OmniPressureTM Hyperbaric Chamber MattressA New Standard in Patient comfort and Pressure Distribution

T h e W o r l d L e a d e r i n H y p e r b a r i c T e c h n o l o g y & M e d i c i n e

• Supports clinical wound-prevention goals• Fluid-resistant conductive, anti-microbial and non-irritant top cover• Significantly improved patient comfort• Gentle slope reduces pressure on lower legs and protects heels• Fits all current hyperbaric chamber models and brands • Optimum pressure distribution through unique two-layer multi-density design

Stork Twin City Testing Corporation Materials Technology

SECHRIST INDUSTRIES

4225 East LaPalma Ave.

Anaheim, CA. 92807

Attn: Mr. Depak Talati

Project Number: 30161 08-98819.3

Date: 09/16/08

Sample Size: Aprox. 78-1/2” x 23-1/2” x 3” Sample ID: 3 Page: 10 of 15

F:\Product\Mattress Testing Reports\Sechrist\08-98819\08-98819.3 Sechrist Sample 3 Xsensor Report.doc

Information and statements in this report are derived from material, information and/or specifications furnished by the client and exclude any expressed or implied warranties as to the fitness of the

material tested or analyzed for any particular purpose or use. This report is the confidential property of our client and may not be used for advertising purposes. This report shall not be reproduced

except in full, without written approval of this laboratory. The recording of false, fictitious or fraudulent statements or entries on this document may be punished as a felony under Federal Statutes

including Federal Law Title 18, Chapter 47. Stork Twin City Testing is an operating unit of Stork Materials Technology B.V., Amsterdam, The Netherlands, which is a member of the Stork group

Material Testing · Non-Destructive Testing

Product Evaluation · Construction Materials 662 Cromwell Avenue

St. Paul, MN 55114 USATelephone: (651) 645-3601 Telefax: (651) 659-7348 Website: www.storktct.com

0-100 mm/hg scale (pages 10-15)

Subject 1

Stork Twin City Testing Corporation Materials Technology

SECHRIST INDUSTRIES

4225 East LaPalma Ave.

Anaheim, CA. 92807

Attn: Mr. Depak Talati

Project Number: 30161 08-98819.1

Date: 09/12/08

Sample Size: Aprox. 78-1/2” x 23-1/2” x 2-1/2” Sample ID: 1 Page: 10 of 15

F:\Product\Mattress Testing Reports\Sechrist\08-98819\08-98819.1 Sechrist Sample 1 Xsensor Report.doc

Information and statements in this report are derived from material, information and/or specifications furnished by the client and exclude any expressed or implied warranties as to the fitness of the

material tested or analyzed for any particular purpose or use. This report is the confidential property of our client and may not be used for advertising purposes. This report shall not be reproduced

except in full, without written approval of this laboratory. The recording of false, fictitious or fraudulent statements or entries on this document may be punished as a felony under Federal Statutes

including Federal Law Title 18, Chapter 47. Stork Twin City Testing is an operating unit of Stork Materials Technology B.V., Amsterdam, The Netherlands, which is a member of the Stork group

Material Testing · Non-Destructive Testing

Product Evaluation · Construction Materials 662 Cromwell Avenue

St. Paul, MN 55114 USATelephone: (651) 645-3601 Telefax: (651) 659-7348 Website: www.storktct.com

0-100 mm/hg scale (pages 10-15)

Subject 1

The Sechrist OmniPressure Hyperbaric Mattress provides even pressure distribution for all patients. The OmniPressure shows a 40%+ improvement in heel pressure and up to 30% improvement in the

sacral region as compared to existing competitive hyperbaric mattresses(based on 165 lb., 240 lb., and 385 lb. patients).

OmniPressure Hyperbaric Mattress Other Hyperbaric Mattresses

• Immersion layer with highly supportive and resilient underlayer which provides optimum pressure distribution• Conductive, tear-resistant vinyl bottom cover — provides durable and slip-resistant surface• Meets standards — NFPA 99, CAL 117, 133 and 603; 16 CFR Part 1633• Standard mattress supports all hyperbaric patients; bariatric model available for patients from 400 to 700 lbs• Up to 25% increase in surface support area compared to existing hyperbaric mattress

OmniPressureTM Hyperbaric Chamber MattressA New Standard in Patient comfort and Pressure Distribution

S e c h r i s t I n d u s t r i e s , I n c . • 4 2 2 5 E . L a P a l m a A v e . • A n a h e i m , C A 9 2 8 0 7 • 8 0 0 . S E C H R I S T ( 7 3 2 . 4 7 4 7 )

P / N 1 0 0 4 2 1 R e v 1

P/N 20506 Mattress, OmniPressure, narrow (for chamber models 2500, 2800)

P/N 20505 Mattress, OmniPressure, wide (for chamber models 3200, 3300E, 3600E, 3300H, 3600H and 4100H)

P/N 20509 Mattress, Bariatric OmniPressure (for chamber models 3200, 3300E, 3600E, 3300H, 3600H and 4100H)

Supporting Wound-Prevention Goals

Designed to support healthcare professionals in their wound-prevention goals, the Sechrist OmniPressure Hyperbaric Chamber Mattress distributes pressure across the patient’s body for optimum comfort. A unique two-layer, multi-density design provides a combination of support and conformation, while a gentle taper at the foot of the mattress redistributes pressure along the lower legs and reduces stress on the patient’s heels, a problematic area for those with compromised wounds.

The OmniPressure Hyperbaric Mattress fits all current brands and models of hyperbaric chambers and is designed for safety, flexibility and optimum infection control. The fabric cover top is both fluid-resistant and flame retardant. Specifically designed for use in a hyperbaric chamber, the cover is conductive, anti-microbial, self-deodorizing and easily cleaned. The mattress meets all standards for protection of the patient and facility.

The standard OmniPressure Hyperbaric Mattress supports all patients comfortably and with optimum pressure distribution. A bariatric model is also available designed specifically to provide the same benefits to patients from 400 to 700 lbs.