multimedia expansion board ii (meb ii) user's guide - microchip

2013 Microchip Technology Inc. DS70005148A

Multimedia Expansion Board II (MEB II)User’s Guide

DS70005148A-page 2 2013 Microchip Technology Inc.

Information contained in this publication regarding deviceapplications and the like is provided only for your convenienceand may be superseded by updates. It is your responsibility toensure that your application meets with your specifications.MICROCHIP MAKES NO REPRESENTATIONS ORWARRANTIES OF ANY KIND WHETHER EXPRESS ORIMPLIED, WRITTEN OR ORAL, STATUTORY OROTHERWISE, RELATED TO THE INFORMATION,INCLUDING BUT NOT LIMITED TO ITS CONDITION,QUALITY, PERFORMANCE, MERCHANTABILITY ORFITNESS FOR PURPOSE. Microchip disclaims all liabilityarising from this information and its use. Use of Microchipdevices in life support and/or safety applications is entirely atthe buyer’s risk, and the buyer agrees to defend, indemnify andhold harmless Microchip from any and all damages, claims,suits, or expenses resulting from such use. No licenses areconveyed, implicitly or otherwise, under any Microchipintellectual property rights.

Note the following details of the code protection feature on Microchip devices:

• Microchip products meet the specification contained in their particular Microchip Data Sheet.

• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions.

• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property.

• Microchip is willing to work with the customer who is concerned about the integrity of their code.

• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.”

Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of ourproducts. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such actsallow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified.

QUALITY MANAGEMENT SYSTEM CERTIFIED BY DNV

== ISO/TS 16949 ==

Trademarks

The Microchip name and logo, the Microchip logo, dsPIC, FlashFlex, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART, PIC32 logo, rfPIC, SST, SST Logo, SuperFlash and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.

FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MTP, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A.

Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries.

Analog-for-the-Digital Age, Application Maestro, BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP, Mindi, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, mTouch, Omniscient Code Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, REAL ICE, rfLAB, Select Mode, SQI, Serial Quad I/O, Total Endurance, TSHARC, UniWinDriver, WiperLock, ZENA and Z-Scale are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.

SQTP is a service mark of Microchip Technology Incorporated in the U.S.A.

GestIC and ULPP are registered trademarks of Microchip Technology Germany II GmbH & Co. KG, a subsidiary of Microchip Technology Inc., in other countries.

All other trademarks mentioned herein are property of their respective companies.

© 2013, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved.

Printed on recycled paper.

ISBN: 978-1-62077-656-8

MULTIMEDIA EXPANSIONBOARD (MEB) II USER’S

GUIDE

Table of Contents

Chapter 1. Introduction1.1 Kit Contents .................................................................................................. 111.2 System Diagram ........................................................................................... 111.3 Multimedia Features ..................................................................................... 131.4 MEB and MEB II Differences ........................................................................ 17

Chapter 2. Hardware2.1 Hardware Features ....................................................................................... 19

Appendix A. Board Layout and SchematicsA.1 Board Layout ................................................................................................ 32A.2 Schematics .................................................................................................. 35

Appendix B. Bill of Materials....................................................................................... 49

2013 Microchip Technology Inc. DS70005148A-page 3

Multimedia Expansion Board (MEB) II User’s Guide

NOTES:


MULTIMEDIA EXPANSIONBOARD II (MEB II) USER’S

GUIDE

Preface

INTRODUCTION

This chapter contains general information that will be useful to know before using the Multimedia Expansion Board II (MEB II). Items discussed in this chapter include:

• Document Layout• Conventions Used in this Guide• Recommended Reading• The Microchip Web Site• Development Systems Customer Change Notification Service• Customer Support• Document Revision History

DOCUMENT LAYOUT

This document describes how to use the Multimedia Expansion Board II (MEB II) as a development tool to emulate and debug firmware on a target board. This user’s guide is composed of the following chapters:

• Chapter 1. “Introduction” provides a brief overview of the starter kit, highlighting its features and uses.

• Chapter 2. “Hardware” provides the hardware descriptions of the starter kit.

• Appendix A. “Board Layout and Schematics” provides a block diagram, board layouts, and detailed schematics of the starter kit.

• Appendix B. “Bill of Materials” provides the bill of materials for the components used in the design and manufacture of the starter kit.

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and documentation are constantly evolving to meet customer needs, so some actual dialogs and/or tool descriptions may differ from those in this document. Please refer to our web site (www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each page, in front of the page number. The numbering convention for the DS number is “DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level of the document.

For the most up-to-date information on development tools, see the MPLAB® IDE online help. Select the Help menu, and then Topics to open a list of available online help files.


Multimedia Expansion Board II (MEB II) User’s Guide

CONVENTIONS USED IN THIS GUIDE

This manual uses the following documentation conventions:

DOCUMENTATION CONVENTIONS

Description Represents Examples

Italic characters Referenced books MPLAB IDE User’s Guide

Emphasized text ...is the only compiler...

Initial caps A window the Output window

A dialog the Settings dialog

A menu selection select Enable Programmer

Quotes A field name in a window or dialog

“Save project before build”

Underlined, italic text with right angle bracket

A menu path File>Save

Bold characters A dialog button Click OK

A tab Click the Power tab

Text in angle brackets < > A key on the keyboard Press <Enter>, <F1>

Plain Courier New Sample source code #define START

Filenames autoexec.bat

File paths c:\mcc18\h

Keywords _asm, _endasm, static

Command-line options -Opa+, -Opa-

Bit values 0, 1

Constants 0xFF, ‘A’

Italic Courier New A variable argument file.o, where file can be any valid filename

Square brackets [ ] Optional arguments mcc18 [options] file [options]

Curly brackets and pipe character: { | }

Choice of mutually exclusive arguments; an OR selection

errorlevel {0|1}

Ellipses... Replaces repeated text var_name [, var_name...]

Represents code supplied by user

void main (void){ ...}

Notes A Note presents information that we want to re-emphasize, either to help you avoid a common pitfall or to make you aware of operating differences between some device family members. A Note can be in a box, or when used in a table or figure, it is located at the bottom of the table or figure. Note 1: This is a note used in a

table.

Note: This is a standard note box.

CAUTION

This is a caution note.


Preface

RECOMMENDED READING

This user’s guide describes how to use the starter kit. The following Microchip documents are available and recommended as supplemental reference resources.

Release Notes for the Multimedia Expansion Board

For the latest information, Microchip has a dedicated web page for the Multimedia Expansion Board II (MEB II), which can be accessed at: http://www.microchip.com/meb2

Family Reference Manual Sections

Family Reference Manual sections are available, which explain the operation of the PIC32 microcontroller family architecture and peripheral modules. The specifics of each device family are discussed in the individual family’s device data sheet.

Device Data Sheets

Refer to the appropriate device data sheet for device-specific information and specifications. These documents may be obtained from the Microchip web site or your local sales office.

Reference information found in these data sheets includes:

• Device memory maps

• Device pinout and packaging details

• Device electrical specifications

• List of peripherals included on the devices

PIC32MX Flash Programming Specification (DS60001145)

Refer to this document for information on instruction sets and firmware development.

MPLAB® XC32 C/C++ Compiler User’s Guide (DS50001686)

This document details the use of Microchip’s MPLAB XC32 Compiler for PIC32 microcontrollers to develop 32-bit applications.

MPLAB® X IDE User’s Guide (DS50002027)

Consult this document for more information pertaining to the installation and implementation of the MPLAB X IDE software.

THE MICROCHIP WEB SITE

Microchip provides online support via our web site at http://www.microchip.com. This web site makes files and information easily available to customers. Accessible by most Internet browsers, the web site contains the following information:

• Product Support – Data sheets and errata, application notes and sample programs, design resources, user’s guides and hardware support documents, latest software releases and archived software

• General Technical Support – Frequently Asked Questions (FAQs), technical support requests, online discussion groups, Microchip consultant program member listings

• Business of Microchip – Product selector and ordering guides, latest Microchip press releases, listings of seminars and events; and listings of Microchip sales offices, distributors and factory representatives



DEVELOPMENT SYSTEMS CUSTOMER CHANGE NOTIFICATION SERVICE

Microchip’s customer notification service helps keep customers current on Microchip products. Subscribers will receive e-mail notification whenever there are changes, updates, revisions or errata related to a specified product family or development tool of interest.

