nuvoton technology corporation (ntc) was founded to … technology corporation (ntc) was founded to...
TRANSCRIPT
2
Nuvoton Technology Corporation (NTC) was founded to bring innovative semiconductor solutions to the market. NTC was spun-off as a Winbond Electronics affiliate in July 2008 and became public in September 2010 on the Taiwan Stock Exchange (TSE). Nuvoton Technology focuses on development of analog/mixed signal, microcontroller, microprocessor, cloud computing, power management products; and has strong market share in Industrial, Consumer and Computer markets. Nuvoton owns a wafer fab, featuring customized processes for analog, power and MCU products. Besides in-house IC products, the wafer fab also provides part of its capacity for foundry services. Nuvoton Technology provides high cost-performance ratio products by leveraging flexible technology, advanced design capability and integration of digital and analog technologies and is dedicated to continuous innovation in products, processes and services. Nuvoton values long term relationships with its partners and customers and has established subsidiaries in the USA, China, Israel, and India to strengthen regional customer support and global management. For more information, please visit http://www.nuvoton.com.
Nuvoton MCUNuvoton MCU (Microcontrollers) are widely used in various products from low-cost consumer gizmos to sophisticated industrial control systems. Recognizing the demand for increased performance and peripherals, Nuvoton continues to expand its product portfolio to meet the requirements of our existing and future customers.The Nuvoton NuMicro® Family comprises of three product lines: 32-bit MCUs with Arm® Cortex®-M0/M4 core, Arm7™/Arm9™ MPUs and 8-bit 8051 compatible MCUs; all with rich on-chip peripherals and have been widely adopted in various fields including IoT applications, smart home, mobile payment, industrial control, drone solutions, touch panels, network equipment, POS, home appliances, security systems, etc.
3
Arm® Cortex®-M0 MCUs
Arm® Cortex®-M4 MCUs
Arm9 MPUs
8051 MCUs
The NuMicro® Family Ecosystem
Nuvoton Technology Corporation certifies that semiconductor products designated by Nuvoton are compliant with the requirements of the European Union’s Restriction on Use of Hazardous Substances (“RoHS”) Directive, 2011/65/EU & Com mission Delegated Directive (EU) 2015/863.
Trademarks listed in this Catalog/CM are US registered trademarks. The real registration status trademarks in your country may be different.
05
22
34
36
38
NuMicro® Family MCUs
4 54 5
Microcontrollers
Contact us: [email protected]
NuMicro® Family - Arm® Cortex®-M0 MCUsBase Line Base Line
Video Line
Low Pin Count Line
Standard Line
Advanced Line
Ultra Low Power Line
USB Line
USB Line
Industrial Line
CAN Line
CAN Line
High Performance Line
Crypto Line
Ethernet Line
Audio Codec Line
LCD Line
NuMicro® Family - Arm® Cortex®-M4 MCUs
NuMicro® Family Arm9 MPUs
NuMicro® Family 8051 MCUs
The NuMicro® Family Ecosystem
Mini51 Mini55 Mini57 Mini58
M451 M451M
N3290 N3292
N76E N79E W79E
N78E N79
NUC100 NUC120 NUC121 NUC122 NUC123
Nano100 Nano102 Nano103
Nano120 Nano130 NUC120 NUC121
NUC442 NUC472 M452 M453
NUC970
NUC130 NUC131
NUC442 NUC472
M481 M482
NUC442 NUC472
NUC472 M487
NUC505
Nano110 Nano112 Nano130
The NuMicro® Family Ecosystem
M051 M0518M0519
NUC125 NUC126 NUC130 NUC131 NUC140
Nano110 Nano112
NUC122 NUC123 NUC125 NUC126
NUC140 NUC230
M453 M483
M483 M484
M485 M487
M482 M483 M484
W77 W78
M0564 M058SNUC029
NUC200 NUC220 NUC230 NUC240
Nano120 Nano130
NUC140 NUC220 NUC240
NUC240
M485 M487 NUC505
M487
M485 M487
W79
NuM
icro® Fam
ily - Arm
® Cortex
®-M0 M
CU
s
4 54 5
Package Code Package Dimension (mm)
F TSSOP20 4.4x6.5
E TSSOP28 4.4x9.7
T QFN33* 4x4
Z QFN33 5x5
N QFN48 7x7
L LQFP48 7x7
S LQFP64* 7x7
R LQFP64 10x10
V LQFP100 14x14
K LQFP128 14x14
J LQFP144 20x20
H LQFP176 24x24
● Package Dimension for Arm® Cortex®-M0/M4 MCUs
Contact us: [email protected]
NuMicro® Family Arm® Cortex®-M0 MCUsAs one of the leading microcontroller (MCU) companies in the world, Nuvoton provides the NuMicro 32-bit MCU family powered by the Arm® Cortex®-M0 core. The NuMicro M0 MCUs offers wide operating voltage from 2.5V to 5.5V, industrial operating temperature from -40°C to 105°C, high accuracy oscillator and high immunity (8KV ESD, 4KV EFT).
According to its applications and functionalities, the NuMicro M0 Family is further divided into different product lines:
Base Line The product line consists of MCUs with standard features and functionalities. It includes the M0564 series with Voltage Adjustable Interface (VAI), up to 144 MHz operating PWM, 20 channels of 12-bit ADC, and up to three sets of Universal Serial Control Interfaces (USCI).
Advanced LineIn addition to the basic MCU features, the Advanced Line offers rich peripherals and additional features such as USB, CAN bus and ComSeg LCD controller.
Ultra Low Power LineThe NuMicro M0 Ultra Low Power Line offers a diversity of power modes to help extend battery life. The Nano100, Nano102 and Nano112 series with ultra-low power consumption supports operating voltage from 1.8V to 3.6V, and VBAT power supply pin for RTC (Real-Time Clock) with power consumption under 1µA.
USB LineTh USB line supports USB 2.0 full speed/high speed connection with on-chip transceiver in device mode. The NUC126 series supports crystal-less USB interface and internal 48 MHz internal RC oscillator.
CAN LineThe product line provides up to 2 sets of CAN (Controller Area Network) bus interface which can be applied in automotive, smart building and industrial applications. The CAN bus interface is fully compliant with the BOSCH CAN Specification 2.0.
LCD LineThe LCD line supports Com/Seg LCD interface. The built-in LCD controller support resolutions from 4x20 to 6x38.
The NuMicro® Family Cortex®-M0 MCUs are ideal solutions for industrial control systems, industrial automation, consumer products, embedded network control, energy power systems, motor control, etc.
NuM
icro® Fam
ily - Arm
® Cortex
®-M0 M
CU
s
6 7
Base Line
Base Line
Development Tools: NT-Mini51F (Mini51, Mini52, Mini54)/ NT-Mini51L (Mini51, Mini52, Mini54)/ NT-Mini58L (Mini58L)Mass Production Programmer: NG-Mini51X (Mini51X, Mini52X, Mini54X, Mini58X); X stands for Package Code.
Development Tools: NT-Mini57EMass Production Programmer: NLG-Mini57X (Mini57X); X stands for Package Code.
Development Tools: NT-Mini58L (Mini58L)Mass Production Programmer: NG-Mini58X; X stands for Package Code.
Development Tools: NT-Mini55LMass Production Programmer: NLG-Mini51X (Mini55X); X stands for Package Code.
● Mini51 Series
● Mini55 Series
● Mini57 Series
● Mini58 Series
QFN33*: 4x4mm
QFN33*: 4x4mm
QFN33*: 4x4mm
QFN33*: 4x4mm
Part No. Flash(Kbytes)
SRAM(Kbytes) Data Flash
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity PWM(16-bit)
ADC(10-bit) Comparator
ICPIAPISP
IRC10 kHz22 MHz
Package Operating Temp. Range (°C )UART SPI I²C
MINI51FDE 4 2 Configurable 2 17 2 1 1 1 3 4 - √ √ TSSOP20 -40 to +105
MINI51TDE 4 2 Configurable 2 29 2 1 1 1 6 8 2 √ √ QFN33* -40 to +105
MINI51ZDE 4 2 Configurable 2 29 2 1 1 1 6 8 2 √ √ QFN33 -40 to +105
MINI51LDE 4 2 Configurable 2 30 2 1 1 1 6 8 2 √ √ LQFP48 -40 to +105
MINI52FDE 8 2 Configurable 2 17 2 1 1 1 3 4 - √ √ TSSOP20 -40 to +105
MINI52TDE 8 2 Configurable 2 29 2 1 1 1 6 8 2 √ √ QFN33* -40 to +105
MINI52ZDE 8 2 Configurable 2 29 2 1 1 1 6 8 2 √ √ QFN33 -40 to +105
MINI52LDE 8 2 Configurable 2 30 2 1 1 1 6 8 2 √ √ LQFP48 -40 to +105
MINI54FDE 16 2 Configurable 2 17 2 1 1 1 3 4 - √ √ TSSOP20 -40 to +105
MINI54TDE 16 2 Configurable 2 29 2 1 1 1 6 8 2 √ √ QFN33* -40 to +105
MINI54ZDE 16 2 Configurable 2 29 2 1 1 1 6 8 2 √ √ QFN33 -40 to +105
MINI54LDE 16 2 Configurable 2 30 2 1 1 1 6 8 2 √ √ LQFP48 -40 to +105
Part No. Flash(Kbytes)
SRAM(Kbytes) Data Flash
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity PWM(16-bit)
ADC(10-bit) Comparator
ICPIAPISP
IRC10 kHz48 MHz
Package Operating Temp. Range (°C )USCI* UART SPI I²C
MINI55TDE 17.5 2 Configurable 2 29 2 - 2 1 1 6 12 2 √ √ QFN33* -40 to +105
MINI55LDE 17.5 2 Configurable 2 33 2 - 2 1 1 6 12 2 √ √ LQFP48 -40 to +105
*USCI can be set to UART, SPI or I²C.
*USCI can be set to UART, SPI or I²C.
Part No. Flash(Kbytes)
SRAM(Kbytes) Data Flash
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity PWM(16-bit)
ADC(10-bit) Comparator
ICPIAPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )UART SPI I²C
MINI58FDE 32 4 Configurable 2.5 17 2 2 1 2 6 4 - √ √ TSSOP20 -40 to +105
MINI58TDE 32 4 Configurable 2.5 29 2 2 1 2 6 8 2 √ √ QFN33* -40 to +105
MINI58ZDE 32 4 Configurable 2.5 29 2 2 1 2 6 8 2 √ √ QFN33 -40 to +105
MINI58LDE 32 4 Configurable 2.5 30 2 2 1 2 6 8 2 √ √ LQFP48 -40 to +105
Part No. Flash(Kbytes)
SRAM(Kbytes) Data Flash
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity PWM(16-bit)
ADC(12-bit) PGA Comparator
ICPIAPISP
IRC10 kHz48 MHz
PackageOperating
Temp. Range (°C )USCI* UART SPI I²C
MINI57FDE 29.5 4 Configurable 2.5 18 2 2 - - - 8 8 √ 2 √ √ TSSOP20 -40 to +105
MINI57EDE 29.5 4 Configurable 2.5 22 2 2 - - - 8 8 √ 2 √ √ TSSOP28 -40 to +105
MINI57TDE 29.5 4 Configurable 2.5 22 2 2 - - - 8 8 √ 2 √ √ QFN33* -40 to +105
*USCI can be set to UART, SPI or I²C.
NuM
icro® Fam
ily - Arm
® Cortex
®-M0 M
CU
s
6 7
Development Tools: NT-M0518S (M0518)Mass Production Programmer: NG-M0518X (M0518X) ; X stands for Package Code.
Development Tools: NT-M0519V (M0519)Mass Production Programmer: NG-M0519X (M0519X) ; X stands for Package Code.
Development Tools: NT-M051L (M052, M054, M058, M0516)Mass Production Programmer: NG-M051X (M052X, M054X, M058X, M0516X) ; X stands for Package Code.
● M0518 Series
● M0519 Series
LQFP64*: 7x7mm
LQFP64*: 7x7mm
LQFP64*: 7x7mm
● M051 Series
Part No. Flash(Kbytes)
SRAM(Kbytes)
Data Flash
(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity PWM(16-bit)
ADC(12-bit) Comparator EBI
ICPIAPISP
IRC10 kHz22 MHz
Package Operating Temp. Range (°C )UART SPI I²C
M052ZDN 8 4 4 4 24 4 2 1 2 5 5 3 - √ √ QFN33 -40 to +85
M052LDN 8 4 4 4 40 4 2 2 2 8 8 4 √ √ √ LQFP48 -40 to +85
M052ZDE 8 4 4 4 24 4 2 1 2 5 5 3 - √ √ QFN33 -40 to +105
M052LDE 8 4 4 4 40 4 2 2 2 8 8 4 √ √ √ LQFP48 -40 to +105
M054ZDN 16 4 4 4 24 4 2 1 2 5 5 3 - √ √ QFN33 -40 to +85
M054LDN 16 4 4 4 40 4 2 2 2 8 8 4 √ √ √ LQFP48 -40 to +85
M054ZDE 16 4 4 4 24 4 2 1 2 5 5 3 - √ √ QFN33 -40 to +105
M054LDE 16 4 4 4 40 4 2 2 2 8 8 4 √ √ √ LQFP48 -40 to +105
M058ZDN 32 4 4 4 24 4 2 1 2 5 5 3 - √ √ QFN33 -40 to +85
M058LDN 32 4 4 4 40 4 2 2 2 8 8 4 √ √ √ LQFP48 -40 to +85
M058ZDE 32 4 4 4 24 4 2 1 2 5 5 3 - √ √ QFN33 -40 to +105
M058LDE 32 4 4 4 40 4 2 2 2 8 8 4 √ √ √ LQFP48 -40 to +105
M0516ZDN 64 4 4 4 24 4 2 1 2 5 5 3 - √ √ QFN33 -40 to +85
M0516LDN 64 4 4 4 40 4 2 2 2 8 8 4 √ √ √ LQFP48 -40 to +85
M0516ZDE 64 4 4 4 24 4 2 1 2 5 5 3 - √ √ QFN33 -40 to +105
M0516LDE 64 4 4 4 40 4 2 2 2 8 8 4 √ √ √ LQFP48 -40 to +105
Part No. Flash(Kbytes)
SRAM(Kbytes) Data Flash
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity PWM(16-bit)
ADC(12-bit)
ICPIAPISP
IRC10 kHz22 MHz
Package Operating Temp. Range (°C )UART SPI I²C LIN
M0518LC2AE 36 8 Configurable 4 42 4 6 1 2 3 24 8 √ √ LQFP48 -40 to +105
M0518SC2AE 36 8 Configurable 4 56 4 6 1 2 3 24 8 √ √ LQFP64* -40 to +105
M0518LD2AE 68 8 Configurable 4 42 4 6 1 2 3 24 8 √ √ LQFP48 -40 to +105
M0518SD2AE 68 8 Configurable 4 56 4 6 1 2 3 24 8 √ √ LQFP64* -40 to +105
Part No. Flash(Kbytes)
SRAM(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O
Timer(32-bit)
Connectivity PWM(16-bit)
ADC(12-bit) Comparator OPA Capture
ICPIAPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )UART SPI I²C LIN
M0519LD3AE 64 16 4 8 38 4 2 1 1 2 6 16 2 2 - √ √ LQFP48 -40 to +105
M0519SD3AE 64 16 4 8 51 4 2 2 1 2 10 16 2 2 - √ √ LQFP64* -40 to +105
M0519LE3AE 128 16 Configurable 8 38 4 2 1 1 2 6 16 2 2 - √ √ LQFP48 -40 to +105
M0519SE3AE 128 16 Configurable 8 51 4 2 2 1 2 10 16 2 2 - √ √ LQFP64* -40 to +105
M0519VE3AE 128 16 Configurable 8 82 4 2 3 1 2 14 16 3 2 6 √ √ LQFP100 -40 to +105
Base Line
NuM
icro® Fam
ily - Arm
® Cortex
®-M0 M
CU
s
8 9
Development Tools: NT-M058SF (M058S)/ NT-M058SS (M058S)Mass Production Programmer: NG-M058SX (M058SX) ; X stands for Package Code.
Development Tools: Mass Production Programmer: Mass Production Programmer: NG-NUC029X (NUC029X) ; X stands for Package Code.
Development Tools: NT-M0564VMass Production Programmer: NLG-M0564X
● M058S Series
● NUC029 Series
● M0564 Series
LQFP64*: 7x7mm
LQFP64*: 7x7mm
QFN33*: 4x4mm
Part No. Flash(Kbytes)
SRAM(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity PWM(16-bit)
ADC(12-bit) Comparator EBI
ICPIAPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )UART SPI I²C
M058SFAN 32 4 4 4 14 4 1 1 1 1 2 - - √ √ TSSOP20 -40 to +85
M058SZAN 32 4 4 4 26 4 1 1 1 2 5 - - √ √ QFN33 -40 to +85
M058SLAN 32 4 4 4 42 4 1 1 2 4 8 - - √ √ LQFP48 -40 to +85
M058SSAN 32 4 4 4 55 4 1 1 2 4 8 - - √ √ LQFP64* -40 to +85
Part No. Flash(Kbytes)
SRAM(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity PWM(16-bit)
ADC(12-bit)
ADC(10-bit) Comparator EBI
ICPIAPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )UART SPI I²C
NUC029FAE 16 2 Configurable 2 17 2 1 1 1 3 - 4 2 - √ √ TSSOP20 -40 to +105
NUC029TAN 32 4 4 4 24 4 2 1 2 5 5 - 3 - √ √ QFN33* -40 to +85
NUC029ZAN 64 4 4 4 24 4 2 1 2 5 5 - 3 - √ √ QFN33 -40 to +85
NUC029LAN 64 4 4 4 40 4 2 2 2 8 8 - 4 √ √ √ LQFP48 -40 to +85
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
SPRO
M(Kbytes)
ISP ROM
(Kbytes) I/O
Timer
/PWM
PWM
Connectivity
ADC
(12-bit)
ACM
P
PDM
A
RTC (V
BAT)
VD
DIO
(1.8V-5.5V)
EBI
ICPIAPISP
IRC10 kHz22 MHz48 MHz
PackageOperating
Temp. Range (°C )
USC
I*
UART
ISO-
7816-3*
SPI/I²S I²C
M0564LE4AE 128 20 Configurable 2 4 41 4 12 3 3 2 2 2 10-ch 2 5 - √ √ √ √ LQFP48 -40 to +105
M0564SE4AE 128 20 Configurable 2 4 53 4 12 3 3 2 2 2 15-ch 2 5 √ √ √ √ √ LQFP64* -40 to +105
M0564LG4AE 256 20 Configurable 2 4 41 4 12 3 3 2 2 2 10-ch 2 5 - √ √ √ √ LQFP48 -40 to +105
M0564SG4AE 256 20 Configurable 2 4 53 4 12 3 3 2 2 2 15-ch 2 5 √ √ √ √ √ LQFP64* -40 to +105
M0564VG4AE 256 20 Configurable 2 4 85 4 12 3 3 2 2 2 20-ch 2 5 √ √ √ √ √ LQFP100 -40 to +105
*ISO-7816 UART supports full duplex mode.*USCI can be set to UART, SPI or I²C.
Base Line
NuM
icro® Fam
ily - Arm
® Cortex
®-M0 M
CU
s
8 9
● NUC100 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S PWM(16-bit)
ADC(12-bit)
Com
parator
RTC EBI PDMA ISO-7816-3
ICPIAPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )
UARTSPII²C
USBLIN
CAN
NUC100LC1DN 32 4 4 4 37 4 2 1 2 - - - 1 6 8 1 √ - 9 3 √ √ LQFP48 -40 to +85
NUC100RC1DN 32 4 4 4 51 4 3 2 2 - - - 1 6 8 2 √ √ 9 3 √ √ LQFP64 -40 to +85
NUC100LD2DN 64 8 4 4 37 4 2 1 2 - - - 1 6 8 1 √ - 9 3 √ √ LQFP48 -40 to +85
NUC100RD1DN 64 4 4 4 51 4 3 2 2 - - - 1 6 8 2 √ √ 9 3 √ √ LQFP64 -40 to +85
NUC100RD2DN 64 8 4 4 51 4 3 2 2 - - - 1 6 8 2 √ √ 9 3 √ √ LQFP64 -40 to +85
NUC100LE3DN 128 16 Configurable 4 37 4 2 1 2 - - - 1 6 8 1 √ - 9 3 √ √ LQFP48 -40 to +85
NUC100RE3DN 128 16 Configurable 4 51 4 3 2 2 - - - 1 6 8 2 √ √ 9 3 √ √ LQFP64 -40 to +85
NUC100VE3DN 128 16 Configurable 4 84 4 3 4 2 - - - 1 8 8 2 √ √ 9 3 √ √ LQFP100 -40 to +85
Development Tools: NT-NUC100V (NUC100)/ NT-NUC120V (NUC100, NUC120)Mass Production Programmer: NG-NUC100X (NG-NUC100X) ; X stands for Package Code.
● NUC120 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S PWM(16-bit)
ADC(12-bit)
Com
parator
RTC EBI PDMA ISO-7816-3
ICPIAPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )
UARTSPII²C
USBLIN
CAN
NUC120LC1DN 32 4 4 4 33 4 2 1 2 1 - - 1 4 8 1 √ - 9 3 √ √ LQFP48 -40 to +85
NUC120RC1DN 32 4 4 4 47 4 2 2 2 1 - - 1 6 8 2 √ √ 9 3 √ √ LQFP64 -40 to +85
NUC120LD2DN 64 8 4 4 33 4 2 1 2 1 - - 1 4 8 1 √ - 9 3 √ √ LQFP48 -40 to +85
NUC120RD2DN 64 8 4 4 47 4 2 2 2 1 - - 1 6 8 2 √ √ 9 3 √ √ LQFP64 -40 to +85
NUC120LE3DN 128 16 Configurable 4 33 4 2 1 2 1 - - 1 4 8 1 √ - 9 3 √ √ LQFP48 -40 to +85
NUC120RE3DN 128 16 Configurable 4 47 4 2 2 2 1 - - 1 6 8 2 √ √ 9 3 √ √ LQFP64 -40 to +85
NUC120VE3DN 128 16 Configurable 4 80 4 3 4 2 1 - - 1 8 8 2 √ √ 9 3 √ √ LQFP100 -40 to +85
Development Tools: NT-NUC120VMass Production Programmer: NG-NUC100X (NG-NUC100X) ; X stands for Package Code.● NUC121 Series
Part No. Flash(Kbytes)
SRAM(Kbytes)
ISP ROM
(Kbytes)
SPROM(Kbytes) I/O Timer
Connectivity
PWM ADC(12-bit) PDMA
ICPIAPISP
IRC10 kHz48 MHz
PackageOperating
Temp. Range (°C )
USC
I*U
ARTSPI/I²S I²CU
SBD
NUC121ZC2AE 32 8 4.5 0.5 22 4 1 1 1 2 1 17 4-ch 5-ch √ √ QFN33 -40 to +105
NUC121LC2AE 32 8 4.5 0.5 38 4 1 1 1 2 1 24 10-ch 5-ch √ √ LQFP48 -40 to +105
NUC121SC2AE 32 8 4.5 0.5 52 4 1 1 1 2 1 24 12-ch 5-ch √ √ LQFP64* -40 to +105
*USCI can be set to UART, SPI or I²C. LQFP64*: 7x7mmDevelopment Tools: NT-NUC121SMass Production Programmer: NLG-NUC121X (NUC121X); X stands for Package Code.
