m/va9320, m/va9335 series electric non-spring return … provide control of dampers in hvac also...
TRANSCRIPT
3
FEATURES BENEFITS
Automatic Signal Input Detection, On/Off, Floating, and Proportional Control with Adjustable Span and Offset
Increases availability at distributors and simplifies retrofits.
Easy Conversion to Valve Operation - Same Actuator Used for Dampers or Valves Increases availability at distributors with only one actuator to learn.
Optional Accessory Kit
Increases availability at distributors. The auxiliary switch kit provides two line-voltage-capable single-pole, double-throw (SPDT) switches with continuously adjustable switch points, and the auxiliary potentiometer kit provides several potentiometer feedback options. Facilitates safety interfacing or signaling.
Backward Compatible Auxiliary Switch Kits and Auxiliary Potentiometer Allows for a seamless retrofit without the need to replace the controller.
20Nm/35Nm Rated Torque Provides high torque in a compact package size to expand the range of applications in HVAC systems.
Self-Calibrating Input Signal to Adjust Stroke Eliminates the need for a complex calibration procedure when adjusting stops.
VA series actuator use universal linkage Directly installed on JCI ball valve and butterfly valve
M/VA9320, M/VA9335 Series Electric Non-Spring Return Actuators
The M/VA9320, M/VA9335 Series Electric Non-Spring Return Actuators provide control of dampers in HVAC also control of valves with ISO Flange mounting such as VG1000 valve. All actuators in this series provide 20Nm and 35Nm torque.
The series provides Automatic Signal Input Detection, which allows automatic recognition of input signals for on/off, floating, and proportional control.
An optional line voltage auxiliary switch kit can be field installed to indicate an end-stop position or perform switching functions within the selected rotation range. The M9320/M9335 are configured for direct mounting and do not require damper linkage. Actuators can be mounted directly to a damper shaft from 3/4 to 1-1/16 in. (19 to 27 mm) diameter and 5/8 to 3/4 in. (16 to 19 mm) square with a universal clamp.
An accessory crank arm and remote mounting kit are available for applications where the actuator cannot be direct-coupled to the damper shaft.
VA9320/35 can be directly installed on JCI VG1000 ball valve and VF6000 butterfly valve, and the universal linkage brings more flexibility.
Table 1: Features and Benefits (Part 1 of 2)
Figure 1: M/VA9320, M/VA9335 Actuator
4
FEATURES BENEFITS
Electronic Stall DetectionProtects from overload at all angles of rotation. The actuator may be stalled anywhere in its rotation range without the need for mechanical end switches.
Microprocessor-Controlled Brushless DC Motor Provides constant runtime independent of torque and increases lifecycle by reducing wear.
Mode Configuration Switches Permits calibration, input signal range selection, and control logic reversal for proportional control.
Integral Cables with Colored and Numbered Conductors Simplify installation and field wiring.
Small Footprint Allows application in smaller spaces than the M9116/M9124 and M9132 actuators.
M9116, M9124, and M9132 Series Actuators Replacement Simplifies product selection and logistics.
100,000 Cycles and 2.5 Million Repositions Assure long time reliability.
NEMA5/IP54 Enclosure Enhances the range of application environments.
Underwriters Laboratories Inc.® (UL), CE Mark, and RCM Compliance Provides internationally recognized regulatory agency approvals.
Manufactured under International Standards Organization (ISO) 9001 Quality Control Standards Ensures quality.
Table 1: Features and Benefits (Part 2 of 2)
Product DetailsM/VA9320, M/VA9335 Series Actuators operate with 24 VAC/DC or 230VAC to provide 20Nm or 35Nm rated torque. The actuators can be used with on/off, floating, or proportional controllers in HVAC systems that are controlled by an electronic controller or positioner.
Floating control is provided from a triac or relay. On/off control can be provided from a manual switch, controller, auxiliary switch from a fan motor contactor, or similar device.
When the M/VA9320, M/VA9335 Series Actuators are in proportional mode, the actuator responds to 0 to 10 VDC or 2 to 10 VDC control signals. With the addition of a 500 ohm resistor, the actuator responds to a 0 to 20 mA or 4 to 20 mA signal. A 0 to 10 VDC or 2 to 10 VDC feedback signal indicates position.
5
2 31 4RED GRYBLK ORN
OM
500
24 V
AC
/DC
CO
M
2 31 4RED GRYBLK ORN
24 V
AC
/DC
DA DA
CO
M
2 31 4RED GRYBLK ORN
24 V
AC
/DC
2 31 4RED GRYBLK ORN
CO
M
24 V
AC
/DC
24 V
AC
/DC
DA DA
IMPORTANT: Use these M9300 Series Electric Non-Spring Return Actuators only to control equipment under normal operating conditions. Where failure or malfunction of the electric actuator could lead to personal injury or property damage to the controlled equipment or other property, additional precautions must be designed into the control system. Incorporate and maintain other devices, such as supervisory or alarm systems or safety or limit controls, intended to warn of or protect against failure or malfunction of the electric actuator.
