nu horizons electronics portal august 2010
DESCRIPTION
Global distributor of advanced technology semiconductor, display, illumination, power, system and telecommunication solutionsTRANSCRIPT
June 2010
Featured Products
MachXO
The MachXO family of non-volatile infinitely reconfigurable Programmable Logic Devices (PLDs) is designed for applications traditionally implemented using CPLDs or low-density FPGAs. Designed for a wide range of low density applications including system control designs, the MachXO PLD family is used in a variety of end markets including consumer, automotive, communications, computing, industrial and medical.
more on page 9...
In This Issue:
Development ToolsLattice Semiconductor
Power ManagementLattice SemiconductorLinear Technology
Programmable LogicLattice Semiconductor
SensorsSTMicroelectronics
Wireless DigiNordic Semiconductor
August 2010
2
De
ve
lop
me
nt
Too
ls Lattice ispMACH 4000ZE Pico Development Kit
Lattice MachXO Mini Development Kit
The ispMACH 4000ZE Pico Development Kit is an easy-to-use and low-cost platform for evaluating and designing with ispMACH 4000ZE CPLDs. Using the
preloaded Pico Power Demo design provided with the development kit, you can measure power draw in a variety of operating modes and see common CPLD
applications running on an LC4256ZE-MN144 a 256-macrocell 144-pin csBGA device. You can then build your own designs using the free downloadable
reference design source code, implementing these features in less than an hour.
The MachXO Mini Development Kit is an easy
to use, low-cost platform to accelerate the
evaluation of MachXO PLDs. Using the preloaded
mini system-on-chip (Mini SoC) design provided
with the development kit, you can now test within
minutes I2C, SPI, UART and SRAM interfaces in
addition to the 8-bit LatticeMico8 microcontroller.
You can then build your own designs using the
free downloadable reference design source code,
implementing these features in less than an hour.
The board can be controlled with menu driven
interface via terminal programs running on a host
PC.
Development Kit Details:
ispMACH 4000ZE Pico Evaluation Board
Pre-programmed Pico Power Demo
ispMACH 4000ZE device (LC4256ZE-5MN144C)
Power Manager II device (ispPAC-POWR6AT6-01SN32I)
LCD panel
USB mini jack socket for power, JTAG programming, and I2C interface
2X15 header landing for off-board expansion provides access to LC4256ZE GPIOs, POWR6AT6 VMON inputs, I2C, and JTAG chain
Push button for global reset
4-bit DIP switch to user-defined inputs
3.3V and 2.5V supply rails
Current and voltage sensor circuits
Battery or USB power source
RoHS-compliant packaging and process
Marked for CE, China RoHS Environmental-Friendly Use Period (EFUP) and Waste Electrical and Electronic Equipment (WEEE) Directives
One USB connector cable
QuickSTART Guide
Development Kit Details:
MachXO Mini Evaluation Board
MachXO device (LCMXO2280C-4TN144C)
2 Mbit SPI Flash Memory
1 Mbit SRAM
I2C Temperature Sensor
USB mini jack sockets for power, JTAG
programming, and RS-232 debugging
2X16 header for off-board expansion provides
access to top and right side MachXO banks
Push buttons for sleep mode and reset
4-bit DIP switch to user-defined inputs
ADC/DAC circuit
Sleep circuit
8 LEDs for user-defined outputs
RoHS-compliant packaging and process
Two USB connector cables
QuickSTART Guide
Ordering information
Part number— LC4256ZE-P-EVN Price -- $69
Ordering information
Part number— LCMXO2280C-M-EVN Price -- $89
Nu Horizons offers a wide range of development / evaluation boards, tools and kits. For more information, please visit www.nuhorizons.com/development
De
ve
lop
me
nt To
ols
3
Ordering information
Part number— LC4256ZE-P-EVN Price -- $69
Ordering information
Part number— LCMXO2280C-M-EVN Price -- $89
Lattice MachXO Control Development Kit
Lattice Power Manager II Hercules Development Kit
The MachXO Control Development Kit is a platform for rapidly prototyping
system control designs using MachXO PLDs. Using the preloaded control
system-on-chip (Control SoC) design provided with the development kit, you
can now test within minutes board control functions including fan speed
control based on temperature monitoring, LCD control, complete power supply
monitoring and reset distribution. You can then build your own designs using the
free downloadable reference design source code, implementing these features
in less than an hour. The board can be controlled with a menu driven interface
via terminal programs running on a host PC.
The Power Manager II Hercules Development Kits are versatile, ready to use hardware platforms for evaluating and designing with Power Manager II
devices. Using the preloaded Board Digital Management design provided with the development kit, you can test within minutes power management
functions such as power supply hot swap control, redundant supply selection and payload power management. You can then build your own designs using
the free downloadable reference design source code, implementing these features in less than an hour. Provisions are included to emulate power supply
monitoring, temperature monitoring, supply fault logging, and reset generation. The kits also demonstrate enhanced power management features such as
closed loop margining.
Development Kit Details:
MachXO Control Evaluation Board Preloaded Control SoC demo MachXO device (LCMXO2280) Power Manager II device (ispPAC-POWR1014A) 2Mbit SPI Flash & 1Mbit SRAM
I2C temperature sensor Current and voltage sensor circuits On-board fan Interface to 16 x 2 LCD panel * SD memory and Compact Flash memory card sockets * Audio output channel
Expansion header for SPI & I2C LEDs & switches Standard USB cable for device programming and I2C communication RS-232/USB & JTAG/USB interface 3" x 1" prototyping area RoHS-compliant packaging and process AC adapter (international plugs) QuickSTART Guide
* LCD panel and SD / Compact Flash memory not included in the development kit
Key Features:
Hercules evaluation board
Preloaded Board Digital Management demo
Power Manager II device (ispPAC-POWR1220AT8)
MachXO device (LCMXO2280)
AC adapter (international plugs)
USB Connector Cable
RoHS-compliant packaging and process
Ordering information
Part number— LCMXO2280C-C-EVN Price -- $165
Ordering information
Part number— PAC-POWR1220AT8-HS-EVN Price -- $109
Nu Horizons offers a wide range of development / evaluation boards, tools and kits. For more information, please visit www.nuhorizons.com/development
De
ve
lop
me
nt
To
ols
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Lattice ProcessorPM Development Kit Get started integrating multiple power management ICs fast with the ProcessorPM Development Kit. The kit is a versatile, ready to use hardware platform for
evaluating and designing with ProcessorPM power management devices, and includes evaluation circuits that emulate a power supply bus and processor
interface. The kit includes a pre-configured processor support demo that will support hundreds of microprocessor, DSP, ASSP, or ASIC power management
scenarios. The demo integrates three key support functions for a processor: voltage supervisor, watchdog timer (WDT), and reset generator. You may extend
or modify the pre-configured demo using Lattice’s PAC-Designer® software. In addition, the board can be used to evaluate differing power supply margin/
trim scenarios.
Development Kit Details:
ProcessorPM Evaluation Board Pre-Configured Processor Support Demo ProcessorPM device (POWR605) Power Manager II device (POWR6AT6) 3.3V, 2.5V, and 1.8V Supply Rails LEDs Slide Potentiometer 2x14 Expansion Header USB Mini Jack Socket (Program/Power) 2 Push Buttons 4-Bit DIP Switch JTAG and I2C Header Landings RoHS-compliant packaging and process USB connector cable QuickSTART Guide
Ordering information
Part number— PACPOWR605-P-EVN Price -- $49
Automotive
Computing Architectures
Connectivity
Development Tools
Meet the Experts
Motor Control Applications
Operating Systems
Power MOSFET
Security
System Design Technologies
Display Technology
October 11-14Hyatt Regency, Orange County, CA
Over 120 sessions and 100 hours of lectures and hands-on labs on an array of technologies and application topics
Select Nu Horizons as your preferred distributor and automatically be entered for a chance to win a free iPad.
Visit www.RenesasDevCon.com to register.