● NUC122 Series
Part No. Flash(Kbytes)
SRAM(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
PS2 I²S Comparator PWM(16-bit) RTC
ICPIAPISP
IRC10 kHz22 MHz
Package Operating Temp. Range (°C )U
ARTSPII²C
USBLIN
CAN
NUC122ZC1DN 32 4 4 18 4 1 2 1 1 - - - - - - - √ √ QFN33 -40 to +85
NUC122LC1DN 32 4 4 30 4 2 2 1 1 - - 1 - - 4 √ √ √ LQFP48 -40 to +85
NUC122SC1DN 32 4 4 41 4 2 2 1 1 - - 1 - - 4 √ √ √ LQFP64* -40 to +85
NUC122ZD2DN 64 8 4 18 4 1 2 1 1 - - - - - - - √ √ QFN33 -40 to +85
NUC122LD2DN 64 8 4 30 4 2 2 1 1 - - 1 - - 4 √ √ √ LQFP48 -40 to +85
NUC122SD2DN 64 8 4 41 4 2 2 1 1 - - 1 - - 4 √ √ v LQFP64* -40 to +85
Development Tools: NT-NUC122SMass Production Programmer: NG-NUC122L
LQFP64*: 7x7mm
Advanced Line
Advanced Line
NuM
icro® Fam
ily - Arm
® Cortex
®-M0 M
CU
s
10 11
Advanced Line
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data FlashISP
ROM(Kbytes) I/O
Timer
(32-bit)
Connectivity
PS2
I²S
Com
parator
PWM
(16-bit)
ADC
(10-bit)
RTC
PDM
A
CR
C
ICPIAPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )
UARTSPII²C
USBLIN
CAN
NUC123ZC2AN1 36 12 Configurable 4 20 4 1 3 1 1 - - - 1 - 2 3 - 6 √ √ √ QFN33 -40 to +85
NUC123LC2AN1 36 12 Configurable 4 36 4 2 3 2 1 - - 1 1 - 4 8 - 6 √ √ √ LQFP48 -40 to +85
NUC123SC2AN1 36 12 Configurable 4 47 4 2 3 2 1 - - 1 1 - 4 8 - 6 √ √ √ LQFP64* -40 to +85
NUC123ZC2AE1 36 12 Configurable 4 20 4 1 3 1 1 - - - 1 - 3 3 - 6 √ √ √ QFN33 -40 to +105
NUC123LC2AE1 36 12 Configurable 4 36 4 2 3 2 1 - - 1 1 - 4 8 - 6 √ √ √ LQFP48 -40 to +105
NUC123SC2AE1 36 12 Configurable 4 47 4 2 3 2 1 - - 1 1 - 4 8 - 6 √ √ √ LQFP64* -40 to +105
NUC123ZD4AN0 68 20 Configurable 4 20 4 1 3 1 1 - - - 1 - 2 3 - 6 √ √ √ QFN33 -40 to +85
NUC123LD4AN0 68 20 Configurable 4 36 4 2 3 2 1 - - 1 1 - 4 8 - 6 √ √ √ LQFP48 -40 to +85
NUC123SD4AN0 68 20 Configurable 4 47 4 2 3 2 1 - - 1 1 - 4 8 - 6 √ √ √ LQFP64* -40 to +85
NUC123ZD4AE0 68 20 Configurable 4 20 4 1 3 1 1 - - - 1 - 3 3 - 6 √ √ √ QFN33 -40 to +105
NUC123LD4AE0 68 20 Configurable 4 36 4 2 3 2 1 - - 1 1 - 4 8 - 6 √ √ √ LQFP48 -40 to +105
NUC123SD4AE0 68 20 Configurable 4 47 4 2 3 2 1 - - 1 1 - 4 8 - 6 √ √ √ LQFP64* -40 to +105
● NUC123 Series
Development Tools: NT-NUC123S (NUC123)Mass Production Programmer: NG-NUC123X (NUC123X); X stands for Package Code.
Part No. Flash (Kbytes)
SRAM (Kbytes)
LDROM(Kbytes)
SPROM(Kbytes) I/O Timer VDDIO
(1.8V-5.5V)
ConnectivityPWM ADC
(12-bit) PDMAICPIAPISP
IRC10 kHz48 MHz
PackageOperating
Temp. Range (°C )USCI* UART SPI/
I²S I²C USBD
NUC125ZC2AE 32 8 4.5 0.5 22 4 √ 1 1 1 2 1 17 4-ch 5-ch √ √ QFN33 -40 to +105
NUC125LC2AE 32 8 4.5 0.5 37 4 √ 1 1 1 2 1 23 10-ch 5-ch √ √ LQFP48 -40 to +105
NUC125SC2AE 32 8 4.5 0.5 51 4 √ 1 1 1 2 1 23 12-ch 5-ch √ √ LQFP64* -40 to +105
● NUC125 Series
*USCI can be set to UART, SPI or I²C.
LQFP64*: 7x7mm
LQFP64*: 7x7mmDevelopment Tools: NT-NUC125SMass Production Programmer: NLG-NUC125X (NUC125X); X stands for Package Code.
Part No. Flash(Kbytes)
SRAM
(Kbytes)Data Flash(Kbytes)
SPROM(Kbytes)
ISP ROM
(Kbytes)I/O Tim
er /PW
M
PWM
Connectivity
ADC(12-bit)
ACM
PPD
MA
RTC(V
BAT)
VD
DIO
(1.8V-5.5V)
EBI
ICPIAPISP
IRC10 kHz22 MHz48 MHz
PackageOperating
Temp. Range (°C )
USBD
USC
I*U
ART
ISO-
7816-3*
SPI/I²S I²C
NUC126LE4AE 128 20 Configurable 2 4 35 4 10 1 3 3 2 2 2 9-ch 2 5 - √ √ √ √ LQFP48 -40 to +105
NUC126SE4AE 128 20 Configurable 2 4 49 4 12 1 3 3 2 2 2 15-ch 2 5 √ √ √ √ √ LQFP64* -40 to +105
NUC126LG4AE 256 20 Configurable 2 4 35 4 10 1 3 3 2 2 2 9-ch 2 5 - √ √ √ √ LQFP48 -40 to +105
NUC126SG4AE 256 20 Configurable 2 4 49 4 12 1 3 3 2 2 2 15-ch 2 5 √ √ √ √ √ LQFP64* -40 to +105
NUC126VG4AE 256 20 Configurable 2 4 81 4 12 1 3 3 2 2 2 20-ch 2 5 √ √ √ √ √ LQFP100 -40 to +105
● NUC126 Series
LQFP64*: 7x7mm*USCI can be set to UART, SPI or I²C.*ISO-7816 UART supports full duplex mode.
Development Tools: NT-NUC126VMass Production Programmer: NLG-NUC126X (NUC126X) ; X stands for Package Code.
NuM
icro® Fam
ily - Arm
® Cortex
®-M0 M
CU
s
10 11
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S PWM(16-bit)
ADC(12-bit)
Com
parator
RTC
EBI
PDM
A
ISO-7816-3
ICPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )
UARTSPII²C
USBLIN
CAN
NUC130LC1CN 32 4 4 4 35 4 3 1 2 - 2 1 1 4 8 1 √ - 9 - √ √ LQFP48 -40 to +85
NUC130RC1CN 32 4 4 4 49 4 3 2 2 - 2 1 1 6 8 2 √ √ 9 - √ √ LQFP64 -40 to +85
NUC130LD2CN 64 8 4 4 35 4 3 1 2 - 2 1 1 4 8 1 √ - 9 - √ √ LQFP48 -40 to +85
NUC130RD2CN 64 8 4 4 49 4 3 2 2 - 2 1 1 6 8 2 √ √ 9 - √ √ LQFP64 -40 to +85
NUC130LE3CN 128 16 Configurable 4 35 4 3 1 2 - 2 1 1 4 8 1 √ - 9 - √ √ LQFP48 -40 to +85
NUC130RE3CN 128 16 Configurable 4 49 4 3 2 2 - 2 1 1 6 8 2 √ √ 9 - √ √ LQFP64 -40 to +85
NUC130VE3CN 128 16 Configurable 4 80 4 3 4 2 - 2 1 1 8 8 2 √ √ 9 - √ √ LQFP100 -40 to +85
● NUC130 Series
Development Tools: NT-NUC140VMass Production Programmer: NG-NUC100X (NG-NUC100X) ; X stands for Package Code.
● NUC131 Series
Part No. Flash (Kbytes)
SRAM (Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
ConnectivityPWM
(16-bit)ADC
(12-bit)
ICPIAPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )UART SPI I²C LIN CAN
NUC131LC2AE 36 8 Configurable 4 42 4 6 1 2 3 1 24 8 √ √ LQFP48 -40 to +105
NUC131SC2AE 36 8 Configurable 4 56 4 6 1 2 3 1 24 8 √ √ LQFP64* -40 to +105
NUC131LD2AE 68 8 Configurable 4 42 4 6 1 2 3 1 24 8 √ √ LQFP48 -40 to +105
NUC131SD2AE 68 8 Configurable 4 56 4 6 1 2 3 1 24 8 √ √ LQFP64* -40 to +105
LQFP64*: 7x7mmDevelopment Tools: NT-NUC131S (NUC131)Mass Production Programmer: NG-NUC131X (NUC131X); X stands for Package Code.
● NUC140 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S PWM(16-bit)
ADC(12-bit)
Com
parator
RTC
EBI
PDM
A
ICPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )
UART
SPII²C
USBLIN
CAN
NUC140LC1CN 32 4 4 4 31 4 2 1 2 1 2 1 1 4 8 1 √ - 9 √ √ LQFP48 -40 to +85
NUC140RC1CN 32 4 4 4 45 4 3 2 2 1 2 1 1 4 8 2 √ √ 9 √ √ LQFP64 -40 to +85
NUC140LD2CN 64 8 4 4 31 4 2 1 2 1 2 1 1 4 8 1 √ - 9 √ √ LQFP48 -40 to +85
NUC140RD2CN 64 8 4 4 45 4 3 2 2 1 2 1 1 4 8 2 √ √ 9 √ √ LQFP64 -40 to +85
NUC140LE3CN 128 16 Configurable 4 31 4 2 1 2 1 2 1 1 4 8 1 √ - 9 √ √ LQFP48 -40 to +85
NUC140RE3CN 128 16 Configurable 4 45 4 3 2 2 1 2 1 1 4 8 2 √ √ 9 √ √ LQFP64 -40 to +85
NUC140VE3CN 128 16 Configurable 4 76 4 3 4 2 1 2 1 1 8 8 2 √ √ 9 √ √ LQFP100 -40 to +85
Development Tools: NT-NUC140VMass Production Programmer: NG-NUC100X (NG-NUC100X) ; X stands for Package Code.
● NUC200 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S PWM(16-bit)
ADC(12-bit)
Com
parator
PDM
A
ISO-7816-3*
CR
C
RTC(V
BAT)
ICPIAPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )
UARTSPII²C
USBLIN
CAN
NUC200LC2AN 32 8 4 4 35 4 2 1 2 - - - 1 6 7 1 9 2 √ √ √ √ LQFP48 -40 to +85
NUC200SC2AN 32 8 4 4 49 4 3 2 2 - - - 1 6 7 2 9 2 √ √ √ √ LQFP64* -40 to +85
NUC200LD2AN 64 8 4 4 35 4 2 1 2 - - - 1 6 7 1 9 2 √ √ √ √ LQFP48 -40 to +85
NUC200SD2AN 64 8 4 4 49 4 3 2 2 - - - 1 6 7 2 9 2 √ √ √ √ LQFP64* -40 to +85
NUC200LE3AN 128 16 Configurable 4 35 4 2 1 2 - - - 1 6 7 1 9 2 √ √ √ √ LQFP48 -40 to +85
NUC200SE3AN 128 16 Configurable 4 49 4 3 2 2 - - - 1 6 7 2 9 2 √ √ √ √ LQFP64* -40 to +85
NUC200VE3AN 128 16 Configurable 4 83 4 3 4 2 - - - 1 8 8 2 9 3 √ √ √ √ LQFP100 -40 to +85
*ISO-7816 UART supports half duplex mode.Development Tools: NT-NUC200V (NUC200)Mass Production Programmer: NG-NUC200X; X stands for Package Code.
LQFP64*: 7x7mm
Advanced Line
NuM
icro® Fam
ily - Arm
® Cortex
®-M0 M
CU
s
12 13
● NUC220 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S PWM(16-bit)
ADC(12-bit)
Com
parator
PDM
A
ISO-7816-3*
CR
C
RTC(V
BAT)
ICPIAPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )
UARTSPII²C
USBLIN
CAN
NUC220LC2AN 32 8 4 4 31 4 2 1 2 1 - - 1 4 7 1 9 2 √ √ √ √ LQFP48 -40 to +85
NUC220SC2AN 32 8 4 4 45 4 2 2 2 1 - - 1 6 7 2 9 2 √ √ √ √ LQFP64* -40 to +85
NUC220LD2AN 64 8 4 4 31 4 2 1 2 1 - - 1 4 7 1 9 2 √ √ √ √ LQFP48 -40 to +85
NUC220SD2AN 64 8 4 4 45 4 2 2 2 1 - - 1 6 7 2 9 2 √ √ √ √ LQFP64* -40 to +85
NUC220LE3AN 128 16 Configurable 4 31 4 2 1 2 1 - - 1 4 7 1 9 2 √ √ √ √ LQFP48 -40 to +85
NUC220SE3AN 128 16 Configurable 4 45 4 2 2 2 1 - - 1 6 7 2 9 2 √ √ √ √ LQFP64* -40 to +85
NUC220VE3AN 128 16 Configurable 4 79 4 3 4 2 1 - - 1 8 8 2 9 3 √ √ √ √ LQFP100 -40 to +85
*ISO-7816 UART supports half duplex mode.
● NUC230 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S PWM(16-bit)
ADC(12-bit)
Com
parator
PDM
A
ISO-7816-3
CR
C
RTC(V
BAT)
ICPIAPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )
UART*
SPII²C
USBLIN
CAN
NUC230LC2AE 32 8 4 8 35 4 3+2 1 2 - 3 2 1 4 7 1 9 2 √ √ √ √ LQFP48 -40 to +105
NUC230SC2AE 32 8 4 8 49 4 3+2 2 2 - 3 2 1 6 7 2 9 2 √ √ √ √ LQFP64* -40 to +105
NUC230LD2AE 64 8 4 8 35 4 3+2 1 2 - 3 2 1 4 7 1 9 2 √ √ √ √ LQFP48 -40 to +105
NUC230SD2AE 64 8 4 8 49 4 3+2 2 2 - 3 2 1 6 7 2 9 2 √ √ √ √ LQFP64* -40 to +105
NUC230LE3AE 128 16 Configurable 8 35 4 3+2 1 2 - 3 2 1 4 7 1 9 2 √ √ √ √ LQFP48 -40 to +105
NUC230SE3AE 128 16 Configurable 8 49 4 3+2 2 2 - 3 2 1 6 7 2 9 2 √ √ √ √ LQFP64* -40 to +105
NUC230VE3AE 128 16 Configurable 8 83 4 3+3 4 2 - 3 2 1 8 8 2 9 3 √ √ √ √ LQFP100 -40 to +105
*Marked in the table (2+3) means 2 UART+ 3 ISO-7816 UART.*ISO-7816 UART supports half duplex mode.
Development Tools: NT-NUC220V (NUC220)Mass Production Programmer: NG-NUC220X; X stands for Package Code.
Development Tools: NT-NUC240VMass Production Programmer: NG-NUC200X (NUC230X); X stands for Package Code.
LQFP64*: 7x7mm
LQFP64*: 7x7mm
● NUC240 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S PWM(16-bit)
ADC(12-bit)
Com
parator
PDM
A
ISO-7816-3
CR
C
RTC(V
BAT)
ICPIAPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )
UART*
SPII²C
USBLIN
CAN
NUC240LC2AE 32 8 4 8 31 4 2+2 1 2 1 2 2 1 4 7 1 9 1 √ √ √ √ LQFP48 -40 to +105
NUC240SC2AE 32 8 4 8 45 4 3+2 2 2 1 3 2 1 4 7 2 9 2 √ √ √ √ LQFP64* -40 to +105
NUC240LD2AE 64 8 4 8 31 4 2+2 1 2 1 2 2 1 4 7 1 9 1 √ √ √ √ LQFP48 -40 to +105
NUC240SD2AE 64 8 4 8 45 4 3+2 2 2 1 3 2 1 4 7 2 9 2 √ √ √ √ LQFP64* -40 to +105
NUC240LE3AE 128 16 Configurable 8 31 4 2+2 1 2 1 2 2 1 4 7 1 9 1 √ √ √ √ LQFP48 -40 to +105
NUC240SE3AE 128 16 Configurable 8 45 4 3-2 2 2 1 3 2 1 4 7 2 9 2 √ √ √ √ LQFP64* -40 to +105
NUC240VE3AE 128 16 Configurable 8 79 4 3+3 4 2 1 3 2 1 8 8 2 9 3 √ √ √ √ LQFP100 -40 to +105
*Marked in the table (2+3) means 2 UART+ 3 ISO-7816 UART.*ISO-7816 UART supports half duplex mode.Development Tools: NT-NUC240VMass Production Programmer: NG-NUC200X (NUC240X); X stands for Package Code.
LQFP64*: 7x7mm
Advanced Line
NuM
icro® Fam
ily - Arm
® Cortex
®-M0 M
CU
s
12 13
Ultra Low
Power Line
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S PWM(16-bit)
ADC(12-bit) RTC
EBI
PDM
A
LCD
DAC
(12-bit)
ISO-7816-3*
ICPIAPISP
IRC10 kHz12 MHz
PackageOperating
Temp. Range (°C )
UART*
SPII²C
USB
NANO100NC2BN 32 8 Configurable 4 38 4 2+2 3 2 - 1 6 7 √ - 8 - 2 2 √ √ QFN48 -40 to +85
NANO100LC2BN 32 8 Configurable 4 38 4 2+2 3 2 - 1 6 7 √ - 8 - 2 2 √ √ LQFP48 -40 to +85
NANO100SC2BN 32 8 Configurable 4 52 4 2+3 3 2 - 1 8 7 √ - 8 - 2 3 √ √ LQFP64* -40 to +85
NANO100ND2BN 64 8 Configurable 4 38 4 2+2 3 2 - 1 6 7 √ - 8 - 2 2 √ √ QFN48 -40 to +85
NANO100ND3BN 64 16 Configurable 4 38 4 2+2 3 2 - 1 6 7 √ - 8 - 2 2 √ √ QFN48 -40 to +85
NANO100LD2BN 64 8 Configurable 4 38 4 2+2 3 2 - 1 6 7 √ - 8 - 2 2 √ √ LQFP48 -40 to +85
NANO100LD3BN 64 16 Configurable 4 38 4 2+2 3 2 - 1 6 7 √ - 8 - 2 2 √ √ LQFP48 -40 to +85
NANO100SD2BN 64 8 Configurable 4 52 4 2+3 3 2 - 1 8 7 √ - 8 - 2 3 √ √ LQFP64* -40 to +85
NANO100SD3BN 64 16 Configurable 4 52 4 2+3 3 2 - 1 8 7 √ - 8 - 2 3 √ √ LQFP64* -40 to +85
NANO100KD3BN 64 16 Configurable 4 86 4 2+3 3 2 - 1 8 12 √ √ 8 - 2 3 √ √ LQFP128 -40 to +85
NANO100NE3BN 128 16 Configurable 4 38 4 2+2 3 2 - 1 6 7 √ - 8 - 2 2 √ √ QFN48 -40 to +85
NANO100LE3BN 128 16 Configurable 4 38 4 2+2 3 2 - 1 6 7 √ - 8 - 2 2 √ √ LQFP48 -40 to +85
NANO100SE3BN 128 16 Configurable 4 52 4 2+3 3 2 - 1 8 7 √ - 8 - 2 3 √ √ LQFP64* -40 to +85
NANO100KE3BN 128 16 Configurable 4 86 4 2+3 3 2 - 1 8 12 √ √ 8 - 2 3 √ √ LQFP128 -40 to +85
LQFP64*: 7x7mm
●Nano100 Series
*Marked in the table (2+3) means 2 UART+ 3 ISO-7816 UART.*ISO-7816 UART supports half duplex mode.
Development Tools: NT-NUC200V (NUC200)Mass Production Programmer: NG-NUC200X; X stands for Package Code.
