new edges new lighting age - booslight.combooslight.com/upload/pdf/citycentric.pdf · 01 02 2- step...
TRANSCRIPT
New edges for the new lighting age
Fitting designed by JSM Designand Lighting Consultancy to reflect landscapeand urban architects ‘and planner’ visions.
Edition March 2016. (Digital version 1.0 )
2016 © booslight
06
03
04
0201
CityCentric range of families have been engineered to integrate state-of-the-art LED technologies into the most appreciated and cared environments.
01 Historical Districts02 Streets and Avenues03 Shopping Areas04 Walking & Recreational Paths
05 Parks and Gardens06 Residential Areas07 Business Areas
07
05
CORDOBAdesign
WM Wall Mounted PT Post-top SE Side-entry ST SuspendedCY CatenaryZT Zenithal
WM Wall Mounted PT Post-top SE Side-entry ST SuspendedCY CatenaryZT Zenithal
GRANADAdesign RETROFITTINGsystem
different applications18 different applications24 different applications∞
Two-parts IP66 die-cast aluminum alloy kit, to retrofit standard & traditional light sources and lamps, with the most up-to-date LED technology.
05
ROILEDtec
ROIfocus
4KXbin
TR
LightAdapt
Mastermind
1-10VDALI
CL
CLO
BlueVolt
NightBalance
Universe
RoI LED Tec
City Centric grants that operating and servicing cost are minimized and initial cost will be quickly amortized since you will need less number of luminaires, lower wattage and you can add the advantages of the countless functionalities and possibilities.
Own and proprietary lenses & optics and thermal
reliable system are the key factors to obtain an
unbeteable lumens/watt ratio. LEDs adjustable
arrays and electronic drivers that proclaim a
lifetime of up to 100.000hrs operating hours (L70).
Easy plug-and-works technology minimizes initial
installation cost. Optical systems and electronics
systems can be replaced tools-free on-site at the
end of its service life.
09
LightAdapt
Unlike many other competitors, BOOS installs
inside its luminaires, own and proprietary lenses.
Designing and manufacturing our lenses only by us
and for us, allows that the light emitted by the
fittings adapts to an uncountable number of
lighting systems layouts.
TR (thermally reliable)
Functionality included in the LED´s PCB and in the
driver that, by regulating the output current of the
driver, dims down or even turns off the fitting, in
case the system –occasionally or temporarily-
reaches a critical temperature limit settled
in-factory.
Xbin
XBin step MacAdam functionality shows the critical
importance of delivering long-term consistent
colour and securing long-term color uniformity of
the fittings during the whole life-time and beyond.
City Centric fittings secure XBin for the whole range
of colour temperatures from warm to neutral and
from cool to daylight.
4K
A surge protector (or surge suppressor) is a built in
system that limits the voltage supplied to the
electrical parts, from voltage spikes, including those
caused by lightning or standard operations in the
power network. Our standard solution grants an
optimal 4K protection. (10K protection under
request).
NightBalance
In-factory pre-set, before delivery, of multi-step
dimming of up to 5 time-periods and up to 5
lighting levels, grants countless possible light
outputs to manage and monitor the requirements
needed during peak-hours, middle of the night and
all the transitional periods before, in between and
after them. Stand-alone configuration and
high-efficient functionality that makes the fullest
use of all the strengths of LED luminaires in
maximizing the energy savings in off-peak hours.
Future-proof functionality that can be
reprogrammed in case of future upgrade of our
LEDs arrays due to technological advancement.
Flexiflux
Due to the flexibility as a lighting source offered by the LED technology and our goal to deliver to our clients
and customers the most appropriate configuration, to meet all the requirements of their lighting systems,
BOOS developed Flexiflux functionality. Thanks to Flexiflux there will always be more than three options of
City Centric configuration to choose, depending on the focus of the owner of the lighting system: lifetime
of the installation, size, performance, efficiency, price or Return on Investment.
BlueVolt
BlueVolt reduces the light output of the luminaire
proportionally to the reduction of the amplitude of
the mains voltage. Pre-programmed cost
beneficial 3-step dimming functionality that can
grant the lifetime of the LEDs performance.
CLO (constant lumen output)
Dimming the fitting from the beginning and
increasing the power of the LED system inversely
to the lumen depreciation curve of the due to the
aging process of the LEDs, we can obtain energy
savings, extended life-time of the LEDs & the
complete system and secure that the luminous
flux is maintained over the time.
