myt classic · 2017. 11. 15. · myt classic c 146 84 a b myt rectangular section high load...
TRANSCRIPT
MyT classic
C146
84
AB
MyT Rectangular section High Load aluminium truss with extraordinary dimensions; it is 84 cm wide, 146 cm high and 500 cm long, and weighs 430 kg. It is made in high-performance aluminium alloy EN AW-7003 T6, among the aluminium series with the best mechanical characteristics. The truss can be used in large installations intended for entertainment, for temporary and semi-permanent structures. At maximum load spans it undergoes virtually no bending.
Chords A: extruded aluminium EN AW 7003 T6
Diagonals B: extruded aluminium EN AW 7003 T6
Ends C: aluminium forks connector EN AW 7003 T6
Connection system: 11SMnPb37
LINEAR ELEMENTS code cm kg
TR150M-50M-A 84x146x500 430TR150M-50M-G 84x146x500 495
10 1290 12900 20 610 12200 35 310 10850
LOAD TABLE / FORK CONNECTION
UNIF. DISTRIBUTED LOAD
point load full load kg kg
SPANm
109
MYT Preliminary information
Main chords
Braces
Measurements
Max loading capacity (UDL)
Module weight
Coupling system
Emission date: Code:
TECHNICAL SPECIFICATION
extruded profile - aluminum alloy EN AW-7003 T6
extruded profile - aluminum alloy EN AW-7003 T6
pin fork connection
450 Kg
12000 Kg on 35 m
840 mm wide - 1460 height - 5000 mm long
TRUSS03/11/08 TE TR150M-50M
MyT steroid
C
A
B
TRUSSESHIGH LOAD FORK TRUSSES
MYT
Load table has been prepared in accordance with UNI ENV 1999-1-1 (Eurocode 9). When calculating the allowable loads it is assumed that the load is suspended from the bottom chord and the truss is supported from the top chord at each end.
The values shown in the table are the allowable static loads that can be applied to the truss. This is the live load or the payload.The self weight of the truss has been taken into account when calculating the values in the table.
It should be noted that this are idealised loading conditions and the User shall re-analyze the truss for the loading conditions which prevail for the application being considered.
Chords A: extruded aluminium EN AW 7003 T6
Diagonals B: extruded aluminium EN AW 7003 T6
Ends C: aluminium forks connector EN AW 7003 T6
Connection system: 11SMnPb37
It has even better performances in the STEROID version thanks to the double number of diagonals on the vertical faces.
10 2100 21000 20 1020 20400 35 300 10500
LOAD TABLE / FORK CONNECTION
UNIF. DISTRIBUTED LOAD
point load full load kg kg
SPANm