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity Com
parator
PWM(16-bit)
ADC(12-bit) RTC
PDM
A
LCD
ISO-7816-3*
ICPIAPISP
IRC10 kHz12 MHz16 MHz
PackageOperating
Temp. Range (°C )
UART*
SPII²C
NANO102ZB1AN 16 4 Configurable 4 27 4 2+1 2 2 2 4 2 √ 4 - 1 √ √ QFN33 -40 to +85
NANO102LB1AN 16 4 Configurable 4 40 4 2+2 2 2 2 4 7 √ 4 - 2 √ √ LQFP48 -40 to +85
NANO102ZC2AN 32 8 Configurable 4 27 4 2+1 2 2 2 4 2 √ 4 - 1 √ √ QFN33 -40 to +85
NANO102LC2AN 32 8 Configurable 4 40 4 2+2 2 2 2 4 7 √ 4 - 2 √ √ LQFP48 -40 to +85
NANO102SC2AN 32 8 Configurable 4 58 4 2+2 2 2 2 4 7 √ 4 - 2 √ √ LQFP64* -40 to +85
●Nano102 Series
*Marked in the table 2+2 means 2 UART + 2 ISO-7816 UART*ISO-7816 UART supports UART full duplex mode
Part No. Flash(Kbytes)
SRAM(Kbytes)
Data Flash(Kbytes)
KPROM(Kbytes)
ISP ROM(Kbytes) I/O
Timer(32-bit)
Connectivity
I²S PWMADC(12-bit)
ACM
P
RTC
IRC10 KHz4 MHz
12/16 MHz36 MHz
PDM
AISO
-7816-3*
ICPIAPISP
Package Operating Temp. Range (°C )
UART*
SPI
I²C
NANO103ZD3AE 64 16 Configurable 1 4 26 4 2+2 4 2 - 2 6 1 √ √ 4 2 √ QFN33 -40 to +105
NANO103LD3AE 64 16 Configurable 1 4 39 4 2+2 4 2 - 6 8 1 √ √ 4 2 √ LQFP48 -40 to +105
NANO103SD3AE 64 16 Configurable 1 4 53 4 2+2 4 2 - 6 8 1 √ √ 4 2 √ LQFP64* -40 to +105
●Nano103 Series
*Marked in the table (2+2) means 2 UART + 2 ISO-7816 UART*ISO-7816 UART supports UART full duplex mode*KRPOM stands for Key Protection ROM
LQFP64*: 7x7mm
LQFP64*: 7x7mm
Development Tools: NT-Nano102S (Nano102)/ NT-Nano112V (Nano102)Mass Production Programmer: NG-Nano102Z (Nano102Z)/ NG-Nano112L (Nano102L)/ NG-Nano112S (Nano102S)
Development Tools: NT-Nano103SMass Production Programmer: NLG-Nano103X (Nano103X); X stands for Package Code.
Ultra Low Power Line
NuM
icro® Fam
ily - Arm
® Cortex
®-M0 M
CU
s
14 15
Ultra Low
Power Line
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S
PWM
(16-bit)
ADC
(12-bit)
RTC
EBI
PDM
A
LCD
DAC
(12-bit)
ISO-7816-3*
ICPIAPISP
IRC10 kHz12 MHz
PackageOperating
Temp. Range (°C )
UART*
SPII²C
USB
NANO110SC2BN 32 8 Configurable 4 51 4 2+3 3 2 - 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64* -40 to +85
NANO110RC2BN 32 8 Configurable 4 51 4 2+3 3 2 - 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64 -40 to +85
NANO110KC2BN 32 8 Configurable 4 86 4 2+3 3 2 - 1 8 12 √ √ 8 4x40, 6x38 2 3 √ √ LQFP128 -40 to +85
NANO110SD2BN 64 8 Configurable 4 51 4 2+3 3 2 - 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64* -40 to +85
NANO110SD3BN 64 16 Configurable 4 51 4 2+3 3 2 - 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64* -40 to +85
NANO110RD2BN 64 8 Configurable 4 51 4 2+3 3 2 - 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64 -40 to +85
NANO110RD3BN 64 16 Configurable 4 51 4 2+3 3 2 - 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64 -40 to +85
NANO110KD2BN 64 8 Configurable 4 86 4 2+3 3 2 - 1 8 12 √ √ 8 4x40, 6x38 2 3 √ √ LQFP128 -40 to +85
NANO110KD3BN 64 16 Configurable 4 86 4 2+3 3 2 - 1 8 12 √ √ 8 4x40, 6x38 2 3 √ √ LQFP128 -40 to +85
NANO110SE3BN 128 16 Configurable 4 51 4 2+3 3 2 - 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64* -40 to +85
NANO110RE3BN 128 16 Configurable 4 51 4 2+3 3 2 - 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64 -40 to +85
NANO110KE3BN 128 16 Configurable 4 86 4 2+3 3 2 - 1 8 12 √ √ 8 4x40, 6x38 2 3 √ √ LQFP128 -40 to +85
●Nano110 Series
*Marked in the table (2+3) means 2 UART+ 3 ISO-7816 UART.*ISO-7816 UART supports half duplex mode.
Development Tools:NT-Nano130K (Nano110)Mass Production Programmer: NG-Nano100S (Nano110S/ NG-Nano100R (Nano110R)/ NG-Nano100K (Nano110K)
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity Com
parator
PWM(16-bit)
ADC(12-bit) RTC
PDM
A
LCD
ISO-7816-3*
ICPIAPISP
IRC10 kHz12 MHz16 MHz
PackageOperating
Temp. Range (°C )
UART*
SPI
I²C
NANO112LB1AN 16 4 Configurable 4 40 4 2+2 2 2 2 4 7 √ 4 4x20, 6x18 2 √ √ LQFP48 -40 to +85
NANO112SB1AN 16 4 Configurable 4 58 4 2+2 2 2 2 4 7 √ 4 4x32, 6x30 2 √ √ LQFP64* -40 to +85
NANO112RB1AN 16 4 Configurable 4 58 4 2+2 2 2 2 4 7 √ 4 4x32, 6x30 2 √ √ LQFP64 -40 to +85
NANO112LC2AN 32 8 Configurable 4 40 4 2+2 2 2 2 4 7 √ 4 4x20, 6x18 2 √ √ LQFP48 -40 to +85
NANO112SC2AN 32 8 Configurable 4 58 4 2+2 2 2 2 4 7 √ 4 4x32, 6x30 2 √ √ LQFP64* -40 to +85
NANO112RC2AN 32 8 Configurable 4 58 4 2+2 2 2 2 4 7 √ 4 4x32, 6x30 2 √ √ LQFP64 -40 to +85
NANO112VC2AN 32 8 Configurable 4 80 4 2+2 2 2 2 4 8 √ 4 4x36, 6x34 2 √ √ LQFP100 -40 to +85
●Nano112 Series
*Marked in the table (2+2) means 2 UART + 2 ISO-7816 UART *ISO-7816 UART supports UART full duplex mode
●Nano120 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S
PWM
(16-bit)
ADC
(12-bit)
RTC
EBI
PDM
A
LCD
DAC
(12-bit)
ISO-7816-3*
ICPIAPISP
IRC10 kHz12 MHz
PackageOperating
Temp. Range (°C )
UART*
SPII²C
USB
NANO120LC2BN 32 8 Configurable 4 34 4 2+2 3 2 1 1 4 7 √ - 8 - 2 2 √ √ LQFP48 -40 to +85
NANO120SC2BN 32 8 Configurable 4 48 4 2+3 3 2 1 1 8 7 √ - 8 - 2 3 √ √ LQFP64* -40 to +85
NANO120LD2BN 64 8 Configurable 4 34 4 2+2 3 2 1 1 4 7 √ - 8 - 2 2 √ √ LQFP48 -40 to +85
NANO120LD3BN 64 16 Configurable 4 34 4 2+2 3 2 1 1 4 7 √ - 8 - 2 2 √ √ LQFP48 -40 to +85
NANO120SD2BN 64 8 Configurable 4 48 4 2+3 3 2 1 1 8 7 √ - 8 - 2 3 √ √ LQFP64* -40 to +85
NANO120SD3BN 64 16 Configurable 4 48 4 2+3 3 2 1 1 8 7 √ - 8 - 2 3 √ √ LQFP64* -40 to +85
NANO120KD3BN 64 16 Configurable 4 86 4 2+3 3 2 1 1 8 8 √ √ 8 - 2 3 √ √ LQFP128 -40 to +85
NANO120LE3BN 128 16 Configurable 4 34 4 2+2 3 2 1 1 4 7 √ - 8 - 2 2 √ √ LQFP48 -40 to +85
NANO120SE3BN 128 16 Configurable 4 48 4 2+3 3 2 1 1 8 7 √ - 8 - 2 3 √ √ LQFP64* -40 to +85
NANO120KE3BN 128 16 Configurable 4 86 4 2+3 3 2 1 1 8 8 √ √ 8 - 2 3 √ √ LQFP128 -40 to +85
*Marked in the table (2+3) means 2 UART+ 3 ISO-7816 UART. *ISO-7816 UART supports half duplex mode.
Development Tools: NT-Nano112VMass Production Programmer: NG-Nano112V/ NG-Nano112L / NG-Nano112S
Development Tools: NT-Nano120K/ NT-Nano130K (Nano120)Mass Production Programmer: NG-Nano100L (Nano120L)/ NG-Nano100S (Nano120S)/ NG-Nano100K (Nano120K)
LQFP64*: 7x7mm
LQFP64*: 7x7mm
LQFP64*: 7x7mm
NuM
icro® Fam
ily - Arm
® Cortex
®-M0 M
CU
s
14 15
●Nano130 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S
PWM
(16-bit)
ADC
(12-bit)
RTC
EBI
PDM
A
LCD
DAC
(12-bit)
ISO-7816-3*
ICPIAPISP
IRC10 kHz12 MHz
PackageOperating
Temp. Range (°C )
UART*
SPII²C
USB
NANO130SC2BN 32 8 Configurable 4 47 4 2+3 3 2 1 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64* -40 to +85
NANO130KC2BN 32 8 Configurable 4 86 4 2+3 3 2 1 1 8 8 √ √ 8 4x40, 6x38 2 3 √ √ LQFP128 -40 to +85
NANO130SD2BN 64 8 Configurable 4 47 4 2+3 3 2 1 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64* -40 to +85
NANO130SD3BN 64 16 Configurable 4 47 4 2+3 3 2 1 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64* -40 to +85
NANO130KD2BN 64 8 Configurable 4 86 4 2+3 3 2 1 1 8 8 √ √ 8 4x40, 6x38 2 3 √ √ LQFP128 -40 to +85
NANO130KD3BN 64 16 Configurable 4 86 4 2+3 3 2 1 1 8 8 √ √ 8 4x40, 6x38 2 3 √ √ LQFP128 -40 to +85
NANO130SE3BN 128 16 Configurable 4 47 4 2+3 3 2 1 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64* -40 to +85
NANO130KE3BN 128 16 Configurable 4 86 4 2+3 3 2 1 1 8 8 √ √ 8 4x40, 6x38 2 3 √ √ LQFP128 -40 to +85
*Marked in the table (2+3) means 2 UART+ 3 ISO-7816 UART.*ISO-7816 UART supports half duplex mode.
Development Tools: NT-Nano130KMass Production Programmer: NG-Nano100S (Nano130S)/ NG-Nano100K (Nano130K)
LQFP64*: 7x7mm
Ultra Low
Power Line
NuM
icro® Fam
ily - Arm
® Cortex
®-M0 M
CU
s
16 17
USB
Line
●Nano120 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S
PWM
(16-bit)
ADC
(12-bit)
RTC
EBI
PDM
A
LCD
DAC
(12-bit)
ISO-7816-3*
ICPIAPISP
IRC10 kHz12 MHz
PackageOperating
Temp. Range (°C )
UART*
SPII²C
USB
NANO120LC2BN 32 8 Configurable 4 34 4 2+2 3 2 1 1 4 7 √ - 8 - 2 2 √ √ LQFP48 -40 to +85
NANO120SC2BN 32 8 Configurable 4 48 4 2+3 3 2 1 1 8 7 √ - 8 - 2 3 √ √ LQFP64* -40 to +85
NANO120LD2BN 64 8 Configurable 4 34 4 2+2 3 2 1 1 4 7 √ - 8 - 2 2 √ √ LQFP48 -40 to +85
NANO120LD3BN 64 16 Configurable 4 34 4 2+2 3 2 1 1 4 7 √ - 8 - 2 2 √ √ LQFP48 -40 to +85
NANO120SD2BN 64 8 Configurable 4 48 4 2+3 3 2 1 1 8 7 √ - 8 - 2 3 √ √ LQFP64* -40 to +85
NANO120SD3BN 64 16 Configurable 4 48 4 2+3 3 2 1 1 8 7 √ - 8 - 2 3 √ √ LQFP64* -40 to +85
NANO120KD3BN 64 16 Configurable 4 86 4 2+3 3 2 1 1 8 8 √ √ 8 - 2 3 √ √ LQFP128 -40 to +85
NANO120LE3BN 128 16 Configurable 4 34 4 2+2 3 2 1 1 4 7 √ - 8 - 2 2 √ √ LQFP48 -40 to +85
NANO120SE3BN 128 16 Configurable 4 48 4 2+3 3 2 1 1 8 7 √ - 8 - 2 3 √ √ LQFP64* -40 to +85
NANO120KE3BN 128 16 Configurable 4 86 4 2+3 3 2 1 1 8 8 √ √ 8 - 2 3 √ √ LQFP128 -40 to +85
LQFP64*: 7x7mm*Marked in the table (2+3) means 2 UART+ 3 ISO-7816 UART.*ISO-7816 UART supports half duplex mode.Development Tools: NT-Nano120K/ NT-Nano130K (Nano120)Mass Production Programmer: NG-Nano100L (Nano120L)/ NG-Nano100S (Nano120S)/ NG-Nano100K (Nano120K)
●Nano130 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S
PWM
(16-bit)
ADC
(12-bit)
RTC
EBI
PDM
A
LCD
DAC
(12-bit)
ISO-7816-3*
ICPIAPISP
IRC10 kHz12 MHz
PackageOperating
Temp. Range (°C )
UART*
SPII²C
USB
NANO130SC2BN 32 8 Configurable 4 47 4 2+3 3 2 1 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64* -40 to +85
NANO130KC2BN 32 8 Configurable 4 86 4 2+3 3 2 1 1 8 8 √ √ 8 4x40, 6x38 2 3 √ √ LQFP128 -40 to +85
NANO130SD2BN 64 8 Configurable 4 47 4 2+3 3 2 1 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64* -40 to +85
NANO130SD3BN 64 16 Configurable 4 47 4 2+3 3 2 1 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64* -40 to +85
NANO130KD2BN 64 8 Configurable 4 86 4 2+3 3 2 1 1 8 8 √ √ 8 4x40, 6x38 2 3 √ √ LQFP128 -40 to +85
NANO130KD3BN 64 16 Configurable 4 86 4 2+3 3 2 1 1 8 8 √ √ 8 4x40, 6x38 2 3 √ √ LQFP128 -40 to +85
NANO130SE3BN 128 16 Configurable 4 47 4 2+3 3 2 1 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64* -40 to +85
NANO130KE3BN 128 16 Configurable 4 86 4 2+3 3 2 1 1 8 8 √ √ 8 4x40, 6x38 2 3 √ √ LQFP128 -40 to +85
*Marked in the table (2+3) means 2 UART+ 3 ISO-7816 UART.*ISO-7816 UART supports half duplex mode.
● NUC120 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S PWM(16-bit)
ADC(12-bit)
Com
parator
RTC EBI PDMA ISO-7816-3
ICPIAPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )
UARTSPII²C
USBLIN
CAN
NUC120LC1DN 32 4 4 4 33 4 2 1 2 1 - - 1 4 8 1 √ - 9 3 √ √ LQFP48 -40 to +85
NUC120RC1DN 32 4 4 4 47 4 2 2 2 1 - - 1 6 8 2 √ √ 9 3 √ √ LQFP64 -40 to +85
NUC120LD2DN 64 8 4 4 33 4 2 1 2 1 - - 1 4 8 1 √ - 9 3 √ √ LQFP48 -40 to +85
NUC120RD2DN 64 8 4 4 47 4 2 2 2 1 - - 1 6 8 2 √ √ 9 3 √ √ LQFP64 -40 to +85
NUC120LE3DN 128 16 Configurable 4 33 4 2 1 2 1 - - 1 4 8 1 √ - 9 3 √ √ LQFP48 -40 to +85
NUC120RE3DN 128 16 Configurable 4 47 4 2 2 2 1 - - 1 6 8 2 √ √ 9 3 √ √ LQFP64 -40 to +85
NUC120VE3DN 128 16 Configurable 4 80 4 3 4 2 1 - - 1 8 8 2 √ √ 9 3 √ √ LQFP100 -40 to +85
Development Tools: NT-Nano120K/ NT-Nano130K (Nano120)Mass Production Programmer: NG-Nano100L (Nano120L)/ NG-Nano100S (Nano120S)/ NG-Nano100K (Nano120K)
Development Tools: NT-NUC120VMass Production Programmer: NG-NUC100X (NG-NUC100X) ; X stands for Package Code.
LQFP64*: 7x7mm
USB Line
NuM
icro® Fam
ily - Arm
® Cortex
®-M0 M
CU
s
16 17
USB
Line
● NUC121 Series
● NUC122 Series
Part No. Flash(Kbytes)
SRAM(Kbytes)
ISP ROM
(Kbytes)
SPROM(Kbytes) I/O Timer
Connectivity
PWM ADC(12-bit) PDMA
ICPIAPISP
IRC10 kHz48 MHz
PackageOperating
Temp. Range (°C )
USC
I*U
ARTSPI/I²S I²CU
SBD
NUC121ZC2AE 32 8 4.5 05 22 4 1 1 1 2 1 17 4-ch 5-ch √ √ QFN33 -40 to +105
NUC121LC2AE 32 8 4.5 0.5 38 4 1 1 1 2 1 24 10-ch 5-ch √ √ LQFP48 -40 to +105
NUC121SC2AE 32 8 4.5 0.5 52 4 1 1 1 2 1 24 12-ch 5-ch √ √ LQFP64 -40 to +105
Part No. Flash(Kbytes)
SRAM(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
PS2 I²S Comp. PWM(16-bit)
ICPIAPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )
UARTSPII²C
USBLIN
CAN
NUC121ZC2AE 32 4 4 18 4 1 2 1 1 - - - - - - √ √ QFN33 -40 to +85
NUC122LC1DN 32 4 4 30 4 2 2 1 1 - - 1 - - 4 √ √ LQFP48 -40 to +85
NUC122SC1DN 32 4 4 30 4 2 2 1 1 - - 1 - - 4 √ √ LQFP64* -40 to +85
NUC122ZD2DN 64 8 4 18 4 1 2 1 1 - - - - - - √ √ QFN33 -40 to +105
NUC122LD2DN 64 8 4 30 4 2 2 1 1 - - 1 - - 4 √ √ LQFP48 -40 to +105
NUC122SD2DN 64 8 4 30 4 2 2 1 1 - - 1 - - 4 √ v LQFP64* -40 to +105
*USCI can be set to UART, SPI or I²C.Development Tools: NT-NUC121SMass Production Programmer: NLG-NUC121X (NUC121X); X stands for Package Code.
Development Tools: NT-NUC122SMass Production Programmer: NG-NUC122L
LQFP64*: 7x7mm
LQFP64*: 7x7mm
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data FlashISP
ROM(Kbytes) I/O
Timer
(32-bit)Connectivity
PS2
I²S
Com
p.
PWM
(16-bit)
ADC
(10-bit)
RTC
PDM
A
CR
C
ICPIAPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )
UARTSPII²C
USBLIN
CAN
NUC123ZC2AN1 36 12 Configurable 4 20 4 1 3 1 1 - - - 1 - 2 3 - 6 √ √ √ QFN33 -40 to +85
NUC123LC2AN1 36 12 Configurable 4 36 4 2 3 2 1 - - 1 1 - 4 8 - 6 √ √ √ LQFP48 -40 to +85
NUC123SC2AN1 36 12 Configurable 4 47 4 2 3 2 1 - - 1 1 - 4 8 - 6 √ √ √ LQFP64* -40 to +85
NUC123ZC2AE1 36 12 Configurable 4 20 4 1 3 1 1 - - - 1 - 3 3 - 6 √ √ √ QFN33 -40 to +105
NUC123LC2AE1 36 12 Configurable 4 36 4 2 3 2 1 - - 1 1 - 4 8 - 6 √ √ √ LQFP48 -40 to +105
NUC123SC2AE1 36 12 Configurable 4 47 4 2 3 2 1 - - 1 1 - 4 8 - 6 √ √ √ LQFP64* -40 to +105
NUC123ZD4AN0 68 20 Configurable 4 20 4 1 3 1 1 - - - 1 - 2 3 - 6 √ √ √ QFN33 -40 to +85
NUC123LD4AN0 68 20 Configurable 4 36 4 2 3 2 1 - - 1 1 - 4 8 - 6 √ √ √ LQFP48 -40 to +85
NUC123SD4AN0 68 20 Configurable 4 47 4 2 3 2 1 - - 1 1 - 4 8 - 6 √ √ √ LQFP64* -40 to +85
NUC123ZD4AE0 68 20 Configurable 4 20 4 1 3 1 1 - - - 1 - 3 3 - 6 √ √ √ QFN33 -40 to +105
NUC123LD4AE0 68 20 Configurable 4 36 4 2 3 2 1 - - 1 1 - 4 8 - 6 √ √ √ LQFP48 -40 to +105
NUC123SD4AE0 68 20 Configurable 4 47 4 2 3 2 1 - - 1 1 - 4 8 - 6 √ √ √ LQFP64* -40 to +105
Part No. Flash (Kbytes)
SRAM (Kbytes)
LDROM(Kbytes)
SPROM(Kbytes) I/O Timer VDDIO
(1.8V-5.5V)
ConnectivityPWM ADC
(12-bit) PDMAICPIAPISP
IRC10 kHz48 MHz
PackageOperating
Temp. Range (°C )USCI* UART SPI/
I²S I²C USBD
NUC125ZC2AE 32 8 4.5 0.5 22 4 √ 1 1 1 2 1 17 4-ch 5-ch √ √ QFN33 -40 to +105
NUC125LC2AE 32 8 4.5 0.5 37 4 √ 1 1 1 2 1 23 10-ch 5-ch √ √ LQFP48 -40 to +105
NUC125SC2AE 32 8 4.5 0.5 51 4 √ 1 1 1 2 1 23 12-ch 5-ch √ √ LQFP64* -40 to +105
● NUC123 Series
● NUC125 Series
*USCI can be set to UART, SPI or I²C.
Development Tools: NT-NUC123S (NUC123)Mass Production Programmer: NG-NUC123X (NUC123X); X stands for Package Code.
LQFP64*: 7x7mm
Development Tools: NT-NUC125SMass Production Programmer: NLG-NUC125X (NUC125X); X stands for Package Code.
