national conference 2019 - cms.laxmi.edu.in€¦ · national conference 2019 the basic objective of...
TRANSCRIPT
National Conference 2019
The basic objective of the scheme is to bring together academicians and experts from different parts of the
country and abroad to exchange knowledge and ideas. This will provide an in-depth analysis of subjects
and update the knowledge of the participants from academic/research institutions. Selected papers will be
published in UGC approved journal with ISSN number. The conference will be held on 02nd
April 2019.
Venue for the conference is Laxmi Institute of Technology, Sarigam, Gujarat.
Outcomes:
To Establish a network of young researchers, Students and industry experts who will be able to work
together to find creative solutions to the issues facing the recent times.
To provide an opportunity for youth to present their concerns regarding and solutions to issues facing
in and in resulting conference reports.
Increase general inquisitiveness among youth and the general public.
IMPORTANT DATES
Submission of Manuscript deadline: March 15, 2019
Acceptance notification: March 20, 2019
Submission of camera ready paper: March 22, 2019
Last Date of Registration: March 25, 2019
Date of Conference: April 02, 2019
In Association with
Criteria for Publication
The authors are requested to go through the following criteria for publication of their Research papers:
Ranking of papers will be done out of 20 marks on the following basis:
a. Paper Acceptance out of 10 marks :
strongly accepted: (8-10)/10
accepted: (6-7)/10
weakly accepted: (0-5)/10
b. Physical Presentation out of 10 marks (as per the session chair(s) decision)
strongly presented: (8-10) /10
normally presented: (6-7) /10
weakly presented: (4-5) /10
very weakly presented: (0-3) /10
The best papers evaluated on the basis of their acceptance and physical presentation of the papers
will be considered for publication in UGC approved Journal. For this the overall marking of the
paper should be between 15-20 marks.
The next best papers in category on the basis of their evaluation , will be published in UGC approved
journals: IJAC (Journal of analysis and computation) .
Registration Charges :-
Category Authors
UG Students Rs. 1000/-
PG Students Rs. 1200/-
Academicians / R & D Institutions Rs. 1500/-
Delegates from Industries Rs. 2000/-
Download Registration from here NCETET_Registration_Form
Standard Paper size – 6 pages.
Research Student Author - Those authors who are currently pursuing PHD, Masters degree in a
research organisation/University comes under this category
At least one author must be registered for paper registration.
Event is maintained and managed by Laxmi Institute of Technology, in association with Gujarat
Technological University, Ahmedabad, ISTE, New Delhi.
Registration fee may be paid through DD in favor of “Laxmi Institute of Technology, Sarigam”
payable at Silvassa or by Online Transfer/Cash
Fee inclusive of Service and other Taxes.
Bank Details
Paper Submission
Authors are requested to submit their Research Paper through easychair. Paper should have an Abstract of
200 words, 4-6 Key Words, Figures, Diagrams, Tables, Graphs and Reference in prescribed Format and
Full Length of Paper not more than 7 Pages. Authors have to follow the Dates as mentioned.
Papers Selected in NCETET 2019 will be considered for Publication in UGC approved Journals:
http://www.ijrar.org [ISSN: 2349-5138 (Print Version); ISSN: 2348-1269 (Electronic Version), UGC No.
43602]
The submissions are handled through the official Easy Chair:
Author Guidelines
Prospective authors are invited to submit manuscripts reporting original unpublished research and recent
developments in the topics related to the conference. It is required that the manuscript follows the standard
format mentioned. Submissions must include title, abstract, keywords, author and affiliation with email
address. Please double-check the paper size in your page setup to make sure you are using the A4 size
paper. The paper should not contain page numbers or any special headers or footers.
Authors should submit their papers online. We use Easy Chair system for submission of papers and review
process. Unregistered authors should first create an account on Easy Chair to log on. To avoid last minutes
network problems, authors are strongly encouraged to create their Easy Chair submission system user
accounts (if you do not already have one) and register their submission well in advance of the deadline.
Authors are invited to submit full papers for consideration with a maximum length limit of 6 printed pages
including all the figures, references, and appendices. Submission of paper must be original and should not
have been previously published or under consideration for publication. All papers will be sent for peer
review and the corresponding author will be notified of the outcome of the review process. At least one of
the authors of each accepted paper must register for the conference and present their paper in person at the
conference. All submissions are to be done electronically through easychair link.