4
Nu Horizons offers a wide range of development / evaluation boards, tools and kits. For more information, please visit www.nuhorizons.com/development
5
Po
we
r Ma
na
ge
me
nt
Lattice’s ispPAC® Power Manager II family integrates intelligent power sequencing and precision fault monitoring with power supply voltage margining and trimming using digital closed loop technology – all in a single low-cost chip. The Power Manager II devices contain precision threshold comparators to monitor power supplies for faults, a 10-bit Analog-to-Digital (ADC) converter for measuring power supply voltages, Digital-to-Analog Converters (DAC) to control power supply output voltages, a CPLD to intelligently control power supply sequencing and generation of supervisory signals, programmable timers for controlling the speed of power supply turn on/off processes, charge pumped outputs for driving n-Channel MOSFETs, digital inputs for controlling and monitoring system-level signals, and an I2C interface.
Lattice ispPAC Power Manager II FamilyIntegrate Power Manager – Lower Cost
Key Features and Benefits:
The First Programmable Analog + Digital Solution! No external analog or digital components required
Programmability and integration simplifies system development in multi-voltage board designs
Ruggedized CPLD with Up to 48-Macrocells for Sequencing and Supervisory Signal Logic Large operating power supply range (3.3V + 20% to 3.3V - 15%)
High glitch immunity
Efficient logic implementation
Up to 20 outputs, 12 analog inputs, and 6 digital inputs
Optional Voltage Measurement with 10-bit ADC 2mV resolution up to 2V, 6mV resolution up to 5.8V
Used for digital closed loop trimming
Up to 8 On-chip DACs for Margining and Trimming Convenient supply trimming/margining control
Trimming includes Point of Load (POL) supplies
Up to 12 Differential Voltage Sensors for Monitoring Immune to noise on ground plane
Improved monitoring and measurement accuracy
Power supply voltage trimming to within 1%
Dual, Precision Programmable Comparator per Input Reliable board operation and fast fault detection
Over-voltage, under-voltage and window flags
Up to 4 Programmable Delay Timers (32μs to 2 Seconds) Provide Flexible Timing Control Up to 4 High Voltage MOSFET Driver Outputs Provide Power Supply Ramp Rate Control Optional I2C Bus Interface Control power supply sequence
Measure voltage through ADC
Closed loop power supply control via DAC
Supports Power-Down Feature (10μA) 32-Pin QFN, 48-Pin TQFP, 100-Pin TQFP Industrial Temperature JTAG In-System Programmable with Non-Volatile E2CMOS® Configuration Storage
Power Manager II – A Superior Solution
Cost Savings Through Integration Significantly reduce cost per function by integrating
hot-swap controller, OR’ing controller, power feed,
sequencing controller, reset generator, voltage/current
measurement and trimming and margining functions
Increased Reliability Supervise every supply
0.7% accuracy
Differential measurement
Respond to events in <50μS
Reduced component count
Power management algorithm is ruggedized through simulation
Reduced Risk Device configuration stored in on-chip non-volatile memory
Change trip points, timing and sequencing without board re-spins
Use JTAG to make updates after assembly
Power management algorithm is implemented using software
Visit www.RenesasDevCon.com to register.
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
6
Po
we
r M
an
ag
em
en
t
The LTM®8033 is an electromagnetic compatible (EMC) 36V, 3A DC/DC μModule®
buck converter designed to meet the radiated emissions requirements of EN55022.
Conducted emission requirements can be met by adding standard filter components.
Included in the package are the switching controller, power switches, inductor, filters
and all support components. Operating over an input voltage range of 3.6V to 36V, the
LTM8033 supports an output voltage range of 0.8V to 24V, and a switching frequency
range of 200kHz to 2.4MHz, each set by a single resistor. Only the bulk input and
output filter capacitors are needed to finish the design.
The LTM8033 is packaged in a thermally enhanced, compact (11.25mm × 15mm ×
4.32mm) overmolded land grid array (LGA) package suitable for automated assembly
by standard surface mount equipment.
LTM8033 — Ultralow Noise EMC 36VIN, 3A DC/DC μModule Regulator EN55022 Class B Noise Compliant, Operates from 3.6V to 36V Input
Key Features:
Complete Step-Down Switch Mode Power Supply Wide Input Voltage Range: 3.6V to 36V 3A Output Current 0.8V to 24V Output Voltage EN55022 Class B Compliant Current Share Multiple LTM8033 Regulators for More Than 3A Output Selectable Switching Frequency: 200kHz to 2.4MHz Current Mode Control (e4) RoHS Compliant Package with Gold Pad Finish Programmable Soft-Start Compact Package (11.25mm × 15mm × 4.32mm) Surface Mount LGA
Applications:
Automotive Battery Regulation
Power for Portable Products
Distributed Supply Regulation
Industrial Supplies
Wall Transformer Regulation
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Ultralow Noise 12V/3A DC/DC µModule Regulator EMI Performance
8033 TA01a
VIN
RUN/SS
FIN
SHARE
VIN*20V TO 36V
VOUT12V3A
VOUT
AUX
BIAS
PGOOD
RT
LTM8033
2.2µF
SYNC GND ADJ
1µF
f = 850kHz
41.2k 34.8k
47µF
* RUNNING VOLTAGE RANGE. PLEASE REFER TO THE APPLICATIONS INFORMATION SECTION FOR START-UP DETAILS.
FREQUENCY (MHz)
8.41803716.7
618.6520.5
226.2324.3
422.40
10
30
20
60
50
40
70
80
912.91010
8033 TA01b
128.1
Po
we
r Ma
na
ge
me
nt
7
Key Features:
Complete Standalone Power Supply Wide Input Voltage Range: 4.5V to 26.5V 6A DC Typical, 8A Peak Output Current 0.8V to 5V Output Output Voltage Tracking ±1.75% Maximum Total DC Error Current Mode Control/Fast Transient Response Phase-Lockable Fixed Frequency 250kHz to 780kHz On-Board Frequency Synchronization Selectable Burst Mode® Operation Power Good Voltage Indicator Output Overvoltage Protection Output Current Foldback Limiting 9mm × 15mm × 4.32mm LGA Package
Applications:
Automotive Battery Regulation
Power for Portable Products
Distributed Supply Regulation
Industrial Supplies
Wall Transformer Regulation
Applications:
Telecom and Networking Equipment
Servers
Storage Cards
ATCA Cards
Industrial Equipment
Point of Load Regulation
Medical Systems
The LTM®4618 is a complete 6A output switching mode DC/DC power supply in a 9mm × 15mm × 4.32mm LGA package. Included in the package are the switching controller, power FETs, inductor and all support components. Operating over an input voltage range of 4.5V to 26.5V, the LTM4618 supports an output voltage range of 0.8V to 5V set by a single external resistor. Its high effi ciency design delivers 6A continuous current (8A peak). Only a few input and output capacitors are needed.
High switching frequency and a current mode architecture enable a very fast transient response to line and load changes without sacrifi cing stability. The device supports frequency synchronization and output voltage tracking for supply rail sequencing. Burst Mode operation or pulseskipping mode can be selected for light load operations.
Fault protection features include overvoltage protection, overcurrent protection and foldback current limit for short-circuit protection. The LTM4618 is Pb-free and RoHS compliant.
LTM4618 — 6A DC/DC μModule Regulator with TrackingPhase-Lockable Frequency Synchronization in 135mm2 Footprint
2.5V/6A DC/DC Power µModule® with 6V to 26.5V Input Effi ciency and Power Loss vs Load Current
LOAD CURRENT (A)0
EFFI
CIEN
CY (%
)
POWER LOSS (W
)
95
90
80
85
75
70
3.0
2.5
1.5
2.0
1.0
0
0.5
42 63 51
POWER LOSS
EFFICIENCY
12VIN TO 2.5VOUT24VIN TO 2.5VOUT
VIN
COMP
TK/SS
RUN
FREQ
VOUT
VFB
PGOOD
INTVCC EXTVCCMODE/PLLIN
LTM4618
SGND PGND28.7k
COUT
VOUT2.5V/6A
0.1µF
CIN
VIN6V to 26.5V
2.5V/6A DC/DC Power µModule® with 6V to 26.5V Input Effi ciency and Power Loss vs Load Current
LOAD CURRENT (A)0
EFFI
CIEN
CY (%
)
POWER LOSS (W
)
95
90
80
85
75
70
3.0
2.5
1.5
2.0
1.0
0
0.5
42 63 51
POWER LOSS
EFFICIENCY
12VIN TO 2.5VOUT24VIN TO 2.5VOUT
VIN
COMP
TK/SS
RUN
FREQ
VOUT
VFB
PGOOD
INTVCC EXTVCCMODE/PLLIN
LTM4618
SGND PGND28.7k
COUT
VOUT2.5V/6A
0.1µF
CIN
VIN6V to 26.5V
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
8
Pro
gra
mm
ab
le L
og
ic
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Lattice ispMACH 4000ZE FamilyUltra-low Power – Small Package – Priced Right
The ispMACH 4000ZE family is ideal for ultra-low power, high-
volume portable applications. The ispMACH 4000ZE offers standby
current as low as 10μA typical. The cost-optimized and feature-rich
ispMACH 4000ZE devices offer ultra-small space-saving ucBGA and
csBGA packages, a new Power Guard feature that enables ultra-low
system power and new system integration capabilities including an
on-chip user oscillator and timer. Built on proven E2CMOS® process
technology, ispMACH 4000ZE devices utilize a 1.8V core voltage
and support a wide range of 3.3V, 2.5V and 1.8V I/O standards. Plus,
ispMACH 4000ZE devices feature 5V tolerant I/Os when using the
LVCMOS 3.3, LVTTL, and PCI interfaces.
