C
Block diagram
SafetyOutputs Monitoring OutputsGuard Locking
Safety Inputs
23
22
H10 H15S10 S15
0V
UA
S13 H11S11 H12 H14
UAUB
1 20
17
18
IMP1
2
6
FO1A
7
FO1B
RST
16
9
OT
11
OI
3
0V
12
15
24
FI1A
4
FI1B
5
10
OL
19
2114
138
OD
NC
26 25
MGB
Plug connector RC26A
60
Safety System MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Technical dataParameter Value Unit
Housing material Fiber glass rein�orced plastic Die-cast zinc, nickel-plated
Stainless steel
Dimensions See dimension drawing
WeightLocking moduleHandle moduleEscape release
0.751.000.50
kg
Ambient temperature at UB = DC 24 V -20 … +55 °C
Degree o� protectionCover not populated/populated with push buttons/indicatorsCover populated with key-operated switch
IP65 IP54
Sa�ety class III
Degree o� contamination 3
Installation position Any
Locking �orce Fzh in accordance with GS-ET-19 2000 N
Connection 4 cable entries M20x1.5 or plug connector
Conductor cross-section (rigid/�exible)- With �errule according to DIN 46 228/1- With �errule with collar according to DIN 46228/1
0.13 … 1.5 (AWG 24 … AWG 16)0.25 … 1.5
0.25 … 0.75mm²
Operating voltage UB (reverse polarity protected, regulated, residual ripple < 5 %)
24 +10% / -15% (PELV) V DC
Auxiliary voltage UA (reverse polarity protected, regulated, residual ripple < 5 %)
24 +10% / -15% (PELV) V DC
Current consumption IUB (no load on any outputs) 80 mA
Current consumption IUA
- With energized guard locking solenoid and unloaded outputs OI, OL, OT and OD
- Push button S (unloaded, per LED)350
5
mA
External �use See operating instructions
Sa�ety outputs FO1A/FO1B Semiconductor outputs, p-switching, short circuit-proo�
Test duration a�ter power on AR < 1000 / AP < 300 μs
Output voltage UFO1A / UFO1B 1)
HIGH UFO1A / UFO1B UB-2V … UB
LOW UFO1A / UFO1B 0 … 1 V DC
Switching current per sa�ety output 1 … 200 mA
Utilization category according to EN IEC 60947-5-2 DC-13 24 V 200 mA Caution: outputs must be protected with a �ree-wheeling diode in case o� inductive loads.
Monitoring outputs- Output voltage 1)
- Max. load
p-switching, short circuit-proo�UA - 2V … UA
Max. 50 mA
Rated insulation voltage Ui 30 V
Rated impulse withstand voltage Uimp 1.5 kV
Resilience to vibration In acc. with EN IEC 60947-5-3
Switching �requency 0.25 Hz
EMC protection requirements In acc. with EN IEC 60947-5-3
Reliability values according to EN ISO 13849-1
Category 4
Per�ormance Level PL e
PFHd 3.1 x 10 -9 / h 2)
Mission time 20 years
Controls and indicators
Operating voltage 5 … 24 V
Operating current 1 … 100 mA
Breaking capacity max. 250 mW
Power supply LED 24 V DC1) Values at a switching current o� 50 mA without taking into account the cable lengths.2) Applying the limit value �rom EN ISO 13849-1:2008, section 4.5.2 (MTTFd = max. 100 years), the employers’ liability insurance association certifes a PFHd o� max. 2.47 x 10-8.