LQFP64*: 7x7mm
NuM
icro® Fam
ily - Arm
® Cortex
®-M0 M
CU
s
18 19
● NUC140 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S PWM(16-bit)
ADC(12-bit)
Com
parator
RTC
EBI
PDM
A
ICPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )
UART
SPII²C
USBLIN
CAN
NUC140LC1CN 32 4 4 4 31 4 2 1 2 1 2 1 1 4 8 1 √ - 9 √ √ LQFP48 -40 to +85
NUC140RC1CN 32 4 4 4 45 4 3 2 2 1 2 1 1 4 8 2 √ √ 9 √ √ LQFP64 -40 to +85
NUC140LD2CN 64 8 4 4 31 4 2 1 2 1 2 1 1 4 8 1 √ - 9 √ √ LQFP48 -40 to +85
NUC140RD2CN 64 8 4 4 45 4 3 2 2 1 2 1 1 4 8 2 √ √ 9 √ √ LQFP64 -40 to +85
NUC140LE3CN 128 16 Configurable 4 31 4 2 1 2 1 2 1 1 4 8 1 √ - 9 √ √ LQFP48 -40 to +85
NUC140RE3CN 128 16 Configurable 4 45 4 3 2 2 1 2 1 1 4 8 2 √ √ 9 √ √ LQFP64 -40 to +85
NUC140VE3CN 128 16 Configurable 4 76 4 3 4 2 1 2 1 1 8 8 2 √ √ 9 √ √ LQFP100 -40 to +85
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
SPROM(Kbytes)
ISP ROM
(Kbytes)I/O Tim
er /PW
M
PWM
Connectivity
ADC(12-bit)
ACM
PPD
MA
RTC(V
BAT)
VD
DIO
(1.8V-5.5V)
EBI
ICPIAPISP
IRC10 kHz22 MHz48 MHz
PackageOperating
Temp. Range (°C )
USBD
USC
I*U
ART
ISO-
7816-3*
SPI/I²S I²C
NUC126LE4AE 128 20 Configurable 2 4 35 4 10 1 3 3 2 2 2 9-ch 2 5 - √ √ √ √ LQFP48 -40 to +105
NUC126SE4AE 128 20 Configurable 2 4 49 4 12 1 3 3 2 2 2 15-ch 2 5 √ √ √ √ √ LQFP64* -40 to +105
NUC126LG4AE 256 20 Configurable 2 4 35 4 10 1 3 3 2 2 2 9-ch 2 5 - √ √ √ √ LQFP48 -40 to +105
NUC126SG4AE 256 20 Configurable 2 4 49 4 12 1 3 3 2 2 2 15-ch 2 5 √ √ √ √ √ LQFP64* -40 to +105
NUC126VG4AE 256 20 Configurable 2 4 81 4 12 1 3 3 2 2 2 20-ch 2 5 √ √ √ √ √ LQFP100 -40 to +105
● NUC126 Series
*USCI can be set to UART, SPI or I²C.*ISO-7816 UART supports full duplex mode.Development Tools: NT-NUC126VMass Production Programmer: NLG-NUC126X (NUC126X) ; X stands for Package Code.
LQFP64*: 7x7mm
Development Tools: NT-NUC140VMass Production Programmer: NG-NUC100X (NG-NUC100X) ; X stands for Package Code.
● NUC220 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S PWM(16-bit)
ADC(12-bit)
Com
parator
PDM
A
ISO-7816-3*
CR
C
RTC(V
BAT)
ICPIAPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )
UARTSPII²C
USBLIN
CAN
NUC220LC2AN 32 8 4 4 31 4 2 1 2 1 - - 1 4 7 1 9 2 √ √ √ √ LQFP48 -40 to +85
NUC220SC2AN 32 8 4 4 45 4 2 2 2 1 - - 1 6 7 2 9 2 √ √ √ √ LQFP64* -40 to +85
NUC220LD2AN 64 8 4 4 31 4 2 1 2 1 - - 1 4 7 1 9 2 √ √ √ √ LQFP48 -40 to +85
NUC220SD2AN 64 8 4 4 45 4 2 2 2 1 - - 1 6 7 2 9 2 √ √ √ √ LQFP64* -40 to +85
NUC220LE3AN 128 16 Configurable 4 31 4 2 1 2 1 - - 1 4 7 1 9 2 √ √ √ √ LQFP48 -40 to +85
NUC220SE3AN 128 16 Configurable 4 45 4 2 2 2 1 - - 1 6 7 2 9 2 √ √ √ √ LQFP64* -40 to +85
NUC220VE3AN 128 16 Configurable 4 79 4 3 4 2 1 - - 1 8 8 2 9 3 √ √ √ √ LQFP100 -40 to +85
● NUC240 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S PWM(16-bit)
ADC(12-bit)
Com
parator
PDM
A
ISO-7816-3*
CR
C
RTC(V
BAT)
ICPIAPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )
UART*
SPII²C
USBLIN
CAN
NUC240LC2AE 32 8 4 8 31 4 2+2 1 2 1 2 2 1 4 7 1 9 1 √ √ √ √ LQFP48 -40 to +105
NUC240SC2AE 32 8 4 8 45 4 3+2 2 2 1 3 2 1 4 7 2 9 2 √ √ √ √ LQFP64* -40 to +105
NUC240LD2AE 64 8 4 8 31 4 2+2 1 2 1 2 2 1 4 7 1 9 1 √ √ √ √ LQFP48 -40 to +105
NUC240SD2AE 64 8 4 8 45 4 3+2 2 2 1 3 2 1 4 7 2 9 2 √ √ √ √ LQFP64* -40 to +105
NUC240LE3AE 128 16 Configurable 8 31 4 2+2 1 2 1 2 2 1 4 7 1 9 1 √ √ √ √ LQFP48 -40 to +105
NUC240SE3AE 128 16 Configurable 8 45 4 3-2 2 2 1 3 2 1 4 7 2 9 2 √ √ √ √ LQFP64* -40 to +105
NUC240VE3AE 128 16 Configurable 8 79 4 3+3 4 2 1 3 2 1 8 8 2 9 3 √ √ √ √ LQFP100 -40 to +105
*Marked in the table (2+3) means 2 UART+ 3 ISO-7816 UART.*ISO-7816 UART supports half duplex mode.
*ISO-7816 UART supports half duplex mode.Development Tools: NT-NUC220V (NUC220)Mass Production Programmer: NG-NUC220X; X stands for Package Code.
LQFP64*: 7x7mm
LQFP64*: 7x7mm
USB
Line
NuM
icro® Fam
ily - Arm
® Cortex
®-M0 M
CU
s
18 19
CAN Line
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S PWM(16-bit)
ADC(12-bit)
Com
parator
RTC
EBI
PDM
A
ISO-7816-3*
ICPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )
UARTSPII²C
USBLIN
CAN
NUC130LC1CN 32 4 4 4 35 4 3 1 2 - 2 1 1 4 8 1 √ - 9 - √ √ LQFP48 -40 to +85
NUC130RC1CN 32 4 4 4 49 4 3 2 2 - 2 1 1 6 8 2 √ √ 9 - √ √ LQFP64 -40 to +85
NUC130LD2CN 64 8 4 4 35 4 3 1 2 - 2 1 1 4 8 1 √ - 9 - √ √ LQFP48 -40 to +85
NUC130RD2CN 64 8 4 4 49 4 3 2 2 - 2 1 1 6 8 2 √ √ 9 - √ √ LQFP64 -40 to +85
NUC130LE3CN 128 16 Configurable 4 35 4 3 1 2 - 2 1 1 4 8 1 √ - 9 - √ √ LQFP48 -40 to +85
NUC130RE3CN 128 16 Configurable 4 49 4 3 2 2 - 2 1 1 6 8 2 √ √ 9 - √ √ LQFP64 -40 to +85
NUC130VE3CN 128 16 Configurable 4 80 4 3 4 2 - 2 1 1 8 8 2 √ √ 9 - √ √ LQFP100 -40 to +85
● NUC130 Series
● NUC131 Series
Part No. Flash (Kbytes)
SRAM (Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
ConnectivityPWM
(16-bit)ADC
(12-bit)
ICPIAPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )UART SPI I²C LIN CAN
NUC131LC2AE 36 8 Configurable 4 42 4 6 1 2 3 1 24 8 √ √ LQFP48 -40 to +105
NUC131SC2AE 36 8 Configurable 4 56 4 6 1 2 3 1 24 8 √ √ LQFP64* -40 to +105
NUC131LD2AE 68 8 Configurable 4 42 4 6 1 2 3 1 24 8 √ √ LQFP48 -40 to +105
NUC131SD2AE 68 8 Configurable 4 56 4 6 1 2 3 1 24 8 √ √ LQFP64* -40 to +105
LQFP64*: 7x7mm
*ISO-7816 UART supports half duplex mode.
● NUC140 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S PWM(16-bit)
ADC(12-bit)
Com
parator
RTC
EBI
PDM
A
ICPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )
UART
SPII²C
USBLIN
CAN
NUC140LC1CN 32 4 4 4 31 4 2 1 2 1 2 1 1 4 8 1 √ - 9 √ √ LQFP48 -40 to +85
NUC140RC1CN 32 4 4 4 45 4 3 2 2 1 2 1 1 4 8 2 √ √ 9 √ √ LQFP64 -40 to +85
NUC140LD2CN 64 8 4 4 31 4 2 1 2 1 2 1 1 4 8 1 √ - 9 √ √ LQFP48 -40 to +85
NUC140RD2CN 64 8 4 4 45 4 3 2 2 1 2 1 1 4 8 2 √ √ 9 √ √ LQFP64 -40 to +85
NUC140LE3CN 128 16 Configurable 4 31 4 2 1 2 1 2 1 1 4 8 1 √ - 9 √ √ LQFP48 -40 to +85
NUC140RE3CN 128 16 Configurable 4 45 4 3 2 2 1 2 1 1 4 8 2 √ √ 9 √ √ LQFP64 -40 to +85
NUC140VE3CN 128 16 Configurable 4 76 4 3 4 2 1 2 1 1 8 8 2 √ √ 9 √ √ LQFP100 -40 to +85
● NUC230 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S PWM(16-bit)
ADC(12-bit)
Com
parator
PDM
A
ISO-7816-3*
CR
C
RTC(V
BAT)
ICPIAPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )
UART*
SPII²C
USBLIN
CAN
NUC230LC2AE 32 8 4 8 35 4 3+2 1 2 - 3 2 1 4 7 1 9 2 √ √ √ √ LQFP48 -40 to +105
NUC230SC2AE 32 8 4 8 49 4 3+2 2 2 - 3 2 1 6 7 2 9 2 √ √ √ √ LQFP64* -40 to +105
NUC230LD2AE 64 8 4 8 35 4 3+2 1 2 - 3 2 1 4 7 1 9 2 √ √ √ √ QFN48 -40 to +105
NUC230SD2AE 64 8 4 8 49 4 3+2 2 2 - 3 2 1 6 7 2 9 2 √ √ √ √ LQFP64* -40 to +105
NUC230LE3AE 128 16 Configurable 8 35 4 3+2 1 2 - 3 2 1 4 7 1 9 2 √ √ √ √ LQFP48 -40 to +105
NUC230SE3AE 128 16 Configurable 8 49 4 3+2 2 2 - 3 2 1 6 7 2 9 2 √ √ √ √ LQFP64* -40 to +105
NUC230VE3AE 128 16 Configurable 8 83 4 3+3 4 2 - 3 2 1 8 8 2 9 3 √ √ √ √ LQFP100 -40 to +105
LQFP64*: 7x7mm*Marked in the table (2+3) means 2 UART+ 3 ISO-7816 UART.*ISO-7816 UART supports half duplex mode.
CAN
Line
NuM
icro® Fam
ily - Arm
® Cortex
®-M0 M
CU
s
20 21
● NUC240 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S PWM(16-bit)
ADC(12-bit)
Com
parator
PDM
A
ISO-7816-3*
CR
C
RTC(V
BAT)
ICPIAPISP
IRC10 kHz22 MHz
PackageOperating
Temp. Range (°C )
UART*
SPII²C
USBLIN
CAN
NUC240LC2AE 32 8 4 8 31 4 2+2 1 2 1 2 2 1 4 7 1 9 1 √ √ √ √ LQFP48 -40 to +105
NUC240SC2AE 32 8 4 8 45 4 3+2 2 2 1 3 2 1 4 7 2 9 2 √ √ √ √ LQFP64* -40 to +105
NUC240LD2AE 64 8 4 8 31 4 2+2 1 2 1 2 2 1 4 7 1 9 1 √ √ √ √ LQFP48 -40 to +105
NUC240SD2AE 64 8 4 8 45 4 3+2 2 2 1 3 2 1 4 7 2 9 2 √ √ √ √ LQFP64* -40 to +105
NUC240LE3AE 128 16 Configurable 8 31 4 2+2 1 2 1 2 2 1 4 7 1 9 1 √ √ √ √ LQFP48 -40 to +105
NUC240SE3AE 128 16 Configurable 8 45 4 3-2 2 2 1 3 2 1 4 7 2 9 2 √ √ √ √ LQFP64* -40 to +105
NUC240VE3AE 128 16 Configurable 8 79 4 3+3 4 2 1 3 2 1 8 8 2 9 3 √ √ √ √ LQFP100 -40 to +105LQFP64*: 7x7mm*Marked in the table (2+3) means 2 UART+ 3 ISO-7816 UART.
*ISO-7816 UART supports half duplex mode.
CAN
Line
NuM
icro® Fam
ily - Arm
® Cortex
®-M0 M
CU
s
20 21
LCD Line
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S
PWM
(16-bit)
ADC
(12-bit)
RTC
EBI
PDM
A
LCD
DAC
(12-bit)
ISO-7816-3*
ICPIAPISP
IRC10 kHz12 MHz
PackageOperating
Temp. Range (°C )
UART*
SPII²C
USB
NANO110SC2BN 32 8 Configurable 4 51 4 2+3 3 2 - 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64* -40 to +85
NANO110RC2BN 32 8 Configurable 4 51 4 2+3 3 2 - 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64 -40 to +85
NANO110KC2BN 32 8 Configurable 4 86 4 2+3 3 2 - 1 8 12 √ √ 8 4x40, 6x38 2 3 √ √ LQFP128 -40 to +85
NANO110SD2BN 64 8 Configurable 4 51 4 2+3 3 2 - 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64* -40 to +85
NANO110SD3BN 64 16 Configurable 4 51 4 2+3 3 2 - 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64* -40 to +85
NANO110RD2BN 64 8 Configurable 4 51 4 2+3 3 2 - 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64 -40 to +85
NANO110RD3BN 64 16 Configurable 4 51 4 2+3 3 2 - 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64 -40 to +85
NANO110KD2BN 64 8 Configurable 4 86 4 2+3 3 2 - 1 8 12 √ √ 8 4x40, 6x38 2 3 √ √ LQFP128 -40 to +85
NANO110KD3BN 64 16 Configurable 4 86 4 2+3 3 2 - 1 8 12 √ √ 8 4x40, 6x38 2 3 √ √ LQFP128 -40 to +85
NANO110SE3BN 128 16 Configurable 4 51 4 2+3 3 2 - 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64* -40 to +85
NANO110RE3BN 128 16 Configurable 4 51 4 2+3 3 2 - 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64 -40 to +85
NANO110KE3BN 128 16 Configurable 4 86 4 2+3 3 2 - 1 8 12 √ √ 8 4x40, 6x38 2 3 √ √ LQFP128 -40 to +85
LQFP64*: 7x7mm
●Nano110 Series
*Marked in the table (2+3) means 2 UART+ 3 ISO-7816 UART.*ISO-7816 UART supports half duplex mode.
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity Com
parator
PWM(16-bit)
ADC(12-bit) RTC
PDM
A
LCD
ISO-7816-3*
ICPIAPISP
IRC10 kHz12 MHz16 MHz
PackageOperating
Temp. Range (°C )
UART*
SPI
I²C
NANO112LB1AN 16 4 Configurable 4 40 4 2+2 2 2 2 4 7 √ 4 4x20, 6x18 2 √ √ LQFP48 -40 to +85
NANO112SB1AN 16 4 Configurable 4 58 4 2+2 2 2 2 4 7 √ 4 4x32, 6x30 2 √ √ LQFP64* -40 to +85
NANO112RB1AN 16 4 Configurable 4 58 4 2+2 2 2 2 4 7 √ 4 4x32, 6x30 2 √ √ LQFP64 -40 to +85
NANO112LC2AN 32 8 Configurable 4 40 4 2+2 2 2 2 4 7 √ 4 4x20, 6x18 2 √ √ LQFP48 -40 to +85
NANO112SC2AN 32 8 Configurable 4 58 4 2+2 2 2 2 4 7 √ 4 4x32, 6x30 2 √ √ LQFP64* -40 to +85
NANO112RC2AN 32 8 Configurable 4 58 4 2+2 2 2 2 4 7 √ 4 4x32, 6x30 2 √ √ LQFP64 -40 to +85
NANO112VC2AN 32 8 Configurable 4 80 4 2+2 2 2 2 4 8 √ 4 4x36, 6x34 2 √ √ LQFP100 -40 to +85
●Nano112 Series
*2+2 stands for UART*2 + ISO-7816 UART*2*ISO-7816 UART supports UART full duplex mode
●Nano130 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Timer
(32-bit)
Connectivity
I²S
PWM
(16-bit)
ADC
(12-bit)
RTC
EBI
PDM
A
LCD
DAC
(12-bit)
ISO-7816-3*
ICPIAPISP
IRC10 kHz12 MHz
PackageOperating
Temp. Range (°C )
UART*
SPII²C
USB
NANO130SC2BN 32 8 Configurable 4 47 4 2+3 3 2 1 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64* -40 to +85
NANO130KC2BN 32 8 Configurable 4 86 4 2+3 3 2 1 1 8 8 √ √ 8 4x40, 6x38 2 3 √ √ LQFP128 -40 to +85
NANO130SD2BN 64 8 Configurable 4 47 4 2+3 3 2 1 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64* -40 to +85
NANO130SD3BN 64 16 Configurable 4 47 4 2+3 3 2 1 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64* -40 to +85
NANO130KD2BN 64 8 Configurable 4 86 4 2+3 3 2 1 1 8 8 √ √ 8 4x40, 6x38 2 3 √ √ LQFP128 -40 to +85
NANO130KD3BN 64 16 Configurable 4 86 4 2+3 3 2 1 1 8 8 √ √ 8 4x40, 6x38 2 3 √ √ LQFP128 -40 to +85
NANO130SE3BN 128 16 Configurable 4 47 4 2+3 3 2 1 1 7 7 √ - 8 4x31, 6x29 2 3 √ √ LQFP64* -40 to +85
NANO130KE3BN 128 16 Configurable 4 86 4 2+3 3 2 1 1 8 8 √ √ 8 4x40, 6x38 2 3 √ √ LQFP128 -40 to +85
LQFP64*: 7x7mm*Marked in the table (2+3) means 2 UART+ 3 ISO-7816 UART.*ISO-7816 UART supports half duplex mode.
Development Tools:NT-Nano130K (Nano110)Mass Production Programmer: NG-Nano100S (Nano110S/ NG-Nano100R (Nano110R)/ NG-Nano100K (Nano110K)
Development Tools: NT-Nano112VMass Production Programmer: NG-Nano112V/ NG-Nano112L / NG-Nano112S
Development Tools: NT-Nano130KMass Production Programmer: NG-Nano100S (Nano130S)/ NG-Nano100K (Nano130K)
LCD
Line
NuM
icro® Fam
ily - Arm
® Cortex
®-M4 M
CU
s
22 23
NuMicro® Family Arm® Cortex®-M4 MCUsNuvoton provides the cutting-edge 32-bit NuMicro® M4 family powered by the Cortex®-M4F core with FPU (Floating Point Unit) function. It is specially developed to fulfill high-end digital signal control markets which demands easy-to-use microcontrollers with high performance and excellent power efficiency. The NuMicro® M4 family offers superior features and supports wide operating voltage from 2.5V to 5.5V, industrial operating temperature from -40°C to 105°C, high accuracy oscillator and high immunity (8KV ESD, 4KV EFT).
According to its applications and functionalities, the NuMicro M4 Family is further divided into different product lines:
Base Line The product line consists of cost-effective Arm® Cortex®-M4F core MCUs with uncompromised performance. Its MCUs operates at up to 72 MHz and integrates digital and analog peripherals such as UART, SPI, I²C, ADC and DAC.
USB LineThe USB line supports USB 2.0 connection and various operation modes including device mode, host mode and OTG mode. The USB 2.0 full speed/high speed OTG transceivers are also integrated. The product line includes the M482 series which supports crystal-less USB 2.0 full speed function under device mode.
CAN LineThis product line provides CAN (Controller Area Network) bus interface which can be applied to automotive, building automatic and industrial applications. The CAN interface is fully compliant with the BOSCH® CAN Specification 2.0.
Crypto Line The Crypto line supports hardware cryptography engine and random number generator. The cryptography engine efficiently accelerates the processing speed of Elliptic Curve, AES, DES, Triple DES, SHA and HMAC.
Ethernet Line The Audio Codec line provides on-chip 24-bit audio codec with 512/2048 KB Flash, 128 KB SRAM and operates at up to 100 MHz. The NUC505 series is an excellent single chip solution for a wide range of audio applications.
Audio Codec Line The LCD line supports Com/Seg LCD interface. The built-in LCD controller support resolutions from 4x20 to 6x38.
High Performance Line The High Performance line delivers powerful 32-bit NuMicro® MCU - the NuMicro M480 series. The M480 series can run up to 192 MHz and operates between 1.62V and 3.63V. It offers high-performance digital and analog peripherals and many other outstanding features such as 32 KB cache to speed up the execution from external SPI Flash, and factory pre-loaded boot loader for Secure Boot.
The NuMicro® M4 Family is ideal for industrial control systems, industrial automation, consumer products, embedded network control, energy power systems, motor control, etc.
NuM
icro® Fam
ily - Arm
® Cortex
®-M4 M
CU
s
22 23
Base Line
Base Line●M451 Series
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/O
Timer (32-bit)
Connectivity
EBII²S
USB O
TG
USB D
evice
PWM
(16-bit)*Analog C
omp.
DAC(12-bit)
ADC(12-bit)
VAI
RTC (V
BAT)
ICPIAPISP
PackageOperating
Temp. Range (°C )
UART*
ISO-7816-3*
SPII²C
CANLIN
M451LC3AE 40 16 Configurable 4 8 39 4 4+1 1 2 2 - 2 √ 1 - - 12 2 1 10-ch √ √ √ LQFP48 -40 to +105
M451RC3AE 40 16 Configurable 4 8 53 4 4+1 1 2 2 - 2 √ 1 - - 12 2 1 16-ch √ √ √ LQFP64 -40 to +105
M451LD3AE 72 16 Configurable 4 8 39 4 4+1 1 2 2 - 2 √ 1 - - 12 2 1 10-ch √ √ √ LQFP48 -40 to +105
M451RD3AE 72 16 Configurable 4 8 53 4 4+1 1 2 2 - 2 √ 1 - - 12 2 1 16-ch √ √ √ LQFP64 -40 to +105
M451LE6AE 128 32 Configurable 4 12 39 4 3+1 1 3 2 - 2 √ 2 - - 12 2 1 8-ch √ √ √ LQFP48 -40 to +105
M451RE6AE 128 32 Configurable 4 12 53 4 4+1 1 3 2 - 2 √ 2 - - 12 2 1 12-ch √ √ √ LQFP64 -40 to +105
M451VE6AE 128 32 Configurable 4 12 85 4 4+1 1 3 2 - 2 √ 2 - - 12 2 1 16-ch √ √ √ LQFP100 -40 to +105
M451LG6AE 256 32 Configurable 4 12 39 4 3+1 1 3 2 - 2 √ 2 - - 12 2 1 8-ch √ √ √ LQFP48 -40 to +105
M451RG6AE 256 32 Configurable 4 12 53 4 4+1 1 3 2 - 2 √ 2 - - 12 2 1 12-ch √ √ √ LQFP64 -40 to +105
M451VG6AE 256 32 Configurable 4 12 85 4 4+1 1 3 2 - 2 √ 2 - - 12 2 1 16-ch √ √ √ LQFP100 -40 to +105
*Marked in the table (4+1) means 4 UART+ 1 ISO-7816 UART.*ISO-7816 UART supports full duplex mode.*Supports two independent PWM modules with 16-bit resolution
Development Tools: NT-M451VMass Production Programmer: NG-M451X
●M451M Series
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/O
Timer (32-bit)
Connectivity
EBII²S
USB O
TG
USB D
evice
PWM
(16-bit)*Analog C
omp.
