OIL TANKS & BRACKETS

8-2

paughco oil Tanks for sofTail® 3 quart, wrap-around oil tank, ‘86-99. Filler caps included.

oil Tank MounTing BrackeTs

o3750 Side fill, blackrepl. oeM 62498-84

o3062 Front ‘84-up Softail® repl. oeM 62707-84

o3061 Rear ‘84-up Softail® repl. oeM 62704-84

o3707 Rear tank mounting bracket for Softail® frames

oil Tank for kick sTarT sporTsTer3 quart, side fill oil tank. Battery plate is welded into place. Comes with filler cap, oil line fittings and battery support plate.o3613 Chrome oil tank

o3617 Side fill tankrepl. oeM 62498-84

o3740 Top center fill tank

chroMe oil Tanks for sofTail® 3 quart, wrap-around oil tank, ‘84-99. Filler caps included.

o3700 ‘84-99 Softail® Side fill tankrepl. oeM 62498-89a

o3706 ‘84-99 Softail® Top center fill tank

8-3

OIL TANKS

chroMe Tank for swingarM Models & BaTTery access3 1/2 quart side-fill oil tank designed for swingarm with easy access to the battery compartment. Bolts directly to stock mounts on frames and comes with filler plug and line fittings.o3616 ‘65-86 FL/FX & FXE

chroMe wrap-around TankThis Big Twin flatside wrap-around side-fill 4 qt. oil tank accepts stock FXE 12V battery & fits all electric start swingarms. Bolts in nicely & includes chrome filler cap. Squared edges. Does not fit FXR ’82-83.o3090 ‘65-83 FL, FX, FXE

chroMe oil Tank for rigid fraMeComes with filler cap.o3120 ‘36-57 Big Twin Side fill Oil Tank repl. o.e.M. 62504-38

chroMe oil Tank for sporTsTer®

This beautifully chromed tank is like the original style for late model Sportsters®.o3104 ‘83-93 XL repl. o.e.M. 62475-83

chroMe Tank for fXe BaTTery3.5 quart electric-start, side-fill wrap-around oil tank. Battery plate is welded into place. Comes with filler cap, oil line fittings and battery support plate.o3615 ‘58-64 Rigid or early swingarm frames with electric start also clears ‘79-up 4 speed transmissions

OIL pRESSuRE SwITChES & COvERS

8-4

oil Tank allen screw seTs f4710 ‘77-up XL Oil Fill & Clutch Adj. Allen Plugs Set with wrenchf6137 ‘81-up XL Oil Tank Drain

chroMe drain plugChrome plated cap nut. May also be used as a timing gear plug.o3618 Drain plug

o3619

o3610

ruBBer hose fiTTingsUniversal fittings for gas or oil tanks. Sold each.o3619 1/8” pipe, 1/4” hose o3610 1/8” pipe, 3/8” hose

MounTing kiTo3517 Oil gauge mounting kit.

accel® oil pressure swiTchesThese precision calibrated oil pressure switches cover models from 1941-up. They feature heavy duty contacts, brass pressure ferrules, thermoplastic insulators, and bright finish plated steel shells. Designed and tested to insure consistently accurate pressure thresholds. suggestion: oil pressure switches should be replaced with each engine overhaul or rebuild. e2340 ‘84-up 1340cc Evolution® 5 speed repl. oeM 26561-84e2320 ‘41-84 FL, FLHT, FLH-80, ‘80-83 FLT, FLHT, ‘82-83 FXR, FXRS, FXRT, ‘71-84 FX, FXE, FXS 1200, FXEF-80 FXS-80, FXB-80, FXWG-80 repl. oeM 26552-72e2330 ‘77-up XL series repl. oeM 26554-77

ness-Tech® oil pressure swiTch cover for Twin caM® 88Chrome plated billet. Retained with hidden set screw.o3233 Switch cover