61
Safety System MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
MG
B-AR
Dimension drawings � MGB-L.HC-AR
12
3
Plug connector RC26
View o� connection side
Detail A
Drilling pattern
62
Safety System MGB-...-AR...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
63
Accessories and Spare Parts MGB-...-AR.../-AP...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Accessories and spare parts �or all MGB �amilies
� Plug connectors and cables � Emergency unlocking �or auxiliary release � Adhesive labels � Mounting plates � Extended axes
Handle module MGB-H-... 64 - 66
Escape release MGB-E... 68
Emergency unlocking �or auxiliary release/adhesive labels 69
Lens sets 70
Mounting plates �or modules MGB-...-AR and MGB-...-AP 71 - 72
Plug connectors/ connection cables 73 - 76
Control modules MGB-C 77 - 83
Dimension drawing and confguration example 79
Overview controls and indicators 80
Combination options 81
Spare parts and accessories 82
Technical data 83
64
Accessories and Spare Parts MGB-...-AR.../-AP...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
111
114
OPEN
CLO
SED
1540 40
155,3 1304
4051
62,5 M20x1,5 (4x)
289,3
Dimension drawing (diagram shows door hinged on the right)
� Intelligent bolt tongue with transponder � Fold-out lockout mechanism � Door handle
Bolt tongueThe bolt tongue is reliably detected by tran-sponderas soon as it is inserted in the evaluation module.
Lockout mechanism (�old-out)For cleaning and service on the machine the bolt tongue can be locked with max. 3 padlocks.The lockout mechanism is simply �olded out and prevents the operation o� the handle.
Door handleThe MGB has a robust door handle that can be rotated in 90° steps to suit all installations.The actuating direction can be changed very easily �or doors hinged on the le�t or right.
Door knobAs an alternative to the door handle the handle module can also be equipped with a door knob.
Handle module MGB-H-... (�rom V3.0.0)with �old-out lockout mechanism
Handle module MGB-H-... (�rom V3.0.0)
1
2
3
4
Scope o� delivery:1 Door handle2 Locking pins �or housing cover and handle adjustment3 Lockout mechanism4 Bolt tongue
Lockout mechanism
55,6
56
8,4
48,
2
M6
Door knob
65
Accessories and Spare Parts MGB-...-AR.../-AP...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Ordering table handle module �rom V3.0.0Series Version Order no./item
MGB-H...Handle module right
With door handle and �old-out lockout mechanism, black housing with red cover
100464 MGB-H-AA1A1-R-100464
With door handle and �old-out lockout mechanism, can be locked using escape release, black hous-
ing with red cover
114655 MGB-H-AA1B1-R-114655
With door knob and �old-out lockout mechanism, black housing with red cover
113201 MGB-H-AA1A7-R-113201
MGB-H...Handle module le�t
With door handle and �old-out lockout mechanism, black housing with red cover
106619 MGB-H-AA1A1-L-106619
With door handle and �old-out lockout mechanism, can be locked using escape release, black hous-
ing with red cover
114656 MGB-H-AA1B1-L-114656
With door knob and �old-out lockout mechanism, black housing with red cover
121478 MGB-H-AA1A7-L-121478
Door handleAluminum, silver anodized From MGB-H V3.0.0 123926
MGB-A-DOORHANDLE-S2-123926
Door knobAluminum, silver anodized From MGB-H V3.0.0 124030
MGB-A-DOORKNOB-S2-124030
Ordering table accessories �or handle module up to V2.0.0Series Version Order no./item
Door handleAluminum, silver anodized Up to MGB-H V2.0.0 110277
MGB-A-DOORHANDLE-S-110277
Door knobAluminum, silver anodized Up to MGB-H V2.0.0 111460
MGB-A-DOORKNOB-111460
66
Accessories and Spare Parts MGB-...-AR.../-AP...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
111
114
OPEN
CLO
SED
1540 40
155,3 130 37,54
4051
62,5 M20x1,5 (4x)
289,3
32,6
2,5
min. 6
37,5
max. 10
3021
Dimension drawing (diagram shows door hinged on the right)
� Intelligent bolt tongue with transponder � Fold-out lockout mechanism (as on standard version)
� Second automatically extending lock-out mechanism
� Door handle
Bolt tongueThe bolt tongue is reliably detected by transpon-der as soon as it is inserted in the evaluation module.
Lockout mechanism (automatically extend-ing and �old-out)For cleaning and service on the machine the bolt tongue can be locked with max. 3 padlocks.The lockout mechanism extends automatically on the actuation o� the handle and prevents the operation o� the handle in the sa�e state. In addi-tion, the �old-out lockout mechanism can be used.
Door handleThe MGB has a robust door handle that can be rotated in 90° steps to suit all installations.The actuating direction can be changed very easily �or doors hinged on the le�t or right.
