001101926

compact, lightweight and “no-tool” poweR Unit

NEW MULTIFUNCTION BRUSHCUTTERNEW MULTIFUNCTION BRUSHCUTTER

It’s an Emak S.p.A. trademark 42011 Bagnolo in Piano (RE) ItalyTel. +39 0522 956611 • Fax +39 0522 951555info@myoleomac.com • www.myoleomac.com

www.youtube.com/MyOleoMac

› 21.7 cm³ 1.2 HP (0.9 kW) 2-stroke engine: featuring generous torque output with a linear power curve even at low revs.

› Piston with 2 rings, diecast cylinder with nickel plating, forged con rod and crankshaft: guarantee of ruggedness and durability.

› Digital coil with electronic control and revs limiter: for easier starting, enhanced performance thanks to uniform combustion, and reduced fuel consumption.

› Innovative 110 mm dia. Load&Go head with 2.4 mm dia. line: for straightforward and fast line replacement, just 20 seconds to rewind the line and resume work.

› Machine equipped with “no tools” quick fit system: a device designed to enable installation of 4 different applications without the use of tools.

› 24 mm diameter aluminium drive tube with self-lubricating bearings to ensure smooth movement of the shaft for greater operator comfort. Aluminium bevel drive with M10 pivot designed to transfer the engine power to the cutting tool in an optimal manner.

› On/off switch: returns automatically to the “on” position after each stop (always on).

› Filter support with carburettor anti-backflow element (Emak patent): prevents the filter from becoming fouled by fuel and guarantees longer operation between filter maintenance operations.

› “Easy on” device: composed of a double spring in the starter cover combined with driver with two ratchets means reduced force with each pull and fast starting with fewer rope pulls.

21.7 cm³ 1.2 HP (0.9 kW) 2-stroke engine: featuring generous torque outPut WitH a linear PoWer curve even at loW revs. ecologically advanced (euro 2), loW noise, ligHtWeigHt and WitH minimal fuel consumPtion.

peRFoRmance

eaSe oF USetHe “easy on” device assures reduced roPe Pulling force and fast starting WitH feWer roPe Pulls. tHe no-tools quick attacHment system makes it Possible to sWitcH betWeen aPPlications raPidly and WitH just a feW actions, WHile also reducing sPace requirements for transPortation and storage.

VeRSatilecomPact, ligHtWeigHt and loW noise engine able to PoWer different aPPlications (Pruner, bloWer and Hedgetrimmer). fitting tHe 0.75 metre extension sHaft makes it Possible to increase tHe lengtH of tHe drive tube in order to reacH taller Hedges and brancHes (recommended for tHe Pruner and Hedgetrimmer aPPlications).

eRgonomicStHe comPact dimensions of tHe engine unit and balanced WeigHt distribution of tHe tool assure a good level of manoeuvrability and control in all Working conditions and in all aPPlications.

BC 240 DBC 240 D

bRUShcUtteR Practical and manoeuvrable thanks to an optimal ratio between weight and balance; 12 adjustment positions make it possible to change the angle of the blades to adapt them to match your needs. The 0.9 metre shaft enables the operator to trim hedges up to 3 metres high.

hedgetRimmeRVersatile application that makes it possible to prune branches and bushes of all types of up to 3 metres in height, ensuring healthy growth and vegetation. The pruner can be adjusted through 5 intermediate positions from 0° a 90° to allow a better view of the cutting area.

pRUneRAfter cutting the grass, trimming the hedge and pruning the trees, the no tools quick fit system makes it possible to install the blower application: the ideal tool to remove leaves, bush and debris from the garden.

bloweR

Fitting the 0.75 metre shaft makes it possible to increase the length of the drive tube in order to reach taller hedges and branches. Recommended for pruner and hedgetrimmer application. Weight: 0.7 Kg - Length: 750 mm

ShaFt extenSion

acceSSoRY Recommended FoR poweR

pRUneR and hedgetRimmeR applicationS

NEW MULTIFUNCTION BRUSHCUTTER

The new BC 240 D brushcutter is designed to meet the needs of DIY users for private gardens and professionals responsible for maintenance of green spaces around condominiums, residential complexes and resorts. Both user groups can benefit enormously from a multipurpose tool that can be quickly set up as a brushcutter, hedgetrimmer, pruner or leaf blower.