8-5

OIL pRESSuRE GAuGES

oil pressure gaugesThese chromed high quality gauges have liquidfilled cases to absorb vibration. o3510 Universal 60# o3511 Universal 100# o3512 Universal V-Twin 60# o3513 Universal V-Twin 100#

accel® liquid-filled pressure gaugesThese liquid-filled pressure gauges are premium quality all the way. The top of the 1 ½” housing holds a pure glass lens that will not melt, distort or fade. The housing is stainless steel and the solid brass internals are bathed in vibration dampening glycerin. o3310 Oil pressure 60#o3312 Oil pressure 100#

ness-Tech® oil pressure gauge & BrackeT kiTFinally, a clean way to mount an oil pressure gauge on all EVO Big Twin motors. This design gives a great view of the gauge and adds style to your motor. The bracket & cone assembly is CNC machined aluminum and chrome plated. Includes stainless steel hose assembly.o3412 Oil pressure gauge & bracket kito3413 Replacement gauge onlyo3414 Mounting bracket without gauge

ness-Tech® oil pressure gauge & BrackeT asseMBlyFeatures stainless housing and glass lens, filled with vibration dampening glycerin for lasting performance. Billet bracket mounts oil pressure gauge to the rear rocker box. Complete kit includes Ness 0-60# gauge billet bracket &cone, stainless steel hose assembly &necessary mounting hardware. Chrome.o3415 EV2 Big Twino3416 Twin Cam 88®

oil TeMperaTure gauge kiTsFits 99-later FLHT, FLTR with fairing mounted gauges. Replaces ambient air temp gauge. 3 year warranty.o3417 ‘99-up FLHT/FLRT kit o3418 ‘01 Screamin’ Eagle R/Glide kit o3419 ‘02-up Screamin’ Eagle R/Glide kito3432 Replacement sending unit

o3417

o3418

o3419

OIL LINES & fITTINGS

8-6

russell pre-asseMBled oil line kiTsRussell Pro System Oil Hose kits are engineered to replace stock hoses and outdated clamps, Russell Pro System’s unique hose end design ensures a positive seal with the enhanced benefits and looks of stainless steel braided hose. Stainless Steel w/chrome fittings

russell pre-cuT engine oil line kiTsNot only will these kits add that custom show-bike appearance but they also give you the reliability of wire braided hoses to your oil system. All lines are pre-cut to OEM lengths for easy installation. Russell Tube Seal™ hose ends are used in these kits to attach lines to stock oil fittings. Kits are stainless steel with polished ends.

‘68-86 fl, fX & ‘84-86 softail®

o3424 Engine kit o3425 Engine kit, includes lines for oil coolero3426 Kit for oil cooler lines only o3427 Kit for oil filter lines only

‘87-91 5 speed fXsT, flsT softail®

o3428 Engine kito3426 Kit for oil cooler lines5-speed fXr Models ‘87-94o3429 Engine kito3431 Kit for oil cooler lines5-speed fXr Models ‘82-86o3430 Engine kito3431 Kit for oil cooler lines

oil line kiTs for sofTail®

o3830 L’92-99 o3820 ‘90-E92o3810 ‘87-89oil line kiTs for dyna & fXro3890 ‘92-98 All Dynao3850 ‘91-94 FXRo3840 ‘87-90 FXRoil line kiTs for Xl’s and Buell®

o3880 ‘94-up All XL’so3870 ‘92-93 All XL’so3860 ‘86-90 All XL’so3900 ‘94-98 Buell® S2o3910 ‘95-98 S1Buell® S1 Lightening

sTreeT-fleX™ hose By russellDesigned for use with Tube Seal™ hose ends. Available in traditional stainless steel.

B6610 1⁄4” X 3’B6454 1⁄4” X 6’ B6455 1⁄4” X 18’ B6620 5⁄16” X 3’ B6630 5⁄16” X 6’B6456 5⁄16” X 18’ B6640 3⁄8” X 3’ B6650 3⁄8” X 6’ B6660 3⁄8” X 18’

russell pro sysTeM 2000 oil line kiTEngineered specifically for the ‘00-up Softail®, the kit utilizes aerospace style connectors at the motor combined with smooth radius blends and pre-formed feed line for the ultimate in fit with an easy installation. Professionally finished in high luster chrome.o3811 Oil line kit comes with 3 lines per kit. Stainless steel clear coat.

