nilai maksimal prosiding - diponegoro...
TRANSCRIPT
Nilai Maksimal Prosiding
LEMBAR HASIL PENILAIAN SEJAWAT SEBlDANG ATAU PEER REVIEW
KARY A ILMlAH : PROSlDING
Judul karya ilmiah (paper)
Jumlah Penulis Status Pengusul
Design The Geographical Information System For Supplier Selection In Batik Industry 5 orang Penulis ke-1
Identitas Makalah a. Judul Prosiding
b. ISBN/ISSN
Prosiding World Congress on Engineering 2015 978-988-19253-4-3
c. Tahun Terbit, Tempat Pelaksanaand. Penerbit/organiser
: 1-3 Juli 2015, London, U.K : IEEE
Kategori Publikasi Makalah (beri pada kategori yang tepat)
Hasil Penilaian Peer Review :
e. Alamat repository PT/web prosidingPROSIDING : http://www.iaeng.org/publication/WCE201S/
ARTIKEL : hnp:, \\"" .iaeng.org publication WCl:2015/WCE2015 226.pdf
f. Terindeks di (jika ada) : SCOPUS
0 Prosidlng Forum llmiah lnternasionalO Prosiding Forum llmiah Nasional
pp'.!21-
Nilai Maksimal Prosiding Nilai AkJ1ir Komponen Yang
Yang Dinilai lnternasional Nasional Diperoleh
a. Kelengkapan unsur isi prosiding (10%) 3 3 b. Ruang lingkup dan kedalaman pembahasan 9 8
(30%)C. Kecukupan dan kemutahiran data/informasi dan 9 7
metodologi (30%)d. Kelengkapan unsur dan kualitas 9 9
terbitan/prosiding(30%)Total = (100%) 30 27 Nilai Penusul = (60%) x 27 = 16,2
Catatan Penilaian Paper oleh Reviewer : I. Kesesuaian don kclengkapan unsur isi prosiding: Unsur isi paper sesuni dcngan fonnat yang diberikan oleh conference". Substansi artikel
adalnh berhubungnn dengn bidang itmu Jindus1riol inforn1ation technology". Penulisan pada setiap subbab sudah sesuai dengan sistematikapenulisannya (skor=3,0).
2. Ruang lingkup dnn kedataman pcmbahasnn:Substansi artikel scsuoi dengan ruang lingkup konvcnrensi (The 2015 International Conference of Computer Science and Engineering.Kedalaman pembahasan masuh kurang. nntarn lain pdeskripsi dan prolotipc GIS bclum fokus, dan pcmbahasan has ii lidak disesuaika / menggunnkan rujuknn tcrbaru (skor-8.00).
3. Kecukupnn dan kcmutokhiran data/informasi dan mrtodologi: Kecukupan sudah baik. namun substansi dan hasil pcnclitian bclum mcnunjukkan adanya kemutnkhirnn dalam toeri atau metodologi. Dari 48 bh rujukannya, bclum tcrlihat untuk mendukung teori baru (penelitian bersifat tcrapan). Sebagian bcsar rujukon lcbih dari 10 tnhun ternkhir. Ada rukunan [49] tidnk ada pada References. (skor = 7.00)
4. Kele11gkapa11 uw;ur t!,111 k11ali1as 1erbita11: .
Artikel disampaikan pada Proceedings of the World Congress on Engineering, 2015 di London. U.K. Publikasi artikcl diterbitkan poda "International Association of Engineer'·, terindcks di SCOPUS. Kualitas terbitan baik (skor= 9.00.
Semarang, 24 September 2018 Rev;ewe
w
Prof. Ors. Mustafid, M.Eng, Ph.D NIP. l 95505281980031002 Unit kerja : Universitas Diponegoro
LEMBAR HASIL PENILAlAN SEJA WAT SEBIDANG ATAU PEER REVIEW
KARY A ILMIAH : PROSlDING
Judul karya ilmiah (paper)
Jumlah Penulis Status Pengusul ldentitas Makalah
Kategori Publikasi Makalah (beri pada kategori yang tepat)
Hasil Penilaian Peer Review ·
Komponen
Design The Geographical Information System For Supplier Selection In Batik lndustry 5 orang Penulis ke-1 a. Judul Prosiding
b. ISBN/ISSN
Prosiding World Congress on Engineering 2015 978-988-19253-4-3
c. Tahun Terbit, Tempat Pelaksanaand. Penerbit/organiser
1-3 Juli 2015, London, U.K: IEEE
e. Alamat repository PT/web prosidingPROSIDJNG : http://www.iaeng.org/publication/WCE2015/
ARTIKEL : http://www.iaeng.org/publication/WCE20 I 5/WCE2015 226.pdf
f. Terideks di Gika ada) : SCOPUS
D Prosiding Forum Ilmiah JnternasionalD Prosiding Forum llmiah Nasional
pp22 I-
NiJai Maksimal Prosiding Nilai Akhir Yang
Yang Dinilai Internasional Nasional Diperoleh
a. Kelengkapan unsur isi prosiding (10%) 3 2,80 b. Ruang lingkup dan kedalaman pembahasan 9 8,10
(30%)C. Kecukupan dan kemutahiran data/informasi dan 9 8,70
metodologi (30%) d. Kelengkapan unsur dan kualitas 9 8,40
terbitan/prosiding(30%)Total = (100%) 30 28,00 Nilai Pengusul = (60%)*28,00 = 16,80.
Catatan Penilaian Paper oleh Reviewer : I. Kescsuaian dan kclengkapan unsur isi prosiding: Unsur dari artikel paper sudah sesuai dan lengkap, terdiri dari title, introduction, literature
review, methodology, data and analysis, discussion, conclusion and resulls. lsi tulisan sesuai dengan bidang ilmu Teknik lndustri, dengan temaSupplier Selection. (skor = 2,80)
2. Ruang lingkup dan kcdalaman pembahasan: Artikel paper rnembahas tema yang sesuai dengan ruang lingkup bidang ilmu Teknik In<lustri.Kajian pustaka dipaparkan secara mendalam, unruk memberikan pemahaman rinci perihal Geographical lnfonnation System dan Applikasi, yangselanjutnya dipaparkan juga secara mendalam pada bagian metodologi penelitian (skor = 8, I 0)
3. Kecukupan <lan kemutakhiran <lata/informasi <lan mctodologi: Data-data yang dikumpulkan dan hasil penelitian telah dipaparkan dalambentuk Data Flow Diagram (DFD). DFD juga lebih diperjclas dengan dipaparkan dalarn bentuk diagram dan textual. Tema berupa applicationdevelopment menggambarkan kctcrkinian tema penelitian (skor = 8, 70)
4. Ke/engkapa11 1111sur dan kualutas terbita11: Prosiding ini tergolong publikasi bereputasi dan kcgiatan conference tahunan (Proceedings of the World Congress on Engineering, ISBN of Vol I (pp 1-669): 978-988-19253-4-3), yang diterbitkan oleh Publisher: Newswood Limited.Organization: International Association of Engineers. (skor = 8,40).
Prof. Ir. Dana S Saroso, MEngSc.,PhD. NIDN. 0305026302 Unit kerja: Universitas Mercu Buana
Scopus
Document details
29 of 38
Design the geographical information system for supplier selection in batikindustry (Conference Paper)
, , , ,
Departemant of Industrial Engineering, Diponegoro University, Central-Java, Indonesia
AbstractMost of the SMEs in the batik industry were only concerned about the price offered and the quality of the rawmaterials. Of course, price offered and quality were still the important criteria, but knowing the location of supplierswho can provide the desired price and quality were also important and this can reduce the cost of production. InternetGeographical Information Systems (GIS), therefore, is a tool of great inherent potential for SMEs in the batik industrychoosing the supplier of raw material. The spatial modelling offered by GIS is directly applicable to understanding thelocation of each supplier and, and its relationship to cost of delivery. In this study, the proposed GIS for supplierselection is developed through the Software Development Life Cycle (SDLC) methodology; whereas, architecture ofinformation systems is described in the form of Use-Case Diagram, Context Diagram, and DFD, and database designis described in the form of ERD. Thus, alpha test and beta test are conducted in order to verify that the proposed GISsatisfies the specified requirements.
SciVal Topic Prominence
Topic:
Prominence percentile: 29.941
Author keywordsCost of production Geographical information systems SMEs in batik industry Supplier selection
Indexed keywords
Engineeringcontrolled terms:
Computer software Costs Information systems Life cycle Software design
Engineeringuncontrolled terms
Beta tests Cost of productions Database design Software development life cycle
Spatial modelling Supplier selection Use case diagram
Engineering mainheading:
Geographic information systems
Back to results Previous Next
Export Download Print E-mail Save to PDF ⋆ Add to List More...
Lecture Notes in Engineering and Computer ScienceVolume 2217, 2015, Pages 221-2262015 World Congress on Engineering, WCE 2015; Imperial College LondonLondon; UnitedKingdom; 1 July 2015 through 3 July 2015; Code 115730
Susanty, A. Hartini, S. Puspitasri, D. Budiawan, W. Hidayatullah, P.
View references (48)
Architectural design | Geographic information systems | Retail centres
ISSN: 20780958ISBN: 978-988192534-3Source Type: Conference ProceedingOriginal language: English
Document Type: Conference PaperVolume Editors: Ao S.I.,Gelman L.,Korsunsky A.M.,Ao S.I.,HukinsD.W.L.,Hunter A.,Ao S.I.,Gelman L.Sponsors: et al.,IAENG Society of Artificial Intelligence,IAENGSociety of Bioinformatics,IAENG Society of ComputerScience,IAENG Society of Data Mining,IAENG Society of ElectricalEngineering
PlumX MetricsUsage, Captures, Mentions,Social Media and Citationsbeyond Scopus.
Metrics
0 Citations in Scopus
0 Field-Weighted
Citation Impact
Cited by 0 documents
Inform me when this documentis cited in Scopus:
Related documents
(2003) Information Technologyfor Development
(2003) Informing Science
(2009) 15th Americas Conferenceon Information Systems 2009,AMCIS 2009
Find more related documents inScopus based on:
Set citation alert
Set citation feed
Some challenges of integratingspatial and non-spatial datasetsusing a geographical informationsystem
Rob, M.A.
Applications of GeographicalInformation Systems inunderstanding spatialdistribution of asthma
Rob, M.A.
Evaluation of a learning systemto teach GIS for Civil Engineering
View all related documents basedon references
Authors Keywords
References (48)
Tracey, M., Tan, C.L.
(2001) Supply Chain Management, 6 (4), pp. 174-188. .doi: 10.1108/EUM0000000005709
Mwikali, R., Kavale, S.Factors affecting the selection of optimal suppliers in procurement management(2012) International Journal of Humanities and Social Science, 2 (14), pp. 189-193. .Jul.
Weber, C.A., Current, J.R., Benton, W.C.
(1991) European Journal of Operational Research, 50 (1), pp. 2-18. .doi: 10.1016/0377-2217(91)90033-R
Dickson, G.W.An analysis of vendor selection systems and decisions(1966) Journal of Purchasing, 2 (1), pp. 5-7. .winter
Zang, Z., Lei, J., Cao, N., To, K., Ng, K.Evolution of supplier selection criteria and methods, "Evolution of supplier selection criteria and methods"(2003) European Journal of Operational Research, 4 (1), pp. 335-342. .
Jain, R., Singh, A.R., Mishra, P.K.Prioritization of supplier selection criteria: A fuzzy-AHP approach(2013) MIT International Journal of Mechanical Engineering, 3 (1), pp. 34-42. .Jan.
(2012) Kontan, Jatuh Bangun Bisnis Batik Nusantaara
TREDA (Trade Research and Development Agency)(2008) Indonesia Batik-A Cultural Beauty. JakartaIND: Ministry of Trade of the Republic of Indonesia
Chang, K.(2006) Introduction to Geographic Information Systems. .Boston, London: McGraw Hill Higher Education
Publisher: Newswood Limited
View in search results format
All Export Print E-mail Save to PDF Create bibliography
1
Empirical analysis of supplier selection and involvement, customer satisfaction, andfirm performance
Cited 202 times
View at Publisher
2
Cited 23 times
3
Vendor selection criteria and methods
Cited 1319 times
View at Publisher
4
Cited 1092 times
5
Cited 24 times
6
Cited 18 times
7http://peluangusaha.kontan.co.id/news/iatuh-bangun-bisnis-batik-nusantara-tetap-menggiurkan/2012/04/23
8
9Cited 533 times
Landis, J.D.GIS capabilities, uses, and organizational issues(1993) Profiting from a Geographic Information System, pp. 23-53. .Fort Collins, CO: GIS World Inc
Grabowski, M., Sanborn, S.
(1992) Decision Sciences, 23 (6), pp. 1277-1296. .doi: 10.1111/j.1540-5915.1992.tb00449.x
Worboys, M.F., Duckham, M.(2004) GIS: A Computing Perspective. .Boca Raton, FL: CRC Press
Weigel, D., Cao, B.
(1999) Interfaces, 29 (1), pp. 112-130. .
doi: 10.1287/inte.29.1.112
Francica, J.Location analysis tools help starbucks brew up new ideas(2000) Business Geographics, 8 (8), pp. 32-33. .
Lubenow, A., Tolson, K.
(2001) Health management technology, 22 (1), pp. 54-55. .
Nemeth, D.
(2001) Pipeline and Gas Journal, 228 (3), p. 41. .
Hockstra, D., Mattejat, P.Manage drainage infrastructure(2002) Public Works, 133 (5), pp. 170-171. .
Cowen, D.J.
(1988) Photogrammetric Engineering & Remote Sensing, 54 (11), pp. 1551-1555. .
Christiansen, T.Geographical information systems for regional rural development projects in developing countries(1998) Giessener Geographischen Schriften, 75.Gießen: Selbstverlag des Geographischen Institutes der Justus-Liebig-Universität
10
Cited 5 times
11
Knowledge Representation and Reasoning in a Real‐Time Operational Control System:The Shipboard Piloting Expert System (SPES)
Cited 8 times
View at Publisher
12Cited 330 times
13
Applying GIS and OR techniques to solve Sears technician-dispatching and home-delivery problems
Cited 61 timeshttp://interfaces.journal.informs.org/content/current
View at Publisher
14
Cited 7 times
15
GIS technology helps pinpoint patients.
Cited 8 times
16
GIS shows how data become a vital corporate asset
Cited 3 times
17
Cited 3 times
18
GIS versus CAD versus DBMS: what are the differences?
Cited 176 times
19
Mennecke, B.E.Understanding the role of geographie information technologies in business: Applications and researchdirections(2000) Journal of Geographic Information and Decision Analysis, 1 (1), pp. 44-68. .
Rob, M.A.
(2003) Informing Science, 6, pp. 89-99. .
Chow, T.E.
(2008) Transactions in GIS, 12 (2), pp. 179-191. .doi: 10.1111/j.1467-9671.2008.01094.x
Peng, Z.R., Tsou, M.H.(2003) Internet GIS, Distributed Geographic Information Services for the Internet and WirelessNetworks. .Hooboken, NJ: John Wiley & Songs, INC
Plewe, B.
(1997) GIS online: information retrieval, mapping and the Internet. .ISBN: 1566901375
Eldrandaly, K.
(2007) Applied GIS, 3 (5). .
Gomez, J.A.S.(2007) GIS Applications for Real Estate in Honduras, p. 28.Master's Thesis, International Master Program for Environment Sustainable Development, July
Udell, S.(2009) Beginning Google Maps Mashups With Mapplets, KML and GeoRSS: From Novice toProfessional. .Berkeley, CA. Apress
Avison, D., Fitzgerald, G.Information systems development(2006) Methodologies, Techniques & ToolsMaidenhead, UK: McGraw-Hill Education
Pfleeger, S.I., Atlee, J.M.(2006) Software Engineering Theory and Practice. .Englewood Cliffs, NJ: Pearson Prentice Hall
20
Cited 28 times
21
Applications of Geographical Information Systems in understanding spatialdistribution of asthma
Cited 4 times
View at Publisher
22
The potential of Maps APIs for internet GIS applications
Cited 40 times
View at Publisher
23
Cited 315 times
24
GIS online: information retrieval, mapping and the Internet
Cited 142 times
25
GIS software selection: A multi criteria decision making approach
Cited 9 timeshttp://arrow4.lib.monash.edu.au:8080/vital/access/services/Download/monash:5144/DS1
26
27
Cited 9 times
28
29Cited 574 times
Massey, V., Satao, K.Comparing various SDLC models and the new proposed modelon the basis of available methodology(2012) International Journal of Advanced Research in Computer Science and Software Engineering, 2 (4), pp.170-177. .
Dora, S.K., Dubey, P.Software development life cycle (SDLC) analytical comparison on traditional and agile methodology(2013) National Monthly Refereed Journal of Research in Science & Technology, 2 (8), pp. 22-30.
Kumar, N., Zadgaonkar, A.S., Shukla, A.Evolving a new software development life cycle model SDLC-2013 with client satisfaction(2013) International Journal of Soft Computing and Engineering (IJSCE), 3 (1), pp. 216-221. .March
Qian, K., Fu, X., Tao, L., Xu, C.W., Diaz-Herrera, J.L.(2010) Software Architecture and Design Illuminated. .Sudbury, Massachusetts: Jones and Barlett publishers
Tiwari, K., Tripathi, A., Sharma, S., Dubey, V.Merging of data flow diagram with unified modeling language(2012) International Journal of Scientific and Research Publications, 2 (8), pp. 1-6. .August
Dennis, A., Wixom, B.H., Roth, R.M.(2006) Systems Analysis and Design. .Hoboken, NJ: JohnWiley & Sons, Inc
Yakubu, F., Ahmad, B.I., Omowumi, O.M., Mngohol, M.A.Process and database modelling of a University bursary system: A perspective of cash office(2011) International Journal of Computer Science Issues, 8 (4), pp. 555-560. .no 2 July
Shelly, G.B., Rosenblatt, H.J.(2010) Systems Analysis and Design. .Boston: Mass Thomson Course Technology
Bruza, P.D., Van Der Weide, Th.P.The semantics of data flow diagrams(1989) International Conference on Management of Data (CISMOD). .presented at the Hyderabad, India
Whitten, J.L., Bentley, L.D., Dittman, K.C.(2004) Systems Analysis and Design Methodology. .Irwin: McGraw Hill
30
Cited 5 times
31
32
Cited 25 times
33Cited 12 times
34
Cited 4 times
35Cited 379 times
36
Cited 2 times
37Cited 100 times
38
Cited 40 times
39Cited 23 times
Alkazemi, B.Y., Grami, G.M.A.
(2012) Global Journal of Engineering Education, 14 (2), pp. 177-182. .
Donald, S., Vie, L.Understanding data flow diagram47th Annual Conference on Society for Technical Communication. .Presented at the Texas
Tokdemir, G., Cagiltay, N.E., Kilic, O.
(2012) Proceedings of the IADIS International Conference Information Systems 2012, IS 2012, pp. 213-220.ISBN: 978-972893968-7
Chen, P.P.-S.
(1976) ACM Transactions on Database Systems (TODS), 1 (1), pp. 9-36. .doi: 10.1145/320434.320440
Christensen, H.L., Haslund, M.L., Nielsen, H.N., Tryfona, N.Operations for conceptual schema manipulation definitions and semantics(2001) 5th East European ConferencePresented at Vilnius, Lithuania, 25-28 Sept
Genero, M., Poels, G., Piattini, M.
(2008) Data and Knowledge Engineering, 64 (3), pp. 534-557. .doi: 10.1016/j.datak.2007.09.011
Blair-Early, A., Zender, M.
(2008) Design Issues, 24 (3), pp. 85-107. .
doi: 10.1162/desi.2008.24.3.85
Deshmukh, O., Kaushik, M.A overview of software verification & Validation and selection process(2013) International Journal of Computer Trends and Technology, 4 (2), pp. 177-182.
Khurana, K.K., Malhotra, M.Software testing: Techniques and importance(2014) International Journal of Innovative Research in Technology, 1 (5), pp. 713-715.
40
Employing a DFD model to facilitate the management of final-year student projects incomputer engineering
Cited 2 timeshttp://www.wiete.com.au/journals/GJEE/Publish/vol14no2/05-Grami-G.pdf
41
Cited 2 times
42
How engineers understand entity relationship diagrams (ERD): Insights from eyetracker data
43
The Entity-Relationship Model—toward a Unified View of Data
Cited 3794 times
View at Publisher
44
45
Defining and validating metrics for assessing the understandability of entity-relationship diagrams
Cited 57 times
View at Publisher
46
User interface design principles for interaction design
Cited 26 timeshttp://www.mitpressjournals.org/doi/pdf/10.1162/desi.2008.24.3.85
View at Publisher
47
48
29 of 38
Susanty, A.; Departemant of Industrial Engineering, Diponegoro University, Central-Java, Indonesia;email: © Copyright 2017 Elsevier B.V., All rights reserved.
Back to results Previous Next Top of page
About Scopus
What is Scopus
Content coverage
Scopus blog
Scopus API
Privacy matters
Language
本語に切り替える切换到简体中文
切換到繁體中文
Русский язык
Customer Service
Help
Contact us
Copyright © 2019 . All rights reserved. Scopus® is a registered trademark of Elsevier B.V. We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the
.
Terms and conditions Privacy policy
Elsevier B.V
use of cookies
6/26/2019 Lecture Notes in Engineering and Computer Science
https://www.scimagojr.com/journalsearch.php?q=21100218002&tip=sid&clean=0 1/3
also developed by scimago: SCIMAGO INSTITUTIONS RANKINGS
Scimago Journal & Country Rank
Home Journal Rankings Country Rankings Viz Tools Help About Us
Lecture Notes in Engineering andComputer Science
Country China - SIR Ranking of China 18H Index
Subject Area and Category Computer ScienceComputer Science (miscellaneous)
Publisher
Publication type Conferences and Proceedings
ISSN 00002013
Coverage 2013
Join the conversation about this journal
Enter Journal Title, ISSN or Publisher Name
SJR
The SJR is a size-independent prestige indicator thatranks journals by their 'average prestige per article'. It isbased on the idea that 'all citations are not createdequal'. SJR is a measure of scientic inuence ofjournals that accounts for both the number of citationsreceived by a journal and the importance or prestige ofthe journals where such citations come from Itmeasures the scientic inuence of the average articlein a journal it expresses how central to the global
Citations per document
This indicator counts the number of citations received bydocuments from a journal and divides them by the totalnumber of documents published in that journal. Thechart shows the evolution of the average number oftimes documents published in a journal in the past two,three and four years have been cited in the current year.The two years line is equivalent to journal impact factor™ (Thomson Reuters) metric.