Tentative Schedule
Time Program Venue
09.00-09.45 Registration and morning break Dhwani Auditorium & Tasty Spoon
010.00-10:10 Inauguration Dhwani Auditorium
10:10-10.20 Welcoming speech by Director Dhwani Auditorium
10: 20 – 10:25 Welcoming speech by Convener Dhwani Auditorium
10:25 – 10: 40 Keynote speech Dhwani Auditorium
10:40 – 10:45 Announcement of parallel session Dhwani Auditorium
11.00 - 13:30 Parallel Session I Seminar Hall - Civil
11.00 - 13:30 Parallel Session II Seminar Hall - Mech
11.00 - 13:30 Parallel Session III Seminar Hall – EC
13:30 – 2:30 Lunch Tasty Spoon
2:30 – 3:30 Valedictory Ceremony Dhwani Auditorium
Important Dates
IMPORTANT DATES
Submission of Manuscript deadline: March 15, 2019
Acceptance notification: March 20, 2019
Submission of camera ready paper: March 22, 2019
Last Date of Registration: March 25, 2019
Date of Conference: April 02, 2019
Venue: Laxmi Institute of Technology, Sarigam , Gujarat
About LIT, Sarigam
Laxmi Vidyapeeth Engineering College is temple of learning is located nearby Vapi Valsad a sprawling
120 acres campus with facilities to match the imaginations of the elites. In a serene environment away
from the city, the lush green atmosphere of Laxmi Vidyapeeth provides the students a system that is a
perfect blend of modern techniques and traditional values facilitating the enhancement of their physical,
mental, social and spiritual values, because of all these Facilities Laxmi Vidyapeeth gain a reputation in
Vapi Valsad and is now identified as leading engineering College in Vapi & Valsad District.
To meet the demand of engineering education in India, particularly in Gujarat, Laxmi Institute of
Technology (LIT) was established in the year 2009, in a lush green and quaint campus. The college is
approved by AICTE, New Delhi and offers the following courses:
Degree :
Diploma :
Read More >
Committee
ORGANIZING COMMITTEE
PATRON
Dr. Basavaraj Patil , PhD ( IIT-M )
Director, Laxmi Institute of Technology
CONVENER
Dr. R. Anjana, Asst. Prof / EE
Prof. Ashish Patel, Asst. Prof / Mech
REVIEW COMMITTEE
Prof. Kevin Bhandari, Asst. Prof / Mech
Prof. Fanil Desai, Asst. Prof / Mech
Prof. Bhavesh B Patel, Asst. Prof / Auto Prof. Vimal Tandel, Asst. Prof / Auto
Prof. Rahul Jadav, Asst. Prof / EE
Prof. Biraja P Das, Asst. Prof / EE
Prof. Priyanka Patel, Asst. Prof / ECE
Prof. Amitkumar Chauhan, Asst. Prof / Civil
Prof. Ravi Patel, Asst. Prof / Civil
Prof. Ritu Singh, Asst. Prof / Civil
Prof. Bhavesh K Patel, Asst. Prof / CSE
Prof. Farzin Shaikh, Asst. Prof / CSE
Prof. Manthan Surti, Asst. Prof / IT
Prof. Kashyap Parmar, Asst. Prof / IT
COORDINATORS
Prof. Amrat Patel, Principal, LIT (Diploma)
Prof. Suchita Borkar, HOD / ECE
Prof. Parikshit Patel, HOD / Mech
Prof. S. Kannan, HOD / EE
Prof. Pinal Hansora, HOD / CSE
Prof. Viralkumar Prajapati, HOD / IT
Prof. Chirag Shah, HOD / Civil
Prof. Keval Patel, HOD / Auto
Prof. Gaurav Gandhi, HOD / GD
Prof. Martin Patel, HOD / Auto (Diploma)
Prof. Luish Patel, HOD / EE (Diploma)
Prof. Aamirhamza, HOD / Civil (Diploma)
Prof. Krunal Dhivar, HOD / Mech (Diploma)
Prof. Bhargav Desai, HOD / GD (Diploma)
About Conference
The basic objective of the scheme is to bring together academicians and experts from different parts of the
country and abroad to exchange knowledge and ideas. This will provide an in-depth analysis of subjects
and update the knowledge of the participants from academic/research institutions.