Door knobAs an alternative to the door handle the handle module can also be equipped with a door knob.
Handle module MGB-H-... (�rom V3.0.0)with automatically extending lockout mechanism
Handle module MGB-H... with automatically extending lockout mechanism (�rom V3.0.0)
1
2
3
4
3
Scope o� delivery:1 Door handle2 Locking pins �or housing cover and handle adjustment3 Lockout mechanism4 Bolt tongue
Lockout mechanism
AAutomatically extending lockout mechanism
55,6
56
8,4
48,
2
M6
Alternative door knob(not included)
Detail A
Padlock
67
Accessories and Spare Parts MGB-...-AR.../-AP...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Series Version Order no./item
MGB-H...Handle module right
With �old-out and also second automatically ex-tending lockout mechanism, black housing with red
cover
111157 MGB-H-AA1A3-R-111157
With door handle and �old-out lockout mechanism, can be locked using escape release, black hous-
ing with red cover
116813 MGB-H-AA1B2-R-116813
MGB-H...Handle module le�t
With �old-out and also second automatically ex-tending lockout mechanism, black housing with red
cover
111158 MGB-H-AA1A3-L-111158
With door handle and �old-out lockout mechanism, can be locked using escape release, black hous-
ing with red cover
116814 MGB-H-AA1B2-L-116814
Door handleAluminum, silver anodized From MGB-H V3.0.0 123926
MGB-A-DOORHANDLE-S2-123926
Door knobAluminum, silver anodized From MGB-H V3.0.0 124030
MGB-A-DOORKNOB-S2-124030
Ordering table
68
Accessories and Spare Parts MGB-...-AR.../-AP...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
111
114
OPEN
CLO
SED
1540 40
89,4
113,5 104
155,3 1304
8340
5162
,519
,2
M20x1,5 (4x)
289,3
106
Dimension drawing (diagram shows door hinged on the right)
� Door handle red
Escape releaseThe sa�ety system MGB can be equipped with an escape release module. The escape release enables people shut in to open the guard locked door �rom the danger area. It is only necessary to actuate the door handle.The actuating direction automatically adapts to the actuating direction o� the handle module and does not need to be changed.The actuation axis supplied is suitable �or profles up to 40 mm.
Extended actuation axisOptionally, a 250-mm long actuation axis (instead o� 110 mm) can be ordered �or thicker doors or profles > 40 mm.The axis can be shortened to the required dimension.
Escape release module MGB-E...
Escape release module MGB-E...
1 2 3 4 5
Scope o� delivery:1 Door handle or door knob2 Setscrew3 Cover4 Protective sleeve, 52 mm long5 Actuation axis, 118 mm long , square 8x8 mm
Series / designation Version Order no./item
MGB-E...Escape release
With red handle, 110 mm long 100465 MGB-E-A-100465
With red knob 110 mm long 117126 MGB-E-A7-117126
Extended actuation axis 250 mm long, square 8 x 8 mm(with protective sleeve, 182 mm long)
106761 MGB-A-ESCAPERELEASESHAFT 250
Escape release MGB-E-A-100465 pre-assembled on mounting plate With red handle, 118 mm long 106051
MGB-E-A2-106051
Door handle Aluminum, red stove enameled 110276 MGB-A-DOORHANDLE-R-110276
Door knob Aluminum, red stove enameled 114904 MGB-A-DOORKNOB-114904
Ordering table
5655,6
54,5
8,4
M6
Alternative door knob(not included)
69
Accessories and Spare Parts MGB-...-AR.../-AP...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
� Emergency unlocking
Emergency unlocking �or auxiliary release/adhesive labels
Dimension drawing
Emergency unlocking MGB-A...
FunctionThe MGB can be unlocked manually using the emergency unlocking. The rotary knob is pushed and then turned by 90° to unlock. The snap-in bolt engages in the hole on the �ange. To release the emergency unlocking, push the snap-in bolt inward and simultaneously turn the rotary knob back to its initial position. The emergency unlock-ing can be sealed in �ree position.