Cites per document Year ValueCites / Doc. (4 years) 2006 0.000Cites / Doc. (4 years) 2007 0.084Cites / Doc. (4 years) 2008 0.073Cites / Doc. (4 years) 2009 0.047Cites / Doc. (4 years) 2010 0.075Cites / Doc. (4 years) 2012 0.000Cites / Doc. (4 years) 2013 0.277Cites / Doc. (4 years) 2014 0.333Cites / Doc. (4 years) 2015 0.274Cites / Doc. (4 years) 2016 0.282
Total Cites Self-Cites
Evolution of the total number of citations and journal'sself-citations received by a journal's publisheddocuments during the three previous years.Journal Self-citation is dened as the number of citationfrom a journal citing article to articles published by thesame journal.
Cites Year ValueS lf Cit 2006 0
External Cites per Doc Cites per Doc % International Collaboration
2007 2008 2009 2010 2011 2012 2013 2014
0.1
0.15
0.2
Cites / Doc. (4 years)Cites / Doc. (3 years)Cites / Doc (2 years)
2006 2008 2010 2012 201
0
0.09
0.18
0.27
0.36
0.45
2006 2008 2010 2012 2014
0
400
800
6/26/2019 Lecture Notes in Engineering and Computer Science
https://www.scimagojr.com/journalsearch.php?q=21100218002&tip=sid&clean=0 2/3
Leave a comment
Name
Email(will not be published)
Evolution of the number of total citation per documentand external citation per document (i.e. journal self-citations removed) received by a journal's publisheddocuments during the three previous years. Externalcitations are calculated by subtracting the number ofself-citations from the total number of citations receivedby the journal’s documents.
International Collaboration accounts for the articles thathave been produced by researchers from severalcountries. The chart shows the ratio of a journal'sdocuments signed by researchers from more than onecountry; that is including more than one country address.
Year International Collaboration2006 4 44
Citable documents Non-citable documents
Not every article in a journal is considered primaryresearch and therefore "citable", this chart shows theratio of a journal's articles including substantial research(research articles, conference papers and reviews) inthree year windows vs. those documents other thanresearch articles, reviews and conference papers.
Documents Year ValueN it bl d t 2006 0
Cited documents Uncited documents
Ratio of a journal's items, grouped in three yearswindows, that have been cited at least once vs. thosenot cited during the following year.
Documents Year ValueUncited documents 2006 0Uncited documents 2007 166Uncited documents 2008 614Uncited documents 2009 622
← Show this widget inyour own website
Just copy the code belowand paste within your htmlcode:
<a href="https://www.scimag
0
0.2
0.4
0
7
14
2006 2007 2008 2009 2010 2011 2012 2013 2014
0
2k
4k
2006 2007 2008 2009 2010 2011 2012 2013 2014
0
2k
4k
6/26/2019 Lecture Notes in Engineering and Computer Science
https://www.scimagojr.com/journalsearch.php?q=21100218002&tip=sid&clean=0 3/3
Submit
The users of Scimago Journal & Country Rank have the possibility to dialogue through comments linked to a
specic journal. The purpose is to have a forum in which general doubts about the processes of publication in the
journal, experiences and other issues derived from the publication of papers are resolved. For topics on particular
articles, maintain the dialogue through the usual channels with your editor.
Developed by:
Powered by:
Follow us on @ScimagoJR
Scimago Lab, Copyright 2007-2019. Data Source: Scopus®
I'm not a robotreCAPTCHAPrivacy - Terms
06/04/2019 The World Congress on Engineering 2015 (WCE 2015)
file:///D:/ARIES%20DOKUMEN/FOR%20FUTURE/PROCEEDING%20UNTUK%20PAK/C21_WCE%202015/index.html 1/1
WCE Home Page WCE Home Page
HomePrefaceCommitteesInvited TalksConference TopicsICAEM'15ICCIIS'15ICCSDE'15ICCSE'15ICDMKE'15ICEEE'15ICFE'15ICIE'15ICISIE'15ICME'15ICMEEM'15ICPDC'15ICSBB'15ICSIE'15ICWN'15Coming Conferences
WCE 2015 Proceedings CD
Conference Period and Venue:1-3 July, 2015
Imperial College London, London, U.K.
Organizing Association:
International Association of Engineers The papers in the CD consist of the proceedings of the conference mentioned above. They reflected the authors' opinions and their inclusion in the publication does not necessary constitute endorsement by theconference committees and the International Association of Engineers. The publication ethics and publication malpractice statement of our conference is available in the conference web page:http://www.iaeng.org/WCE2015/doc/publication_ethics.html Copyright and Reprint Policy: Abstracting is permitted with credit to the source. Libraries may photocopy the articles for private use of patrons in this proceedings publication. Copying of individual articles for non-commercial purposes ispermitted without a fee, provided that credit to the source is given. For other copying, reprint, or republication permission purposes, permission from the publisher should be obtained. Publisher:Newswood LimitedInternational Association of Engineers Proceedings Books:ISBN (Vol I): 978-988-19253-4-3ISBN (Vol II): 978-988-14047-0-1ISSN: 2078-0958 (Print)ISSN: 2078-0966 (Online)
6/26/2019 World Congress on Engineering 2015
www.iaeng.org/WCE2015/committee.html 1/4
London, U.K., 1-3 July, 2015
Conferences Publications Membership About IAENG FAQ Contact Us
The WCE 2015 Program Committee
As the WCE 2015 is organized by the International Association of Engineers and the Engineering Letters, some of the editorial boardmembers of the Engineering Letters and the IAENG journals and the committee members of IAENG Societies are taking part in the2015 International Program Committee.
WCE Congress Co-chairs
Prof. Alexander M. KorsunskyProfessor of Engineering Science Fellow and Former Dean, Trinity CollegeDepartment of Engineering Science, University of Oxford, UK
Prof. Andrew HunterPro Vice Chancellor / Head of College of ScienceDean for Science, Technology and EngineeringProfessor of Computer Vision and Artificial Intelligence University of Lincoln, UK
Prof. David WL Hukins, CPhys, FinstP, FIPEM, FRSEEmeritus Professor of Biomedical Engineering &Former Head of the School of Mechanical Engineering,University of Birmingham, UK
Prof. Len Gelman (honorary co-chair) Professor and Chair in Vibro-Acoustic Monitoring, Chairman of the Condition Monitoring Technical Committee, the British Institute of NDT,Director, Centre of Vibro-Acoustics and Fatigue, Director, International Institute of Acoustics and Vibration (USA) Cranfield University, UK
Dr. Christopher John Hogger (honorary co-chair) Emeritus Senior Lecturer Department of ComputingImperial College London, UK
Prof. Darek J. Ceglarek (ICMEEM honorary co-chair)Professor, International Manufacturing Centre, University of Warwick, UK Professor, Department of Industrial and Systems EngineeringThe University of Wisconsin-Madison, USAFellow of CIRP; Associate Editor, IEEE Transactions on Automation Science andEngineering, and ASME Transactions on Manufacturing Science and Engineering
Dr. Stephen Payne (ICSBB honorary co-chair)University Lecturer in BioMedical EngineeringDean of Degrees Keble College, Head of Physiological Understanding through Modelling,Monitoring and Analysis Group, Department of Engineering Science, University of Oxford, UK
Dr. S. I. Ao (Congress secretary)Ph.D. University of Hong Kong; Post-doc Oxford University Computing Laboratory,University of Oxford, U.K. & Harvard School of Engineering and Applied Sciences, Harvard
6/26/2019 World Congress on Engineering 2015
www.iaeng.org/WCE2015/committee.html 2/4
University, USA;Former Visiting Professor, Cranfield University, UK & University of Wyoming, USA Editor-in-chief of Journal: Engineering Letters
Congress Program Committee & Conferences Co-Chairs
Prof. Munir Ahmad University of Teesside, UK
Dr. Ioannis Alexandrou University of Liverpool, UK
Dr. Waleed Al-Nuaimy University of Liverpool, UK
Dr. Bala P. Amavasai Sheffield Hallam University, UK
Dr. An, Yoon-Young Electronics and Telecommunications Research Institute, South Korea
Dr.. Ezendu Ariwa London Metropolitan University, UK
Prof. Josu Arteche Universidad del Pais Vasco Euskal Herriko Unibertsitatea, Spain
Prof. Francesco Audrino University of St. Gallen, Switzerland
Dr. Aladdin Ayesh De Montfort University, UK
Dr. Chris Baber The University of Birmingham, UK
Prof. Colin Bailey The University of Manchester, UK
Dr. Javier Barria Imperial College London, UK
Dr. Jitka Bartosova University of Economics, Czech Republic
Dr. Khaled Benkrid The University of Edinburgh, UK
Dr. Hans Bleijs University of Leicester, UK
Dr. Michael Bluck Imperial College London, UK
Prof. Indranil Bose The University of Hong Kong, Hong Kong
Prof. Paula R. Bouzas University of Granada, Spain
Prof. Paul M Braiden Newcastle University, UK
Prof. Mietek Brdys The University of Birmingham, UK
Dr. Gaetano Burriesci University College London, UK
Prof. Mario Cannataro University "Magna Graecia" of Catanzaro, Italy
Prof. Alexandre Carvalho Institute of Applied Economics Research (IPEA), Brazil
Prof. Chin-Chen Chang Feng Chia University, Taiwan
Dr. Dechang Chen Uniformed Services University of the Health Sciences, USA
Dr. Guanghui George Chen University of Southampton, UK
Prof. Yuh-Shyan Chen National Taipei University, Taiwan
Dr. Francisco Chiclana De Montfort University, UK
Dr. Alastair Cooke Cranfield University, UK
Dr. Diganta Bhusan Das Loughborough University, UK
Dr. Darryl N Davis University of Hull, UK
Prof. Iyad Dayoub University de Valenciennes, France
Prof. Suash Deb C. V. Raman College of Engineering, India
Prof. Ioannis C. Demetriou University of Athens, Greece
Dr. Reza S Dilmaghani King's College London, UK
Dr. Daniele Dini Imperial College London, UK
Prof. Dimitris Drikakis Cranfield University, UK
Dr. Colm Durkan University of Cambridge, UK
Prof. John Durodola Oxford Brookes University, UK
Dr. Kamran Etebar Kingston University, UK
Dr. Peter Fenn University of Manchester, UK
Prof. Adelaide Figueiredo Porto School of Economics, Portugal
Prof. Giannoula Florou Kavala Institute of Technology, Greece
Dr. Steven Freear University of Leeds, UK
Prof. Bogdan Gabrys Bournemouth University, UK
Prof. Graham H. Galbraith Glasgow Caledonian University, UK
Prof. Philip H Gaskell University of Leeds, UK
Dr. Elena Gaura Coventry University, UK
Prof. Zhao-qiang Ge Xi'an Jiaotong University, China
Dr. H. Ghafouri-Shiraz The University of Birmingham, UK
Dr. Mohammad Ghavami King's College London, UK
Dr. Kostas Giannopoulos The British University in Dubai, United Arab Emirates
Prof. Rosa Eva Pruneda Gonzalez University of Castilla-La Mancha, Spain
Prof. Angel Marin Gracia de la Universidad Politecnica de Madrid, Spain
Prof. Christos Grecos University of West of Scotland, UK
Dr. Lin Guan Loughborough University, UK
Dr. Nalan Gulpinar University of Warwick, UK
Prof. Renkuan Guo University of Cape Town, South Africa
Dr. Yakun Guo University of Aberdeen, UK
Dr. Y. Hardalupas Imperial College London, UK
Prof. Li He Durham University, UK
Prof. Josep R. Herrero Polytechnic University of Catalonia, Spain
Dr. Ben James Hicks University of Bath, UK
Dr. Evor L. Hines University of Warwick, UK
Prof. Simon Hodgson University of Teesside, UK
Dr Alton Horsfall Newcastle University, UK
Dr. Patrick Hosein Ericsson Inc., USA
Prof. Fun Hu University of Bradford, UK
6/26/2019 World Congress on Engineering 2015
www.iaeng.org/WCE2015/committee.html 3/4
Prof. Huosheng Hu University of Essex, UK
Dr. Winifred Ijomah University of Bath, UK
Prof. Ji Ming Queen's University Belfast, UK
Dr. Anne James Coventry University, UK
Dr. Peter Jancovic University of Birmingham, UK
Dr. Arshad Jhumka University of Warwick, UK
Prof. Fairouz Kamareddine Heriot-Watt University, UK
Prof. Rajgopal Kannan Louisiana State University, USA
Prof. M. Elif Karsligil Yildiz Technical University, Turkey
Prof. Salih Turan Katircioglu Eastern Mediterranean University, North Cyprus
Prof. Allali Khalid Faculte des Sciences et Techniques de Settat, France
Prof. Antonis Kokossis University of Surrey, UK
Dr. Konstantinos Kontis University of Manchester, UK
Dr. M. Oguzhan Kulekci National Research Institute of Electronics & Cryptology, Turkey
Prof. Algirdas Laukaitis Vilnius Gedinimas Technical University, Lithuania
Prof. Mark Leeson University of Warwick, UK
Prof. Mukesh C Limbachiya Kingston University, UK
Prof. Layuan Li Wuhan University of Technology, China
Prof. Lin Li The University of Manchester, UK
Prof. Phone Lin National Taiwan University, Taiwan
Dr. Wing-Kuen Ling King's College London, UK
Prof. Elsa M. Macias Lopez Las Palmas de Gran Canaria University, Spain
Dr. Terese Lovas University of London & University of Cambridge, UK
Prof. Michele Luglio University of Rome "Tor Vergata", Italy
Prof. Stefano Mainardi Card. S. Wyszynski University, Poland
Prof. Prabhat K. Mahanti University of New Brunswick, Canada
Dr. Ioannides Marinos Higher Technical Institute, Cyprus
Prof. Paul Maropoulos University of Bath, UK
Dr. Paul Mativenga The University of Manchester, UK
Dr. George Mavrommatis Hellenic National Centre for Public Administration, Greece
Prof. S.G. Meintanis National and Kapodistrian University of Athens, Greece
Prof. Yezid Donoso Meisel Universidad del Norte, Colombia
Dr. Samir Mekid The University of Manchester, UK
Prof. Christos Mias University of Warwick, UK
Prof. Annie Morin University of Rennes 1, France
Prof. Nysret Musliu Vienna University of Technology, Austria
Prof. Farhad Nabhani University of Teesside, UK
Prof. Raouf Naguib Coventry University, UK
Dr. Oluremi Olatunbosun The University of Birmingham, UK
Dr. Sarah Olsen Newcastle University, UK
Prof. A. Alper Ozalp Uludag University, Turkey
Prof. Ai-Chun Pang National Taiwan University, Taiwan
Dr. William K-S. Pao The University of Manchester, UK
Prof. Miquel Angel Piera McLeod Institute for Simulation Sciences - Spanish Center, Spain
Prof. Francesco Pinciroli City University of London, UK
Dr. Theodor D. Popescu National Institute for Research and Developent in Informatics, Romania
Prof. Henry Power The University of Nottingham, UK
Prof. Philip D Prewett University of Birmingham, UK
Dr. Ghanim A. Putrus Northumbria University, UK
Prof. Chris Railton University of Bristol, UK
Prof. Marina Resta Universita' degli Studi di Genova, Italy
Dr. Mihailo Ristic Imperial College London, UK
Prof. Rajat Roy University of Warwick, UK
Dr. Alessandra Russo Imperial College London, UK
Dr. Fariba Sadri Imperial College of Science, Technology and Medicine, UK
Prof. M. Necip Sahinkaya University of Bath, UK
Prof. Toshio Sakata Kyushu University, Japan
Prof. Sana Salous University of Durham, UK
Prof. Sergei Sazhin The University of Brighton, UK
Dr. Germana Scepi University of Naples, Italy
Prof. Lakmal Seneviratne King's College London, UK
Prof. Quah Tong Seng Nanyang Technological University, Singapore
Prof. Noel Shammas Staffordshire University, UK
Dr. Duncan ET Shepherd University of Birmingham, UK
Dr. Tim Short University of Liverpool, UK
Dr. Nazmul Siddique University of Ulster at Magee, UK
Prof. Riti Singh Cranfield University, UK
Dr. Konstantinos Sirlantzis University of Kent, UK
Dr. Agusti Solanas Rovira i Virgili University, Spain
Dr. Tania Stathaki Imperial College London, UK
Prof. Andrew Todd-Pokropek University College London, UK
Prof. Fernando J.Velez University of Beira Interior, Portugal
Prof. Ana Maria Piquer Vicent Universidad Jaume, Spain
Dr. Bal Virdee London Metropolitan University, UK
Dr. Robert John Walters University of Southampton, UK
Dr Charles H.-T. Wang University of Aberdeen, UK
6/26/2019 World Congress on Engineering 2015
www.iaeng.org/WCE2015/committee.html 4/4
Prof Jiangzhou Wang University of Kent, UK
Dr Jihong Wang University of Liverpool, UK
Prof. Wen Wang University of London, UK
Prof. Xue-Zhong Wang University of Leeds, UK
Dr. Mark Ware University of Glamorgan, UK
Dr. Philip Webb The University of Nottingham, UK
Dr. Dongsheng Wen University of London, UK
Prof. Jennifer Wen Kingston University, UK
Prof. Alastair Wood University of Bradford, UK
Dr. Roy Woodhead Oxford Brookes University, UK
Dr. John Woods University of Essex, UK
Prof. Q H Wu The University of Liverpool, UK
Prof Sergei V. Utyuzhnikov University of Manchester, UK
Prof. Hongming Xu The University of Birmingham, UK
Dr. Yongbing Xu The University of York, UK
Prof. Yong Yan University of Kent, UK
Prof. Gi-Chul Yang Mokpo National University, South Korea
Prof. Wuqiang Yang The University of Manchester, UK & MIT, USA
Prof. Xin-She Yang Middlesex University, UK
Prof. Hsiang-Fu Yu National Taipei University of Education, Taiwan
Dr. Yuyang Zhao University of Cambridge & University of Bath, UK
Prof. Valentina Zharkova University of Bradford, UK
Prof. Constantin Zopounidis Technical University of Crete, Greece
WCE Conferences Committees:
ICAEM'15 Conference Committee Members
ICCIIS'15 Conference Committee Members
ICCSDE'15 Conference Committee Members
ICCSE'15 Conference Committee Members
ICDMKE'15 Conference Committee Members
ICEEE'15 Conference Committee Members
ICFE'15 Conference Committee Members
ICIE'15 Conference Committee Members
ICISIE'15 Conference Committee Members
ICME'15 Conference Committee Members
ICMEEM'15 Conference Committee Members
ICPDC'15 Conference Committee Members
ICSBB'15 Conference Committee Members
ICSIE'15 Conference Committee Members
ICWN'15 Conference Committee Members
6/26/2019 World Congress on Engineering 2015
www.iaeng.org/WCE2015/program.html 1/9
London, U.K., 1-3 July, 2015
Conferences Publications Membership About IAENG FAQ Contact Us
Conference Program
The WCE 2015 is organized by the International Association of Engineers (IAENG), a non-profit international association for theengineers and the computer scientists. The conference has the focus on the frontier topics in the theoretical and applied engineeringand computer science subjects. The WCE conferences serve as good platforms for our members and the entire engineering communityto meet with each other and to exchange ideas. The last WCE congress has attracted more than one thousand participants from over30 countries.
WCE Best Paper Awards
The candidate papers are judged on originality, significance, correctness, and clarity.
The Best Paper Awards and Best Student Paper Awards of the WCE 2015
WCE 2015 Program Schedule Details
The summary of submissions and accepted papers in WCE 2015 is as followed:Total number of submissions received in WCE 2015: 713 Total number of papers that have been accepted for WCE 2015: 362 (Acceptance rate: 50.63%)
The titles and contact authors of submitted papers that have been reviewed and accepted (or accepted with minor revisions) for WCE2015 are listed here:
titles_A_D, titles_E_N, titles_O_Others.
For reference, the WCE 2015 Keynote and Invited Speakers are as followed:
WCE Keynote Speaker I:
Professor Alexander M. KorsunskyProfessor of Engineering Science Fellow and Former Dean, Trinity College Department of Engineering Science, University of Oxford, U.K.
WCE Keynote Speaker II:
Professor Len GelmanProfessor and Chair of Vibro-Acoustic MonitoringEngineering Sciences Division, School of EngineeringCranfield University, UK;Chairman of the Condition Monitoring Technical Committee, British Institute of NDT Director, Centre of Vibro-Acoustics and Fatigue Chairman, the International Society for Condition Monitoring President-Elect, the International Institute of Acoustics and Vibration
WCE Keynote Speaker III:
Professor Sergei SazhinProfessor of Thermal Physics Sir Harry Ricardo Laboratories School of Computing, Engineering and Mathematics University of Brighton, UK
ICEEE Invited Speaker:
Dr. Mark Leeson Reader and Head of Communications Research Group School of Engineering University of Warwick, UK
ICME Invited Speaker I:
Dr. Manosh Paul Senior Lecturer in Thermofluids Systems, Power & Energy Research Division School of Engineering University of Glasgow, UK
6/26/2019 World Congress on Engineering 2015
www.iaeng.org/WCE2015/program.html 2/9
ICME Invited Speaker II:
Prof. Yun Wang Associate Professor of Mechanical and Aerospace Engineering Director of The Renewable Energy Resources Laboratory University of California, Irvine USA
ICISIE Invited Speaker:
Dr. Maaruf Ali Programme Leader in Computing in China in BSc(Hons) Mobile Computing and Communications Hangzhou Dianzi University, China & School of Architecture, Computing and Engineering University of East London, UK
For reference, the WCE 2014 Keynote and Invited Speakers were as followed:
WCE Keynote Speaker I:
Professor Len GelmanProfessor and Chair of Vibro-Acoustic MonitoringEngineering Sciences Division, School of EngineeringCranfield University, UK;Chairman of the Condition Monitoring Technical Committee, British Institute of NDT Director, Centre of Vibro-Acoustics and Fatigue Chairman, the International Society for Condition Monitoring President-Elect, the International Institute of Acoustics and Vibration
WCE Keynote Speaker II:
Professor Alexander M. KorsunskyProfessor of Engineering Science Fellow and Former Dean, Trinity College Department of Engineering Science, University of Oxford, U.K.