Outcomes:
To Establish a network of young researchers, Students and industry experts who will be able to work
together to find creative solutions to the issues facing the recent times.
To provide an opportunity for youth to present their concerns regarding and solutions to issues facing
in and in resulting conference reports.
Increase general inquisitiveness among youth and the general public.
Our Keynote Speakers
Dr. K. N. Mistry, Dean, GTU, Zone 5 and Principal, GIDC Engineering College, Navsari
Mr. Jigar Patel, CEO, Softyoug, Vapi
Mr. Sunil Keluskar, CEO, Omkar group of Industries,
Mr. P. S. Karath, Technical Consultant, Vapi
Mr. Mehernose - Marketing Head, IBL, Vapi
NCETET 2018 Published paper
All accepted and presented papers at NCETET 2018 conference published in the following International
Journals:
International Journal of Emerging Technology and Advanced Engineering.
https://ijetae.com/Conference_LIT_2018.html
In Association with
Volume 8, Special Issue 4, April 2018 ( ISSN 2250 – 2459 (Online))
An ISO 9001:2008 Certified, UGC Approved Journal
S.No. Title of Paper
Page No.
1. Advance Power Optimization and Monitoring Technique for Cooling Tower in Steam Power Plant Authors: Amit Sinha, Dhananjay Yadav, Ragini Nayakwade, Hiren Patel
1-2
2. Automation of Substation and Fault Detection Using PLC and SCADA with System Restoration Scheme Authors: Pratik Champaneri, Firoz Ali, Mrugnesh Kadu, Digvijay Patel
3-10
3. Design an Efficient System for Improving Solar Power Utilization Authors: Sourabh Shrivastav, Manan Rawal, Sanjay Prajapati, Dipak Kori, Sita Singh
5-7
4. A Novel Toxic Gas Detection System for Industry with Enhanced Power Tripping & Exhausting Methodology Authors: Parth Pandya, Kajal Rathod, Pareen Prajapati, Saddam Saiyed, S.Kannan
8-9
5. mobiMOOC: A Personal Tutor For Modern ICT Authors: Dr. R. Anjana, Suchita Borkar
10-14
6. Rail Track Cleaner (RTC) Authors: Vora Mazhar, Kinjal Patel, Nileswari Patel, Dr. R. Anjana
15-24
7. Smart Technology Safety Helmet Authors: Ingle Paras, Patel Nikhil, Tiwari Saurav, Mishra Pawan, S. Kannan
25-27
8. Advance Menu & Ordering System Using PLC” Authors: Shankar Tadvi, Yash Koli, Vimal Nayka, Bhavin Patel, Hiren Patel
28-30
9. Swar-“A Voice of Disable” Authors: Kavita Joshi, Preeti Maurya, Aiswarya Nair, Pragathi Peyyala, Pallavi Borse
31-34
10. E-Helping Hand Writer Authors: Priyanka Bariya, Mitali Kamli, Unnati Mahyavanshi, Reena Savaliya
35-38
11. Switch Automation System Using Arduino Authors: Preeti Maurya, Krunal Rathod, Hardik Waghela, Krunal A. Gandhi
39-42
12. PC Controller Using Wi-Fi Authors: Hina Patel, Vibhuti Mangela, Viral Prajapati
43-45
13. THE" Binder Authors: Manthan Surti, Aishwarya Guntoju, Mahima Patel, Neelima Roy, Amit Viramgami
46-48
14. To Predict and Measure the Success Possibility of Lean Six Sigma Adoption in Foundary Shops of Valsad Region Authors: Anand Ahir, Alok Choudhary, Ashish Patel
49-54
15. Development of Framework for Enhancing Adoption of Lean Manufacturing in Medium Scale Industries of Valsad Region Authors: Mayur Patel, Alok Choudhary, Ashish Patel
55-60
16. Conversion of Waste Plastic into Fuel Authors: Abhishek Bhandari, Kashyap Bhavsar, Vatsal patel Amin Rashiyani