16
37,5
2
25,916,9
14,6
21
Hole �or sealing the emer-gency unlocking
Rotary knob
Snap-in bolt
Flange
Flange mounting
Driver
Series / designation Usage/color Order no./item
Emergency unlockingsealable
For auxiliary release evaluation modules MGB
112989 MGB-A-EMERGENCYRELEASE-112989
Lead seal kit For emergency unlocking 87256 Lead seal kit C1937
Adhesive labelssilver, blank
(packaging unit 10 pcs.)For evaluation modules MGB 114529
MGB-A-PLATESET-NN01-114529
Ordering table
70
Accessories and Spare Parts MGB-...-AR.../-AP...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Series / designation Usage/color Order no./item
Lens set3 pcs.
1 x GN 1 x YE 126158 MGB-A-LENSSET-SY03-1261581 x WH
Lens sets6 pcs.
2 x WH / 1 x BU / 1 x YE / 1 x GN / 1 x RD 120344 MGB-A-LENSSET-0001-120344
1 x WH / 1 x BU / 1 x YE / 1 x GN / 1 x RD / 1 x BK 120378 MGB-A-LENSSET-0002-120378
1 x WH 1 x WH
120377 MGB-A-LENSSET-SY01-1203771 x GN 1 x WH
1 x WH 1 x WH
Lens set15 pcs.
1 x WH 4 x BK
125359 MGB-A-LENSSET-SY02-125359
1 x WH 1 x WH
2 x WH 2 x WH
1 x WH OK 1 x WH
1 x WH 1 x WH
Ordering table
Lens sets
Lens set
71
Accessories and Spare Parts MGB-...-AR.../-AP...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
� Easy and quick mounting (only two screws required)
� Quick module replacement � Robust stainless steel plate � Suitable �or doors hinged on the right or le�t
Mounting plate �or evaluation moduleSuitable �or all interlocking or locking modules in the system �amilies AR and AP. Two screws are su�fcient �or �astening the mounting plates. Important: Only use i� the handle module is also �astened to a mounting plate.
Mounting plate �or evaluation module
Mounting plates �or modules MGB-...-AR... and MGB-...-AP...
Series / designation Version Order no./item
Mounting plate �or evaluation module Suitable �or all MGB-L.-AR.-... and MGB-L.-AP.-... 109490 MGB-A-MOUNTINGPLATE-L-109490
Mounting plate �or handle module Suitable �or all MGB handle modules 109491 MGB-A-MOUNTINGPLATE-H-109491
Mounting plate �or escape release Suitable �or all MGB escape releases 109492 MGB-A-MOUNTINGPLATE-E-109492
Mounting plate �or evaluation module-control module combination
Suitable �or all MGB-L.-AR.-... and MGB-L.-AP.-... in combination with a control module MGB-C...
110072 MGB-A-MOUNTINGPLATE-LC-110072
Ordering table
4
86,0
5
46
35
10
35
15
3011
0
6,5
170
20,54
17,5
135
17,5
155
M6
(4x)
4
10
89,4 11
0
12
30
17,5
(4x)
12,5
170
17,5
135
1 7,5
32
130,5
15 25
6,5
M6 16
Mounting plate �or handle modules
Mounting plate �or handle moduleSuitable �or all MGB handle modules. Two screws are su�fcient �or �astening the mounting plates. Important: Only use i� the evaluation module is also �astened to a mounting plate.
72
Accessories and Spare Parts MGB-...-AR.../-AP...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
20
10
1289
,4
86,5
6,5
(4x)
170
7,5
32
135
43,5
83
17,5
68
17,5
3
113,5
20
M6
19,5
4
4
A-A 1 : 1
6,6
(4x)
90°
158,
675
20,5
155
22,5
113,9
85
86,0
5
254
35
46
10
15
44
15
294
(4x)
2020
M6
10
110
A
A
Mounting plate �or escape release
Mounting plate �or evaluation module-control module combination
Mounting plate �or escape releaseSuitable �or all MGB escape releases. Two screws are su�fcient �or �astening the mounting plates. Important: Pay attention to length o� the escape release axis! You may need the longer axis (order no. 106761, see 68).