Figure 2: On/Off 24 V
Figure 6: On/Off Control
Figure 4: Floating 24 V
Figure 7: Floating Control
M/VA9320, M/VA9335-HGA-x Wiring Diagrams
M/VA9320, M/VA9335-AUA-x Wiring Diagrams
BRNBLU BRNBLUORN2 31
CO
M(-)
85...
264
V A
C
85...
264
V A
C
ORN2 31
CO
M(-)
DA DA DA DA
Figure 3: Proportional 24 V Figure 5: Proportional 24 V - 0 (4) to 20mA
6
Operation
Auto-Calibration Mode
DIP Switches and Status LEDs
M/VA9320, M/VA9335 Series Actuators use a brushless DC motor controlled by a microprocessor. The microprocessor drives the motor at constant speed, independent of torque. The actuator slows down before it reaches its stop position allowing it to coast, further reducing gear wear. The microprocessor also monitors the brushless DC motor’s rotation to prevent damage to the actuator in a stall condition. The actuator can be stalled anywhere within its rotation range without the need for mechanical end switches.
The actuator self-calibrates the control signal when an end stop is adjusted on the stroke. An auto-calibration has to be performed to change the feedback of the actuator.
The auto-calibration mode identifies the available range of travel of the coupler. During the auto-calibration mode, the actuator moves
the coupler to the maximum and minimum end stops to identify the range of travel.
The actuators allow easy setting of the proportional input signals. See the installation instruction for details.
7
Ordering Information
Code Number Rotation Time For 90° Power Requirement Input Signal Position
FeedbackElectrical
Connection
Run
ning
(se
cond
)
24VA
C+/-
20%
24V
DC+
/-10
%
230V
AC
On/
Off
Floa
ting
0(2)
-10V
DC
0(4)
-20m
A
0(2)
-10V
DC
50in
.(1.2
7m)1
8 AW
GM9320-HGA-1VA9320-HGA-3
90 x x x x x x x
M9320-AUA-1VA9320-AUA-3
90 x x x x
M9335-HGA-1VA9335-HGA-3
150 x x x x x x x
M9335-AUA-1VA9335-AUA-3
150 x x x x
Table 2: Selection Chart
8
Table 3: Accessories (Order Separately)
Code Number Description
M9000-323 NEMA 4X, IP66 Weather shield kit
M9000-604 Replacement Anti-Rotation Bracket Kit
M9000-606 Position Indicator (quantity 5)
M9300-1 Auxiliary Switch Kit (1 SPDT)
M9300-2 Auxiliary Switch Kit (2 SPDT)
M9300-100 Threaded Conduit Adapters for 1/2 in. (quantity 5)
M9300-140 External Auxiliary Feedback Potentiometer 140 ohm
M9300-1k External Auxiliary Feedback Potentiometer 1k ohm
M9300-2k External Auxiliary Feedback Potentiometer 2k ohm
M9300-10k External Auxiliary Feedback Potentiometer 10k ohm
9
Dimensions
Figure 8: Dimension
Specifications Part Number M9320-HGA-1/VA9320-HGA-3 M9320-AUA-1/VA9320-AUA-3
Control Type On/off and floating Proportional On/off and floating
Power Requirement 24 VAC ± 20%, 5.7VA24 VDC ± 10%, 2.1 W AC 230 V, 50 Hz:
Transformer Sizing ≥7VA —
Input Signal / Adjustment 24 VAC ± 20% 24 VDC ± 10%
DC0(2)-10Vor0(4)-20mA(field furnished resistor)Offset: DC 0 -10VSpan: DC 2 - 10V
AC 100 - 240 V (AC 85 - 264 V), 50/60 Hz
Control Impedance 4.7kohm 100kohm —
Feedback Signal — DC 0 (2) - 10V —
Running Torque 20 Nm (180 lb•in)
Rotation Time 90 s
Auto Calibration Time 35s
103112
112
10
Part Number M9335-HGA-1/VA9335-HGA-3 M9335-AUA-1/VA9335-AUA-3
Control Type On/off and floating Proportional On/off and floating
Power Requirement 24 VAC ± 20%, 6.1VA24 VDC ± 10%, 2.1 W AC 230 V, 50 Hz:
Transformer Sizing ≥7VA —
Input Signal/Adjustment 24 VAC ± 20% 24 VDC ± 10%
DC0(2)-10Vor0(4)-20mA(field furnished resistor)Offset: DC 0 -10VSpan: DC 2 - 10V
AC 100 - 240 V (AC 85 - 264 V), 50/60 Hz
Control Impedance 4.7kohm 100kohm —
Feedback Signal — DC 0 (2) - 10V —
Running Torque 35 Nm (310 lb•in)
Rotation Time 150 s
Auto Calibration Time 75s
Other Specification M9320/35-HGA-1, M9320/35-AUA-1, VA9320/35-HGA-3, VA9320/35-AUA-3
Position Accuracy 5%
Feedback Accuracy 5%
Cycles 100,000full stroke, 2,500,000reposition (M9320)30,000 full stroke, 750,000reposition (M9335)
Ambient Conditions Operating: -22 to 140°F (-30 to 60°C), 90% RH, noncondensingStorage: -40 to 185°F (-40 to 85°C), 95% RH, noncondensing
Enclosure IP54
Compliance
United States: UL Listed, CCN XAPX, File E27734; to UL 60730-1: Automatic Electrical Controls for Household and Similar Use, Part 1; and UL 60730-2-14: Part 2, Particular Requirements for Electric Actuators. Plenum Rated (UL 2043). Suitable for use in Other Environmental Air Space (Plenum) in accordance with section 300.22 (c) of the National Electrical Code.Canada: UL Listed, CCN XAPX7, File E27734; to CAN/CSA E60730-1:02: Automatic Electrical Controls for Household and Similar Use, Part 1; and CAN/CSA-E60730-2-14, Particular Requirements for Electric Actuators.