To register, access the Microchip web site at www.microchip.com, click on Customer Change Notification and follow the registration instructions.

The Development Systems product group categories are:

• Compilers – The latest information on Microchip C compilers and other language tools

• Emulators – The latest information on the Microchip in-circuit emulator, MPLAB REAL ICE™

• In-Circuit Debuggers – The latest information on the Microchip in-circuit debugger, MPLAB ICD 3

• MPLAB X IDE – The latest information on Microchip MPLAB X IDE, the Windows® Integrated Development Environment for development systems tools

• Programmers – The latest information on Microchip programmers including the PICkit™ 3 development programmer

CUSTOMER SUPPORT

Users of Microchip products can receive assistance through several channels:

• Distributor or Representative

• Local Sales Office

• Field Application Engineer (FAE)

• Technical Support

Customers should contact their distributor, representative or field application engineer (FAE) for support. Local sales offices are also available to help customers. A listing of sales offices and locations is included in the back of this document.

Technical support is available through the web site at: http://support.microchip.com


http://www.microchip.com

Preface

DOCUMENT REVISION HISTORY

Revision A (November 2013)

This is the initial release of this document.



NOTES:



GUIDE

Chapter 1. Introduction

Thank you for choosing the Microchip Technology Multimedia Expansion Board II (MEB II). The MEB II is a compact, highly versatile development board, which in conjunction with a PIC32 starter kit and a display daughter board, provides a system for developing a wide range of multimedia applications. The MEB II kit includes a 4.3" WQVGA PCAP touch display daughter board and supports detachable display boards allowing for a variety of resolutions.

This chapter covers the following topics:

• Kit Contents• System Diagram• Multimedia Features

• MEB and MEB II Differences

1.1 KIT CONTENTS

The Multimedia Expansion Board II (MEB II) contains the following items:

• Multimedia Expansion Board II (MEB II) (Mother Board)

• 4.3" WQVGA Display Board (Daughter Board)

• Multimedia Expansion Board II (MEB II) Information Sheet

1.2 SYSTEM DIAGRAM

The MEB II system consists of the PIC32 Starter Kit, MEB II mother board, and a dis-play daughter board (4.3" PCAP touch), as shown in Figure 1-1. MEB II is a mother board that contains all the necessary components and interfaces to support the multi-media features. PIC32 starter kit connects to MEB II through a 168-pin board-to-board connector and contains the PIC32 microcontroller with additional components (debug, memory, communication etc). Refer to http://www.microchip.com/meb2 for supported PIC32 Starter Kits and other additional information. The display daughter board is con-nected to the MEB II using a 60-pin board-to-board connector (detachable), providing flexibility to support a variety of displays.

Note: If you are missing any part of a kit, contact a Microchip sales office for assis-tance. A list of Microchip offices for sales and service is provided on the back page of this document.



FIGURE 1-1: MEB II SYSTEM DIAGRAM

MEB II System

Starter

Kit with

(PIC32) EBI-SRAM orEBI-PSRAM

VGA Camera

24-bit Audio

Bluetooth®

Accelerometer

Temperature

Dis

pla

y C

onne

ctor

Display with

PCAP touch

PIC

tail™

Con

nect

ormTouch™ Buttons

microSD

Sensor

Wi-Fi

Sta

rter

Kit

Con

nect

or


Introduction

1.3 MULTIMEDIA FEATURESThe component layout of the MEB II is shown in Figure 1-2 (front side) and Figure 1-3 (bottom side). As mentioned previously, the MEB II kit also includes a 4.3" PCAP touch display board. The component layout of this board is shown in Figure 1-4 (front side) and Figure 1-5 (bottom side).

The front side of the MEB II includes these key features, as shown in Figure 1-2:

1. Display daughter board connector (60-pin Hirose board-to-board connector)

2. mTouch™ buttons

3. Push Button

4. Power LED

5. User LEDs

6. VGA Camera (OVM7690)

7. PICtail™ Connector

8. Analog temperature sensor

FIGURE 1-2: MULTIMEDIA EXPANSION BOARD II (MEB II) LAYOUT (FRONT SIDE)

62

1

8

54

3

7



The bottom side of the MEB II includes these key features, as shown in Figure 1-3:

1. Regulated 5V and 3.3V power supply for powering the board through a 9-15V DC Adapter.

2. PIC32 Starter Kit connector (168-pin Hirose board-to-board connector).

3. 24-bit stereo audio codec (AK4953A).

4. Integrated 802.11bg wireless module (MRF24WG0MA).

5. Low-cost Bluetooth® HCI transceiver (BTM805).

6. EBI SRAM memory (IS61WV102416BLL).

7. microSD slot.

8. Analog accelerometer (ADXL325).

FIGURE 1-3: MULTIMEDIA EXPANSION BOARD II (MEB II) LAYOUT (BOTTOM SIDE)

1

2

6

4

5

7

8

3


Introduction

The front side of the 4.3" WQVGA PCAP touch display board includes this key feature, as shown in Figure 1-4: 1) 4.3" WQVGA glass with PCAP touch panel.

FIGURE 1-4: WQVGA PCAP TOUCH DISPLAY BOARD LAYOUT (FRONT SIDE)

1



The bottom side of the 4.3" WQVGA PCAP touch display board includes these key features, as shown in Figure 1-5:

1. 60-pin MEB II connector.

2. Display panel connector.

3. PCAP touch connector.

4. Microchip touch controller (MTCH6301).

5. 6-in PCAP touch connector for future use.

6. PICkit™ Serial Analyzer interface (optional)

FIGURE 1-5: WQVGA PCAP TOUCH DISPLAY BOARD LAYOUT (BOTTOM SIDE)

1

23

4

6

5


Introduction

1.4 MEB AND MEB II DIFFERENCES

Table describes the differences between the first (MEB) and second (MEB II) generation boards.

TABLE 1-1: MEB BOARD DIFFERENCES

Feature MEB II MEB

Starter Kit Connector 160-pin Hirose FX10 series board-to-board connector

132-pin Hirose FX10 series board-to-board connector

Starter Kit Refer to: http://www.microchip.com/meb2 Refer to: http://www.microchip.com/meb

Display Low-Cost Controllerless (LCC) graphics On-board graphics controller (SSD1926)

60-pin display connector N/A

Includes a 4.3" WQVGA display with projected capacitive touch(MTCH6301)

3.2" QVGA display with resistive touch

Supports up to 7" WVGA display through a connector

N/A

External SRAM (EBI) ISSI 2 MB external synchronous RAM (IS61WV102416BLL-10TLI

N/A

VGA Camera Available on board N/A

Audio 24-bit audio codec (AK4953A) 24-bit audio codec (WM8731)

Bluetooth® Low cost Bluetooth™ HCI transceiver N/A

Wi-Fi IEEE 802.11b/g (MRF24WG0MA) transceiver module

IEEE 802.11b (MRF24WB0MA) transceiver module

Accelerometer ADXL325 3-axis analog accelerometer BMA150 3-axis digital accelerometer and temperature sensor

Temperature Sensor MCP9700T analog temperature sensor Temperature sensor in BMA150

microSD Connects to Host CPU on the starter kit Connects to the graphics controller

mTouch™ Buttons Two touch buttons; additional touch button support through a PICtail™ connector

Touch button support through a PICtail™ connector

PICtail™ Connector Yes Yes

EEPROM N/A 128-byte EEPROM (24LC08)

SPI Flash See Note 1 2MB SST25VF016 serial Flash

CPLD See Note 2 Xilinx XC2C64A for port enhancement

Joystick N/A Available

Note 1: Serial Quad Flash support through the PIC32 Starter Kit.

2: Port enhancement is not necessary due to extended connector and available device pins.



NOTES:



GUIDE

Chapter 2. Hardware

This chapter describes the hardware used in MEB II and 4.3" WQVGA PCAP Touch Display Board.

2.1 HARDWARE FEATURES

2.1.1 Power Supply

Power can be supplied to the MEB II in two ways: 1) through the DC connector (J3) located on the MEB II (Figure 2-1), and 2) through the USB on the Starter Kit. By connecting a 9-15V power supply to the DC connector or the USB device on the Starter Kit, the MEB II, Display Daughter Board and the Starter Kit will receive the proper voltages. However, if the application plans to use multiple features of the MEB II, it is recommended to use a 9V to 15V DC power supply.