61-63
17. Modelling And Modification Of Cafe Racer Bike - A Review Authors: Miraj Bhavsar, Jenish Modi, Bhavesh Patel
64-66
18. The Experimental Study of Single Cylinder Four Stroke Spark Ignition Engine using Biogas as a fuel: A Review Study Authors:Saket Singh, Chirag Sharman, Jigar Bhanushali, Dhavan Sharma
67-68
19. Car Parking System Authors:Tulsika Haresh Raval, Feba Daniel, Hemanshi Dilipbhai Patel, Rensi Kalavadia
69-71
20. Smart Market Authors: Rahul R Pandey, Anjani N Halpati, Prachi R Kakade, Prachi R Gite
72-75
21. Daily Wages Labour Helping Application Authors: Prachi D. Patel, Parthi P. Patel, Rinal N. Damnia, Mahima R. Salunke, Bhavesh K. Patel
76-79
22. Verify My Seat Authors: Nidhi Rohit Oza, Srushti Dange, Khusboo L. Singh, Pinal M. Hansora
80-83
23. City Guidance Authors: Vini Ravindra Kopardekar, Rajshree Ashok Jawale, Urvi Prabhakar Talekar, Pragati Krishna Tiwari, Pinal M. Hansora
84-87
24. Digital College Authors: Mohit Gond, Falguni Tambekar, Chiranjita Das, Pinal M. Hansora
88-90
25. Intelligent Announcement & Bell System For Educational Institutes Authors: Sargam. M. Chauhan, Neel. A. Pardeshi , Raj. D. Pandey, Anuj. L. Yadav, Sanjeet Kumar Shriwastava
91-95
26. Smart Service Technology for Hotel, Resort and Restaurant Authors: Apexa Patel, Zankruti Arya, Mayank Damania, Tushal Khunt
96-98
27. Smart Remote Access and Tracking for Automobile Authors: Mehul Machhi, Nikita Patel, Ujjwal Shrivastava, Rinkesh Singh
99-101
28. Journey of Lean Six Sigma: A Literature Review Authors: Sudhansu Das, Mudasir Khan, Rahul Mahto, Ravindra Yadav
102-103
29. Study and Analysis of Boiler Waste Heat Recovery in Paper Mill Authors:Prof. Deven Patel, Bhandari Krupal, Patel Aniket, Patel Prit, Patel Sojal
104-106
30. Improving the Efficiency of AFBC Boiler by Reducing Dry Flue Gas Losses Authors: Rajat Singh, Sushil Sonkhiya, Amit Yadav, Pintoo Singh
107-109
31. To Increse the Efficiency of Low Capacity Petrol Engine by Electric Turbocharger Authors: Vishal Naik, Gaurang Patel, Mitesh Patel, Dhaval Patel, Meet Patel
110-111
32. Study on Performance of Concrete Incorporating Copper Slag as Fine Aggregate and Recycled Aggregate as Coarse Aggregate Authors: Kishan Gupta, Mukesh Pagare, Jinal patel, Amit R. Chauhan, Saquib Shaikh
112-114
33. Advancement in Asphalt Pavement Using Glass Grid Reinforcement Authors: Rahul Patel, Divyesh Mishra, Deepak Yadav, Rohit More, Rajesh Shah
115-117
34. Analysis on Behavior of Plain Cement Concrete by Using Copper Wires Authors: Jain Shivika Dipendrakumar, Patel Roshni Pravin, Patel Vrushali Bharathbhai, Patel Yuktaben Jashvanthbhai, Sanjay kumar Damodar Rachcha
118-120
35 Comparative Study and Design of Different Types of Slab Systems Using ETABS, with Their Cost Estimation Authors: Abhishek A. Prasad, Naazeema Begum, Sharma M. Pushpa, Shivanand H. Yadav, Sanjay Rachcha
121-124
36. Experimental Study on Strength of Concrete Using Super Absorbent Polymer Authors: Parvez Ansari, Avnit Dhodi, Mitesh Contractor, Shaikh Mohd Saquib, Amit R Chauhan
125-127