Mounting plate �or evaluation module-con-trol module combinationSuitable �or all MGB combinations, comprising an evaluation module and a control module. Important: Only use i� the handle module is also �astened to a mounting plate.
73
Accessories and Spare Parts MGB-...-AR.../-AP...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
� Cable optional � Halogen-�ree cable optional
Crimp contactsWith 16 crimp pins �or conductor cross-sec-tion 0.38 - 0.5 mm² and 3 pins �or conductor cross-section 0.75 - 1.0 mm² �or control o� the guard locking solenoid.
PUR cable (optional)Cable sleeve PUR, color black, conductor cross-section 0.5 mm² or 1.0 mm² (suitable �or drag chain).Depending on the cable version, either color-cod-ed or with separately numbered, black cores.
PUR cable, halogen-�ree (optional)Cable sleeve PUR, color black, halogen-�ree, silicone-�ree. Reduction o� toxic gases and smoke in case o� fre (suitable �or drag chain). Conductor cross-section 0.5 mm² or 1.0 mm².Cores color-coded.
Plug connector RC18
18
19
15
1211
9
5
4
3
2
1
17
1614
13
6
10
8
7
SW20M
20x1
,5
52
59
Ø26
Plug connector RC18 (M23)19-pin
Inserted With screen bonding clamp
View o� connection side, socket
Dimension drawing
Ordering tableDesignation Version Order no./itemCable gland
M20 x 1.5Material plastic
Cable diameter 6 - 12 mm086223
EKPM20/06
Plug connector RC18 (M23)19-pin
EF-C1825Female plug
(Crimp contacts included)
077025 RC18EF-C1825
Replacement pin crimp contactsConductor cross-section
16 x 0.38 - 0.5 mm2
3 x 0.75 - 1 mm2
094310 Pin crimp contact RCM-C1825
Built-in connector RC18 (M23)19-pin
120403 MGB-A-PLUGCONNECTOR-RC18-1204035
M23
x1
M20
x1,5
20,4 250 3 SW 24
7
8
9 16
15
65
144
3
2
13
1
1918
1211
10 17
Built-in connector RC18 (M23)19-pin
Dimension drawing
View o� connection side
� M20 x 1.5 � Material plastic � Cable diameter 6 - 12 mm
Cable gland
SW24
11
20 x
1,5
Cable gland EKPM20/06Plastic
Dimension drawing
74
Accessories and Spare Parts MGB-...-AR.../-AP...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Ordering tableDesignation Cable length L [m] Order no./item
Connection cable PUR with plug connector M23
18-core + PE, socketCores color-coded
1.5 092761 C-M23F19-19XDIFPU01,5-MA-092761
3 092816 C-M23F19-19XDIFPU03,0-MA-092816
6 077014 C-M23F19-19XDIFPU06,0-MA-077014
8 077015 C-M23F19-19XDIFPU08,0-MA-077015
10 092898 C-M23F19-19XDIFPU10,0-MA-092898
15 077016 C-M23F19-19XDIFPU15,0-MA-077016
20 092726 C-M23F19-19XDIFPU20,0-MA-092726
25 092727 C-M23F19-19XDIFPU25,0-MA-092727
30 095993 C-M23F19-19XDIFPU30,0-MA-095993
40 102490 C-M23F19-19XDIFPU40,0-MA-102490
18
19
15
1211
9
5
4
3
2
1
17
1614
13
6
10
8
7
SW20
Ø26
71
78
Ø11
,6±0
,3
Connection cable PUR with plug connector M2318-core + PE, color coded
Inserted With screen bonding clamp
View o� connection side, socket
Assignment o� connection cable with plug connector M23
Pin Conductor coloring Conductor cross-section [mm²] Pin Conductor coloring Conductor cross-section
[mm²]1 VT 0.5 11 BK 0.52 RD 0.5 12 GN/YE 1.0
3 GY 0.5 13 PK 0.54 RD/BU 0.5 14 BN/GY 0.55 GN 0.5 15 BN/YE 0.56 BU 1.0 16 BN/GN 0.57 GY/PK 0.5 17 WH 0.58 GN/WH 0.5 18 YE 0.5
9 YE/WH 0.5 19 BN 1.010 GY/WH 0.5
Dimension drawing
75
Accessories and Spare Parts MGB-...-AR.../-AP...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Connection cables with plug connector M23