FIGURE 2-1: 9V TO 15V DC POWER SUPPLY

Note: Refer to Appendix A. “Board Layout and Schematics” and Appendix B. “Bill of Materials” for the schematics and manufacturer and part number information of the hardware components used in the Multimedia Expansion Board II (MEB II) and the 4.3" WQVGA PCAP Touch Display Board.

CAUTION

When connecting the Multimedia Expansion Board II (MEB II) to a starter kit, do not have power applied to either the starter kit or the DC power supply. Failure to heed this caution could result in hardware damage.



2.1.2 Starter Kit Connector

The starter kit connector, as shown in Figure 2-2, is a high-speed, 168-pin Hirose FX10 board-to-board connector that is used to connect the MEB II to PIC32 starter kits.

FIGURE 2-2: STARTER KIT CONNECTOR

After connecting a PIC32 starter kit, applications can be developed and run using the rich features of the MEB II. Table 2-1 shows the Starter Kit Connector pin and the MEB II component mapping.

CAUTION

When connecting the Multimedia Expansion Board II (MEB II) to a starter kit, do not have power applied through either the starter kit or the DC power supply. Failure to heed this caution could result in hardware damage.

TABLE 2-1: STARTER KIT CONNECTOR MAPPING

Starter Kit Connector MEB II

Pin Number

SignalPin

TypeComponent Description

1 SS1 O Audio Codec Left-Right Clock

64 RH3 O Audio Power Down

82 SDA2 I/O I2C data

94 SDI1 I Audio Serial Data Output

96 REFCLKO1 O External Master Clock Input

112 SCL2 I/O Serial Clock

117 SDO1 O Audio Serial Data Input

118 SCK1 O Audio Bit Clock

7 RB1 O EBI-SRAM/Display Horizontal Sync.

68 EBIWE O Pixel Clock

77 RJ3 O Reset

78 EBICS2 O Chip Select

103 RB4 O Data Enable

108 RH9 O Vertical Sync

116 RH13 O Standby

131 EBID15 I/O R0

132 LCD_B7 I/O B7

133 LCD_R1 I/O R1

134 EBID3 I/O B6

135 LCD_R2 I/O R2

136 EBID2 I/O B5

137 EBID11 I/O R3


Hardware

138 EBID1 I/O EBI-SRAM/Display B4

139 EBID12 I/O R4

140 EBID0 I/O B3

141 EBID13 I/O R5

142 EBID4 I/O B2

143 EBID14 I/O R6

144 LCD_B1 I/O B1

145 LCD_R7 I/O R7

146 LCD_B0 I/O B0

147 EBID10 I/O G0

148 LCD_G7 I/O G7

149 LCD_G1 I/O G1

150 EBID9 I/O G6

151 EBID5 I/O G2

152 EBID8 I/O G5

153 EBID6 I/O G3

154 EBID7 I/O G4

155 EBIOE O Pixel Clock

13 MCLR I/O Touch Touch Controller Reset (System Reset in general)

110 RH10 O Touch Wakeup


126 SDA1 I/O Serial Data

92 AN42 I mTouch button Touch Button B1

111 AN28 I Touch Button B2

80 RJ7 O VGA Camera Power Down

86 RA9 I Vertical Sync

90 OC5 O System Input Clock

104 SDA3 I/O Serial Data


19 INT2 I VGA Camera Pixel

93 RE8 O VGA Camera Regulator

Shutdown

27 EBIA1/RK1 I/O EBI-SRAM/VGA Camera

Address 1/VGA Camera Data 1

31 EBIA3/RK2 I/O Address 3/VGA Camera Data 2







TABLE 2-1: STARTER KIT CONNECTOR MAPPING (CONTINUED)


Pin Number

SignalPin




25 EBIA0 O EBI-SRAM Address 0

29 EBIA2 O Address 2












79 EBIA23 O Sleep Enable

81 EBIBS0 O Bank Select 0 (Lower Bank)

83 EBIBS1 O Bank Select 1 (Upper Bank)

14 INT0 I Wi-Fi Wi-Fi Interrupt

85 RH14 O Sleep

89 SDI4 I Serial Data Out

105 SDO4 O Serial Data In

95 SS4 O Chip Select

120 RJ0 O Reset

114 SCK4 I/O Serial Clock

87 SCK2 I Bluetooth Serial Transmit

107 RB2 O Regulator Enable

122 U2RTS O Request to send

91 U2CTS I/O Serial Clear to Send

88 U2TX O Serial Receive/mTouch button analog channel

119 AN6 O Accelerometer X-axis out

121 AN7 O Y-axis out

123 AN8 O Z-axis out

23 AN23 I Temperature Sensor Temp. Sense channel

163 SD_DATA3/SD_CD I/O microSD Data 3/Card Detect

164 SD_DATA2 I/O Data 2



167 SD_CLK O Clock

168 SD_CMD O Command

76 RJ5 I Mechanical Card Detect

4 RA0 O Fire Button

113 RH0 O LED1

62 RH2 O LED2

115 RH1 O LED3

92 RH6 O LED4

84 RH11 O LED5

TABLE 2-1: STARTER KIT CONNECTOR MAPPING (CONTINUED)


Pin Number

SignalPin



Hardware

2.1.3 Display Connector

The MEB II supports display on a separate daughter card through a 60-pin Hirose DF12 board-to-board display connector, as shown in Figure 2-3.

FIGURE 2-3: DISPLAY CONNECTOR

The MEB II supports a variety of displays through the daughter board and the kit includes a 4.3" WQVGA Projected Capacitive (PCAP) Touch display. Refer to 2.1.15 “4.3” WQVGA PCAP Touch Display Daughter Board” for additional details. Table 2-2 shows the display connector functional mapping.

CAUTION

When connecting the Multimedia Expansion Board II (MEB II) to a starter kit or to the display daughter board, do not have power applied through either the starter kit or the DC power supply. Failure to heed this caution could result in hardware damage.



TABLE 2-2: DISPLAY CONNECTOR

Display Connector

Pin Number Signal Pin Type Description

9 G4 I/O Display RGB Data

10 G0 I/O

11 G5 I/O

12 G1 I/O

13 G6 I/O

14 G2 I/O

15 G7 I/O

16 G3 I/O

17 R0 I/O

18 B0 I/O

19 R1 I/O

20 B1 I/O

21 R2 I/O

22 B2 I/O

23 R3 I/O

24 B3 I/O

25 R4 I/O

26 B4 I/O

31 R5 I/O

32 B5 I/O

33 R6 I/O

34 B6 I/O

35 R7 I/O

36 B7 I/O

37 PCLK I/O Display Pixel Clock

38 STBYB I/O Display Standby

39 VSYNC I/O Display Vertical Sync

40 HSYNC I/O Display Horizontal Sync

41 DE I/O Display Data Enable

42 CS I/O Display Chip Select

43 INT I/O Touch interrupt

44 SCL I/O Touch Serial Clock

45 WAKE I/O Touch Wake

46 SDA I/O Touch Serial Data

47 BLEN I/O Display Backlight Enable

48 RESET I/O Display Reset

55 MCLR I/O System Reset


Hardware

2.1.4 EBI SRAM Memory (Optional)

The MEB II includes an External Bus Interface (EBI) routed to support both asynchronous SRAM and pseudo-SRAM memories. By default, these memories are not populated on the board and users can populate them as needed. The interface is routed considering both ISSI SRAM (IS61WV51216BLL-10TLI) and pseudo-SRAM (IS66WVE4M16BLL-70BLI) memories, as shown in Figure 2-4.

FIGURE 2-4: EBI SRAM MEMORY

2.1.5 VGA Camera Sensor

The MEB II includes an Omnivision OVM7690 VGA camera sensor with an active array size of 640 x 480 (VGA resolution), as shown in Figure 2-5. The PIC32 microcontroller uses the I2C interface to control the sensor and the sensor communicates the image data through an 8-bit (DATA7-DATA0) data bus.

FIGURE 2-5: VGA CAMERA SENSOR



2.1.6 24-bit Audio Codec

The MEB II includes an Asahi Kasei AKM4953A 24-bit audio codec for high-quality audio, as shown in Figure 2-6. The AK4953A is low power consumption 24-bit stereo codec with a microphone, headphone, and speaker amplifiers, which is suitable for portable applications with a recording/playback function. The I2C interface of the audio codec is used by the PIC32 device for control and the I2S interface is used for audio.