The same compact and light weight engine unit together with a no-tools coupling system for mounting the various attachments, makes this tool easy to use in all seasons: cutting the grass and trimming hedges in spring or pruning duties and leaf blowing during the autumn months.

Each application – with the exception of the brushcutter, which is supplied as standard with the engine unit – is managed separately and can be purchased after purchasing the basic tool as the need arises. Users can also order an extension that increases the length of the drive tube to allow the tool to reach higher hedges or loftier branches: this makes it possible to dispense with the need for impractical ladders or access platforms.

Using just one motor for all applications means simplified maintenance and refueling of just one tank, while simultaneously reducing the space required for transport or winter storage. Blade length 500 mm

Blades adjustable through 12 positions from 0 to 180°Blade pitch 35 mmWeight of application/complete tool 2.5 Kg / 6.5 Kg

Weight of complete machine 2000 mmBar length 25 cm/10”Chain (pitch x gauge) 3/8” x .043”Oil tank capacity 0.18 LWeight of application/complete tool 2.0 Kg / 6.0 Kg

Air flow rate 600 m³/hAir velocity 60 m/sWeight of application/complete tool 1.5 Kg / 5.5 Kg

Power/Displacement 1.2 HP - 0.9 kW / 21.7 cm³

Shaft arm diameter 24 mm

Handle single

Cutting components 110 mm dia. Load&Go line head with 2.40 mm dia. line 255 mm dia. disc with 3 blades

Clutch 54 mm

Fuel tank capacity 0.40 L

Weight 5.1 Kg

BC 240 D

bRUShcUtteR Practical and manoeuvrable thanks to an optimal ratio between weight and balance; 12 adjustment positions make it possible to change the angle of the blades to adapt them to match your needs. The 0.9 metre shaft enables the operator to trim hedges up to 3 metres high.

hedgetRimmeRVersatile application that makes it possible to prune branches and bushes of all types of up to 3 metres in height, ensuring healthy growth and vegetation. The pruner can be adjusted through 5 intermediate positions from 0° a 90° to allow a better view of the cutting area.

pRUneRAfter cutting the grass, trimming the hedge and pruning the trees, the no tools quick fit system makes it possible to install the blower application: the ideal tool to remove leaves, bush and debris from the garden.

bloweR

Fitting the 0.75 metre shaft makes it possible to increase the length of the drive tube in order to reach taller hedges and branches. Recommended for pruner and hedgetrimmer application. Weight: 0.7 Kg - Length: 750 mm

ShaFt extenSion

acceSSoRY Recommended FoR poweR

pRUneR and hedgetRimmeR applicationS

NEW MULTIFUNCTION BRUSHCUTTER

The new BC 240 D brushcutter is designed to meet the needs of DIY users for private gardens and professionals responsible for maintenance of green spaces around condominiums, residential complexes and resorts. Both user groups can benefit enormously from a multipurpose tool that can be quickly set up as a brushcutter, hedgetrimmer, pruner or leaf blower.

The same compact and light weight engine unit together with a no-tools coupling system for mounting the various attachments, makes this tool easy to use in all seasons: cutting the grass and trimming hedges in spring or pruning duties and leaf blowing during the autumn months.

Each application – with the exception of the brushcutter, which is supplied as standard with the engine unit – is managed separately and can be purchased after purchasing the basic tool as the need arises. Users can also order an extension that increases the length of the drive tube to allow the tool to reach higher hedges or loftier branches: this makes it possible to dispense with the need for impractical ladders or access platforms.

Using just one motor for all applications means simplified maintenance and refueling of just one tank, while simultaneously reducing the space required for transport or winter storage. Blade length 500 mm

Blades adjustable through 12 positions from 0 to 180°Blade pitch 35 mmWeight of application/complete tool 2.5 Kg / 6.5 Kg

Weight of complete machine 2000 mmBar length 25 cm/10”Chain (pitch x gauge) 3/8” x .043”Oil tank capacity 0.18 LWeight of application/complete tool 2.0 Kg / 6.0 Kg

Air flow rate 600 m³/hAir velocity 60 m/sWeight of application/complete tool 1.5 Kg / 5.5 Kg

Power/Displacement 1.2 HP - 0.9 kW / 21.7 cm³

Shaft arm diameter 24 mm

Handle single

Cutting components 110 mm dia. Load&Go line head with 2.40 mm dia. line 255 mm dia. disc with 3 blades