WCE Invited Tutorial:
Professor Anca Daniela Ionita Professor Automatic Control and Computers Faculty University POLITEHNICA of Bucharest Romania
For reference, the WCE 2013 Keynote and Invited Speakers are as followed:
WCE Keynote Speaker I:Prof. Vaidy Sunderam Samuel Candler Dobbs Professor of Computer Science & Chair of Mathematics and Computer ScienceEmory University, USAEmail: [email protected]
WCE Keynote Speaker II:Prof. Sergei Sazhin Professor of Thermal Physics Sir Harry Ricardo Laboratories, School of Computing, Engineering and Mathematics University of Brighton, UKEmail: [email protected]
WCE Keynote Speaker III:Prof. Len GelmanProfessor and Chair in Vibro-Acoustic Monitoring, Chairman of the Condition Monitoring Technical Committee, the British Institute of NDT,Director, Centre of Vibro-Acoustics and Fatigue, Director, International Institute of Acoustics and Vibration (USA) Cranfield University, UK Email: [email protected]
ICSIE Keynote Speaker:Prof. Habib ZaidiHead of PET Instrumentation & Neuroimaging Laboratory (PINLab) Geneva University Hospital, Switzerland &Professor of Medical PhysicsUniversity Medical Center of Groningen, The NetherlandsEmail: [email protected]
6/26/2019 Proceedings of WCE 2015, July 1 - 3, 2015, London, U.K., IAENG Open Access Publication
www.iaeng.org/publication/WCE2015/ 1/20
Wednesday, June 26, -1781
Proceedings of the World Congress on Engineering 2015
WCE 2015, July 1-3, 2015, London, U.K.
The World Congress on Engineering 2015 has been organized by the International Association ofEngineers (IAENG), a non-profit international association for the engineers and the computerscientists. The WCE 2015 takes place in Imperial College London, London, U.K., 1-3 July, 2015.
The congress scope covers the frontier topics in the theoretical and applied engineering andcomputer science subjects. The WCE conferences serve as excellent platforms for our membersand the entire engineering community to meet with each other and to exchange ideas. Theconferences also strike a balance between theoretical development and applications.
WCE 2015 has been organized with the help of conference committees incorporating over threehundred committee members who are prominent in the field as research center heads, facultydeans, department heads, professors, and leading research scientists from over 30 countries. WCEconferences are truly international meetings with participants from many countries across theworld.
WCE 2015 has attracted more than seven hundred paper submissions from over 50 countries. Allsubmitted papers have been peer reviewed. The total number of submissions to WCE 2015reviewed was 713. With the total number of 362 papers accepted, the overall acceptance rate atthe congress is 50.63%.
Editors: S. I. Ao and Len Gelman and David WL Hukins and Andrew Hunter and A. M.Korsunsky
ISBN of Vol I (pp1-669): 978-988-19253-4-3
ISBN of Vol II (pp670-1335): 978-988-14047-0-1
Publisher: Newswood Limited
Organization: International Association of Engineers
CONFERENCE PAPERS:
WCE 2015
Conference Home
Conference Committee
Coming Conference
Order Conference Publication
Contact Us
Join IAENG Now!
IAENG Membership is free.
Our societies welcome committeemembers too.
Our journals are waiting for yourinvolvement.
The 2015 International Conference of Applied and Engineering Mathematics
The Unified Transform for a Class of Reaction-Diffusion Problems with Discontinuous Time Dependent Parameters
M. Asvestas, E.P. Papadopoulou, A.G. Sifalakis, and Y.G. Saridakis
Proceedings of The World Congress on Engineering 2015, pp1-6 [Online Full Text]
M. Asvestas, E.P. Papadopoulou, A.G. Sifalakis, and Y.G. Saridakis, "The Unified Transform for a Class of Reaction-Diffusion Problems with Discontinuous Time DependentParameters," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1-6
Realization of Program Motion of a Gyrostat with Variable Inertia Moments
Sergey Bezglasnyi
Proceedings of The World Congress on Engineering 2015, pp7-9 [Online Full Text]
Sergey Bezglasnyi, "Realization of Program Motion of a Gyrostat with Variable Inertia Moments," Lecture Notes in Engineering and Computer Science: Proceedings of TheWorld Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp7-9
Coprime Factorizability and Stabilizability of Plants by Adding Some Objects
Kazuyoshi MORI
Proceedings of The World Congress on Engineering 2015, pp10-13 [Online Full Text]
Kazuyoshi MORI, "Coprime Factorizability and Stabilizability of Plants by Adding Some Objects," Lecture Notes in Engineering and Computer Science: Proceedings of TheWorld Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp10-13
Model to Predict the Lowness of Entropy at the Big Bang with Relativistic Equations
R. Leticia Corral Bustamante, and Marco A. Flores Trevizo
Proceedings of The World Congress on Engineering 2015, pp14-19 [Online Full Text]
R. Leticia Corral Bustamante, and Marco A. Flores Trevizo, "Model to Predict the Lowness of Entropy at the Big Bang with Relativistic Equations," Lecture Notes in Engineeringand Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp14-19
Existence Results for a Second-order Difference Equation with Summation Boundary Conditions at Resonance
Thanin Sitthiwirattham, and Saowaluk Chasreechai
Proceedings of The World Congress on Engineering 2015, pp20-24 [Online Full Text]
Thanin Sitthiwirattham, and Saowaluk Chasreechai, "Existence Results for a Second-order Difference Equation with Summation Boundary Conditions at Resonance," LectureNotes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp20-24
Interpolation Theorems for Weighted Sobolev Spaces
Leili Kussainova, and Ademi Ospanova
Proceedings of The World Congress on Engineering 2015, pp25-28 [Online Full Text]
Leili Kussainova, and Ademi Ospanova, "Interpolation Theorems for Weighted Sobolev Spaces," Lecture Notes in Engineering and Computer Science: Proceedings of TheWorld Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp25-28
Statistical Process Control Methods for Individual Observations
L. Jaupi, Ph. Durand, and D. Ghorbanzadeh
Proceedings of The World Congress on Engineering 2015, pp29-33 [Online Full Text]
L. Jaupi, Ph. Durand, and D. Ghorbanzadeh, "Statistical Process Control Methods for Individual Observations," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp29-33
Interaction of Fractional Order Theories in Micropolar Thermoelastic Solid due to Ramp Type Heating
Rajneesh Kumar, and Kulwinder Singh
Proceedings of The World Congress on Engineering 2015, pp34-39 [Online Full Text]
Rajneesh Kumar, and Kulwinder Singh, "Interaction of Fractional Order Theories in Micropolar Thermoelastic Solid due to Ramp Type Heating," Lecture Notes in Engineeringand Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp34-39
The Unified Transform for a Class ofReaction-Diffusion Problems with Discontinuous
Time Dependent ParametersM. Asvestas, E.P. Papadopoulou, A.G. Sifalakis and Y.G. Saridakis
Abstract—Reaction-diffusion mathematical models for study-ing, among others, highly diffusive brain tumors, that alsotake into account the heterogeneity of the brain tissue, arefrequently used in recent years. Current work, considers ageneralized class of such reaction-diffusion models that alsoallows both diffusion and reaction parameters to dependcontinuously in time. A series of transforms are applied toproduce an integral representation of the problem’s solution.Main approach used is Fokas unified transform which yieldsnovel integral representations of the solution in the complexplane that, for appropriately chosen integration contours, decayexponentially fast and converge uniformly at the boundaries.Combining these method-inherent advantages with numericalintegration techniques on hyperbolic contours, we produce anefficient method, with fast decaying error properties, for thesolution of the multi-domain reaction-diffusion model problem.
Index Terms—Reaction-Diffusion PDEs, Brain tumors, Uni-fied transform, Fokas method.
I. INTRODUCTION
Reaction-diffusion linear PDEs have been the corebiomathematical model for studying highly invasive andaggressive forms of brain tumors for many years now (e.g.[10], [7] and the references therein). The driving differentialequation of the basic model has the form
∂c
∂t= ∇ · (D∇c) + ρ c, (1)
where c(x, t) denotes the tumor cell density at location x andtime t, ρ denotes the net proliferation rate (0.012 1/day, cf.[2]), and D is the diffusion coefficient representing the activemotility of malignant cells (0.0013 cm2/day, cf. [16]). Themodel also considers zero flux boundary conditions, whichimpose no migration of cells beyond the brain boundaries,and an initial condition c(x, 0) = f(x), where f(x) is theinitial spatial distribution of malignant cells.
Predicting a linear growth of the mean tumor diameteron MRI, Swanson (cf. [14], [15]) incorporated brain’s tissueheterogeneity (white-gray matter) into the basic model byconsidering D be defined by
D ≡ D(x) =
Dw, x in white matter (x ∈ Ωw)
Dg, x in gray matter (x ∈ Ωg), (2)
Manuscript received March 10, 2015; revised April 10, 2015.This work was supported by the ESF and Greek national funds through
the operational program Education and Lifelong Learning of the NationalStrategic Reference Framework (NSRF) THALES (Grant number: MIS-379416).
All authors are with the Applied Math & Computers Lab, TechnicalUniversity of Crete, 73100 Chania, Crete, Greece
Email of the corresponding author : [email protected]
where Dw and Dg are scalars with Dw > Dg .The above important model problem may be considered
as part of a more general class of problems characterized bythe fact that both diffusion and reaction parameters dependalso in time. To be more specific, we’ll assume that
D(x, t) = χ(t)D(x) and ρ ≡ ρ(t) , (3)
where χ(t) 6= 0 and ρ(t) 6= 0 are continuous functions oft. In such a case, models that would, for example, allowboth motility and proliferation of malignant cells to changein time are also included.
Assuming, for compatibility purposes, the same physicalunits and using the dimensionless variables (see also [14],[15] for an analogous treatment)
t = ρ0t , x =
√ρ0
χ0Dwx , χ(t) =
χ(ρ0t)
χ0, γ =
Dg
Dw,
(4)hence
D ≡ D(x) =
1, x ∈ Ωw
γ, x ∈ Ωg, D(x, t) = χ(t)D(x), (5)
ρ ≡ ρ(t) =1
ρ0ρ(ρ0t) , f(x) = f
(√ρ0
χ0Dwx
), (6)
and
c(x, t) =χ0Dw
ρ0N0c
(√ρ0
χ0Dwx, ρ0t
), (7)
with N0 =∫f(x)dx to denote the initial number of tumor
cells in the brain at t0 = 0, ρ0 = ρ(t0) and χ0 = χ(t0), onemay easily arrive at the dimensionless equation
∂
∂tc(x, t) = ∇ · (D(x, t)∇c(x, t)) + ρ(t)c(x, t) . (8)
Referring, now, to the above equation we proceed in the nextsections as follows:• Initially, by using appropriate transformations and
change of variables, we reduce the above equation intoan equivalent one with constant diffusion coefficient.
• In the sequel, for the one space dimension problemand by using the Fokas unified transform method (cf.[3], [4]), we produce an integral representation of thesolution in the complex plane that, for an appropriatelychosen integration contour, decay exponentially fast.
• Finally, we apply efficient numerical integration tech-niques, with fast decaying error properties, for thenumerical evaluation of the solution’s integral represen-tation.
We remark that our work here extends and completes theworks in [9] and [1].
Proceedings of the World Congress on Engineering 2015 Vol I WCE 2015, July 1 - 3, 2015, London, U.K.
ISBN: 978-988-19253-4-3 ISSN: 2078-0958 (Print); ISSN: 2078-0966 (Online)
WCE 2015
Abstract—In paper the task about stabilization of program
motions of a balanced gyrostat with time-dependent inertia moments is considered. The active stabilizing control attached to the gyrostat by the principle of feedback is constructed. Conditions under which the desirable program motions property of asymptotic stability is possible are received. The task is solved on the base of a method of Lyapunov functions and a method of the limit equations and the limit systems.
Index Terms—Gyrostat, active control, Lyapunov function, feedback, stabilization.
I. INTRODUCTION
ROBLEMS about spatial orientation of satellites and aircraft in an orbit have important applied value and are
widely considered by authors in many notes. Spatial motions of aircraft concerning the center of masses are modeled by spherical motions of solid bodies or systems of bodies, in particular, gyrostats. The basic methods and principles of control of rotational motions of bodies and systems were studied, for example, in notes [1-3]. Modern domestic and foreign writers investigate tasks about stability of equilibrium positions and stationary motions of gyrostats in orbits [4, 5], about resonant and chaotic modes of motions [6, 7], about stabilization of the set program motions of gyrostats of various structure [8, 9].
This paper is devoted to research of opportunities of realization of program motions concerning the center of masses of two coaxial bodies system (gyrostat) of variable structure. As a gyrostat of variable structure two bodies – the carrier and the rotor allowing relative rotation round the general axis are considered. The rotor has time-dependent inertia moments. In paper the problem of stabilization is solved by active external control by the principle of feedback. The presented results are received on the base of a method of Lyapunov functions of the classical stability theory and of a method of the limit equations and limit systems [10].
II. PROBLEM DEFINITION AND MOTION EQUATIONS
Let O is an inertial coordinate system; O is
coordinate system randomly moving generally in relation to inertial system of coordinates. The gyrostat represents
Manuscript received March 22, 2015. This work is in the framework of the national tasks of the Ministry of Education and Science of the Russian Federation (project no. 9.540.2014/K).
Sergey Bezglasnyi is an Associate Professor of the Samara State Aerospace University, Samara, 443086 Russia (corresponding author to provide phone: 8-917-104-1316; e-mail: [email protected]).
system of two solid bodies. Body 1T is the carrier and body
2T is rotor which rotates around with the angular speed 02 (0,0, ) directed on an axes Oz of not inertial
coordinate system Oxyz , rigidly connected with the carrier
(the symbol ( ) denotes transposing). The angle ( )t
of rotor rotation is a continuous function of time. 2 2 2Ox y z is
rigidly connected with the rotor coordinate system. Axis Oz and 2Oz are coincide.
We will assume that the centers of mass 1O and 2O both
bodies are on the general axis of rotation and don't change the positions ( 1 2O O const ), the general center of mass of
a gyrostat is in a point O (Fig. 1). We will consider that the
rotor have the time-dependent inertia moments, and not changing positions of the centers of mass of both bodies. As a result the center of mass of all system have constant position in the point .O The condition about dependence of a tensor of inertia of a body on time allows to characterize existence of mobile parts of a design, redistribution or motion of masses in a gyrostat.
Let are set two mutually perpendicular basis vectors 01s
and 02s , holding invariable position in system of
coordinates O , and let are set two mutually
perpendicular basis vectors 01r and 02r , permanently
connected with system of coordinates Oxyz . We will put:
03 01 02 03 01 02,s s s r r r .
Realization of Program Motion of a Gyrostat with Variable Inertia Moments
Sergey Bezglasnyi
P
Fig. 1. Gyrostat.
Proceedings of the World Congress on Engineering 2015 Vol I WCE 2015, July 1 - 3, 2015, London, U.K.
ISBN: 978-988-19253-4-3 ISSN: 2078-0958 (Print); ISSN: 2078-0966 (Online)
WCE 2015
Coprime Factorizability and Stabilizability of
Plants by Adding Some ObjectsKazuyoshi MORI
Abstract—This paper is concerned with the factorizationapproach to control systems. We consider the models in whichsome plants admit or do not admit coprime factorization.In the case where the plants admits only one-side coprimefactorization, it is known that the plant with additional zerosadmits both side coprime factorizations. However we show thatin the case where the plant do not admit coprime factorization,there exists a case where the plant with any additional zeroscannot admit coprime factorization. We will also consider theparallel plants, in which one of them is plant to be stabilized.Any stabilizable plants has some parallel plants that admitboth side coprime factorizations. However, we will show thatunstabilizable plants is not able to construct such parallelplants.
Index Terms—Linear systems, Feedback stabilization, Co-prime factorization over commutative rings
I. INTRODUCTION
IN the factorization approach[1], [2], [3], [4], a transfer
function is given as the ratio of two stable causal transfer
functions and the set of stable causal transfer functions forms
a commutative ring.
Since stabilizing controllers are not unique in general, the
choice of stabilizing controllers is important for the resulting
closed loop. In the classical case such as continuous-time
LTI systems and discrete-time LTI systems, the stabiliz-
ing controllers can be parameterized by the method called
“Youla-parameterization”[1], [2], [4], [5] (also called Youla-
Kucera-parameterization). However, there exist models in
which some stabilizable transfer matrices do not have their
right-/left-coprime factorizations in general[6], [7]. In such
models, we cannot employ the Youla-parameterization in
general.
We consider the models in which some plants admit or
do not admit coprime factorization. In the case where the
plants admits only one-side coprime factorization, it is known
that the plant with additional zeros admits both side coprime
factorizations. However we show that in the case where
the plant do not admit coprime factorization, there exists a
case where the plant with any additional zeros cannot admit
coprime factorization. We will also consider the parallel
plants, in which one of them is plant to be stabilized. Any
stabilizable plants has some parallel plants that admit both
side coprime factorizations. However, we will show that
unstabilizable plants has not able to construct such parallel
plants.
II. PRELIMINARIES
In the following we begin by introducing notations used
in this paper. Then we give the formulation of the feedback
Manuscript received March 23, 2015; revised April 6, 2015.K. Mori is School of Computer Science and Engineering The
University of Aizu, Aizu-Wakamatsu 965-8580, JAPAN email:[email protected].
stabilization problem.
A. Notations
a) Commutative Rings: We will consider that the set
of all stable causal transfer functions is a commutative ring,
denoted by A. The total ring of fractions of A is denoted
by F ; that is, F = n/d |n, d ∈ A, d is a nonzerodivisor.
This will be considered to be the set of all possible transfer
functions. If the commutative ring A is an integral domain, Fbecomes a field of fractions of A. However, if A is not an
integral domain, then F is not a field, because any nonzero
zerodivisor of F is not a unit.
b) Matrices: Suppose that x and y denote sizes of
matrices.
The set of matrices over A of size x × y is denoted
by Ax×y. In particular, the set of square matrices over Aof size x is denoted by (A)x. A square matrix is called
singular over A if its determinant is a zerodivisor of A, and
nonsingular otherwise. The identity and the zero matrices
are denoted by Ix and Ox×y , respectively, if the sizes are
required, otherwise they are denoted simply by I and O.
Matrices A and B over A are right-coprime over A if there
exist matrices X and Y over A such that XA + Y B = I .
Analogously, matrices A and B over A are left-coprime
over A if there exist matrices X and Y over A such that
AX + BY = I . Further, pair (N,D) of matrices N and Dis said to be a right-coprime factorization of P over A if (i)
the matrix D is nonsingular over A, (ii) P = ND−1 over F ,
and (iii) N and D are right-coprime over A. Also, pair
(N , D) of matrices N and D is said to be a left-coprime
factorization of P over A if (i) D is nonsingular over A, (ii)
P = D−1N over F , and (iii) N and D are left-coprime
over A. As we have seen, in the case where a matrix is
potentially used to express left fractional form and/or left
coprimeness, we usually attach a tilde ‘˜’ to a symbol; for
example N , D for P = D−1N and Y , X for Y N+XD = I .
B. Feedback Stabilization Problem
The stabilization problem considered in this paper follows
that of Sule in [8] and Mori and Abe in [9] who consider the
feedback system Σ [3, Ch.5, Figure 5.1] as in Figure 1. For
further details the reader is referred to [3], [9]. Throughout
this paper, the plant we consider has m inputs and n outputs,
and its transfer matrix, which itself is also called simply a
plant, is denoted by P and belongs to Fn×m.
Definition 1: Define Fad by
Fad = (X,Y ) ∈ Fx×y ×Fy×x |det(Ix +XY ) is a unit of F ,x and y are positive integers.
Proceedings of the World Congress on Engineering 2015 Vol I WCE 2015, July 1 - 3, 2015, London, U.K.
ISBN: 978-988-19253-4-3 ISSN: 2078-0958 (Print); ISSN: 2078-0966 (Online)
WCE 2015
Abstract—In this work it is proposed a metric to modeling a certain kind of the “lowness” of entropy that must have existed in the past with the objective of know if it is equivalent to the state of high entropy of the present, taking into account the gravitational clumping of matter both for the singularity at the big bang, as for a black hole. The state of low entropy as a very special case of the Big Bang singularity (gravitational clumping of matter), supported by the Penrose´s Weyl curvature hypotesis ( Penrose´s WCH), is studied here by developing a standard metric to discuss whether it is possible to link to the also gravitational clumping of matter corresponding to a black hole in the classical phase-space volume (CPSV), placing such groupings in the same number of Hawking´s box and therefore, in the time. It satisfies the Penrose's WCH detaching it from the classic phase-space volume (CPSV) that turns out to be inappropriate as WCH´s link that requires the second law of thermodynamics by the asymmetrical-time ingredient that presents the entropy in the past and in the present.
It emphasizes the need to discover a mathematical space that allow us to obtain the link between WCH and CPSV with the combination of variables that represent the past, present, high and low entropy.
Index Terms—asymmetrical-time, general relativity, Ricci tensor, Weyl curvature hypothesis, Weyl tensor
I. INTRODUCTION
his paper discusses the idea of Roger Penrose about the low power state in the Big Bang which gives us the second law of thermodynamics, involved in his Weyl
curvature hypothesis (WCH)) from thirty-three years ago [1]. Since then, although there have been numerous cosmological models, these results show that they only satisfy the WCH but have not allowed the linking of WCH and classical phase-space volume (CPSV) [2,3].
We know there is an ingredient of asymmetrical-time [1,2,7-9] with second law implications for the unification of CPSV and WCH.
Therefore, it is a priority to discover a mathematical space that complements WCH, as the CPSV turns out to be
Manuscript received March 23, 2015. 1 R. Leticia Corral Bustamante is with the Technological Institute of Cuauhtémoc City, Tecnológico Ave. S/N, 31500 Cuauhtémoc City, Chihuahua, México (corresponding author phone: 625-582-3609; fax: 625-581-1707 Ext. 1000; e-mail: [email protected]).
2 Marco A. Flores Trevizo was with the Technological Institute of Cuauhtémoc City, Tecnológico Ave. S/N, 31500 Cuauhtémoc City, Chihuahua, México (e-mail: [email protected] ).
inappropriate to meet the Penrose hypothesis, not only in general relativity (GR), but also in cosmology [2,3].
With the aim of finding answers to unify the CPSV and WCH, the present study focuses on computations made in GR making use of the mathematical expression of entropy as a state of the logarithm measure of the volume [2] of matter using Ricci tensor, as well as the use of the Bekenstein-Hawking formula [2,4,9] in such tensor [4].
However, the model studied here allows to "measure the entropy", throwing results of the prevailing special state in the singularity of the Big Bang that argues the Penrose´s WCH in [2], contradicting to the CPSV.
Thus, it is inappropriate the phase-space volume occupied by the matter in the Hawking´s box to link it with Penrose`s WCH because gravity of matter introduces an additional level of unpredictability over quantum uncertainty that has not been resolved yet. To obtain entropy equivalence between past and present it is required a mathematical model not yet discovered, that clarifies the asymmetrical-time [1,2,7-9] ingredient of time.
There should be a quantum world that allows us to simultaneously measure the entropy of the past and present, like the Schrödinger´s cat scenario, alive and dead at the same time [5,6].
Asymmetrical-time [1,2,7-9] implications in measurements of entropy for study of the behavior of matter in the space-time continuum in General Relativity, is currently one of the most important issues to resolve in order to find a theory of quantum gravity [10-15] that allows unify confluence and spreading of flow lines in phase-state [13-15] in a gravitational body, according with the second law of thermodynamics, since the entropy is a quantum gravitational effect.