DAC(12-bit)
ADC(12-bit)
VAI
RTC (V
BAT)
ICPIAPISP
PackageOperating
Temp. Range (°C )
UART*
ISO-7816-3*
SPII²C
CANLIN
M451MLC3AE 40 16 Configurable 4 8 42 4 4+1 1 2 2 - 2 √ 1 - - 12 2 1 11-ch - - √ LQFP48 -40 to +105
M451MSC3AE 40 16 Configurable 4 8 55 4 4+1 1 2 2 - 2 √ 1 - - 12 2 1 13-ch - - √ LQFP64* -40 to +105
M451MLD3AE 72 16 Configurable 4 8 42 4 4+1 1 2 2 - 2 √ 1 - - 12 2 1 11-ch - - √ LQFP48 -40 to +105
M451MSD3AE 72 16 Configurable 4 8 55 4 4+1 1 2 2 - 2 √ 1 - - 12 2 1 13-ch - - √ LQFP64* -40 to +105
M451MLE6AE 128 32 Configurable 4 12 42 4 3+1 1 3 2 - 2 √ 2 - - 12 2 1 9-ch - - √ LQFP48 -40 to +105
M451MLG6AE 256 32 Configurable 4 12 42 4 3+1 1 3 2 - 2 √ 2 - - 12 2 1 9-ch - - √ LQFP48 -40 to +105
*Marked in the table (4+1) means 4 UART+ 1 ISO-7816 UART.*ISO-7816 UART supports full duplex mode.*Supports two independent PWM modules with 16-bit resolution
LQFP64*: 7x7mm
Development Tools: NT-M451VMass Production Programmer: NG-M451X
NuM
icro® Fam
ily - Arm
® Cortex
®-M4 M
CU
s
24 25
USB
Line
USB Line● NUC442 Series
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/O
Timer (32-bit)
Connectivity
EBII²S
PS/2
USB O
TG
USB D
evice
PWM
(16-bit)*
QEI
Analog Com
p.
OP Am
p.
ADC
(12-bit)
RTC (V
BAT)C
ryptoISO
-7816-3*
ICPIAPISP
PackageOperating
Temp. Range (°C )
UART*
SPISD
HostI²C
CANLIN
PS/2
NUC442RG8AE 256 64 16 16 45 4 4+3 3 √ 2 2 4 - √ 1 - FS HS 8 - 2 - x2, 8-ch √ √ 3 √ LQFP64 -40 to +105
NUC442VG8AE 256 64 16 16 77 4 6+5 4 √ 5 2 6 - √ 2 - FS HS 16 2 3 - x2, 16-ch √ √ 5 √ LQFP100 -40 to +105
NUC442KG8AE 256 64 16 16 101 4 6+6 4 √ 5 2 6 - √ 2 - FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP128 -40 to +105
NUC442JG8AE 256 64 16 16 114 4 6+6 4 √ 5 2 6 √ √ 2 - FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP144 -40 to +105
NUC442RI8AE 512 64 16 16 45 4 4+3 3 √ 2 2 4 - √ 1 - FS HS 8 - 2 - x2, 8-ch √ √ 3 √ LQFP64 -40 to +105
NUC442VI8AE 512 64 16 16 77 4 6+5 4 √ 5 2 6 - √ 2 - FS HS 16 2 3 - x2, 16-ch √ √ 5 √ LQFP100 -40 to +105
NUC442KI8AE 512 64 16 16 101 4 6+6 4 √ 5 2 6 - √ 2 - FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP128 -40 to +105
NUC442JI8AE 512 64 16 16 114 4 6+6 4 √ 5 2 6 √ √ 2 - FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP144 -40 to +105
*Marked in the table (4+1) means 4 UART+ 1 ISO-7816 UART.*ISO-7816 UART supports full duplex mode.*Supports two independent PWM modules with 16-bit resolution
● NUC472 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/O
Timer (32-bit)
Connectivity
EBII²S
EthernetM
AC
USB O
TG
USB D
evice
PWM
(16-bit)*
QEI
Analog Com
p.
OP Am
p.
ADC
(12-bit)
RTC (V
BAT)C
ryptoISO
-7816-3*
ICPIAPISP
PackageOperating
Temp. Range (°C )
UART*
SPISD
HostI²C
CANLIN
PS/2
NUC472VG8AE 256 64 16 16 77 4 6+5 4 √ 5 2 6 - √ 2 √ FS HS 16 2 3 - x2, 16-ch √ √ 5 √ LQFP100 -40 to +105
NUC472KG8AE 256 64 16 16 101 4 6+6 4 √ 5 2 6 - √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP128 -40 to +105
NUC472JG8AE 256 64 16 16 114 4 6+6 4 √ 5 2 6 √ √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP144 -40 to +105
NUC472HG8AE 256 64 16 16 144 4 6+6 4 √ 5 2 6 √ √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP176 -40 to +105
NUC472VI8AE 512 64 16 16 77 4 6+5 4 √ 5 2 6 - √ 2 √ FS HS 16 2 3 - x2, 16-ch √ √ 5 √ LQFP100 -40 to +105
NUC472KI8AE 512 64 16 16 101 4 6+6 4 √ 5 2 6 - √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP128 -40 to +105
NUC472JI8AE 512 64 16 16 114 4 6+6 4 √ 5 2 6 √ √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP144 -40 to +105
NUC472HI8AE 512 64 16 16 144 4 6+6 4 √ 5 2 6 √ √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP176 -40 to +105
● M452 Series
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/O
Timer (32-bit)
Connectivity
EBI
I²S
USB O
TG
USB D
evice
PWM
(16-bit)*
Analog Com
p.
DAC(12-bit)
ADC(12-bit)
VAI
RTC (VBAT)
ICPIAPISP
PackageOperating
Temp. Range (°C )
UART*
ISO-7816-3*
SPII²C
CANLIN
M452LC3AE 40 16 Configurable 4 8 35 4 4+1 1 2 2 - 2 √ 1 - FS 10 2 1 10-ch √ √ √ LQFP48 -40 to +105
M452LD3AE 72 16 Configurable 4 8 35 4 4+1 1 2 2 - 2 √ 1 - FS 10 2 1 10-ch √ √ √ LQFP48 -40 to +105
M452RD3AE 72 16 Configurable 4 8 49 4 4+1 1 2 2 - 2 √ 1 - FS 12 2 1 16-ch √ √ √ LQFP64 -40 to +105
M452LE6AE 128 32 Configurable 4 12 34 4 3+1 1 3 2 - 2 √ 1 FS - 10 2 1 8-ch √ √ √ LQFP48 -40 to +105
M452RE6AE 128 32 Configurable 4 12 48 4 4+1 1 3 2 - 2 √ 2 FS - 12 2 1 12-ch √ √ √ LQFP64 -40 to +105
M452LG6AE 256 32 Configurable 4 12 34 4 3+1 1 3 2 - 2 √ 1 FS - 10 2 1 8-ch √ √ √ LQFP48 -40 to +105
M452RG6AE 256 32 Configurable 4 12 48 4 4+1 1 3 2 - 2 √ 2 FS - 12 2 1 12-ch √ √ √ LQFP64 -40 to +105
Development Tools: NT-NUC442JMass Production Programmer: NG-NUC442R/ NG-NUC442V/ NG-NUC442K/ NG-NUC442J
Development Tools: NT-NUC472HMass Production Programmer:NG-NUC472V/ NG-NUC472K/ NG-NUC472J/ NG-NUC472H
*Marked in the table (6+6) means 6 UART+ 6 ISO-7816 UART.*ISO-7816 UART supports full duplex mode.*Supports two independent PWM modules with 16-bit resolution
*Marked in the table (4+1) means 4 UART+ 1 ISO-7816 UART.*ISO-7816 UART supports full duplex mode.*Supports two independent PWM modules with 16-bit resolution.
Development Tools: NT-M452VMass Production Programmer: NG-M452L/ NG-M452R
NuM
icro® Fam
ily - Arm
® Cortex
®-M4 M
CU
s
24 25
● M453 Series
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/O
Timer (32-bit)
Connectivity
EBI
I²S
USB O
TG
USB D
evice
PWM
(16-bit)*
Analog Com
p.
DAC(12-bit)
ADC(12-bit)
VAI
RTC (VBAT)
ICPIAPISP
PackageOperating
Temp. Range (°C )
UART*
ISO-7816-3*
SPII²C
CANLIN
M453LC3AE 40 16 Configurable 4 8 35 4 4+1 1 2 2 1 2 √ 1 - FS 10 2 1 10-ch √ √ √ LQFP48 -40 to +105
M453LD3AE 72 16 Configurable 4 8 35 4 4+1 1 2 2 1 2 √ 1 - FS 10 2 1 10-ch √ √ √ LQFP48 -40 to +105
M453RD3AE 72 16 Configurable 4 8 49 4 4+1 1 2 2 1 2 √ 1 - FS 12 2 1 16-ch √ √ √ LQFP64 -40 to +105
M453VD3AE 72 16 Configurable 4 8 72 4 4+1 1 2 2 1 2 √ 1 - FS 12 2 1 16-ch √ √ √ LQFP100 -40 to +105
M453LE6AE 128 32 Configurable 4 12 34 4 3+1 1 3 2 1 2 √ 2 FS - 10 2 1 8-ch √ √ √ LQFP48 -40 to +105
M453RE6AE 128 32 Configurable 4 12 48 4 4+1 1 3 2 1 2 √ 2 FS - 12 2 1 12-ch √ √ √ LQFP64 -40 to +105
M453VE6AE 128 32 Configurable 4 12 80 4 4+1 1 3 2 1 2 √ 2 FS - 12 2 1 16-ch √ √ √ LQFP100 -40 to +105
M453LG6AE 256 32 Configurable 4 12 34 4 3+1 1 3 2 1 2 √ 2 FS - 10 2 1 8-ch √ √ √ LQFP48 -40 to +105
M453RG6AE 256 32 Configurable 4 12 48 4 4+1 1 3 2 1 2 √ 2 FS - 12 2 1 12-ch √ √ √ LQFP64 -40 to +105
M453VG6AE 256 32 Configurable 4 12 80 4 4+1 1 3 2 1 2 √ 2 FS - 12 2 1 16-ch √ √ √ LQFP100 -40 to +105
1-ch*Marked in the table (4+1) means 4 UART+ 1 ISO-7816 UART.*ISO-7816 UART supports full duplex mode.*Supports two independent PWM modules with 16-bit resolution
Development Tools: NT-M451V (M451, M452, M453, M451M)Mass Production Programmer: NG-M453L/ NG-M453R/ NG-M453V
● M482 Series
● M483 Series
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/O
Timer (32-bit)
Connectivity
Quad SPI
SPI Master
EBIU
SB OTG
4
Ethernet MAC
PWM
5(16-bit)EC
APAnalog C
omp.
OP Am
p.
ADC
(12-bit)
DAC
(12-bit)
VAI
QEI
RTC
Crypto Engine
PackageOperating
Temp. Range (°C )
LPUART
1
ISO-7816-3
2SPI/I²S I²S I²CU
SCI 3
CAN
SD H
ost
M482LGAAE 256 96 Configurable 4 16 41 4 6+3 3 3 1 3 2 - 2 1 1 √ FS - 24 1 2 2 12-ch 2 √ 2 √ - LQFP48 -40 to +105
M482SGAAE 256 96 Configurable 4 16 52 4 6+3 3 4 1 3 2 - 2 1 1 √ FS - 24 1 2 2 16-ch 2 √ 2 √ - LQFP64 -40 to +105
M482KGAAE 256 96 Configurable 4 16 100 4 6+3 3 4 1 3 2 - 2 1 1 √ FS - 24 2 2 3 16-ch 2 √ 2 √ - LQFP128 -40 to +105
M482ZIDAE 512 160 Configurable 4 16 26 4 6+3 3 3 1 3 2 - 1 1 1 - FS - 24 - 2 1 10-ch 2 √ 1 √ - QFN33 -40 to +105
M482LIDAE 512 160 Configurable 4 16 41 4 6+3 3 3 1 3 2 - 2 1 1 √ FS - 24 1 2 2 12-ch 2 √ 2 √ - LQFP48 -40 to +105
M482SIDAE 512 160 Configurable 4 16 52 4 6+3 3 4 1 3 2 - 2 1 1 √ FS - 24 1 2 2 16-ch 2 √ 2 √ - LQFP64 -40 to +105
M482KIDAE 512 160 Configurable 4 16 100 4 6+3 3 4 1 3 2 - 2 1 1 √ FS - 24 2 2 3 16-ch 2 √ 2 √ - LQFP128 -40 to +105
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/OTim
er (32-bit)
Connectivity
Quad SPI
SPI Master
EBI
USB O
TG
Ethernet MAC
PWM
4(16-bit)EC
APAnalog C
omp.
OP Am
p.
ADC
(12-bit)
DAC
(12-bit)
VAI
QEI
RTCC
rypto Engine
PackageOperating
Temp. Range (°C )
LPUART
1
ISO-7816-3
2SPI/I²S I²S I²CU
SCI 3
CAN
SD H
ost
M483SGAAE 256 96 Configurable 4 16 44 4 6+3 3 4 1 3 2 2 2 1 1 √ HS - 24 1 2 2 16-ch 2 √ 2 √ - LQFP64 -40 to +105
M483SIDAE 512 160 Configurable 4 16 44 4 6+3 3 4 1 3 2 2 2 1 1 √ HS - 24 1 2 2 16-ch 2 √ 2 √ - LQFP64 -40 to +105
M483KIDAE 512 160 Configurable 4 16 100 4 6+3 3 4 1 3 2 2 2 1 1 √ HS+FS - 24 2 2 3 16-ch 2 √ 2 √ - LQFP128 -40 to +105
1. Marked in the table (6+3) means 6x UART+ 3x ISO-7816 UART. UART0 and UART1 both support LIN function.2. ISO-7816 supports full duplex UART mode.3. USCI supports UART, SPI and I²C mode.4. Twelve Enhanced PWM with twelve 16-bit timers and twelve Basic PWM with two 16-bit timers.5. Support crystal-less USB in device mode.
1. Marked in the table (6+3) means 6x UART+ 3x ISO-7816 UART. UART0 and UART1 both support LIN function.2. ISO-7816 supports full duplex UART mode.3. USCI supports UART, SPI and I²C mode.4. Twelve Enhanced PWM with twelve 16-bit timers and twelve Basic PWM with two 16-bit timers.
Development Tools: NK-PFMM487Mass Production Programmer: NG-M480Z/ NG-M480L/ NG-M480S/ NG-M480K/ NG-M480J
Development Tools: NK-PFMM487Mass Production Programmer: NG-M480Z/ NG-M480L/ NG-M480S/ NG-M480K/ NG-M480J
USB
Line
NuM
icro® Fam
ily - Arm
® Cortex
®-M4 M
CU
s
26 27
● M484 Series
● M485 Series
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/OTim
er (32-bit)
Connectivity
Quad SPI
SPI Master
EBI
USB O
TG
Ethernet MAC
PWM
4(16-bit)EC
APAnalog C
omp.
OP Am
p.
ADC
(12-bit)
DAC
(12-bit)
VAIQ
EIRTC
Crypto Engine
PackageOperating
Temp. Range (°C )
LPUART
1
ISO-7816-3
2SPI/I²S I²S I²CU
SCI 3
CAN
SD H
ost
M484SGAAE 256 96 Configurable 4 16 44 4 6+3 3 4 1 3 2 - 2 1 1 √ HS - 24 1 2 2 16-ch 2 √ 2 √ - LQFP64 -40 to +105
M484SGAAE2U 256 96 Configurable 4 16 44 4 6+3 3 4 1 3 2 - 2 1 1 √ HS+FS - 24 1 2 2 16-ch 2 √ 2 √ - LQFP64 -40 to +105
M484SIDAE 512 160 Configurable 4 16 44 4 6+3 3 4 1 3 2 - 2 1 1 √ HS - 24 1 2 2 16-ch 2 √ 2 √ - LQFP64 -40 to +105
M484SIDAE2U 512 160 Configurable 4 16 44 4 6+3 3 4 1 3 2 - 2 1 1 √ HS+FS - 24 1 2 2 16-ch 2 √ 2 √ - LQFP64 -40 to +105
M484KIDAE 512 160 Configurable 4 16 100 4 6+3 3 4 1 3 2 - 2 1 1 √ HS+FS - 24 2 2 3 16-ch 2 √ 2 √ - LQFP128 -40 to +105
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/OTim
er (32-bit)
Connectivity
Quad SPI
SPI Master
EBI
USB O
TG
Ethernet MAC
PWM
4(16-bit)EC
APAnalog C
omp.
OP Am
p.
ADC
(12-bit)
DAC
(12-bit)
VAIQ
EIRTC
C
rypto Engine
PackageOperating
Temp. Range (°C )
LPUART
1
ISO-7816-3
2SPI/I²S I²S I²CU
SCI 3
CAN
SD H
ost
M485ZIDAE 512 160 Configurable 4 16 26 4 6+3 3 3 1 3 2 - 1 1 1 - FS - 24 - 2 1 10-ch 2 √ 1 √ √ QFN33 -40 to +105
M485LIDAE 512 160 Configurable 4 16 41 4 6+3 3 3 1 3 2 - 2 1 1 √ FS - 24 1 2 2 12-ch 2 √ 2 √ √ LQFP48 -40 to +105
M485SIDAE 512 160 Configurable 4 16 44 4 6+3 3 4 1 3 2 - 2 1 1 √ HS - 24 1 2 2 16-ch 2 √ 2 √ √ LQFP64 -40 to +105
M485KIDAE 512 160 Configurable 4 16 100 4 6+3 3 4 1 3 2 - 2 1 1 √ HS+FS - 24 2 2 3 16-ch 2 √ 2 √ √ LQFP128 -40 to +105
1. Marked in the table (6+3) means 6x UART+ 3x ISO-7816 UART. UART0 and UART1 both support LIN function.2. ISO-7816 supports full duplex UART mode.3. USCI supports UART, SPI and I²C mode.4. Twelve Enhanced PWM with twelve 16-bit timers and twelve Basic PWM with two 16-bit timers.
1. Marked in the table (6+3) means 6x UART+ 3x ISO-7816 UART. UART0 and UART1 both support LIN function.2. ISO-7816 supports full duplex UART mode.3. USCI supports UART, SPI and I²C mode.4. Twelve Enhanced PWM with twelve 16-bit timers and twelve Basic PWM with two 16-bit timers.
● M487 Series
● NUC505 Series
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/OTim
er (32-bit)
Connectivity
Quad SPI
SPI Master
EBI
USB O
TG
Ethernet MAC
PWM
4(16-bit)EC
APAnalog C
omp.
OP Am
p.
ADC
(12-bit))
DAC
(12-bit)
VAIQ
EIRTC
C
rypto Engine
PackageOperating
Temp. Range (°C )
LPUART
1
ISO-7816-3
2SPI/I²S I²S I²CU
SCI 3
CAN
SD H
ost
M487SIDAE 512 160 Configurable 4 16 44 4 6+3 3 4 1 3 2 2 2 1 1 √ HS √ 24 1 2 2 16-ch 2 √ 2 √ √ LQFP64 -40 to +105
M487KIDAE 512 160 Configurable 4 16 100 4 6+3 3 4 1 3 2 2 2 1 1 √ HS+FS √ 24 2 2 3 16-ch 2 √ 2 √ √ LQFP128 -40 to +105
M487JIDAE 512 160 Configurable 4 16 114 4 6+3 3 4 1 3 2 2 2 1 1 √ HS+FS √ 24 2 2 3 16-ch 2 √ 2 √ √ LQFP144 -40 to +105
Part No.Serial Flash
(Kbytes)
SRAM(Kbytes) I/O Timer
(32-bit)
Connectivity
I²S USB Host
USB Device
PWM(16-bit)
ADC(12-bit)
Digital MIC
24-bit Audio
CODEC
RTC (VBAT)
Security against piracy
ICP PackageOperating
Temp. Range (°C )U
ART
SPI*
SD H
ostI²C
NUC505DLA 512 128 20 4 2 1+1 - 2 1 - HS - 5-ch √ √ - √ √ LQFP48 -40 to +85
NUC505YLA2Y 512 128 25 4 3 2+1 √ 2 1 FS HS 4 5-ch √ - √* √ √ QFN48 -40 to +85
NUC505YLA 512 128 20 4 2 1+1 - 2 1 - HS - 5-ch √ √ - √ √ QFN48 -40 to +85
NUC505DSA 512 128 34 4 3 2+1 √ 2 1 FS HS 4 5-ch √ √ - √ √ LQFP64* -40 to +85
NUC505DL13Y 2048 128 25 4 3 2+1 √ 2 1 FS HS 4 5-ch √ - √* √ √ LQFP48 -40 to +85
NUC505DS13Y 2048 128 35 4 3 2+1 √ 2 1 FS HS 4 8-ch √ √* √* √ √ LQFP64* -40 to +85
NUC505YO13Y 2048 128 52 4 3 2+1 √ 2 1 FS HS 4 8-ch √ √ √ √ √ QFN88 -40 to +85
1. Marked in the table (6+3) means 6x UART+ 3x ISO-7816 UART. UART0 and UART1 both support LIN function.2. ISO-7816 supports full duplex UART mode.3. USCI supports UART, SPI and I²C mode.4. Twelve Enhanced PWM with twelve 16-bit timers and twelve Basic PWM with two 16-bit timers.