Clutch 54 mm

Fuel tank capacity 0.40 L

Weight 5.1 Kg

BC 240 D

bRUShcUtteR Practical and manoeuvrable thanks to an optimal ratio between weight and balance; 12 adjustment positions make it possible to change the angle of the blades to adapt them to match your needs. The 0.9 metre shaft enables the operator to trim hedges up to 3 metres high.

hedgetRimmeRVersatile application that makes it possible to prune branches and bushes of all types of up to 3 metres in height, ensuring healthy growth and vegetation. The pruner can be adjusted through 5 intermediate positions from 0° a 90° to allow a better view of the cutting area.

pRUneRAfter cutting the grass, trimming the hedge and pruning the trees, the no tools quick fit system makes it possible to install the blower application: the ideal tool to remove leaves, bush and debris from the garden.

bloweR

Fitting the 0.75 metre shaft makes it possible to increase the length of the drive tube in order to reach taller hedges and branches. Recommended for pruner and hedgetrimmer application. Weight: 0.7 Kg - Length: 750 mm

ShaFt extenSion

acceSSoRY Recommended FoR poweR

pRUneR and hedgetRimmeR applicationS

NEW MULTIFUNCTION BRUSHCUTTER

The new BC 240 D brushcutter is designed to meet the needs of DIY users for private gardens and professionals responsible for maintenance of green spaces around condominiums, residential complexes and resorts. Both user groups can benefit enormously from a multipurpose tool that can be quickly set up as a brushcutter, hedgetrimmer, pruner or leaf blower.

The same compact and light weight engine unit together with a no-tools coupling system for mounting the various attachments, makes this tool easy to use in all seasons: cutting the grass and trimming hedges in spring or pruning duties and leaf blowing during the autumn months.

Each application – with the exception of the brushcutter, which is supplied as standard with the engine unit – is managed separately and can be purchased after purchasing the basic tool as the need arises. Users can also order an extension that increases the length of the drive tube to allow the tool to reach higher hedges or loftier branches: this makes it possible to dispense with the need for impractical ladders or access platforms.

Using just one motor for all applications means simplified maintenance and refueling of just one tank, while simultaneously reducing the space required for transport or winter storage. Blade length 500 mm

Blades adjustable through 12 positions from 0 to 180°Blade pitch 35 mmWeight of application/complete tool 2.5 Kg / 6.5 Kg

Weight of complete machine 2000 mmBar length 25 cm/10”Chain (pitch x gauge) 3/8” x .043”Oil tank capacity 0.18 LWeight of application/complete tool 2.0 Kg / 6.0 Kg

Air flow rate 600 m³/hAir velocity 60 m/sWeight of application/complete tool 1.5 Kg / 5.5 Kg

Power/Displacement 1.2 HP - 0.9 kW / 21.7 cm³

Shaft arm diameter 24 mm

Handle single

Cutting components 110 mm dia. Load&Go line head with 2.40 mm dia. line 255 mm dia. disc with 3 blades

Clutch 54 mm

Fuel tank capacity 0.40 L

Weight 5.1 Kg

BC 240 D

001101926

compact, lightweight and “no-tool” poweR Unit

NEW MULTIFUNCTION BRUSHCUTTERNEW MULTIFUNCTION BRUSHCUTTER

It’s an Emak S.p.A. trademark 42011 Bagnolo in Piano (RE) ItalyTel. +39 0522 956611 • Fax +39 0522 951555info@myoleomac.com • www.myoleomac.com

www.youtube.com/MyOleoMac

› 21.7 cm³ 1.2 HP (0.9 kW) 2-stroke engine: featuring generous torque output with a linear power curve even at low revs.

› Piston with 2 rings, diecast cylinder with nickel plating, forged con rod and crankshaft: guarantee of ruggedness and durability.

› Digital coil with electronic control and revs limiter: for easier starting, enhanced performance thanks to uniform combustion, and reduced fuel consumption.

› Innovative 110 mm dia. Load&Go head with 2.4 mm dia. line: for straightforward and fast line replacement, just 20 seconds to rewind the line and resume work.

› Machine equipped with “no tools” quick fit system: a device designed to enable installation of 4 different applications without the use of tools.

› 24 mm diameter aluminium drive tube with self-lubricating bearings to ensure smooth movement of the shaft for greater operator comfort. Aluminium bevel drive with M10 pivot designed to transfer the engine power to the cutting tool in an optimal manner.

› On/off switch: returns automatically to the “on” position after each stop (always on).