A strong constraint on “lowness” entropy in the big bang is that which holds that the Weyl tensor is identically zero [2,9,16-18]. In this case, as we approach the initial singularity [1,2,19-23] more and more closely, we find that Ricci tensor becomes infinite dominating near the initial singularity [2,9,24,25]. Thus Ricci dominates the initial singularity, rather than Weyl. This allows us to present arguments that have to do with the CPSV in which is discussed the high entropy by gravitational clumping in a tiny phase-space volume of Hawking´s box since point of view of Penrose [2,9,16-18].
The universe was created in a very special low entropy state with something like the 0Weyl constraint and,
according with Penrose [2], the entailment between WCH and R (quantum-mechanical state-vector reduction) is very strong at this respect, and everything seems to point in the same direction.
Model to Predict the Lowness of Entropy at the Big Bang with Relativistic Equations
R. Leticia Corral Bustamante1, Marco A. Flores Trevizo2
T
Proceedings of the World Congress on Engineering 2015 Vol I WCE 2015, July 1 - 3, 2015, London, U.K.
ISBN: 978-988-19253-4-3 ISSN: 2078-0958 (Print); ISSN: 2078-0966 (Online)
WCE 2015
6/26/2019 Proceedings of WCE 2015, July 1 - 3, 2015, London, U.K., IAENG Open Access Publication
www.iaeng.org/publication/WCE2015/ 2/20
Dropped Ball Travel Time using Variation and Integration
Dieudonne Ndong Ovono
Proceedings of The World Congress on Engineering 2015, pp40-45 [Online Full Text]
Dieudonne Ndong Ovono, "Dropped Ball Travel Time using Variation and Integration," Lecture Notes in Engineering and Computer Science: Proceedings of The WorldCongress on Engineering 2015, 1-3 July, 2015, London, U.K., pp40-45
Approximation Methods Preserving Cones of Generalized Convex Functions
D. I. Boitsov, and S. P. Sidorov
Proceedings of The World Congress on Engineering 2015, pp46-50 [Online Full Text]
D. I. Boitsov, and S. P. Sidorov, "Approximation Methods Preserving Cones of Generalized Convex Functions," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp46-50
An Estimation of Single-Synchronized Krylov Subspace Methods with Hybrid Parallelization
Seiji Fujino, and Kosuke Iwasato
Proceedings of The World Congress on Engineering 2015, pp51-54 [Online Full Text]
Seiji Fujino, and Kosuke Iwasato, "An Estimation of Single-Synchronized Krylov Subspace Methods with Hybrid Parallelization," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp51-54
Developing Two Novel Lagrange-based Algorithms for Direct Calculation of Interpolating Polynomial Coefficients
Seyed Reza Moasheri, Ali Momeni, and Seyed Majid Moasheri
Proceedings of The World Congress on Engineering 2015, pp55-60 [Online Full Text]
Seyed Reza Moasheri, Ali Momeni, and Seyed Majid Moasheri, "Developing Two Novel Lagrange-based Algorithms for Direct Calculation of Interpolating PolynomialCoefficients," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp55-60
Complexity Reduction for Parametrized Catalytic Reaction Model
Saifon Chaturantabut
Proceedings of The World Congress on Engineering 2015, pp61-65 [Online Full Text]
Saifon Chaturantabut, "Complexity Reduction for Parametrized Catalytic Reaction Model," Lecture Notes in Engineering and Computer Science: Proceedings of The WorldCongress on Engineering 2015, 1-3 July, 2015, London, U.K., pp61-65
Improved Beam Element For Geometric Non Linear Analysis
Messaoud. Bourezane
Proceedings of The World Congress on Engineering 2015, pp66-69 [Online Full Text]
Messaoud. Bourezane, "Improved Beam Element For Geometric Non Linear Analysis," Lecture Notes in Engineering and Computer Science: Proceedings of The WorldCongress on Engineering 2015, 1-3 July, 2015, London, U.K., pp66-69
Machine Learning for Self-Tuning Optical Systems
J. Nathan Kutz, Steve Brunton, and Xing Fu
Proceedings of The World Congress on Engineering 2015, pp70-73 [Online Full Text]
J. Nathan Kutz, Steve Brunton, and Xing Fu, "Machine Learning for Self-Tuning Optical Systems," Lecture Notes in Engineering and Computer Science: Proceedings of TheWorld Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp70-73
Stabilization of Gyrostat Motion with Cavity Filled with Viscous Fluid
Sergey Bezglasnyi
Proceedings of The World Congress on Engineering 2015, pp74-76 [Online Full Text]
Sergey Bezglasnyi, "Stabilization of Gyrostat Motion with Cavity Filled with Viscous Fluid," Lecture Notes in Engineering and Computer Science: Proceedings of The WorldCongress on Engineering 2015, 1-3 July, 2015, London, U.K., pp74-76
The Partial Order on Category of Semigroups and Endo-Cayley Digraphs
C. Promsakon
Proceedings of The World Congress on Engineering 2015, pp77-80 [Online Full Text]
C. Promsakon, "The Partial Order on Category of Semigroups and Endo-Cayley Digraphs," Lecture Notes in Engineering and Computer Science: Proceedings of The WorldCongress on Engineering 2015, 1-3 July, 2015, London, U.K., pp77-80
Energy Threshold Detection in Neutronic Signal by Automatic Classification and Linear Programming
Philippe Durand, Luan Jaupi, and Dariush Ghorbanzadeh
Proceedings of The World Congress on Engineering 2015, pp86-89 [Online Full Text]
Philippe Durand, Luan Jaupi, and Dariush Ghorbanzadeh, "Energy Threshold Detection in Neutronic Signal by Automatic Classification and Linear Programming," Lecture Notesin Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp86-89
Multi-Resolution Analysis of Dynamical Systems using Dynamic Mode Decomposition
J. Nathan Kutz, Steve Brunton, and Xing Fu
Proceedings of The World Congress on Engineering 2015, pp90-93 [Online Full Text]
J. Nathan Kutz, Steve Brunton, and Xing Fu, "Multi-Resolution Analysis of Dynamical Systems using Dynamic Mode Decomposition," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp90-93
Performance of the Lee-Carter State Space Model in Forecasting Mortality
Wan Zakiyatussariroh Wan Husin, Mohammad Said Zainol, and Norazan Mohamed Ramli
Proceedings of The World Congress on Engineering 2015, pp94-99 [Online Full Text]
Wan Zakiyatussariroh Wan Husin, Mohammad Said Zainol, and Norazan Mohamed Ramli, "Performance of the Lee-Carter State Space Model in Forecasting Mortality," LectureNotes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp94-99
Attitude Control and Angular Reorientations of Dual-Spin Spacecraft and Gyrostat-Satellites Using Chaotic RegimesInitiations
Anton V. Doroshin
Proceedings of The World Congress on Engineering 2015, pp100-104 [Online Full Text]
Anton V. Doroshin, "Attitude Control and Angular Reorientations of Dual-Spin Spacecraft and Gyrostat-Satellites Using Chaotic Regimes Initiations," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp100-104
Finite Element Solution to Integral Equations
Dieudonne Ndong Ovono
Proceedings of The World Congress on Engineering 2015, pp105-110 [Online Full Text]
Dieudonne Ndong Ovono, "Finite Element Solution to Integral Equations," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress onEngineering 2015, 1-3 July, 2015, London, U.K., pp105-110
6/26/2019 Proceedings of WCE 2015, July 1 - 3, 2015, London, U.K., IAENG Open Access Publication
www.iaeng.org/publication/WCE2015/ 3/20
Model Order Reduction of Continuous LTI Large Descriptor System Using LRCF-ADI and Square Root BalancedTruncation
Mehrab Hossain Likhon, Shamsil Arifeen, and Mohammad Sahadet Hossain
Proceedings of The World Congress on Engineering 2015, pp111-116 [Online Full Text]
Mehrab Hossain Likhon, Shamsil Arifeen, and Mohammad Sahadet Hossain, "Model Order Reduction of Continuous LTI Large Descriptor System Using LRCF-ADI and SquareRoot Balanced Truncation," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K.,pp111-116
Investigating the Polarization Tensor to Describe and Identify Metallic Objects
Taufiq K. A. Khairuddin, Paul D. Ledger, and William R. B. Lionheart
Proceedings of The World Congress on Engineering 2015, pp122-127 [Online Full Text]
Taufiq K. A. Khairuddin, Paul D. Ledger, and William R. B. Lionheart, "Investigating the Polarization Tensor to Describe and Identify Metallic Objects," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp122-127
Numerical Solutions of a Class of Nonlinear Volterra Integral Equation
Melusi Khumalo, and Hlukaphi Mamba
Proceedings of The World Congress on Engineering 2015, pp128-131 [Online Full Text]
Melusi Khumalo, and Hlukaphi Mamba, "Numerical Solutions of a Class of Nonlinear Volterra Integral Equation," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp128-131
Window Analysis and Malmquist Index for Assessing Efficiency in a Pharmaceutical Industry
Abbas Al-Refaie, Ruba Najdawi, Mohammad D. AL-Tahat, and Nour Bata
Proceedings of The World Congress on Engineering 2015, pp132-136 [Online Full Text]
Abbas Al-Refaie, Ruba Najdawi, Mohammad D. AL-Tahat, and Nour Bata, "Window Analysis and Malmquist Index for Assessing Efficiency in a Pharmaceutical Industry,"Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp132-136
Hermite Collocation and SSPRK Schemes for the Numerical Treatment of a Generalized Kolmogorov-Petrovskii-PiskunovEquation
I.E. Athanasakis, E.P. Papadopoulou, and Y.G. Saridakis
Proceedings of The World Congress on Engineering 2015, pp137-142 [Online Full Text]
I.E. Athanasakis, E.P. Papadopoulou, and Y.G. Saridakis, "Hermite Collocation and SSPRK Schemes for the Numerical Treatment of a Generalized Kolmogorov-Petrovskii-Piskunov Equation," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp137-142
The 2015 International Conference of Computational Intelligence and Intelligent Systems
Evaluation of Emotional Agents' Architectures: an Approach Based on Quality Metrics and the Influence of Emotions onUsers
M. O. Meira, and A. M. P. Canuto
Proceedings of The World Congress on Engineering 2015, pp143-150 [Online Full Text]
M. O. Meira, and A. M. P. Canuto, "Evaluation of Emotional Agents' Architectures: an Approach Based on Quality Metrics and the Influence of Emotions on Users," LectureNotes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp143-150
A New Optimum Signal Compression Algorithm Based on Neural Networks for WSN
Prayoth Kumsawat, Kitti Attakitmongcol, and Arthit Srikaew
Proceedings of The World Congress on Engineering 2015, pp151-156 [Online Full Text]
Prayoth Kumsawat, Kitti Attakitmongcol, and Arthit Srikaew, "A New Optimum Signal Compression Algorithm Based on Neural Networks for WSN," Lecture Notes in Engineeringand Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp151-156
Genetic Search for Face Detection
Md. Al-Amin Bhuiyan, and Fawaz Waselallah Alsaade
Proceedings of The World Congress on Engineering 2015, pp157-162 [Online Full Text]
Md. Al-Amin Bhuiyan, and Fawaz Waselallah Alsaade, "Genetic Search for Face Detection," Lecture Notes in Engineering and Computer Science: Proceedings of The WorldCongress on Engineering 2015, 1-3 July, 2015, London, U.K., pp157-162
A Modified ABC to Optimize the Parameters of Support Vector Machine for Predicting Bankruptcy
Yassine Abbazi, Khalid Jebari, and Aziz Ettouhami
Proceedings of The World Congress on Engineering 2015, pp163-167 [Online Full Text]
Yassine Abbazi, Khalid Jebari, and Aziz Ettouhami, "A Modified ABC to Optimize the Parameters of Support Vector Machine for Predicting Bankruptcy," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp163-167
Increasing Vehicular Mobility using a Backpropagation Neural Network
Jose A. Castan R., Salvador Ibarra M., Julio Laria M., Mayra G. Trevino B., Javier Guzman O., Luis J. Gonzalez, and Emilio Castan R.
Proceedings of The World Congress on Engineering 2015, pp168-171 [Online Full Text]
Jose A. Castan R., Salvador Ibarra M., Julio Laria M., Mayra G. Trevino B., Javier Guzman O., Luis J. Gonzalez, and Emilio Castan R., "Increasing Vehicular Mobility using aBackpropagation Neural Network," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London,U.K., pp168-171
The Design of an Adaptive Incremental Association Rule Mining System
Adewale O. Ogunde, Olusegun Folorunso, and Adesina S. Sodiya
Proceedings of The World Congress on Engineering 2015, pp172-177 [Online Full Text]
Adewale O. Ogunde, Olusegun Folorunso, and Adesina S. Sodiya, "The Design of an Adaptive Incremental Association Rule Mining System," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp172-177
Genetic Algorithm Based Design of Combinational Logic Circuits using Reed Muller blocks
Vijayakumari C K, Mythili P, and Rekha K James
Proceedings of The World Congress on Engineering 2015, pp178-183 [Online Full Text]
Vijayakumari C K, Mythili P, and Rekha K James, "Genetic Algorithm Based Design of Combinational Logic Circuits using Reed Muller blocks," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp178-183
An Agent Framework for Home Energy Management System
Visit Hirankitti
6/26/2019 Proceedings of WCE 2015, July 1 - 3, 2015, London, U.K., IAENG Open Access Publication
www.iaeng.org/publication/WCE2015/ 4/20
Proceedings of The World Congress on Engineering 2015, pp184-189 [Online Full Text]
Visit Hirankitti, "An Agent Framework for Home Energy Management System," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress onEngineering 2015, 1-3 July, 2015, London, U.K., pp184-189
Eye Tracking for Human-robot Symbiosis
Md. Al-Amin Bhuiyan
Proceedings of The World Congress on Engineering 2015, pp190-193 [Online Full Text]
Md. Al-Amin Bhuiyan, "Eye Tracking for Human-robot Symbiosis," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering2015, 1-3 July, 2015, London, U.K., pp190-193
Autonomous Navigation of a Lego Robot with Neural Networks
Salvador Ibarra M., Jose A. Castan R., Julio Laria M., Javier Guzman O., Mayra G. Tervino B., Julissa Perez C., and Emilio Castan R.
Proceedings of The World Congress on Engineering 2015, pp194-197 [Online Full Text]
Salvador Ibarra M., Jose A. Castan R., Julio Laria M., Javier Guzman O., Mayra G. Tervino B., Julissa Perez C., and Emilio Castan R., "Autonomous Navigation of a Lego Robotwith Neural Networks," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp194-197
An Enhanced Memory-Based Collaborative Filtering Approach for Context-Aware Recommendation
Guan-Yu Tseng, and Wei-Po Lee
Proceedings of The World Congress on Engineering 2015, pp198-202 [Online Full Text]
Guan-Yu Tseng, and Wei-Po Lee, "An Enhanced Memory-Based Collaborative Filtering Approach for Context-Aware Recommendation," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp198-202
Detection of Oil Production Abnormalities in a Cluster of Wells System Using Fuzzy Support Vector Machines
Odedele T. O, Hassan U. A, and Ibrahim H. D
Proceedings of The World Congress on Engineering 2015, pp203-208 [Online Full Text]
Odedele T. O, Hassan U. A, and Ibrahim H. D, "Detection of Oil Production Abnormalities in a Cluster of Wells System Using Fuzzy Support Vector Machines," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp203-208
The 2015 International Conference of Computer Science and Engineering
On Counting Planar Models
Stefan Porschen, and Tatjana Schmidt
Proceedings of The World Congress on Engineering 2015, pp209-214 [Online Full Text]
Stefan Porschen, and Tatjana Schmidt, "On Counting Planar Models," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering2015, 1-3 July, 2015, London, U.K., pp209-214
Controlling an Equilibrist Lego Robot
Vinicius Silva, Pedro Leite, Filomena Soares, Gil Lopes, Joao Sena Esteves, and Paulo Garrido
Proceedings of The World Congress on Engineering 2015, pp215-220 [Online Full Text]
Vinicius Silva, Pedro Leite, Filomena Soares, Gil Lopes, Joao Sena Esteves, and Paulo Garrido, "Controlling an Equilibrist Lego Robot," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp215-220
Design the Geographical Information System for Supplier Selection in Batik Industry
Aries Susanty, Sri Hartini, Diana Puspitasri, Wiwik Budiawan, and Priliandi Hidayatullah
Proceedings of The World Congress on Engineering 2015, pp221-226 [Online Full Text]
Aries Susanty, Sri Hartini, Diana Puspitasri, Wiwik Budiawan, and Priliandi Hidayatullah, "Design the Geographical Information System for Supplier Selection in Batik Industry,"Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp221-226
Aneesah: A Conversational Natural Language Interface to Databases
K. Shabaz, Jim D. O'Shea, Keeley A. Crockett, and A. Latham
Proceedings of The World Congress on Engineering 2015, pp227-232 [Online Full Text]
K. Shabaz, Jim D. O'Shea, Keeley A. Crockett, and A. Latham, "Aneesah: A Conversational Natural Language Interface to Databases," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp227-232
Issues in Computational System for Morphological Analysis of Standard Yoruba (SY) Verbs
Olufunke A. Oyinloye, and Odetunji A. Odejobi
Proceedings of The World Congress on Engineering 2015, pp233-238 [Online Full Text]
Olufunke A. Oyinloye, and Odetunji A. Odejobi, "Issues in Computational System for Morphological Analysis of Standard Yoruba (SY) Verbs," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp233-238
Structural Characteristic and Permeation of Gases through a Supported Silica Inorganic Ceramic Membrane
N. C Nwogu, M.N. Kajama, G. Osueke, and E. Gobina
Proceedings of The World Congress on Engineering 2015, pp245-248 [Online Full Text]
N. C Nwogu, M.N. Kajama, G. Osueke, and E. Gobina, "Structural Characteristic and Permeation of Gases through a Supported Silica Inorganic Ceramic Membrane," LectureNotes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp245-248
ICT and Effective School Management: Administrators' Perspective
Oluyemisi A. Oyedemi
Proceedings of The World Congress on Engineering 2015, pp249-252 [Online Full Text]
Oluyemisi A. Oyedemi, "ICT and Effective School Management: Administrators' Perspective," Lecture Notes in Engineering and Computer Science: Proceedings of The WorldCongress on Engineering 2015, 1-3 July, 2015, London, U.K., pp249-252
Modeling of Coupled Physio-Chemical Processes of a Liquid Droplet between Two Contacting Porous or Non-PorousMaterials
H. K. Navaz, A. L. Dang, and A. R. Zand
Proceedings of The World Congress on Engineering 2015, pp253-258 [Online Full Text]
H. K. Navaz, A. L. Dang, and A. R. Zand, "Modeling of Coupled Physio-Chemical Processes of a Liquid Droplet between Two Contacting Porous or Non-Porous Materials,"Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp253-258
An Efficient Approach to Generate Clear Topologies of Structures Using Gradient-based Search Methods
6/26/2019 Proceedings of WCE 2015, July 1 - 3, 2015, London, U.K., IAENG Open Access Publication
www.iaeng.org/publication/WCE2015/ 5/20
Ting-Yu Chen, and Yu-Siang Chang
Proceedings of The World Congress on Engineering 2015, pp259-264 [Online Full Text]
Ting-Yu Chen, and Yu-Siang Chang, "An Efficient Approach to Generate Clear Topologies of Structures Using Gradient-based Search Methods," Lecture Notes in Engineeringand Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp259-264
Integrating Internet of Things and EHealth Solutions for Students' Healthcare
Temitope O. Takpor, and Aderemi A. Atayero
Proceedings of The World Congress on Engineering 2015, pp265-268 [Online Full Text]
Temitope O. Takpor, and Aderemi A. Atayero, "Integrating Internet of Things and EHealth Solutions for Students' Healthcare," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp265-268
Mobile Sensing System for Georeferenced Performance Monitoring in Cycling
Diogo S. Oliveira, and Jose A. Afonso
Proceedings of The World Congress on Engineering 2015, pp269-273 [Online Full Text]
Diogo S. Oliveira, and Jose A. Afonso, "Mobile Sensing System for Georeferenced Performance Monitoring in Cycling," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp269-273
Optimization of Segment Size Assuring Application Perceived QoS in Healthcare
Vikram Jeet Singh, Megha Bhushan, Vikram Kumar, and Kishori Lal Bansal
Proceedings of The World Congress on Engineering 2015, pp274-278 [Online Full Text]
Vikram Jeet Singh, Megha Bhushan, Vikram Kumar, and Kishori Lal Bansal, "Optimization of Segment Size Assuring Application Perceived QoS in Healthcare," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp274-278
Analysis of Steel-Encased Composite Columns Subjected to Concentric Axial Load Using Artificial Neural Networks
Oscar Martinez-Ramos, David Hernandez-Figueirido, and Ana Piquer
Proceedings of The World Congress on Engineering 2015, pp279-284 [Online Full Text]
Oscar Martinez-Ramos, David Hernandez-Figueirido, and Ana Piquer, "Analysis of Steel-Encased Composite Columns Subjected to Concentric Axial Load Using Artificial NeuralNetworks," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp279-284
The 2015 International Conference of Data Mining and Knowledge Engineering
Geo-Spatial Analytics using the Dynamic ST-SNN Approach
Maribel Yasmina Santos, Joao Moura Pires, Guilherme Moreira, Ricardo Oliveira, Fernando Mendes, and Carlos Costa
Proceedings of The World Congress on Engineering 2015, pp285-290 [Online Full Text]
Maribel Yasmina Santos, Joao Moura Pires, Guilherme Moreira, Ricardo Oliveira, Fernando Mendes, and Carlos Costa, "Geo-Spatial Analytics using the Dynamic ST-SNNApproach," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp285-290
A Machine Learning Predictive Model for the Jamaica Frontier Market
S. A. Bogle, and W. D. Potter
Proceedings of The World Congress on Engineering 2015, pp291-296 [Online Full Text]
S. A. Bogle, and W. D. Potter, "A Machine Learning Predictive Model for the Jamaica Frontier Market," Lecture Notes in Engineering and Computer Science: Proceedings of TheWorld Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp291-296
A Hybrid Algorithm for Identifying and Categorizing Plagiarised Text Documents
Victor U. Thompson, and Christo Panchev
Proceedings of The World Congress on Engineering 2015, pp297-302 [Online Full Text]
Victor U. Thompson, and Christo Panchev, "A Hybrid Algorithm for Identifying and Categorizing Plagiarised Text Documents," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp297-302
The Dynamics of the Global Market: A Knowledge Acquisition and Application Approach