FIGURE 2-6: 24-BIT AUDIO CODEC

2.1.7 Bluetooth® HCI Transceiver

The Flaricomm BTM805 Bluetooth® HCI (Host Control Interface) module is included in the MEB II, adding Bluetooth capability, as shown in Figure 2-7. The PIC32 microcontroller communicates with the Bluetooth module through the UART interface.

FIGURE 2-7: BLUETOOTH® TRANSCEIVER

Note: In an application, since Bluetooth and microSD share the same pins on the board, only one can be used at any given time.


Hardware

2.1.8 802.11b/g Wireless Transceiver

The MEB II includes 802.11b/g wireless connectivity through the Microchip MRF24WG0MA device, as shown in Figure 2-8. The PIC32 microcontroller uses the SPI bus interface to communicate to the wireless module.

FIGURE 2-8: 802.11b/g TRANSCEIVER

2.1.9 Accelerometer

The MEB II includes an Analog Devices ADXL325BCPZ analog 3-axis accelerometer, as shown in Figure 2-9. The ADXL325 is a small, low power, 3-axis accelerometer with signal conditioned voltage outputs that measures acceleration with a minimum full-scale range of ±5g. The accelerometer uses three analog channels from the PIC32 microcontroller for the three axes (x, y and z).

FIGURE 2-9: ACCELEROMETER



2.1.10 Temperature Sensor

The MEB II includes a Microchip MCP9700T analog temperature sensor, as shown in Figure 2-10. The MCP9700T uses one analog channel on the PIC32 microcontroller. The MCP9700 Linear Active Thermistor™ IC is an analog temperature sensor that con-verts temperature to an analog voltage. The MCP9700 provides a low-cost solution for applications that require measurement of a relative change of temperature with ±1°C accuracy at room temperature.

FIGURE 2-10: TEMPERATURE SENSOR

2.1.11 microSD Card Slot

The MEB II includes a microSD card slot that interfaces to the PIC32 microcontroller through an SD Interface, as shown in Figure 2-11.

FIGURE 2-11: microSD CARD SLOT

2.1.12 Touch Buttons

The MEB II includes two touch buttons that use the Microchip mTouch™ technology, as shown in Figure 2-12. These two touch buttons are interfaced to the PIC32 through two analog channels.

FIGURE 2-12: TOUCH BUTTONS

Note: In an application, since Bluetooth and microSD share the same pins on the board, only one can be used at any given time.


Hardware

2.1.13 PICtail™ Connector

The MEB II includes an I/O expansion slot, which enables the use of several of Micro-chip's PICtail™ daughter boards, as shown in Figure 2-13. For more information on how to interface to the board, as not all daughter boards are compatible, refer to the specific PICtail daughter board schematic.

FIGURE 2-13: PICtail™ CONNECTOR

2.1.14 Push Button and User Controlled LEDs

The MEB II includes one power LED, five user-controlled LEDs, and one Push Button, as shown in Figure 2-14.

FIGURE 2-14: PUSH BUTTON AND USER CONTROLLED LEDS

2.1.15 4.3” WQVGA PCAP Touch Display Daughter Board

The 4.3" WQVGA PCAP touch display daughter board includes a 4.3" WQVGA display and a Microchip MTCH6301 touch controller to support the PCAP touch screen overlay on the display. The daughter board connects to the MEB II Development Board through a 60-pin board-to-board connector. Refer to 1.3 “Multimedia Features” for additional information on the display daughter board component layout. Figure 2-15 shows the display connector.

FIGURE 2-15: DISPLAY PANEL CONNECTOR AND BACKLIGHT CIRCUIT



2.1.16 MTCH6301 Touch Controller

The MTCH6301 is a turn-key PCAP controller that allows easy integration of multi-touch and gestures to create a rich user interface. The MTCH6301 supports up to 13 receive (RX) and 18 transmit (TX) channels, and sensor sizes up to 4.3". The MTCH6301 communicates with the PIC32 microcontroller through a serial I2C bus and an interrupt, as shown in Figure 2-16.

FIGURE 2-16: MTCH6301 TOUCH CONTROLLER



GUIDE

Appendix A. Board Layout and Schematics

This appendix provides examples of the board layout and component schematics for the Multimedia Expansion Board II (MEB II) and includes the following figures:

• Figure A-1: “MEB II Layout (Top Assembly)”

• Figure A-2: “MEB II Layout (bottom assembly)”

• Figure A-3: “4.3” WQVGA PCAP Touch Board Layout (Top Assembly)”

• Figure A-4: “4.3” WQVGA PCAP Touch Board Layout (bottom Assembly)”

• Figure A-5: “Power Supply”

• Figure A-6: “Starter Kit Connector”

• Figure A-7: “Display connector”

• Figure A-8: “EBI SRAM Memory”

• Figure A-9: “VGA Camera Sensor and 2.8V Regulator”

• Figure A-10: “24-bit Audio Codec”

• Figure A-11: “Bluetooth® Transceiver”

• Figure A-12: “802.11b/g Transceiver”

• Figure A-13: “Accelerometer”

• Figure A-14: “Temperature Sensor”

• Figure A-15: “microSD Card Slot”

• Figure A-16: “Touch Buttons”

• Figure A-17: “PICtail™ Connector”

• Figure A-18: “Push Button and User Controlled LEDs”

• Figure A-19: “Display Panel Connector and Backlight Circuit”

• Figure A-20: “Touch Controller”



A.1 BOARD LAYOUT

FIGURE A-1: MEB II LAYOUT (TOP ASSEMBLY)


Board Layout and Schematics

FIGURE A-2: MEB II LAYOUT (BOTTOM ASSEMBLY)

FIGURE A-3: 4.3” WQVGA PCAP TOUCH BOARD LAYOUT (TOP ASSEMBLY)



FIGURE A-4: 4.3” WQVGA PCAP TOUCH BOARD LAYOUT (BOTTOM ASSEMBLY)



