o pensensor e xercise 2

1
opensensor - information material Aalborg University, Mobile Device Group Fitzek/Rein/Grauballe/Perrucci/Kroeger Aalborg University and Technical University of Berlin opensensor exercise 2 Install the nRF905 program from the web site on the opensensors (each group may need to use different frequencies). Test that the serial interface and nRF095 functionality is working. Test the indoor/outdoor range of the nRF module at the power settings: -10dB, -2dB, 6dB and 10dB. Try also to enable reduced receiver sensitivity. Optional – Mount the light sensor on the opensensor board and write a program that enables you to see the level of light.

Upload: ray-petty

Post on 31-Dec-2015

26 views

Category:

Documents


0 download

DESCRIPTION

o pensensor e xercise 2. Install the nRF905 program from the web site on the opensensors (each group may need to use different frequencies). Test that the serial interface and nRF095 functionality is working. - PowerPoint PPT Presentation

TRANSCRIPT

Page 1: o pensensor  e xercise  2

opensensor - information material Aalborg University, Mobile Device Group

Fitzek/Rein/Grauballe/Perrucci/Kroeger Aalborg University and Technical University of Berlin

opensensor exercise 2

• Install the nRF905 program from the web site on the opensensors (each group may need to use different frequencies). Test that the serial interface and nRF095 functionality is working.

• Test the indoor/outdoor range of the nRF module at the power settings: -10dB, -2dB, 6dB and 10dB. Try also to enable reduced receiver sensitivity.

• Optional – Mount the light sensor on the opensensor board and write a program that enables you to see the level of light.