mytee janitorial guide

“1% better in 1,000 ways”

P. 858.679.1191 F. 858.679.7814 13655 Stowe Dr. Poway, CA 92064

Janitorial Guide

2

While Mytee Products, Inc. is a relatively young company, its roots go back decades. After doing janitorial cleaning for several years in the Los Angeles, California area, John LaBarbera started building carpet cleaning machines in his father, Frank LaBarbera’s garage in 1977. The Carpet Jenny Company was thus formed and Frank and John became partners, moving the company to Colorado Springs, Colorado in 1978.

In 1990, the company was sold and the families moved back to California, settling in the San Diego area. In 1994, John started a company centered ona portable water heater product, the Mytee Hot, thus the name Mytee Products. In 1995, carpet cleaning and auto detailing machines were added to the line.

In 2000, Mytee acquired the assets of The Hild Floor Machine Company. Hild’s history goes back an impressive 80 years to 1927 when Fred Hild began building floor machines. In the 1940s, Joseph Roti, who had acquired the Hild company at the time, developed the first shower feed carpet brush that allowed rugs to be cleaned in the home, instead of the inplant cleaning method. Thus, Hild became the originator of On-Site Carpet Cleaning, and the begin-ning of a new innovative industry was born. Mytee Products, a family owned company, is thus also the oldest company in the industry today. And we are proud to be in this industry and of our history.

Our goal is to offer the best quality products with the best customer service and at the lowest price possible.

3

Model Motor Speed RPM Brush/Pad Power Cord Wheels

RD -13 1 hp Single 175 13” 25’ 5”

RD -17 1 hp Single 175 17” 50’ 5”

RD-20 1 hp Single 175 20” 50’ 5”

RD-20 1 hp Single 175 17” 50’ 5”Floor Machines 4 Extractors 10 Sprayer 20 Airmover 22 Specs 24

Contents

4

Floor Machines

5

Not Just another Floor MachineFloor machines have been around for a long time. That longevity is due to the fact that they are workhorse machines that get tough cleaning jobs done quickly. They form the backbone of any good floor maintenance program. However for the most part, floor machines are pretty much the same today as they were 50 years ago.

But not here at Mytee Products - we went back to the drawing board to create the most user friendly, innovative, and different floor machines on the market. We made sure that they were just as robust and durable as their predecessors, while adding features that make them more efficient, easier to use, and more versatile than ever before.

Can a floor machine really be made that much better? We invite you to try us out and decide for yourself.

6

INNOVATIVE FEATURES: • A robust “one-touch” handle adjustment. No bending is ever necessary to adjust the handle height – it’s all done right at the switch box. The piston lock at the bottom is actually stronger and more durable than the friction locking device used on most floor machines.

• An industry-first ambidextrous safety lockout, which makes starting the machine with either hand easy. • A solid steel switch lever, which is almost impossible to break. Never buy a replacement switch lever again.

• An integrated cord wrap, to keep the heavy-duty industrial power cord stored securely.

• A non-marking bumper to protect walls and baseboards from marring.

UltraGlide™

This 1 HP floor machine features a dual planetary gear transmission and a 25’ power cord. At 175 RPM, the UltraGlide™ is perfect for stripping wax floors, scrubbing tile, and other hard surface cleaning tasks.

PowerGlide™The PowerGlide™ series features a robust triple-planetary gearbox, as well as a 1.5 HP motor. This added power allows you to use the floor machine for additional tasks, such as shampooing carpets, bonnet clean-ing, and screening wood floors. It’s 50’ power cord also gives you extended range.

THE INDUSTRY’SBEST FLOOR MACHINES

7

Robust handle locking device - stronger than traditional locks.

Heavy duty shroud with shampoo tank feed.

Speed selection switch on DualGlide™ units.

Optional weighted plate for DiamondHead™ units.

Non-marking heavy-duty wheels.

DualGlide™DualGlide™ machines are extremelyversatile. Use the 175 RPM low speed setting for scrubbing and stripping. Switch to the high speed setting, and you can sand or dry polish at 320 RPM. Not recommended for shampooing.

