3333333

25

Water S

uction

♦ A = Very Common Item - Good Stock ♦ B = Common Item - Moderate Stock♦ C = Less Common Item ♦ P = Production ♦ N = Check for availability

Refer to the Technical Section on the selection, installation, use and maintenance of hose & fi ttings prior to use.

© 2019 New-Line Hose & Fittings new-line.com

Size Length* Part Number Ends Weight Stk Price/ea Female ‘C’ Camlock x Male NPT 1-1/2” 20ft A2120150X20-02 C x MNPT 20.3 P 2 20 A2120200X20-02 C x MNPT 29.0 C 3 20 A2120300X20-02 C x MNPT 51.2 P 4 20 A2120400X20-02 C x MNPT 86.8 P 6 20 A2120600X20-02 C x MNPT 139.3 P Female NPSM x Male NPT 1-1/2” 20ft A2120150X20-NPS NPSM 20.1 P 2 20 A2120200X20-NPS NPSM 28.8 P 3 20 A2120300X20-NPS NPSM 51.0 P Vic Groove x Groove - Crimp Sleeves 3” 20ft A2120300X20-VGC Grooved 44.0 P 4 20 A2120400X20-VGC Grooved 65.0 P 6 20 A2120600X20-VGC Grooved 155.0 P 8 20 A2120800X20-VGC Grooved 260.0 P 10 20 A21201000X20-VGC Grooved 360.0 P*Any “non-stock” lengths can be coupled from our bulk inventory.

Our Contractors Water Suction hose is suitable for heavy duty, rugged applications where more economical PVC hoses will not stand up, such as in heavy construction, irrigation, mining, and dewatering. Its rubber construction provides excellent resistance to cutting, gouging, and weathering. It is not designed for food grade applications, high volume water transfer, pressure pumping water over a distance, or continuous heated applications such as glycol transfer. NL2120 has been traditionally classifi ed as a ‘suction hose’, but it is also used for discharge where the hose must retain its shape. Most ‘water’ hoses are not designed for “critical” water applications (such as on permanently installed pumps), as water hoses typically only have a 3:1 safety factor and will fail in pressure or surge applications over time. For critical water suction or discharge applications we recommend using a petroleum or chemical hoses with higher safety factors (hoses up to 250-400-500-600 psi available).*This hose is not designed for heated glycol or permanent installation in piping systems, especially in short lengths for pump connectors, generators, chillers, HVAC units, or other applications where hard pipe, expansion joints, or stainless steel braided hoses are typically used.Temperature Range: -300C (-220F) to +850C (1850F)Construction: Tube: Black SBR rubber blend. Cover: Smooth, black SBR rubber blend. Reinforcement: Rigid steel wire helix embedded between layers of synthetic textile cords.Typical Fittings: Camlocks, N10 combination nipples, short shanks, strainers, punch clamps, various bolt clamps, strapping. Inside Outside *W.Pressure/ Bend Weight ♦ Regular Std 20’ Bulk Bulk** Diameter Part # Diameter Vac. Rating Radius lbs/ft Stock Price/ft Increments Price/ft Length 1” NL2120-100 1.38” 150 psi / Full in/Hg 4” .50 C 1-1/4 NL2120-125 1.65 150 / Full 5 .61 C 1-1/2 NL2120-150 1.95 150 / Full 6 .75 B 2 NL2120-200 2.48 150 / Full 8 1.00 A 2-1/2 NL2120-250 3.02 150 / Full 10 1.35 C 3 NL2120-300 3.46 150 / Full 12 1.75 A 4 NL2120-400 4.57 150 / Full 16 2.50 A 5 NL2120-500 5.69 150 / Full 23 4.15 C 6 NL2120-600 6.75 150 / Full 27 5.90 B 8 NL2120-800 9.25 150 / 28 40 9.85 B 10 NL2120-1000 11.00 *75-150 / 28 50 13.50 C 12 NL2120-1200 13.15 *75-150 / 28 60 16.80 C *All working pressures & vacuum ratings are recommended @ 200C (700F); 10”&12” pressures depend on current stock. Higher pres-sure hoses available, such as some petroleum, oilfi eld, concrete, and chemical hoses rated to 250-600psi. **Lengths to 400’ available on request.

$ 5.386.116.548.29

10.8012.1018.3427.8632.1053.00

110.35136.50

100/200ft100/200100/200100/200100/200100/200100/200100/200100/200

20/4020/4020/40

$ 6.197.037.539.54

12.4213.9221.1032.0436.92

---

$ 7.007.958.51

10.7814.0415.7323.8536.2241.7368.90

--

$ 164.60205.91304.72441.75940.36

$ 163.20207.94312.01

PORPORPORPORPOR

NL2120 ~ CONTRACTORS WATER SUCTIONWTR

Z01

Assembly part numbers also available with male x female aluminum camlocks (suffi x -01) as well as “crimp sleeves”

instead of standard band clamps (use suffi x -01C)

new-line

For high pressure, hardwall “water” hoses up to 300psi, refer to our NL3011 PetroTransfer. For higher temperature applications, we also carry NL3023 Hi Temp Petro Transfer.

For short lengths to compensate for vibration or expansion, we also stock a variety of expansion joints and pump connectors.