Nelson Sizwe Madonsela, Paulin Mbecke, and Charles Mbohwa
Proceedings of The World Congress on Engineering 2015, pp303-307 [Online Full Text]
Nelson Sizwe Madonsela, Paulin Mbecke, and Charles Mbohwa, "The Dynamics of the Global Market: A Knowledge Acquisition and Application Approach," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp303-307
Data Warehouse Design Considerations for a Healthcare Business Intelligence System
Joseph George, B. Vijay Kumar, and V. Santhosh Kumar
Proceedings of The World Congress on Engineering 2015, pp308-311 [Online Full Text]
Joseph George, B. Vijay Kumar, and V. Santhosh Kumar, "Data Warehouse Design Considerations for a Healthcare Business Intelligence System," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp308-311
Improving Cities Sustainability through the Use of Data Mining in a Context of Big City Data
Carlos Costa, and Maribel Yasmina Santos
Proceedings of The World Congress on Engineering 2015, pp320-325 [Online Full Text]
Carlos Costa, and Maribel Yasmina Santos, "Improving Cities Sustainability through the Use of Data Mining in a Context of Big City Data," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp320-325
To Design and Implement a Reliable Sugar Evaporation Control System that will Work in an Energy Saving Way
Tawanda Mushiri, and Charles Mbohwa
Proceedings of The World Congress on Engineering 2015, pp326-331 [Online Full Text]
Tawanda Mushiri, and Charles Mbohwa, "To Design and Implement a Reliable Sugar Evaporation Control System that will Work in an Energy Saving Way," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp326-331
The Impact of Feature Vector Length on Activity Recognition Accuracy on Mobile Phone
Sulaimon A. Bashir, Daniel C. Doolan, and Andrei Petrovski
Proceedings of The World Congress on Engineering 2015, pp332-337 [Online Full Text]
Sulaimon A. Bashir, Daniel C. Doolan, and Andrei Petrovski, "The Impact of Feature Vector Length on Activity Recognition Accuracy on Mobile Phone," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp332-337
6/26/2019 Proceedings of WCE 2015, July 1 - 3, 2015, London, U.K., IAENG Open Access Publication
www.iaeng.org/publication/WCE2015/ 6/20
The 2015 International Conference of Electrical and Electronics Engineering
Wireless Monitoring and Management of Energy Consumption and Power Quality Events
Jose A. Afonso, Filipe Rodrigues, Pedro Pereira, Henrique Goncalves, and Joao L. Afonso
Proceedings of The World Congress on Engineering 2015, pp338-343 [Online Full Text]
Jose A. Afonso, Filipe Rodrigues, Pedro Pereira, Henrique Goncalves, and Joao L. Afonso, "Wireless Monitoring and Management of Energy Consumption and Power QualityEvents," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp338-343
Effects of Saccharin Addition on Surface Morphology and Microstructure of Electrodeposited Cu-In Alloy
Hsiang Chen, Yih-Min Yeh, and Ching-Pang Chen
Proceedings of The World Congress on Engineering 2015, pp344-348 [Online Full Text]
Hsiang Chen, Yih-Min Yeh, and Ching-Pang Chen, "Effects of Saccharin Addition on Surface Morphology and Microstructure of Electrodeposited Cu-In Alloy," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp344-348
Modeling and Simulation of High Speed PLL Based Frequency Synthesizer Used in RFID
Ahmed Telba, and Khalid Jamil
Proceedings of The World Congress on Engineering 2015, pp349-353 [Online Full Text]
Ahmed Telba, and Khalid Jamil, "Modeling and Simulation of High Speed PLL Based Frequency Synthesizer Used in RFID," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp349-353
Control of a New Swimming Microrobot Design Using Flatness-ANFIS-Based Approach
M. Meguellati, F. Srairi, F. Djeffal, and L. Saidi
Proceedings of The World Congress on Engineering 2015, pp354-358 [Online Full Text]
M. Meguellati, F. Srairi, F. Djeffal, and L. Saidi, "Control of a New Swimming Microrobot Design Using Flatness-ANFIS-Based Approach," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp354-358
Design of Low Jitter PLL for Serializer/Deserializer Transmitter
Sireesha Dhulipati, and Lili He
Proceedings of The World Congress on Engineering 2015, pp359-362 [Online Full Text]
Sireesha Dhulipati, and Lili He, "Design of Low Jitter PLL for Serializer/Deserializer Transmitter," Lecture Notes in Engineering and Computer Science: Proceedings of The WorldCongress on Engineering 2015, 1-3 July, 2015, London, U.K., pp359-362
Research on the Use of Matlab in the Modeling of 3-phase Power Systems
Tawanda Mushiri, and Charles Mbohwa
Proceedings of The World Congress on Engineering 2015, pp363-369 [Online Full Text]
Tawanda Mushiri, and Charles Mbohwa, "Research on the Use of Matlab in the Modeling of 3-phase Power Systems," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp363-369
Detecting the Position and Number of Sharks in the Sea Using Active Sound Navigation and Ranging (SONAR) Technique
Hauwa T. Abdulkarim
Proceedings of The World Congress on Engineering 2015, pp370-374 [Online Full Text]
Hauwa T. Abdulkarim, "Detecting the Position and Number of Sharks in the Sea Using Active Sound Navigation and Ranging (SONAR) Technique," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp370-374
Sensor Less Speed Control of PMSM using SVPWM Technique Based on MRAS Method for Various Speed and LoadVariations
Pradeep Kumar, Mandeep Kumar, and Surender Dahiya
Proceedings of The World Congress on Engineering 2015, pp375-380 [Online Full Text]
Pradeep Kumar, Mandeep Kumar, and Surender Dahiya, "Sensor Less Speed Control of PMSM using SVPWM Technique Based on MRAS Method for Various Speed and LoadVariations," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp375-380
Automatic Control of Cycling Effort Using Electric Bicycles and Mobile Devices
Jose A. Afonso, Filipe J. Rodrigues, Delfim Pedrosa, and Joao L. Afonso
Proceedings of The World Congress on Engineering 2015, pp381-386 [Online Full Text]
Jose A. Afonso, Filipe J. Rodrigues, Delfim Pedrosa, and Joao L. Afonso, "Automatic Control of Cycling Effort Using Electric Bicycles and Mobile Devices," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp381-386
Performance Evaluation of The Quality of VoIP Over WLAN Codecs
H.A. Ifijeh, F.E. Idachaba, and I.B. Oluwafemi
Proceedings of The World Congress on Engineering 2015, pp387-392 [Online Full Text]
H.A. Ifijeh, F.E. Idachaba, and I.B. Oluwafemi, "Performance Evaluation of The Quality of VoIP Over WLAN Codecs," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp387-392
Optical, Material, and Electrical Characterizations of High-K Tantalum Pentoxide (Ta2O5) Dielectric Deposited on thePolycrystalline Silicon
Chyuan-Haur Kao, Hsiang Chen, and Ching-Pang Chen
Proceedings of The World Congress on Engineering 2015, pp393-395 [Online Full Text]
Chyuan-Haur Kao, Hsiang Chen, and Ching-Pang Chen, "Optical, Material, and Electrical Characterizations of High-K Tantalum Pentoxide (Ta2O5) Dielectric Deposited on thePolycrystalline Silicon," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp393-395
Numerical Modeling of a Deep Submicron Gas Sensor Based on Double-Gate Graphene Nanoribbon Field-EffectTransistor
K. Tamersit, F. Djeffal, and M. Meguellati
Proceedings of The World Congress on Engineering 2015, pp396-399 [Online Full Text]
K. Tamersit, F. Djeffal, and M. Meguellati, "Numerical Modeling of a Deep Submicron Gas Sensor Based on Double-Gate Graphene Nanoribbon Field-Effect Transistor," LectureNotes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp396-399
Performance of Hybrid Optical Amplifier and Conventional Optical Amplifier in the Scenario of Long Haul Ultra-DenseWavelength Division Multiplexed System
Yugnanda Malhotra, R.S. Kaler, and Enakshi Khular Sharma
Proceedings of The World Congress on Engineering 2015, pp400-402 [Online Full Text]
Yugnanda Malhotra, R.S. Kaler, and Enakshi Khular Sharma, "Performance of Hybrid Optical Amplifier and Conventional Optical Amplifier in the Scenario of Long Haul Ultra-Dense Wavelength Division Multiplexed System," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July,
6/26/2019 Proceedings of WCE 2015, July 1 - 3, 2015, London, U.K., IAENG Open Access Publication
www.iaeng.org/publication/WCE2015/ 7/20
2015, London, U.K., pp400-402
Prefilter Bandwidth Effects in Asynchronous Sequential Symbol Synchronizers based on Pulse Comparison by BothTransitions at Quarter Bit Rate
Antonio D. Reis, Jose F. Rocha, Atilio S. Gameiro, and Jose P. Carvalho
Proceedings of The World Congress on Engineering 2015, pp403-406 [Online Full Text]
Antonio D. Reis, Jose F. Rocha, Atilio S. Gameiro, and Jose P. Carvalho, "Prefilter Bandwidth Effects in Asynchronous Sequential Symbol Synchronizers based on PulseComparison by Both Transitions at Quarter Bit Rate," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July,2015, London, U.K., pp403-406
In-Phase Hexagonal Implant-Defined Coherently Coupled Vertical Cavity Surface Emitting Laser Array
Meng Xun, Chen Xu, Kun Xu, Jun Wang, and Guoqing Jiang
Proceedings of The World Congress on Engineering 2015, pp407-409 [Online Full Text]
Meng Xun, Chen Xu, Kun Xu, Jun Wang, and Guoqing Jiang, "In-Phase Hexagonal Implant-Defined Coherently Coupled Vertical Cavity Surface Emitting Laser Array," LectureNotes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp407-409
Estimation of Temperature Rise in MVA Range Dry-Type Transformers and Practical Verification Based on SimulatedLoading
Farhad Nabhani, Simon Hodgson, and Kapila Warnakulasuriya
Proceedings of The World Congress on Engineering 2015, pp410-415 [Online Full Text]
Farhad Nabhani, Simon Hodgson, and Kapila Warnakulasuriya, "Estimation of Temperature Rise in MVA Range Dry-Type Transformers and Practical Verification Based onSimulated Loading," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp410-415
Asynchronous Sequential Symbol Synchronizers based on Pulse Comparison by Both Transitions at Quarter Bit Rate
Antonio D. Reis, Jose F. Rocha, Atilio S. Gameiro, and Jose P. Carvalho
Proceedings of The World Congress on Engineering 2015, pp416-420 [Online Full Text]
Antonio D. Reis, Jose F. Rocha, Atilio S. Gameiro, and Jose P. Carvalho, "Asynchronous Sequential Symbol Synchronizers based on Pulse Comparison by Both Transitions atQuarter Bit Rate," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp416-420
Determination of the Stress and Resistivity of Stainless Steel Foams
Ahmed Telba, and Mohamed Shehata Aly
Proceedings of The World Congress on Engineering 2015, pp421-425 [Online Full Text]
Ahmed Telba, and Mohamed Shehata Aly, "Determination of the Stress and Resistivity of Stainless Steel Foams," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp421-425
Analytical Investigation of Swing Factor for Nanoscale Double Gate MOSFET Including Gate-work-function Effect
T. Bentrcia, F. Djeffal, and M. Meguellati
Proceedings of The World Congress on Engineering 2015, pp426-429 [Online Full Text]
T. Bentrcia, F. Djeffal, and M. Meguellati, "Analytical Investigation of Swing Factor for Nanoscale Double Gate MOSFET Including Gate-work-function Effect," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp426-429
Low Power VTOL UAV Deployments for Urban Area Monitoring
F.E Idachaba, and O.O Oni
Proceedings of The World Congress on Engineering 2015, pp430-433 [Online Full Text]
F.E Idachaba, and O.O Oni, "Low Power VTOL UAV Deployments for Urban Area Monitoring," Lecture Notes in Engineering and Computer Science: Proceedings of The WorldCongress on Engineering 2015, 1-3 July, 2015, London, U.K., pp430-433
A Realization of the Inverted Pendulum and Cart
Julio Goncalves, Nuno Gago, Carlos Arantes, Filomena Soares, Gil Lopes, Joao Sena Esteves, and Paulo Garrido
Proceedings of The World Congress on Engineering 2015, pp434-439 [Online Full Text]
Julio Goncalves, Nuno Gago, Carlos Arantes, Filomena Soares, Gil Lopes, Joao Sena Esteves, and Paulo Garrido, "A Realization of the Inverted Pendulum and Cart," LectureNotes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp434-439
Key Power Measurements and their Automation in Post Silicon Validation
Deepa Narasimhan, and Sravya Ajay Velala
Proceedings of The World Congress on Engineering 2015, pp440-443 [Online Full Text]
Deepa Narasimhan, and Sravya Ajay Velala, "Key Power Measurements and their Automation in Post Silicon Validation," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp440-443
Analysis of IEEE Harmonic Limits under Resonance Conditions
George Eduful, and Ebenezer A. Jackson
Proceedings of The World Congress on Engineering 2015, pp444-450 [Online Full Text]
George Eduful, and Ebenezer A. Jackson, "Analysis of IEEE Harmonic Limits under Resonance Conditions," Lecture Notes in Engineering and Computer Science: Proceedingsof The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp444-450
Parabolic Concentrator Controlled by Fuzzy Logic
Ozuna Gustavo, Wozniak Marek, Gomez Leonel, and Lugo Coporo Marcos
Proceedings of The World Congress on Engineering 2015, pp451-454 [Online Full Text]
Ozuna Gustavo, Wozniak Marek, Gomez Leonel, and Lugo Coporo Marcos, "Parabolic Concentrator Controlled by Fuzzy Logic," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp451-454
DIBL and Subthreshold Swing Effect on Carbon Nanotube Field Effect Transistor
Soheli Farhana, AHM Zahirul Alam, and Sheroz Khan
Proceedings of The World Congress on Engineering 2015, pp455-458 [Online Full Text]
Soheli Farhana, AHM Zahirul Alam, and Sheroz Khan, "DIBL and Subthreshold Swing Effect on Carbon Nanotube Field Effect Transistor," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp455-458
Open Library of IP Module Interfaces for AMBA Bus
Laurentiu Acasandrei, and Angel Barriga
Proceedings of The World Congress on Engineering 2015, pp459-464 [Online Full Text]
Laurentiu Acasandrei, and Angel Barriga, "Open Library of IP Module Interfaces for AMBA Bus," Lecture Notes in Engineering and Computer Science: Proceedings of TheWorld Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp459-464
6/26/2019 Proceedings of WCE 2015, July 1 - 3, 2015, London, U.K., IAENG Open Access Publication
www.iaeng.org/publication/WCE2015/ 8/20
Developing a Method with an Experimental Study for Estimating Vehicle Speed and Slip using Kalman Filter and FuzzyRules
Ali Momeni, Seyed Reza Moasheri, Hossein Chabok, and Arman Kheradmand
Proceedings of The World Congress on Engineering 2015, pp465-470 [Online Full Text]
Ali Momeni, Seyed Reza Moasheri, Hossein Chabok, and Arman Kheradmand, "Developing a Method with an Experimental Study for Estimating Vehicle Speed and Slip usingKalman Filter and Fuzzy Rules," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K.,pp465-470
The 2015 International Conference of Information Engineering
Ontology-Based Requirement Conflicts Analysis in Class Diagrams
Chi-Lun Liu, and Hsieh-Hong Huang
Proceedings of The World Congress on Engineering 2015, pp471-476 [Online Full Text]
Chi-Lun Liu, and Hsieh-Hong Huang, "Ontology-Based Requirement Conflicts Analysis in Class Diagrams," Lecture Notes in Engineering and Computer Science: Proceedingsof The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp471-476
A Comparative Review of Improvements in Long Term Evolution
O.O Oni, F.E Idachaba, O.I Oshin, and N.S Nkordeh
Proceedings of The World Congress on Engineering 2015, pp477-481 [Online Full Text]
O.O Oni, F.E Idachaba, O.I Oshin, and N.S Nkordeh, "A Comparative Review of Improvements in Long Term Evolution," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp477-481
Czech Text Steganography Method by Selective Hiding Technique
Sungkrityayan Khan, Rishi Sankineni, Padmavathi Balagurunathan, Nujerlla Suresh Divya Shree, and Abinaya Balasubramanian
Proceedings of The World Congress on Engineering 2015, pp482-485 [Online Full Text]
Sungkrityayan Khan, Rishi Sankineni, Padmavathi Balagurunathan, Nujerlla Suresh Divya Shree, and Abinaya Balasubramanian, "Czech Text Steganography Method bySelective Hiding Technique," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K.,pp482-485
Webportal Applications: Automated Student Clearance Portal
Idachaba F.E, Mbeh K.E, Oshin O. I., and Oni O. O
Proceedings of The World Congress on Engineering 2015, pp486-488 [Online Full Text]
Idachaba F.E, Mbeh K.E, Oshin O. I., and Oni O. O, "Webportal Applications: Automated Student Clearance Portal," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp486-488
GSM - LTE Migration: Deployment Issues for Operators in Developing Countries
O.O Oni, F.E Idachaba, and N.S Nkordeh
Proceedings of The World Congress on Engineering 2015, pp489-492 [Online Full Text]
O.O Oni, F.E Idachaba, and N.S Nkordeh, "GSM - LTE Migration: Deployment Issues for Operators in Developing Countries," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp489-492
Feature and Sentiment based Linked Instance RDF Data towards Ontology based Review Categorization
D. Teja Santosh, and B. Vishnu Vardhan
Proceedings of The World Congress on Engineering 2015, pp493-497 [Online Full Text]
D. Teja Santosh, and B. Vishnu Vardhan, "Feature and Sentiment based Linked Instance RDF Data towards Ontology based Review Categorization," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp493-497
Web-based Portal for Vehicle Licensing Management
Olutola Oni, Oluwadamilola Oshin, Oluyinka Oni, and Francis Idachaba
Proceedings of The World Congress on Engineering 2015, pp498-501 [Online Full Text]
Olutola Oni, Oluwadamilola Oshin, Oluyinka Oni, and Francis Idachaba, "Web-based Portal for Vehicle Licensing Management," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp498-501
The 2015 International Conference of Information Security and Internet Engineering
Wide Area Network Acceleration in a High Assurance Enterprise
Kevin Foltz, and William R Simpson
Proceedings of The World Congress on Engineering 2015, pp502-507 [Online Full Text]
Kevin Foltz, and William R Simpson, "Wide Area Network Acceleration in a High Assurance Enterprise," Lecture Notes in Engineering and Computer Science: Proceedings ofThe World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp502-507
New Homomorphic Platform for Authentication and Downloading Data in MCC
Karim ZKIK, Maha TEBAA, and Said EL HAJJI
Proceedings of The World Congress on Engineering 2015, pp508-514 [Online Full Text]
Karim ZKIK, Maha TEBAA, and Said EL HAJJI, "New Homomorphic Platform for Authentication and Downloading Data in MCC," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp508-514
Security Issues in Wireless Sensor Networks: Attacks and Countermeasures
Kahina CHELLI
Proceedings of The World Congress on Engineering 2015, pp519-524 [Online Full Text]
Kahina CHELLI, "Security Issues in Wireless Sensor Networks: Attacks and Countermeasures," Lecture Notes in Engineering and Computer Science: Proceedings of The WorldCongress on Engineering 2015, 1-3 July, 2015, London, U.K., pp519-524
Scalable Truly Random Number Generator
Wang Liao, Meilin Wan, Kui Dai, and Xuecheng Zou
Proceedings of The World Congress on Engineering 2015, pp525-528 [Online Full Text]
Wang Liao, Meilin Wan, Kui Dai, and Xuecheng Zou, "Scalable Truly Random Number Generator," Lecture Notes in Engineering and Computer Science: Proceedings of TheWorld Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp525-528
6/26/2019 Proceedings of WCE 2015, July 1 - 3, 2015, London, U.K., IAENG Open Access Publication
www.iaeng.org/publication/WCE2015/ 9/20
The 2015 International Conference of Parallel and Distributed Computing
Solving Discontinuous Collocation Equations for a Class of Brain Tumor Models on GPUs
I.E. Athanasakis, N.D. Vilanakis, and E.N. Mathioudakis
Proceedings of The World Congress on Engineering 2015, pp529-534 [Online Full Text]
I.E. Athanasakis, N.D. Vilanakis, and E.N. Mathioudakis, "Solving Discontinuous Collocation Equations for a Class of Brain Tumor Models on GPUs," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp529-534
Detect and Filter Traffic Attack through Cloud Trace back and Neural Network
Mansaf Alam, Kashish Ara Shakil, Mohd. Salman Javed, Manzoor Ansari, and Ambreen
Proceedings of The World Congress on Engineering 2015, pp535-540 [Online Full Text]
Mansaf Alam, Kashish Ara Shakil, Mohd. Salman Javed, Manzoor Ansari, and Ambreen, "Detect and Filter Traffic Attack through Cloud Trace back and Neural Network,"Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp535-540
IRaaS: A Cloud Implementation of an Interface Relaxation Method for the Solution of PDEs
Aigli Korfiati, Niki Sfika, Konstantis Daloukas, Christos Alexakos, Panagiota Tsompanopoulou, and Spiros Likothanassis
Proceedings of The World Congress on Engineering 2015, pp541-546 [Online Full Text]
Aigli Korfiati, Niki Sfika, Konstantis Daloukas, Christos Alexakos, Panagiota Tsompanopoulou, and Spiros Likothanassis, "IRaaS: A Cloud Implementation of an InterfaceRelaxation Method for the Solution of PDEs," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015,London, U.K., pp541-546
The 2015 International Conference of Signal and Image Engineering
A Model for the Evolution of Router Bandwidth Demand Using an Adaptive PID Controller
Iordanis K. Giannopoulos, Apostolos P. Leros, and Asimakis K. Leros
Proceedings of The World Congress on Engineering 2015, pp547-551 [Online Full Text]
Iordanis K. Giannopoulos, Apostolos P. Leros, and Asimakis K. Leros, "A Model for the Evolution of Router Bandwidth Demand Using an Adaptive PID Controller," Lecture Notesin Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp547-551
Performance Evaluation of JPEG XT Standard for High Dynamic Range Image Coding
Seungcheol Choi, Oh-Jin Kwon, Dukhyun Jang, and Seokrim Choi
Proceedings of The World Congress on Engineering 2015, pp552-556 [Online Full Text]
Seungcheol Choi, Oh-Jin Kwon, Dukhyun Jang, and Seokrim Choi, "Performance Evaluation of JPEG XT Standard for High Dynamic Range Image Coding," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp552-556
Why Weibull Distribution Can Be Used To Describe Belt Segment and Belt Loop Operating Time and Why It Is NotEnough To Use It To Predict Remaining Belt Life?
Blazej R., Jurdziak L., and Kawalec W.