Key Features and Benefits:
Ultra Low Power Standby current as low as 10μA typical
1.8V core for low dynamic power
Operates down to 1.6V VCC
Per pin pull-up, pull-down or bus-keeper control
Power Guard with multiple enable signals
Ultra Small Footprint Space-saving packaging as small as 4x4mm (64-ball ucBGA)
Easy System Integration Operation with 3.3V, 2.5V, 1.8V or 1.5V LVCMOS I/O
5V tolerant I/O for LVCMOS 3.3, LVTTL, and PCI interfaces
Hot-socketing support
Open-drain output option
Programmable output slew rate
3.3V PCI compatible
I/O pins with fast setup path
Input hysteresis
IEEE 1149.1 boundary scan testable
IEEE 1532 ISC compliant
On-chip user oscillator and timer
High Performance 4.4ns tPD pin-to-pin delay
260MHz system performance
Broad Device Offering 32 to 256 macrocells
Multiple temperature range support
Commercial: 0 to 90°C junction (TJ)
Industrial: -40 to 105°C junction (TJ)
Eco-Friendly Materials Lead-free RoHS compliant packages
Halogen-free material content
Pro
gra
mm
ab
le L
og
ic
The MachXO family of non-volatile infinitely reconfigurable Programmable Logic
Devices (PLDs) is designed for applications traditionally implemented using
CPLDs or low-density FPGAs. Widely adopted in applications that require general
purpose I/O expansion, interface bridging and power-up management functions,
MachXO PLDs offer the benefits of increased system integration by providing
embedded memory, built-in PLLs, high performance LVDS I/O, remote field
upgrade (TransFRTM technology) and a low power sleep mode, all in a single-
device. Designed for a wide range of low density applications including system
control designs, the MachXO PLD family is used in a variety of end markets
including consumer, automotive, communications, computing, industrial and
medical.
9
Lattice MachXO Family The most versatile, non-volatile PLD
Key Features and Benefits:
Non-Volatile, Infinitely Reconfigurable Instant-on, powers up in less than 1mS
Single-chip, no ext. configuration memory
Excellent design security, no bitstream to intercept
Performance to 3.5ns Pin-to-Pin
TransFR Technology Allows Simple Field Upgrades
Flexible LUT Architecture 256 to 2280 LUT4s
73 to 271 I/Os with extensive package options
Density migration supported
Embedded and Distributed Memory Up to 27.6 Kbits sysMEM™ Embedded Block RAM
Includes dedicated FIFO control logic
Up to 7.7 Kbits distributed RAM
Flexible I/O Buffer Programmable sysIO™ buffer supports wide range of interfaces:
• LVCMOS 3.3/2.5/1.8/1.5/1.2
• LVTTL
• PCI*
• LVDS*, Bus-LVDS*, LVPECL*, RSDS*
sysCLOCK™ PLLs Up to two analog PLLs per device
Clock multiply, divide and phase shifting
Sleep Mode Reduces Standby Power to <100μA
System-Level Support IEEE Standard 1149.1 Boundary Scan
On-board 20MHz oscillator for configuration and user logic
Devices operate with 3.3V, 2.5V, 1.8V or 1.2V power supply
Broad Device Offering Commercial: 0 to 85ºC (TJCOM)
Industrial: -40 to 100ºC (TJIND)
AEC-Q100 qualified: -40 to 125ºC (TJAUTO)
* MachXO1200 and 2280 devices only.
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Device
LUTs (K)
DistributedRAM Bits (K)
EBR SRAMBits (K)
EBR SRAMBlocks
18x18Multipliers
sysDSP™ Blocks
flexiFLASH™Architecture
User I/Os
Chip Scale BGA(0.5 mm pitch)
TQFP
PQFP
Fine Pitch Thin BGA (1.00 mm pitch)
Fine Pitch BGA(1.00 mm pitch)
Lead-FreeSupport
PLLs
High-Speed I/Os
JTAG BoundaryScan Test
SPI Boot FlashInterface Support
I/O Voltage (V)
Latti
ceXP
2(1
.2V)
LFXP
2-5
510
166
912
3
86/1
00/1
46/1
7213
214
420
825
6—
2
3.
3/2.
5/1.
8/1.
5/1.
2
LFXP
2-8
818
221
1216
4
86/1
00/1
46/2
0113
214
420
825
6—
2
3.
3/2.
5/1.
8/1.
5/1.
2
LFXP
2-17
1735
276
1520
5
146/
201/
358
——
208
256
484
4
3.3/
2.5/
1.8/
1.5/
1.2
LFXP
2-30
2956
387
2128
7
201/
363/
472
——
—25
648
4/67
2
4
3.3/
2.5/
1.8/
1.5/
1.2
LFXP
2-40
4083
885
4832
8
363/
540
——
——
484/
672
4
3.
3/2.
5/1.
8/1.
5/1.
2
Device
LUTs
Distributed RAMBits (K)
EBR SRAMBits (K)
EBR SRAMBlocks
Macrocells1
User I/Os
TQFP
Chip Scale BGA(0.5 mm pitch)
Fine Pitch Thin BGA(1.00 mm pitch))
Lead-Free Support
PLLs
ISP Programming
JTAG BoundaryScan Test
I/O Voltage (V)
Mac
hXO-
C/E
(C=
1.8/
2.5/
3.3V
,E=
1.2V
)
LCM
XO25
6C/E
256
2—
—12
878
/78
100
100
—
—JT
AG
3.3/
2.5/
1.8/
1.5/
1.2
LCM
XO64
0C/E
640
6.1
——
320
74/1
32/7
4/10
1/15
910
0/14
410
0/13
225
6
—JT
AG
3.3/
2.5/
1.8/
1.5/
1.2
LCM
XO12
00C/
E12
006.
49.
21
600
73/1
33/1
01/2
1110
0/14
413
225
6
1JT
AG
3.3/
2.5/
1.8/
1.5/
1.2
LCM
XO22
80C/
E22
807.
727
.63
1140
73/1
13/1
01/2
11/2
7110
0/14
413
225
6/32
4
2JT
AG
3.3/
2.5/
1.8/
1.5/
1.2
Device
LUTs (K)
Distributed RAM Bits (K)
EBR SRAMBits (K)
EBR SRAMBlocks
sysDSP Blocks
18x18 Multipliers
SERDES Channels
User I/Os
TQFP
PQFP
Fine Pitch BGA(1.00 mm Pitch)
Lead-FreeSupport
GPLL + SPLL + DLL1
High-Speed I/Os
JTAG BoundaryScan Test
SPI Boot FlashInterface Support
I/O Voltage (V)
Latti
ceEC
P3(1
.2V)
LFE3
-17E
1736
552
306
244
133/
222
——
256/
484
2+
2
3.3/
2.5/
1.8/
1.5/
1.2
LFE3
-35E
3368
1327
7216
644
133/
295/
310
——
256/
484/
672
4+
2
3.3/
2.5/
1.8/
1.5/
1.2
LFE3
-70E
6714
544
2024
032
128
4/8/
1229
5/38
0/49
0—
—48
4/67
2/11
56
10+
2
3.3/
2.5/
1.8/
1.5/
1.2
LFE3
-95E
9218
844
2024
032
128
4/8/
1229
5/38
0/49
0—
—48
4/67
2/11
56
10+
2
3.3/
2.5/
1.8/
1.5/
1.2
LFE3
-150
E14
930
368
5037
280
320
8/16
380/
586
——
672/
1156
10
+2
3.
