objectives: chapter 2: physical layer transmission media and cabling lan physical layer ethernet...
TRANSCRIPT
![Page 1: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/1.jpg)
Objectives:
Chapter 2: Physical Layer
Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices
![Page 2: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/2.jpg)
Guided Transmission Data
• Magnetic Media
• Twisted Pair
• Coaxial Cable
• Fiber Optics
![Page 3: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/3.jpg)
Twisted Pair
(a) Category 3 UTP.(b) Category 5 UTP.
![Page 4: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/4.jpg)
Coaxial Cable
A coaxial cable.
![Page 5: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/5.jpg)
Fiber Cables
(a) Side view of a single fiber.(b) End view of a sheath with three fibers.
![Page 6: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/6.jpg)
Fiber Optics
(a) Three examples of a light ray from inside a silica fiber impinging on the air/silica boundary at different angles.
(b) Light trapped by total internal reflection.
![Page 7: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/7.jpg)
Lightwave Transmission
Convection currents can interfere with laser communication systems.
A bidirectional system with two lasers is pictured here.
![Page 8: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/8.jpg)
The Local Loop: Modems, ADSL, and Wireless
The use of both analog and digital transmissions for a computer to computer call. Conversion is done by the modems and codecs.
![Page 9: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/9.jpg)
Modems
(a) A binary signal
(b) Amplitude modulation(c) Frequency modulation
(d) Phase modulation
![Page 10: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/10.jpg)
Digital Subscriber Lines (3)
A typical ADSL equipment configuration.
![Page 11: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/11.jpg)
Wireless Communication
a) Wireless networks use radio frequency (RF), laser, infrared (IR), or satellite/microwaves to carry signals from one computer to another without a permanent cable connection.
![Page 12: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/12.jpg)
LAN Physical Layer
a)Each media has advantages and disadvantages. Some of the advantage or disadvantage comparisons concern the following: – Cable length
– Cost
– Ease of installation
– Susceptibility to interference
![Page 13: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/13.jpg)
Ethernet in the Campusa)Ethernet technologies can be used in a campus
network in several different ways:
![Page 14: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/14.jpg)
Connection Media / UTP Implementationa)EIA/TIA specifies an RJ-45 connector for unshielded twisted-pair (UTP) cable. The letters RJ stand for registered jack, and the number 45 refers to a specific wiring sequence. The RJ-45 connector and jack are the most common
![Page 15: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/15.jpg)
Attach the RJ-45
![Page 16: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/16.jpg)
Straight-Through Cables
a)Maintain the pin connection all the way through the cable.
b)Wire connected to pin 1 is the same on both ends.
c)Used to connect such devices as PCs or routers to other devices such as hubs or switches.
![Page 17: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/17.jpg)
Crossover Cable
a)Cross the critical pair to properly align, transmit, and receive signals on devices with like connections.
b)Pin 1 connected to pin 3, pin 2 connected to pin 6.
c)Used to connect similar devices: switch to switch, switch to hub, hub to hub, router to router, PC to PC.
![Page 18: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/18.jpg)
Rollover Cables Setting Up Console Connections
a) Maintain the pin connection all the way through the cable.
b) The console port allows monitoring and configuration of a Cisco hub, switch, or router.
c) Connect the devices using a rollover cable from the console port, on the router, to the serial port, on the terminal (workstation), Then Configure the terminal emulation application with the following common equipment (COM) port settings: 9600 bps, 8 data bits, no parity, 1 stop bit, and no flow control.
![Page 19: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/19.jpg)
LAN Transmission Technologies
a) Ethernet 10 Mbit/s
b) Token Ring 4/16 Mbit/s
c) Fast Ethernet 100 Mbit/s
d) FDDI 100 Mbit/s
e) Gigabit Ethernet 1 Gbit/s
f) ATM 25 Mbit/s to 2.4 Gbit/s
Only Ethernet versions are growing
![Page 20: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/20.jpg)
1- IEEE 802.3z 2- IEEE 802.3ab
1- Fiber Cabling Specifications 2- Copper Cabling Specifications
Gigabit Ethernet Standards
![Page 21: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/21.jpg)
WAN Technologies
a) A Wide Area Network (WAN) is a data communications network that covers a relatively broad geographic area and often uses transmission facilities provided by common carriers, such as telephone companies.
b) A WAN is an interconnection of LANs.
c) A WAN functions at the lower three layers of the OSI model.