Proceedings of The World Congress on Engineering 2015, pp557-561 [Online Full Text]
Blazej R., Jurdziak L., and Kawalec W., "Why Weibull Distribution Can Be Used To Describe Belt Segment and Belt Loop Operating Time and Why It Is Not Enough To Use It ToPredict Remaining Belt Life?," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K.,pp557-561
Optical Flow Estimation Using Local Features
Abdulmalik Danlami Mohammed, and Tim Morris
Proceedings of The World Congress on Engineering 2015, pp562-565 [Online Full Text]
Abdulmalik Danlami Mohammed, and Tim Morris, "Optical Flow Estimation Using Local Features," Lecture Notes in Engineering and Computer Science: Proceedings of TheWorld Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp562-565
Enhanced Security and Reinstatement Computing of Images Using Fragile Invisible Integer Wavelet WatermarkingScheme
J. Zafar, and M. Asad
Proceedings of The World Congress on Engineering 2015, pp566-570 [Online Full Text]
J. Zafar, and M. Asad, "Enhanced Security and Reinstatement Computing of Images Using Fragile Invisible Integer Wavelet Watermarking Scheme," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp566-570
The 2015 International Conference of Systems Biology and Bioengineering
Analysis of an SEIR Epidemic Model with a General Feedback Vaccination Law
M. De la Sen, S. Alonso-Quesada, A. Ibeas, and R. Nistal
Proceedings of The World Congress on Engineering 2015, pp571-576 [Online Full Text]
M. De la Sen, S. Alonso-Quesada, A. Ibeas, and R. Nistal, "Analysis of an SEIR Epidemic Model with a General Feedback Vaccination Law," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp571-576
Identification of Candidate Genes Related to Renal Carcinoma using Protein Interactions and Structures
Lei Chen, Yuhang Zhang, Jian Zhang, Tao Huang, Yang Shu, and Yu-Dong Cai
Proceedings of The World Congress on Engineering 2015, pp577-581 [Online Full Text]
Lei Chen, Yuhang Zhang, Jian Zhang, Tao Huang, Yang Shu, and Yu-Dong Cai, "Identification of Candidate Genes Related to Renal Carcinoma using Protein Interactions andStructures," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp577-581
An Investigation on Stiffness of the Temporomandibular Joint Under Cyclical Loading
Janith Muhandiram, Julia Pierson, Bin Wang, and Mahmoud Chizari
Proceedings of The World Congress on Engineering 2015, pp582-585 [Online Full Text]
Janith Muhandiram, Julia Pierson, Bin Wang, and Mahmoud Chizari, "An Investigation on Stiffness of the Temporomandibular Joint Under Cyclical Loading," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp582-585
Off-target Possibility Prediction of Efficient siRNA: A Workflow
6/26/2019 Proceedings of WCE 2015, July 1 - 3, 2015, London, U.K., IAENG Open Access Publication
www.iaeng.org/publication/WCE2015/ 10/20
Reena Murali, and David Peter S
Proceedings of The World Congress on Engineering 2015, pp586-591 [Online Full Text]
Reena Murali, and David Peter S, "Off-target Possibility Prediction of Efficient siRNA: A Workflow," Lecture Notes in Engineering and Computer Science: Proceedings of TheWorld Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp586-591
Methane Production from Anaerobic Co-digestion of Cow Dung, Chicken Manure, Pig Manure and Sewage Waste
M. R. Sebola, H. B. Tesfagiorgis, and E. Muzenda
Proceedings of The World Congress on Engineering 2015, pp592-598 [Online Full Text]
M. R. Sebola, H. B. Tesfagiorgis, and E. Muzenda, "Methane Production from Anaerobic Co-digestion of Cow Dung, Chicken Manure, Pig Manure and Sewage Waste," LectureNotes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp592-598
The 2015 International Conference of Wireless Networks
Multi Fingerprint Map for Indoor Localisation
Pedro Mestre, Joao Cordeiro, and Carlos Serodio
Proceedings of The World Congress on Engineering 2015, pp599-604 [Online Full Text]
Pedro Mestre, Joao Cordeiro, and Carlos Serodio, "Multi Fingerprint Map for Indoor Localisation," Lecture Notes in Engineering and Computer Science: Proceedings of TheWorld Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp599-604
On Space-Frequency Water-Filling Precoding for Multi-User MIMO Communications
Yu-Kuan Chang, Ye-Shun Shen, Fang-Biau Ueng, and Shao-Hua Tsai
Proceedings of The World Congress on Engineering 2015, pp605-610 [Online Full Text]
Yu-Kuan Chang, Ye-Shun Shen, Fang-Biau Ueng, and Shao-Hua Tsai, "On Space-Frequency Water-Filling Precoding for Multi-User MIMO Communications," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp605-610
Performance Evaluation of IEEE 802.11 a, g Laboratory Open Point-to-Multipoint Links
J. A. R. Pacheco de Carvalho, H. Veiga, C. F. Ribeiro Pacheco, and A. D. Reis
Proceedings of The World Congress on Engineering 2015, pp611-615 [Online Full Text]
J. A. R. Pacheco de Carvalho, H. Veiga, C. F. Ribeiro Pacheco, and A. D. Reis, "Performance Evaluation of IEEE 802.11 a, g Laboratory Open Point-to-Multipoint Links," LectureNotes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp611-615
3GPP LTE: An Overview
Oluwadamilola I. Oshin, and Aderemi A. Atayero
Proceedings of The World Congress on Engineering 2015, pp616-621 [Online Full Text]
Oluwadamilola I. Oshin, and Aderemi A. Atayero, "3GPP LTE: An Overview," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress onEngineering 2015, 1-3 July, 2015, London, U.K., pp616-621
Laboratory Performance Measurements of IEEE 802.11 b, g Open Four-node PTMP Links
J. A. R. Pacheco de Carvalho, C. F. Ribeiro Pacheco, A. D. Reis, and H. Veiga
Proceedings of The World Congress on Engineering 2015, pp622-626 [Online Full Text]
J. A. R. Pacheco de Carvalho, C. F. Ribeiro Pacheco, A. D. Reis, and H. Veiga, "Laboratory Performance Measurements of IEEE 802.11 b, g Open Four-node PTMP Links,"Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp622-626
Novel Low-Complexity and Power-Efficient Techniques for Fast Collision Detection in Wireless Sensor Networks
Fawaz Alassery, Walid K. M. Ahmed, Mohsen Sarraf, and Victor Lawrence
Proceedings of The World Congress on Engineering 2015, pp627-633 [Online Full Text]
Fawaz Alassery, Walid K. M. Ahmed, Mohsen Sarraf, and Victor Lawrence, "Novel Low-Complexity and Power-Efficient Techniques for Fast Collision Detection in WirelessSensor Networks," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp627-633
Development of A GSM - Based Fire Detector System
Oke A.O, Falohun A.S, and Adetunji A.B
Proceedings of The World Congress on Engineering 2015, pp634-637 [Online Full Text]
Oke A.O, Falohun A.S, and Adetunji A.B, "Development of A GSM - Based Fire Detector System," Lecture Notes in Engineering and Computer Science: Proceedings of TheWorld Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp634-637
3GPP LTE: The Relevance of Interworking
Oluwadamilola I. Oshin, Charles U. Ndujiuba, and Francis E. Idachaba
Proceedings of The World Congress on Engineering 2015, pp638-640 [Online Full Text]
Oluwadamilola I. Oshin, Charles U. Ndujiuba, and Francis E. Idachaba, "3GPP LTE: The Relevance of Interworking," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp638-640
Fuzzy Inference with Parameter Identification for Indoor WLAN Positioning
M. Alakhras, M. Oussalah, and M.I. Hussein
Proceedings of The World Congress on Engineering 2015, pp641-648 [Online Full Text]
M. Alakhras, M. Oussalah, and M.I. Hussein, "Fuzzy Inference with Parameter Identification for Indoor WLAN Positioning," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp641-648
Mobile Networks Beyond 4G
Hilary Frank, and Peter Ball
Proceedings of The World Congress on Engineering 2015, pp649-652 [Online Full Text]
Hilary Frank, and Peter Ball, "Mobile Networks Beyond 4G," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp649-652
Wireless Cycling Posture Monitoring Based on Smartphones and Bluetooth Low Energy
Antonio F. Maio, and Jose A. Afonso
Proceedings of The World Congress on Engineering 2015, pp653-657 [Online Full Text]
Antonio F. Maio, and Jose A. Afonso, "Wireless Cycling Posture Monitoring Based on Smartphones and Bluetooth Low Energy," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp653-657
Microstrip Patch Antenna: Comparing Performance of a Rectangular and a Circular Patch at LTE Bluetooth and GSMFrequencies
6/26/2019 Proceedings of WCE 2015, July 1 - 3, 2015, London, U.K., IAENG Open Access Publication
www.iaeng.org/publication/WCE2015/ 11/20
Nsikan Nkordeh, Francis Idachaba, and Oluyinka Oni
Proceedings of The World Congress on Engineering 2015, pp658-663 [Online Full Text]
Nsikan Nkordeh, Francis Idachaba, and Oluyinka Oni, "Microstrip Patch Antenna: Comparing Performance of a Rectangular and a Circular Patch at LTE Bluetooth and GSMFrequencies," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp658-663
Low-Complexity Turbo Receiver for MIMO SC-FDMA Communication Systems
Fang-Biau Ueng, Yu-Kuan Chang, and Ying-Mu Yang
Proceedings of The World Congress on Engineering 2015, pp664-669 [Online Full Text]
Fang-Biau Ueng, Yu-Kuan Chang, and Ying-Mu Yang, "Low-Complexity Turbo Receiver for MIMO SC-FDMA Communication Systems," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp664-669
The 2015 International Conference of Computational Statistics and Data Engineering
An Example of Peak Finding in Univariate Data by Least Squares Approximation and Restrictions on the Signs of theFirst Differences
I. C. Demetriou
Proceedings of The World Congress on Engineering 2015, pp670-675 [Online Full Text]
I. C. Demetriou, "An Example of Peak Finding in Univariate Data by Least Squares Approximation and Restrictions on the Signs of the First Differences," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp670-675
A General Attribute Diffusion Mechanism on Social Networks
Peter Chang-Yi Weng, Frederick Kin Hing Phoa, and Yen-Sheng Chiang
Proceedings of The World Congress on Engineering 2015, pp676-679 [Online Full Text]
Peter Chang-Yi Weng, Frederick Kin Hing Phoa, and Yen-Sheng Chiang, "A General Attribute Diffusion Mechanism on Social Networks," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp676-679
Observation Consisting of Parameter and Error: Determination of Parameter
Dhritikesh Chakrabarty
Proceedings of The World Congress on Engineering 2015, pp680-684 [Online Full Text]
Dhritikesh Chakrabarty, "Observation Consisting of Parameter and Error: Determination of Parameter," Lecture Notes in Engineering and Computer Science: Proceedings of TheWorld Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp680-684
The 2015 International Conference of Financial Engineering
Portfolio Selection Problem Considering Behavioral Stocks
Kuo-Hwa Chang, Michael N. Young, Matthew I. Hildawa, Ian Joshua R. Santos, and Chien-Hung Pan
Proceedings of The World Congress on Engineering 2015, pp685-690 [Online Full Text]
Kuo-Hwa Chang, Michael N. Young, Matthew I. Hildawa, Ian Joshua R. Santos, and Chien-Hung Pan, "Portfolio Selection Problem Considering Behavioral Stocks," LectureNotes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp685-690
A Posteriori Error Estimator for a Front-Fixing Finite Difference Scheme for American Options
Riccardo Fazio
Proceedings of The World Congress on Engineering 2015, pp691-696 [Online Full Text]
Riccardo Fazio, "A Posteriori Error Estimator for a Front-Fixing Finite Difference Scheme for American Options," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp691-696
Subdiffusive Ornstein-Uhlenbeck Processes and Applications to Finance
Omer Onalan
Proceedings of The World Congress on Engineering 2015, pp697-703 [Online Full Text]
Omer Onalan, "Subdiffusive Ornstein-Uhlenbeck Processes and Applications to Finance," Lecture Notes in Engineering and Computer Science: Proceedings of The WorldCongress on Engineering 2015, 1-3 July, 2015, London, U.K., pp697-703
Stochastic Models for Assets Allocation under the Framework of Prospect and Cumulative Prospect Theory
S. P. Sidorov, A. Homchenko, and V. Barabash
Proceedings of The World Congress on Engineering 2015, pp704-709 [Online Full Text]
S. P. Sidorov, A. Homchenko, and V. Barabash, "Stochastic Models for Assets Allocation under the Framework of Prospect and Cumulative Prospect Theory," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp704-709
The 2015 International Conference of Manufacturing Engineering and Engineering Management
Mechanical Design of Viscoelastic Parts Fabricated Using Additive Manufacturing Technologies
Alexander V. Manzhirov
Proceedings of The World Congress on Engineering 2015, pp710-714 [Online Full Text]
Alexander V. Manzhirov, "Mechanical Design of Viscoelastic Parts Fabricated Using Additive Manufacturing Technologies," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp710-714
Influence of Scanning Speed and Energy Density on the Evolving Properties of Laser Deposited Ti6Al4V/Cu Composites
Mutiu F Erinosho, Esther T Akinlabi, and Sisa Pityana
Proceedings of The World Congress on Engineering 2015, pp715-719 [Online Full Text]
Mutiu F Erinosho, Esther T Akinlabi, and Sisa Pityana, "Influence of Scanning Speed and Energy Density on the Evolving Properties of Laser Deposited Ti6Al4V/CuComposites," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp715-719
Relationships between Main Accidental Variables at Ethanol Fuel Industry
Romina D. Calvo Olivares, Selva S. Rivera, Pedro A. Baziuk, and Jorge E. Nunez Mc Leod
Proceedings of The World Congress on Engineering 2015, pp720-725 [Online Full Text]
6/26/2019 Proceedings of WCE 2015, July 1 - 3, 2015, London, U.K., IAENG Open Access Publication
www.iaeng.org/publication/WCE2015/ 12/20
Romina D. Calvo Olivares, Selva S. Rivera, Pedro A. Baziuk, and Jorge E. Nunez Mc Leod, "Relationships between Main Accidental Variables at Ethanol Fuel Industry," LectureNotes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp720-725
Analysis of Working Postures in Tire Production Sector by OWAS Method
Hatice ESEN, Tugcen HATDPOGLU, and Nilgun FIGLALI
Proceedings of The World Congress on Engineering 2015, pp726-730 [Online Full Text]
Hatice ESEN, Tugcen HATDPOGLU, and Nilgun FIGLALI, "Analysis of Working Postures in Tire Production Sector by OWAS Method," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp726-730
Composite Material Design for Rail Vehicle Innovative Lightweight Components
M. Grasso, A. Gallone, A. Genovese, L. Macera, F. Penta, G. Pucillo, and S. Strano
Proceedings of The World Congress on Engineering 2015, pp731-736 [Online Full Text]
M. Grasso, A. Gallone, A. Genovese, L. Macera, F. Penta, G. Pucillo, and S. Strano, "Composite Material Design for Rail Vehicle Innovative Lightweight Components," LectureNotes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp731-736
An Initial Study of Single Gas Permeation using a Commercial Alumina Membrane
Ifeyinwa R. Orakwe, Ngozi C. Nwogu, Mohammed Kajama, Habiba Shehu, Edidiong Okon, and Edward Gobina
Proceedings of The World Congress on Engineering 2015, pp737-739 [Online Full Text]
Ifeyinwa R. Orakwe, Ngozi C. Nwogu, Mohammed Kajama, Habiba Shehu, Edidiong Okon, and Edward Gobina, "An Initial Study of Single Gas Permeation using a CommercialAlumina Membrane," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp737-739
Mechanical Properties of Sintered B6O-Alkaline Earth Metal Oxide Materials
Enoch N. Ogunmuyiwa, Oluwagbenga T. Johnson, Iakovos Sigalas, and Ayo S. Afolabi
Proceedings of The World Congress on Engineering 2015, pp740-745 [Online Full Text]
Enoch N. Ogunmuyiwa, Oluwagbenga T. Johnson, Iakovos Sigalas, and Ayo S. Afolabi, "Mechanical Properties of Sintered B6O-Alkaline Earth Metal Oxide Materials," LectureNotes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp740-745
Portable Lubrication Analytical Instrumentation for Maintenance Application
Adrian Chaplin, Frances Hardiman, and Daragh Naughton
Proceedings of The World Congress on Engineering 2015, pp746-751 [Online Full Text]
Adrian Chaplin, Frances Hardiman, and Daragh Naughton, "Portable Lubrication Analytical Instrumentation for Maintenance Application," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp746-751
Characterization of Sintered Boron Suboxide with Nickel Compounds
Oluwagbenga T. Johnson, Enoch N. Ogunmuyiwa, Iakovos Sigalas, and Ayo S. Afolabi
Proceedings of The World Congress on Engineering 2015, pp752-756 [Online Full Text]
Oluwagbenga T. Johnson, Enoch N. Ogunmuyiwa, Iakovos Sigalas, and Ayo S. Afolabi, "Characterization of Sintered Boron Suboxide with Nickel Compounds," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp752-756
The Effectiveness of Health and Safety Management in Chinese Shipping: From the Perspective of a Shipmaster'sDecision-making Power
Conghua Xue, David Walters, and Lijun Tang
Proceedings of The World Congress on Engineering 2015, pp757-762 [Online Full Text]
Conghua Xue, David Walters, and Lijun Tang, "The Effectiveness of Health and Safety Management in Chinese Shipping: From the Perspective of a Shipmaster's Decision-making Power," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp757-762
Enhancing Maintenance Practices at a Casting Foundry: Case Study
Ignatio Madanhire, and Charles Mbohwa
Proceedings of The World Congress on Engineering 2015, pp763-768 [Online Full Text]
Ignatio Madanhire, and Charles Mbohwa, "Enhancing Maintenance Practices at a Casting Foundry: Case Study," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp763-768
Influence of Driving Cycles on Euro-3 Scooter Emission Levels
P. Iodice, and A. Senatore
Proceedings of The World Congress on Engineering 2015, pp769-773 [Online Full Text]
P. Iodice, and A. Senatore, "Influence of Driving Cycles on Euro-3 Scooter Emission Levels," Lecture Notes in Engineering and Computer Science: Proceedings of The WorldCongress on Engineering 2015, 1-3 July, 2015, London, U.K., pp769-773
Survey on Greenhouse Gas Emissions in the Steel Industry in Zimbabwe
L. K. Gudukeya, and C. Mbohwa
Proceedings of The World Congress on Engineering 2015, pp774-780 [Online Full Text]
L. K. Gudukeya, and C. Mbohwa, "Survey on Greenhouse Gas Emissions in the Steel Industry in Zimbabwe," Lecture Notes in Engineering and Computer Science: Proceedingsof The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp774-780
Hydrodynamic Performance in Mesoporous Silica Membrane for Lactic Acid and Esterification
O Edidiong, S Habiba, K Mohammed, O Adesola, N Ngozi, O Ifeyinwa, and E Gobina
Proceedings of The World Congress on Engineering 2015, pp781-784 [Online Full Text]
O Edidiong, S Habiba, K Mohammed, O Adesola, N Ngozi, O Ifeyinwa, and E Gobina, "Hydrodynamic Performance in Mesoporous Silica Membrane for Lactic Acid andEsterification," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp781-784
Exergy and Economic Analyses of a Hybrid Solid Oxide Fuel Cell by Computer Simulation
Abdulkareem A. Saka, Bilyaminu S, Ayo S. Afolabi, and Yenkwo K.C
Proceedings of The World Congress on Engineering 2015, pp785-790 [Online Full Text]
Abdulkareem A. Saka, Bilyaminu S, Ayo S. Afolabi, and Yenkwo K.C, "Exergy and Economic Analyses of a Hybrid Solid Oxide Fuel Cell by Computer Simulation," Lecture Notesin Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp785-790
Model of Integrated Production-Inventory-Distribution System: The Case of Billet Steel Manufacturing
Parwadi Moengin, and Rina Fitriana
Proceedings of The World Congress on Engineering 2015, pp791-795 [Online Full Text]
Parwadi Moengin, and Rina Fitriana, "Model of Integrated Production-Inventory-Distribution System: The Case of Billet Steel Manufacturing," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp791-795
Implementing Successful Total Productive Maintenance (TPM) in a Manufacturing Plant
Ignatio Madanhire, and Charles Mbohwa
6/26/2019 Proceedings of WCE 2015, July 1 - 3, 2015, London, U.K., IAENG Open Access Publication
www.iaeng.org/publication/WCE2015/ 13/20
Proceedings of The World Congress on Engineering 2015, pp796-801 [Online Full Text]
Ignatio Madanhire, and Charles Mbohwa, "Implementing Successful Total Productive Maintenance (TPM) in a Manufacturing Plant," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp796-801
Fuzzy Decision Approach Based on QFD and FWA for Selection of Medical Suppliers
Mehtap Dursun, and E. Ertugrul Karsak
Proceedings of The World Congress on Engineering 2015, pp802-807 [Online Full Text]
Mehtap Dursun, and E. Ertugrul Karsak, "Fuzzy Decision Approach Based on QFD and FWA for Selection of Medical Suppliers," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp802-807
Derivation and Validation of a Mathematical Model for a Novel Electric Bicycle
C. Abagnale, M. Cardone, P. Iodice, S. Strano, M. Terzo, and G. Vorraro
Proceedings of The World Congress on Engineering 2015, pp808-813 [Online Full Text]
C. Abagnale, M. Cardone, P. Iodice, S. Strano, M. Terzo, and G. Vorraro, "Derivation and Validation of a Mathematical Model for a Novel Electric Bicycle," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp808-813
Failure Profiles for Maintenance in Industrial Facilities
Jorge E. Nunez Mc Leod, Pedro Baziuk, Romina D. Calvo, and Selva S. Rivera
Proceedings of The World Congress on Engineering 2015, pp814-819 [Online Full Text]
Jorge E. Nunez Mc Leod, Pedro Baziuk, Romina D. Calvo, and Selva S. Rivera, "Failure Profiles for Maintenance in Industrial Facilities," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp814-819
Optimization and Characterization of Biofuel from Waste Cooking Oil
Ikenna C. Emeji, Ayo S. Afolabi, Jalama Kalala, and Ambali S. Abdulkareem
Proceedings of The World Congress on Engineering 2015, pp820-823 [Online Full Text]
Ikenna C. Emeji, Ayo S. Afolabi, Jalama Kalala, and Ambali S. Abdulkareem, "Optimization and Characterization of Biofuel from Waste Cooking Oil," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp820-823
High Performance Valuation of CO2 Gas Separation Ceramic Membrane System
N. C Nwogu, M.N. Kajama, G. Osueke, and E. Gobina
Proceedings of The World Congress on Engineering 2015, pp824-827 [Online Full Text]
N. C Nwogu, M.N. Kajama, G. Osueke, and E. Gobina, "High Performance Valuation of CO2 Gas Separation Ceramic Membrane System," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp824-827
Biodiesel Production over ZnO/TiO2 Catalyst: Effect of Co-solvent, Temperature and Reaction Time
Ndanganeni Mahangani, Ephraim Vunain, Reinout Meijboom, and Kalala Jalama
Proceedings of The World Congress on Engineering 2015, pp828-832 [Online Full Text]
Ndanganeni Mahangani, Ephraim Vunain, Reinout Meijboom, and Kalala Jalama, "Biodiesel Production over ZnO/TiO2 Catalyst: Effect of Co-solvent, Temperature and ReactionTime," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp828-832
Study of Wear and Life Enhancement of Hot Forging Dies Using Finite Element Analysis
Rachapol Iamtanomchai, and Sasithon Bland
Proceedings of The World Congress on Engineering 2015, pp833-838 [Online Full Text]
Rachapol Iamtanomchai, and Sasithon Bland, "Study of Wear and Life Enhancement of Hot Forging Dies Using Finite Element Analysis," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp833-838
