Noticeonstitute the warranty of any or implied.

gies Co., Ltd.

uilding, Huawei Technologies n, Longgang District, Shenzhen,

9.huawei.com

CC

A

T

N

opyright © 2008 Huawei Technologies o., Ltd.

ll Rights Reserved1 No part of this manual may be reproduced or

transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

2rademarks

3 and HUAWEI are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this manual are the property of their respective holders.

4otice

5 The information in this manual is subject to change without notice. Every effort has been made in the preparation of this manual to ensure accuracy of the contents, but all statements, information, and recommendations in this

manual do not ckind, expressed

Huawei TechnoloAddress:6 Administration B

Co., Ltd., BantiaP. R. China

Postal Code: 51812Website: http://www

1

Table of Contents 1Introduction 1

Packing List ................................................1Front View ..................................................1Rear View...................................................2

Installation 3Installing the Battery...................................3Installing the UIM Card...............................3Installing the Power Adapter ......................4Installing the Indoor Antenna......................4Connecting the Terminal ............................4Viewing the Signal Strength .......................5Mounting the FWT......................................6

General Functions 7Booting the FWT ........................................7Making or Answering Calls.........................7Adjusting the Voice Volume .......................7

Advanced Functions 9Supplementary Services ............................9Internet Services ........................................9Facsimile Function ...................................10

Troubleshooting 11Warnings and Precautions 12

1Table of Contents

1

1Introduction1Introduction

st are described as follows:

itch

ne port 1ne port 2

rtt

port

89 10

12 3

4 56

T

Packing List

Note • The local radio signal strength helps you

select an indoor or outdoor antenna.

• To access the Internet, you need to purchase the required data suite. For more information, please consult your local sales agent.

Front View

Note The figures are only for your reference, please refer color and shape to product.

he main ports on the host are described as follows:

The LEDs on the ho

Item QuantityFWT host 1Power adapter 1Phone cable 1Battery (Rechargeable) 1Certificate of Quality 1User Guide 1

NO. Item1 FWT sw

2 Telepho

3 Telepho

4 Data po

5 DC inpu

6 Antenna

7

Rear View

2

unting brackets

ard slot

container

port

container cover

3 2

1

Rear ViewNO. Item7 Signal strength indicators: More indica-

tors indicate stronger signal strength.

8 Battery indicator

The battery serves as the only power supply (without external power adapter):

• In blue: The battery is in full electricity.

• In red: The battery is in medium electric-ity.

• In red with blinking: The battery needs to be recharged.

The external power adapter is in use (with the battery inside):

• In red: The battery is being charged.

• In blue: The battery is fully charged.

9 Power indicator

In blue: The FWT is connected with the power adapter.

10 Operating status indicator

In blue: The FWT is in work.

No. Item1 Wall-mo

2 R-UIM c

3 Battery

4 Battery

5 Battery

5 4

3

2Installation2Installation

e UIM Card

e local agent to determine whether he UIM card or not.ard and contact point are vulnera-age such as scarring or bending,

ed to insert or remove it with care.

he card slot. Put the side with a ards and the side with a golden Make sure the card is completely .

Ita

Note Before installing or removing the battery, indoor antenna, or R-UIM card, you need to swich off the FWT and disconnect the FWT from the power adapter. To prevent lighting from injuring human body, remove the outdoor antenna, too.

Installing the Battery

Note • When the ambient temperature exceeds the

temparature allowed for charging, the system will stop charging the battery.

• When the power adapter is in use, the FWT will automatically charge the battery and stop charging when the battery is fully charged.

• Remove the battery if the FWT is left unused for a long period.

• Make sure that the battery has been charged for more than 8 hours before it supplies power for the FWT at the first time. The charging time depends on the environmental temperature and battery life.

nsert the connection cable of the battery into the bat-ery port (make sure the battery is correctly inserted), nd then seat the battery in the battery container.

Installing th

Note • Consult th

to install t• The UIM c

ble to damso you ne

Insert the card into tcorner cutting backwcontact downwards. inserted into the slot

Installing the Power Adapter

4

antenna with the antenna port t in the direction shown in the fig-rew the antenna, ensuring that

is secure.

the Terminal

the FWT and disconnect the power

able provided by the manufacturer. can be connected to a telephone at the same time, but the voice and ces cannot be used simultaneously. se only one service at a time.

