no.51 e
TRANSCRIPT
Doc No.BSH209E 2 2010/06/02 1/3
<Anticorrosion vinyl tape>
No.51 Outline Anticorrosion vinyl tape NO.51 Developed for prevention of corrosion and protection of various types
of pipelines. Using vinyl chloride with excellent electrical property and chemical resistance as base material together with thick- coated synthetic rubber-base adhesive, it brings out superior durability and anticorrosion property. Being highly flexible, it is easy to wind and suitable for work in temperature and for work on joint or flexural area.
Structure
Fig-1 Structure;№51
Application ●For anticorrosion/protection of various types of pipelines. ●For anticorrosion/protection of power cable and communication cab. ●For anticorrosion/protection of pipes under severe condition such as mine and chemical factory. Features ●Consists of flexibility and corrosion resistance. ●Low temperature properties, electrical insulation and chemical resistance is excellent. ●It fits snugly against any shape, no matter how complex. ●Offer superior durability and corrosion resistance. ●Provide superior sealing and cushioning.
Vinyl chloride base
Synthetic rubber adhesive
Doc No.BSH209E 2 2010/06/02 2/3
Standard size and color
Table-1 Standard sizes and color
Part NO. Color Thickness(㎜)
Width (㎜)
Length (m)
№51(standard)black Black №51-SG Silver-Gray №51-Ivory Ivory №51-W Blue №51-SW Sky-Blue
0.4
25 50 75
10
Characteristic
●General properties
Table-2 General properties Item Test result Test method
Thickness(mm) 0.4 -
Ordinary state 8.0 Adhesive Strength (to stainless steel)
(N/25mm width) *After soaking in Hot Water 8.0
According to JIS Z 0237(2009)
Ordinary state 7.0 Adhesive Strength (to backing)
(N/25mm width) *After soaking in Hot Water 7.5
According to JIS Z 0237(2009)
Tensile Load (N/25mm width) Ordinary state 120
Elongation (%) Ordinary state 250
According to JIS Z 1901 5.2
Heat resistance Good According to JIS Z 1901 5.6
Cold resistance Good According to JIS Z 1901 5.7
Insulative resistance(MΩ) 100~1000000
According to JIS Z 1901 5.4 JIS K8150 JIS C 1301
Change of PH ±1.0 According to JIS Z 1901 5.5
***Values listed above are typical and not guaranteed.
Doc No.BSH209E 2 2010/06/02 3/3
●Chemical resistance After 1000hrs.immersion in each chemical, the test was conducted.
Table-3 Chemical resistance Contents Chemicals
Tensile Strength (N/25mm width)
Elongation (%)
Volume Resistivity (Ωcm)
Before immersion 120 260 5x1013 10% NaCl 130 220 4x1013 10% NaOH 130 230 3x1013 10% H2SO4 110 210 4x1013
●Water tightness
A tape-wrapped (50mmφ) steel pipe is immersed in 3% saline solution and the change of insulation resistance with time was measured.
(one round by half-wrap)
1.0E+08
1.0E+09
1.0E+10
1.0E+11
0 1 2 3 4 5 6 7 8 9 10
Period (month)
Insu
lation R
esi
stan
ce(Ω
)
Fig-2; Change of Watertightness with Days
7Cautions Concerning Use ●The tape should be stored in a dark and cool place. ●The tape is not suitable for application to the area exposed to the ambient temperature of 70℃ or
above. ●Petrolatum is dissolved by organic solvents. Please do not contact with organic solvents.