*The 24-bit Audio CODEC marked in the table √* means it only supports Headphone Out.*The +1 marked in the table SPI* means SPIM can only support SPI Flash.*The RTC marked in the table √* means it cannot support 32 kHz crystal pin out.*The packages are not pin-to-pin compatible even though they are the same packages.
Development Tools: NK-PFMM487Mass Production Programmer: NG-M480Z/ NG-M480L/ NG-M480S/ NG-M480K/ NG-M480J
Development Tools: NK-PFMM487Mass Production Programmer: NG-M480Z/ NG-M480L/ NG-M480S/ NG-M480K/ NG-M480J
Development Tools: NK-PFMM487Mass Production Programmer: NG-M480Z/ NG-M480L/ NG-M480S/ NG-M480K/ NG-M480J
Development Tools: NT-NUC505Y (NUC505)Mass Production Programmer: NG-NUC505LA (NUC505DLA)/ NG-NUC505L (NUC505DL13Y)/ NG-NUC505NA (NUC505YLA)/ NG-NUC505N (NUC505YLA2Y)/ NG-NUC505SA (NUC505DSA)/ NG-NUC505S (NUC505DS13Y)/ NG-NUC505O (NUC505YO13Y)
USB
Line
NuM
icro® Fam
ily - Arm
® Cortex
®-M4 M
CU
s
26 27
● NUC442 Series
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/O
Timer (32-bit)
Connectivity
EBII²S
PS/2
USB O
TG
USB D
evice
PWM
(16-bit)*
QEI
Analog Com
p.
OP Am
p.
ADC
(12-bit)
RTC (V
BAT)C
ryptoISO
-7816-3*
ICPIAPISP
PackageOperating
Temp. Range (°C )
UART*
SPISD
HostI²C
CANLIN
PS/2
NUC442RG8AE 256 64 16 16 45 4 4+3 3 √ 2 2 4 - √ 1 - FS HS 8 - 2 - x2, 8-ch √ √ 3 √ LQFP64 -40 to +105
NUC442VG8AE 256 64 16 16 77 4 6+5 4 √ 5 2 6 - √ 2 - FS HS 16 2 3 - x2, 16-ch √ √ 5 √ LQFP100 -40 to +105
NUC442KG8AE 256 64 16 16 101 4 6+6 4 √ 5 2 6 - √ 2 - FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP128 -40 to +105
NUC442JG8AE 256 64 16 16 114 4 6+6 4 √ 5 2 6 √ √ 2 - FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP144 -40 to +105
NUC442RI8AE 512 64 16 16 45 4 4+3 3 √ 2 2 4 - √ 1 - FS HS 8 - 2 - x2, 8-ch √ √ 3 √ LQFP64 -40 to +105
NUC442VI8AE 512 64 16 16 77 4 6+5 4 √ 5 2 6 - √ 2 - FS HS 16 2 3 - x2, 16-ch √ √ 5 √ LQFP100 -40 to +105
NUC442KI8AE 512 64 16 16 101 4 6+6 4 √ 5 2 6 - √ 2 - FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP128 -40 to +105
NUC442JI8AE 512 64 16 16 114 4 6+6 4 √ 5 2 6 √ √ 2 - FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP144 -40 to +105
● NUC472 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/O
Timer (32-bit)
Connectivity
EBII²S
EthernetM
AC
USB O
TG
USB D
evice
PWM
(16-bit)*
QEI
Analog Com
p.
OP Am
p.
ADC
(12-bit)
RTC (V
BAT)C
ryptoISO
-7816-3*
ICPIAPISP
PackageOperating
Temp. Range (°C )
UART*
SPISD
HostI²C
CANLIN
PS/2NUC472VG8AE 256 64 16 16 77 4 6+5 4 √ 5 2 6 - √ 2 √ FS HS 16 2 3 - x2, 16-ch √ √ 5 √ LQFP100 -40 to +105NUC472KG8AE 256 64 16 16 101 4 6+6 4 √ 5 2 6 - √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP128 -40 to +105NUC472JG8AE 256 64 16 16 114 4 6+6 4 √ 5 2 6 √ √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP144 -40 to +105NUC472HG8AE 256 64 16 16 144 4 6+6 4 √ 5 2 6 √ √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP176 -40 to +105NUC472VI8AE 512 64 16 16 77 4 6+5 4 √ 5 2 6 - √ 2 √ FS HS 16 2 3 - x2, 16-ch √ √ 5 √ LQFP100 -40 to +105NUC472KI8AE 512 64 16 16 101 4 6+6 4 √ 5 2 6 - √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP128 -40 to +105NUC472JI8AE 512 64 16 16 114 4 6+6 4 √ 5 2 6 √ √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP144 -40 to +105NUC472HI8AE 512 64 16 16 144 4 6+6 4 √ 5 2 6 √ √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP176 -40 to +105
*Marked in the table (4+1) means 4 UART+ 1 ISO-7816 UART. *ISO-7816 UART supports full duplex mode. *Supports two independent PWM modules with 16-bit resolution
*Marked in the table (4+1) means 4 UART+ 1 ISO-7816 UART. *ISO-7816 UART supports full duplex mode. *Supports two independent PWM modules with 16-bit resolutionDevelopment Tools: NT-NUC442JMass Production Programmer: NG-NUC442R/ NG-NUC442V/ NG-NUC442K/ NG-NUC442J
Development Tools: NT-NUC472HMass Production Programmer:NG-NUC472V/ NG-NUC472K/ NG-NUC472J/ NG-NUC472H
● M453 Series
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/O
Timer (32-bit)
Connectivity
EBI
I²S
USB O
TG
USB D
evice
PWM
(16-bit)*
Analog Com
p.
DAC(12-bit)
ADC(12-bit)
VAI
RTC (VBAT)
ICPIAPISP
PackageOperating
Temp. Range (°C )
UART*
ISO-7816-3*
SPII²C
CANLIN
M453LC3AE 40 16 Configurable 4 8 35 4 4+1 1 2 2 1 2 √ 1 - FS 10 2 1 10-ch √ √ √ LQFP48 -40 to +105
M453LD3AE 72 16 Configurable 4 8 35 4 4+1 1 2 2 1 2 √ 1 - FS 10 2 1 10-ch √ √ √ LQFP48 -40 to +105
M453RD3AE 72 16 Configurable 4 8 49 4 4+1 1 2 2 1 2 √ 1 - FS 12 2 1 16-ch √ √ √ LQFP64 -40 to +105
M453VD3AE 72 16 Configurable 4 8 72 4 4+1 1 2 2 1 2 √ 1 - FS 12 2 1 16-ch √ √ √ LQFP100 -40 to +105
M453LE6AE 128 32 Configurable 4 12 34 4 3+1 1 3 2 1 2 √ 2 FS - 10 2 1 8-ch √ √ √ LQFP48 -40 to +105
M453RE6AE 128 32 Configurable 4 12 48 4 4+1 1 3 2 1 2 √ 2 FS - 12 2 1 12-ch √ √ √ LQFP64 -40 to +105
M453VE6AE 128 32 Configurable 4 12 80 4 4+1 1 3 2 1 2 √ 2 FS - 12 2 1 16-ch √ √ √ LQFP100 -40 to +105
M453LG6AE 256 32 Configurable 4 12 34 4 3+1 1 3 2 1 2 √ 2 FS - 10 2 1 8-ch √ √ √ LQFP48 -40 to +105
M453RG6AE 256 32 Configurable 4 12 48 4 4+1 1 3 2 1 2 √ 2 FS - 12 2 1 12-ch √ √ √ LQFP64 -40 to +105
M453VG6AE 256 32 Configurable 4 12 80 4 4+1 1 3 2 1 2 √ 2 FS - 12 2 1 16-ch √ √ √ LQFP100 -40 to +105
1-ch*Marked in the table (4+1) means 4 UART+ 1 ISO-7816 UART. *ISO-7816 UART supports full duplex mode. *Supports two independent PWM modules with 16-bit resolutionDevelopment Tools: NT-M451V (M451, M452, M453, M451M)Mass Production Programmer: NG-M453L/ NG-M453R/ NG-M453V
CAN Line
CA
N Line
NuM
icro® Fam
ily - Arm
® Cortex
®-M4 M
CU
s
28 29
CA
N Line
● M487 Series
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/OTim
er (32-bit)
ConnectivityQ
uad SPISPI M
asterEBI
USB O
TG
Ethernet MAC
PWM
4(16-bit)EC
APAnalog C
omp.
OP Am
p.
DAC
(12-bit)
DAC
(12-bit)
VAIQ
EIRTC
Crypto Engine
PackageOperating
Temp. Range (°C )
LPUART
1
ISO-7816-3
2SPI/I²S I²S I²CU
SCI 3
CAN
SD H
ost
M487SIDAE 512 160 Configurable 4 16 44 4 6+3 3 4 1 3 2 2 2 1 1 √ HS √ 24 1 2 2 16-ch 2 √ 2 √ √ LQFP64 -40 to +105
M487KIDAE 512 160 Configurable 4 16 100 4 6+3 3 4 1 3 2 2 2 1 1 √ HS+FS √ 24 2 2 3 16-ch 2 √ 2 √ √ LQFP128 -40 to +105
M487JIDAE 512 160 Configurable 4 16 114 4 6+3 3 4 1 3 2 2 2 1 1 √ HS+FS √ 24 2 2 3 16-ch 2 √ 2 √ √ LQFP144 -40 to +1051. Marked in the table (6+3) means 6x UART+ 3x ISO-7816 UART. UART0 and UART1 both support LIN function.2. ISO-7816 supports full duplex UART mode.3. USCI supports UART, SPI and I²C mode.4. Twelve Enhanced PWM with twelve 16-bit timers and twelve Basic PWM with two 16-bit timers.
● M483 Series
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/OTim
er (32-bit)
Connectivity
Quad SPI
SPI Master
EBI
USB O
TG
Ethernet MAC
PWM
4(16-bit)EC
APAnalog C
omp.
OP Am
p.
ADC
(12-bit)
DAC
(12-bit)
VAI
QEI
RTC
Crypto Engine
PackageOperating
Temp. Range (°C )
LPUART
1
ISO-7816-3
2SPI/I²S I²S I²CU
SCI 3
CAN
SD H
ost
M483SGAAE 256 96 Configurable 4 16 44 4 6+3 3 4 1 3 2 2 2 1 1 √ HS - 24 1 2 2 16-ch 2 √ 2 √ - LQFP64 -40 to +105
M483SIDAE 512 160 Configurable 4 16 44 4 6+3 3 4 1 3 2 2 2 1 1 √ HS - 24 1 2 2 16-ch 2 √ 2 √ - LQFP64 -40 to +105
M483KIDAE 512 160 Configurable 4 16 100 4 6+3 3 4 1 3 2 2 2 1 1 √ HS+FS - 24 2 2 3 16-ch 2 √ 2 √ - LQFP128 -40 to +1051. Marked in the table (6+3) means 6x UART+ 3x ISO-7816 UART. UART0 and UART1 both support LIN function.2. ISO-7816 supports full duplex UART mode.3. USCI supports UART, SPI and I²C mode.4. Twelve Enhanced PWM with twelve 16-bit timers and twelve Basic PWM with two 16-bit timers.
Development Tools: NK-PFMM487Mass Production Programmer: NG-M480Z/ NG-M480L/ NG-M480S/ NG-M480K/ NG-M480J
Development Tools: NK-PFMM487Mass Production Programmer: NG-M480Z/ NG-M480L/ NG-M480S/ NG-M480K/ NG-M480J
NuM
icro® Fam
ily - Arm
® Cortex
®-M4 M
CU
s
28 29
Crypto Line
● NUC442 Series
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/O
Timer (32-bit)
Connectivity
EBII²S
PS/2
USB O
TG
USB D
evice
PWM
(16-bit)*
QEI
Analog Com
p.
OP Am
p.
ADC
(12-bit)
RTC (V
BAT)C
ryptoISO
-7816-3*
ICPIAPISP
PackageOperating
Temp. Range (°C )
UART*
SPISD
HostI²C
CANLIN
PS/2
NUC442RG8AE 256 64 16 16 45 4 4+3 3 √ 2 2 4 - √ 1 - FS HS 8 - 2 - x2, 8-ch √ √ 3 √ LQFP64 -40 to +105
NUC442VG8AE 256 64 16 16 77 4 6+5 4 √ 5 2 6 - √ 2 - FS HS 16 2 3 - x2, 16-ch √ √ 5 √ LQFP100 -40 to +105
NUC442KG8AE 256 64 16 16 101 4 6+6 4 √ 5 2 6 - √ 2 - FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP128 -40 to +105
NUC442JG8AE 256 64 16 16 114 4 6+6 4 √ 5 2 6 √ √ 2 - FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP144 -40 to +105
NUC442RI8AE 512 64 16 16 45 4 4+3 3 √ 2 2 4 - √ 1 - FS HS 8 - 2 - x2, 8-ch √ √ 3 √ LQFP64 -40 to +105
NUC442VI8AE 512 64 16 16 77 4 6+5 4 √ 5 2 6 - √ 2 - FS HS 16 2 3 - x2, 16-ch √ √ 5 √ LQFP100 -40 to +105
NUC442KI8AE 512 64 16 16 101 4 6+6 4 √ 5 2 6 - √ 2 - FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP128 -40 to +105
NUC442JI8AE 512 64 16 16 114 4 6+6 4 √ 5 2 6 √ √ 2 - FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP144 -40 to +105
● NUC472 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/O
Timer (32-bit)
ConnectivityEBII²S
EthernetM
AC
USB O
TG
USB D
evice
PWM
(16-bit)*
QEI
Analog Com
p.
OP Am
p.
ADC
(12-bit)
RTC (V
BAT)C
ryptoISO
-7816-3*
ICPIAPISP
PackageOperating
Temp. Range (°C )
UART*
SPISD
HostI²C
CANLIN
PS/2
NUC472VG8AE 256 64 16 16 77 4 6+5 4 √ 5 2 6 - √ 2 √ FS HS 16 2 3 - x2, 16-ch √ √ 5 √ LQFP100 -40 to +105NUC472KG8AE 256 64 16 16 101 4 6+6 4 √ 5 2 6 - √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP128 -40 to +105NUC472JG8AE 256 64 16 16 114 4 6+6 4 √ 5 2 6 √ √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP144 -40 to +105NUC472HG8AE 256 64 16 16 144 4 6+6 4 √ 5 2 6 √ √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP176 -40 to +105NUC472VI8AE 512 64 16 16 77 4 6+5 4 √ 5 2 6 - √ 2 √ FS HS 16 2 3 - x2, 16-ch √ √ 5 √ LQFP100 -40 to +105NUC472KI8AE 512 64 16 16 101 4 6+6 4 √ 5 2 6 - √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP128 -40 to +105NUC472JI8AE 512 64 16 16 114 4 6+6 4 √ 5 2 6 √ √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP144 -40 to +105NUC472HI8AE 512 64 16 16 144 4 6+6 4 √ 5 2 6 √ √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP176 -40 to +105
*Marked in the table (4+1) means 4 UART+ 1 ISO-7816 UART. *ISO-7816 UART supports full duplex mode. *Supports two independent PWM modules with 16-bit resolution
*Marked in the table (4+1) means 4 UART+ 1 ISO-7816 UART. *ISO-7816 UART supports full duplex mode. *Supports two independent PWM modules with 16-bit resolutionDevelopment Tools: NT-NUC442JMass Production Programmer: NG-NUC442R/ NG-NUC442V/ NG-NUC442K/ NG-NUC442J
Development Tools: NT-NUC472HMass Production Programmer:NG-NUC472V/ NG-NUC472K/ NG-NUC472J/ NG-NUC472H
● M485 Series
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/OTim
er (32-bit)
Connectivity
Quad SPI
SPI Master
EBI
USB O
TG
Ethernet MAC
PWM
4(16-bit)EC
APAnalog C
omp.
OP Am
p.
ADC
(12-bit)
DAC
(12-bit)
VAIQ
EIRTC
C
rypto Engine
PackageOperating
Temp. Range (°C )
LPUART
1
ISO-7816-3
2SPI/I²S I²S I²CU
SCI 3
CAN
SD H
ost
M485ZIDAE 512 160 Configurable 4 16 26 4 6+3 3 3 1 3 2 - 1 1 1 - FS - 24 - 2 1 10-ch 1 √ 1 √ √ QFN33 -40 to +105
M485LIDAE 512 160 Configurable 4 16 41 4 6+3 3 3 1 3 2 - 2 1 1 √ FS - 24 1 2 2 12-ch 2 √ 2 √ √ LQFP48 -40 to +105
M485SIDAE 512 160 Configurable 4 16 44 4 6+3 3 4 1 3 2 - 2 1 1 √ HS - 24 1 2 2 16-ch 2 √ 2 √ √ LQFP64 -40 to +105
M485KIDAE 512 160 Configurable 4 16 100 4 6+3 3 4 1 3 2 - 2 1 1 √ HS+FS - 24 2 2 3 16-ch 2 √ 2 √ √ LQFP128 -40 to +105
1. Marked in the table (6+3) means 6x UART+ 3x ISO-7816 UART. UART0 and UART1 both support LIN function.2. ISO-7816 supports full duplex UART mode.3. USCI supports UART, SPI and I²C mode.4. Twelve Enhanced PWM with twelve 16-bit timers and twelve Basic PWM with two 16-bit timers.Development Tools: NK-PFMM487Mass Production Programmer: NG-M480Z/ NG-M480L/ NG-M480S/ NG-M480K/ NG-M480J
Crypto Line
NuM
icro® Fam
ily - Arm
® Cortex
®-M4 M
CU
s
30 31
Crypto Line
● M487 Series
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/OTim
er (32-bit)
Connectivity
Quad SPI
SPI Master
EBI
USB O
TG
Ethernet MAC
PWM
4(16-bit)EC
APAnalog C
omp.
OP Am
p.
ADC
(12-bit)
DAC
(12-bit)
VAIQ
EIRTC
C
rypto Engine
PackageOperating
Temp. Range (°C )
LPUART
1
ISO-7816-3
2SPI/I²S I²S I²CU
SCI 3
CAN
SD H
ost
M487SIDAE 512 160 Configurable 4 16 44 4 6+3 3 4 1 3 2 2 2 1 1 √ HS √ 24 1 2 2 16-ch 2 √ 2 √ √ LQFP64 -40 to +105
M487KIDAE 512 160 Configurable 4 16 100 4 6+3 3 4 1 3 2 2 2 1 1 √ HS+FS √ 24 2 2 3 16-ch 2 √ 2 √ √ LQFP128 -40 to +105
M487JIDAE 512 160 Configurable 4 16 114 4 6+3 3 4 1 3 2 2 2 1 1 √ HS+FS √ 24 2 2 3 16-ch 2 √ 2 √ √ LQFP144 -40 to +1051. Marked in the table (6+3) means 6x UART+ 3x ISO-7816 UART. UART0 and UART1 both support LIN function.2. ISO-7816 supports full duplex UART mode.3. USCI supports UART, SPI and I²C mode.4. Twelve Enhanced PWM with twelve 16-bit timers and twelve Basic PWM with two 16-bit timers.Development Tools: NK-PFMM487Mass Production Programmer: NG-M480Z/ NG-M480L/ NG-M480S/ NG-M480K/ NG-M480J
NuM
icro® Fam
ily - Arm
® Cortex
®-M4 M
CU
s
30 31
Ethernet Line
● M487 Series
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/OTim
er (32-bit)
ConnectivityQ
uad SPISPI M
asterEBI
USB O
TG
Ethernet MAC
PWM
4(16-bit)EC
APAnalog C
omp.
OP Am
p.
ADC
(12-bit)
DAC
(12-bit)
VAIQ
EIRTC
Crypto Engine
PackageOperating
Temp. Range (°C )
LPUART
1
ISO-7816-3
2SPI/I²S I²S I²CU
SCI 3
CAN
SD H
ost
M487SIDAE 512 160 Configurable 4 16 44 4 6+3 3 4 1 3 2 2 2 1 1 √ HS √ 24 1 2 2 16-ch 2 √ 2 √ √ LQFP64 -40 to +105
M487KIDAE 512 160 Configurable 4 16 100 4 6+3 3 4 1 3 2 2 2 1 1 √ HS+FS √ 24 2 2 3 16-ch 2 √ 2 √ √ LQFP128 -40 to +105
M487JIDAE 512 160 Configurable 4 16 114 4 6+3 3 4 1 3 2 2 2 1 1 √ HS+FS √ 24 2 2 3 16-ch 2 √ 2 √ √ LQFP144 -40 to +1051. Marked in the table (6+3) means 6x UART+ 3x ISO-7816 UART. UART0 and UART1 both support LIN function.2. ISO-7816 supports full duplex UART mode.3. USCI supports UART, SPI and I²C mode.4. Twelve Enhanced PWM with twelve 16-bit timers and twelve Basic PWM with two 16-bit timers.Development Tools: NK-PFMM487Mass Production Programmer: NG-M480Z/ NG-M480L/ NG-M480S/ NG-M480K/ NG-M480J
● NUC472 Series
Part No. Flash(Kbytes)
SRAM
(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/O
Timer (32-bit)
Connectivity
EBII²S
EthernetM
AC
USB O
TG
USB D
evice
PWM
(16-bit)*
QEI
Analog Com
p.
OP Am
p.