Installing the Power AdapterIn normal conditions, the FWT relies on the external power adapter for power supply.

1 Make sure that the FWT is switched off.

2 Insert one end of the power adapter into the DC input port, and the other end into the power sup-ply jack.

3 Switch on the FWT and wait for a few seconds. If the power indicator is in blue, the connection is correct.

Use the battery only in the case that the electricity has failed or the external power adapter is unavail-able. You must make sure that the battery has been fully charged before putting it into use.

Installing the Indoor Antenna

1 Make sure that the FWT is switched off.

2 Align the indooron the FWT hosure, and then scthe connection

Connecting

Note • Switch off

adapter.• Use the c• The FWT

and a PC data serviYou can u

Viewing the Signal Strength

5

2Installation FWT to a PC

data service suite, you can use necting the FWT to a PC, and

the FWT on the PC. For details, ent.

Signal Strengthnd wait until some signal re on or until you can hear the

indicators remain off for 5 minutes tone is heard. No signals can be

t all signal LEDs still keep off. The poor. If the dial tone can be heard on the antenna towards it.

Connecting the FWT to a Telephone

The FWT provides two telephone ports. They are in parallel connection and use the same number.

Connecting the FWT to a Facsimile Set

If your FWT supports facsimile, please consult you local agent.

Connecting the

After purchasing thedata services by conmaintain and debugconsult your local ag

Viewing thePower on the FWT astrength indicators adial tone.

• If all signal strengthand only the re-dial received.

• Turn the antenna busignal quality is veryin some area, positi

Mounting the FWT

6

unting brackets with the screws, ds the wall, and mate the brack-ensuring the host is stable.

The required signal strength is level 1 or above.

Note If the signal strength is in level 1 or 2, the signal strength indicators of level 1 or 2 should be on for 80 percent of the time.

Mounting the FWTHorizontal Mounting

Place the FWT on a smooth surface with cool air and good ventilation. Keep the FWT away from other objects around for at least 10 cm.

Vertical Mounting

Fix two wall screws into the wall with the screw heads extending approximately 3 mm from the surface of

the wall, align the mopush the host towarets with the screws,

Number of Idi-cators Are On

Signal Level Signal Strength

0 0 Poor

1 1 OK

2 2 Good

7

3General Functions

3General Functions

8*n# to set the wait time for auto the FWT, where n is in the range 0 ng n to 0 will disable the function. , the FWT will automatically dial out ed number in n seconds. By default me is 7 seconds.e the auto dial-out wait time func-

ust restart the FWT. terval between two consecutive cannot exceed the wait time for ut of the FWT. use supplementary services, you he numbers starting from * or # , ial the number in a regular way with me of auto dial-out as non-0.

e Voice Volumeoice volume either when the tele-mode or working mode. Four vol-ble, with level 1 being the lowest st.

To

Booting the FWThe boot process of the FWT will last about 20 sec-nds. Then you can view the signal strength.

Note If the signal strength indicators remain off, the FWT may be faulty or the network is not cov-ered the area. Please consult the local agent.

Making or Answering Calls

1 Before off-hook, make sure at least one signal strength LED is on.

2 Dial the number in either of the following ways:

• Dial a telephone number in a regular way, and the number will be dialed out in several seconds.

• Dial all the digits of the number plus one #. The FWT will immediately dial the number.

3 Make sure to hook on the telephone in place, so that you can receive calls.

Note • Enter ##5

dial-out ofto 9. SettiOtherwiseyour desirthe wait ti

• To validattion, you m

• The dial innumerals auto dial-o

• When youmay dial tyou can dthe wait ti

Adjusting thYou can adjust the vphone is in standby ume levels are availaand level 4 the highe

Adjusting the Voice Volume

8

tting after hearing the dial tone

olume During a Call

ession with the remote party, you o adjust the volume.

1 to 4 to select the desired vol-from 1 to 4 represents volumn .

he desired volume, press * key hear the confirmation tone of a successfully set the volume

mode.

he reject tone of "toot, toot" when olume, you have pressed an incor- this setting attempt is failed. How-ssion mode remains and you can rations from Step 1 to 4 to adjust again.

