oco biomedical sdi case
TRANSCRIPT
Patient had a thin ridge. Implants less than 3.0mm were indicated. Notice the facial undercut of the bone
O-Ball head and driving square are finally seated above the tissue which allows the denture to be seated above the tissue.
The doctor feels the lingual while the assistant feels the facial to ensure no perforations from the pilot drill
The o-ball heads are marked with the Thompson Stick to give a general location of the implant location in the denture. The transfer
marks on the denture indicate where to begin removing acrylic.
After the general location is marked, it is best to relieve the denture one cap at a time so that you get a good passive fit
The transfer mark indicates that the housing is rubbing the denture – need to remove more acrylic to ensure passive fit
No purple transfer marks. Now we have a passive fit. Denture is ready to reline for chair side pickup of housings
The denture is removed. Excess acrylic is removed and any voids are filled in with flowable composite..
Patient was given1,000 mg of Amoxicillin 1 hour before surgery. Peridex rinse was used one hour before surgery and three days post surgery.