ADC
(12-bit)
RTC (V
BAT)C
ryptoISO
-7816-3*
ICPIAPISP
PackageOperating
Temp. Range (°C )
UART*
SPISD
HostI²C
CANLIN
PS/2
NUC472VG8AE 256 64 16 16 77 4 6+5 4 √ 5 2 6 - √ 2 √ FS HS 16 2 3 - x2, 16-ch √ √ 5 √ LQFP100 -40 to +105NUC472KG8AE 256 64 16 16 101 4 6+6 4 √ 5 2 6 - √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP128 -40 to +105NUC472JG8AE 256 64 16 16 114 4 6+6 4 √ 5 2 6 √ √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP144 -40 to +105NUC472HG8AE 256 64 16 16 144 4 6+6 4 √ 5 2 6 √ √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP176 -40 to +105NUC472VI8AE 512 64 16 16 77 4 6+5 4 √ 5 2 6 - √ 2 √ FS HS 16 2 3 - x2, 16-ch √ √ 5 √ LQFP100 -40 to +105NUC472KI8AE 512 64 16 16 101 4 6+6 4 √ 5 2 6 - √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP128 -40 to +105NUC472JI8AE 512 64 16 16 114 4 6+6 4 √ 5 2 6 √ √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP144 -40 to +105NUC472HI8AE 512 64 16 16 144 4 6+6 4 √ 5 2 6 √ √ 2 √ FS HS 16 2 3 2 x2, 16-ch √ √ 6 √ LQFP176 -40 to +105
*Marked in the table (4+1) means 4 UART+ 1 ISO-7816 UART. *ISO-7816 UART supports full duplex mode. *Supports two independent PWM modules with 16-bit resolutionDevelopment Tools: NT-NUC472HMass Production Programmer:NG-NUC472V/ NG-NUC472K/ NG-NUC472J/ NG-NUC472H
Ethernet Line
Audio Codec Line● NUC505 Series
Part No.Serial Flash
(Kbytes)
SRAM(Kbytes) I/O Timer
(32-bit)
Connectivity
I²S USB Host
USB Device
PWM(16-bit)
ADC(12-bit)
Digital MIC
24-bit Audio
CODEC
RTC (VBAT)
Security against piracy
ICP PackageOperating
Temp. Range (°C )U
ART
SPI*
SD H
ostI²C
NUC505DLA 512 128 18 4 2 1+1 - 2 1 - HS - 5-ch √ √ - √ √ LQFP48 -40 to +85
NUC505YLA2Y 512 128 25 4 3 2+1 √ 2 1 FS HS 4 5-ch √ - √* √ √ QFN48 -40 to +85
NUC505YLA 512 128 18 4 2 1+1 - 2 1 - HS - 5-ch √ √ - √ √ QFN48 -40 to +85
NUC505DSA 512 128 34 4 3 2+1 √ 2 1 FS HS 4 5-ch √ √ - √ √ LQFP64* -40 to +85
NUC505DL13Y 2048 128 25 4 3 2+1 √ 2 1 FS HS 4 5-ch √ - √* √ √ LQFP48 -40 to +85
NUC505DS13Y 2048 128 35 4 3 2+1 √ 2 1 FS HS 4 8-ch √ √* √* √ √ LQFP64* -40 to +85
NUC505YO13Y 2048 128 52 4 3 2+1 √ 2 1 FS HS 4 8-ch √ √ √ √ √ QFN88 -40 to +85
*The 24-bit Audio CODEC marked in the table √* means it only supports Headphone Out.*The +1 marked in the table SPI* means SPIM can only support SPI Flash.*The RTC marked in the table √* means it cannot support 32 kHz crystal pin out.*The packages are not pin-to-pin compatible even though they are the same packages.Development Tools: NT-NUC505Y (NUC505)Mass Production Programmer: NG-NUC505LA (NUC505DLA)/ NG-NUC505L (NUC505DL13Y)/ NG-NUC505NA (NUC505YLA)/ NG-NUC505N (NUC505YLA2Y)/ NG-NUC505SA (NUC505DSA)/ NG-NUC505S (NUC505DS13Y)/ NG-NUC505O (NUC505YO13Y)
NuM
icro® Fam
ily - Arm
® Cortex
®-M4 M
CU
s
32 33
High Performance Line
High Perform
ance Line
● M481 Series
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/OTim
er (32-bit)
Connectivity
Quad SPI
SPI Master
EBI
USB O
TG
Ethernet MAC
PWM
4(16-bit)EC
APAnalog C
omp.
OP Am
p.
ADC
(12-bit)
DAC
(12-bit)
VAIQ
EIRTC
Crypto Engine
PackageOperating
Temp. Range (°C )
LPUART
1
ISO-7816-3
2SPI/I²S I²S I²CU
SCI 3
CAN
SD H
ost
M481ZGAAE 256 96 Configurable 4 16 26 4 6+3 3 3 1 3 2 - 1 1 1 - - - 24 - 2 1 10-ch 2 √ 1 √ - QFN33 -40 to +105
M481LGAAE 256 96 Configurable 4 16 41 4 6+3 3 3 1 3 2 - 2 1 1 √ - - 24 1 2 2 12-ch 2 √ 2 √ - LQFP48 -40 to +105
M481SGAAE 256 96 Configurable 4 16 52 4 6+3 3 4 1 3 2 - 2 1 1 √ - - 24 1 2 2 16-ch 2 √ 2 √ - LQFP64 -40 to +105
M481ZIDAE 512 160 Configurable 4 16 26 4 6+3 3 3 1 3 2 - 1 1 1 - - - 24 - 2 1 10-ch 2 √ 1 √ - QFN33 -40 to +105
M481LIDAE 512 160 Configurable 4 16 41 4 6+3 3 3 1 3 2 - 2 1 1 √ - - 24 1 2 2 12-ch 2 √ 2 √ - LQFP48 -40 to +105
M481SIDAE 512 160 Configurable 4 16 52 4 6-3 3 4 1 3 2 - 2 1 1 √ - - 24 1 2 2 16-ch 2 √ 2 √ - LQFP64 -40 to +105
1. Marked in the table (6+3) means 6x UART+ 3x ISO-7816 UART. UART0 and UART1 both support LIN function.2. ISO-7816 supports full duplex UART mode.3. USCI supports UART, SPI and I²C mode.4. Twelve Enhanced PWM with twelve 16-bit timers and twelve Basic PWM with two 16-bit timers.
Development Tools: NK-PFMM487Mass Production Programmer: NG-M480Z/ NG-M480L/ NG-M480S/ NG-M480K/ NG-M480J
● M482 Series
● M483 Series
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/O
Timer (32-bit)
Connectivity
Quad SPI
SPI Master
EBIU
SB OTG
4
Ethernet MAC
PWM
5(16-bit)EC
APAnalog C
omp.
OP Am
p.
ADC
(12-bit)
DAC
(12-bit)
VAI
QEI
RTC
Crypto Engine
PackageOperating
Temp. Range (°C )
LPUART
1
ISO-7816-3
2SPI/I²S I²S I²CU
SCI 3
CAN
SD H
ost
M482LGAAE 256 96 Configurable 4 16 41 4 6+3 3 3 1 3 2 - 2 1 1 √ FS - 24 1 2 2 12-ch 2 √ 2 √ - LQFP48 -40 to +105
M482SGAAE 256 96 Configurable 4 16 52 4 6+3 3 4 1 3 2 - 2 1 1 √ FS - 24 1 2 2 16-ch 2 √ 2 √ - LQFP64 -40 to +105
M482KGAAE 256 96 Configurable 4 16 100 4 6+3 3 4 1 3 2 - 2 1 1 √ FS - 24 2 2 3 16-ch 2 √ 2 √ - LQFP128 -40 to +105
M482ZIDAE 512 160 Configurable 4 16 26 4 6+3 3 3 1 3 2 - 1 1 1 - FS - 24 - 2 1 10-ch 2 √ 1 √ - QFN33 -40 to +105
M482LIDAE 512 160 Configurable 4 16 41 4 6+3 3 3 1 3 2 - 2 1 1 √ FS - 24 1 2 2 12-ch 2 √ 2 √ - LQFP48 -40 to +105
M482SIDAE 512 160 Configurable 4 16 52 4 6+3 3 4 1 3 2 - 2 1 1 √ FS - 24 1 2 2 16-ch 2 √ 2 √ - LQFP64 -40 to +105
M482KIDAE 512 160 Configurable 4 16 100 4 6+3 3 4 1 3 2 - 2 1 1 √ FS - 24 2 2 3 16-ch 2 √ 2 √ - LQFP128 -40 to +105
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/OTim
er (32-bit)
Connectivity
Quad SPI
SPI Master
EBI
USB O
TG
Ethernet MAC
PWM
4(16-bit)EC
APAnalog C
omp.
OP Am
p.
ADC
(12-bit)
DAC
(12-bit)
VAI
QEI
RTCC
rypto Engine
PackageOperating
Temp. Range (°C )
LPUART
1
ISO-7816-3
2SPI/I²S I²S I²CU
SCI 3
CAN
SD H
ost
M483SGAAE 256 96 Configurable 4 16 44 4 6+3 3 4 1 3 2 2 2 1 1 √ HS - 24 1 2 2 16-ch 2 √ 2 √ - LQFP64 -40 to +105
M483SIDAE 512 160 Configurable 4 16 44 4 6+3 3 4 1 3 2 2 2 1 1 √ HS - 24 1 2 2 16-ch 2 √ 2 √ - LQFP64 -40 to +105
M483KIDAE 512 160 Configurable 4 16 100 4 6+3 3 4 1 3 2 2 2 1 1 √ HS+FS - 24 2 2 3 16-ch 2 √ 2 √ - LQFP128 -40 to +105
1. Marked in the table (6+3) means 6x UART+ 3x ISO-7816 UART. UART0 and UART1 both support LIN function.2. ISO-7816 supports full duplex UART mode.3. USCI supports UART, SPI and I²C mode.4. Twelve Enhanced PWM with twelve 16-bit timers and twelve Basic PWM with two 16-bit timers.5. Support crystal-less USB in device mode.
1. Marked in the table (6+3) means 6x UART+ 3x ISO-7816 UART. UART0 and UART1 both support LIN function.2. ISO-7816 supports full duplex UART mode.3. USCI supports UART, SPI and I²C mode.4. Twelve Enhanced PWM with twelve 16-bit timers and twelve Basic PWM with two 16-bit timers.
Development Tools: NK-PFMM487Mass Production Programmer: NG-M480Z/ NG-M480L/ NG-M480S/ NG-M480K/ NG-M480J
Development Tools: NK-PFMM487Mass Production Programmer: NG-M480Z/ NG-M480L/ NG-M480S/ NG-M480K/ NG-M480J
NuM
icro® Fam
ily - Arm
® Cortex
®-M4 M
CU
s
32 33
High Perform
ance Line
● M484 Series
● M485 Series
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/OTim
er (32-bit)
Connectivity
Quad SPI
SPI Master
EBI
USB O
TG
Ethernet MAC
PWM
4(16-bit)EC
APAnalog C
omp.
OP Am
p.
ADC
(12-bit)
DAC
(12-bit)
VAIQ
EIRTC
Crypto Engine
PackageOperating
Temp. Range (°C )
LPUART
1
ISO-7816-3
2SPI/I²S I²S I²CU
SCI 3
CAN
SD H
ost
M484SGAAE 256 96 Configurable 4 16 44 4 6+3 3 4 1 3 2 - 2 1 1 √ HS - 24 1 2 2 16-ch 2 √ 2 √ - LQFP64 -40 to +105
M484SGAAE2U 256 96 Configurable 4 16 44 4 6+3 3 4 1 3 2 - 2 1 1 √ HS+FS - 24 1 2 2 16-ch 2 √ 2 √ - LQFP64 -40 to +105
M484SIDAE 512 160 Configurable 4 16 44 4 6+3 3 4 1 3 2 - 2 1 1 √ HS - 24 1 2 2 16-ch 2 √ 2 √ - LQFP64 -40 to +105
M484SIDAE2U 512 160 Configurable 4 16 44 4 6+3 3 4 1 3 2 - 2 1 1 √ HS+FS - 24 1 2 2 16-ch 2 √ 2 √ - LQFP64 -40 to +105
M484KIDAE 512 160 Configurable 4 16 100 4 6+3 3 4 1 3 2 - 2 1 1 √ HS+FS - 24 2 2 3 16-ch 2 √ 2 √ - LQFP128 -40 to +105
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/OTim
er (32-bit)
Connectivity
Quad SPI
SPI Master
EBI
USB O
TG
Ethernet MAC
PWM
4(16-bit)EC
APAnalog C
omp.
OP Am
p.
ADC
(12-bit)
DAC
(12-bit)
VAIQ
EIRTC
Crypto Engine
PackageOperating
Temp. Range (°C )
LPUART
1
ISO-7816-3
2SPI/I²S I²S I²CU
SCI 3
CAN
SD H
ost
M485ZIDAE 512 160 Configurable 4 16 26 4 6+3 3 3 1 3 2 - 1 1 1 - FS - 24 - 2 1 10-ch 2 √ 1 √ √ QFN33 -40 to +105
M485LIDAE 512 160 Configurable 4 16 41 4 6+3 3 3 1 3 2 - 2 1 1 √ FS - 24 1 2 2 12-ch 2 √ 2 √ √ LQFP48 -40 to +105
M485SIDAE 512 160 Configurable 4 16 44 4 6+3 3 4 1 3 2 - 2 1 1 √ HS - 24 1 2 2 16-ch 2 √ 2 √ √ LQFP64 -40 to +105
M485KIDAE 512 160 Configurable 4 16 100 4 6+3 3 4 1 3 2 - 2 1 1 √ HS+FS - 24 2 2 3 16-ch 2 √ 2 √ √ LQFP128 -40 to +105
1. Marked in the table (6+3) means 6x UART+ 3x ISO-7816 UART. UART0 and UART1 both support LIN function.2. ISO-7816 supports full duplex UART mode.3. USCI supports UART, SPI and I²C mode.4. Twelve Enhanced PWM with twelve 16-bit timers and twelve Basic PWM with two 16-bit timers.
1. Marked in the table (6+3) means 6x UART+ 3x ISO-7816 UART. UART0 and UART1 both support LIN function.2. ISO-7816 supports full duplex UART mode.3. USCI supports UART, SPI and I²C mode.4. Twelve Enhanced PWM with twelve 16-bit timers and twelve Basic PWM with two 16-bit timers.
Development Tools: NK-PFMM487Mass Production Programmer: NG-M480Z/ NG-M480L/ NG-M480S/ NG-M480K/ NG-M480J
Development Tools: NK-PFMM487Mass Production Programmer: NG-M480Z/ NG-M480L/ NG-M480S/ NG-M480K/ NG-M480JDevelopment Tools: NK-PFMM487
● M487 Series
Part No.
Flash(Kbytes)
SRAM
(Kbytes)
Data Flash(Kbytes)
ISP RO
M(Kbytes)
PDM
A
I/OTim
er (32-bit)
Connectivity
Quad SPI
SPI Master
EBI
USB O
TG
Ethernet MAC
PWM
4(16-bit)EC
APAnalog C
omp.
OP Am
p.
ADC
(12-bit)
DAC
(12-bit)
VAIQ
EIRTC
Crypto Engine
PackageOperating
Temp. Range (°C )
LPUART
1
ISO-7816-3
2SPI/I²S I²S I²CU
SCI 3
CAN
SD H
ost
M487SIDAE 512 160 Configurable 4 16 44 4 6+3 3 4 1 3 2 2 2 1 1 √ HS √ 24 1 2 2 16-ch 2 √ 2 √ √ LQFP64 -40 to +105
M487KIDAE 512 160 Configurable 4 16 100 4 6+3 3 4 1 3 2 2 2 1 1 √ HS+FS √ 24 2 2 3 16-ch 2 √ 2 √ √ LQFP128 -40 to +105
M487JIDAE 512 160 Configurable 4 16 114 4 6+3 3 4 1 3 2 2 2 1 1 √ HS+FS √ 24 2 2 3 16-ch 2 √ 2 √ √ LQFP144 -40 to +105
1. Marked in the table (6+3) means 6x UART+ 3x ISO-7816 UART. UART0 and UART1 both support LIN function.2. ISO-7816 supports full duplex UART mode.3. USCI supports UART, SPI and I²C mode.4. Twelve Enhanced PWM with twelve 16-bit timers and twelve Basic PWM with two 16-bit timers.Development Tools: NK-PFMM487Mass Production Programmer: NG-M480Z/ NG-M480L/ NG-M480S/ NG-M480K/ NG-M480J
NuM
icro® Fam
ily Arm
9 MPU
s
34 35
NuMicro® Family Arm9 MPUsNuvoton provides a series of network connected processors base on the Arm926 core, featuring rich peripherals beneficial to customer's innovative design and timely implementation. Each platform is provided with a complete development environment. The source code of BSP drivers under Linux are provided to shorten the design cycle times. The targeted applications range from devices that require network connectivity, USB connectivity, user interface devices, as well as industrial control, such as IoT Gateway, POS, HMI, IP camera, etc.
Video Line● N3290 Series
Part No.
Core Memory I/F USB H/W Accelerator LCD Analog Peripheral Power PKG
Max Speed (M
Hz)
I Cache (KB)
D C
ache (KB) SR
AM (KB)
Stacked SDR
AM (M
B)
SPI Flash I/F R
aw N
AND
I/F, ECC
bitsSD
/ SDIO
6 1.1 H
ost (12 Mbps)
2.0 Host (480 M
bps)D
evice (FS / HS)
2D G
FX
JPEG C
odec
Video Codec
Parallel RG
B LCD
Color
(bits)
Max. R
esolution3
SAR AD
C AD
C for M
IC Input
Touch Panel (Wire)
Stereo DAC
(bits) JTAG
Ethernet MAC
CM
OS Sensor 1
GPIO
(Max)
UART
I²C
SPI 4
RTC
PWM I²S
Mem
Voltage (V)
Core Voltage (V)
I/O Voltage (V)
Package
N32901R1DN 200 8 8 8 2MB SDR √ 15 1 1 - HS - √ MJPEG2
Codec - - √ √ - 16 - - √ 34 2 - 2 - 2 √ 3.3 1.8 3.3 LQFP64(MCP)
N32901U1DN 200 8 8 8 2MB DR √ 15 3 1 - HS BitBLT √ MJPEG2
Codec 18 QVGA √ √ 4 16 √ - √ 64 2 1 2 √ 4 √ 3.3 1.8 3.3 LQFP128(MCP)
N32903R1DN 200 8 8 8 8MB SDR √ 15 1 1 - HS - √ MJPEG2
Codec - - √ √ - 16 - - √ 34 2 - 2 - 2 √ 1.8 1.8 3.3 TQFP64(MCP)
N32903U1DN 200 8 8 8 8MB SDR √ 15 3 1 - HS BitBLT √ MJPEG2
Codec 18 VGA5 √ √ 4 16 √ - √ 64 2 1 2 √ 4 √ 1.8 1.8 3.3 LQFP128(MCP)
N32905R3DN 200 8 8 8 32MB SDR √ 15 1 1 - HS - √ MJPEG2
Codec - - √ √ - 16 - - √ 34 2 - 2 - 2 √ 1.8 1.8 3.3 TQFP64(MCP)
N32905U3DN 200 8 8 8 32MB SDR √ 15 3 1 - HS BitBLT √ MJPEG2
Codec 18 VGA5 √ √ 4 16 √ - √ 64 2 1 2 √ 4 √ 1.8 1.8 3.3 LQFP128(MCP)
1 CMOS sensor: CCIR601 / CCIR656 I/F, 2M pixel.2 MJPEG: Motion JPEG Codec, VGA 30fps.3 Resolution: QVGA (320x240), VGA (640x480).4 Only one hardware SPI controller to support two SPI device with two chip selection signals.5 XGA is for still image only. For video, N3290x is MJPEG [email protected] N3290x has only one hardware host controller.Development Tools: ND-N32905 (N32901,N32903,N32905)
● N3292 Series
Part No.
Core Memory I/F USB H/W Accelerator LCD Analog Peripheral Power PKG
Max Speed (M
Hz)
I Cache (KB)
D C
ache (KB) SR
AM (KB)
Stacked SDR
AM (M
B)
SPI Flash I/F R
aw N
AND
I/F, ECC
bitsSD
/ SDIO
5 1.1 H
ost (12 Mbps)
2.0 Host (480 M
bps)D
evice (FS / HS)
2D G
FX
JPEG C
odec
Video Codec
2
Parallel RG
B LCD
Color
(bits)
Max. R
esolution3
SAR AD
C6
Σ-Δ AD
C (bits)
ADC
for MIC
Input Touch Panel (W
ire)
Stereo DAC
(bits) JTAG
Ethernet MAC
CM
OS Sensor 1
GPIO
(Max)
UART I²C
SPI 4
RTC PW
M TV O
utputI²S
Mem
Voltage (V)
Core Voltage (V)
I/O Voltage (V)
Package
N32923U1DN 240 8 8 8 8MB SDR √ 24 3 1 1 HS BitBLT √
H.264 CodecMJPEG Codec
24 XGA 7 16 √ 4/5 16 √ √ √ 80 2 1 2 √ 4 √ √ 1.8 1.2 3.3 LQFP128(MCP)
N32925U3DN 240 8 8 8 32MB SDR √ 24 3 1 1 HS BitBLT √
H.264 CodecMJPEG Codec
24 XGA 7 16 √ 4/5 16 √ √ √ 80 2 1 2 √ 4 √ √ 1.8 1.2 3.3 LQFP128(MCP)
N32926U1DN 240 8 8 8 64MB SDR √ 24 3 1 1 HS BitBLT √
H.264 CodecMJPEG Codec
24 XGA 7 16 √ 4/5 16 √ √ √ 80 2 1 2 √ 4 √ √ 1.8 1.2 3.3 LQFP128(MCP)
N32926O2DN 240 8 8 8 64MB SDR √ 24 2 1 1 HS - √
H.264 CodecMJPEG Codec
24 - 2 16 √ - 16 √ √ √ 54 2 1 2 - 4 √ √ 1.8 1.2 3.3 QFN88(MCP)
1 CMOS sensor: CCIR601 / CCIR656 I/F, 3M pixel.2 MJPEG: Motion JPEG Codec, VGA 30fps.; H.264 Codec: support H.264 BP 720P upto 25fps.3 XGA is for still image only.4 Only one hardware SPI controller to support two SPI device with two chip selection signals.5 N3292x has two hardware host controllers.6 N3292x supports 12-bit SARADC.Development Tools: ND-N32926 (N32923,N32925,N32926)
Video Line
NuM
icro® Fam
ily Arm
9 MPU
s
34 35
Industrial Line
● NUC970 Series
Part No.
Max Speed (M
Hz)
I Cache (KB)
D C
ache (KB)
Security against piracy
Stack DD
R Size (M
B)
SRAM
(KB) N
OR
Flash I/F SPI Flash Boot
NAN
D Flash, N
o. of ECC
bits
eMM
C I/F
SD / SD
IO Ethernet 10/100 M
AC U
SB 2.0 HS H
ost U
SB 2.0 HS D
evice 2D
Graphics
Parallel RG
B LCD
Color (bit)
Real-Tim
e Clock (RTC
)Tim
er (32-bit)W
atchdog Timer
Window
Watchdog Tim
erPW
M
ADC
Touch Screen Controller
GPIO
(Max)
UART
CAN
BUS I²C
SPIISO
-7816-3C
MO
S Interface I²S/AC
97Package
Operating Temp.