DiamondHead™The DiamondHead™ can take on thetoughest floor care job – The cleaning, honing, and polishing of stone and concrete surfaces. The super-duty motor is fan cooled to prevent overheating, and sealed to protect it from airborne dust and debris. The weight is perfectly balanced over the center of the pad to ensure an even polish. Weighted models are also available for those who need even more honing power.

THE INDUSTRY’SBEST FLOOR MACHINES

8

• Tethered, no-spill lid for extra large fill port. • Sink-fill attachment allows you to fill directly from a faucet — no bucket needed! • Drain cap allows you to empty the tankwithout removing it. • Clamping system does not penetrate tank, which reduces chance of leaks. Clamps go on and off in seconds for easy removal of tank.

Nylon Shampoo BrushOur top quality nylon carpet brushes are ideal for shampooing carpets and tile when used with Mytee® floor machines. They’re flexible enough to gently scrub carpets, but retain their “memory” for long-term use.

Pad DriverPad drivers handle the toughest carpet and floor cleaning jobs. With hundreds of individual hooks that securely grip the floor pad, it takes on the toughest carpet and floor cleaning jobs. The unit includes a built-in riser and shower feed holes that allow it to be used with our Wave™ shampoo tank.

The Wave™Mytee’s® revolutionary new shampoo tank, is setting a ground breaking industry standard for this longtime carpet-cleaning staple. Never before has a shampoo tank had this many unique, user-friendly features. • Graduated tank for easy mixing of chemicals.• Translucent tank for easy monitoring of solution level.• Universal design allows the Wave™ to be used with almost any floor machine.

Catch the Wave!

INDUSTRY FIRSTS

9

Ambidextrous safety lockout Flexible pad driver with center-lock deviceStrong, easy to use handle adjustment

Mytee-Shine™

Give your floors the finishing touch they deserve with our high-speed Burnisher. Built to last, this tough machine will give you years of service. Its high-quality construction ensures optimal performance and efficiency.

Key Features:

Ease of Operation• Low profile base makes getting under toe kicks easier.• Adjustable height handle fits any operator comfortably.• Low torque design produces brilliant high gloss withminimal effort.• Non-marring bumper protects walls and baseboards.• Quiet operation.

Operator Comfort and Safety• Comfort padded grips.• Ambidextrous safety lockout switch.• 75’ Long power cord for maximum range.• Built in circuit protection.

Durable and Rugged• All metal handle and chassis construction.• Steel switch levers are nearly indestructible.• Belt drive reduces load on bearings and extends motor life.• Non-marking ball bearing wheels.

Powerful Results• 1.5 HP Motor• 1750 RPM• Flexible pad holder with center-lock device.• Delivers excellent gloss performance on a variety offloor surfaces.

Speed kills (the competition)

10

Extractors

11

Why Buy Mytee®?Carpet. Upholstery. Drapes. Tile. Grout. We do it all. Our machines are made to tackle the toughest cleaning jobs you’ll face. Use them for deep periodic cleaning, or for day-to-day spotting and spill cleanup.

Our machines were designed with cleaning professionals in mind. From our smallest upholstery cleaner, to our largest tile & grout cleaning unit, every Mytee® extractor was designed with industry leading features that set them apart from the competition.

All of our machines are built on-site at our California plant. Our machines undergo extensive factory testing to ensure that they meet rigorous quality standards. Mytee® Extractors are covered by the strongest warranty in the industry. The housings are covered for life. Every part has quality built in.

Mytee® Products carpet extractors represent the cutting edge in cleaning technology. No one else even comes close.

12

Front view with hose & upholstery tool Easy drain cap with tether Rear view

Tempo™Don’t let spots become stains!

When a spill happens, it is vital to get to it quickly before it sets in. With this little powerhouse, you can set up, clean up, pack up, and be back at your business in just minutes.

The unit comes complete with an 8’ hose and a tough stainless steel hand tool – not the flimsy plastic tools offered by many competing spotting units. The Tempo™ also features the strongest vacuum motor in it’s class, which helps reduce dry times.