A.2 SCHEMATICSFIGURE A-5: POWER SUPPLY

16V10uF

C5616V10uF

C57

GNDGND

LPS4018-472M4.7uH

L1

0RR1

R35DNP

10K

R17

+5V

22uFC66

22uFC67

GND

0.022uF

C55

+9V

+5V

16V10uF

C580.1uFC1

2.2uF10V

C49

GNDGND

+3.3V

3V Power Supply

VIN1

GND2

VOUT 3

TAB(GND)4

U5

MCP1826S-3302E/DB

NC6

VIN11

VIN2

FB5

SW 13

SW1

PG

ND

14

SG

ND

4

VIN3

EN9

NC7

SW 16

SW 12BO

OS

T1

0

EP17

PG8

PG

ND

15

U4

MC

P1

63

22T

-500

E/N

G

GND



FIGURE A-6: STARTER KIT CONNECTOR

OC1/LCD_BLEN

RA1/ CAM_HREF

RA0/PUSH_BUTTON

GND

+5V+5V

GND

EBIA2

GND

+3.3V

GND

+3.3V

SDI2/INT4/CAM_PCLK/EBIA8

SS3/EBIA15

RH2/LED2

GND

+3.3V

GND

+3.3V

LCD_RESET

SDA2/AUDIO_SDA

RH11/LED5

RH14/WIFI_SLEEP

SCK3/U2TX/BT_RX

SDI4/WIFI_SDO OC5/CAM_XVCLK

AN12/SDO2/U2CTS/BT_CTS RH6/LED4/AN42

REFCLKO1/AUDIO_MCKISS4/WIFI_CS

AN32/SDI1/AUDIO_SDTO

GND

+3.3V

GND

+3.3V

SS2

LCD_DE

AN3/SDO4/WIFI_SDI

CAM_SDA

CAM_SCL

RA9

RH0/LED1

SCL2/AUDIO_SCL

SCK4/WIFI_SCK/SDI3

LCD_STBYB

SCK1/AUDIO_BICKAN5/SDO1/AUDIO_SDTI

AN6/ACCEL_XOUT

AN7/ACCEL_YOUT

AN8/ACCEL_ZOUT SCL1/TOUCH_SCL

SDA1/TOUCH_SDA

GND

+3.3V

GND

+3.3V

LCD_G4/EBID7LCD_G3/EBID6

LCD_G2/EBID5

LCD_G1

LCD_G0/EBID10

LCD_B6/EBID3

LCD_B7

LCD_G5/EBID8

LCD_B5/EBID2

LCD_B4/EBID1

LCD_B3/EBID0

LCD_B1

LCD_B2/EBID4

LCD_G6/EBID9

LCD_G7

LCD_R0/EBID15

LCD_R1

LCD_R2

LCD_R3/EBID11

LCD_R4/EBID12

LCD_R5/EBID13

LCD_R6/EBID14

LCD_R7

SD_DATA3/SD_CD

GNDGND

+5V +5V

EBIBS1

AN14/SCK2/U2RX/BT_TX

U2RTS/BT_RTS

INT0/WIFI_INT

AN23/TEMP_SENSE

RH1/LED3

RH3/AUDIO_PDN

EBIWE/LCD_PCLK

AN28/RA10

RK0/CAM_DATA0/EBIA16






RK1/CAM_DATA1/EBIA1

RK2/CAM_DATA2/EBIA3

+3.3V

+3.3V

+3.3V

INT1/TOUCH_INT

AN0/CAM_LDO_SHDN

LCD_HSYNC

MCLR

EBIA0

EBIA4

EBIA5

EBIA6

EBIA7

EBIA9

EBIA10

EBIA11

EBIA12

EBIA13

EBIA14

EBICS0

EBICS1

EBICS2/LCD_CS

CAM_PWDNEBIA23

EBIBS0

CAM_VSYNC

BT_VREG_EN LCD_VSYNC

RJ0/WIFI_RESET

SD_DATA2

SD_DATA1 SD_DATA0

SD_CLK SD_CMD

TOUCH_WAKE

SS1/AUDIO_LRCK

EBIOE/LCD_PCLK

117 118

111 112

105 106

99 100

93 94

87 88

81 82

75 76

69 70

57 58

51 52

45 46

39 40

33 34

27 28

21 22

15 16

9 10

3 4

119 120

107 108

109 110

113 114

115 116

95 96

97 98

101 102

103 104

83 84

85 86

89 90

91 92

71 72

73 74

77 78

79 80

59 60

61 62

65 66

67 68

47 48

49 50

53 54

55 56

35 36

37 38

41 42

43 44

25 26

29 30

23 24

19 20

13 14

17 18

11 12

7 8

1 2

5 6

31 32

63 64

121 122

123 124

125 126

127 128

129 130

135 136

137 138

131 132

133 134

141

140

143

142

145

144

147 148

149 150

151 152

153 154

159 160

161 162

155 156

157 158

163 164

165 166

167 168

146

139

J1

FX

10

A-1

68S

-SV

R231.1K

R261.1K

R241.1K

R251.1K

LCD_B0



FIGURE A-7: DISPLAY CONNECTOR

GND GND

+3.3V+3.3V

GND GND

+3.3V+3.3V

+5V +5V

GNDGND

GNDGND

TOUCH_WAKE

SCL1/TOUCH_SCL

SDA1/TOUCH_SDA

LCD_G1

LCD_R1

LCD_R2

LCD_R7 LCD_B7

LCD_B0

LCD_B1

LCD_G7

OC1/LCD_BLEN

LCD_DE

LCD_STBYB

LCD_VSYNC

EBIWE/LCD_PCLK

EBIOE/LCD_PCLKLCD_PCLK

LCD_HSYNC

MCLR

LCD_RESET

EBICS2/LCD_CS

LCD_R0/EBID15

LCD_B6/EBID3

LCD_B5/EBID2

LCD_B4/EBID1

LCD_B3/EBID0

LCD_B2/EBID4

LCD_G4/EBID7

LCD_G5/EBID8

LCD_G6/EBID9

LCD_R3/EBID11

LCD_R4/EBID12

LCD_R5/EBID13

LCD_R6/EBID14

LCD_G0/EBID10

LCD_G3/EBID6

LCD_G2/EBID5

LCD_PCLK

1 2

3 4

5 6

7 8

9 10

11 12

13 14

15 16

17 18

19 20

21 22

23 24

25 26

27 28

29 30

31 32

33 34

35 36

37 38

39 40

41 42

43 44

45 46

47 48

49 50

51 52

53 54

55 56

57 58

59 60

61

62J4

DF

12(3

.0)-

60D

P-0

.5V

(86)