Complicating Factors in Healthcare Staff Scheduling Part 1: Case of Nurse Rostering
Michael Mutingi, and Charles Mbohwa
Proceedings of The World Congress on Engineering 2015, pp839-842 [Online Full Text]
Michael Mutingi, and Charles Mbohwa, "Complicating Factors in Healthcare Staff Scheduling Part 1: Case of Nurse Rostering," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp839-842
Complicating Factors in Healthcare Staff Scheduling Part 2: Case of Nurse Re-rostering
Michael Mutingi, and Charles Mbohwa
Proceedings of The World Congress on Engineering 2015, pp843-846 [Online Full Text]
Michael Mutingi, and Charles Mbohwa, "Complicating Factors in Healthcare Staff Scheduling Part 2: Case of Nurse Re-rostering," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp843-846
Implementation of a Lean Six Sigma Project in a Production Line
Valter R. Morais, Sergio D. Sousa, and Isabel Lopes
Proceedings of The World Congress on Engineering 2015, pp847-852 [Online Full Text]
Valter R. Morais, Sergio D. Sousa, and Isabel Lopes, "Implementation of a Lean Six Sigma Project in a Production Line," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp847-852
New Benchmark Instances for the Staff Rostering Problem
Kimmo Nurmi, Jari Kyngas, and Nico Kyngas
Proceedings of The World Congress on Engineering 2015, pp853-857 [Online Full Text]
Kimmo Nurmi, Jari Kyngas, and Nico Kyngas, "New Benchmark Instances for the Staff Rostering Problem," Lecture Notes in Engineering and Computer Science: Proceedingsof The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp853-857
Corrosion Behaviour of Mild Steel in Biodiesel Prepared from Ghee Butter
George I. Ononiwu, Feyisayo V. Adams, Ifeoma V. Joseph, and Ayo S. Afolabi
Proceedings of The World Congress on Engineering 2015, pp858-862 [Online Full Text]
George I. Ononiwu, Feyisayo V. Adams, Ifeoma V. Joseph, and Ayo S. Afolabi, "Corrosion Behaviour of Mild Steel in Biodiesel Prepared from Ghee Butter," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp858-862
Quantifying CO2-eq Emissions of Ore-based PGM Concentration Process in South Africa and Identification of ImmediateEnvironmental Impacts
M.J. Mabiza, and C. Mbohwa
Proceedings of The World Congress on Engineering 2015, pp863-865 [Online Full Text]
M.J. Mabiza, and C. Mbohwa, "Quantifying CO2-eq Emissions of Ore-based PGM Concentration Process in South Africa and Identification of Immediate EnvironmentalImpacts," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp863-865
Lean Healthcare Implementation in Southern Africa: A SWOT Analysis
6/26/2019 Proceedings of WCE 2015, July 1 - 3, 2015, London, U.K., IAENG Open Access Publication
www.iaeng.org/publication/WCE2015/ 14/20
Michael Mutingi, Robert Monageng, and Charles Mbohwa
Proceedings of The World Congress on Engineering 2015, pp866-869 [Online Full Text]
Michael Mutingi, Robert Monageng, and Charles Mbohwa, "Lean Healthcare Implementation in Southern Africa: A SWOT Analysis," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp866-869
Design of Composite Sandwich Shock Absorber Mounting for an Innovative Rail Vehicle End
M. Grasso, L. Lenzi, A. Genovese, L. Macera, F. Penta, G. Pucillo, and S. Strano
Proceedings of The World Congress on Engineering 2015, pp870-875 [Online Full Text]
M. Grasso, L. Lenzi, A. Genovese, L. Macera, F. Penta, G. Pucillo, and S. Strano, "Design of Composite Sandwich Shock Absorber Mounting for an Innovative Rail VehicleEnd," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp870-875
Production and Characterization of Bioethanol from Sugarcane Bagasse as Alternative Energy Sources
Abdulkareem A Saka, Ayo S. Afolabi, and Ogochukwu M.U
Proceedings of The World Congress on Engineering 2015, pp876-880 [Online Full Text]
Abdulkareem A Saka, Ayo S. Afolabi, and Ogochukwu M.U, "Production and Characterization of Bioethanol from Sugarcane Bagasse as Alternative Energy Sources," LectureNotes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp876-880
Assessment of Biofuel Accident Risk: A Preliminary Study
Selva S. Rivera, Romina D. Calvo Olivares, Pedro A. Baziuk, and Jorge E. Nunez Mc Leod
Proceedings of The World Congress on Engineering 2015, pp881-886 [Online Full Text]
Selva S. Rivera, Romina D. Calvo Olivares, Pedro A. Baziuk, and Jorge E. Nunez Mc Leod, "Assessment of Biofuel Accident Risk: A Preliminary Study," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp881-886
The PDBO Algorithm for Discrete Time, Cost and Quality Trade -off in Software Projects with Task Quality Estimated byCOQUAMO
Abdulelah G. Saif, Safia Abbas, and Zaki Fayed
Proceedings of The World Congress on Engineering 2015, pp887-893 [Online Full Text]
Abdulelah G. Saif, Safia Abbas, and Zaki Fayed, "The PDBO Algorithm for Discrete Time, Cost and Quality Trade -off in Software Projects with Task Quality Estimated byCOQUAMO," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp887-893
Investigation of Waste Management Practices and Cleaner Production Application in a Tannery: Case Study
Ignatio Madanhire, and Charles Mbohwa
Proceedings of The World Congress on Engineering 2015, pp894-899 [Online Full Text]
Ignatio Madanhire, and Charles Mbohwa, "Investigation of Waste Management Practices and Cleaner Production Application in a Tannery: Case Study," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp894-899
Propylene Oxidation Using Pt-alumina Impregnated Catalytic Membrane Reactor
M. Kajama, N. Nwogu, and E Gobina
Proceedings of The World Congress on Engineering 2015, pp900-903 [Online Full Text]
M. Kajama, N. Nwogu, and E Gobina, "Propylene Oxidation Using Pt-alumina Impregnated Catalytic Membrane Reactor," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp900-903
Life Cycle Inventory Assessment of Smelting Process of Platinum Group Metals at the Anglo American Platinum Ltd,South Africa
M.J. Mabiza, and C. Mbohwa
Proceedings of The World Congress on Engineering 2015, pp904-907 [Online Full Text]
M.J. Mabiza, and C. Mbohwa, "Life Cycle Inventory Assessment of Smelting Process of Platinum Group Metals at the Anglo American Platinum Ltd, South Africa," LectureNotes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp904-907
Development of Autonomous Maintenance in a Furniture Company
Sara. F. Miranda, and Isabel. S. Lopes
Proceedings of The World Congress on Engineering 2015, pp908-913 [Online Full Text]
Sara. F. Miranda, and Isabel. S. Lopes, "Development of Autonomous Maintenance in a Furniture Company," Lecture Notes in Engineering and Computer Science: Proceedingsof The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp908-913
Development of New Services in Financial Entities in Northern Peru
Eduardo A. Sanchez, Jenny Sagastegui, and Maria Inga
Proceedings of The World Congress on Engineering 2015, pp914-923 [Online Full Text]
Eduardo A. Sanchez, Jenny Sagastegui, and Maria Inga, "Development of New Services in Financial Entities in Northern Peru," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp914-923
Biohydrogen Production by Bacterial Granules Adapted to grow at Different Thermophilic Temperatures
Franklin O. Obazu, Ayo S. Afolabi, Michael O. Daramola, and Vincent M. Gray
Proceedings of The World Congress on Engineering 2015, pp924-928 [Online Full Text]
Franklin O. Obazu, Ayo S. Afolabi, Michael O. Daramola, and Vincent M. Gray, "Biohydrogen Production by Bacterial Granules Adapted to grow at Different ThermophilicTemperatures," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp924-928
Statistical Analysis on Earthquake Fatality Vulnerability in China
Y.Y. Li, G.F. Su, and H.Y. Yuan
Proceedings of The World Congress on Engineering 2015, pp929-932 [Online Full Text]
Y.Y. Li, G.F. Su, and H.Y. Yuan, "Statistical Analysis on Earthquake Fatality Vulnerability in China," Lecture Notes in Engineering and Computer Science: Proceedings of TheWorld Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp929-932
Maintenance Technology Tools to Improve Plant Availability for Dairy Industry: Case Study
Ignatio Madanhire, and Charles Mbohwa
Proceedings of The World Congress on Engineering 2015, pp933-938 [Online Full Text]
Ignatio Madanhire, and Charles Mbohwa, "Maintenance Technology Tools to Improve Plant Availability for Dairy Industry: Case Study," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp933-938
A Conceptual Model for a Hybrid Knowledge-based Lean Six Sigma Maintenance System for Sustainable Buildings
Jasim Aldairi, M K Khan, and J E Munive-Hernandez
Proceedings of The World Congress on Engineering 2015, pp939-944 [Online Full Text]
Jasim Aldairi, M K Khan, and J E Munive-Hernandez, "A Conceptual Model for a Hybrid Knowledge-based Lean Six Sigma Maintenance System for Sustainable Buildings,"Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp939-944
6/26/2019 Proceedings of WCE 2015, July 1 - 3, 2015, London, U.K., IAENG Open Access Publication
www.iaeng.org/publication/WCE2015/ 15/20
Air Spring and Magnetorheological Damper: an Integrated Solution for Vibration Control
F. Renno, S. Strano, and M. Terzo
Proceedings of The World Congress on Engineering 2015, pp945-950 [Online Full Text]
F. Renno, S. Strano, and M. Terzo, "Air Spring and Magnetorheological Damper: an Integrated Solution for Vibration Control," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp945-950
Sustenance of Dark Fermentative Hydrogen Production by an Undefined Bacterial Culture
Franklin O. Obazu, Ayo S Afolabi, Michael O. Daramola, and Vincent M. Gray
Proceedings of The World Congress on Engineering 2015, pp951-954 [Online Full Text]
Franklin O. Obazu, Ayo S Afolabi, Michael O. Daramola, and Vincent M. Gray, "Sustenance of Dark Fermentative Hydrogen Production by an Undefined Bacterial Culture,"Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp951-954
Principal Issues in Human Reliability Analysis
Pedro A. Baziuk, Jorge Nunez Mc Leod, Romina Calvo, and Selva S. Rivera
Proceedings of The World Congress on Engineering 2015, pp955-960 [Online Full Text]
Pedro A. Baziuk, Jorge Nunez Mc Leod, Romina Calvo, and Selva S. Rivera, "Principal Issues in Human Reliability Analysis," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp955-960
On Quantifying Manufacturing Flexibility: An Entropy Based Approach
Ozlen Erkal Sonmez, and Vehbi Tufan Koc
Proceedings of The World Congress on Engineering 2015, pp961-966 [Online Full Text]
Ozlen Erkal Sonmez, and Vehbi Tufan Koc, "On Quantifying Manufacturing Flexibility: An Entropy Based Approach," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp961-966
Evaluation of Heavy Metals in Platinum Tailing Dam Site
Molebogeng P. Nkobane, Ayo S. Afolabi, and Ambali S. Abdulkareem
Proceedings of The World Congress on Engineering 2015, pp967-971 [Online Full Text]
Molebogeng P. Nkobane, Ayo S. Afolabi, and Ambali S. Abdulkareem, "Evaluation of Heavy Metals in Platinum Tailing Dam Site," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp967-971
Tool Development for Support Lean Manufacturing Implementation in Intermittent Production Environment
T. Ferreira, A.A. Baptista, S. Azevedo, and F. Charrua-Santos
Proceedings of The World Congress on Engineering 2015, pp972-977 [Online Full Text]
T. Ferreira, A.A. Baptista, S. Azevedo, and F. Charrua-Santos, "Tool Development for Support Lean Manufacturing Implementation in Intermittent Production Environment,"Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp972-977
Preventive Maintenance Development: A Case Study in a Furniture Company
Bruno. A. Carvalho, and Isabel. S. Lopes
Proceedings of The World Congress on Engineering 2015, pp978-983 [Online Full Text]
Bruno. A. Carvalho, and Isabel. S. Lopes, "Preventive Maintenance Development: A Case Study in a Furniture Company," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp978-983
Development of a Motorized Yam Pounding Machine Design to Improve Standard of Living for Sustainable EconomicDevelopment in Nigeria
Gbasouzor Austin Ikechukwu, and Mbunwe Josephine Muncho
Proceedings of The World Congress on Engineering 2015, pp984-988 [Online Full Text]
Gbasouzor Austin Ikechukwu, and Mbunwe Josephine Muncho, "Development of a Motorized Yam Pounding Machine Design to Improve Standard of Living for SustainableEconomic Development in Nigeria," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London,U.K., pp984-988
Deep Drawing of Asymmetric Cups through Conical Die without Blank Holder
M.A. Hassan, I. M. Hassab-Allah, L. M. A. Hezam, N. A. Mardi, and M. Hamdi
Proceedings of The World Congress on Engineering 2015, pp989-995 [Online Full Text]
M.A. Hassan, I. M. Hassab-Allah, L. M. A. Hezam, N. A. Mardi, and M. Hamdi, "Deep Drawing of Asymmetric Cups through Conical Die without Blank Holder," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp989-995
Waste Vegetable Oils to Biodiesel over Al2O3 - Supported SnO2 Catalyst: Effect of Support Pore Size
Vusumuzi C Zulu, Ephraim Vunain, Reinout Meijboom, and Kalala Jalama
Proceedings of The World Congress on Engineering 2015, pp996-998 [Online Full Text]
Vusumuzi C Zulu, Ephraim Vunain, Reinout Meijboom, and Kalala Jalama, "Waste Vegetable Oils to Biodiesel over Al2O3 - Supported SnO2 Catalyst: Effect of Support PoreSize," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp996-998
A Probabilistic Model of Periodic Condition Monitoring with Imperfect Inspections
Ahmed Raza, and Vladimir Ulansky
Proceedings of The World Congress on Engineering 2015, pp999-1004 [Online Full Text]
Ahmed Raza, and Vladimir Ulansky, "A Probabilistic Model of Periodic Condition Monitoring with Imperfect Inspections," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp999-1004
The 2015 International Conference of Mechanical Engineering
An Electron Microscopy Study of Sintering in Three Dental Porcelains
Alexander J. G. Lunt, Tee K. Neo, and Alexander M. Korsunsky
Proceedings of The World Congress on Engineering 2015, pp1005-1010 [Online Full Text]
Alexander J. G. Lunt, Tee K. Neo, and Alexander M. Korsunsky, "An Electron Microscopy Study of Sintering in Three Dental Porcelains," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1005-1010
Multi-modal Microscopy Characterisation of Nodal Markings in Flax Fibre
Hongjia Zhang, Tan Sui, Lisbeth G. Thygesen, Patrick O'Brien, and Alexander M. Korsunsky
Proceedings of The World Congress on Engineering 2015, pp1011-1015 [Online Full Text]
6/26/2019 Proceedings of WCE 2015, July 1 - 3, 2015, London, U.K., IAENG Open Access Publication
www.iaeng.org/publication/WCE2015/ 16/20
Hongjia Zhang, Tan Sui, Lisbeth G. Thygesen, Patrick O'Brien, and Alexander M. Korsunsky, "Multi-modal Microscopy Characterisation of Nodal Markings in Flax Fibre," LectureNotes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1011-1015
Experimental Analysis of the Relative Motion of a Gear Pair under Rattle Conditions Induced by Multi-harmonicExcitation
Renato Brancati, Ernesto Rocca, Sergio Savino, and Francesco Timpone
Proceedings of The World Congress on Engineering 2015, pp1016-1021 [Online Full Text]
Renato Brancati, Ernesto Rocca, Sergio Savino, and Francesco Timpone, "Experimental Analysis of the Relative Motion of a Gear Pair under Rattle Conditions Induced byMulti-harmonic Excitation," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K.,pp1016-1021
An Explicit Method for Geometrically Nonlinear Dynamic Analysis of Spatial Beams
Chu Chang Huang, Wen Yi Lin, Fumio Fujii, and Kuo Mo Hsiao
Proceedings of The World Congress on Engineering 2015, pp1022-1027 [Online Full Text]
Chu Chang Huang, Wen Yi Lin, Fumio Fujii, and Kuo Mo Hsiao, "An Explicit Method for Geometrically Nonlinear Dynamic Analysis of Spatial Beams," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1022-1027
Design and Motion Study of a Wheelchair for Disabled People
I. Geonea, N. Dumitru, and A. Margine
Proceedings of The World Congress on Engineering 2015, pp1028-1033 [Online Full Text]
I. Geonea, N. Dumitru, and A. Margine, "Design and Motion Study of a Wheelchair for Disabled People," Lecture Notes in Engineering and Computer Science: Proceedings ofThe World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1028-1033
Analyzing the Anterior Knee Laxity During Passive Flexion
Ahmed Imran
Proceedings of The World Congress on Engineering 2015, pp1034-1037 [Online Full Text]
Ahmed Imran, "Analyzing the Anterior Knee Laxity During Passive Flexion," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress onEngineering 2015, 1-3 July, 2015, London, U.K., pp1034-1037
Effect of Wire EDM on Microstructure and Fracture Toughness of 7075-T6511 Aluminum Alloy
Daniel M. Madyira
Proceedings of The World Congress on Engineering 2015, pp1038-1042 [Online Full Text]
Daniel M. Madyira, "Effect of Wire EDM on Microstructure and Fracture Toughness of 7075-T6511 Aluminum Alloy," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1038-1042
Calculation of the Residual Stresses of Hollow Cylinder under Unsteady Thermal Action
Evgeniy Dats, Sergey Mokrin, and Evgenii Murashkin
Proceedings of The World Congress on Engineering 2015, pp1043-1046 [Online Full Text]
Evgeniy Dats, Sergey Mokrin, and Evgenii Murashkin, "Calculation of the Residual Stresses of Hollow Cylinder under Unsteady Thermal Action," Lecture Notes in Engineeringand Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1043-1046
Wear Characterization of a Coated Sintered Steel for Moulds
M. Grasso, F. Penta, G.P. Pucillo, and V. Rosiello
Proceedings of The World Congress on Engineering 2015, pp1047-1052 [Online Full Text]
M. Grasso, F. Penta, G.P. Pucillo, and V. Rosiello, "Wear Characterization of a Coated Sintered Steel for Moulds," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1047-1052
Weld Procedural Effect on the Performance of Ferrous Based Hardfacing Deposit on Mild Steel Substrate
K.M. Kenchi Reddy, and K.Thanusha
Proceedings of The World Congress on Engineering 2015, pp1053-1058 [Online Full Text]
K.M. Kenchi Reddy, and K.Thanusha, "Weld Procedural Effect on the Performance of Ferrous Based Hardfacing Deposit on Mild Steel Substrate," Lecture Notes in Engineeringand Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1053-1058
Thermal Stress Analysis of a Dam Wall by Finite Element Model
L. K. Gudukeya, and C. Mbohwa
Proceedings of The World Congress on Engineering 2015, pp1059-1065 [Online Full Text]
L. K. Gudukeya, and C. Mbohwa, "Thermal Stress Analysis of a Dam Wall by Finite Element Model," Lecture Notes in Engineering and Computer Science: Proceedings of TheWorld Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1059-1065
Preparation and Characterization of Nanocomposite Soy-Carbon Nanotubes (SPI/CNTs) Adhesive from Soy ProteinIsolate
Olawumi O. Sadare, Michael O. Daramola, and Ayo S. Afolabi
Proceedings of The World Congress on Engineering 2015, pp1066-1070 [Online Full Text]
Olawumi O. Sadare, Michael O. Daramola, and Ayo S. Afolabi, "Preparation and Characterization of Nanocomposite Soy-Carbon Nanotubes (SPI/CNTs) Adhesive from SoyProtein Isolate," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1066-1070
Experimental Study of Direct Contact Condensation of Steam on Water Droplets
Semra GUMRUK, and Murat K. AKTAS
Proceedings of The World Congress on Engineering 2015, pp1071-1075 [Online Full Text]
Semra GUMRUK, and Murat K. AKTAS, "Experimental Study of Direct Contact Condensation of Steam on Water Droplets," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1071-1075
Adaptive Suspension of Vehicles with Ultra-wide Range of Control Performance
A. Dubrovskiy, S. Aliukov, S. Dubrovskiy, and A. Alyukov
Proceedings of The World Congress on Engineering 2015, pp1076-1083 [Online Full Text]
A. Dubrovskiy, S. Aliukov, S. Dubrovskiy, and A. Alyukov, "Adaptive Suspension of Vehicles with Ultra-wide Range of Control Performance," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1076-1083
A Comparison Among Different Methods to Estimate Vehicle Sideslip Angle
Flavio Farroni, Nicola Pasquino, Ernesto Rocca, and Francesco Timpone
Proceedings of The World Congress on Engineering 2015, pp1084-1090 [Online Full Text]
Flavio Farroni, Nicola Pasquino, Ernesto Rocca, and Francesco Timpone, "A Comparison Among Different Methods to Estimate Vehicle Sideslip Angle," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1084-1090
6/26/2019 Proceedings of WCE 2015, July 1 - 3, 2015, London, U.K., IAENG Open Access Publication
www.iaeng.org/publication/WCE2015/ 17/20
Method of Velocity Determination Through Measurements of the Vehicle Body Deformation - Plane ApproximationMethod
Przemyslaw Kubiak, Marek Wozniak, Viktor Karpushkin, Piotr Jozwiak, Gustavo Ozuna, Szymon Madziara, Mateusz Najbert, and AndrzejSzosland
Proceedings of The World Congress on Engineering 2015, pp1091-1096 [Online Full Text]
Przemyslaw Kubiak, Marek Wozniak, Viktor Karpushkin, Piotr Jozwiak, Gustavo Ozuna, Szymon Madziara, Mateusz Najbert, and Andrzej Szosland, "Method of VelocityDetermination Through Measurements of the Vehicle Body Deformation - Plane Approximation Method," Lecture Notes in Engineering and Computer Science: Proceedings ofThe World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1091-1096
Shape Deformation Induced Stress Variation in Throughwall Critical Cracked Pipe Bends Loaded by Internal Pressure
Sumesh S, AR. Veerappan, and S Shanmugam
Proceedings of The World Congress on Engineering 2015, pp1097-1101 [Online Full Text]
Sumesh S, AR. Veerappan, and S Shanmugam, "Shape Deformation Induced Stress Variation in Throughwall Critical Cracked Pipe Bends Loaded by Internal Pressure,"Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1097-1101
Performance of Enugu Sub-Bituminous Coal in Fluidized Bed Combustor
Abdulkarim Nasir, Shuaibu N. Mohammed, and Abubakar Mohammed
Proceedings of The World Congress on Engineering 2015, pp1102-1106 [Online Full Text]
Abdulkarim Nasir, Shuaibu N. Mohammed, and Abubakar Mohammed, "Performance of Enugu Sub-Bituminous Coal in Fluidized Bed Combustor," Lecture Notes in Engineeringand Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1102-1106
Pitch Angle Analysis of NACA 2415 Airfoil
Ferit YILDIZ, Anil Can TURKMEN, Cenk CELIK, and Halil Ibrahim SARAC
Proceedings of The World Congress on Engineering 2015, pp1107-1110 [Online Full Text]
Ferit YILDIZ, Anil Can TURKMEN, Cenk CELIK, and Halil Ibrahim SARAC, "Pitch Angle Analysis of NACA 2415 Airfoil," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1107-1110
The Potentials of Concentrating Solar Thermal Power (CSTP) in Meeting Saudi Future Energy Gap
O. Phillips Agboola
Proceedings of The World Congress on Engineering 2015, pp1111-1115 [Online Full Text]
O. Phillips Agboola, "The Potentials of Concentrating Solar Thermal Power (CSTP) in Meeting Saudi Future Energy Gap," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1111-1115
Numerical Analysis of Heat Transfer Characteristics of an Orthogonal and Obliquely Impinging Air Jet on a Flat Plate
Alenezi A., Teixeira J., and Addali A.