› Filter support with carburettor anti-backflow element (Emak patent): prevents the filter from becoming fouled by fuel and guarantees longer operation between filter maintenance operations.

› “Easy on” device: composed of a double spring in the starter cover combined with driver with two ratchets means reduced force with each pull and fast starting with fewer rope pulls.

21.7 cm³ 1.2 HP (0.9 kW) 2-stroke engine: featuring generous torque outPut WitH a linear PoWer curve even at loW revs. ecologically advanced (euro 2), loW noise, ligHtWeigHt and WitH minimal fuel consumPtion.

peRFoRmance

eaSe oF USetHe “easy on” device assures reduced roPe Pulling force and fast starting WitH feWer roPe Pulls. tHe no-tools quick attacHment system makes it Possible to sWitcH betWeen aPPlications raPidly and WitH just a feW actions, WHile also reducing sPace requirements for transPortation and storage.

VeRSatilecomPact, ligHtWeigHt and loW noise engine able to PoWer different aPPlications (Pruner, bloWer and Hedgetrimmer). fitting tHe 0.75 metre extension sHaft makes it Possible to increase tHe lengtH of tHe drive tube in order to reacH taller Hedges and brancHes (recommended for tHe Pruner and Hedgetrimmer aPPlications).

eRgonomicStHe comPact dimensions of tHe engine unit and balanced WeigHt distribution of tHe tool assure a good level of manoeuvrability and control in all Working conditions and in all aPPlications.

BC 240 DBC 240 D

001101926

compact, lightweight and “no-tool” poweR Unit

NEW MULTIFUNCTION BRUSHCUTTERNEW MULTIFUNCTION BRUSHCUTTER

It’s an Emak S.p.A. trademark 42011 Bagnolo in Piano (RE) ItalyTel. +39 0522 956611 • Fax +39 0522 951555info@myoleomac.com • www.myoleomac.com

www.youtube.com/MyOleoMac

› 21.7 cm³ 1.2 HP (0.9 kW) 2-stroke engine: featuring generous torque output with a linear power curve even at low revs.

› Piston with 2 rings, diecast cylinder with nickel plating, forged con rod and crankshaft: guarantee of ruggedness and durability.

› Digital coil with electronic control and revs limiter: for easier starting, enhanced performance thanks to uniform combustion, and reduced fuel consumption.

› Innovative 110 mm dia. Load&Go head with 2.4 mm dia. line: for straightforward and fast line replacement, just 20 seconds to rewind the line and resume work.

› Machine equipped with “no tools” quick fit system: a device designed to enable installation of 4 different applications without the use of tools.

› 24 mm diameter aluminium drive tube with self-lubricating bearings to ensure smooth movement of the shaft for greater operator comfort. Aluminium bevel drive with M10 pivot designed to transfer the engine power to the cutting tool in an optimal manner.

› On/off switch: returns automatically to the “on” position after each stop (always on).

› Filter support with carburettor anti-backflow element (Emak patent): prevents the filter from becoming fouled by fuel and guarantees longer operation between filter maintenance operations.

› “Easy on” device: composed of a double spring in the starter cover combined with driver with two ratchets means reduced force with each pull and fast starting with fewer rope pulls.

21.7 cm³ 1.2 HP (0.9 kW) 2-stroke engine: featuring generous torque outPut WitH a linear PoWer curve even at loW revs. ecologically advanced (euro 2), loW noise, ligHtWeigHt and WitH minimal fuel consumPtion.

peRFoRmance

eaSe oF USetHe “easy on” device assures reduced roPe Pulling force and fast starting WitH feWer roPe Pulls. tHe no-tools quick attacHment system makes it Possible to sWitcH betWeen aPPlications raPidly and WitH just a feW actions, WHile also reducing sPace requirements for transPortation and storage.

VeRSatilecomPact, ligHtWeigHt and loW noise engine able to PoWer different aPPlications (Pruner, bloWer and Hedgetrimmer). fitting tHe 0.75 metre extension sHaft makes it Possible to increase tHe lengtH of tHe drive tube in order to reacH taller Hedges and brancHes (recommended for tHe Pruner and Hedgetrimmer aPPlications).

eRgonomicStHe comPact dimensions of tHe engine unit and balanced WeigHt distribution of tHe tool assure a good level of manoeuvrability and control in all Working conditions and in all aPPlications.

BC 240 DBC 240 D