The lightest extractor we make – at only 20 pounds, it’s a breeze to move, carry, and store. With it’s integrated carry handle, it won’t be long before the Tempo™ becomes your first choice for spot and spill response.

13

Front view with hose & upholstery tool Switch plate Rear view

Mytee Lite™Bring on the heat.

Are you looking for an upholstery cleaning machine that can do the job of a full-size extractor, but is small and light enough to hold in one hand? Meet the Mytee-Lite™, the industry’s best-selling upholstery cleaning machine and the first of its size to include an on-board heater for maximum cleaning power.

The Mytee-Lite™ is known industry-wide for its on-board heat, which allows you to quickly break up grease and dirt. The two-stage motor is the most powerful in its class, and makes the extractor even more effective at deep cleaning upholstery.

The unit comes complete with a 15’ hose and a tough stainless steel hand tool. Other features include an easy lift-off vacuum tank, clear-view lids, and a built-in storage basket for cleaning solutions utensils.

Don’t wait! Join the thousands of satisfied customers who have made the Mytee-Lite™ part of their cleaning team.

14

Tracker™One pass cleaning saves time and money.

Have a large area to clean, such as a ballroom, hallway, or conference room? Save time by using the Mytee Tracker™. This self-con-tained carpet cleaner lets you spray, scrub and extract carpets in a single pass.

The Tracker™ features a chevron-style brush with a wide 17” cleaning path perfect for hotels, convention centers, schools, and other large venues.

Equipped with a powerful 3-stage vacuum, a ¼ HP brush motor, and a 120 PSI diaphragm pump, the Tracker™ will leave carpets clean, and nearly dry in no time.

The Tracker™ also features hook-ups for an optional hose and wand or upholstery tool, making it more versatile than competing units.

So for your next big job, order the machine that gets the job done. Get on track with the Tracker™!

15

Contractors Special™The total package.

Everything you need in one package for tackling your toughest carpet and upholstery cleaning jobs. The Contractor’s Special - designed for the busy professional. The “CS” is:• Powerful – It features a 120 PSI diaphragm pump, and powerful vacuum motor.• User-friendly features – Including waist-high switches, easy-open lid, bucket-high drain and non-marking wheels.• Durable – With a tough roto-molded polyethylene housing that resists rusting and denting. Covered by a limited lifetime warranty.

The “CS” includes a 15’ “crush-proof” hose set, as well as a quality 12” stainless steel dual jet carpet wand. All at a price that can’t be beat. Take advantage of this great package deal!

16

Speedster®

Professionals Deserve Professional Equipment.

This Speedster® is powerful, portable, user-friendly and affordable. The 1001DX-200 adds heat and higher pressure to the cleaning equation, making it easier to remove stubborn dirt and spots from carpets and upholstery. It’s long power cords make it easy to find the two separate circuits that are needed to run the machine. Its features lead the industry.

• With a 220 PSI pump, 200˚ heater, and dual 2-stage high performance vacuum motors, its equipped to clean and dry carpets quickly.• Featuring aluminum lift handles for easy transport, an easy-open vacuum tank lid, and waist-high switches to reduce bending. • It also features detachable power cords and a large hanger for storing hoses and cords.• A housing made of tough roto-molded polyethylene that resists rusting and denting.

Find out why the 1001DX-200 Speedster® is such a hot item. Place your order today!

8300-EZ – A high quality, dual jet, 12” carpet cleaning wand.

8500 – 15’ of 1.5” or 8100 – 25’ of 1.5’” crushproof vacuum hose and 1/4” high pressure solution line.

8400 – A quality stainless steel upholstery and spotting tool.