3/2.
5/1.
8/1.
5/1.
2
Prog
ram
mab
le P
rodu
cts
- Lat
tice
Latti
ceEC
P3 ™
FPG
A Pr
oduc
ts
Latti
ceXP
2 ™
FPG
A Pr
oduc
ts
Mac
hXO
™ P
LD P
rodu
cts
1. G
PLL
+ D
LL fo
r Lat
ticeE
CP3
Device
LUTs
Distributed RAMBits (K)
EBR SRAMBits (K)
EBR SRAMBlocks
Macrocells1
User I/Os
TQFP
Chip Scale BGA(0.5 mm pitch)
Fine Pitch Thin BGA(1.00 mm pitch))
Lead-Free Support
PLLs
ISP Programming
JTAG BoundaryScan Test
I/O Voltage (V)
Mac
hXO-
C/E
(C=
1.8/
2.5/
3.3V
,E=
1.2V
)
LCM
XO25
6C/E
256
2—
—12
878
/78
100
100
—
—JT
AG
3.3/
2.5/
1.8/
1.5/
1.2
LCM
XO64
0C/E
640
6.1
——
320
74/1
32/7
4/10
1/15
910
0/14
410
0/13
225
6
—JT
AG
3.3/
2.5/
1.8/
1.5/
1.2
LCM
XO12
00C/
E12
006.
49.
21
600
73/1
33/1
01/2
1110
0/14
413
225
6
1JT
AG
3.3/
2.5/
1.8/
1.5/
1.2
LCM
XO22
80C/
E22
807.
727
.63
1140
73/1
13/1
01/2
11/2
7110
0/14
413
225
6/32
4
2JT
AG
3.3/
2.5/
1.8/
1.5/
1.2
Device
Macrocells
Registers
I/O + Dedicated Inputs
16-Bit CounterSpeed (fMAX in MHz)
Pin-to-Pin Speed(tPD in ns)
PLCC
QFNS
TQFP
Ultra Chip Scale BGA(0.4 mm pitch)
Chip Scale BGA(0.5 mm pitch)
Fine Pitch Thin BGA(1.00 mm pitch)
Lead-Free Support
Same PackageMigration Path
ISP Programming
JTAG Boundary Scan Test
IEEE 1532 Port
sysCLOCK™ PLLs
sysIO™ Interfaces
I/O Slew Rate Control
Input Register Capability
Bus Hold Latches
Supply Voltage (V)
I/O Voltage (V)
ispM
ACH
4000
ZEZe
ro P
ower
(1.8
V)
LC40
32ZE
3232
32+
426
0, 2
001 ,
1721
4.4,
5.8
1 , 7.
51—
—48
—64
—
2LC
4064
ZEJT
AG
—
—
1.8
5/3.
3/2.
5/1.
8/1.
5
LC40
64ZE
6464
32+
4/48
+4/
64+
1024
1, 2
001 ,
1721
4.7,
5.8
1 , 7.
51—
—48
/100
6464
/144
—
2LC
4128
ZEJT
AG
—
—
1.8
5/3.
3/2.
5/1.
8/1.
5
LC41
28ZE
128
128
64+
10/9
6+4
200,
172
15.
8, 7
.51
——
100/
144
132
144
—
2LC
4256
ZEJT
AG
—
—
1.8
5/3.
3/2.
5/1.
8/1.
5
LC42
56ZE
256
256
64+
10/9
6+14
/108
+4
200,
172
15.
8, 7
.51
——
100/
144
—14
4—
2
—JT
AG
—
—
1.8
5/3.
3/2.
5/1.
8/1.
5
Device
Monitoring Precision
ProgrammableSense Inputs
Measurement ADC
I2C Support
SupervisoryOutputs
FET Drivers/ Digital Outputs
Programmable Timers
CPLDMacrocells
Power SupplyVoltages
TQFP
QFNS
Lead-Free Support
Commercial Temp. Grade
Industrial Temp. Grade
Automotive Temp. Range
ispP
AC P
ower
Man
ager
ispP
AC-P
OWR1
220A
T80.
2%12
(0.7
V to
5.9
V) +
PW
R-of
f Det
ect
164
448
2.8V
to 3
.9V
100
—
.
—
ispP
AC-P
OWR1
014
0.3%
10 (0
.7V
to 5
.9V)
+ P
WR-
off D
etec
t—
—12
24
242.
8V to
3.9
V48
—
ispP
AC-P
OWR1
014A
0.3%
12 (0
.7V
to 5
.9V)
+ P
WR-
off D
etec
t
12
24
242.
8V to
3.9
V48
—
ispP
AC-P
OWR1
208P
10.
5%12
(0.7
V to
5.9
V) +
PW
R-of
f Det
ect
——
44
416
2.7V
to 5
.5V
44—
—
ispP
AC-P
OWR1
208
0.9%
12 (1
V to
5.7
V)—
—4
44
162.
25V
to 5
.5V
44—
ispP
AC-P
OWR6
040.
9%6
(1V
to 5
.7V)
——
4—
28
2.25
V to
5.5
V44
—
ispP
AC-P
OWR6
070.
5%6
(0.7
V to
5.9
V) +
PW
R-of
f Det
ect
——
5 I/O
24
162.
65 to
3.9
V—
—
—
ispP
AC-P
OWR6
AT6
0.2%
—
—
——
—2.
8V to
3.9
V—
32
—
Device
ProgrammableReferenceInputs
ProgrammableClock Outputs
ProgrammableSkew Steps
Output ClockDividers
Input Dividers
Feedback Dividers
Power Supply Voltage
TQFP
QFNS
Lead-Free Support
CommercialTemp. Grade
IndustrialTemp. Grade
ispC
lock
ispC
lock
5610
A1
(8 to
400
MHz
)10
(4 to
400
MHz
)16
(156
ps)
5 (2
:80)
1 (1
:40)
1 (1
:40)
3.3V
48—
ispC
lock
5620
A2
(8 to
400
MHz
)20
(4 to
400
MHz
)16
(156
ps)
5 (2
:80)
1 (1
:40)
1 (1
:40)
3.3V
100
—
ispC
lock
5406
D2
(50
to 4
00M
Hz)
6 (5
0 to
400
MHz
)16
(156
ps)
4 (2
, 4, 8
, 16)
——
3.3V
—48
ispC
lock
5410
D2
(50
to 4
00M
Hz)
10 (5
0 to
400
MHz
)16
(156
ps)
4 (2
, 4, 8
, 16)
——
3.3V
—64
ispC
lock
5304
2 (8
to 2
67M
Hz)
4 (4
to 2
67 M
Hz)
8 (1
56ps
)3
(1, 2
, 4, 8
, 16,
32)
——
3.3V
48—
ispC
lock
5308
2 (8
to 2
67M
Hz)
8 (4
to 2
67 M
Hz)
8 (1
56ps
) 3
(1, 2
, 4, 8
, 16,
32)
——
3.3V
48—
ispC
lock
5312
2 (8
to 2
67M
Hz)
12 (4
to 2
67 M
Hz)
8 (1
56ps
)3
(1, 2
, 4, 8
, 16,
32)
——
3.3V
48—
ispC
lock
5316
2 (8
to 2
67M
Hz)
16 (4
to 2
67 M
Hz)
8 (1
56ps
) 3
(1, 2
, 4, 8
, 16,
32)
——
3.3V
64—
ispC
lock
5320
2 (8
to 2
67M
Hz)
20 (4
to 2
67 M
Hz)
8 (1
56ps
)3
(1, 2
, 4, 8
, 16,
32)
——
3.3V
64—
ispM
ACH™
Pro
duct
s
ispP
AC® P
ower
Man
ager
Mix
ed-S
igna
l PLD
Pro
duct
s
ispC
lock
™ In
-Sys
tem
Pro
gram
mab
le C
lock
Gen
erat
or a
nd D
istr
ibut
ion
Prod
ucts
1. A
vaila
ble
in in
dust
rial g
rade
. 2
. Lea
d-fr
ee p
acka
ge o
ptio
ns o
nly.