12

3J9

INT1/TOUCH_INT



FIGURE A-8: EBI SRAM MEMORY

A01

A12

A23

A34

A45

CE6

I/O07

I/O18

I/O29

I/O310

VDD11

GND12

I/O413

I/O514

I/O615

I/O716

WE17

A518

A619

A720

A821

A922 A10 23

A11 24

A12 25

A1326

A1427

A1828

I/O829

I/O9 30

I/O10 31

I/O1132

VDD33

GND34

I/O1235

I/O13 36

I/O14 37

I/O15 38

LB39

UB40

OE41

A15 42

A16 43

A17 44U11

IS61WV51216BLL-10TLI

EBIA2

RK1/CAM_DATA1/EBIA1

RK2/CAM_DATA2/EBIA3

EBIA0

EBIA4

EBIA5

EBIA6


SS3/EBIA15




EBIA7

EBIA9 EBIA10

EBIA11

EBIA12

EBIA13

EBIA14

EBIWE/LCD_PCLK

EBICS0

EBIBS1

EBIBS0

LCD_R0/EBID15

LCD_B6/EBID3

LCD_B5/EBID2

LCD_B4/EBID1

LCD_B3/EBID0

LCD_B2/EBID4 LCD_R3/EBID11

LCD_R4/EBID12

LCD_R5/EBID13

LCD_R6/EBID14

LCD_G0/EBID10

LCD_G4/EBID7 LCD_G5/EBID8

LCD_G6/EBID9LCD_G3/EBID6

LCD_G2/EBID5

0.1uFC27

0.1uFC26

0.01uFC31

0.01uFC30

GND

GND+3.3V

+3.3V

44pin-TSOP

EBIOE/LCD_PCLK

A01

A12

A23

A34

A45

CE6

I/O07

I/O18

I/O29

I/O310

VDD11

GND12

I/O413

I/O514

I/O615

I/O716

WE17

A518

A619

A720

A821

A922 A10 23

A11 24

A12 25

A1326

A1427

A1828

I/O8 29

I/O9 30

I/O10 31

I/O1132

VDD33

GND34

I/O12 35

I/O13 36

I/O14 37

I/O1538

LB39

UB40

OE41

A15 42

A16 43

A17 44U12

IS61WV51216BLL-10TLI

EBICS1

EBIA2

RK1/CAM_DATA1/EBIA1

RK2/CAM_DATA2/EBIA3

EBIA0

EBIA4

EBIA5

EBIA6


EBIA7

EBIA9

EBIWE/LCD_PCLK

LCD_B6/EBID3

LCD_B5/EBID2

LCD_B4/EBID1

LCD_B3/EBID0

LCD_B2/EBID4

LCD_G4/EBID7

LCD_G3/EBID6

LCD_G2/EBID5

SS3/EBIA15




EBIA10

EBIA11

EBIA12

EBIA13

EBIA14

EBIBS1

EBIBS0

LCD_R0/EBID15

LCD_R3/EBID11

LCD_R4/EBID12

LCD_R5/EBID13

LCD_R6/EBID14

LCD_G0/EBID10

LCD_G5/EBID8

LCD_G6/EBID9

0.1uFC28

0.01uFC32

GND

+3.3V

0.1uFC29

0.01uFC33

+3.3V

GND

44pin-TSOP

EBIOE/LCD_PCLK



FIGURE A-9: VGA CAMERA SENSOR AND 2.8V REGULATOR

OVM7690-R20A

DATA4E3

DATA5D3

DATA0B3

DATA7E1

DATA6E2

DOVDD E4

PCLKD1

HREFC1

VSYNCC2

VREF1 A4

VREF2 A3

AGNDC3

AVDD A2

XVCLKD2

PWDNA1

SCLB2

SDAB1

DATA1B4

DATA2C4

DATA3D4

U6

CAM_GND GND

0.1uFC8

0.1uFC7

0.1uFC6

0.1uFC5

DOVDD

AVDD

+3.3V

0.1uFC2

16V10uF

C59

3.3uH

L2

ADJ 4

Vout 5

GND2

SHDN3

Vin1

U7

TC1071

GND

470KR32 3.3uH

L3

3.3uH

L4

0.1uFC3

16V10uF

C60

0.1uFC4

16V10uF

C61

GND

GND

AVDD

348kR33

+2.8V

CAM_GND

TP1

TP3

TP2RA1/ CAM_HREF

RK1/CAM_DATA1/EBIA1

RK2/CAM_DATA2/EBIA3







CAM_PWDN

CAM_VSYNC

OC5/CAM_XVCLK

CAM_SDA

CAM_SCL


DOVDD

AN0/CAM_LDO_SHDN



FIGURE A-10: 24-BIT AUDIO CODEC

0.1uFC14

0.1uFC13

GND

0.1uFC16

16V10uF

C64

FB3

0R

R4

0.1uFC15

GND AGND

SS1/AUDIO_LRCK

SDA2/AUDIO_SDA

REFCLKO1/AUDIO_MCKI

SCL2/AUDIO_SCL

AN5/SDO1/AUDIO_SDTI

MPWR11

LIN1/DMDAT2

RIN1/DMCLK3

PDN4

CSN/SDA5

CCLK/SCL6

CDTIO/CAD07

SDTI8

LRCK9

BICK10

SDTO11

TVDD12

VSS213

MCKI14

MCKO15

I2C16

SVDD17

VSS418

SPN 19

SPP 20

DVDD21

HPL 22

HPR 23PVEE24

VSS325

CP 26

CN 27

AVDD28

VSS129

REGFIL30

VCOM31

LIN3 32

RIN3 33

LIN2 34

RIN2 35

MPWR236

T-P

AD

37

U1

AK4953A

SPP

SPN

HPR

2.2uF10V

C42

2.2uF10V

C41

AGND

2.2uF10V

C40

2.2uF10V

C39

0.1uFC220.1uF

C21

0.1uFC19

0.1uFC20

SVDD

CAVDD

SCK1/AUDIO_BICK

RH3/AUDIO_PDN

AGND

+3.3V

0.1uFC12

16V10uF

C62

FB1

0RR2

0.1uFC11

GND AGND

TVDD

+3.3V

CAVDD

SVDD

TVDD

0.1u

FC

1816

V10

uF

C65

FB

4 0RR

5

0.1u

FC

17

GN

DA

GN

D+1.

8V

+3.3V

+3.3V

+3.3V

+3.3V

DV

DD

DVDD+1.8V

+3.3V

TVDD

VIN

3

GN

D1

VO

UT

2U

10

MC

P17

00T

_180

2E/T

T

1uF

C34

1uF

C35

GN

DG

ND

+3.

3V

+1.

8V O

utpu

t

AGND

MPWR2

LIN2

HPL

TP8

TP7

TP6

TP5


0R

R3

FB2

16V10uF

C63

TP4

AGND

AGND

SPKR OUT

HP OUT

MIC IN

HPL

MPWR2

LIN2

2.2KR31

SPN

SPP

(STEREO)

(STEREO)

(MONO)