OIL LINES & fITTINGS

8-7

TuBe seal™ hose endsTube Seal™ hose ends are primarily intended for gas and oil cooler lines. Tube Seals™ are machined from aircraft aluminum and are brightly anodized for professional show appearance. Maximum application pressure: 50 PSI. 6 packs. B6540 Polished, 1⁄4” for #4 hoseB6550 Polished, 5⁄16” for #6 hoseB6560 Polished, 3⁄8” for #8 hose

rocker feed line nipple By colonyAccurate reproduction of special threaded fitting used on rocker feed oil line 1936-1941 O.H.V., vent line 1937-1952 Harley® 45’s.o3103 Rocker feed line nipple

chroMe sTeel rocker oil linesThese steel oil line sets include crossover line and crank-case to rocker box line.o3508 ‘66-84 Shovelhead repl. oeM 62783-66a/62785-66ao3509 ‘57-85 Sportster® repl. oeM 17324-57a

paughco oil line BrackeTThis bracket bolts to the bottom of the oil tank base plate. It conveniently keeps your oil lines away from your exhaust system. Chromeo3612 Oil line bracket

oil line venT fiTTings By colonyThese oil line fittings are exact duplicates of the original type used on the 1936-1964 Big Twins. Use these with braided stainless steel or stock rigid steel oil lines.o3101 Cad Platedo3102 Chrome

set of 3

oil pressure linesDesigned to replace the plastic line from the oil pressure gauge to the motor, these high quality braided stainless steel lines are factory assembled. They include unique, 1 piece fittings for ease of installation. Finished in a high luster chrome to add the final detail to your ride. Stainless steel clear coat.o3106 ‘99-up Dyna, ‘00-up Softail® and ‘99-up FLHT/FLHR, Length 22”

venT lines for Twin caM®Russell Pro-System vent lines add that finishing touch to your motorcycle. Designed to replace that unsightly stock rubber hose from the motor to the transmission, this kit includes all necessary fittings and comes professionally finished in high luster chrome.o3105 2002 FLHR/FLT/FLH, Length 11-7/8” Stainless steel clear coat.

o3508

o3509

OIL TANK ACCESSORIES

8-8

sTainless sTeelMini claMpsThese stainless steel screw-on mini clamps are available in two sizes: 9/16” for 1/4”-5/16” hose and 11/16” for 3/8” hose. 10 packf2221 9/16” Screw-on mini clampf2222 11/16” Screw-on mini clamp

criMp hose claMpsOEM style hose clamps.Diameters listed reflect size before crimping. 50 pack.c2551 11/32” c2552 7/16”c2553 17/32”

color hose ends wiTh claMpsThese hose ends are made of polished aluminum and are available in chrome as well as red and blue anodized finish and in two different sizes. 6 pack.

c2554 19/32”c2555 11/16” c2556 13/16”

chroMe Triple hose separaTorAll stock Softail® models have three oil lines. Finally there’s a combination separator clamp that addresses this issue. Fits all ‘84-up Softails® with 3/8” oil lines. Big seller!c2470 Triple oil line separator

chroMe red Blue sizef2215 f2217 f2219 1/4”-5/16”f2216 f2218 f2220 3/8”

8-9

c2488 Radius Hose Separatorc2468 Grooved Hose Separator

chroMe ness-Tech® BilleT separaTorsDesigned to work with both 3/8” and 5/16” ID stainless steel hoses. The efficient and professional method of routing oil and fuel linesCNC machined from 6061-T6 billet aluminum. Sold in pairs

sTandard oil Tank MounTing sTudsRubber studs fit XL ‘67-up, FL ‘65-up & FX for mounting most battery & oil tanks sold each.o3140 Mounting studs repl. oeM 62563-65

heavy duTy ruBBer MounTsThese Heavy Duty mounts are much stronger than stock type mounts. They have an internally wound spring which is welded at each end to stud plates and heat sealed inside of the durable bonded rubber housing. These mounts will easily outlast any others available. Sold each.o3505 Rubber mounts repl. oeM 62563-65

oil Tank riMChrome oil tank edging.o3130 ‘65-86 4 speed Big Twins except FXST repl. oeM 62534-65

OIL TANK ACCESSORIES

OIL TANK ACCESSORIES

8-10

chroMe dipsTick coverNow you can instantly change the look of your dipstick for the better. These covers are easily installed with a special adhesive included. Fits side fill oil tanks ‘65-up.