CL
Group of luminaires control system that allows the
possibility of reducing the fittings lighting flux, and
thus their consumption, in off-peak hours by
means of a secondary 230V line. Following our
flexibility philosophy, the reduced lighting level can
be obtained both, when the Cl is activated or when
it is not activated, as requested by the client.
1-10V
Continuous (step-free) analogue control-signal
diming functionality. 1-10V allows to deliver lighting
levels from 10% output current of the driver up to
100% without the need to set any single or
multistep level. This functionality can complement
our NightBalance functionality.
DALI
Dali´s functionality provides another more element
to monitor and control the lighting levels providing
continuous dimming thus minimizing energy
consumption and reducing maintenance cost.
Using open standard protocol DALI flexibility is
enhanced and design of the lighting project is
simplified. At the same time allows the
implementation in our fitting of third company’s
management control systems.
Mastermind
Telemanagement system for monitoring,
controlling, metering and diagnosing outdoor
lighting systems.
11
With our Configurator System, we are able to
provide different possibilities for a given lumen
package. According to the lighting specifications we
can deliver solutions that will differ in number of
LEDs, lifespan, energy savings and TCO (Total Cost
of Ownwership).
LEDtec
Configurations from 200 mA [6 LEDs] to 700 mA [36 LEDs]6
6 12 16
24 30 36
6 750-2250 6-19 313-100 100
12 1000-3650 8-27 330-150 100
18 1250-5000 10-37 318-138 100
24 2500-7000 16-51 225-102 100
30 2750-8500 22-61 220-75 100
36 3500-10000 24-74 213-63 100
NEUTRALWHITEMIN/MAX LUMENLEDS
POWER (W)MIN/MAX
LIGHT SOURCE(KHRS) MAX/MIN
LIFETIME(KHRS)
OPTICproposals
Optics for general use4
ORW ORS ORW2
ORW
ME1-6 class road and street lighting.
Road width / mounting height > 0.8.
ORS
ME1-6 class road and street lighting.
Road width / mounting height < 0.8.
ORW2
ME1-6 wet class road and street lighting.
High reflectance asphalts.
Road width / mounting height > 0.8.
ORN
CE & S class street lighting, cycling & pedestrian paths.
ORN
13
PCR and PCL
Pedestrian crossings
(right and left)
OP
Squares, parking lots
A45
Roundabout & area square
Optics for squares and roundabouts2
OP A45
Optics for pedestrian crossings2
PCLPCR
CORDOBAdesign
CORDOBAdesign
Different proporsals18
CORDOBAElegant, pure, clear and timeless design that aesthetically redefines and modernizes the shapes and edges of the city centre and historical districts outdoor lighting.
Combining an unbeatable range of possible applications and mounting systems with our advanced
RoILedTec, architects and planners can conceive and implement a lighting proposal that reinforces the
character of our cities maximizing the lighting performance while reducing energy consumption.
Cordoba’s innovation recipe is the result of the whole technological process mastery: the sum of perfect
design + best practices + reliable solutions + proved components from first class manufacturers + own and
proprietary lenses, optical and thermal management systems.
RELIABLEOwn Innovation
WHY Plastic bowl
A timeless design where the focus is on
maximum heat control and dissipation, ensures
that the LEDs and all the electronic components
work under the most convenient and beneficial
thermal conditions.
Durable & recyclable materials & components
that proclaims a Recyclability Ratio of 98%.
Own and proprietary lenses that generate a
optical performance package with fewer number
of luminaires and wider spacing between them.
LEDs arrays and patterns contribute to
configure countless possibilities to generate the
better price - lifetime - performance - value
proposal. Top-quality materials used in the
luminaire and faultless manufacturing excellence
delivers exceptional and reliable performance with
minimal maintenance for many years, keeping the
essence of ROI philosophy.
B
A
C
D
Optional plastic bowl: in-house designed and manufactured with special chemical treatment 8-faces
transparent plastic bowl satisfactory improves the performance of the optical system and the quality of
lighting, providing a unique solution:
FLAT GLASS PLASTIC BOWLVs
Maximizes glare control
Increases lighting visual perception
Improves lighting uniformity
01 020101 0202
2- step maintenance
19
Features [manufacturing and quality]
A
B
C
LEDCEENEC (pending)Class IClass II
ALIP 66IK 08 Flat GlassIK 10 Plastic Bowl
Innovative own designs and technology alongside with quality manufacturing processes and
after-delivery monitoring and service assures maximal and reliable fittings performance with minimal
maintenance.