37. Dynamic Analysis of Building on Plain Ground and Building on Sloping Ground Authors: Parth K. Patel, Shehul B. Patel, Sujit D. Bariya, Harnish S. Jaiswal, Saquib Shaikh
128-131
38. Use of Plastic Waste in Concrete Authors: Bhavsar Mihir, Bhavsar Shivani Jiteshbhai, Baria Dhruvi Mukeshbhai, Patel Yamini Arvindbhai, Talekar Yachana Jayeshbhai
132-135
39. A Survey on Make My Function Authors: Vaibhavi P Panchal, Hempriya B Patel, Jinal Koli, Raut Siba Ram
136-140
40. Accident Tracker Authors: Akash Jaynath Yadav, Deepali Sanjay Choudhary, Prachi Prahladbhai Patel, Vrunda J. Patel
141-144
41. A Survey on E-Charity Authors: Dipali J Patel, Drashti N Patel, Mitali M Patel, Asmita V Thodan, Bhavesh Kumar K Patel
145-147
42. Automation of Shree TNB Polymers Ltd Authors: Santosh Kumar Niranjan Das, Daksh Deepak Raura, Irfan Asgarali Ansari, Dhaval H. Rangrej
148-150
43. Automatic College / School Time Management System Using Fire Security, Water Sprinkler, Auto Gate, Exam Time Authors: Akash Patel, Srujax Patel, Vivek Ahir, Neel Tandel, Sita Singh
151-154
44. GSM Based Electricity Cut off System for Residential Area Authors: Fenil Patel, Febin Babu, Purvesh Tandel, Biraja Prasad Das
155-160
45. Transformer Protection Against over Voltage, over Current and Detection of Oil & Smoke Authors: Sachin Mangela, Bhumika Patel, Shubham Patel, Ashish Parmar, Hiren Patel
161-164
46. Tree Shaped Wind Turbine for Renewable Power Generation Authors: Hiren Patel, Dharmesh Nakum, Prashant Kalugade, Ajay Kulkarni, Gaurav Patil, Minesh Badgujar
165-168
47. Compressed Air Engine: A Review Study Authors: Brijesh Prajapati, Ankit Arya, Harshesh Patel, Bhuvin Patel, Parikshit Patel
169-171
48. Experimental Investigation of Using Hydrogen Fuel in Four Stroke S.I Engine Authors: Rashesh Akbari, Kishan Gaywala, Kevin Mistry, Marmik Patel, Rakesh Chotalia
172-174
49. Live-In Society Authors: Ashish A Jaiswal, Neel C Bhavsar, Darshika S Kathiriya, Neha Sharma
175-178
50. Digital RTO with Automatic Toll Collection Authors: Kinjal Dalpat Patel, Vijayta Suman Patel, Rajani Rajesh Rai, Vrunda J Patel
179-183
51. Automatic Power Factor Compensation for Industrial Power Used To Minimize Penalty Authors: Deepak Prajapati, Jeet Patel, Jigesh Khadik, Rahul Yadav, Hiren Patel
184-187
52. Reduce Die Changeover Time in HCCP Using SMED Technique Authors: Darshan Kachhadiya, Bhautik Nakum, Deep Raut, Subal Saha
188-190
53. The Bricks Authors: Kiran S Gandhi, Hiral Dubal, Sheetal R Patel, Siba Ram Raut
191-192
54. Design Optimisation of Leaf Springs Used in Automobile Vehicle by Composite Materials and its Comparison with Conventional Materials by Use of FEA Analysis Authors: Rajat Singh, Sushil Sonkhiya, Amit Yadav, Pintoo Singh
193-199
55. Development of Enabler Based Framework for Enhancing Sustainable Supply Chain Management Adoption in South Gujarat Textile Organization Authors: Jaivik Patel, Alok Choudhary, Ashish Patel
200-205
56. Efficient Allocation of Resource Dynamic using Container Authors: Jitali Bhandari
206-208
57. Improvement in Design of Single Screw Extruder Machine Authors: Viren Prajapati, Vicky Patel, Vibhav Patel, Parimal Solanki, Kevin Bhandari
209-211
