off-season waste oil furnace specials - hotsy€¦ · insulation foam burner gasket assemble new...
TRANSCRIPT
WELCOME TO CLEAN.
trade-in specialIf you have a HOTSY less than 10 years old,
receive up to an extra 50 percent value when
you trade in and trade up!
EXPERTISE. SOLUTIONS. RESULTS.3100 101 St. • Urbandale, IA (515) 278-8800 • (800) 798-8800
1020 N. 15 Ave. • Hiawatha, IA (319) 378-8400 • (800) 555-1357
OFF-SEASON WASTE OIL FURNACE SPECIALS
For more information, or to order/schedule your summer special, contact us:
(800) 798-8800 Email: [email protected]
TWO-YEAR STANDARD SCHEDULED MAINTENANCE KITWhile waste oil provides an extremely inexpensive alternative source of heat in the cold months, the burning of this fuel requires a system finely tuned to turn liquid trash into free heat. To ensure the operation of your heater is consistent and dependable, the following list of critical components should be replaced every 3,000 hours of use:
Burner nozzle
Electrodes; left and right
Low oil temp control switch
High oil temp control switch
Air compressor filter
Secondary strainer o-ring
Copper tubing assembly
Low oil temperature control
Nozzle temperature control
Pre-heater o-rings
Insulation foam
Burner gasket assemble
NEW Two-Year Kit now includes 1 quart of Thermal Advantage (Waste oil tank treatment — treats up to 250 gallons)
Special price: $675.00*
CompletE burner rebuild Parts and labor to install burner rebuild kit in your
burner at our shop+
Complete cleaning of pre-heater, blower unit, burner cone and oil strainer
Cleaning, painting and full reconditioning of burner assembly
Reset all adjustments to factory settings and test firing
250 gallon waste oil tank fuel treatment
Special price: $675.00**Three pay terms available consisting of $235.00 a month.
+Removal/reinstallation of burner is available within regular service zones at prevailing rates.
premium furnace service Complete burner rebuild service
Return and reinstallation of burner to your location
Change oil and air filters
Removal and cleaning of foot valve and strainer from supply tank
Cleaning of the internal pump screen and foot valve strainer
Cleaning of the external surfaces of the furnace and burner tray
Inspection of oil pump and air compressor
Inspection of supply tank for contamination
Test and adjust burner settings
NEW complete combustion chamber inspection
NEW full combustion chamber cleaning included at no extra charge
Special price: $999.00**Three pay terms available consisting of $345.00 a month.
Act now!Prices valid through September 30, 2017
Brought to you by:
LARRY’S CORNER Parts Specials SUMMER 2017 SPECIALS
If you’ve ever called into Hotsy Cleaning Systems, chances are you’ve probably talked to Larry. Larry is the parts manager who has more than 25 years of experience and is happy to offer special deals on common parts and useful accessories!
18” Flex Wand
$25Reg. Price: $35.00
Spray Flex Wand
$100Reg. Price: $125.00
Push pull Lance $175Reg. Price: $205.00
Bi-level soft bristle brush
$65Reg. Price: $75.00Buy brush and receive free pole
Squeegee
$20Reg. Price: $30.00Buy squeegee and receive free pole
Stainless steel Wand holder
$55Reg. Price: $65.00
Stainless steel Brush holder
$28Reg. Price: $35.00
Stainless steel hose hook
$20Reg. Price: $25.00
Mat Clamps
$1750Reg. Price: $25.00
handheld waterbladesqueegee
$20Reg. Price: $30.00Buy squeegee and receive free pole
flat surface cleaner
$1,000Reg. Price: $1,250.00Buy squeegee and receive free pole
DETERGENTSLIMITED TIME OFFERFree bulk tank upgrade: For anyone ordering 55 gallon barrels
or more, Hotsy is offering a free bulk tank with all plumbing and
fittings needed to streamline your operation. This offer includes
a free tank setup (valued at $600), and allows you to get the best
available pricing on your detergents! Some restrictions apply.
Brush & Poles10% OFF
EXPERTISE. SOLUTIONS. RESULTS.
Water Jet is the Mercedes-Benz of the surface cleaning market. It handles easier, cleans faster and holds up better under the toughest conditions.