Over-stressed Integral Fitting´s Assembly
Best-in-class thermal management. Perfectly
engineered optical systems and full luminaire
precise sizing design, enabling all luminaire parts
and components working efficiently, securing the
most reliable package over lifetime and beyond,
maximizing its performance and granting colour
stability.
Superior Optical performance. Maximizes
lifetime, and energy savings and helps in granting
the best RoI to any public or private developer
project. OPTIBOOS 4rdG maximizes fitting´s
performance, secures ULOR = 0% and provides
lighting sector leading position in glare control and
visual comfort producing the maximum lighting
level (lumens per watt), directing the light exactly
and precisely where it is needed.
Manufacturing mastery to obtain zero-fault
fitting consistency. (Die) casting and injecting
experience, collaboration with prestigious suppliers,
advanced designs and proprietary PCV,s, lenses,
gaskets, designs and test & laboratories (electrical,
electronics, IP, IK, endurance, and photometry)
delivers a fitting characterized by long-term
protection from dust, moisture, vibration and any
other adverse environmental effects.
CATEN
With catenary device included.
Flat Glass
Plastic Bowl
INFA
With U-shape wall attachment included.
Flat Glass
Plastic Bowl
MENTO
With wall/pole downwards attachment included.
Flat Glass
Plastic Bowl
CARPIO
Flat Glass
Plastic Bowl
Zenital (1”G inch)
+ single/double/triple/quadruple
GABO bracket for suspended
wall/lateral mounted.
MOTA
4xpillar bracket suspended.
Flat Glass
Plastic Bowl
VIANA
Flat Glass
Plastic Bowl
4xpillar bracket suspended version
+ single/double/triple/quadruple
GABO bracket for wall/post-lateral
suspended mounted.
(Jaca upper-end pole cap).
23
MENA
4xpillar bracket top mounted
for post-top/bracket mounted.
Flat Glass
Plastic Bowl
AMBROS
Flat Glass
Plastic Bowl
25
4xpillar bracket post-top version
+ single/double/triple/quadruple
GABO bracket for post-top wall/lateral mounted.
CANDA
Flat Glass
Plastic Bowl
TRAZO
Flat Glass
Plastic Bowl
4xpillar with bottom neck bracket suspended
version + single/double/triple/quadruple
GABO bracket for wall/post-lateral suspended
mounted. (Jaca upper-end pole cap).
4xpillar with bottom-neck bracket suspended.
TORDE
4xpillar bracket with bottom neck top mounted.
Flat Glass
Plastic Bowl
SECA
Flat Glass
Plastic Bowl
27
4xpillar with bottom-neck bracket post-top
version + single/double/triple/quadruple
GABO bracket for wall/post lateral
mounted. (Jaca upper-end pole cap).
2727
4xpillar with bottom-neck bracket post-top4xpillar with bottom-neck bracket post-top
GRANADAdesign
GRANADAdesign
Different proporsals24
GRANADAGranada delves itself deeper into the tradition to challenge the modern paradigm of luminaire´s conception. Form or shape, soul or image, Granada plays with the rules of perception and is conceived as a family of luminaires that compete each other to capture the diversity of the city and the wellbeing of its citizens..
Combining an unbeatable range of possible applications and mounting systems with our advanced
RoILedTec, architects and planners can conceive and implement a lighting proposal that reinforces the
character of our cities maximizing the lighting performance while reducing energy consumption.
Cordoba’s innovation recipe is the result of the whole technological process mastery: the sum of perfect
design + best practices + reliable solutions + proved components from first class manufacturers + own and
proprietary lenses, optical and thermal management systems.
RELIABLEOwn Innovation
WHY Plastic bowl
A timeless design where the focus is on
maximum heat control and dissipation, ensures
that the LEDs and all the electronic components
work under the most convenient and beneficial
thermal conditions.
Durable & recyclable materials & components
that proclaims a Recyclability Ratio of 98%.
Own and proprietary lenses that generate a
optical performance package with fewer number
of luminaires and wider spacing between them.