Range (°C )
NUC972DF71Y 300 16 16 √ 128 56 - √ 24 √ 2 2 2 1 √ 24 √ 5 √ √ 4 12-bit 8-ch √ 146 11 - 2 2 2 √ 1 LQFP216 -40 to +85
NUC972DF61YC 300 16 16 √ 64 56 - √ 24 √ 2 2 2 1 √ 24 √ 5 √ √ 4 12-bit 8-ch √ 146 11 2 2 2 2 √ 1 LQFP216 -40 to +85
NUC972DF62Y 300 16 16 √ 64 56 - √ 24 √ 2 2 2 1 √ 24 √ 5 √ √ 4 12-bit 8-ch √ 146 11 2 2 2 2 √ 1 LQFP216 -40 to +85
NUC972DF61Y 300 16 16 √ 64 56 - √ 24 √ 2 2 2 1 √ 24 √ 5 √ √ 4 12-bit 8-ch √ 146 11 - 2 2 2 √ 1 LQFP216 -40 to +85
NUC972DF51Y 300 16 16 √ 32 56 - √ 24 √ 2 2 2 1 √ 24 √ 5 √ √ 4 12-bit 8-ch √ 146 11 2 2 2 2 √ 1 LQFP216 -40 to +85
NUC975DK61Y 300 16 16 √ 64 56 - √ 24 √ 2 1 2 1 - - - 5 √ √ 2 12-bit 4-ch √ 87 10 - 2 2 2 √ 1 LQFP128 -40 to +85
NUC975DK51Y 300 16 16 √ 32 56 - √ 24 √ 2 1 2 1 - - - 5 √ √ 2 12-bit 4-ch √ 87 10 - 2 2 2 √ 1 LQFP128 -40 to +85
NUC975DK41Y 300 16 16 √ 16 56 - √ 24 √ 2 1 2 1 - - - 5 √ √ 2 12-bit 4-ch √ 87 10 - 2 2 2 √ 1 LQFP128 -40 to +85
NUC976DK61YC 300 16 16 √ 64 56 - √ - √ 2 1 2 1 √ 16 √ 5 √ √ 4 12-bit 4-ch √ 80 6 1 2 2 2 √ 1 LQFP128 -40 to +85
NUC976DK61Y 300 16 16 √ 64 56 - √ - √ 2 1 2 1 √ 16 √ 5 √ √ 4 12-bit 4-ch √ 80 6 - 2 2 2 √ 1 LQFP128 -40 to +85
NUC976DK51Y 300 16 16 √ 32 56 - √ - √ 2 1 2 1 √ 16 √ 5 √ √ 4 12-bit 4-ch √ 80 6 1 2 2 2 √ 1 LQFP128 -40 to +85
NUC976DK41Y 300 16 16 √ 16 56 - √ - √ 2 1 2 1 √ 16 √ 5 √ √ 4 12-bit 4-ch √ 80 6 1 2 2 2 √ 1 LQFP128 -40 to +85
NUC977DK61YC 300 16 16 √ 64 56 - √ 24 √ 2 1 2 1 √ 16 √ 5 √ √ 4 - - 87 8 1 2 2 2 √ 1 LQFP128 -40 to +85
NUC977DK61Y 300 16 16 √ 64 56 - √ 24 √ 2 1 2 1 √ 16 √ 5 √ √ 4 - - 87 8 - 2 2 2 √ 1 LQFP128 -40 to +85
NUC977DK51Y 300 16 16 √ 32 56 - √ 24 √ 2 1 2 1 √ 16 √ 5 √ √ 4 - - 87 8 1 2 2 2 √ 1 LQFP128 -40 to +85
NUC977DK41Y 300 16 16 √ 16 56 - √ 24 √ 2 1 2 1 √ 16 √ 5 √ √ 4 - - 87 8 - 2 2 2 √ 1 LQFP128 -40 to +85
NUC978DK41Y 300 16 16 √ 16 56 - √ 24 √ 2 1 2 1 √ 16 √ 5 √ √ 4 12-bit 5-ch √ 86 9 - 2 2 2 √ 1 LQFP128 -40 to +85
Development Tools: ND-NUC972 (NUC972, NUC976, NUC977)
Industrial Line
NuMicro
® Family 8051 M
CUs
36 37
NuMicro® Family 8051 MCUsAs a leading supplier of 8051 microcontrollers (MCUs), Nuvoton offers a variety of products with the best-in-class price/performance critical to the success of consumers and industrial products. The 8-bit MCU comes equipped with richperipherals to meet various system requirements and is supported by the tool chain from world leading tool makers forrapid product development.
Low Pin Count LineThe Nuvoton Low Pin Count 8051 series supports operating voltage from 2.4V to 5.5V and operating temperature from -40℃ to 85℃. It also supports 22.1184 MHz internal oscillator (1% accuracy at 25℃, 5V), undervoltage detector, configurable data Flash, and high immunity (8KV ESD, 4KV EFT). Package types include TSSOP20, TSSOP28, DIP20, SOP20, SOP28, and SOP16.
Standard LineThe Nuvoton standard 8051 series is pin-compatible with traditional 12T 8051 and operating at 2.4V to 5.5V and -40℃ to 85℃, and provides 22.1184 MHz internal oscillator (1% accuracy at 25℃, 5V) , data Flash configurable and high immunity (8KV ESD, 4KV EFT). Package types include LQFP48, PLCC44, PQFP44, TQFP44 and DIP40.
Low Pin Count Line
Part No. Flash (Kbytes)
SRAM
(bytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Tim
er (16-bit)
Connectivity
Com
p.PWM ADC IN
T
ICPIAPISP
Special Function PackageOperating
Temp. Range (°C )
UART
SPI
I²CN76E003 18 1K Configurable √ up to
18 4 2 1 1 - 6*16-bit 8x12-bit 2 √ 1T 8051, 16 MHz HIRC, BOR, on-chip debugger
TSSOP20/QFN20
-40°C to +105°C
N76E616 18 512 Configurable √ up to 46
up to 7 2 - 1 - 4*16-bit 8*10-bit 2 √
1T 8051, 11.0592 MHz HIRC, BOR, on-chip debugger
LCD driver: 4COM x 32SEG/6COM x 30SEG
LQFP48QFP44
-40°C to +105°C
N76E885 18 512 Configurable √ up to 26 4 2 1 1 - 8*12-bit 10*10-bit 2 √ 1T 8051, 22.1184 MHz HIRC, BOR,
on-chip debuggerTSSOP28/TSSOP20
-40°C to +105°C
● N76E Series
Development Tools: NT-N76E003 / NT-N76E616 / NT-N76E885, Nu-Link
Part No. Flash (Kbytes)
SRAM
(bytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Tim
er(16-bit)
-Connectivity
Com
p.
PWM
ADC INT
ICPIAPISP
Special Function Package Operating Temp. Range (°C )
UART
SPI
I²C
N79E715 16 512 Configurable 2 up to 25 3 1 1 1 - 4 8*10-bit 2 √ 22.1184 MHz internal RC, KBI, BORTSSOP28/TSSOP20/
SOP16-40°C to +85°C
N79E855 16 512 Configurable 2 25 3 1 1 1 - 4 7*10-bit 2 √ 22.1184 MHz internal RC, KBI, BOR TSSOP28 -40°C to +85°C
N79E854 8 512 Configurable 2 25 3 1 1 1 - 4 7*10-bit 2 √ 22.1184 MHz internal RC, KBI, BOR TSSOP28 -40°C to +85°C
N79E845 16 512 4K 2 17 3 1 1 1 - 4 7*10-bit 2 √ 22.1184 MHz internal RC, KBI, BOR TSSOP20 -40°C to +85°C
N79E844 8 512 4K 2 17 3 1 1 1 - 4 7*10-bit 2 √ 22.1184 MHz internal RC, KBI, BOR TSSOP20 -40°C to +85°C
N79E8432 4 512 4K 2 13 3 1 - 1 - 4 4*10-bit 2 √ 22.1184 MHz internal RC, KBI, BOR SOP16 -40°C to +85°C
Part No. Flash (Kbytes)
SRAM
(bytes)
Data Flash(Kbytes)
ISP ROM
(Kbytes)I/O Tim
er (16-bit)
-Connectivity
Com
p.
PWM
ADC INT
ICPIAPISP
Special Function Package Operating Temp. Range (°C )
UART
SPI
I²C
W79E2051 2 256 128 - 17 2 1 - - 1 1*10-bit - 9 ICP 22.1184 MHz internal RC, WDT, BOR
SSOP20/SOP20/PDIP20 -40°C to +85°C
W79E4051 4 256 128 - 17 2 1 - - 1 1*10-bit - 9 ICP 22.1184 MHz internal RC, WDT, BOR
SSOP20/SOP20/PDIP20 -40°C to +85°C
W79E8213 4 128 128 - 18 2 1 - - 1 4*10-bit 8*10-bit 9 ICP 22.1184 MHz internal RC, WDT, BOR
SSOP20/SOP20/PDIP20 -40°C to +85°C
● N79E Series
● W79E Series
Development Tools: NT-N79E715, ISP-ICP Programmer (NWR-005)
Development Tools: ISP-ICP Programmer (NWR-005)
Low Pin C
ount Line
NuMicro
® Family 8051 M
CUs
36 37
Standard Line
Part No. Flash (Kbytes)
SRAM
(bytes)
Data Flash
ISP RO
M
I/O Timer
(16-bit)
Connectivity
Com
p.
PWM
(8-bit)
ADC
(10-bit)
INT
ISP Special Function Package Operating Temp. Range (°C )
UART
SPI
I²C
N78E055A 16 256+1K 4 2.5 up to 40 3 1 1 - - 5 - 4 √ 6T/12T option, Extra I/O port, 22.1184 MHz internal RC, BOR
PLCC44/PQFP44/LQFP48/DIP40 -40°C to +85°C
N78E059A 32 256+1K 4 2.5 up to 40 3 1 1 - - 5 - 4 √ 6T/12T option, Extra I/O port, 22.1184 MHz internal RC, BOR
PLCC44/PQFP44/LQFP48/DIP40 -40°C to +85°C
N78E517A 64 256+1K Configurable 2.5 up to 40 3 1 1 - - 5 - 4 √ 6T/12T option, Extra I/O port, 22.1184 MHz internal RC, BOR
PDIP40/PLCC44/PQFP44/LQFP48
/TQFP44 -40°C to +85°C
N78E366A 64 256+1K - 2.5 up to 40 3 1 1 - - 5 - 4 √ 6T/12T option, Extra I/O port, 22.1184 MHz internal RC, BOR
PLCC44/PQFP44/LQFP48/DIP40 -40°C to +85°C
Part No. Flash (Kbytes)
SRAM
(bytes)
Data Flash ISP ROM I/O Tim
er (16-bit)
Connectivity
Com
p.
PWM
(8-bit)
ADC(10-bit) IN
T
ISP Special Function Package Operating Temp. Range (°C )
UART
SPI
I²C
W77E058 32 256 1K - up to 36 3 2 - - - - - 12 - Dual DPTRs, WDT PDIP40/PLCC44/PQFP44/LQ -40°C to +85°C
W77E516 64 256 1K 4 up to 36 3 2 - - - - - 12 √* Dual DPTRs, WDT PDIP40/PLCC44/PQFP44/LQ -40°C to +85°C
W77E532 128 256 1K 4 up to 36 3 2 - - - - - 12 √* Dual DPTRs, WDT PDIP40/PLCC44/PQFP44/LQ -40°C to +85°C
Part No. Flash (Kbytes)
SRAM
(bytes)
Data Flash ISP ROM I/O Tim
er (16-bit)
Connectivity
Com
p.
PWM
(8-bit)
ADC(10-bit) IN
T
ICP Special Function Package Operating Temp. Range (°C )
UART
SPI
I²CN79E352R 8 256 128 - up to 38 3 1 - 1 - 2 - 2 √ 22.1184 MHz internal RC,
KBI, BORPDIP40/LQFP48 -40°C to +85°C
● N78E Series
● N79 Series
● W77 Series
√* indicates that boot code is not pre-installed.
Development Tools: ISP-ICP Programmer (NWR-005)
Development Tools: ISP-ICP Programmer (NWR-005)
Part No. Flash (Kbytes)
SRAM
(bytes)ISP
ROM(Kbytes)
I/O Timer
(16-bit)
Connectivity
Com
p.
PWM
(8-bit)
ADC(10-bit) INT ISP Special Function Package Operating Temp.
Range (°C )
UART
SPI
I²C
W78E052D 8 256 2 up to 36 3 1 - - - - - 4 √ 6T/12T option, Extra I/O port PDIP40/PLCC44/PQFP44/LQFP48//TQFP44 -40°C to +85°C
W78E054D 16 256 2 up to 36 3 1 - - - - - 4 √ 6T/12T option, Extra I/O port PDIP40/PLCC44/PQFP44/LQFP48//TQFP44 -40°C to +85°C
W78E058D 32 512 4 up to 36 3 1 - - - - - 4 √ 6T/12T option, Extra I/O port PDIP40/PLCC44/PQFP44/LQFP48 -40°C to +85°C
W78E516D 64 512 4 up to 36 3 1 - - - - - 4 √ 6T/12T option, Extra I/O port PDIP40/PLCC44/PQFP44/LQFP48 -40°C to +85°C
Part No. Flash (Kbytes)
SRAM
(bytes)
DataFlash
(bytes)
ISP ROM
(Kbytes)I/O Tim
er (16-bit)
-Connectivity
Com
p.
PWM
(8-bit)
ADC(10-bit) INT ISP Special Function Package Operating Temp.
Range (°C )
UART
SPI
I²C
W79E632A 128 256+1K - 4 up to 36 3 1 - - - 6 - 2 √* Extra I/O port PLCC44/PQFP44 -40°C to +85°C
W79E633A 128 256+1K - 4 up to 36 3 1 - 2 - 6 4 2 √* Extra I/O port PLCC44/PQFP44 -40°C to +85°C
W79E658A 128 256+1K - 4 up to 36 3 1 - 2 - 6 8 2 √* JTAG interface, Extra I/O port PQFP100 -40°C to +85°C
● W78 Series
● W79 Series
√* indicates that boot code is not pre-installed.
Development Tools: ISP-ICP Programmer (NWR-005)
Standard Line
The NuM
icro® Fam
ily Ecosystem
38 39
The NuMicro® Family Ecosystem
Nuvoton offers powerful development tools to support customers in development, production and upgrades. We provide: - Multiple development kits to suit various production types;- Rich online resources;- Hardware/software support;- Open source tool to support product upgrades via multiple communication interfaces.
Development PlatformsNuvoton offers distinctive evaluation boards and a variety of debug tools to shorten the development time. Each evaluation board includes a Nu-Link-Me ICE adaptor, so no additional debug equipments is needed.
The NuTiny Board is a simple, easy to use evaluation/development kit supported by IAR EWARM and Keil RVMDK environment. Its compact size is applicable for all types of product development. The Nu-Link-Me ICE adaptor is also included.
● NuTiny Board
The Nu-Learning Board includes rich functional blocks that connects to the embedded microcontroller. With the functional blocks, users can develop and verify applications to emulate the real behavior. It can be used as a real system controller to design users’ target systems. The Nu-Link-Me ICE adapter is also included for easy debug.
● Nu-Learning Board
The NuEdu Board is a convenient starter kit pin-compatible with Arduino and supports the Keil RVMDK environment and online ICP (In-Circuit Programming). The UNO interface allows users to add different modules to the board base on various development needs, offering more flexibility. The kit includes examples with source code and the Nu-Link-Me ICE adaptor.
● NuEdu Board
The NuM
icro® Fam
ily Ecosystem
38 39
NuMaker Platforms
The NuMaker-PFM M487 is a powerful platform operating at up to 192 MHz. It is embedded with dual-bank 512 KB Flash and 160 KB SRAM. Supported features include: execution code from external 2 MB SPI Flash, high speed USB OTG, full speed USB OTG, SD card reader, Ethernet connection and playing audio files with on-board audio codec. The NuMaker-PFM M487 also offers Arduino UNO compatible interface for working with Arduino modules.
I. NuMaker-PFM-M487 (NK-BEDM487)
● Arm® Mbed Enabled™ NuMaker Platforms
The Arm® Cortex®-M processor family-based platforms feature communication gateways, routers and sensors. The platforms can either be used as stand-alone devices or freely combined with other platforms for faster IoT solution creation and deployment.
The NuMaker Mbed Enabled™ Platforms are Internet of Things (IoT) application focused platforms specially developed by Nuvoton. Embedded with the Arm® Cortex®-M4F/M0 core, it supports Arm® Mbed OS 5 as well as Arduino interface, and is ideal for arrays of IoT application development for prototype development designs with sensors and wireless modules. The user-friendly input interface provided by Nuvoton enables fast verification, learning, and application development by developers for easy IoT application creation.
The NuMaker-PFM NUC472 is designed to tackle complex computing requirements and cloud network protocol. It runs up to 84 MHz, and is embedded with 512 KB Flash and 64 KB SRAM. An external 1 MB SRAM and an Ethernet RJ-45 port is onboard to support complex cloud network protocols.
The NuMaker-PFM M453 platform is equipped with security, communication, and device management modules and supports low-power Bluetooth, Thread, Wi-Fi, 802.15.4/6LoWPAN, TLS/DTLS, CoAP, HTTP, MQTT and lightweight M2M. Embedded with 256 KB Flash and 32 KB SRAM, it is ideal for IoT equipment operation. NuMaker-PFM-M453 may be employed as a collection point or sensor node to securely connect to Mbed cloud service for equipment connection and management. This allows tiny amounts of data to be collected locally to cloud through the Mbed server software for valuable information generation with big data analysis technique. It uses general purpose interface and is Arduino UNO compatible. Users may develop their own application by working with any Arduino modules.
The NuMaker-PFM Nano130 uses the Cortex®-M0 core and operates at up to 42 MHz. It is embedded with 128 KB Flash and 16 KB SRAM. The platform is specially designed for devices that require ultra-low power consumption. Plenty of peripherals are also included: Timers, RTC, USB, PDMA, UART, SPI, I²C, I²S, PWM, GPIO, ADC, DAC, EBI, LCD driver, temperature sensor, etc.
II. NuMaker-PFM NUC472 (NK-BEDNUC472)
III. NuMaker-PFM M453 (NK-BEDM453)
IV. NuMaker-PFM Nano130 (NK-BEDNANO130)
The NuM
icro® Fam
ily Ecosystem
40 41
The NuMaker Uni is an IoT application development board based on the NuMicro® NANO100NE3BN microcontroller. With small dimensions of 3.5cm by 3.5cm, it is especially suitable for wearable devices. It integrates the 802.11 b/g/n Wi-Fi module and bluetooth module, as well as four instantly operable modules including the accelerometer, temperature-humidity sensor, IR tranceiver and RGB LED light. The kit also includes complete source-code examples, which helps users to build target C code applications quickly. The NuMaker Uni leaves 20 multifunctional pins unprogrammed to allow more flexibility in design. While the MCU enters Power-down mode, it consumes less than 1uA.
● NuMaker Uni (NK-UNI000)
The Nuvoton Quadcopter Kit includes a flight control board, a joystick, a 2.4G RF module, and a section board with a Nu-Link-Me emulator that employs Nuvoton's Cortex®-M4 development board. This package is furnished with a complete Attitude Heading and Reference System (AHRS) Library to facilitate user control. Users can easily invest valuable time in perfecting the flight controls and develop flight applications. This package supports a failsafe system (automatic landing), fixed attitude hovering system (with a barometer), and headless mode (with an electronic compass). Users can also choose from a series of airframes with different sizes and diameters as well as freely adjust the PID flight controllers and calibrate their sensors.Nuvoton's Cortex®-M4 microcontroller supports high speed ESC (400 Hz) and includes the proprietary 10-axis sensor algorithm system with sensor update frequency up to 500 Hz, allowing real-time control of flight dynamics with zero delays.
● Nuvoton Quadcopter Kit (NK-QUAD00)
The NuMaker Brick is a highly extensible, open source IoT platform including a combination of sensors and modules.The modules can work independently or be arranged in any order. Monitoring and the adjustment of parameter settings can be done via the NuBrick App on Android or iOS based mobile devices or tablet computers. Embedded with the NuMicro® M451 microcontroller, it is able to perform powerful computing functions and to quickly process large amounts of data. An extension board and the Nu-Link-Me ICE adapter are also included to allow more flexibilty in design.
● NuMaker Brick (NK-BRICK00)
The NuMaker Uno is Arduino compatible and its function can be extended with Arduino add-ons. With Arduino IDE, users can develop applications and leverage large number of open source samples. It is a specific development tool for NuMicro® Cortex®-M0 series by which users can develop and verify the application program easily. It supports various peripheral functions such as ADC, PWM, I²C and SPI, allowing more flexibility in design. The Nu-Link debugger/programmer is also included in the kit.
● NuMaker Uno (NK-UNO-131)
The NuM
icro® Fam
ily Ecosystem
40 41
Debugger & Programmer
The Nuvoton ICE adapter Nu-Link-Me is included in all evaluation development boards. It connects the PC's USB port to the target system and allows users to program and debug embedded programs on the target hardware. It supports Keil RVMDK/IAR EWARM environment, online ICP and there is no need to install additional debug hardware. The Nu-Link-Me V3.0 also supports VCOM function, which gives users more flexibility for debugging. (Not for retail sale)
Nuvoton’s Nu-Link Debug Adapter is an USB debugger/programmer and can be applied to the development of NuMicro® Family microcontrollers. It supports online/offline ICP (In-Circuit Programming) based on the SWD (Serial Wire Debug) signal interface. Users can employ the NuMicro® ICP Programming Tool to update chip firmware for mass production. It also supports third-party development tools, such as Keil RVMDK and IAR EWARM.
● Nu-Link-Me
● Nu-Link
The Nu-Link-Pro is able to detect the VDD input level of a target chip automatically. It supports all of Nu-Link's features plus programmable output VDD (1.8V, 2.5V, 3.3V, 5.0V) and wide target VDD input level (1.8V-5.5V).
● Nu-Link-Pro
Programmer
A programmar designed for 8051 Family microcontrollers.
● ISP + ICP Tool
Software Development
The NuGang Programmer provides the four-chip gang programming functionality, which is specially designed for mass-production in the customer site. The offline programming function is available once programming data has been downloaded.
Nuvoton provides a variety of programming/debug tools that support the IAR EWARM and Keil RVMDK environment.
● NuGang
42 43
Official Site
Nuvoton eStorehttps://direct.nuvoton.com
NuMicro® Family Products
Cortex®-M0/M4 MCUwww.nuvoton.com/M0www.nuvoton.com/M4
Arm7/Arm9 MPUwww.nuvoton.com/Arm7www.nuvoton.com/Arm9
8051 MCUwww.nuvoton.com/8051
Technical Supporting Forums
Nuvoton MCU Forum - Englishhttp://forum.nuvoton.com
21IC Forum - Simplified Chinesebbs.21ic.com/iclist-187-1.html
Contact Us
www.nuvoton.com