MillenniuM chroMeoil dipsTick coversThese chrome billet covers install easilyover the stock dipstick.o3220 ‘65-up FL, FX and XL Smooth with side fill tankso3221 ‘65-up FL, FX and XL Ball Milled with side fill tankso3222 ‘93-up FLT & FLHR Smooth o3223 ‘93- up FLT & FLHR Ball Milled o3224 ‘92-up Dyna Models Smooth o3225 ‘92-up Dyna Models Ball Milled

chroMe push-pull oil Tank capThese chromed oil tank filler caps with push-pull rubber plugs fit all ‘65-up Harley® style and most custom oil tanks. See oil tanks page 8-2.o3503 Plug only repl. oeM 62544-84To3504 With dipstick repl. oeM 62625-70a

o3121 Smooth

o3704 Ball milled

BaTTery BoTToM plaTeo3010 ‘36-64 Big Twin repl. oeM 62575-36

chroMe oil Tank plugProvides a beautiful die cast cap without all the factory writing for a very clean look. Comes complete with cap and 2 ½” dipstick.o3502 84-up Softail® , 82-up Sportster®

8-11

OIL puMpS

crankcase oil passage drilling JigS&S’s crankcase oil passage drilling jig enables any builder to perform all the required and optional modifications necessary to install any S&S oil pump kit.T0100 Crankcase Oil Passage Drilling Jig

e0180 ‘92-99 Big Twins repl. oeM 26190-73, 26349-73a, 25313-77B & 26345-73e0170 ‘77-91 Big Twins one drilling step required on ‘77-80 engines. repl.oeM 26190-73, 26349-73a, 25313-77B, 26345-73e0160 ‘73-77 Big Twins one drilling step required on ‘73-77 engines. repl oeM 26190-73, 26345-73, 25313-73

coMpleTe oil puMp kiTs By s&sThese kits include the oil pump assembly listed below plus the

pinion shaft drive gear, the drive shaft drive gear, the breather gear and breather shim kit.

replaceMenT gaskeTse0190 ‘36-91 Oil pump gasketse0200 ‘92-99 Oil pump gaskets

Starwest, Inc. & Win Products Continuing the tradition of quality products & accessories

our customers have counted on throughout the years.

OIL puMpS

8-12

Jims® fully c.n.c. Machine polished Billet oil pumpsThis Flow Pro 1 will give an increase in oil return scavenge volume over stock pumps. Features: Increase horsepower by decreasing drag on the fly-wheels and other rotating parts. All stock and aftermarket outer oil pump covers will work with this oil pump. Polished Billet 6061-T651 aluminum, C.N.C. machined to exact tolerance for the most durable, strong and wear resistant oil pumps. Matched feed and return gears individually matched to each body. Available for late ‘73-up Big Twins, use on 74” to 140” motors. ‘81-up bolts on with no modification.Note: ‘73-80 cases will require a simple drilling for oil drain hole by using our tool E1531.e1526 ‘92-up Big Twin Oil pump body e1525 ‘73-91 Big Twin Oil pump body

polished BilleT oil puMp coverDesigned with the late oil pressure relief to return excess oil to feed side of oil pump. For use on all aluminum oil pump bodies.noTe: No provision in the cover for front or rear chain oiling.e1527 ‘73-91 Big Twin for JIMS® billet oil pump bodiese1528 ‘92-up Big Twin for JIMS® billet oil pump bodies

polished BilleT oil puMp coverThis cover was designed for models not having oil tank under transmission. Designed with the late oil pressure relief to return excess oil to feed side of oil pump. For use on all aluminum oil pump bodies. No provision in the cover for front or rear chain oiling.e1529 ‘73-91 Big Twin for JIMS® billet oil pump bodiese1530 ‘92-up Big Twin for JIMS® billet oil pump bodies

chroMe oeM sTyle oil puMp asseMBly Oil pump comes complete with checkball and relief springs, drive gears, gaskets, keys and all necessary fittings. Chrome mounting hardware is included. When installing these pumps on pre-’81 models, crankcase oil passage drilling jig must be used.e1532 ‘92-up e1533 ‘73-91

oil puMp drill Jig Tool By JiMs®

This crankcase oil passage jig allows you to modify ‘73-80 Big Twin crankcases to accept later ‘81-91 style oil pumps. This includes Jims® oil pumps, stock H-D® and other aftermarket oil pumps ‘81-91.e1531 Oil pump drill jig

e1532 e1533

8-13

OIL puMp COvERS

oil puMp cover By küryakynNo stamped, thin metal here. This chrome, die-cast cover really looks like it belongs on your motor.o3232 ’92-up Softail® & FXR

chroMe oil puMp coverso3241 ‘68-91 Big Twin with oiler screwo3242 ‘68-91 Big Twin without oiler screwo3244 ‘92-up Big Twin

chroMe classic oil puMp coverChrome with black eagle design on side.o3243 ‘87-up FL’s