Adjusting the Volume in Standby Mode

1 Hook off and you can hear the dial tone, which means the telephone service is available.

2 Press ##1 to adjust the volume.

3 Press keys from 1 to 4 to select the desired vol-umn. The keys from 1 to 4 represents volumn level from 1 to 4.

4 After selecting the desired volume, press * key to save it. If you hear the confirmation tone of a "toot", you have successfully set the volume level.

5 You can hear the dial tone again, which means that the FWT has returned to the off-hook state, and you can proceed to make other operations.

Note If you hear the reject tone of "toot, toot", you have pressed an incorrect key. The syetem will return to the off-hook state, and you can retry to

make the seagain.

Adjusting the V

1 If you are in a scan press ##1 t

2 Press keys fromumn. The keys level from 1 to 4

3 After selecting tto save it. If you"toot", you havelevel.

4 Keep in session

Note If you hear tsetting the vrect key andever, the seperform opethe volume

9

4Advanced Functions

4Advanced Functionse Network Connection

e Internet, you need to configure ion. If you want to apply the can skip operations in this sec-

s, enter the phone number (by ne number is #777.)

l tab, select ETS modem in the box.

tab, select "Prompt for name certificate, etc."

Connection

n follow the instructions to select type, the device that will be used nection.

number and the name of the . Click Finish.

YH

TE

Ib

Supplementary Servicesou need the network carrier to enable the services. ere are several typical services for your reference:

hree-Way Calling, Call Transfer, Call Forwarding, mergency Call.

Internet Servicesnstall the modem driver and management program efore the first use.

1 Connect the FWT to a PC with a compatible data cable. The system finds the new hardware and installs the modem driver automatically.

2 Wait for a while, and then the installation inter-face is displayed. Follow the instructions.

3 When the installation completes, a shortcut icon displays and the FWT is restarted.

4 Double-click the shortcut icon, and then you can make the following options.

Configuring th

Before accessing ththe network connectdefault settings, yoution.

1 Click Propertiedefault, the pho

2 On the GeneraConnect Using

3 On the Optionsand password

Creating a New

1 Click New. Thethe connection to make the con

2 Enter the phonenew connection

Facsimile Function

10

facsimile. For details, consult your

simile

h ##0 before the number and * er hearing "toot", press send but-

hat the called party configure the

csimile

after the "toot", the FWT is in fac-ode.

ile receive mode:

wait the sound of "toot".

T.

ke a call or send a fax when the csimile receive mode, but you can-a call.

Dialing Up to the Internet

Select a connection or create a new connection. Then Click Connect. If the user name and password are correct, you can connect to the Internet.

Note The connection rate shown after the dial-up is connected may be the connection rate of the data port. For details, consult your carrier.

Facsimile Function

Note • The function requires the network support.

The success rate of sending or receiving is related to the performance of the network.

• When using the facsimile function, do not use other services.

• Here, only the brief introduction of using the facsimile set is provided. For detailed options, refer to the instructions of relevant facsimile sets.

• In certain network conditions, the FWT sup-ports the voice to facsimile function, that is, you can operate in normal mode to send or

receive a carrier.

Sending a Fac

Dial the number, witafter the number. Aftton.

It is recommended tauto-receive mode.

Receiving a Fa

1 Dial ##36* and simile receive m

2 Exit from facsim

• Dial ##30* and

• Restart the FW

Note You can maFWT is in fanot answer

11

5Troubleshooting5Troubleshooting

t be received. facisimile receive mode.s. facisimile receive mode. Please st.fails (pressing the send key after f "toot")he following reasons: is weak.rong fax number.

s configured manually receiving receiving.busy.n cannot be used.d with two phones at the same e, the other phone's handfree . You can use the handset.an not be installed automatically.

is powered on and the USB cable

erating system is Windows 2000, (32-bit or 64-bit).ter, if there is a virtual CD-ROM, t 'open'. Then you can find the ouble-click it to start the installation.s cannot help you, contact your

TscCIpCFCmSsCIhnTnCFTCaasiTF

he FWT is not connected to a power adapter. The witch of the FWT is switched on, but the battery indi-ator and the operating status indicator is still off.heck whether the battery is installed.