17

Flood ExtractorGet it dry, do it fast. As you know, in a flood situation, getting the water out is priority one. The quicker this is done, the less long term damage is done to materials. The Flood Hog™ is the best tool in the industry for this task, allowing you to move water out of a space rapidly. It leads it’s field with the following features:

• More than twice the non-stop pumping capacity of other flood extractors on the market – While our competitors brag that their extractors pump out 30, 10, or as little as 9 gallons per minute, the 7000 Flood Hog™ continuously discharges 70 GPM! The tank is never full, so you never have to stop mid-job to empty it.• A powerful 3-stage vacuum motor – Surpasses 1- and 2-stage versions featured by other manufacturers. Our motor offers maximum extraction.• An easy-access and timesaving debris filter – Use other extractors and you could find yourself elbow-deep in the tank, pulling out the filter to clean it. Our exclusive fine mesh filter sits on top of the tank so it is visible, pops out with the turn of the hand and keeps debris away from the pump.• Heads that do double-duty – An adjustable flood-wand with a scalloped head for carpets and other textiles; and squeegee head for tile, concrete, stone and other hard surfaces.

Comes complete as shown

On board debris filter EZ lock for pump out hose Manual drain

FeelingSwamped?

18

Prime valve & pressure regulator

MODE 1

Carpet and Upholstery Cleaning

M-SeriesThe M-12 has two unique cleaning modes, to allow you to clean almost every surface in your building!

Dual Modes Get More Done

200 C.F.M. 220 P.S.I. 200˚ Heat With a 220 PSI Solution pump and 200˚ heater, this mode gives you the heat you need to break up tough grease and grime on car-pets, upholstery, and more. The on-board dual circuit indica-tor makes it easy to find the two separate circuits you need to run the unit. It’s 15 gallon tanks give you maximum capacity to finish even the largest of jobs.

Switch plateLarge tank lids

ADD THE OPTIONAL ACCESSORIES YOU NEED FOR YOUR SPECIAL CIRCUMSTANCES:

System Maintainer – Thissolution keeps your pump, hoses, and heaters clean and running trouble free.

EZ Glider A high quality, dual jet, 12” carpet cleaning wand.

Hose Packages 8500 - 15’ of 1.5” crushproof vacuum hose and 1/4” high pressure solution line.8100 - 25’ of 1.5” crushproof vacuum hose and 1/4” high pressure solution line.

Upholstery Tool8400 – A quality stainlesssteel upholstery and spotting tool.

19

Rear view

MODE 2

200 C.F.M.1200 P.S.I.Auto Fill and Pump-out In tile cleaning mode, the M12 gives you 1200 P.S.I. of pressure to blast dirt and grime out of grout lines. The automatic fill and automatic empty feature mean that you won’t have to fill the unit with a bucket on those large jobs – saving you time and money.

Tile and Grout

SpinnerThe Spinner® tile cleaning tool uses high pressure to simultaneously power wash and extract water from tile surfaces. Tough enough to tackle ceramics, stone, and even concrete surfaces.

Corner SpinnerThis mini version of the Spinner® is perfect for getting into corners and other tight spots.

Counter SpinnerThe counter Spinner® allows you to clean counter-tops, walls, shower stalls, and more.

Auto fill and pump out

20

Sprayers

21

Go wireless.

While spraying chemicals and other solutions, it’s hard to be tied to a power cord and electrical outlet. Go wireless with the Big B.O.S.S.™ Battery Sprayer.

This battery-powered unit is designed for continuous heavy-duty use, and offers an on-board battery and universal Intellicharger. It sprays 60 gallons per charge and pumps at 60 PSI.

It also features a 5-gallon lift-off tank for easy filling and draining, a 15’ coiled solution hose and storage basket.

Don’t let that power cord tie you down, put the Big B.O.S.S.™Battery Sprayer to work for you today!

Sidekick™ bottleUsed for auxiliary chemical storage or dispensing with the BIG B.O.S.S. and Electric Sprayer.

Electric SprayerDon’t let its small size fool you!

This compact, lightweight, 3-gallon unit is a powerhouse when it comes to answering your chemical dispensing, pre-treating, or any other spraying needs.

This versatile unit offers superior:• Performance – The unit runs on 115 volts and features a120-PSI Viton pump.• Convenience – Includes a 3-gallon tank, easy-grip handle with storage basket, 15’ coiled solution hose and gun, and 25’ power cord.Be ready for any spraying job with the 6001 Electric Sprayer.