OIL puMp COvERS & pLuGS

8-14

chroMe oil puMp coverFits all Softail® models from ‘89-up. Available in plain or louvered styles. All mounting hardware included.T4762 LouveredT4761 Plain

oil puMp plugs

TappeT oil screen, check valve &relief valve plug seTsf6298 ‘81-up Big Twins set of 3f6297 ‘70-80 Big Twins set of 3

TappeT oil screen plug sold eachf6294 ‘81-up Big Twins repl. oeM 26263-80f6292 ‘70-80 Big Twins repl. oeM 657f6296 ‘66-69 Big Twins repl. oeM 655f6295 ‘52-65 Big Twins repl. oeM 24987-52

check valve plug sold eachf6294 ‘81-up Big Twins repl. oeM 26263-80f6293 ‘36-80 Big Twins repl. oeM 26362-36

relief valve plug sold eachf6294 ‘81-up Big Twins repl. oeM 26263-80f6291 ‘68-80 Big Twins repl. oeM 26377-68f6168 Oil Tank & Transmission Drain Nylon Washer, ½” by Gardner Westcott repl. oeM 6007

f6298

oil puMp cover By küryakynAdd a show chrome plated cover to your oil pump! This steel cover mounts on the stock oil pump mounting bolt on ‘68-91 Big Twins. Made in the U.S.A.o3230 ‘80-91 Big Twin without front chain oilero3240 ‘68-E84 Big Twin with front chain oiler

8-15

OIL puMp ACCESSORIES

oil puMp drive gearo3170 ‘54-72 Big Twin with key repl. 26349-54o3180 ‘73-up FL, FLH, FX with key repl. oeM 26349-73 o3200 ‘73-85 Big Twin with key 24T repl. oeM 26345-73.

oil puMp gears froM JiMs®

These gears fit ‘68-up Big Twin oil pumps and some aftermarket pumps.o3800 Return drive gear repl. oeM 26315-68ao3801 Return idler gear repl. oeM 26317-68ao3802 Feed idler gear repl. oeM 26326-62ao3803 Feed drive gear repl. oeM 26328-74

oil puMp Bushings By JiMs®

Made in America by JIMS®.e1487 ‘77-90 Sportster® repl. oeM 26431-76e1488 ‘75-90 Sportster® repl. oeM 26489-75

oil puMp drive shafTse1485 ‘36-67 Big Twins, American made by JIMS®

repl. oeM 26346-36e1486 ‘68-up Big Twin, American made by JIMS®

repl. oeM 26346-69/70o3210 Oil pump drive shaft fits FL, FLH, FLH-80 FX all models ‘70-up, Imported repl. oeM’s 26346-70 & 26346-68

OIL puMp ACCESSORIES

8-16

oil puMp relief valve springCrane’s premium quality, steel alloy, heat set oil pump pressure relief spring actually increases engine oil pressure by 2-3 psi, and does not interfere with critical bearing lubrication needs.e6380 ‘36-up Big Twins & EVO

chroMe allen screw oil puMp MounT seTsAll high quality polished chrome. All you need to complete the job with American made style.

Big Twinsf6185 ‘92-upf6186 ‘79-91f6187 ‘68-78

sporTsTer®

f6188 ‘91-upf6189 ‘77-90 f6190 ‘71-76

MounTing hardware-acorn sTyleChrome f6304 ‘78-up Big Twin f6303 ‘68-77 Big Twin

oil puMp reTaining ring10 Pack e6524 ‘36-up Big Twin repl. oeM 26348-36e6523 ‘70-up Big Twin ‘56-up XL repl. oeM 11002

e6524 e6523

super puMp spring kiTKit consists of 3 separate color-coded springs. Each spring supplies more pressure on the relief valve plunger controlling the output pressure of the pump as follows: Initial start-up: 44 psi Normal operating speed & temp.: 30 psi At idle: No less than 10 psi average 10-18 psio3420 ‘66-up Big Twins

