omt

3

Click here to load reader

Upload: ehsan-rohani

Post on 15-Sep-2015

21 views

Category:

Documents


0 download

DESCRIPTION

ortho mode transducer

TRANSCRIPT

  • Orthomode Transducers

    11 40 GHz

    GRANTE

    GRANTEGRANTE Antenna Development and Production CorporationAntenna Development and Production Corporation

    GRANTEGRANTE Antenna Development and Production CorporationAntenna Development and Production Corporation

    tel: +36 33 512 468

    fax: +36 33 435 265

    e-mail: [email protected] t 57., EsztergomKertvros, H2509, Hungary

    post address: H2501 Esztergom, POB 84.

    http://www.grante.hu

    OMTV+H

    vertical (V)

    horizontal (H)

    Orthomode transducers separate

    horizontal and vertical polarizations

    Introduction

    Orthomode Transducers (OMTs) are 3-port microwave waveguide systems that split the input power into two parts (based on

    polarization separation), consequently, allow the simultaneous operation of two outdoor radio units (ODUs). Since the

    devices provide high inter-port isolation and low return loss, their application together with high performance antennas lead to

    use of two independent transmission channels on a single antenna at the same time.

    Application

    Orthomode Transducars can be directly mounted on antennas that have circular waveguide connector. Interfaces are

    available for several types of antennas from several manufacturers.

    The interfaces on the ODU side are upon customer's request: direct mounting for any ODU type, coaxial cable connector,

    standard waveguide flange, or any special request is available.

    (2+0) system

    outdoor units directly mounted

    on the OMT+antenna system

    Transmission capacity is doubled

    using OMT

    (2+0) Dual Polarized

    System

    ODUODU

    ODUODU

    V

    H

    f1

    f1

    OMT

  • GRANTE

    GRANTEGRANTE Antenna Development and Production CorporationAntenna Development and Production Corporation

    GRANTEGRANTE Antenna Development and Production CorporationAntenna Development and Production Corporation

    tel: +36 33 512 468

    fax: +36 33 435 265

    [email protected] t 57., EsztergomKertvros, H2509, Hungary

    post address: H2501 Esztergom, POB 84. www.grante.hu

    Upon Customers Request

    Upon Customers Request

    Upon Customers Request

    Upon Customers Request

    Orthomode Transducer Specification

    17.70019.700 GHz 21.20023.600 GHz 24.50026.500 GHz14.20015.350 GHz

    37.00039.500 GHz31.00033.400 GHz27.50029.500 GHz

    12.75013.250 GHz10.70011.700 GHz

    18 GHz 23 GHz 26 GHz15 GHz

    38 GHz32 GHz28 GHz

    13 GHz11 GHz

    0.6 dB 0.6 dB 0.8 dB0.6 dB

    1.0 dB1.0 dB1.0 dB

    0.6 dB0.6 dB

    40 dB 40 dB 38 dB40 dB

    36 dB36 dB36 dB

    40 dB40 dB

    19.1 dB 19.1 dB 19.1 dB19.1 dB

    19.1 dB19.1 dB19.1 dB

    19.1 dB19.1 dB

    Electrical Specification

    Electrical Specification

    Operating Frequency Band

    Operating Frequency Band

    Operating Frequency Range

    Operating Frequency Range

    Insertion Loss

    Insertion Loss

    Isolation inter-port

    Isolation inter-port

    Return Loss

    Return Loss

    1Interface antenna side

    1Interface antenna side

    2Interfaces ODU side

    2Interfaces ODU side

    3.4 kg3.4 kg 3.4 kg 3.4 kg 3.4 kg 3.4 kg

    3.4 kg3.4 kg3.4 kg

    Mechanical Specification

    Mechanical Specification

    3Net Weight

    3Net Weight

    Aluminium Aluminium

    AluminiumAluminiumAluminium

    AluminiumAluminium Aluminium Aluminium

    Material

    Material

    Material

    Material

    OMT 130 2ODUOMT 110 2ODU OMT 150 2ODU OMT 180 2ODU OMT 230 2ODU OMT 260 2ODU

    OMT 380 2ODUOMT 320 2ODUOMT 280 2ODU

    GRANTE Orthomode Transducer

    1Direct mounting is possible for several types of antennas

    (from several manufacturers) with circular waveguide connector. 2

    Coaxial cable connector, standard waveguide flange

    or any ODU interface is available upon request.

    3Approximate value (net weight depends on the required interfaces).

  • Ordering Information

    Orthomode Transducers

    GRANTE

    GRANTEGRANTE Antenna Development and Production CorporationAntenna Development and Production Corporation

    GRANTEGRANTE Antenna Development and Production CorporationAntenna Development and Production Corporation

    tel: +36 33 512 468

    fax: +36 33 435 265

    e-mail: [email protected] t 57., EsztergomKertvros, H2509, Hungary

    post address: H2501 Esztergom, POB 84.

    http://www.grante.hu

    Product Identification

    Examples

    1 2 3 4

    1

    2

    3

    4

    Product Type

    Frequency Band

    Interface at ODU side

    Interface at Antenna Side

    Number and type of connecting interfaces.

    Operational frequency in GHz, multiplied by 10.

    If the operational frequency range is not commonly used,

    the minimum and the maximum operational frequency is indicated here.

    G

    OMT OMT

    380 180

    2F 2NEC

    G R

    OMT

    GRANTE Interface

    Orthomode Transducer Orthomode Transducer

    frequency band: 38 GHz frequency band: 18 GHz

    two Nokia FlexiHopper ODU interfaces two NEC ODU interfaces (currently: NEO)

    GRANTE antenna interface RFS antenna interface

    with FlexiHopper fixing elements with NEC fixing elements

    (e.g. SBX1-190B NEC)

    frequency range: 37.000 39.500 GHz frequency range: 17.700 19.700 GHz

    The OMT is directly mounted on GRANTE antenna.

    The fixing elements of the OMT are the same as for the ODU.

    Orthomode Transducer

    etc. Any other interface is available upon request.

    For example: Sagem antenna interface with NEC ODU interface.

    OMT 380 2F G OMT 180 2NEC R

    OMT 380 2F G

    NEC

    A

    C(IP10)

    DW

    RAU2

    RR1/RC1

    V23

    F

    I

    SW

    SIAE

    S4

    etc.

    NEC Pasolink Interface (for most recent and/or most popular NEC ODU)

    Alcatel Interface

    Ceragon IP10 Interface

    DragonWave Horizon Interface

    Ericsson Mini-Link Interface (RAU12 = RAU1&RAU2)

    Remec RR1/RC1 Interface (Huawei, Sagem)

    Please note that this field requires further specification in some cases (e.g. at lower frequencies).

    Flange material (aluminium or brass) has to be specified.

    NEC Pasolink Interface (V23 = V2&V3)

    Nokia Flexihopper Interface

    Intracom Intralink Interface

    ISKRA (SparkWave) Interface

    SIAE Interface

    Siemens S4 Interface

    Standard Waveguide Flange (according to IEC 60154-2)

    Any other interface is available upon request.

    Oldal 1Oldal 2Oldal 3