BATTERY OPERATEDSOLUTIONSPRAYER

22

Airmover

23

Stackable Easy Storage or Transport

AirmoverWet floors present a slip hazard, a breeding ground for mold, and can cause odor problems. Get them dry fast with the 2200H Mytee-Dry™. With its attached, collapsible handle, you’ll move this blower in and out of your drying area in no time. Ideal for drying floors, carpets or anytime ventilation is needed.

• Powerful – The 2-speed motor features a maximum speed of 2200 CFM to dry floors quickly.• Versatile – It adjusts to three positions to dry walls, ceilings, carpets, floors and other surfaces.• Transport and storage friendly – Units move easily from job to job with our unique stacking system. Custom-made, luggage-style

handles also make transport a snap.• Durable – With simple maintenance, this blower will be a top performer for years to come. Each unit has a tough roto-molded polyethylene housing. Escort dollyOur optional, positive-locking, Escort™ dolly clicks into place,allowing you to move up to three blowers at once.

24

Model RD-13 RD-17 HD-17 HD-20 DS-17 DS-20 SD-17 SD-20 SD-17W SD-20W B-1750 G051 G054 G044 G045

Motor

Single speed, 120 volts, 66 frame, UL listed

1.0 HP, single speed,

120 volts, 66 frame, UL listed





1.5 HP, dual speed, 120 volts, 66 frame, UL listed


1.5 HP, high-torque, fan-cooled,

sealed, single speed,






sealed, single speed, 120 volts,

66 frame, UL listed

1.5 HP, high-torque, fan-

cooled, sealed,

single speed, 120 volts, 66 frame, UL listed



Filament Dia.

.025/.028

Filament Dia.

.025/.028NA NA

Brush/PadSize 13”,

speed 175 RPMSize 17”,




speeds 175/320 RPMSize 20”,






speed 1750 RPMSize17”

Size20”

Size17”

Size20”

Gear BoxSolid-steel, heavy-duty,

dual-planetarySolid-steel, heavy-duty,


triple-planetarySolid-steel, heavy-duty,






triple-planetarySolid-steel, heavy-

duty, triple-planetaryNA/Belt drive

NA NA NA NA

Power Cord 25’ 25’ 50’ 50’ 50’ 50’ 50’ 50’ 50’ 50’ 75’

ArmCollapsible, ergonomic,

one-touchheight adjustment

Ergonomic, one-touchheight adjustment








Ergonomic, one-touch

height adjustment


height adjustment

Switch Operation

Ambidextrous dual-lever on/off safety









Ambidextrous dual-lever

on/off safety


on/off safety

Wheels 5” 5” 5” 5” 5” 5” 5” 5” 5” 5” 5”

Machine Weight

Coming Soon 95 lbs. 103 lbs. 111 lbs. 89 lbs. 92 lbs. 115 lbs. 119 lbs. 134 lbs. 149 lbs. 92 lbs. 4.5 lbs. 6.3 lbs. 4 lbs. 5.5 lbs.

Machine Dimensions

Coming Soon 24” x 17” x 46 1/2” 24” x 17” x 46 1/2” 24” x 20” x 46 1/2” 24” x 17” x 46 1/2” 24” x 20” x 46 1/2” 24” x 17” x 46 1/2” 24” x 20” x 46 1/2” 24” x 17” x 46 1/2” 24” x 20” x 46 1/2” 31 1/2” x 20” x 45” 17” 20” 17” 20”

Shipping Weight

Coming Soon 107 lbs. 116 lbs. 118 lbs. 100 lbs. 104 lbs. 127 lbs. 130 lbs. 147 lbs. 163 lbs. 117 lbs. 5.2 lbs. 7.3 lbs. 4.8 lbs. 6.5 lbs.