Ordering tableDesignation Cable length L [m] Order no./item
Connection cable PUR with plug connector M23
19-core, socketIndividual cores numbered, black, numbering corre-
sponds to the pin numberConductor cross-section as �or connection cable above
1.5 110301 C-M23F19-PU01,5-MA-110301
3 110302 C-M23F19-PU03,0-MA-110302
6 110303 C-M23F19-PU06,0-MA-110303
10 110304 C-M23F19-PU10,0-MA-110304
15 110305 C-M23F19-PU15,0-MA-110305
20 110306 C-M23F19-PU20,0-MA-110306
25 110307 C-M23F19-PU25,0-MA-110307
30 122434 C-M23F19-PU30,0-MA-122434
40 122435 C-M23F19-PU40,0-MA-122435
Connection cable PUR with plug connector M2319-core, numbered
Dimension drawing
View o� connection side, socket
71
26
L
SW20
11,4
0,
3
50 -5
12
4
2
5
1
3
67
8
9
10
1118
13
14 15
16
1719
76
Accessories and Spare Parts MGB-...-AR.../-AP...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Connection cables with plug connector RC26
Connection cable PUR with plug connector RC2626-core + PE, numbered
Conductor cross-section o� connection cable with plug connector RC26
Pin Conductor cross-section [mm²] Pin Conductor cross-section
[mm²] Pin Conductor cross-section [mm²]
1 1.0 10 0.5 19 0.52 1.0 11 0.5 20 0.53 1.0 12 0.5 21 0.54 0.5 13 0.5 22 0.55 0.5 14 0.5 23 0.56 0.5 15 0.5 24 0.57 0.5 16 0.5 25 0.58 0.5 17 0.5 26 0.59 0.5 18 0.5
Dimension drawing
Ordering tableDesignation Cable length L [m] Order no./item
Connection cable TPE-U with plug connector RC26
26-core, socketIndividual cores numbered, black, numbering corre-
sponds to the pin number
1.1 114976 C-M27F26-PU01,1-MA-114976
2 111997 C-M27F26-PU02,0-MA-111997
5 111998 C-M27F26-PU05,0-MA-111998
10 111999 C-M27F26-PU10,0-MA-111999
20 112912 C-M27F26-PU20,0-MA-112912
35 123829 C-M27F26-PU35,0-MA-123829
50 123877 C-M27F26-PU50,0-MA-123877
58,8
30
L
M27
x1
SW24 SW24
11,5 50 -5
26
2524
23
22
2120
19
18
1716
1514
13
12
11
109
87
6
5
4
32
1
View o� connection side, socket
77
Accessories and Spare Parts MGB-...-AR.../-AP...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Expand your options - the control module �or the MGB
� Space �or up to 6 controls and indicators � Ideal expansion solution �or the MGB system � A large amount o� design �exibility
In the control module it is possible to integrate controls such as push buttons, emergency stop, key-operated switches, selector switches or even indicators as required. In this way a complete �unctional control panel can be built up.
Even the MGB basic system comprising handle module and interlocking/locking module includes numerous �unctions. And i� requirements grow, the MGB system simply grows with them with the aid o� the control module.
Furthermore, the control module �orms an attractive unit together with the MGB. An elegant alternative to the gray switch boxes that were common in the past.
Your advantages
� Simple expansion o� the MGB system � Flexible confguration with standard components � Attractive solution �rom one mold � Functional unit, all control �unctions in one place � Alternative to previous control terminals
(Confguration example)
78
Accessories and Spare Parts MGB-...-AR.../-AP...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Control modules MGB-C...