8-17

OIL fILTERS, COOLERS KITS & ACCESSORIES

spin-on oil filTer kiTsChrome oil filter, steel bracket, hosesand clamps. Mounts on top of engine front motor mount.o3507 ‘36-78 Big Twins

perf-forM® spin-on oil filTer cooler kiTPerf-Form’s filter cooler combination mounts directly to any ¾” x 16” thread spin-on filter mount. It provides oil cooling with fast, economical filter changes. Comes complete with chrome plated finned aluminum canister housing, stainless steel mount plate, seals, 3 replacement filter cartridges and a 5 socket filter wrench.o3044 Filter cartridge for canister & cooler

filTer eleMenTsFits ‘53-E82 Big Twins ‘54-78 XL drop-in o3301 Accel repl. oeM 63839-53o3033 Fram repl. oeM 63840-53

early oil filTerEarly style chrome tank oil filter.o3260 ‘40-84 Big Twins except FXR & FLT repl. oeM 63800-48

filTer MounTing BrackeTso3270 ‘40-57 rigid frame repl. oeM 63860-50o3280 ‘58-64 swingarm frame. repl. oeM 63860-58ao3290 ‘65-86 4-speed Big Twins except FXST

OIL fILTERS

8-18

perf-forM® eXTra long spin-onAvailable in black for all ‘91-up Dynas it is a full 5.53”.o3042 Extra long spin-on

perf-forM® eXTended spin-on oil filTersPerf-Form spin-on is 3/4” over stock and fits all rubber mounts & Softail® models, ‘91-up Dyna®, ‘84-up XL. Will not work on fuel injected models.o3040 Chrome finish o3041 Black finish repl. oeM’s 63806-83 & 63805-80 & 63812-90.

perf-forM® spin-onPerf-Form stock size spin-on.o3030 ‘80-E84 XL & ‘82-86 4 speed Big Twins repl. oeM 63782-80 & 63810-80

fraM MoTorcycle oil filTersBlack spin-on.o3035 ‘84-up Big Twin & ‘86-up XL repl. oeM 63805-80

k&n perforMance gold oil filTerK&N filters are compatible with all the latest synthetic engine oils and are unaffected by racing fuels. Other features include a new silicon rubber anti-drain back valve, an improved pressure relief, a strong inner core and a heavy duty base plate with improved rolled seal.o3031 ‘84-01 XL, ‘84-98 FXST 5 speed models EVO except Dyna ‘80-98. Chrome finish repl. oeM 63796-77, 63805-80a, 63805-80o3036 Long oil filter for EVO Big Twin black finisho3032 Twin Cam Long oil fliter chrome finish repl. oeM 63798-99o3037 Long oil filter for Twin Cam black finisho3034 ‘91-98 FXD Extra long oil fliter chrome finish repl. oeM 63813-90

OIL fILTERS

8-19

laTe sTyle eXTra long spin-on Chrome o3506 ‘84-up XL, ‘91-up Dyna Glide® ‘92-up Big Twins repl. oeM 63813-90

perf-forM® drop-in oil filTerPerf-Form oil filters feature absolute micron ratings in the 28-35 micron range with nominal ratings of 10-22 microns with 4 micron retention efficiencies of up to 20% per pass through the filter.o3050 ‘53-83 models with in-tank filters repl. oeM 63840-53

oil filTer eleMenTo3020 ‘53-83 models with in-tank filters. repl. oeM 63840-53

perf-forM® oil filTers and coolers

o3321 All Harley-Davidsons® with forward mount Spin- On oil filters including all Twin-Cam 88B® models.

chroMe spin-on oil filTer o3501 ‘84-01 XL, ‘84-98 FXST 5 speed models EVO except Dyna ‘80-98 repl. oeM 63796-77a

OIL fILTER AdApTERS, COvERS & OIL

8-20

oil filTer housing coverAdds new life to stock aluminum oil filter housings. Alsocomes with a chrome cover for the frame boss where the housing is mounted. All chrome hardware is included.o3540 ‘87-91 Softail®

f. pJ-1 MoTor oilCooler running for reduced engine wear and provides smoother shifting to extend clutch and transmission life.c1023 10W40 Synthetic 1 Literc1021 6/case Syntheticc1024 20W50 Synthetic 1 Literc1022 6/case Syntheticc1041 20W50 1 Literc1042 6/case

ness-Tech® oil filTer MounTSleek design compliments your motor, accept stock filter, replaces stock cast piece on ‘92-up Big Twin chrome plated.03697 Grooved

chroMe oil filTer BrackeT for Twin caM 88a®This highly polished triple chrome plated bracket, looks great against a blacked-out engine. It’s made from the same factory aluminum die casting to ensure proper fitment. Includes chrome mounting hardware and new seals.o3538 Fits Twin Cam 88A® engines only. Does not fit 88B oeM 26321-99