Shipping Dimensions

Coming Soon 24” x 21” x 50” 24” x 21” 50” 24” x 21” x 50” 24” x 21” x 50” 24” x 21” x 50” 24” x 21” x 50” 24” x 21” x 50” 24” x 21” x 50” 24” x 21” x 50” 37 1/2” x 20” x 51”16 1/4” x 16 1/2” x

3 1/2”

21” x 20 3/4” x

3 1/2”

16 1/4” x 16 1/2” x

3 1/2”

21” x 20 3/4” x

3 1/2”

*ST-4 The Wave™, Mytee’s® revolutionary new shampoo tank. Features graduated translucent 4-gallon tank for precise measuring, big-mouth fill port for easy fill-up, built-in hose that connects to standard sink faucet, rear-tank drain, quick-release clamp system, tethered lid and universal design.

13” UltraGlide™ 17” UltraGlide™ 17” PowerGlide™with Wave™

20” PowerGlide™ 17” DualGlide™ 20” DualGlide™

All specifications are subject to change without notice.

25

Model RD-13 RD-17 HD-17 HD-20 DS-17 DS-20 SD-17 SD-20 SD-17W SD-20W B-1750 G051 G054 G044 G045

Motor

Single speed, 120 volts, 66 frame, UL listed
















sealed, single speed, 120 volts,

66 frame, UL listed

1.5 HP, high-torque, fan-

cooled, sealed,

single speed, 120 volts, 66 frame, UL listed



Filament Dia.

.025/.028

Filament Dia.

.025/.028NA NA

Brush/PadSize 13”,











speed 1750 RPMSize17”

Size20”

Size17”

Size20”

Gear BoxSolid-steel, heavy-duty,









triple-planetarySolid-steel, heavy-

duty, triple-planetaryNA/Belt drive

NA NA NA NA

Power Cord 25’ 25’ 50’ 50’ 50’ 50’ 50’ 50’ 50’ 50’ 75’

ArmCollapsible, ergonomic,

one-touchheight adjustment










height adjustment


height adjustment

Switch Operation











on/off safety


on/off safety

Wheels 5” 5” 5” 5” 5” 5” 5” 5” 5” 5” 5”

Machine Weight

Coming Soon 95 lbs. 103 lbs. 111 lbs. 89 lbs. 92 lbs. 115 lbs. 119 lbs. 134 lbs. 149 lbs. 92 lbs. 4.5 lbs. 6.3 lbs. 4 lbs. 5.5 lbs.

Machine Dimensions

Coming Soon 24” x 17” x 46 1/2” 24” x 17” x 46 1/2” 24” x 20” x 46 1/2” 24” x 17” x 46 1/2” 24” x 20” x 46 1/2” 24” x 17” x 46 1/2” 24” x 20” x 46 1/2” 24” x 17” x 46 1/2” 24” x 20” x 46 1/2” 31 1/2” x 20” x 45” 17” 20” 17” 20”

Shipping Weight

Coming Soon 107 lbs. 116 lbs. 118 lbs. 100 lbs. 104 lbs. 127 lbs. 130 lbs. 147 lbs. 163 lbs. 117 lbs. 5.2 lbs. 7.3 lbs. 4.8 lbs. 6.5 lbs.

Shipping Dimensions

Coming Soon 24” x 21” x 50” 24” x 21” 50” 24” x 21” x 50” 24” x 21” x 50” 24” x 21” x 50” 24” x 21” x 50” 24” x 21” x 50” 24” x 21” x 50” 24” x 21” x 50” 37 1/2” x 20” x 51”16 1/4” x 16 1/2” x

3 1/2”

21” x 20 3/4” x

3 1/2”

16 1/4” x 16 1/2” x

3 1/2”

21” x 20 3/4” x

3 1/2”

*ST-4 The Wave™, Mytee’s® revolutionary new shampoo tank. Features graduated translucent 4-gallon tank for precise measuring, big-mouth fill port for easy fill-up, built-in hose that connects to standard sink faucet, rear-tank drain, quick-release clamp system, tethered lid and universal design.