Proceedings of The World Congress on Engineering 2015, pp1116-1121 [Online Full Text]
Alenezi A., Teixeira J., and Addali A., "Numerical Analysis of Heat Transfer Characteristics of an Orthogonal and Obliquely Impinging Air Jet on a Flat Plate," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1116-1121
Characterization of Functionally Graded Commercially Pure Titanium (CPTI) and Titanium Carbide (TiC) Powders
Esther T. Akinlabi, and Stephen A. Akinlabi
Proceedings of The World Congress on Engineering 2015, pp1122-1126 [Online Full Text]
Esther T. Akinlabi, and Stephen A. Akinlabi, "Characterization of Functionally Graded Commercially Pure Titanium (CPTI) and Titanium Carbide (TiC) Powders," Lecture Notesin Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1122-1126
Boundary Element Analysis of Building Slabs
Charles Jaster de Oliveira, Joao Batista de Paiva, and Angelo Vieira Mendonca
Proceedings of The World Congress on Engineering 2015, pp1127-1132 [Online Full Text]
Charles Jaster de Oliveira, Joao Batista de Paiva, and Angelo Vieira Mendonca, "Boundary Element Analysis of Building Slabs," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1127-1132
Experimental and FE analysis of Bonded Single-lap Joints Strengthened by Self-tapping Screws
Alexandr A. Shakirov, Sergei B. Sapozhnikov, and Sergei D. Vaulin
Proceedings of The World Congress on Engineering 2015, pp1133-1137 [Online Full Text]
Alexandr A. Shakirov, Sergei B. Sapozhnikov, and Sergei D. Vaulin, "Experimental and FE analysis of Bonded Single-lap Joints Strengthened by Self-tapping Screws," LectureNotes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1133-1137
Low Velocity Impact Response of Composite Panels for Aeronautical Applications
M. Grasso, F. Penta, G.P. Pucillo, F. Ricci, and V. Rosiello
Proceedings of The World Congress on Engineering 2015, pp1138-1143 [Online Full Text]
M. Grasso, F. Penta, G.P. Pucillo, F. Ricci, and V. Rosiello, "Low Velocity Impact Response of Composite Panels for Aeronautical Applications," Lecture Notes in Engineeringand Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1138-1143
Aerodynamic Analysis of Blended Winglet for Low Speed Aircraft
Pooja Pragati, and Sudarsan Baskar
Proceedings of The World Congress on Engineering 2015, pp1144-1148 [Online Full Text]
Pooja Pragati, and Sudarsan Baskar, "Aerodynamic Analysis of Blended Winglet for Low Speed Aircraft," Lecture Notes in Engineering and Computer Science: Proceedings ofThe World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1144-1148
Machinery Maintenance Yesterday, Today and Tomorrow in the Manufacturing Sector
Tawanda Mushiri, and Charles Mbohwa
Proceedings of The World Congress on Engineering 2015, pp1149-1153 [Online Full Text]
Tawanda Mushiri, and Charles Mbohwa, "Machinery Maintenance Yesterday, Today and Tomorrow in the Manufacturing Sector," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1149-1153
Analysis of Possible Ways of Power Distribution in an All-wheel Drive Vehicle
A. Keller, and S. Aliukov
Proceedings of The World Congress on Engineering 2015, pp1154-1158 [Online Full Text]
A. Keller, and S. Aliukov, "Analysis of Possible Ways of Power Distribution in an All-wheel Drive Vehicle," Lecture Notes in Engineering and Computer Science: Proceedings ofThe World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1154-1158
An Evolved Version of Thermo Racing Tyre for Real Time Applications
Flavio Farroni, Aleksandr Sakhnevych, and Francesco Timpone
Proceedings of The World Congress on Engineering 2015, pp1159-1164 [Online Full Text]
6/26/2019 Proceedings of WCE 2015, July 1 - 3, 2015, London, U.K., IAENG Open Access Publication
www.iaeng.org/publication/WCE2015/ 18/20
Flavio Farroni, Aleksandr Sakhnevych, and Francesco Timpone, "An Evolved Version of Thermo Racing Tyre for Real Time Applications," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1159-1164
Space Advantage Provided by De-Laval Nozzle and Bell Nozzle over Venturi
Omkar N. Deshpande, and Nitin L. Narappanawar
Proceedings of The World Congress on Engineering 2015, pp1165-1168 [Online Full Text]
Omkar N. Deshpande, and Nitin L. Narappanawar, "Space Advantage Provided by De-Laval Nozzle and Bell Nozzle over Venturi," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1165-1168
Stress Analysis of Uniform Circular Cylindrical Shells with Large Circular Holes
Rishicca Kamalarajah, William Stoffberg, John W. Bull, and Mahmoud Chizari
Proceedings of The World Congress on Engineering 2015, pp1169-1172 [Online Full Text]
Rishicca Kamalarajah, William Stoffberg, John W. Bull, and Mahmoud Chizari, "Stress Analysis of Uniform Circular Cylindrical Shells with Large Circular Holes," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1169-1172
Reverse Engineering Design of a Hydraulic Turbine Runner
Alper Kaplan, Huseyin Cetinturk, Kutay Celebioglu, and Selin Aradag
Proceedings of The World Congress on Engineering 2015, pp1173-1176 [Online Full Text]
Alper Kaplan, Huseyin Cetinturk, Kutay Celebioglu, and Selin Aradag, "Reverse Engineering Design of a Hydraulic Turbine Runner," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1173-1176
Modeling of the Mechanical Responses of Nanocrystalline Metals and Alloys
Kazeem O. Sanusi, Ayo S. Afolabi, Edison Muzenda, and Esther T. Akinlabi
Proceedings of The World Congress on Engineering 2015, pp1177-1182 [Online Full Text]
Kazeem O. Sanusi, Ayo S. Afolabi, Edison Muzenda, and Esther T. Akinlabi, "Modeling of the Mechanical Responses of Nanocrystalline Metals and Alloys," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1177-1182
Finding Out the Commonalities in Functional Expressions for Demagnetizing Factor of Quasi-solid and Solid Magnets
A.A. Sandulyak, D.A. Sandulyak, V.A. Ershova, D.O. Kiselev, and A.V. Sandulyak
Proceedings of The World Congress on Engineering 2015, pp1183-1185 [Online Full Text]
A.A. Sandulyak, D.A. Sandulyak, V.A. Ershova, D.O. Kiselev, and A.V. Sandulyak, "Finding Out the Commonalities in Functional Expressions for Demagnetizing Factor of Quasi-solid and Solid Magnets," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K.,pp1183-1185
Dynamic Tests on Ring Shear Apparatus
G. Di Massa, S. Pagano, and M. Ramondini
Proceedings of The World Congress on Engineering 2015, pp1186-1190 [Online Full Text]
G. Di Massa, S. Pagano, and M. Ramondini, "Dynamic Tests on Ring Shear Apparatus," Lecture Notes in Engineering and Computer Science: Proceedings of The WorldCongress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1186-1190
Anti-Microbial Studies Using Sulphur Nano Particles on Dandruff Causing Malassezi Yeasts
Sudarsan Baskar, Pooja Pragati, and Karthika Chandrababu
Proceedings of The World Congress on Engineering 2015, pp1191-1195 [Online Full Text]
Sudarsan Baskar, Pooja Pragati, and Karthika Chandrababu, "Anti-Microbial Studies Using Sulphur Nano Particles on Dandruff Causing Malassezi Yeasts," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1191-1195
Microstructural Characterization of Friction Stir Lap Welds of Aluminium Incorporated with Titanium Carbide
Olayinka O. Abegunde, Esther T. Akinlabi, and Daniel M. Madyira
Proceedings of The World Congress on Engineering 2015, pp1196-1200 [Online Full Text]
Olayinka O. Abegunde, Esther T. Akinlabi, and Daniel M. Madyira, "Microstructural Characterization of Friction Stir Lap Welds of Aluminium Incorporated with Titanium Carbide,"Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1196-1200
Efficient Power Distribution in an All-wheel Drive Truck
A. Keller, and S. Aliukov
Proceedings of The World Congress on Engineering 2015, pp1201-1206 [Online Full Text]
A. Keller, and S. Aliukov, "Efficient Power Distribution in an All-wheel Drive Truck," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress onEngineering 2015, 1-3 July, 2015, London, U.K., pp1201-1206
Wheel Force Transducer for Shimmy Investigation
D. De Falco, G. Di Massa, S. Pagano, and S. Strano
Proceedings of The World Congress on Engineering 2015, pp1207-1212 [Online Full Text]
D. De Falco, G. Di Massa, S. Pagano, and S. Strano, "Wheel Force Transducer for Shimmy Investigation," Lecture Notes in Engineering and Computer Science: Proceedings ofThe World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1207-1212
Modal Dynamic Analysis of the Wicket Gate Mechanism from a Hydraulic Turbine
N. Dumitru, S. Dumitru, C. Copilusi, D. Semenescu, and I. Geonea
Proceedings of The World Congress on Engineering 2015, pp1213-1218 [Online Full Text]
N. Dumitru, S. Dumitru, C. Copilusi, D. Semenescu, and I. Geonea, "Modal Dynamic Analysis of the Wicket Gate Mechanism from a Hydraulic Turbine," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1213-1218
Comparative Assessment of MRR, TWR and Surface Integrity in Rotary and Stationary Tool EDM for Machining AISI D3Tool Steel
Anand Prakash Dwivedi, and Sounak Kumar Choudhury
Proceedings of The World Congress on Engineering 2015, pp1219-1224 [Online Full Text]
Anand Prakash Dwivedi, and Sounak Kumar Choudhury, "Comparative Assessment of MRR, TWR and Surface Integrity in Rotary and Stationary Tool EDM for Machining AISID3 Tool Steel," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1219-1224
The Use of Nano-composite Ceramic Membranes for Gas Separations
Habiba Shehu, Edidiong Okon, and Edward Gobina
Proceedings of The World Congress on Engineering 2015, pp1225-1229 [Online Full Text]
Habiba Shehu, Edidiong Okon, and Edward Gobina, "The Use of Nano-composite Ceramic Membranes for Gas Separations," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1225-1229
Experimental Determination of Cavitation Characteristics of Hydraulic Turbines
6/26/2019 Proceedings of WCE 2015, July 1 - 3, 2015, London, U.K., IAENG Open Access Publication
www.iaeng.org/publication/WCE2015/ 19/20
Gizem Demirel, Ece Ayli, Kutay Celebioglu, Yigit Tascioglu, and Selin Aradag
Proceedings of The World Congress on Engineering 2015, pp1230-1234 [Online Full Text]
Gizem Demirel, Ece Ayli, Kutay Celebioglu, Yigit Tascioglu, and Selin Aradag, "Experimental Determination of Cavitation Characteristics of Hydraulic Turbines," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1230-1234
Assessing and Monitoring Student Participation in Engineering Laboratory using Radio Frequency Identification (RFID)- Satisfying ABET EC2000 Outcome 3b
P. O. Agboola, and Majid Hashemipour
Proceedings of The World Congress on Engineering 2015, pp1235-1239 [Online Full Text]
P. O. Agboola, and Majid Hashemipour, "Assessing and Monitoring Student Participation in Engineering Laboratory using Radio Frequency Identification (RFID) - SatisfyingABET EC2000 Outcome 3b," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K.,pp1235-1239
Effect of Punch Diameters on Shear Extrusion of 6063 Aluminium Alloy
Mutiu F Erinosho, Saheed O Ojo, Joseph S Ajiboye, and Esther T Akinlabi
Proceedings of The World Congress on Engineering 2015, pp1240-1242 [Online Full Text]
Mutiu F Erinosho, Saheed O Ojo, Joseph S Ajiboye, and Esther T Akinlabi, "Effect of Punch Diameters on Shear Extrusion of 6063 Aluminium Alloy," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1240-1242
On Optimum Pressure Computing by Prescribed Displacements in Elastic-Creep Material. Finite Deformations
Maxim Anop, Evgenii Murashkin, Vladislav Mikhalichuk, and Marina Polonik
Proceedings of The World Congress on Engineering 2015, pp1243-1246 [Online Full Text]
Maxim Anop, Evgenii Murashkin, Vladislav Mikhalichuk, and Marina Polonik, "On Optimum Pressure Computing by Prescribed Displacements in Elastic-Creep Material. FiniteDeformations," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1243-1246
Packing Application Using Printed Carbon Nanotube Based Super Capacitors
Pooja Pragati, Sudarsan Baskar, and Karthika Chandrababu
Proceedings of The World Congress on Engineering 2015, pp1247-1251 [Online Full Text]
Pooja Pragati, Sudarsan Baskar, and Karthika Chandrababu, "Packing Application Using Printed Carbon Nanotube Based Super Capacitors," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1247-1251
Dynamic Modeling of a Multiple Launch Rocket System
Serdar Sert, and Yigit Tascioglu
Proceedings of The World Congress on Engineering 2015, pp1252-1256 [Online Full Text]
Serdar Sert, and Yigit Tascioglu, "Dynamic Modeling of a Multiple Launch Rocket System," Lecture Notes in Engineering and Computer Science: Proceedings of The WorldCongress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1252-1256
Development of Artificial Foot of Active Transfemoral Prosthesis System using Topology Optimization
K.-H. Lee, J. H. Chung, and C.-H. Lee
Proceedings of The World Congress on Engineering 2015, pp1257-1260 [Online Full Text]
K.-H. Lee, J. H. Chung, and C.-H. Lee, "Development of Artificial Foot of Active Transfemoral Prosthesis System using Topology Optimization," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1257-1260
Steady Analysis of NACA Flush Inlet at High Subsonic and Supersonic Speeds
Taimur A. Shams, and Masud J
Proceedings of The World Congress on Engineering 2015, pp1261-1266 [Online Full Text]
Taimur A. Shams, and Masud J, "Steady Analysis of NACA Flush Inlet at High Subsonic and Supersonic Speeds," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1261-1266
Structural Optimization of a Total Replacement Hip Prosthesis
M. Grasso, F. Penta, G.P. Pucillo, V. Rosiello, and A. Piscopo
Proceedings of The World Congress on Engineering 2015, pp1267-1272 [Online Full Text]
M. Grasso, F. Penta, G.P. Pucillo, V. Rosiello, and A. Piscopo, "Structural Optimization of a Total Replacement Hip Prosthesis," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1267-1272
Convex Surface Heat Transfer Behaviour in the Presence of Obliquely Impinging Non-Isothermal Slot Jets
Satyanand Abraham, Abhijeet B. Kakade, and R. P. Vedula
Proceedings of The World Congress on Engineering 2015, pp1273-1278 [Online Full Text]
Satyanand Abraham, Abhijeet B. Kakade, and R. P. Vedula, "Convex Surface Heat Transfer Behaviour in the Presence of Obliquely Impinging Non-Isothermal Slot Jets," LectureNotes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1273-1278
Gouging Abrasion Resistance of Austenitic Manganese Steel with Varying Titanium
Eduardo R. Magdaluyo Jr., Marthony S. Ausa, and Robert J. Tinio
Proceedings of The World Congress on Engineering 2015, pp1279-1282 [Online Full Text]
Eduardo R. Magdaluyo Jr., Marthony S. Ausa, and Robert J. Tinio, "Gouging Abrasion Resistance of Austenitic Manganese Steel with Varying Titanium," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1279-1282
Design and Analysis of Modified Front Double Wishbone Suspension for a Three Wheel Hybrid Vehicle
Sarvadnya Ajinkya Thakare, Prasad C Antapurkar, Divyaj S Shah, P R Dhamangaonkar, and S N Sapali
Proceedings of The World Congress on Engineering 2015, pp1283-1286 [Online Full Text]
Sarvadnya Ajinkya Thakare, Prasad C Antapurkar, Divyaj S Shah, P R Dhamangaonkar, and S N Sapali, "Design and Analysis of Modified Front Double Wishbone Suspensionfor a Three Wheel Hybrid Vehicle," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London,U.K., pp1283-1286
Initial Study of Heterogeneous Catalysts Behaviour and Carrier Gas Permeation with Catalytic Inorganic CeramicMembrane for Lactic Acid Esterification Applications
O Edidiong, and E Gobina
Proceedings of The World Congress on Engineering 2015, pp1287-1291 [Online Full Text]
O Edidiong, and E Gobina, "Initial Study of Heterogeneous Catalysts Behaviour and Carrier Gas Permeation with Catalytic Inorganic Ceramic Membrane for Lactic AcidEsterification Applications," Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K.,pp1287-1291
Design and Analysis of a Lightweight Disc-Type Magnetorheological Device
Okan Topcu, Yigit Tascioglu, and Erhan I. Konukseven
Proceedings of The World Congress on Engineering 2015, pp1292-1295 [Online Full Text]
6/26/2019 Proceedings of WCE 2015, July 1 - 3, 2015, London, U.K., IAENG Open Access Publication
www.iaeng.org/publication/WCE2015/ 20/20
Okan Topcu, Yigit Tascioglu, and Erhan I. Konukseven, "Design and Analysis of a Lightweight Disc-Type Magnetorheological Device," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1292-1295
The Study and Analysis of Using Wing Dihedral on the Side of an Aircraft's Static Stability
Erika R. S. Teixeira, Beatrice Harumy de F. Yokota, Dilermando Ferreira Neto, Paulo Andre M. Pimentel, Sahmira Paula Santos dos Santos,Luciana Barbosa dos Santos, and Antonio Claudio Kieling
Proceedings of The World Congress on Engineering 2015, pp1296-1300 [Online Full Text]
Erika R. S. Teixeira, Beatrice Harumy de F. Yokota, Dilermando Ferreira Neto, Paulo Andre M. Pimentel, Sahmira Paula Santos dos Santos, Luciana Barbosa dos Santos, andAntonio Claudio Kieling, "The Study and Analysis of Using Wing Dihedral on the Side of an Aircraft's Static Stability," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1296-1300
Stochastic Modeling Simulation to Represent Thermal Physics of Abrasive Machining Based on Parallel ComputationTechnology
Aleksandr A. Dyakonov
Proceedings of The World Congress on Engineering 2015, pp1301-1306 [Online Full Text]
Aleksandr A. Dyakonov, "Stochastic Modeling Simulation to Represent Thermal Physics of Abrasive Machining Based on Parallel Computation Technology," Lecture Notes inEngineering and Computer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1301-1306
About the Impact Behaviour of Railway Fastening Systems
M. Grasso, F. Penta, G.P. Pucillo, and V. Rosiello
Proceedings of The World Congress on Engineering 2015, pp1307-1312 [Online Full Text]
M. Grasso, F. Penta, G.P. Pucillo, and V. Rosiello, "About the Impact Behaviour of Railway Fastening Systems," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1307-1312
A Seismic Isolation System for Lightweight Structures based on MRE Devices
R. Brancati, G. Di Massa, S. Pagano, and S. Strano
Proceedings of The World Congress on Engineering 2015, pp1313-1318 [Online Full Text]
R. Brancati, G. Di Massa, S. Pagano, and S. Strano, "A Seismic Isolation System for Lightweight Structures based on MRE Devices," Lecture Notes in Engineering andComputer Science: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1313-1318
On the Question of Mathematical Model of an Overrunning Clutch
S. Aliukov, A. Keller, and A. Alyukov
Proceedings of The World Congress on Engineering 2015, pp1319-1324 [Online Full Text]
S. Aliukov, A. Keller, and A. Alyukov, "On the Question of Mathematical Model of an Overrunning Clutch," Lecture Notes in Engineering and Computer Science: Proceedings ofThe World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1319-1324
Utilization of Vertical Axis Wind Turbines on Remote Islands
Argyrios D. Stouras, George Kouzilos, and Dimitrios E. Manolakos
Proceedings of The World Congress on Engineering 2015, pp1325-1329 [Online Full Text]
Argyrios D. Stouras, George Kouzilos, and Dimitrios E. Manolakos, "Utilization of Vertical Axis Wind Turbines on Remote Islands," Lecture Notes in Engineering and ComputerScience: Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1325-1329
Mixed Convection Heat Transfer from a Vertical Plate Embedded in a Bidisperse Porous Medium
Ching-Yang Cheng
Proceedings of The World Congress on Engineering 2015, pp1330-1335 [Online Full Text]
Ching-Yang Cheng, "Mixed Convection Heat Transfer from a Vertical Plate Embedded in a Bidisperse Porous Medium," Lecture Notes in Engineering and Computer Science:Proceedings of The World Congress on Engineering 2015, 1-3 July, 2015, London, U.K., pp1330-1335
International Association of Engineers
© Copyright International Association of Engineers