12
Se
ns
ors
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
ST offers a complete portfolio of single-, dual- and tri-axis gyroscopes covering a wide full-scale range
(from 30 to 6000 dps) in small LGA packages. The innovatively designed sensors can provide either two
separate analog outputs for each axis at the same time – an unamplified output and a 4x amplification to
enhance design flexibility and the user experience, or the advantages of both SPI and I²C digital interfaces.
Embedded power-down mode enables very low power consumption that, combined with the innovative
sleep mode, guarantees fast turn-on time for efficient power cycling.
New Generation of MEMS Gyroscopes
Key Features:
Single-axis (yaw), two-axis (pitch and roll, pitch and yaw) and three- axis (pitch, roll and yaw) gyroscopes Complete range of full scales available (30 to 6000 dps) Ultra stable over temperature Low noise level: 0.01 dps/√Hz Amplified and unamplified analog outputs concurrently available I²C, SPI digital interfaces Extended power supply range: 2.7 to 3.6 V Absolute angular rate output Integrated low-pass and high-pass filters Embedded self test Power-down and sleep mode High shock survivability
Applications:
Gaming
Image stabilization in cameras and camcorders
Pointing devices and motion controller for smart user interfaces
Enhanced GPS solutions (dead reckoning algorithm implementation)
Motion control in robotics
Platform stabilization for industrial machinery
Digi m10™ Compact Satellite ModemAn extremely compact module for use on the ORBCOMM low-earth orbit (LEO) satellite network, with very low transmit and receive power consumption
The Digi m10 satellite module provides worldwide satellite data connectivity for a wide variety of asset-tracking and industrial remote communication applications. Operating on the ORBCOMM low-earth orbit (LEO) satellite network, it is designed to enable cost-efficient Machine-to-Machine (M2M) communication with virtually unlimited global coverage and no blockage. All at a typical low monthly cost comparable to cellular plans for low data volume M2M applications.
Built on Digi’s own patented mixed signal chip designed and tailored for satellite applications, the Digi m10 modem offers immediate product design integration through its integrated serial interface. With full support for industrial temperature and operational shock/vibration specifications exceeding SAE J1455, it is the ideal choice for reliable and highly cost-efficient satellite connectivity in even the most demanding application.
The Digi m10 kits provide all necessary components for quick and easy product evaluation, development and prototyping.
Wire
les
s
Benefits:
Quick and simple product design integration Through the integrated serial interface, connect to a wide variety of sensors Low monthly cost for global satellite coverage compared to cellular plans for low data volume M2M applications Cost efficient with leading performance Through the integrated serial interface, connect to a wide variety of sensors
Applications:
Asset-tracking
Industrial remote communications
Security
Tank monitoring
Transportation
Utilities
13
Key Features:
Simple serial interface for host communication Global LEO satellite coverage (no blockage) Extremely compact module form factor Very low transmit and receive power consumption Industrial operating temperature
Highly shock and vibration resistant
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
14
Wir
ele
ss
The nRF24LE1 is a unique solution offering a complete ultra low power (ULP) wireless system-on-chip (SoC) solution. It integrates the industry best nRF24L01+ 2.4GHz transceiver core, an enhanced 8051 microcontroller, flash memory and a wide range of analog and digital peripherals. The 8-bit microcontroller is powerful enough to run both the RF protocol stack and the application layer, enabling a true single chip implementation of ULP wireless applications.
Optimized for ultra low power wireless - Advanced power management and on-chip peripheralsThe nRF24LE1 is optimized to provide a single chip solution for ULP wireless applications. The combination of processing power, memory, low power oscillators, real-time counter, AES encryption accelerator, random generator, plus a range of power saving modes provides an ideal platform for implementation of RF Protocols. Benefits include tighter protocol timing, security, lower power consumption and improved co-existence performance. For the application layer the nRF24LE1 offers a rich set of peripherals including: SPI, 2-wire, UART, 6 to 12-bit ADC, PWM, and an ultra low power analog comparator for voltage level system wake-up.
Three package sizes for different applications - Same core but different package and I/O countThe nRF24LE1 comes in three different package variants: An ultra compact 4x4mm 24-pin QFN (7 generic I/O pins) A compact 5x5mm 32-pin QFN (15 generic I/O pins) A 7x7mm 48-pin QFN (31 generic I/O pins)
The 4x4mm 24-pin QFN with 7 generic I/O pins is ideal for low I/O count applications where small size is key. Examples include wearable sports sensors and watches. The 5x5mm 32-pin QFN with 15 generic I/O pins is ideal for medium I/O count applications such as wireless mice, remote controls and toys. The 7x7mm 48-pin QFN with 31 generic I/O pins is for high I/O count products like wireless keyboards.
nRF24LE1 — a Complete Ultra Low PowerWireless System-On-Chip SolutionAdvanced power management and on-chip peripherals
Applications
PC peripherals – mice, keyboards and remotes Gaming controllers RF remote controls for consumer electronics devices such as set-top boxes, media players and TVs Sports and healthcare sensors Sport watches, bike computers, and gym equipment Remote controlled toys Active RFID
Key Features:
Fully featured ultra low power nRF24L01+ 2.4GHz transceiver core Worldwide 2.4GHz ISM band operation Enhanced ShockBurstTM hardware link layer 250 kbps, 1 Mbps and 2 Mbps on-air data rate options Air compatible with nRF24L01; nRF24L01+; nRF24LU1, and nRF2401A, -02, -E1 and -E2 Low cost external+/-60ppm 16MHz crystal Enhanced 8-bit 8051 compatible microcontroller 32-bit multiplication-division unit AES encryption/decryption accelerator 16 kbytes on-chip flash memory 1 kbyte on-chip data flash memory 512 bytes high-endurance data flash memory 1 kbyte on SRAM plus 256 bytes of IRAM Low power 16MHz crystal and RC oscillators Ultra low power 32kHz crystal and RC oscillators Flexible real-time counter and three 16-bit timers/counters Ultra low power analog comparator for system wake-up Rich set of digital interfaces including: SPI master/slave, 2-wire master/ slave, and UART 2-channel PWM Programmable resolution ADC: 6, 8, 10, or 12-bits Random Number Generator based on thermal noise Supports the Nordic nRFProbe hardware debugger Programmable generic I/O pins Three package options: 4x4mm 24-pin QFN (7 Generic I/O pins) 5x5mm 32-pin QFN (15 Generic I/O pins) 7x7mm 48-pin QFN (31 Generic I/O pins)
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
15
Wire
les
s
nRF24LU1 — Single chip 2.4GHz Transceiver with USB, Microcontroller and Flash MemoryA unique single chip solution for compact USB donglesfor wireless peripheralsThe nRF24LU1 integrates a nRF24L01 compatible 2.4GHz RF transceiver, a full speed USB 2.0
compliant device controller, a 8-bit microcontroller and 16 kbytes of flash memory. With an internal
voltage regulator that enables the chip to be powered directly from the USB bus, it does not require
an external voltage regulator, saving cost and board space. With a fully integrated RF synthesizer
and PLL for the USB no external loop filters, resonators or VCO varactor diodes is requires, only a
low cost ±60ppm 16MHz crystal, matching circuitry and the antenna.