Europe: CE Mark – Johnson Controls, Inc. declares that this product is in compliance with the essential requirements and other relevant provisions of the EMC Directive and Low Voltage Directive.IEC 60730-1: Automatic Electrical Controls for Household and Similar Use, Part 1: General Requirements and IEC 60730-2-14, Automatic Electrical Controls for Household and Similar Use; Part 2 - Particular Requirements for Electric Actuators
Australia and New Zealand: RCM, Australia/NZ Emissions Compliant
www.johnsoncontrols.com© Johnson Controls, Inc.
Asia Engineering Centre: Wuxi, ChinaShanghai Distribution Center: Shanghai, ChinaAsia Centre of Excellence in Engineering (CoEE): Beijing, China · Mumbai & Pune, IndiaManufacturing/Assembly: Guangzhou & Wuxi, China · Pune, India
ThailandTel : +66 (2) 794 0101Fax: +66 (2) 717 0861
MalaysiaTel : +60 (3) 7628 4393Fax: +60 (3) 7620 0538
IndonesiaTel : +62 (21) 5366 8500Fax: +62 (21) 5366 8300
AustraliaTel : +61 (2) 9805 8300Fax: +61 (2) 9889 3016
New ZealandTel : +64 (9) 444 6434Fax: +64 (9) 444 2092
JapanTel : +81 (3) 5738 6100Fax: +81 (3) 5738 6298
China (Shanghai)Tel : +86 (21) 2285 7000Fax: +86 (21) 2285 7599
SingaporeTel : +65 6748 0202Fax: +65 6284 3017
KoreaTel : +82 (2) 554 5935Fax: +82 (2) 554 5739
Hong KongTel : +852 2590 0012Fax: +852 2516 5648
MacauTel : +853 2875 1820Fax: +853 2875 1825
IndiaTel : +91 (22) 3082 2200Fax: +91 (22) 3088 1592
Information contained herein including but not limited to the product design, specification or appearance is subject to change without notice. This document is for reference only, please refer to the actual product when buying.
PUBL-XXXX (XXXX)
About Johnson Controls’ Building Technologies & Solutions Johnson Controls’ Building Technologies & Solutions is making the world safer, smarter and more
sustainable – one building at a time. Our technology portfolio integrates every aspect of a building –
whether security systems, energy management, fire suppression, controls or HVACR – to ensure that
we exceed customer expectations at all times. We operate in more than 150 countries through our
unmatched network of branches and distribution channels, helping building owners, operators,
engineers and contractors enhance the full lifecycle of any facility. Our arsenal of brands includes some
of the most trusted names in the industry, such as Tyco®, YORK®, ®, Ruskin®, Titus®,
Frick®, PENN®, Sabroe®, Simplex® and Ansul® and Sensormatic®. For more information, visit
www.johnsoncontrols.com or follow @JCI_Buildings on Twitter.
About Johnson ControlsJohnson Controls is a global diversified technology and multi industrial leader serving a wide range of
customers in more than 150 countries. Our 120,000 employees create intelligent buildings, efficient
energy solutions, integrated infrastructure and next generation transportation systems that work
seamlessly together to deliver on the promise of smart cities and communities. Our commitment to
sustainability dates back to our roots in 1885, with the invention of the first electric room thermostat.
We are committed to helping our customers win and creating greater value for all of our stakeholders
through strategic focus on our buildings and energy growth platforms.For additional information, please
visit http://www.johnsoncontrols.com or follow us @johnsoncontrols on Twitter.
Metasys
PUBL-XXXX (1117)