1uF

C36

C68

47uF, Tant

C69

47uF, Tant

R27

6.8R

R28

6.8R

R30100R

R29100R

C510.22uF

C500.22uF

HPR

AGND

AGND

5

1

4

3

2

J6

5

1

4

3

2

J5

5

1

4

3

2

J7



FIGURE A-11: BLUETOOTH® TRANSCEIVER

FIGURE A-12: 802.11b/g TRANSCEIVER

NC1

GND2

VDD_AUX3

PIO_04

PIO_35

PIO_16

VDD_DIG7

PIO_48

PIO_29

PIO_510

VDD_PADS11

VREG_EN_RST#12

VDD_IN13

VREG_OUT_HV14

UART_TX15

UART_RX16

UART_RTS17

UART_CTS 18

VDD_RADIO 19

SPI_PCM#_SEL 20

SPI_MOSI 21

CLK 22

SPI_CS# 23

SPI_MISO 24

GN

D25

GN

D26

GN

D27

GN

D28

U2

Bluetooth_BTM805CL2BGND

2.2uF10V

C43

2.2uF10V

C44

2.2uF 10VC45

GND+3.3V

0.1uFC23

2.2uF10V

C47

GND

2.2uF10V

C48

2.2uF10V

C46

GND


AN12/SDO2/U2CTS/BT_CTS

U2RTS/BT_RTS

TP14

TP15

TP16

BT_VREG_EN

SCK3/U2TX/BT_RX

+3.3V

GND

+3.3V

1.0uF

C37

1.0uF

C38

+3.3V

4.7KR16

10K

R22

4.7KR12

4.7KR13

4.7KR14

4.7KR15

INT0/WIFI_INT

SS4/WIFI_CS

SDI4/WIFI_SDO

SCK4/WIFI_SCK/SDI3

RH14/WIFI_SLEEP

TP9

TP10

TP11

TP12

TP13

GND

GND

GND

GND

GND1

NC2

NC3

RESET7

NC8

NC9

GND10

NC11

NC12

NC13

NC14

NC15

WP16

VDD17

GND18 GND 19

HIBERNATE 20

NC 21

NC 22

CS 23

NC24

GND25

DEBUG_RX 26

DEBUG_TX 27

GND 28

VDD 29

GND 30

NC 31

SDO32

INT33

SCK34

SDI35

GND36

NC4

NC5

NC6

U3

MRF24WG0MA-I/RM

RJ0/WIFI_RESET

AN3/SDO4/WIFI_SDI



FIGURE A-13: ACCELEROMETER

FIGURE A-14: TEMPERATURE SENSOR

0.1uF

C10

+3.3V

GND

GND

AN6/ACCEL_XOUT

AN7/ACCEL_YOUT

AN8/ACCEL_ZOUT

NC

1

ST2

COM3

NC

4

COM5COM6COM7

ZOUT8

NC

9

YOUT10

NC

11

XOUT12

NC

13

VS14 VS15

NC

16

EP17

U9 ADXL325

GND

GND

C5247nF

C5347nF

C5447nF

GND3

VOUT 2VDD1

U8

MCP9700T-E/TT

+3.3V

0.1uFC24

GND

0.1uFC25

120R

R34

GND

AN23/TEMP_SENSE



FIGURE A-15: microSD CARD SLOT

FIGURE A-16: TOUCH BUTTONS

2908

-05W

B-M

G

8

5

2

7

6

3

4

1

J8

10KR18

10KR19

10KR20

10KR21 0.1uF

C9

GND

GND

+3.3V

SD_DATA3/SD_CD

SD_DATA2

SD_DATA1

SD_DATA0

SD_CLK

SD_CMD

B2

B1+

_AN0/CAM_LDO_SHDN

RH6/LED4/AN42



FIGURE A-17: PICtail™ CONNECTOR

+3.3V

+3.3V

GND

SS4/WIFI_CS

RA9

SCL2/AUDIO_SCL

SS2

SCL1/TOUCH_SCL

SDA1/TOUCH_SDA

SCK4/WIFI_SCK/SDI3

SCK4/WIFI_SCK/SDI3

SDA2/AUDIO_SDA

1 2

3 4

5 6

7 8

9 10

11 12

13 14

15 16

17 18

19 20

21 22

23 24

25 26

27 28

J2


SS3/EBIA15

SCK1/AUDIO_BICK

SDI4/WIFI_SDO

SS1/AUDIO_LRCK

SS1/AUDIO_LRCK


AN12/SDO2/U2CTS/BT_CTS


AN3/SDO4/WIFI_SDI

AN28/RA10 AN3/SDO4/WIFI_SDI

AN5/SDO1/AUDIO_SDTI

TP18

AN0/CAM_LDO_SHDN

SCK3/U2TX/BT_RXSCK3/U2TX/BT_RX



FIGURE A-18: PUSH BUTTON AND USER CONTROLLED LEDS

Green

D2

Red

D3

Red

D4

Red

D5

Red

D6

Red

D7

GND

470R

R6

470R

R7

470R

R8

470R

R9

470R

R10

470R

R11

+3.3V

S1

RH11/LED5

RH0/LED1

RH1/LED3

RH2/LED2

RA0/PUSH_BUTTON

RH6/LED4/AN42



FIGURE A-19: DISPLAY PANEL CONNECTOR AND BACKLIGHT CIRCUIT

MCP1650S-E/MS

CS3

NC6

FB4

EXT1

GND2

SHDN5

NC7

VIN8

U1

16V10uF

C1

10KR3

GND

GND

LPS3015-153ML

15uHL1

AO3424Q1 7.68K

R2SD107WS-7-F

D1

GNDGND

LED+

470RR4

LED-

10uF35V

C3

0.5R

R1

OC1/LCD_BLENGND

+3.3V

XF2M-4015-1A

38

35

32

29

26

23

20

17

14

11 8 5 239

40

36

37

27

28

30

31

33

34

24

25

15

16

18

19

21

22

12

13 3467910 1

J2

+3.3

V

GN

D

LC

D_R

0

LC

D_R

1

LC

D_R

2

LC

D_R

3

LC

D_R

4

LC

D_R

5

LC

D_R

6

LC

D_R

7

LC

D_G

4

LC

D_G

1

LC

D_G

0

LC

D_G

2

LC

D_G

3

LC

D_G

5

LC

D_G

6

LC

D_G

7

LC

D_B

0

LC

D_B

1

LC

D_B

4

LC

D_B

3

LC

D_B

2

LC

D_B

7

LC

D_B

6

LC

D_B

5

LCD

_PC

LK

LC

D_D

E

LCD

_VS

YN

C

LCD

_HS

YN

C

LC

D_R

ES

ET

LE

D+

LE

D-

LC

D_C

S

16V10uF

C2

GN

D

GN

D



FIGURE A-20: TOUCH CONTROLLER

SDA1

TX172

TX163

TX154

TX145

VSS6

VCAP7

INT8

NC9

RX1210

RX1111

TX1312

TX1213

RX1014

RX915

VSS16

VDD17

RESET18

RX819

RX720

RX621

RX522

RX423

RX324

RX225

RX126

RX027

VDD28

VSS29

TX330

TX231

TX132

TX033

TX434

TX835

TX736

TX637

TX538

VSS39

VDD40

TX941

TX1042

TX1143

SCL44

U2

MTCH6301

0.1uFC5

0.1uFC4

0.1uFC610uF

C7

52271

-067

93

2

4

1

5

6

J3+3.3V

GND

SCL1/TOUCH_SCL

SDA1/TOUCH_SDA

INT1/TOUCH_INT

TOUCH_WAKE

SCL1/TOUCH_SCL

XF

2M-3

015-

1A

29

26

23

20

17

14

11

8

5

2

2728

30

2425

1516

1819

2122

1213

34

67

910

1

J4

T0T1

T2T3

T4T5

T6T7

T8

GND

T9T10

T11T12

T13T14

T15T16

CS0CS1

CS2CS3

CS4CS5

CS6CS7

CS8CS9

T1

T3

T5

T7

T9

T11

T13

T15

CS0

CS2

CS4

CS6

CS8

T0

T2

T4

T6

T8

T10

T12

T14

T16

CS1

CS3

CS5

CS7

CS9

GND

GND GND

+3.3V+3.3V

GND

+3.3V

SDA1/TOUCH_SDA

INT1/TOUCH_INT

MCLR

PICkit Serial AnalyzerConnection

+3.3V

GND

NC1

+V2

GND3

SDA4

SCL5

INT 6

J5 DNP

( DNP )



NOTES:



GUIDE

Appendix B. Bill of Materials

TABLE B-1: MULTIMEDIA EXPANSION BOARD II (MEB II) BILL OF MATERIALSQty. Reference Description Manufacturer Part No.

27 C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27

Cap, Ceramic, 0.1 µF, 50V X7R TDK Corporation C1608X7R1H104M

2 C30, C31 Cap, Ceramic, 0.01 µF, 50V X7R TDK Corporation C1608X7R1H103M

5 C34, C35, C36, C37, C38

Cap, Ceramic, 1 µF, 16V X5R TDK Corporation C1608X5R1C105K

11 C39, C40, C41, C42, C43, C44, C45, C46, C47, C48, C49

CAP CER 2.2 µF 10V 20% X5R 0603 TDK Corporation C1608X5R1A225M/0.80

2 C50, C51 CAP CER 0.22 µF 16V Y5V 0603 Murata Electronics North America GRM188F51C224ZA01D

3 C52, C53, C54

CAP CER 0.047 µF 50V 10% X7R 0603 TDK Corporation C1608X7R1H473K080AA

1 C55 CAP CER 0.022 µF 50V 20% X7R 0603 Murata Electronics North America GRM188R71H223MA01D

10 C56, C57, C58, C59, C60, C61, C62, C63, C64, C65

Cap, Ceramic, 10 µF, 16V X5R Taiyo Yuden EMK212BJ106MG-T

2 C66, C67 CAP CER 22 µF 16V 10% X5R 0805 TDK Corporation C2012X5R1C226K

2 C68, C69 CAP TANT 47 µF 6.3V 20% 1206 Kemet T494A476M006AT

5 R1, R2, R3, R4, R5

RES 0.0 OHM 1/10W 0603 SMD Rohm Semiconductor MCR03EZPJ000

6 R6, R7, R8, R9, R10, R11

RES 470 OHM 1/10W 1% 0603 SMD Rohm Semiconductor MCR03EZPFX4700

5 R12, R13, R14, R15, R16

RES 4.70K OHM 1/10W 1% 0603 SMD Panasonic - ECG ERJ-3EKF4701V

8 R17, R18, R19, R20, R21, R22, R44, R45

RES 10K OHM 1/10W 1% 0603 SMD Stackpole Electronics Inc RMCF0603FT10K0

6 R23, R24, R25, R26, R37, R38

RES 1.10K OHM 1/10W 1% 0603 SMD Panasonic Electronic Components ERJ-3EKF1101V

2 R27, R28 RES TF 6.8 OHM 1% 0.1W 0603 Stackpole Electronics Inc RMCF0603FT6R80

2 R29, R30 Res, 100 Ohm, 1/10W 1% Yageo RC0603FR-07100RL

1 R31 RES 2.20K OHM 1/10W 1% 0603 SMD Rohm Semiconductor MCR03EZPFX2201

1 R32 Res, 470K 1/10W 1% Panasonic - ECG ERJ-3EKF4703V

1 R33 RES TF 348K OHM 1% 0.1W 0603 Stackpole Electronics Inc RMCF0603FT348K

1 R34 Res, 120 Ohm, 1/10W 1% Stackpole Electronics Inc RMCF0603FT120R

1 R36 RES 100K OHM 1/10W 1% 0603 SMD Stackpole Electronics Inc RMCF0603FT100K



5 R39, R40, R41, R42, R43

RES 150 OHM 1/10W 1% 0603 SMD TE 3-1676481-5

1 D1 DIODE SCHOTTKY 1A 100V SMA Micro Commercial Co. SS110-TP

1 D2 LED, SMD, GRN, 0603 package Kingbright Corp. APT1608SGC

5 D3, D4, D5, D6, D7

LED, SMD, RED, 0603 package Kingbright Corp. APT1608EC

1 J1 Hirose FX10_ 168 pin Receptacle_w/ESK MH Hirose Electric Co. Ltd. FX10A-168S-SV

1 J2 CONN FEMALE 28POS DL .1" R/A TIN Sullins Connector Solutions PPTC142LJBN-RC

1 J3 CONN POWER JACK 2.5X5.5MM HI CUR CUI Inc PJ-002BH-SMT

1 J4 CONN HDR 60POS 0.5MM SMD GOLD Hirose Electric Co. Ltd. DF12(3.0)-60DP-0.5V(86)

3 J5, J6, J7 CONN JACK STEREO 5POS 3.5MM SMD Switchcraft Inc. 35RASMT4BHNTRX

1 J8 CONN MINI MICRO-SD 8PIN PCB GOLD Amphenol 101-00581-59

1 J9 CONN HEADER 3POS .100 RT/A SMD Sullins Connector Solutions GBC03SBSN-M89

1 J10 CONN MOD JACK R/A 6P6C SMD Amphenol RJLSE6202101T

1 L1 4.7uH 20% CoilCraft LPS4018-472M

3 L2, L3, L4 INDUCTOR MULTILAYER 3300NH 0603 Abracon Corporation AIML-0603-3R3K-T

4 FB1, FB2, FB3, FB4

FERRITE CHIP 600 OHM 500MA 0805 TDK Corporation MMZ2012Y601B

1 U1 CODEC (24bit Stereo) AKM AK4953A

1 U2 Dual-mode Bluetooth HCI Flaircomm FLC_BTM805

1 U3 TXRX RF 2.4GHZ PCB ANT 802.11B Microchip Technology Inc. MRF24WG0MA-I/RM

1 U4 IC REG BUCK SYNC 5V 2A 16-VQFN Microchip Technology Inc. MCP16322T-500E/NG

1 U5 IC LDO REG 1000MA 3.3V SOT223-3 Microchip Technology Inc. MCP1826S-3302E/DB

1 U6 SENSOR CAMERA CMOS 20CAMERACUBE OmniVision Technologies Inc OVM7690-R20A

1 U7 IC REG LDO ADJ 50MA SOT23A-5 Microchip Technology Inc. TC1071VCT713

1 U8 LP Linear Active Thermistor, SOT-23-3 Microchip Technology Inc. MCP9700T-E/TT

1 U9 Accelerometer ADXL325 Analog Devices Inc ADXL325BCPZ-RL7

1 U10 LDOVoltage Regulator, 1.8V, 250mA Microchip Technology Inc. MCP1700T-1802E/TT

1 U11 SRAM 16M (1Mx16) 10ns Async SRAM ISSI, Integrated Silicon Solution Inc. IS61WV102416BLL-10TLI

1 S1 SWITCH TACTILE SPST-NO 0.05A 12V C&K Components PTS635SK25SMTR LFS

1 GND TP-115*50_SMT Keystone Electronics 5015

TABLE B-2: DISPLAY BOARD BILL OF MATERIALSQty. Reference Description Manufacturer Part No.