Benefits:
Enables implementation of compact USB dongle for wireless peripherals
A low cost solution is enabled by high level of integration with a minimum number of low cost external components
Power directly from USB power removing the need for external voltage regulator
Complete development platform for reduced development cycles and risk
Production ready USB dongle reference design for fast time-to market
Applications:
Compact USB dongles for wireless peripherals
USB dongles for Mouse, keyboards and remotes
USB dongle 3-in-one desktop bundles
USB dongle for advanced Media center remote controls
USB dongle for Game controllers
Toys
Key Features:
nRF24L01 compatible RF transceiver Worldwide 2.4GHz ISM band operation Up to 2Mbps on air data rate Enhanced ShockBurst™ hardware link layer Air compatible with nRF24L01, nRF2401A, 02, E1 and E2 Low cost external ±60ppm 16MHz crystal Full speed USB 2.0 compliant device controller Up to 12 Mbps USB transfer rate 2 control, 10 bulk/interrupt and 2 ISO endpoints Dedicated 512 bytes endpoint buffer RAM Software controlled pull-up resistor for D+ PLL for full-speed USB operation Voltage regulator, 4.0 to 5.25V supply range
Enhanced 8-bit 8051 compatible microcontroller Reduced instruction cycle time 32-bit multiplication-division unit 16 kbytes of on-chip flash memory 2 kbytes on SRAM 6 general purpose digital input/output pins Hardware SPI slave and master, UART 3 16-bit timers/counters AES encryption/decryption co-processor Supports firmware upgrade over USB Supports FS2 hardware debugger Compact 32-pin 5x5mm QFN package
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Nu
Ho
rizo
ns L
ine
Car
d
• Military Discretes (Switching Diodes - JAN, JANTX, JANTXV)
• Audio (DAC’s, ADC’s, Codec’s, SPDIF, Sample Rate Conv., DSP, USB) • Memory (EEPROM, DAC + EEPROM) • Networking (T1/E1/T3/E3 xcvr, PCM) • Sensors (Hall Effect Sensor, 3d Compass) • Video (NTSC/PAL Encoder/Decoder, A/V Switches, Video Gain Amp)
• Discrete (Transistors, FET arrays, Thyristors, Triacs) • Display (Vacuum – Fluorescent Display Drivers) • LED Drivers (Constant Current Drivers) • Motor Control (Brushless DC, Bi-Polar Stepper) • Power (Linear Regulators, Buck/Boost/Fly back DC- DC, Charge Pumps) • Sensors (Hall Effect)
• Analog (Data Conversion, Power Management) • Communications (Bluetooth, LIN, CAN, POTS, GPS, RF, Zigbee) • Memory (Flash, EEPROM, Modules) • Microcontrollers (8051, AVR, ARM7TDMI, ARM926EJ, Cortex M3) • Multimedia & Imaging (IR, Video) • Network Storage (Data Storage) • Programmable Logic (FPGA, SPLD/CPLD) • Sensors (Biometrics, RF, Smart Cards)
• Fiber Optic Devices (10G FP TOSA & MM PIN ROSA, OTDR FP Lasers, 2.5G DWDM DML, DFB TOSA & APD ROSA) • Optocouplers (Transistor Output, High Speed, Solid State Relays) • RF Modules (Zigbee) • RF Semiconductors (RFIC Switch, GaAs FET, GaAs PA, Si LD-MOSFET, CATV Hybrid, Si RFIC)
• Embedded Array ( 0.13µ - 0.5µ / 6K – 10.7M Gates / 50 – 300 MHz) • IP Repository ( ARM926EJ, 8051, USB, PCIE, DDR2, 10/100 MAC, Mil-STD-1553, UART, DMA, Timer, GPIO) • Standard Cell ( 0.13µ - 0.25µ / 5M – 12M Gates / 150 – 333 MHz) • Structured ASIC ( 0.13µ - 0.35µ / 21K – 1.7M Gates / 50 – 250 MHz)
• Power and Battery Management (IGBT and MOSFET gate drivers) • Sensor and Imaging Arrays (Hall Effect Sensors) • Signal Conditioning (Solid State Relays, Optocouplers) • Telecom (Embedded Modem, MF Trunk signaling, DTMF)
• Imaging Solutions (Fax Modems, Fax and MFP System Solutions, Digital Photo Frames) • Audio (Speakers-on-a-Chip, PC HD-Audio, PC HD- Audio Modem Combo) • Video (MPEG Encoders/Codecs, Video Decoders, Demodulators, Surveillance / Security) • Dial-Up Access Modems (PC Dial-Up Modems, Embedded Dial-Up Modems)
• Wireless (Bluetooth modules, ZigBee modules, 802.11 modules)
• Device Server Modules • Embedded MCU / MPU (ARM7TDMI, ARM9926EJ) • Networking Modules (Wired/Wireless 802.3 / 802.11bg / 802.15.4)
• Data Converters (ADC, DAC) • Interface (PLB / PCI / I2C / SPI / USB UARTs, RS232/485/422 Transceivers) • Power (Buck/Boost Regulator’s, Charge Pumps, LDO’s, Supervisors, PWM, Programmable Power) • Storage (Data Reduction, Data Security) • Telecom (T1/E1/DS1/DS3/E3 LIU’s, Carrier ETH SONET/SDH Framers, Mappers & Aggregators)
(Fiber Optics Division) • Optical Components (WDM Management, 850nm VCSELs & Detectors, 1310nm Lasers & Detectors, CML Transmitters,WSS) • Optical Transceivers (GBIC, XFP, MSA300, SFP, SFP+) • Passive Optics (WDM networks)
• Audio (Embedded/De-Embed) • Datacom (CDRs, Laser Drivers, TIAs, Limiting Amps, ROSA, PCIe Retimers/Redrivers/Bridges, Optical Modules (SFP), Backplane SerDes) • Video (CDRs, Laser Drivers, TIAs, Limiting Amps, ROSA, PCIe Retimers/Redrivers/Bridges, Optical Modules (SFP), Backplane SerDes)
• Memory (QDR/DDR SRAM, Zero-Wait SRAM (NBT), Sync Burst SRAM, Specialty Sync-SRAM)
• Wireless (802.11 modules)
• Memory (DDR DRAM,SDRAM, EDO & FPO DRAM, E2PROM, PSRAM, SRAM, DDR II Synchronous SRAM, Asynchronous SRAM) • Smart Card (Two-Wire Serial EEPROM, Secure, MCU Based, ICs)
• Power (MOSFET, IGBT, Diodes, Thyristors, DC/DC, PWM Control, LED/Lamp/Display Drivers) • RF Power (FETs, Drivers, Amplifiers, Microwave modules, RF Modules) • Solar Devices (Solar Cells, Solar Bits, Solar Die, Solar Battery Chargers)
• Programmable Clock Devices (Clock Generation, Differential Clock Distribution, Universal Fanout & Zero Delay Buffer, Clock Synthesis, Low Jitter SERDES Clock) • Programmable Power Manager Devices (for Processors, DSPs & Board Level; Watchdog timer, Voltage Supervision, Reset Generation, Sequencing, Voltage Measurement, Trimming & Marginning) • Programmable Logic (Non-Volatile Flash FPGA, SRAM FPGA, SERDES, 8/32 Bit Soft Processor, Ultra-Low Power CPLD, SPLD)
• Data Converters (Delta Sigma, SAR, Voltage DAC, Current DAC) • Frequency Control (Silicon Timing) • Interface (RS-232, 422/485, CAN PHY) • Power Management (Switching Regulators, Linear Regulators, DC/DC µModules, LED Drivers, Hot Swap, PoE) • Signal Conditioning (Amplifiers, Comparators, Filters, Voltage References, Thermal Couple Compensators) • Wireless / RF (I/Q Modulators – Demodulators, Up & Down Converting Mixers, IF Amplifiers, PA, RF Log Detectors, RF Power Detector)
• Data Communications (10/100/1G/10G Ethernet Switches, 10/100/1000/10G PHYs) • Embedded MCU / MPU (ARM V5TE, PXA StrongARM, PPC & MIPS Systems Controller) • Power Management (POLA) • Storage (FAS/SATA/PATA, SAS/Fiberchannel, Storage Processors) • Video (Format Converter) • Wireless / RF (802.11 Modules)