Ordering table
� Integrated controls and indicators
Version/confguration scheme S10H10
S11H11
S12H12
S13H13
S14H14
S15H15
Order no./item
Empty housing incl. cover and 2 dummy plugs
– – – – – – 109219 MGB-C-000000-A1-109219
Empty housing incl. cover with holes, 6 slide-in labels
(enclosed) and 2 dummy plugs
Hole Hole Hole Hole Hole Hole 114268 MGB-C-0HHHHHH-A1-114268
10
15
1211
14 13
4 slide-in labels (enclosed), 2 inscribed slide-in labels
Blind plug Blind plug Blind plug Blind plug
Acknowl-edge
protection zone
bu
Sa�ety door request
ye
112023 MGB-C-1BBBBPP-A3-112023
15
1211
14 13
10
1 slide-in label (enclosed), 4 inscribed slide-in labels
STOP
Acknowl-edge
emergency stop
rd
WZW start
wh
Blind plug
Acknowl-edge
protection zone
bu
Sa�ety door request
ye
112022 MGB-C-1EPPBPP-A3-112022
Connection kit - Printed circuit board with plug-in spring terminals- Pre-assembled wires and cable straps
109858 MGB-A-LPSET-109858
Connecting set 2 housing sleeves �or gland M20 x 1.5 109524 MGB-A-BUSH-109524
Further in�ormation
� Dimension drawings see p. 79 � Technical data see p. 83 � Accessories and spare parts see p. 82 � www.euchner.de
Details
Emergency stop with monitoring contactAdditional normally open contact in the emer-gency stop, e.g. as monitoring contact �or the control system.
(Confguration example)
79
Accessories and Spare Parts MGB-...-AR.../-AP...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
15
021,5
2,
88
4
35
h
155
21
X
1515
1515
10,7
5
6
M20x1,5 (2x)
15
47,5 60
X 1.5 : 1
1011
12
1514
13
Dimension drawing and confguration example
Control module housing (MGB-C...)Order No. 109219Including:
� 1 x empty housing � 1 x cover � 2 x dummy plug
Connection kit Order No. 109858Including:
� 1 pc. printed circuit board with plug-in spring terminals
� 4 pcs. fxing screws �or printed circuit board
� 7 pcs. �lexible wires complete 0.34 mm² red
� 7 pcs. �lexible wires complete 0.34 mm² blue
� 16 pcs. �exible wires complete 0.34 mm² black
� 6 pcs. cable straps
Bottom o� housing109219 (open)
Printed circuit board with connection terminals 109858
Supp
ly ca
ble
Cont
rols
/ind
icat
ors
Confguration example
Position Version h [mm]
10 Emergency stop push button 33.4
11 Cover �or indicators, red10
12 Cover �or indicators, green
13 Key-operated switch 45.1
14 Illuminated push button10
15 Illuminated push button
80
Accessories and Spare Parts MGB-...-AR.../-AP...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Overview controls and indicators(suitable only �or use in the control module)
1
a b c
a b c
d e f
2
3
4
5
114529
109455109456109458
109457
109468 121806 121808 121807 121802 (rd)121803 (ye)121804 (wh)121805 (gn)
121801
1 Controls/indicatorsa Blind plugb Selector switch, 2 positions, latchingc Emergency stop, turn-to-resetd Key-operated switch, 2 positions, latching
(key removable in both positions)e Pushbutton, illumination with 109457� Cover �or indicators, di��erent colors, illumination with 109457
2 Adhesive label3 Knurled nut (included with item 1)4 Switching element/LED holder
a LED holderb Switching element, 2 positively driven NC contacts, 1 NO contact c Switching element, 1 NO contact
5 LED element, white
Control module coverNote color coding
81
Accessories and Spare Parts MGB-...-AR.../-AP...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Switching element Order no. 109455
Switching element Order no. 109456
LED holder Order no. 109458
LED Order no. 109457
x – •
Emergency stop Order no. 121808
Latching with turn-to-reset
– • –
1
0
Key-operated switch (2 positions) Order no. 121807