17” DiamondHead™ 20” DiamondHead™20” Mytee-Shine™

Shampoo Brush

17” DiamondHead™ (weighted)

20” DiamondHead™ (weighted)

Pad Driver


26

Tempo™ Mytee-Lite™ ll Tracker™ Contractor’s Special™

Speedster™ M-Series™ Flood Hog™ System Maintainer™

Model S-300 8070 SC-9 2000CS 1001DX-200 M-12 7000 3601

BodyRoto-molded polyethylene

Roto-molded polyethylene






NA

Tank 1.5 Gal. 3 Gal. 9 Gal. 11 Gal. 12 Gal. 15 Gal. 12 Gal.1 quart

(12 case)

Vacuum 1-2 St 1-2 St 1-3 St 1-3 St 2-2 St HP 2-2 St HP 1-3 St HP

NA

CFM 97 97 100 100 200 200 115

H20 85” 85” 137” 137” 107” 107” 137”

Pump Solenoid Diaphragm Diaphragm Diaphragm Diaphragm Piston/Diaphragm Pump-out

PSI 55 120 120 120 220 50-1200/220 NA

GPM .37 1.3 .6 .6 1.35 1.35 70

Motor NA NA 1/4 HP NA NA NA NA

Heater NA 1000 W. NA NA 2000 W. 2000 W. NA

CleaningPath

NA NA 17” NA NA NA NA

Wheels 3” 6” 12” 8” 12” 12” 10”

Casters NA 2” NA 3” 5” 4” 4”

Tools Included

8’ hose,upholstery tool


NA15’ hose,

floor wandNA NA

Dual 25’ hoses,flood wand with

dual heads

Cord Single 25’ Single 25’ Single 50’ Single 25’ Dual 50’ Dual 50’ Single 25’

Machine Weight

20 lbs. 48 lbs. 104 lbs. 79 lbs. 94 lbs. 168 lbs. 94 lbs.

Machine Dimensions

20” x 10” x 16 1/2” 10” x 13” x 28 1/2” 45” x 17 1/2” x 38 3/4” 28” x 17 3/4” x 37 1/2” 28” x 18 1/4” x 40” 37 1/4” x 19 1/2” x 43” 28” x 17 1/2” x 36 1/2”

ShippingWeight


Shipping Dimensions

19” x 10 3/4” x 20” 23 1/4” x 15 1/2” x 36 1/2” 46” x 19 1/4” x 41 1/2” 29 3/4” x 19” x 46 1/4” 29 1/2” x 19 1/4” x 46 1/2” 37 1/4” x 21” x 50 3/4” 29 1/2” x 19” x 47”


27

T Spinner™ CornerSpinner™

Vacuum/Sol.Hose

System Maintainer™

Escort™Mytee-Dry™

EZ Glider™ UpholsteryTool

Counter Spinner™

Electric Boss™Sidekick™BIG B.O.S.S™

Model 6002 SK-4 6001 2200H 2202

Tank 5 Gal. 4 quarts 3 gal. NA NA

Volts 12 Amp. / 10 Amp. Hr. NA 115 V. 115 V. NA

Spray per charge 60 Gal. NA NA NA NA

PSI 60 NA 120 NA NA

HP NA NA NA 1/3 NA

Amp draw NA NA NA 3.5 high, 2.4 low NA

Speeds NA NA NA 2 (low/high) NA

Wheels 8” NA 8” 4” 6”

Machine weight 43 lbs. 2.4 lbs. 29 lbs. 33 lbs. 19.4 lbs.

Machine dimensions 20 1/2” x 13” x 37” 11 1/4” x 4 1/2” x 10” 16 1/2” x 12 1/2” x 37” 20” x 17” x 18” 16 1/2” x 16 5/16” x 65 5/8”

Shipping weight 48 lbs. 4 lbs. 34 lbs. 37 lbs. 25.3 lbs.