LEDs arrays and patterns contribute to
configure countless possibilities to generate the
better price - lifetime - performance - value
proposal. Top-quality materials used in the
luminaire and faultless manufacturing excellence
delivers exceptional and reliable performance with
minimal maintenance for many years, keeping the
essence of ROI philosophy.
B
A
C
D
Optional plastic bowl: in-house designed and manufactured with special chemical treatment 8-faces
transparent plastic bowl satisfactory improves the performance of the optical system and the quality of
lighting, providing a unique solution:
Maximizes glare control
Increases lighting visual perception
Improves lighting uniformity
FLAT GLASS PLASTIC BOWLOR
33
Features [manufacturing and quality]
A
B
C
LEDCEENEC (pending)Class IClass II
ALIP 66IK 08 Flat GlassIK 10 Plastic Bowl
Innovative own designs and technology alongside with quality manufacturing processes and
after-delivery monitoring and service assures maximal and reliable fittings performance with minimal
maintenance.
Over-stressed Integral Fitting´s Assembly
Best-in-class thermal management. Perfectly
engineered optical systems and full luminaire
precise sizing design, enabling all luminaire parts
and components working efficiently, securing the
most reliable package over lifetime and beyond,
maximizing its performance and granting colour
stability.
Superior Optical performance. Maximizes
lifetime, and energy savings and helps in granting
the best RoI to any public or private developer
project. OPTIBOOS 4rdG maximizes fitting´s
performance, secures ULOR = 0% and provides
lighting sector leading position in glare control and
visual comfort producing the maximum lighting
level (lumens per watt), directing the light exactly
and precisely where it is needed.
Manufacturing mastery to obtain zero-fault
fitting consistency. (Die) casting and injecting
experience, collaboration with prestigious suppliers,
advanced designs and proprietary PCV,s, lenses,
gaskets, designs and test & laboratories (electrical,
electronics, IP, IK, endurance, and photometry)
delivers a fitting characterized by long-term
protection from dust, moisture, vibration and any
other adverse environmental effects.
OSMA
Zenital (1”G inch)
+ single/double/triple/quadruple GABO
bracket for suspended wall/lateral mounted.
(Metropolis upper-end pole cap).
Flat Glass
Plastic Bowl
PANO
With catenary device included.
Flat Glass
Plastic Bowl
SILOS
Zenital (1”G inch) device included.
Flat Glass
Plastic Bowl
With post-top/lateral/wall mounted
single/double downswept TOBI bracket.
With post-top/lateral/wall
mounted single/double upswept SIMAN bracket.
SIMAN
Flat Glass
Plastic Bowl
TOBI
Flat Glass
Plastic Bowl
37
4xpillar bracket with bottom-neck
top mounted.
TUDELA
Flat Glass
Plastic Bowl
BUELNA
Flat Glass
Plastic Bowl
4xpillar with bottom neck bracket + GABO bracket top mounted for post-top/bracket mounted.
ZARZA
Flat Glass
Plastic Bowl
4xpillar bracket suspended.
4xpillar bracket suspended version
+ single/double/triple/quadruple
GABO bracket for wall/post-lateral
suspended mounted.
(Metropolis upper-end pole cap).
CUENCA
Flat Glass
Plastic Bowl
4xpillar bracket top mounted+ single/double/triple/quadruple
GABO bracket mounted. (Metropolis upper-end pole cap).
ZUMA
Flat Glass
Plastic Bowl
BRACO
Flat Glass
Plastic Bowl
4xpillar bracket top mounted.
41
TRIAN
Flat Glass
Plastic Bowl
LUGAN
Flat Glass
Plastic Bowl
4xpillar bracket triangular-shape lateral
mounted version + single/double/triple/quadruple
LUGAN bracket for wall/lateral mounted.
4xpillar triangular-shape bracket top mounted.
43
COPA
Flat Glass
Plastic Bowl
OLMO
Flat Glass
Plastic Bowl
2V-shape broken-legs
bracket post-top mounted.
4xbroken-legs bracket post-top mounted.
V-shape upsweep broken-legs bracket version
for single post-top, wall mounted and single/double/triple/quadruple
lateral pole mounted.
OCA
Flat Glass
Plastic Bowl
RETROfitting
Retrofitting module, made of high corrosion resistant, low cooper content die-cast aluminum alloy, to retrofit most ofstandard and traditional light sources and lamps with the most up-to-date LED technology.