Incl. 2 keys Key removable in both positions
• 1) – –
10
Selector switch (2 positions) Order no. 121806
• – –
Pushbutton (illuminated) Order no. 121801
• – –
Cover �or indicators Order no. 121802 (rd)Order no. 121803 (ye)Order no. 121804 (wh)Order no. 121805 (gn)
– – •
Adhesive label Order no. 114529
•
Blind plug Order no. 109468
–
x = Optional – = Not combinable • = Combinable1) Not in combination with 109457 (LED)
Combination options
82
Accessories and Spare Parts MGB-...-AR.../-AP...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Spare parts and accessories
Designation Description Order no. Item
Blind plug 109468 MP-A-B-00-00-00-109468
Cover �or indicators (without LED holder)
Transparent - (rd) red - (ye) yellow - (wh) white - (gn) green
121802 121803 121804 121805
MP-B-L-R0-RD-00-121802 MP-B-L-R0-YE-00-121803 MP-B-L-R0-WH-00-121804 MP-B-L-R0-GN-00-121805
Pushbutton (without switching element)
121801 MP-B-P-RT-NC-A1-121801
Emergency stop (without switching element)
Latching, turn-to-reset 121808 MP-B-E-RD-00-A4-121808
Selector switch (without switching element)
2 positions, latching in 2 positions 121806 MP-B-S-RR-00-A2-121806
Key-operated switch (without switching element)
Incl. 2 keys 2 positions; key removable in each position
121807 MP-B-K-RR-00-A3-121807
Adhesive labels Silver, blank (packaging unit = 10 pcs.) 114529 MGB-A-PLATESET-NN01-114529
Connecting set 2 housing sleeves �or gland M20x1.5 109524 MGB-A-BUSH-109524
Switching element with LED holder- 2 positively driven NC contacts, 1 NO contact - 1 NO contact (expandable with LED element)
109456 109455
MP-A-C-GM-21-00-109456 MP-A-C-GU-01-00-109455
LED holder 109458 MP-A-C-CH-00-00-109458
LED element LED, white 109457 MP-A-C-LC-WH-00-109457
Lens set 3 pcs.1 x GN 1 x YE
126158 MGB-A-LENSSET-SY03-1261581 x WH
Lens sets 6 pcs.
2 x WH/1 x BU/ 1 x YE/ 1 x GN/ 1 x RD 120344 MGB-A-LENSSET-0001-120344
1 x WH/1 x BU/ 1 x YE/ 1 x GN/ 1 x RD/1 x BK 120378 MGB-A-LENSSET-0002-120378
1 x WH 1 x WH
120377 MGB-A-LENSSET-SY01-1203771 x GN 1 x WH
1 x WH 1 x WH
Lens set 15 pcs.
1 x WH 4 x BK
125359 MGB-A-LENSSET-SY02-125359
1 x WH 1 x WH
2 x WH 2 x WH
1 x WH OK 1 x WH
1 x WH 1 x WH
83
Accessories and Spare Parts MGB-...-AR.../-AP...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.
Technical data
Empty housing
Parameter ValueHousing material Rein�orced thermoplastic
Ambient temperature -20 ... 55 °C
Degree o� protection acc. to EN 60529 IP 65
Degree o� contamination /material group 3 (industrial)
External connection 2 x cable entry M20x1.5
Internal connection (plug-in spring terminals)
0.2 ... 1.5 mm2
Controls
Parameter ValueMech. li�e- Pushbutton- Emergency stop- Selector switch- Key-operated switch
1x106
5x104
3x105
3x104
Ambient temperature -20 ... 55 °C
Degree o� protection acc. to EN 60529IP65 (ftted),
Key-operated switch IP54
Switching elements, LED
Parameter ValueLi�e at 10 mA/24 V DC...-GU-......-GM-...
1x106
5x104
Ambient temperature -20 ... 55 °C
Operating voltage- Switching elements- LED
5 ... 35 V24 V
Operating current- Switching elements- LED
1 ... 100 mAmax. 30 mA permissible
Breaking capacity max. 250 mW
Connection Connector 2.8 x 0.8 mm
Contact material Au
Shock resistance according to IEC 60068-2-27 15 g
Vibration resistance IEC 60068-2-6
5 g (10.. 500 Hz)
Positively driven ...GM...
According to IEC 60947-5-1 (positively driven NC contact)
84
Accessories and Spare Parts MGB-...-AR.../-AP...
Subject to technical modifcations; no responsibility is accepted �or the accuracy o� this in�ormation.