Shipping dimensions 21” x 14” x 38” 11 1/4” x 11 1/4” x 9 1/4” 21” x 14” x 38” 19 3/4” x 17 1/4” x 19”Box one - 4 1/2” x 4 1/4” x 71”

Box two - 19 3/4” x 17 1/4” x 19”

Model S-300 8070 SC-9 2000CS 1001DX-200 M-12 7000 3601

BodyRoto-molded polyethylene







NA

Tank 1.5 Gal. 3 Gal. 9 Gal. 11 Gal. 12 Gal. 15 Gal. 12 Gal.1 quart

(12 case)

Vacuum 1-2 St 1-2 St 1-3 St 1-3 St 2-2 St HP 2-2 St HP 1-3 St HP

NA

CFM 97 97 100 100 200 200 115

H20 85” 85” 137” 137” 107” 107” 137”

Pump Solenoid Diaphragm Diaphragm Diaphragm Diaphragm Piston/Diaphragm Pump-out

PSI 55 120 120 120 220 50-1200/220 NA

GPM .37 1.3 .6 .6 1.35 1.35 70

Motor NA NA 1/4 HP NA NA NA NA

Heater NA 1000 W. NA NA 2000 W. 2000 W. NA

CleaningPath

NA NA 17” NA NA NA NA

Wheels 3” 6” 12” 8” 12” 12” 10”

Casters NA 2” NA 3” 5” 4” 4”

Tools Included



NA15’ hose,

floor wandNA NA

Dual 25’ hoses,flood wand with

dual heads

Cord Single 25’ Single 25’ Single 50’ Single 25’ Dual 50’ Dual 50’ Single 25’

Machine Weight


Machine Dimensions

20” x 10” x 16 1/2” 10” x 13” x 28 1/2” 45” x 17 1/2” x 38 3/4” 28” x 17 3/4” x 37 1/2” 28” x 18 1/4” x 40” 37 1/4” x 19 1/2” x 43” 28” x 17 1/2” x 36 1/2”

ShippingWeight


Shipping Dimensions

19” x 10 3/4” x 20” 23 1/4” x 15 1/2” x 36 1/2” 46” x 19 1/4” x 41 1/2” 29 3/4” x 19” x 46 1/4” 29 1/2” x 19 1/4” x 46 1/2” 37 1/4” x 21” x 50 3/4” 29 1/2” x 19” x 47”

Model 8904 8907 8908 8300 EZ 8400 8100 8500

Size 12” 9 1/2” 7 3/4” 12” 3” NA NA

Handle T style Wand Hand tool Wand Hand tool NA NA

Tube diameter 1 1/2” 1 1/2” 1 1/2” 1 1/2” 1 1/2” NA NA

Min. PSI 500 500 500 NA NA NA NA

Swivel Carbide Carbide Carbide NA NA NA NA

Jets Dual Dual Dual Dual Single NA NA

Jet size 1501 1501 1501 11002 9502 NA NA

Brush 12” replaceable 6” replaceable 6” replaceable NA NA NA NA

Rated to 3000 psi 3000 psi 3000 psi 3000 psi 3000 psi NA NA

Length NA NA NA NA NA 25’ 15’

Vac. hose dia. NA NA NA NA NA 1 1/2” 1 1/2”

Sol. hose dia. NA NA NA NA NA 1/4” 1/4”

Machine weight

15.5 lbs. 13.6 lbs. 7.2 lbs. 8.1 lbs 1.8 lbs. 11.7 lbs. 6.8 lbs.

Machine dimensions

19” x 14 1/2” x 49” 13 1/2” x 9 1/2” x 51” 11” x 9” x 9” 15 1/2” x 12” x 58 3/4” 12” x 4” x 3 3/4” NA NA

Shipping weight


Shipping dimensions

23” x 14” x 51 1/4” 12 1/2” x 12 3/4” x 53” 13 1/4” x 13” x 10 1/2” 10 1/4” x 10 1/4” x 61 1/2” 8 1/4” x 8 1/4” x 23”17 1/2” x 19”

x 17 1/2”17 1/2” x 19”

x 17 1/2”


visitwww.mytee.com

AD-JC REV211

mytee janitorial guide

Documents

carpet cleaning machines

hild company

different floor machines

floor machinefloor machines

hild floor machine company

workhorse machines

carpet jenny company

young company