f the battery is installed, the problem may result from low ower supply of the battery. Please charge the battery.onnect the power adapter to the FWT, switch the WT, but the power indicator remains off.heck whether the output voltage of the power adapter eet the requirement of the FWT.witch on the FWT, the power indicator is in normal tate, but all signal strength indicators are off.heck whether the antenna is correctly installed.

f an outdoor antenna is used, place the antenna at a igher position, or adjust the antenna direction (only ecessary for the directional antenna.)he signal strength indicator is in normal state, but o dial tone is heard after off hook.heck the connection between the telephone and the WT.he voice is unstable and discontinuous.heck how many signal indicators are on. If less than 1 re on, the network signal is weak. Use an outdoor ntenna or move the FWT to a position with stronger ignal. The signal strength may be led by environmental nterference. For details, consult the carrier.he volume is too loud or too low.ollowing the "Adjusting the Volume during a call"

The facsimile cannoConfigure the FWT toAnswering a call failCheck if the FWT is inexit from this mode firSending a facsimile hearing the sound oIt may be caused by t1. The network signal2. You have dialed a w3. The called party hamode but not started 4. The called party is The handfree functioIf an FWT is connectetime, and one is in usfunction may not workThe modem driver c1. Restart your FWT.2. Make sure the FWTis well connected.3. Make sure your opWindows XP, or Vista4. Check your compuright-click it and selecETS_setup.exe and d5. If the above methodlocal dealer.

6Warnings and Precautions while driving. Secure the FWT on its he FWT on the seat or other places in a sudden stop or collision.

d regulations of airline companies. efore boarding an aircraft.

ment

c storage media such as magnetic s near the FWT. Radiation from the nformation stored on them.

battery, or other accessories in con-gnetic field, such as the induction

e oven. Otherwise, circuit failure, fire, lt.e FWT, the battery or the power

t sources such as fire or a heater; or e gases; or areas with electrical appli-at. Otherwise, it will cause fire, explo-f the FWT.

eds to eliminate heat during working, power supply in a ventilated and shad-roof the FWT or put something on it or e as well as inflammable and explo-

ntains precision devices, you should d away from moist materials.

WT, please power off the FWT, and ower supply and take out the battery. T, please disconnect the external

12

Tt

B•

•

E

PTSsdta

HPf

•

••

T

o use the FWT correctly and safely, read the following cau-ions and let your children know these before using the FWT.

asic CautionsAccording to the packing list, check items in the package box to make sure that they are complete and undamaged.Before installing and using the FWT, read this user guide carefully

lectronic Device

ower off your FWT near high-precision electronic devices. he FWT may affect the performance of these devices.uch devices include hearing aids, pacemakers, fire alarm ystems, automatic gates, and other automatic-control evices. If you are using an electronic medical device, consult

he device manufacturer and confirm whether the radio waves ffect the operation of the electronic device.

ospitalay attention to the following points in hospitals or health care

acilities:

Do not take your FWT into the operating room (OR), intensive care unit (ICU), or coronary care unit (CCU)Power off your FWT near medial devicesObserve any instructions wherever the use of wireless device is prohibited

raffic Safety

• Do not use your FWTholder. Do not place twhere it can get loose

• Observe the rules anPower off your FWT b

Operating Environ

• Do not place magneticards and floppy diskFWT may erase the i

• Do not put your FWT,tainers with strong macooker and microwavor explosion may resu

• Do not place or use thadapter near any heaplaces with flammablances that give out hesion and breakdown o

• Because the FWT neput the FWT and the owy place. Never airpplace it near water, firsive materials.

• Because the FWT coput it in a dry place an

• Before cleaning the Fthen disconnect the pBefore moving the FWpower supply.

13

6Warnings and Precautions

ou are not allowed to modify the archi-esign of FWT. You must bear any con-m the operation without permission.

d to conform to the authoritative inter-cy (RF) specifications. Use FWT by Huawei only.

for this transmitter must be installed to distance of at least 20cm from all per-

for emergency calls. However, connec-nnot be guaranteed. You should never for essential communications.

into eyes, do not rub them. Wash with medical assistance immediately.tacts skin or cloth, wash with clean avoid irritation to the skin. battery in fire. Otherwise, the battery .attery on your FWT, do not push the attery fluid leak out or the battery

oles of the battery with metallic materi-

• Do not subject your FWT, battery, and power adapter to seri-ous collision or shock. Otherwise, battery leakage, FWT malfunction, overheats, fire, or explosion may result.