58. A Survey and Implementation of Tire Inflation System for Automobile Authors: Jaypal Patel, Mayank Patel
212-214
59. Attention Allied Protocol for Disaster Application (AAPDA) Authors: Siddhi Desai, Vikhyat Rao, Subetharan M, Jay Nayak, Nishanki Bariya
215-219
60. Design Optimisation of Leaf Springs used in Automobile Vehicle by Composite Materials and its Comparison with Conventional Materials by use of FEA Analysis Authors: Rajat Singh, Sushil Sonkhiya, Amit Yadav, Pintoo Singh
220-227
61. ELECTRON: Efficient Leakage Controlled Transistor Level Approach for Subthreshold Current Reduction Author: Dr. R. Anjana
228-233
62. Experimental Study on Strength of Concrete using Super Absorbent Polymer Authors: Parvez Ansari, Avnit Dhodi, Mitesh Contractor, Heeral Patel, Shaikh Mohd Saquib
234-236
63. Martbotica - Supermarket of Future Authors: Mayank H. Prajapati, Sumit P. Kabiria, Mayank R. Prajapati, Vardan S. Patel, Suchita Sunil Borkar
237-240
64. Multi-Cutter Grass Cutting Machine Authors: Patel Malav, Patel Meet, Patel Narendra, Patel Nirav
241-244
65. To Apply Sustainable Manufacturing System in FRP Cooling Tower Body Manufacturing Industry Authors: Kuyyamudi Parth L, Patel Tushar B, Sukani Aditiya P, Waghela Ronit V, Ashish Patel
215-247
66. Six Sigma in a Glass Processing Industry: A Case Study Authors: Rahul Mahto, Sudhansu Das, Ravindra Yadav, Mudasir Khan
248-249
67. To Increse the Efficiency of Low Capacity Petrol Engine by Electric Turbocharger Authors: Vishal Naik, Gaurang Patel, Mitesh Patel, Dhaval Patel, Meet Patel
250-251
68. Daman Municipal Council Authors: Dipansh Singh Manhas, Jangid Sneha Shivram, Dharti Yogeshbhai Raval, Niti Devang Thakar, Vrunda J. Patel
252-253
69. Experiment on Thermoacoustic Refrigeration System Using Ammonia as a Refrigerant Authors: Yash K. Bharti, Animesh R. Dodia, Jay S. Dudhadhari, Keval J. Patel, Ashish Patel, Hemant Patel
254-259
Organizing Committee
Patron
Mr. N Shridhar, Campus Director Laxmi Vidyapeeth, Sarigam
Dr. Basavaraj Patil, Director Laxmi Institute of Technology
Convenor
Dr. R. Anjana, Asst. Prof / EE +91 97252 10101
Mr. Ashish Patel, Asst. Prof / Mech +91 97252 10083
Coordinators Prof. Amrat Patel, Principal, LIT (Diploma)
Prof. Suchita Borkar, HOD / ECE
Prof. Parikshit Patel, HOD / Mech
Prof. Ravi Krishan Pandey, HOD / CSE
Prof. Viralkumar Prajapati, HOD / IT
Prof. Chirag Shah, HOD / Civil
Prof. S. Kannan, HOD / EE
Prof. Keval Patel, HOD / Auto
Prof. Gaurav Gandhi, HOD / GD
Prof. Sagar Mistry, HOD / Auto (Diploma)
Prof. Luish Patel, HOD / EE (Diploma)
Prof. Aamirhamza, HOD / Civil (Diploma)
Prof. Krunal Dhivar, HOD / Mech (Diploma)
Prof. Bhargav Desai, HOD / GD (Diploma)Board
Editor in Chief Dr. Manoj K Pandey
Advisory Board
Dr. Binod Kumar
Dr. Angela Amphawan
Dr. Naimish Zaveri
Prof. Mitul K. Patel
Dr. Vishnu Narayan Mishra
Dr. Bipin J. Agrawal
Prof. Milan Vachhani
Mr. Chandiwala Anuj K.
Contact us
Address: Laxmi Institute of Technology, Laxmi Vidyapeeth Campus, Post Bag No. 15,
Sarigam - 396155, Tal. Umargaon, Dist - Valsad, Gujarat, India
Contact No. : +91 - 260 – 6630900, +91 – 9638027905/ 9327528861
Email: [email protected] | Website : laxmi.edu.in , lit.laxmi.edu.in