• Analog (Drivers / Voltage & uC Supervisors / Filters / Switches / Regulators) • Bus Device ICs (USB / PC / PCMCIA / SMBus) • Ethernet (10/100/1000 PHYs, Controllers, Switches) • Linear ICs (Active Filters / Comparators / Op Amps / References / Timers) • Power Management ICs (Battery, Display, Hot- Swap, PCI/PCIX/PCIE, High Side, LDOs, DDR) • Precision Edge ICs (Clock distribution, generation, synthesizers / Multiplexers, PLLs, buffers, CDRs) • RF (290 – 980 ISM band / ASK/FSK / 200kbps max data rate, RF Modules) • System Management ICs (Fan Control / Thermal Supervisor I2C)
• DRAM (DDR3 SDRAM, DDR2 SDRAM, DDR SDRAM, SDRAM, RLDRAM, PSRAM) • DRAM Modules (FBDIMM, RDIMM, SODIMM, UDIMM) • Mobil DRAM (Mobil SDRAM, Mobil DDR SDRAM) • Multichip Packages (MobilDRAM & NAND Flash Combinations) • NAND Flash Memory (Managed NAND, High Speed NAND, Solid State Storage, Embedded USB)
16
Nu
Ho
rizon
s Lin
e C
ard
(Formerly C&D Technologies) • AC/DC Power Supplies (200 – 2000 Watts, 2.5VDC to 48 VDC Out – PCI Modules) • Data Acquisition (Electronic Imaging, A/D Converters, D/A Converters, Sample/Hold Amplifier, Multiplexers) • DC/DC Converters (0.25 to 340 Watts, 0.02 to 80 Amps, 1.2 to 48 VDC Out; 3 to 75 VDC In) • Digital Panel Meters (Voltmeters, Wire Meters, Process Monitors, AC/DC Ammeters) • Magnetics (Inductors & Transformers, Differential common-mode filters, Databus Isolators)
• AC-DC Power Supplies (125W-375W, 3.3vdo to 56vdo, 90-264vao in, 3”, 3.3” x 5” format) • DC-DC Open Frame Power Supplies (125W, 160W, 3.3-48vdo 3” X 5” format) • Power Systems Engineering Services
• Wireless/RF (2.4G / 900M / 433M Transceiver, MCU based RF, Audio streaming)
• Communications (Voice & Audio CODECs, Pro-X SLICs, USB Audio Codec) • Logic ICs (I/O Controllers, ISA Bridge, Power Management, Hardware Monitors, Clock Generators, Power I/C, Card Reader IC’s, IEEE1394) • MPU (8-bit 80C51 based, 32-bit ARM7TDMI) • Power (ACPI Controller, PWM, DDR Bus Term, Power Switch) • Voice Solutions (Record & Playback ICs)
(Rohm Semiconductor is the official sales channel for Oki Semiconductor products) • Audio (CODECs, DACs, Amplifiers ) • Display Drivers (LCD / VFD Driver / Controllers) • Embedded MCU / MPU (4-Bit NX 63K / ARM7TDMI / ARM946E / Biometrics) • Memory (P2ROM, DRAM ) • Speech (BGM Mixer - ADPCM & ADPCM2, Voice Synthesizers & Recorders, Audio Codec) • Telecom (ADPCM – Linear – PCMA-Law - VoIP Codec’s, Echo Cancellers, Transceivers) • Video (NTSC / PAL / SECAM Encoders – Decoders, NR-FIFO)
• Analog Image Sensor (NTSC/PAL) • Digital Image Sensor (CIF, VGA, 1.3M / 2.0M / 3.2M / 5.17M Pixel) • Image Processors
(Including SaRonix)
• Analog Switches (3-17V SPDT-SPST-DPST-MUX, Custom HDMI/DVI-PCI-USB-LAN) • Bridges (PCI, PCIX, PCI Express – 32/64Bit – 66/133MHz) • Clock ICs ( VCXOs, Buffers, Drivers, Generators, Skew Controllers) • Crystals & Oscillators (Quartz Crystal Resonators) • Digital Switches (2-Port, Bus, Crossbar, DDR, Mux/DeMux, Low Voltage Translator) • Interface (Re-Drivers, Buffers, Flip-Flops, Gates, Latches, Registers, Transceivers, Voltage Translators) • Logic (ALVC, FCT, LCX, LPT) • PCI Express Solutions (Packet/Signal Switches, Bridge, PHY, Signal Conditioning, Clock-Buffers/ Generators/Crystals) • Translators (Voltage, I/O Signal)
• Optoelectronics (Optocouplers, LEDs)
• Frequency Control (Oscillators, Crystals, VCXO, TCXO, OCXO, Sine Wave Oscillator)
• Communications (CAN, LIN, ZigBee) • Discrete (Diodes, Power MOSFETS, Thyristors, Triacs, Transistors) • Embedded MCU / MPU (8/16/32 Bit MCUs) • Logic (Standard – High/Low Voltage, Interface, Multi-Purpose) • Memory (Fast Flash, Low Power SRAM, EEPROM)
®
• Frequency Control (Oscillators, Optical Timing Clocks, Sine Wave Oscillator) • RF Components (SAW Resonators, SAW RF & IF Filters, RFIC Transceivers) • RF Modules (ZigBee, 802.15.4, UHF Mesh, FHSS ISM, Bluetooth, 802.11b) • Standalone RF modules (FHSS, 802.15.4, 802.11b, and Bluetooth)
• Power (High Reliability Transistors)
• Flat Panel Displays (LCD – 2” to 65”) • Memory (Flash – NOR) • Optoelectronics (LEDs, LED Modules, Laser Diode, Photocoupler, IrDA, photo interrupters, Emitters/ Detectors, Sensors) • Power (LDO / Switching Regulators, LED Drivers, Solid State Relays)
• Digital Video Processors • Storage Products (Serial ATA - Parallel ATA, Parallel ATA Controller, RAID Storage Processors, SATA Controllers, SATA Port Multipliers) • Video Transport (HDMI, DVI and iTMDS Products - Receivers, Transmitters, Switches, PHYs)
• Controllers (Flash Memory Card Controller, USB Flash Controller) • Embedded Graphics (128-bit 2D/3D mobile graphics engine, Mobile Graphics Coprocessor) • Mobile Communication (Mobile Satellite TV Tuner IC) • Multimedia SoC (MP3/WMA Digital Audio Player, USB 2.0 Megapixal Image Controller)
• Advanced I/O Controllers (USB-ATA, Southbridge) • Data Communications (10/100 MAC/PHY Controller, 10/100PHY, Multimedia Processors, ArcNET, CircNET, USB Ethernet) • Environmental (Temperature Sensors, Fan Control) • USB Solutions (Card Reader, Flash Drive, Disk Drive, Hub, PHY)
• Power Management (AC/DC, Battery Management, DC/DC, LDO, MPU - Supervisor, PoE, VDC References, AC Switches) • Discretes (Thyristors, Diodes, FETs, Transistors) • Signal Conditioning (Comparators, Op-Amps, Clamp Diode Arrays, Crowbar Diodes, EMI Filtering) • Logic (3.3V, 5V, Translators, Gates, Switches, Port - Expansion) • Sensors (Accelerometers, Proximity, Thermal, Touch) • Interface (Smartcard) • Wireless (Bluetooth, ZigBee, GPS, RFID) • Audio (Decoders, Power Amps, Analog CPU, Digital CPU, Radio) • Image Sensor (Camera Modules, Imaging Signal Processor, CMOS Arrays) • Video (Demodulator, Decoders) • Motor Control (Controllers, Drivers, MCU’s) • Microcontrollers (8-bit, 16-bit, ARM7TDMI, ARM926E, Cortex M3)
• Optoelectronics (LED Drivers, EL Lamp Drivers) • Power (Switching, Automotive, PFC, Backlight, LDO, High Voltage Interface / Driver’s, PoE) • Transducers (Ultrasound)
• AC/DC Power Supplies (Industrial and Medical - 300W - 1500W) • DC/DC Converters - Industry Standard (1/8-Brick, 1/4-Brick, 1/2- Brick, Full Brick) - Non-Isolated Point of Load - Intermediate Bus Converters (1/8-Brick, 1/4- Brick, 1/2-Brick)
• Data Interconnect (Signal Conditioners and Retimers, Crosspoint Switches, Backplane, Switch Fabrics) • Ethernet (10/100/1G/10G PHYs, 10/100/1G/10G MACs, Switches, Transceivers) • Storage (FC, SerDes, Transceivers, SAS Controllers, SATA Controls) • Transport Physical Layer (TIAs, Amplifiers, Photodiodes, CDR, MUX, DEMUX, Transceivers, PON) • Transport Processing (VC, FEC, Network Processors, TSI, Pointer Processors)
• Memory (SDRAM / DDR1, Pseudo SRAM, Serial Flash, Parallel Flash)
• Filters • Inductors • Isolators • Transformers (Modem, Analog/Voice Switching, DSL, Cable Modem, RJ45, PoE)
17
Linear TechnologyMicrelSMSC
STVitesse
SYSTEM MONITORING
Clock DistributionExarLatticeMicrelPericomST
Clock GenerationAKM SemiconductorExarLatticeLinear TechnologyMicrelPericom / SaRonixPletronicsRFM
Crystals, Oscillators, Drivers, Buffers, PLLs
TIMING
A/D AKM SemiconductorExarLinear TechnologyMurata Power SolutionsNuvotonST