Easy to install, tools-free access to all components
and future-oriented to secure upgradability to new
technological advancements. The retrofitting kit
incorporates our RoI LED Tec optical system (with
all the possible light photometries and functionali-
ties).
IP66 for the optical system and IK08 –flatglass- and
IK10 -8-faces polycurved low-glare plastic bow.
Easy removable electric and electronic compo-
nents galvanized steel gear tray, mounted on top
of the upper body and fixed to the body by 2 deta-
chable steel clips allowing the hands-free removal
of the electrical tray. 3-poles (as standard)
tools-free cable connector allows easy installation
and connection to the mains.
RETROfitting
49
TECHNICALSpecs
Made of high corrosion resistant, low cooper
content die-cast aluminum alloy parts –upper
body and frame-. Heat dissipation coming from
the optical system attached to the upper body is
granted thanks to the extended aluminum
surface and upper fins. 4mm toughened glass
framed by an extruded silicone gasket and
pressured together between upper body and
frame by 8 stainless steel screws that grants
water and dust tightness IP66 for the optical
system. (As an option these 8 screws can be
supplied upon request with wing nuts or
quarter-turn nuts, instead of standard nuts).
New edges forthe new lighting age
OUTSIDE
265x265mm.
80mm.
HEIGHT
Optical system is an assembly of PCB, LEDs and
lenses. In retrofitting each individual LED is
encased in its unique and in-house designed and
manufactured lens and placed in an array of
lenses that combines together in countless
possible optical patterns, allowing each
configuration provide the maximum possible light
output and ensuring that Retrofitting maximizes
fitting´s performance, secures ULOR=0% and
provides lighting sector leading position in glare
control and visual comfort producing the
maximum light (lumens per watt), directing the
light exactly and precisely where it is needed.
All this LEDs arrays are framed by a plastic white
light flux recuperator mask fixed to the upper part,
by fast releasing plastic clips.
Array of lenses goes from 6 LEDs to 36 LEDs that
can be feeded fom 200mA to 700mA or even
more in particular installations.
6 12 16
24 30 36
6 750-2250 6-19 313-100 100
12 1000-3650 8-27 330-150 100
18 1250-5000 10-37 318-138 100
24 2500-7000 16-51 225-102 100
30 2750-8500 22-61 220-75 100
36 3500-10000 24-74 213-63 100
NEUTRALWHITEMIN/MAX LUMENLEDS
POWER (W)MIN/MAX
LIGHT SOURCE(KHRS) MAX/MIN
LIFETIME(KHRS)
51
Features [manufacturing and quality]
LEDCEENEC (pending)Class IClass II
ALIP 66IK 08 Flat GlassIK 10 Plastic Bowl
RELIABLEOwn innovation
WHY Plastic bowl
Optional plastic bowl: in-house designed and manufactured with special chemical treatment 8-faces
transparent plastic bowl satisfactory improves the performance of the optical system and the quality of
lighting, providing a unique solution that:
Maximizes glare control
Increases lighting visual perception
Improves lighting uniformity
FLAT GLASS PLASTIC BOWLOR
Villanueva fitting, incorporates as the retrofitting
optical system, fastened to the steel plate by four
metric 4 threaded riveted bolt secured (as
requested by client) by means of traditionalnut,
wingnut or quarter turnnut.
Cast aluminium and aluminium pieces are
chemically cleaned before applying a textured
polyester electrostatically and thermally cured
powdercoating finish. This process grants that the
external aesthetics appearance and the integrity
of the fittingsis long-lifesecured.
Saline-mist test is carried out to secure the
corrosion-proof of the different components
painted and the endurance of the fittingas a
whole, inspecial saline environments, making
Villanueva ideal for sea promenades and
waterfronts.
Steel plate will be supplied – in the absence of any
other indication- in the same color as the
retrofitting. Upon request, we will provide in the
same color as the main fitting.
VILLANUEVA fitting
Flat Glass
Plastic Bowl
New edgesfor the newlighting age
New edges for the new lighting age
Spain
Cañada de la Aguilera, 67 exterior
47155 Santovenia de Pisuerga (Valladolid), Spain
Tel. +34 983136157
Germany
Im Ochenstall, 7
76689 Karlsdorf – Neuthard, Germany
Tel. +49 725194470
www.booslight.com