![Page 22: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/22.jpg)
WAN Physical Layer
a) The speed of these connections ranges from 2400 bits per second (bps) to T1 service at 1.544 megabits per second (Mbps) and E1 service at 2.048 Mbps.
b) ISDN offers dial-on-demand connections or dial backup services.
c) With the increasing demand for residential broadband high-speed services, Digital Subscriber Line (DSL) and cable modem connections are becoming more popular.
![Page 23: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/23.jpg)
WAN Backbones
a) T1 (DS1) 1.54 Mbit/s North Americab) E1 2.04 Mbit/s CCITTc) E3 34.36 Mbit/s CCITTd) T3 (DS3) 44.73 Mbit/s North Americae) OC1 51.84 Mbit/s Sonet fiberf) OC3 155.52 Mbit/s Sonet fiberg) OC96 4.976 Gbit/s Sonet fiberh) OC192 10 Gbit/s Sonet fiberi) OC768 40 Gbit/s Sonet fiber
![Page 24: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/24.jpg)
Network Devices
Layer 1 network devices: Repeaters, HubsLayer 2 network devices: Bridges, Switches, modems, NICsLayer 3 network devices: Repeaters, Hubs
![Page 25: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/25.jpg)
Repeaters: Layer 1
![Page 26: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/26.jpg)
Repeaters
A repeater solves the problem of too many nodes and not enough cable; cleans, amplifies, and resends a
signal that is weakened by long cable length.
![Page 27: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/27.jpg)
Hubs: Layer 1
![Page 28: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/28.jpg)
Hubs
• Regenerate and repeat signals
• Used as network concentration points
• Multiport repeater
• Becoming obsolete
![Page 29: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/29.jpg)
Hubs
![Page 30: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/30.jpg)
Bridges: Layer 2
![Page 31: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/31.jpg)
Bridges
Designed to create two or more LAN segments, each of which is a separate collision domain
Bridges filter traffic by looking at MAC
addresses.
![Page 32: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/32.jpg)
Switches: Layer 2
A Switch is a Multiport Bridge
![Page 33: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/33.jpg)
LAN Switches
Switches Combine the connectivity of a hub with the traffic regulation of a bridge on each port
![Page 34: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/34.jpg)
Core and Layer3 Switches
![Page 35: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/35.jpg)
NICs in the OSI Model
![Page 36: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/36.jpg)
Host Connectivity
a) When selecting a NIC, consider the following:
– Network architecture– Operating system– Media type– Data transfer speed– Available bus types
![Page 37: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/37.jpg)
NICs
a) Bus architectures
• ISA (Industry Standard Architecture)• EISA (Extended ISA)• PCI (Peripheral Component Interconnect)• MCA (Micro Channel Architecture)• PCMCIA (Personal Computer Memory Card
International Association)
![Page 38: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/38.jpg)
Routers and Serial Connectionsa) Routers are used to connect
LANs to WANs
b) Determine whether DTE or DCE connectors are required. The DTE is the endpoint of the user’s device on the WAN link.
c) The DCE is the point where responsibility for delivering data passes into the hands of the service provider.
d) When cabling routers for serial connectivity, the routers will either have fixed or modular ports.
![Page 39: Objectives: Chapter 2: Physical Layer Transmission media and cabling LAN Physical Layer Ethernet WAN Technologies Network Devices](https://reader033.vdocument.in/reader033/viewer/2022051214/56649e295503460f94b1700b/html5/thumbnails/39.jpg)
Routers and DSL Connections
a) The Cisco 827 ADSL router has one Asymmetric Digital Subscriber Line (ADSL) interface.
b) To connect an ADSL line to the ADSL port on a router, do the following:
1. Connect the phone cable to the ADSL port on the router.
2. Connect the other end of the phone cable to the phone jack.