• Do not place sharp metal objects such as pins near the ear-piece. The earpiece may attract these objects and hurt you when you are using the FWT.

• Do not place the FWT in the area over the air bag or in the air bag deployment area. Otherwise, the FWT may hurt you owing to the strong force when the air bag inflates.

• In raining and lightning, disconnect the power adapter from external power supply and power off the FWT, In this case, if the outdoor antenna is used, do not touch the FWT and antenna.

• Put your FWT, battery, and power adapter in places beyond the reach of children. Do not allow children to use the FWT, battery, or power adapter without guidance.

• Do not touch the antenna when a call is going on. Touching the antenna may affect call quality and cause the FWT to operate at a power level higher than needed.

• The network signal condition will directly affect the quality and stability of the call. Consequently, you should place the FWT in a place where it can receive network signal well. Do not put FWT in a building with an iron or metal roof. The dis-tance between FWT and other metal materials (such as metal brackets or metal doors and windows) should be greater than 25cm and the distance between FWTs should be greater than 30cm.

• Do not open the chassis in any case and the device should be maintained by a qualified maintenance department.

• Without permission, ytecture and security dsequence resulted fro

• Your FWT is designenational radio frequenaccessories approved

• The antenna(s) used provide a separation sons.

Emergency Call

You can use your FWT tions in all conditions carely solely on the FWT

Battery

• If the battery fluid getsclean water and seek

• If the battery fluid conwater immediately to

• Do not dispose of themay ignite or explode

• When installing the bbattery by force lest bcrack.

• Do not connect two pals such as cables.

14

ater comes into the power adapter the plug of the power adapter from the

r adapter from the socket before clean-therwise, electric shock or short-

ry or power adapter may result.e power adapter is properly inserted when charging the battery. Improper electric shock, fire, or explosion.

vy object on the power cord of the t damage, change, or pluck the power

le

ble, observe the following require-WT or PC may fail.

is used to connect the FWT to a PC, le with the FWT first.unicates with a PC, do not disconnect e FWT or PC may fail.the USB cable, disconnect it from the

tection

al laws in proposing of the package consumed batteries and used FWT,

0R001_01 Part Number: 31019114

• Do not disassemble the battery or solder the battery poles. Otherwise, fluid leakage, overheat, fire, or explosion may result.

• If there is battery leakage, smoke, or strange smell, stop using the battery and keep it away from open flame to avoid fire or explosion.

• Disconnect the power adapter and take out the battery when the FWT is not used for a long time.

• Do select its self-contained complete battery and power adapter; otherwise, the FWT may be spoiled. Huawei Tech-nologies Co., Ltd is not responsible for any consequences caused by using non-standard batteries or power supplies. Dispose of used batteries according to the instructions.

• Dispose of the battery according to local laws or regulations.

Power Adapter

• Use AC power as specified for the power adapter. Any viola-tion of this rule may result in fire or malfunction of the power adapter.

• Do not short-circuit the power adapter. Short-circuiting the power adapter may cause fire or malfunction of the power adapter.

• Remove the dust on the power plug regularly.• Do not use worn-out power cords. Otherwise, electric shock,

short-circuiting of the power adapter, or fire may result.• Do not put the power adapter near the container filled with

liquid such as water. If the liquid comes into the power adapter, electrical leakage or other faults may result.

• If the liquid such as waccidentally, remove socket immediately.

• Disconnect the poweing or maintaining it. Ocircuiting of the batte

• Ensure the plug of thinto the power socketinsertion may result in

• Do not place any heapower adapter. Do nocord.

Using the USB Cab

When using the USB caments. Otherwise, the F

• When the USB cableconnect the USB cab

• When the FWT commthe USB cable with th

• When disconnecting PC first.

Environmental Pro

Please abide by the locmaterials of your FWT, and try to recycle them.

Version: V10