1 4.3" Display 4.3" Diplay w/ TP AMTouch USA P3003-02-1-01 Touch Panel/LCD assembly

3 C1, C2, C7 CAP CER 10 µF, 16V X5R Taiyo Yuden EMK212BJ106MG-T

1 C3 CAP CER 10 µF 35V 10% X5R 1206 Taiyo Yuden GMK316BJ106KL-T

3 C4, C5, C6 CAP CER .10 µF 50V X7R 0603 TDK Corporation C1608X7R1H104M

1 D1 DIODE SCHOTTKY 30V 100 mA SOD323 Diodes Inc. SD107WS-7-F

1 J1 CONN RCPT 60 POS 0.5 mm SMD GOLD Hirose Electric Co. Ltd. DF12(30)-60DS-0.5V(86)

1 J2 CONN FPC 40 POS 0.5 mm PITCH SMD Omron Electronics Inc., EMC Div XF2M-4015-1A

1 J4 CONN FPC 30 POS 0.5 mm PITCH SMD Omron Electronics Inc., EMC Div XF2M-3015-1A

1 L1 15 µH ±20% CoilCraft LPS3015-153ML

1 Q1 MOSFET N-CH 30V 2A SOT23 Alpha & Omega Semiconductor Inc. AO3424

1 R1 RES .50 Ohm 1/3W 1% 0805 SMD Susumu RL1220S-R50-F

1 R2 RES 7.68K Ohm 1/10W 1% 0603 SMD Panasonic - ECG ERJ-3EKF7681V

1 R3 RES 10K Ohm 1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT10K0

1 R4 RES 470 Ohm 1/10W 1% 0603 SMD Rohm Semiconductor MCR03EZPFX4700

1 U1 MCP1650-E/MS_BOOST Microchip Technology Inc. MCP1650S-E/MS

1 U2 MTCH6301 Microchip Technology Inc. MTCH6301-I/PT

J3 CONN FFC 6 POS 1 mm R/A ZIF SMD Molex Connector Corporation 52271-0679

J5 PICkit SERIAL ANALYZER_CONN HEADER 6 POS SMT .100 R/A 30 AU

MH1, MH2 0.120 Dia hole, unplated DNP DNP (120 mil unplated hole)

TABLE B-1: MULTIMEDIA EXPANSION BOARD II (MEB II) BILL OF MATERIALS (CONTINUED)Qty. Reference Description Manufacturer Part No.



NOTES:


AMERICASCorporate Office2355 West Chandler Blvd.Chandler, AZ 85224-6199Tel: 480-792-7200 Fax: 480-792-7277Technical Support: http://www.microchip.com/supportWeb Address: www.microchip.com

AtlantaDuluth, GA Tel: 678-957-9614 Fax: 678-957-1455

Austin, TXTel: 512-257-3370

BostonWestborough, MA Tel: 774-760-0087 Fax: 774-760-0088

ChicagoItasca, IL Tel: 630-285-0071 Fax: 630-285-0075

ClevelandIndependence, OH Tel: 216-447-0464 Fax: 216-447-0643

DallasAddison, TX Tel: 972-818-7423 Fax: 972-818-2924

DetroitNovi, MI Tel: 248-848-4000

Houston, TX Tel: 281-894-5983

IndianapolisNoblesville, IN Tel: 317-773-8323Fax: 317-773-5453

Los AngelesMission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608

New York, NY Tel: 631-435-6000

San Jose, CA Tel: 408-735-9110

Canada - TorontoTel: 905-673-0699 Fax: 905-673-6509

ASIA/PACIFICAsia Pacific OfficeSuites 3707-14, 37th FloorTower 6, The GatewayHarbour City, KowloonHong KongTel: 852-2401-1200Fax: 852-2401-3431

Australia - SydneyTel: 61-2-9868-6733Fax: 61-2-9868-6755

China - BeijingTel: 86-10-8569-7000 Fax: 86-10-8528-2104

China - ChengduTel: 86-28-8665-5511Fax: 86-28-8665-7889

China - ChongqingTel: 86-23-8980-9588Fax: 86-23-8980-9500

China - HangzhouTel: 86-571-2819-3187 Fax: 86-571-2819-3189

China - Hong Kong SARTel: 852-2943-5100 Fax: 852-2401-3431

China - NanjingTel: 86-25-8473-2460Fax: 86-25-8473-2470

China - QingdaoTel: 86-532-8502-7355Fax: 86-532-8502-7205

China - ShanghaiTel: 86-21-5407-5533 Fax: 86-21-5407-5066

China - ShenyangTel: 86-24-2334-2829Fax: 86-24-2334-2393

China - ShenzhenTel: 86-755-8864-2200 Fax: 86-755-8203-1760

China - WuhanTel: 86-27-5980-5300Fax: 86-27-5980-5118

China - XianTel: 86-29-8833-7252Fax: 86-29-8833-7256

China - XiamenTel: 86-592-2388138 Fax: 86-592-2388130

China - ZhuhaiTel: 86-756-3210040 Fax: 86-756-3210049

ASIA/PACIFICIndia - BangaloreTel: 91-80-3090-4444 Fax: 91-80-3090-4123

India - New DelhiTel: 91-11-4160-8631Fax: 91-11-4160-8632

India - PuneTel: 91-20-3019-1500

Japan - OsakaTel: 81-6-6152-7160 Fax: 81-6-6152-9310

Japan - TokyoTel: 81-3-6880- 3770 Fax: 81-3-6880-3771

Korea - DaeguTel: 82-53-744-4301Fax: 82-53-744-4302

Korea - SeoulTel: 82-2-554-7200Fax: 82-2-558-5932 or 82-2-558-5934

Malaysia - Kuala LumpurTel: 60-3-6201-9857Fax: 60-3-6201-9859

Malaysia - PenangTel: 60-4-227-8870Fax: 60-4-227-4068

Philippines - ManilaTel: 63-2-634-9065Fax: 63-2-634-9069

SingaporeTel: 65-6334-8870Fax: 65-6334-8850

Taiwan - Hsin ChuTel: 886-3-5778-366Fax: 886-3-5770-955

Taiwan - KaohsiungTel: 886-7-213-7830

Taiwan - TaipeiTel: 886-2-2508-8600 Fax: 886-2-2508-0102

Thailand - BangkokTel: 66-2-694-1351Fax: 66-2-694-1350

EUROPEAustria - WelsTel: 43-7242-2244-39Fax: 43-7242-2244-393Denmark - CopenhagenTel: 45-4450-2828 Fax: 45-4485-2829

France - ParisTel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79

Germany - DusseldorfTel: 49-2129-3766400

Germany - MunichTel: 49-89-627-144-0 Fax: 49-89-627-144-44

Germany - PforzheimTel: 49-7231-424750

Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781

Italy - VeniceTel: 39-049-7625286

Netherlands - DrunenTel: 31-416-690399 Fax: 31-416-690340

Poland - WarsawTel: 48-22-3325737

Spain - MadridTel: 34-91-708-08-90Fax: 34-91-708-08-91

Sweden - StockholmTel: 46-8-5090-4654

UK - WokinghamTel: 44-118-921-5800Fax: 44-118-921-5820

Worldwide Sales and Service

10/28/13

http://support.microchip.com

http://www.microchip.com