D/AAKM SemiconductorLinear TechnologyMurata Power SolutionsST
CONVERTERS8-BitAtmelISSILattice (soft processor)NordicNuvotonOki Renesas ST
16-BitRenesasST
32-BitAtmelDigiLattice (soft processor)MarvellNuvotonOki RenesasST
CENTRAL PROCESSOR
POWER & BATTERY MANAGEMENTBattery ManagementAllegro MicrosystemsLinear TechnologyMicrelST
DiscretesAeroflex Metelics (military)Allegro MicrosystemsIXYSMurata Power SolutionsRenesasSemicoaSTSupertexWurth Midcom
Hot SwapLatticeLinear TechnologyMicrelSupertex
Linear Regulators &ReferencesAllegro MicrosystemsAtmelExarLinear TechnologyMarvell (modules)MicrelOkiSharpSTSupertex
Motor ControlAllegro MicrosystemsST
POELinear TechnologySTSupertex
Power ManagementExarIXYSLatticeLinear TechnologyMarvellMicrelMurata Power SolutionsST
Power Modules Linear TechnologyMarvellMurata Power SolutionsSynQor
SwitchingAllegro MicrosystemsExarLinear TechnologyMarvellMicrelOki STSupertex
Allegro MicrosystemsAKM Semiconductor AtmelClareNuvoton Oki
OmnivisionSharpSMSCST
SENSORS AND IMAGING ARRAYS
DiscretesST
DriversMicrelSTSupertex
AmplifiersLinear TechnologyMicrelST
IsolationCELClarePericomSharpST
ComparatorsLinear TechnologyMicrelST
FiltersLinear TechnologyMicrelST
SIGNAL CONDITIONING
POWER SUPPLIESAC-DC Low Power Murata Power SolutionsN2Power
Medium Power Murata Power SolutionsN2PowerSynQor
Front End Murata Power Solutions
Medical SynQor
Power Systems Engineering ServicesMurata Power SolutionsN2PowerNu Horizons Value-Add
DC-DC Industrial Isolated / Industry Standard Bricks /Non-Isolated Point of LoadMurata Power SolutionsSynQor
Open FrameN2Power
Board Level ModulesIntermediate Bus ConvertersMurata Power SolutionsSynQor
Memory & Processor PowerMurata Power Solutions
InfraredQT CorporationSharp
LasersFinisar
LED DisplaysOptrexMurata Power Solutions
LED Arrays / ModulesSharp
LEDs / Laser DiodesQT Corporation Sharp
Optical SystemsCELFinisar
OptoCouplersCELQT Corporation Sharp
OPTOELECTRONICS
18
8-BitAtmelISSILattice (soft processor)NordicNuvotonOki Renesas ST
16-BitRenesasST
32-BitAtmelDigiLattice (soft processor)MarvellNuvotonOki RenesasST
CENTRAL PROCESSOR
ModemConexantST
VoIPMarvellNuvoton OkiRenesas
TransceiversClareExarFinisarGennumMarvellSTVitesse
TELECOMCentralOffice(CODECs, SLICs, DAA, xDSL)AtmelClareConexantExarNuvoton OkiRenesasSTVitesse
SwitchingExarVitesse
ISMAtmelLattice MicrelNordicRFMST
RFIDAtmelLattice ST
802.11 a/b/g/nConnectBlueDigiH&D WirelessMarvellRFMSharpST
MicrowaveCELIXYSLattice
BluetoothConnectBlueRFM
ZigBeeAtmelCELConnectBlueOki RenesasRFMST
Discretes (RF)AKM SemiconductorAtmelCELIXYSLTCMicrelRFMST
GPSAtmelST
WiMaxSharp
WIRELESS
DISK / INTERFACESAS/SCSIMarvellVitesse
SATA/ATAAtmel Exar MarvellSilicon ImageSMSCVitesse
FibreChannelLattice MarvellVitesse
Solid StateMicronSilicon MotionSMSC
ParallelLattice NuvotonPericom
Low Speed Serial (under 1 MB/sec) Exar Lattice Linear TechnologyMicrelOki Renesas SMSC ST
High Speed Serial(above 1 MB/sec) GennumLattice MarvellMicrelPericom Renesas SMSCST
Level TranslatorsAtmelLattice Linear TechnologyMicrelPericomST
BUS INTERFACE
DATACOMEthernet MACMarvellMicrelSMSC ST
WAN / TransportExarGennumMarvellVitesse
Ethernet SwitchingMarvellVitesse
USBRenesasSilicon MotionSMSC
OpticalConexantFinisarGennum
Non-VolatileEPROMAtmelOkiST
E2PROMAKM SemiconductorAtmelISSIRenesasST
FlashAtmelISSIMicronRenesasSharpWinbond
Storage ControllersSilicon MotionSMSC
VolatileDRAMISSIMicronOkiWinbond
SRAMAtmelGSI TechnologyISSIRenesasSharpSTWinbond
FIFOOki
MEMORY
ASICAtmelChip-X
CPLDAtmelLattice
FPGAAtmelLattice
LOGICSPLDAtmelLattice
StandardMurata Power SolutionsPericomRenesasST
EthernetLatticeMarvellMicrelSMSCSTVitesse
Transformers / IsolatorsWurth Midcom
PHYSICAL LAYER
AKM SemiconductorConexantGennumLattice MarvellNuvoton
Oki OmnivisionSilicon ImageSilicon Motion ST
AUDIO / VIDEO
19
Enhance Your Design...With Nu Horizons Education and Development Solutions
LabCam delivers online training opportunities in a way that recognizes the value of engineers’ time. As easily as You Tube® videos, engineers can quickly load and watch videos from industry leaders consisting of insights on products, evaluation kit overviews, end-user applications and more. Each tutorial is up to ten minutes in length and features technology experts, CEOs and/or peers introducing new solutions or explaining integral aspects of an important product, solution or application. This free value-added program is packaged for short, informative and high quality distance learning.
Nu Horizons is proud to present our education and training program, which offers engineers the opportunity to participate in technical seminars conducted by experts focused on the latest technologies from our leading suppliers. This program provides higher velocity learning to help minimize start-up time to quickly begin your design process utilizing the latest development tools, software and products. Check online for the latest seminar schedule.
In order to simplify the design process, Nu Horizons has created a series of application notes designed to guide engineers through the process of interfacing different devices together. Using a detailed step-by-step approach, these design guides identify key elements in the design process. Topics in the application notes are organized by design task and each topic is a stand-alone section, with a short introduction or overview, followed by the step-by-step design guidelines. All steps include a sufficient level of detail to provide the designer with relevant information to proceed quickly and easily from start to finish.
Nu Horizons offers a wide range of development / evaluation boards, tools and kits featuring the latest technology from the most trusted suppliers in the industry. Visit the development tool section of our website for a variety of solutions all aimed at providing a low-cost solution for designers to accelerate a product’s time-to-market.
www.nuhorizons.com/labcam
www.nuhorizons.com/portal
www.nuhorizons.com/xpresstrack
www.nuhorizons.com/olc
www.nuhorizons.com/appnotes
Application Notes
Online Learning Center
DevelopmentToolswww.nuhorizons.com/devtools
Portal is a monthly publication containing new products, technologies and development tools available from Nu Horizons leading suppliers. Portal is availabe both in print and on the web. Sign up online to receive your copy, be notified of upcoming issues or to request samples of the products found inside.
Nu Horizons Online Learning Center is designed to provide a complete training experience for engineers — without having to leave the office. New supplier trainings are posted twice a month and range from new product overviews to in-depth technical training and potential design implementations. These live trainings are recorded and archived for your viewing convenience.